Commit f44e78a5 authored by Loic Poulain's avatar Loic Poulain Committed by Marcel Holtmann

Bluetooth: hci_intel: Use bt_dev logging helpers

Replace BT_ logging calls by the new bt_dev ones.
Signed-off-by: default avatarLoic Poulain <loic.poulain@intel.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent b98469f4
......@@ -117,12 +117,12 @@ static int intel_wait_booting(struct hci_uart *hu)
msecs_to_jiffies(1000));
if (err == 1) {
BT_ERR("%s: Device boot interrupted", hu->hdev->name);
bt_dev_err(hu->hdev, "Device boot interrupted");
return -EINTR;
}
if (err) {
BT_ERR("%s: Device boot timeout", hu->hdev->name);
bt_dev_err(hu->hdev, "Device boot timeout");
return -ETIMEDOUT;
}
......@@ -283,11 +283,11 @@ static int intel_set_baudrate(struct hci_uart *hu, unsigned int speed)
if (err && err != ETIMEDOUT)
return err;
BT_INFO("%s: Change controller speed to %d", hdev->name, speed);
bt_dev_info(hdev, "Change controller speed to %d", speed);
speed_cmd[3] = intel_convert_speed(speed);
if (speed_cmd[3] == 0xff) {
BT_ERR("%s: Unsupported speed", hdev->name);
bt_dev_err(hdev, "Unsupported speed");
return -EINVAL;
}
......@@ -296,16 +296,15 @@ static int intel_set_baudrate(struct hci_uart *hu, unsigned int speed)
*/
skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: Reading Intel version information failed (%ld)",
hdev->name, PTR_ERR(skb));
bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
PTR_ERR(skb));
return PTR_ERR(skb);
}
kfree_skb(skb);
skb = bt_skb_alloc(sizeof(speed_cmd), GFP_KERNEL);
if (!skb) {
BT_ERR("%s: Failed to allocate memory for baudrate packet",
hdev->name);
bt_dev_err(hdev, "Failed to alloc memory for baudrate packet");
return -ENOMEM;
}
......@@ -348,7 +347,7 @@ static int intel_setup(struct hci_uart *hu)
int speed_change = 0;
int err;
BT_DBG("%s", hdev->name);
bt_dev_dbg(hdev, "start intel_setup");
hu->hdev->set_bdaddr = btintel_set_bdaddr;
......@@ -384,21 +383,21 @@ static int intel_setup(struct hci_uart *hu)
*/
skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: Reading Intel version information failed (%ld)",
hdev->name, PTR_ERR(skb));
bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
PTR_ERR(skb));
return PTR_ERR(skb);
}
if (skb->len != sizeof(*ver)) {
BT_ERR("%s: Intel version event size mismatch", hdev->name);
bt_dev_err(hdev, "Intel version event size mismatch");
kfree_skb(skb);
return -EILSEQ;
}
ver = (struct intel_version *)skb->data;
if (ver->status) {
BT_ERR("%s: Intel version command failure (%02x)",
hdev->name, ver->status);
bt_dev_err(hdev, "Intel version command failure (%02x)",
ver->status);
err = -bt_to_errno(ver->status);
kfree_skb(skb);
return err;
......@@ -408,8 +407,8 @@ static int intel_setup(struct hci_uart *hu)
* for now only accept this single value.
*/
if (ver->hw_platform != 0x37) {
BT_ERR("%s: Unsupported Intel hardware platform (%u)",
hdev->name, ver->hw_platform);
bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
ver->hw_platform);
kfree_skb(skb);
return -EINVAL;
}
......@@ -420,8 +419,8 @@ static int intel_setup(struct hci_uart *hu)
* when newer hardware variants come along.
*/
if (ver->hw_variant != 0x0b) {
BT_ERR("%s: Unsupported Intel hardware variant (%u)",
hdev->name, ver->hw_variant);
bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
ver->hw_variant);
kfree_skb(skb);
return -EINVAL;
}
......@@ -452,8 +451,8 @@ static int intel_setup(struct hci_uart *hu)
* choice is to return an error and abort the device initialization.
*/
if (ver->fw_variant != 0x06) {
BT_ERR("%s: Unsupported Intel firmware variant (%u)",
hdev->name, ver->fw_variant);
bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
ver->fw_variant);
kfree_skb(skb);
return -ENODEV;
}
......@@ -465,33 +464,33 @@ static int intel_setup(struct hci_uart *hu)
*/
skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
hdev->name, PTR_ERR(skb));
bt_dev_err(hdev, "Reading Intel boot parameters failed (%ld)",
PTR_ERR(skb));
return PTR_ERR(skb);
}
if (skb->len != sizeof(*params)) {
BT_ERR("%s: Intel boot parameters size mismatch", hdev->name);
bt_dev_err(hdev, "Intel boot parameters size mismatch");
kfree_skb(skb);
return -EILSEQ;
}
params = (struct intel_boot_params *)skb->data;
if (params->status) {
BT_ERR("%s: Intel boot parameters command failure (%02x)",
hdev->name, params->status);
bt_dev_err(hdev, "Intel boot parameters command failure (%02x)",
params->status);
err = -bt_to_errno(params->status);
kfree_skb(skb);
return err;
}
BT_INFO("%s: Device revision is %u", hdev->name,
le16_to_cpu(params->dev_revid));
bt_dev_info(hdev, "Device revision is %u",
le16_to_cpu(params->dev_revid));
BT_INFO("%s: Secure boot is %s", hdev->name,
params->secure_boot ? "enabled" : "disabled");
bt_dev_info(hdev, "Secure boot is %s",
params->secure_boot ? "enabled" : "disabled");
BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name,
bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
params->min_fw_build_nn, params->min_fw_build_cw,
2000 + params->min_fw_build_yy);
......@@ -500,8 +499,8 @@ static int intel_setup(struct hci_uart *hu)
* that this bootloader does not send them, then abort the setup.
*/
if (params->limited_cce != 0x00) {
BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
hdev->name, params->limited_cce);
bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
params->limited_cce);
kfree_skb(skb);
return -EINVAL;
}
......@@ -510,7 +509,7 @@ static int intel_setup(struct hci_uart *hu)
* also be no valid address for the operational firmware.
*/
if (!bacmp(&params->otp_bdaddr, BDADDR_ANY)) {
BT_INFO("%s: No device address configured", hdev->name);
bt_dev_info(hdev, "No device address configured");
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
}
......@@ -525,19 +524,19 @@ static int intel_setup(struct hci_uart *hu)
err = request_firmware(&fw, fwname, &hdev->dev);
if (err < 0) {
BT_ERR("%s: Failed to load Intel firmware file (%d)",
hdev->name, err);
bt_dev_err(hdev, "Failed to load Intel firmware file (%d)",
err);
kfree_skb(skb);
return err;
}
BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);
bt_dev_info(hdev, "Found device firmware: %s", fwname);
kfree_skb(skb);
if (fw->size < 644) {
BT_ERR("%s: Invalid size of firmware file (%zu)",
hdev->name, fw->size);
bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
fw->size);
err = -EBADF;
goto done;
}
......@@ -549,8 +548,7 @@ static int intel_setup(struct hci_uart *hu)
*/
err = btintel_secure_send(hdev, 0x00, 128, fw->data);
if (err < 0) {
BT_ERR("%s: Failed to send firmware header (%d)",
hdev->name, err);
bt_dev_err(hdev, "Failed to send firmware header (%d)", err);
goto done;
}
......@@ -559,8 +557,8 @@ static int intel_setup(struct hci_uart *hu)
*/
err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
if (err < 0) {
BT_ERR("%s: Failed to send firmware public key (%d)",
hdev->name, err);
bt_dev_err(hdev, "Failed to send firmware public key (%d)",
err);
goto done;
}
......@@ -569,8 +567,8 @@ static int intel_setup(struct hci_uart *hu)
*/
err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
if (err < 0) {
BT_ERR("%s: Failed to send firmware signature (%d)",
hdev->name, err);
bt_dev_err(hdev, "Failed to send firmware signature (%d)",
err);
goto done;
}
......@@ -582,8 +580,8 @@ static int intel_setup(struct hci_uart *hu)
frag_len += sizeof(*cmd) + cmd->plen;
BT_DBG("%s: patching %td/%zu", hdev->name,
(fw_ptr - fw->data), fw->size);
bt_dev_dbg(hdev, "Patching %td/%zu", (fw_ptr - fw->data),
fw->size);
/* The parameter length of the secure send command requires
* a 4 byte alignment. It happens so that the firmware file
......@@ -601,8 +599,8 @@ static int intel_setup(struct hci_uart *hu)
*/
err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
if (err < 0) {
BT_ERR("%s: Failed to send firmware data (%d)",
hdev->name, err);
bt_dev_err(hdev, "Failed to send firmware data (%d)",
err);
goto done;
}
......@@ -612,7 +610,7 @@ static int intel_setup(struct hci_uart *hu)
set_bit(STATE_FIRMWARE_LOADED, &intel->flags);
BT_INFO("%s: Waiting for firmware download to complete", hdev->name);
bt_dev_info(hdev, "Waiting for firmware download to complete");
/* Before switching the device into operational mode and with that
* booting the loaded firmware, wait for the bootloader notification
......@@ -629,19 +627,19 @@ static int intel_setup(struct hci_uart *hu)
TASK_INTERRUPTIBLE,
msecs_to_jiffies(5000));
if (err == 1) {
BT_ERR("%s: Firmware loading interrupted", hdev->name);
bt_dev_err(hdev, "Firmware loading interrupted");
err = -EINTR;
goto done;
}
if (err) {
BT_ERR("%s: Firmware loading timeout", hdev->name);
bt_dev_err(hdev, "Firmware loading timeout");
err = -ETIMEDOUT;
goto done;
}
if (test_bit(STATE_FIRMWARE_FAILED, &intel->flags)) {
BT_ERR("%s: Firmware loading failed", hdev->name);
bt_dev_err(hdev, "Firmware loading failed");
err = -ENOEXEC;
goto done;
}
......@@ -650,7 +648,7 @@ static int intel_setup(struct hci_uart *hu)
delta = ktime_sub(rettime, calltime);
duration = (unsigned long long) ktime_to_ns(delta) >> 10;
BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration);
bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
done:
release_firmware(fw);
......@@ -683,7 +681,7 @@ static int intel_setup(struct hci_uart *hu)
* 1 second. However if that happens, then just fail the setup
* since something went wrong.
*/
BT_INFO("%s: Waiting for device to boot", hdev->name);
bt_dev_info(hdev, "Waiting for device to boot");
err = intel_wait_booting(hu);
if (err)
......@@ -695,7 +693,7 @@ static int intel_setup(struct hci_uart *hu)
delta = ktime_sub(rettime, calltime);
duration = (unsigned long long) ktime_to_ns(delta) >> 10;
BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration);
bt_dev_info(hdev, "Device booted in %llu usecs", duration);
/* Enable LPM if matching pdev with wakeup enabled */
spin_lock(&intel_device_list_lock);
......@@ -713,12 +711,12 @@ static int intel_setup(struct hci_uart *hu)
if (!idev)
goto no_lpm;
BT_INFO("%s: Enabling LPM", hdev->name);
bt_dev_info(hdev, "Enabling LPM");
skb = __hci_cmd_sync(hdev, 0xfc8b, sizeof(lpm_param), lpm_param,
HCI_CMD_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: Failed to enable LPM", hdev->name);
bt_dev_err(hdev, "Failed to enable LPM");
goto no_lpm;
}
kfree_skb(skb);
......@@ -737,7 +735,7 @@ static int intel_setup(struct hci_uart *hu)
return err;
}
BT_INFO("%s: Setup complete", hdev->name);
bt_dev_info(hdev, "Setup complete");
clear_bit(STATE_BOOTLOADER, &intel->flags);
......@@ -791,7 +789,7 @@ static void intel_recv_lpm_notify(struct hci_dev *hdev, int value)
struct hci_uart *hu = hci_get_drvdata(hdev);
struct intel_data *intel = hu->priv;
BT_DBG("%s: TX idle notification (%d)", hdev->name, value);
bt_dev_dbg(hdev, "TX idle notification (%d)", value);
if (value)
set_bit(STATE_TX_ACTIVE, &intel->flags);
......@@ -809,8 +807,7 @@ static int intel_recv_lpm(struct hci_dev *hdev, struct sk_buff *skb)
intel_recv_lpm_notify(hdev, lpm->data[0]);
break;
default:
BT_ERR("%s: unknown LPM opcode (%02x)", hdev->name,
lpm->opcode);
bt_dev_err(hdev, "Unknown LPM opcode (%02x)", lpm->opcode);
break;
}
......@@ -845,7 +842,7 @@ static int intel_recv(struct hci_uart *hu, const void *data, int count)
ARRAY_SIZE(intel_recv_pkts));
if (IS_ERR(intel->rx_skb)) {
int err = PTR_ERR(intel->rx_skb);
BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
intel->rx_skb = NULL;
return err;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment