Commit f4cfa36d authored by Tony Lindgren's avatar Tony Lindgren

dmaengine: ti: omap-dma: Use cpu notifier to block idle for omap2

For omap2, we need to block idle if SDMA is busy. Let's do this with a
cpu notifier and remove the custom call.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Vinod Koul <vkoul@kernel.org>
Acked-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: default avatarVinod Koul <vkoul@kernel.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 61ecb539
......@@ -83,8 +83,6 @@ static int omap2_enter_full_retention(void)
l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
cpu_cluster_pm_enter();
/* One last check for pending IRQs to avoid extra latency due
* to sleeping unnecessarily. */
if (omap_irq_pending())
......@@ -96,8 +94,6 @@ static int omap2_enter_full_retention(void)
OMAP_SDRC_REGADDR(SDRC_POWER));
no_sleep:
cpu_cluster_pm_exit();
clk_enable(osc_ck);
/* clear CORE wake-up events */
......@@ -162,25 +158,27 @@ static int omap2_can_sleep(void)
return 0;
if (__clk_is_enabled(osc_ck))
return 0;
if (omap_dma_running())
return 0;
return 1;
}
static void omap2_pm_idle(void)
{
if (!omap2_can_sleep()) {
int error;
if (omap_irq_pending())
return;
error = cpu_cluster_pm_enter();
if (error || !omap2_can_sleep()) {
omap2_enter_mpu_retention();
return;
goto out_cpu_cluster_pm;
}
if (omap_irq_pending())
return;
omap2_enter_full_retention();
out_cpu_cluster_pm:
cpu_cluster_pm_exit();
}
static void __init prcm_setup_regs(void)
......
......@@ -27,6 +27,7 @@
struct omap_dma_config {
int lch_end;
unsigned int rw_priority:1;
unsigned int needs_busy_check:1;
unsigned int may_lose_context:1;
unsigned int needs_lch_clear:1;
};
......@@ -1521,6 +1522,38 @@ static void omap_dma_free(struct omap_dmadev *od)
}
}
/* Currently only used for omap2. For omap1, also a check for lcd_dma is needed */
static int omap_dma_busy_notifier(struct notifier_block *nb,
unsigned long cmd, void *v)
{
struct omap_dmadev *od;
struct omap_chan *c;
int lch = -1;
od = container_of(nb, struct omap_dmadev, nb);
switch (cmd) {
case CPU_CLUSTER_PM_ENTER:
while (1) {
lch = find_next_bit(od->lch_bitmap, od->lch_count,
lch + 1);
if (lch >= od->lch_count)
break;
c = od->lch_map[lch];
if (!c)
continue;
if (omap_dma_chan_read(c, CCR) & CCR_ENABLE)
return NOTIFY_BAD;
}
break;
case CPU_CLUSTER_PM_ENTER_FAILED:
case CPU_CLUSTER_PM_EXIT:
break;
}
return NOTIFY_OK;
}
/*
* We are using IRQENABLE_L1, and legacy DMA code was using IRQENABLE_L0.
* As the DSP may be using IRQENABLE_L2 and L3, let's not touch those for
......@@ -1778,7 +1811,10 @@ static int omap_dma_probe(struct platform_device *pdev)
omap_dma_init_gcr(od, DMA_DEFAULT_ARB_RATE, DMA_DEFAULT_FIFO_DEPTH, 0);
if (od->cfg->may_lose_context) {
if (od->cfg->needs_busy_check) {
od->nb.notifier_call = omap_dma_busy_notifier;
cpu_pm_register_notifier(&od->nb);
} else if (od->cfg->may_lose_context) {
od->nb.notifier_call = omap_dma_context_notifier;
cpu_pm_register_notifier(&od->nb);
}
......@@ -1822,6 +1858,7 @@ static const struct omap_dma_config omap2420_data = {
.lch_end = CCFN,
.rw_priority = true,
.needs_lch_clear = true,
.needs_busy_check = true,
};
static const struct omap_dma_config omap2430_data = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment