Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] fix kprobes single stepping
  [S390] tape: fix dbf usage
  [S390] dasd: provide a Sense Path Group ID ioctl
  [S390] ftrace: select HAVE_C_RECORDMCOUNT
  [S390] vdso: get rid of redefinition warnings
  [S390] facility detection: remove unused variable
  [S390] hypfs: Fix error handling in hypfs_diag initialization
  [S390] topology: fix cpu masks for topology=off case
  [S390] topology: add SCHED_MC config option
  [S390] Kconfig: add machine type number to code generation options
  [S390] Add z196 machine type to setup_hwcaps

arch/s390/Kconfig

@@ -80,6 +80,7 @@ config S390
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_C_RECORDMCOUNT
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_GRAPH_TRACER
@@ -144,7 +145,7 @@ source "kernel/time/Kconfig"
 config 64BIT
 	bool "64 bit kernel"
 	help
-	  Select this option if you have a 64 bit IBM zSeries machine
+	  Select this option if you have an IBM z/Architecture machine
 	  and want to use the 64 bit addressing mode.
 
 config 32BIT
@@ -196,9 +197,18 @@ config HOTPLUG_CPU
 	  can be controlled through /sys/devices/system/cpu/cpu#.
 	  Say N if you want to disable CPU hotplug.
 
+config SCHED_MC
+	def_bool y
+	prompt "Multi-core scheduler support"
+	depends on SMP
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places.
+
 config SCHED_BOOK
 	bool "Book scheduler support"
-	depends on SMP
+	depends on SMP && SCHED_MC
 	help
 	  Book scheduler support improves the CPU scheduler's decision making
 	  when dealing with machines that have several books.
@@ -208,7 +218,7 @@ config MATHEMU
 	depends on MARCH_G5
 	help
 	  This option is required for IEEE compliant floating point arithmetic
-	  on older S/390 machines. Say Y unless you know your machine doesn't
+	  on older ESA/390 machines. Say Y unless you know your machine doesn't
 	  need this.
 
 config COMPAT
@@ -237,8 +247,8 @@ config S390_EXEC_PROTECT
 	  space programs and it also selects the addressing mode option above.
 	  The kernel parameter noexec=on will enable this feature and also
 	  switch the addressing modes, default is disabled. Enabling this (via
-	  kernel parameter) on machines earlier than IBM System z9-109 EC/BC
-	  will reduce system performance.
+	  kernel parameter) on machines earlier than IBM System z9 this will
+	  reduce system performance.
 
 comment "Code generation options"
 
@@ -247,49 +257,46 @@ choice
 	default MARCH_G5
 
 config MARCH_G5
-	bool "S/390 model G5 and G6"
+	bool "System/390 model G5 and G6"
 	depends on !64BIT
 	help
 	  Select this to build a 31 bit kernel that works
-	  on all S/390 and zSeries machines.
+	  on all ESA/390 and z/Architecture machines.
 
 config MARCH_Z900
-	bool "IBM eServer zSeries model z800 and z900"
+	bool "IBM zSeries model z800 and z900"
 	help
-	  Select this to optimize for zSeries machines. This
-	  will enable some optimizations that are not available
-	  on older 31 bit only CPUs.
+	  Select this to enable optimizations for model z800/z900 (2064 and
+	  2066 series). This will enable some optimizations that are not
+	  available on older ESA/390 (31 Bit) only CPUs.
 
 config MARCH_Z990
-	bool "IBM eServer zSeries model z890 and z990"
+	bool "IBM zSeries model z890 and z990"
 	help
-	  Select this enable optimizations for model z890/z990.
-	  This will be slightly faster but does not work on
-	  older machines such as the z900.
+	  Select this to enable optimizations for model z890/z990 (2084 and
+	  2086 series). The kernel will be slightly faster but will not work
+	  on older machines.
 
 config MARCH_Z9_109
 	bool "IBM System z9"
 	help
-	  Select this to enable optimizations for IBM System z9-109, IBM
-	  System z9 Enterprise Class (z9 EC), and IBM System z9 Business
-	  Class (z9 BC). The kernel will be slightly faster but will not
-	  work on older machines such as the z990, z890, z900, and z800.
+	  Select this to enable optimizations for IBM System z9 (2094 and
+	  2096 series). The kernel will be slightly faster but will not work
+	  on older machines.
 
 config MARCH_Z10
 	bool "IBM System z10"
 	help
-	  Select this to enable optimizations for IBM System z10. The
-	  kernel will be slightly faster but will not work on older
-	  machines such as the z990, z890, z900, z800, z9-109, z9-ec
-	  and z9-bc.
+	  Select this to enable optimizations for IBM System z10 (2097 and
+	  2098 series). The kernel will be slightly faster but will not work
+	  on older machines.
 
 config MARCH_Z196
 	bool "IBM zEnterprise 196"
 	help
-	  Select this to enable optimizations for IBM zEnterprise 196.
-	  The kernel will be slightly faster but will not work on older
-	  machines such as the z990, z890, z900, z800, z9-109, z9-ec,
-	  z9-bc, z10-ec and z10-bc.
+	  Select this to enable optimizations for IBM zEnterprise 196
+	  (2817 series). The kernel will be slightly faster but will not work
+	  on older machines.
 
 endchoice
 

arch/s390/hypfs/hypfs_diag.c

@@ -638,18 +638,21 @@ __init int hypfs_diag_init(void)
 		pr_err("The hardware system does not support hypfs\n");
 		return -ENODATA;
 	}
+	if (diag204_info_type == INFO_EXT) {
+		rc = hypfs_dbfs_init();
+		if (rc)
+			return rc;
+	}
+	if (MACHINE_IS_LPAR) {
 		rc = diag224_get_name_table();
 		if (rc) {
-		diag204_free_buffer();
 			pr_err("The hardware system does not provide all "
 			       "functions required by hypfs\n");
+			debugfs_remove(dbfs_d204_file);
+			return rc;
 		}
-	if (diag204_info_type == INFO_EXT) {
-		rc = hypfs_dbfs_init();
-		if (rc)
-			diag204_free_buffer();
 	}
-	return rc;
+	return 0;
 }
 
 void hypfs_diag_exit(void)

arch/s390/include/asm/dasd.h

@@ -217,6 +217,25 @@ typedef struct dasd_symmio_parms {
 	int rssd_result_len;
 } __attribute__ ((packed)) dasd_symmio_parms_t;
 
+/*
+ * Data returned by Sense Path Group ID (SNID)
+ */
+struct dasd_snid_data {
+	struct {
+		__u8 group:2;
+		__u8 reserve:2;
+		__u8 mode:1;
+		__u8 res:3;
+	} __attribute__ ((packed)) path_state;
+	__u8 pgid[11];
+} __attribute__ ((packed));
+
+struct dasd_snid_ioctl_data {
+	struct dasd_snid_data data;
+	__u8 path_mask;
+} __attribute__ ((packed));
+
+
 /********************************************************************************
  * SECTION: Definition of IOCTLs
  *
@@ -261,25 +280,10 @@ typedef struct dasd_symmio_parms {
 /* Set Attributes (cache operations) */
 #define BIODASDSATTR   _IOW(DASD_IOCTL_LETTER,2,attrib_data_t) 
 
+/* Get Sense Path Group ID (SNID) data */
+#define BIODASDSNID    _IOWR(DASD_IOCTL_LETTER, 1, struct dasd_snid_ioctl_data)
+
 #define BIODASDSYMMIO  _IOWR(DASD_IOCTL_LETTER, 240, dasd_symmio_parms_t)
 
 #endif				/* DASD_H */
 
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4 
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: nil
- * tab-width: 8
- * End:
- */

arch/s390/kernel/asm-offsets.c

@@ -66,9 +66,9 @@ int main(void)
 	DEFINE(__VDSO_ECTG_BASE, offsetof(struct vdso_per_cpu_data, ectg_timer_base));
 	DEFINE(__VDSO_ECTG_USER, offsetof(struct vdso_per_cpu_data, ectg_user_time));
 	/* constants used by the vdso */
-	DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
-	DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
-	DEFINE(CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC);
+	DEFINE(__CLOCK_REALTIME, CLOCK_REALTIME);
+	DEFINE(__CLOCK_MONOTONIC, CLOCK_MONOTONIC);
+	DEFINE(__CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC);
 	BLANK();
 	/* constants for SIGP */
 	DEFINE(__SIGP_STOP, sigp_stop);

arch/s390/kernel/early.c

@@ -282,8 +282,6 @@ static noinline __init void setup_facility_list(void)
 static noinline __init void setup_hpage(void)
 {
 #ifndef CONFIG_DEBUG_PAGEALLOC
-	unsigned int facilities;
-
 	if (!test_facility(2) || !test_facility(8))
 		return;
 	S390_lowcore.machine_flags |= MACHINE_FLAG_HPAGE;

arch/s390/kernel/entry.S

@@ -557,6 +557,7 @@ pgm_svcper:
 # per was called from kernel, must be kprobes
 #
 kernel_per:
+	REENABLE_IRQS
 	mvi	SP_SVCNR(%r15),0xff	# set trap indication to pgm check
 	mvi	SP_SVCNR+1(%r15),0xff
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area

arch/s390/kernel/entry64.S

@@ -568,6 +568,7 @@ pgm_svcper:
 # per was called from kernel, must be kprobes
 #
 kernel_per:
+	REENABLE_IRQS
 	xc	SP_SVCNR(2,%r15),SP_SVCNR(%r15)	# clear svc number
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	brasl	%r14,do_single_step

arch/s390/kernel/kprobes.c

@@ -316,6 +316,8 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 		return 1;
 
 ss_probe:
+	if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
+		local_irq_disable();
 	prepare_singlestep(p, regs);
 	kcb->kprobe_status = KPROBE_HIT_SS;
 	return 1;
@@ -463,6 +465,8 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 		goto out;
 	}
 	reset_current_kprobe();
+	if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
+		local_irq_enable();
 out:
 	preempt_enable_no_resched();
 
@@ -502,8 +506,11 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 		regs->psw.mask |= kcb->kprobe_saved_imask;
 		if (kcb->kprobe_status == KPROBE_REENTER)
 			restore_previous_kprobe(kcb);
-		else
+		else {
 			reset_current_kprobe();
+			if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
+				local_irq_enable();
+		}
 		preempt_enable_no_resched();
 		break;
 	case KPROBE_HIT_ACTIVE:

arch/s390/kernel/setup.c

@@ -761,6 +761,9 @@ static void __init setup_hwcaps(void)
 	case 0x2098:
 		strcpy(elf_platform, "z10");
 		break;
+	case 0x2817:
+		strcpy(elf_platform, "z196");
+		break;
 	}
 }
 

arch/s390/kernel/sysinfo.c

@@ -106,11 +106,13 @@ static int stsi_15_1_x(struct sysinfo_15_1_x *info, char *page, int len)
 	for (i = 0; i < TOPOLOGY_NR_MAG; i++)
 		len += sprintf(page + len, " %d", info->mag[i]);
 	len += sprintf(page + len, "\n");
+#ifdef CONFIG_SCHED_MC
 	store_topology(info);
 	len += sprintf(page + len, "CPU Topology SW:     ");
 	for (i = 0; i < TOPOLOGY_NR_MAG; i++)
 		len += sprintf(page + len, " %d", info->mag[i]);
 	len += sprintf(page + len, "\n");
+#endif
 	return len;
 }
 

arch/s390/kernel/topology.c

@@ -53,8 +53,10 @@ static cpumask_t cpu_group_map(struct mask_info *info, unsigned int cpu)
 	cpumask_t mask;
 
 	cpus_clear(mask);
-	if (!topology_enabled || !MACHINE_HAS_TOPOLOGY)
-		return cpu_possible_map;
+	if (!topology_enabled || !MACHINE_HAS_TOPOLOGY) {
+		cpumask_copy(&mask, cpumask_of(cpu));
+		return mask;
+	}
 	while (info) {
 		if (cpu_isset(cpu, info->mask)) {
 			mask = info->mask;

arch/s390/kernel/vdso32/clock_getres.S

@@ -19,9 +19,9 @@
 	.type  __kernel_clock_getres,@function
 __kernel_clock_getres:
 	.cfi_startproc
-	chi	%r2,CLOCK_REALTIME
+	chi	%r2,__CLOCK_REALTIME
 	je	0f
-	chi	%r2,CLOCK_MONOTONIC
+	chi	%r2,__CLOCK_MONOTONIC
 	jne	3f
 0:	ltr	%r3,%r3
 	jz	2f				/* res == NULL */
@@ -34,6 +34,6 @@ __kernel_clock_getres:
 3:	lhi	%r1,__NR_clock_getres		/* fallback to svc */
 	svc	0
 	br	%r14
-4:	.long	CLOCK_REALTIME_RES
+4:	.long	__CLOCK_REALTIME_RES
 	.cfi_endproc
 	.size	__kernel_clock_getres,.-__kernel_clock_getres

arch/s390/kernel/vdso32/clock_gettime.S

@@ -21,9 +21,9 @@ __kernel_clock_gettime:
 	.cfi_startproc
 	basr	%r5,0
 0:	al	%r5,21f-0b(%r5)			/* get &_vdso_data */
-	chi	%r2,CLOCK_REALTIME
+	chi	%r2,__CLOCK_REALTIME
 	je	10f
-	chi	%r2,CLOCK_MONOTONIC
+	chi	%r2,__CLOCK_MONOTONIC
 	jne	19f
 
 	/* CLOCK_MONOTONIC */

arch/s390/kernel/vdso64/clock_getres.S

@@ -19,9 +19,9 @@
 	.type  __kernel_clock_getres,@function
 __kernel_clock_getres:
 	.cfi_startproc
-	cghi	%r2,CLOCK_REALTIME
+	cghi	%r2,__CLOCK_REALTIME
 	je	0f
-	cghi	%r2,CLOCK_MONOTONIC
+	cghi	%r2,__CLOCK_MONOTONIC
 	je	0f
 	cghi	%r2,-2		/* CLOCK_THREAD_CPUTIME_ID for this thread */
 	jne	2f
@@ -39,6 +39,6 @@ __kernel_clock_getres:
 2:	lghi	%r1,__NR_clock_getres		/* fallback to svc */
 	svc	0
 	br	%r14
-3:	.quad	CLOCK_REALTIME_RES
+3:	.quad	__CLOCK_REALTIME_RES
 	.cfi_endproc
 	.size	__kernel_clock_getres,.-__kernel_clock_getres

arch/s390/kernel/vdso64/clock_gettime.S

@@ -20,11 +20,11 @@
 __kernel_clock_gettime:
 	.cfi_startproc
 	larl	%r5,_vdso_data
-	cghi	%r2,CLOCK_REALTIME
+	cghi	%r2,__CLOCK_REALTIME
 	je	4f
 	cghi	%r2,-2		/* CLOCK_THREAD_CPUTIME_ID for this thread */
 	je	9f
-	cghi	%r2,CLOCK_MONOTONIC
+	cghi	%r2,__CLOCK_MONOTONIC
 	jne	12f
 
 	/* CLOCK_MONOTONIC */

drivers/s390/block/dasd_eckd.c

@@ -2801,6 +2801,73 @@ dasd_eckd_steal_lock(struct dasd_device *device)
 	return rc;
 }
 
+/*
+ * SNID - Sense Path Group ID
+ * This ioctl may be used in situations where I/O is stalled due to
+ * a reserve, so if the normal dasd_smalloc_request fails, we use the
+ * preallocated dasd_reserve_req.
+ */
+static int dasd_eckd_snid(struct dasd_device *device,
+			  void __user *argp)
+{
+	struct dasd_ccw_req *cqr;
+	int rc;
+	struct ccw1 *ccw;
+	int useglobal;
+	struct dasd_snid_ioctl_data usrparm;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
+		return -EFAULT;
+
+	useglobal = 0;
+	cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1,
+				   sizeof(struct dasd_snid_data), device);
+	if (IS_ERR(cqr)) {
+		mutex_lock(&dasd_reserve_mutex);
+		useglobal = 1;
+		cqr = &dasd_reserve_req->cqr;
+		memset(cqr, 0, sizeof(*cqr));
+		memset(&dasd_reserve_req->ccw, 0,
+		       sizeof(dasd_reserve_req->ccw));
+		cqr->cpaddr = &dasd_reserve_req->ccw;
+		cqr->data = &dasd_reserve_req->data;
+		cqr->magic = DASD_ECKD_MAGIC;
+	}
+	ccw = cqr->cpaddr;
+	ccw->cmd_code = DASD_ECKD_CCW_SNID;
+	ccw->flags |= CCW_FLAG_SLI;
+	ccw->count = 12;
+	ccw->cda = (__u32)(addr_t) cqr->data;
+	cqr->startdev = device;
+	cqr->memdev = device;
+	clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
+	set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
+	cqr->retries = 5;
+	cqr->expires = 10 * HZ;
+	cqr->buildclk = get_clock();
+	cqr->status = DASD_CQR_FILLED;
+	cqr->lpm = usrparm.path_mask;
+
+	rc = dasd_sleep_on_immediatly(cqr);
+	/* verify that I/O processing didn't modify the path mask */
+	if (!rc && usrparm.path_mask && (cqr->lpm != usrparm.path_mask))
+		rc = -EIO;
+	if (!rc) {
+		usrparm.data = *((struct dasd_snid_data *)cqr->data);
+		if (copy_to_user(argp, &usrparm, sizeof(usrparm)))
+			rc = -EFAULT;
+	}
+
+	if (useglobal)
+		mutex_unlock(&dasd_reserve_mutex);
+	else
+		dasd_sfree_request(cqr, cqr->memdev);
+	return rc;
+}
+
 /*
  * Read performance statistics
  */
@@ -3036,6 +3103,8 @@ dasd_eckd_ioctl(struct dasd_block *block, unsigned int cmd, void __user *argp)
 		return dasd_eckd_reserve(device);
 	case BIODASDSLCK:
 		return dasd_eckd_steal_lock(device);
+	case BIODASDSNID:
+		return dasd_eckd_snid(device, argp);
 	case BIODASDSYMMIO:
 		return dasd_symm_io(device, argp);
 	default:

drivers/s390/block/dasd_eckd.h

@@ -27,6 +27,7 @@
 #define DASD_ECKD_CCW_WRITE_CKD		 0x1d
 #define DASD_ECKD_CCW_READ_CKD		 0x1e
 #define DASD_ECKD_CCW_PSF		 0x27
+#define DASD_ECKD_CCW_SNID		 0x34
 #define DASD_ECKD_CCW_RSSD		 0x3e
 #define DASD_ECKD_CCW_LOCATE_RECORD	 0x47
 #define DASD_ECKD_CCW_SNSS		 0x54

drivers/s390/char/tape_core.c

@@ -1077,15 +1077,14 @@ __tape_do_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 		/* FIXME: What to do with the request? */
 		switch (PTR_ERR(irb)) {
 			case -ETIMEDOUT:
-				DBF_LH(1, "(%s): Request timed out\n",
-					dev_name(&cdev->dev));
+				DBF_LH(1, "(%08x): Request timed out\n",
+				       device->cdev_id);
 			case -EIO:
 				__tape_end_request(device, request, -EIO);
 				break;
 			default:
-				DBF_LH(1, "(%s): Unexpected i/o error %li\n",
-					dev_name(&cdev->dev),
-					PTR_ERR(irb));
+				DBF_LH(1, "(%08x): Unexpected i/o error %li\n",
+				       device->cdev_id,	PTR_ERR(irb));
 		}
 		return;
 	}

drivers/s390/char/tape_std.c

@@ -47,8 +47,8 @@ tape_std_assign_timeout(unsigned long data)
 			device->cdev_id);
 	rc = tape_cancel_io(device, request);
 	if(rc)
-		DBF_EVENT(3, "(%s): Assign timeout: Cancel failed with rc = %i\n",
-			dev_name(&device->cdev->dev), rc);
+		DBF_EVENT(3, "(%08x): Assign timeout: Cancel failed with rc = "
+			  "%i\n", device->cdev_id, rc);
 }
 
 int