Commit f488b72d authored by Sebastian Andrzej Siewior's avatar Sebastian Andrzej Siewior Committed by John W. Linville

net/libertas: make SPI interface big endian aware

The comment (which I remove) says that the translation is done SPI routines.
IMHO this can't work because the SPI driver does not know whether the incomming
bytes are part of the registers/bytes which need to be flipped or part of
packet data which has to remain untouched.
While adding le helpers I also removed spu_write_u32() which has no users.
Tested-by: default avatarAndrey Yurovsky <andrey@cozybit.com>
Signed-off-by: default avatarSebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: default avatarDan Williams <dcbw@redhat.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 55aa4e0f
......@@ -119,9 +119,6 @@ static struct chip_ident chip_id_to_device_name[] = {
* First we have to put a SPU register name on the bus. Then we can
* either read from or write to that register.
*
* For 16-bit transactions, byte order on the bus is big-endian.
* We don't have to worry about that here, though.
* The translation takes place in the SPI routines.
*/
static void spu_transaction_init(struct if_spi_card *card)
......@@ -147,7 +144,7 @@ static void spu_transaction_finish(struct if_spi_card *card)
static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
{
int err = 0;
u16 reg_out = reg | IF_SPI_WRITE_OPERATION_MASK;
u16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK);
/* You must give an even number of bytes to the SPU, even if it
* doesn't care about the last one. */
......@@ -169,16 +166,10 @@ static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val)
{
return spu_write(card, reg, (u8 *)&val, sizeof(u16));
}
u16 buff;
static inline int spu_write_u32(struct if_spi_card *card, u16 reg, u32 val)
{
/* The lower 16 bits are written first. */
u16 out[2];
out[0] = val & 0xffff;
out[1] = (val & 0xffff0000) >> 16;
return spu_write(card, reg, (u8 *)&out, sizeof(u32));
buff = cpu_to_le16(val);
return spu_write(card, reg, (u8 *)&buff, sizeof(u16));
}
static inline int spu_reg_is_port_reg(u16 reg)
......@@ -198,7 +189,7 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len)
unsigned int i, delay;
int err = 0;
u16 zero = 0;
u16 reg_out = reg | IF_SPI_READ_OPERATION_MASK;
u16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK);
/* You must take an even number of bytes from the SPU, even if you
* don't care about the last one. */
......@@ -236,18 +227,25 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len)
/* Read 16 bits from an SPI register */
static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val)
{
return spu_read(card, reg, (u8 *)val, sizeof(u16));
u16 buf;
int ret;
ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
if (ret == 0)
*val = le16_to_cpup(&buf);
return ret;
}
/* Read 32 bits from an SPI register.
* The low 16 bits are read first. */
static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val)
{
u16 buf[2];
u32 buf;
int err;
err = spu_read(card, reg, (u8 *)buf, sizeof(u32));
err = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
if (!err)
*val = buf[0] | (buf[1] << 16);
*val = le32_to_cpup(&buf);
return err;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment