Merge branch 'ib-mfd-input-regulator-6.11' into ibs-for-mfd-merged

Documentation/devicetree/bindings/mfd/marvell,88pm886-a1.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/marvell,88pm886-a1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell 88PM886 PMIC core
+
+maintainers:
+  - Karel Balej <balejk@matfyz.cz>
+
+description:
+  Marvell 88PM886 is a PMIC providing several functions such as onkey,
+  regulators or battery and charger.
+
+properties:
+  compatible:
+    const: marvell,88pm886-a1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(ldo(1[0-6]|[1-9])|buck[1-5])$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        description: LDO or buck regulator.
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@30 {
+        compatible = "marvell,88pm886-a1";
+        reg = <0x30>;
+        interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&gic>;
+        wakeup-source;
+
+        regulators {
+          ldo2: ldo2 {
+            regulator-min-microvolt = <3100000>;
+            regulator-max-microvolt = <3300000>;
+          };
+
+          ldo15: ldo15 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+          };
+
+          buck2: buck2 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+          };
+        };
+      };
+    };
+...

MAINTAINERS

@@ -13312,6 +13312,15 @@ F:	drivers/net/dsa/mv88e6xxx/
 F:	include/linux/dsa/mv88e6xxx.h
 F:	include/linux/platform_data/mv88e6xxx.h
 
+MARVELL 88PM886 PMIC DRIVER
+M:	Karel Balej <balejk@matfyz.cz>
+S:	Maintained
+F:	Documentation/devicetree/bindings/mfd/marvell,88pm886-a1.yaml
+F:	drivers/input/misc/88pm886-onkey.c
+F:	drivers/mfd/88pm886.c
+F:	drivers/regulators/88pm886-regulator.c
+F:	include/linux/mfd/88pm886.h
+
 MARVELL ARMADA 3700 PHY DRIVERS
 M:	Miquel Raynal <miquel.raynal@bootlin.com>
 S:	Maintained

drivers/input/misc/88pm886-onkey.c

+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/88pm886.h>
+
+struct pm886_onkey {
+	struct input_dev *idev;
+	struct pm886_chip *chip;
+};
+
+static irqreturn_t pm886_onkey_irq_handler(int irq, void *data)
+{
+	struct pm886_onkey *onkey = data;
+	struct regmap *regmap = onkey->chip->regmap;
+	struct input_dev *idev = onkey->idev;
+	struct device *parent = idev->dev.parent;
+	unsigned int val;
+	int err;
+
+	err = regmap_read(regmap, PM886_REG_STATUS1, &val);
+	if (err) {
+		dev_err(parent, "Failed to read status: %d\n", err);
+		return IRQ_NONE;
+	}
+	val &= PM886_ONKEY_STS1;
+
+	input_report_key(idev, KEY_POWER, val);
+	input_sync(idev);
+
+	return IRQ_HANDLED;
+}
+
+static int pm886_onkey_probe(struct platform_device *pdev)
+{
+	struct pm886_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct pm886_onkey *onkey;
+	struct input_dev *idev;
+	int irq, err;
+
+	onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL);
+	if (!onkey)
+		return -ENOMEM;
+
+	onkey->chip = chip;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return dev_err_probe(dev, irq, "Failed to get IRQ\n");
+
+	idev = devm_input_allocate_device(dev);
+	if (!idev) {
+		dev_err(dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+	onkey->idev = idev;
+
+	idev->name = "88pm886-onkey";
+	idev->phys = "88pm886-onkey/input0";
+	idev->id.bustype = BUS_I2C;
+
+	input_set_capability(idev, EV_KEY, KEY_POWER);
+
+	err = devm_request_threaded_irq(dev, irq, NULL, pm886_onkey_irq_handler,
+					IRQF_ONESHOT | IRQF_NO_SUSPEND, "onkey",
+					onkey);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to request IRQ\n");
+
+	err = input_register_device(idev);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to register input device\n");
+
+	return 0;
+}
+
+static const struct platform_device_id pm886_onkey_id_table[] = {
+	{ "88pm886-onkey", },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, pm886_onkey_id_table);
+
+static struct platform_driver pm886_onkey_driver = {
+	.driver = {
+		.name = "88pm886-onkey",
+	},
+	.probe = pm886_onkey_probe,
+	.id_table = pm886_onkey_id_table,
+};
+module_platform_driver(pm886_onkey_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM886 onkey driver");
+MODULE_AUTHOR("Karel Balej <balejk@matfyz.cz>");
+MODULE_LICENSE("GPL");

drivers/input/misc/Kconfig

@@ -33,6 +33,13 @@ config INPUT_88PM80X_ONKEY
 	  To compile this driver as a module, choose M here: the module
 	  will be called 88pm80x_onkey.
 
+config INPUT_88PM886_ONKEY
+	tristate "Marvell 88PM886 onkey support"
+	depends on MFD_88PM886_PMIC
+	help
+	  Support the onkey of Marvell 88PM886 PMIC as an input device
+	  reporting power button status.
+
 config INPUT_AB8500_PONKEY
 	tristate "AB8500 Pon (PowerOn) Key"
 	depends on AB8500_CORE

drivers/input/misc/Makefile

@@ -7,6 +7,7 @@
 
 obj-$(CONFIG_INPUT_88PM860X_ONKEY)	+= 88pm860x_onkey.o
 obj-$(CONFIG_INPUT_88PM80X_ONKEY)	+= 88pm80x_onkey.o
+obj-$(CONFIG_INPUT_88PM886_ONKEY)	+= 88pm886-onkey.o
 obj-$(CONFIG_INPUT_AB8500_PONKEY)	+= ab8500-ponkey.o
 obj-$(CONFIG_INPUT_AD714X)		+= ad714x.o
 obj-$(CONFIG_INPUT_AD714X_I2C)		+= ad714x-i2c.o

drivers/mfd/88pm886.c

+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/88pm886.h>
+
+static const struct regmap_config pm886_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = PM886_REG_RTC_SPARE6,
+};
+
+static struct regmap_irq pm886_regmap_irqs[] = {
+	REGMAP_IRQ_REG(PM886_IRQ_ONKEY, 0, PM886_INT_ENA1_ONKEY),
+};
+
+static struct regmap_irq_chip pm886_regmap_irq_chip = {
+	.name = "88pm886",
+	.irqs = pm886_regmap_irqs,
+	.num_irqs = ARRAY_SIZE(pm886_regmap_irqs),
+	.num_regs = 4,
+	.status_base = PM886_REG_INT_STATUS1,
+	.ack_base = PM886_REG_INT_STATUS1,
+	.unmask_base = PM886_REG_INT_ENA_1,
+};
+
+static struct resource pm886_onkey_resources[] = {
+	DEFINE_RES_IRQ_NAMED(PM886_IRQ_ONKEY, "88pm886-onkey"),
+};
+
+static struct mfd_cell pm886_devs[] = {
+	MFD_CELL_RES("88pm886-onkey", pm886_onkey_resources),
+	MFD_CELL_NAME("88pm886-regulator"),
+};
+
+static int pm886_power_off_handler(struct sys_off_data *sys_off_data)
+{
+	struct pm886_chip *chip = sys_off_data->cb_data;
+	struct regmap *regmap = chip->regmap;
+	struct device *dev = &chip->client->dev;
+	int err;
+
+	err = regmap_update_bits(regmap, PM886_REG_MISC_CONFIG1, PM886_SW_PDOWN, PM886_SW_PDOWN);
+	if (err) {
+		dev_err(dev, "Failed to power off the device: %d\n", err);
+		return NOTIFY_BAD;
+	}
+	return NOTIFY_DONE;
+}
+
+static int pm886_setup_irq(struct pm886_chip *chip,
+		struct regmap_irq_chip_data **irq_data)
+{
+	struct regmap *regmap = chip->regmap;
+	struct device *dev = &chip->client->dev;
+	int err;
+
+	/* Set interrupt clearing mode to clear on write. */
+	err = regmap_update_bits(regmap, PM886_REG_MISC_CONFIG2,
+			PM886_INT_INV | PM886_INT_CLEAR | PM886_INT_MASK_MODE,
+			PM886_INT_WC);
+	if (err) {
+		dev_err(dev, "Failed to set interrupt clearing mode: %d\n", err);
+		return err;
+	}
+
+	err = devm_regmap_add_irq_chip(dev, regmap, chip->client->irq,
+					IRQF_ONESHOT, 0, &pm886_regmap_irq_chip,
+					irq_data);
+	if (err) {
+		dev_err(dev, "Failed to request IRQ: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int pm886_probe(struct i2c_client *client)
+{
+	struct regmap_irq_chip_data *irq_data;
+	struct device *dev = &client->dev;
+	struct pm886_chip *chip;
+	struct regmap *regmap;
+	unsigned int chip_id;
+	int err;
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->client = client;
+	chip->chip_id = (uintptr_t)device_get_match_data(dev);
+	i2c_set_clientdata(client, chip);
+
+	regmap = devm_regmap_init_i2c(client, &pm886_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap), "Failed to initialize regmap\n");
+	chip->regmap = regmap;
+
+	err = regmap_read(regmap, PM886_REG_ID, &chip_id);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to read chip ID\n");
+
+	if (chip->chip_id != chip_id)
+		return dev_err_probe(dev, -EINVAL, "Unsupported chip: 0x%x\n", chip_id);
+
+	err = pm886_setup_irq(chip, &irq_data);
+	if (err)
+		return err;
+
+	err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, pm886_devs, ARRAY_SIZE(pm886_devs),
+				NULL, 0, regmap_irq_get_domain(irq_data));
+	if (err)
+		return dev_err_probe(dev, err, "Failed to add devices\n");
+
+	err = devm_register_power_off_handler(dev, pm886_power_off_handler, chip);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to register power off handler\n");
+
+	device_init_wakeup(dev, device_property_read_bool(dev, "wakeup-source"));
+
+	return 0;
+}
+
+static const struct of_device_id pm886_of_match[] = {
+	{ .compatible = "marvell,88pm886-a1", .data = (void *)PM886_A1_CHIP_ID },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pm886_of_match);
+
+static struct i2c_driver pm886_i2c_driver = {
+	.driver = {
+		.name = "88pm886",
+		.of_match_table = pm886_of_match,
+	},
+	.probe = pm886_probe,
+};
+module_i2c_driver(pm886_i2c_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM886 PMIC driver");
+MODULE_AUTHOR("Karel Balej <balejk@matfyz.cz>");
+MODULE_LICENSE("GPL");

drivers/mfd/Kconfig

@@ -794,6 +794,18 @@ config MFD_88PM860X
 	  select individual components like voltage regulators, RTC and
 	  battery-charger under the corresponding menus.
 
+config MFD_88PM886_PMIC
+	bool "Marvell 88PM886 PMIC"
+	depends on I2C=y
+	depends on OF
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	select MFD_CORE
+	help
+	  This enables support for Marvell 88PM886 Power Management IC.
+	  This includes the I2C driver and the core APIs _only_, you have to
+	  select individual components like onkey under the corresponding menus.
+
 config MFD_MAX14577
 	tristate "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support"
 	depends on I2C

drivers/mfd/Makefile

@@ -7,6 +7,7 @@
 obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x.o
 obj-$(CONFIG_MFD_88PM800)	+= 88pm800.o 88pm80x.o
 obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
+obj-$(CONFIG_MFD_88PM886_PMIC)	+= 88pm886.o
 obj-$(CONFIG_MFD_ACT8945A)	+= act8945a.o
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835-pm.o

drivers/regulator/88pm886-regulator.c

+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/88pm886.h>
+
+static const struct regmap_config pm886_regulator_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = PM886_REG_BUCK5_VOUT,
+};
+
+static const struct regulator_ops pm886_ldo_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops pm886_buck_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static const unsigned int pm886_ldo_volt_table1[] = {
+	1700000, 1800000, 1900000, 2500000, 2800000, 2900000, 3100000, 3300000,
+};
+
+static const unsigned int pm886_ldo_volt_table2[] = {
+	1200000, 1250000, 1700000, 1800000, 1850000, 1900000, 2500000, 2600000,
+	2700000, 2750000, 2800000, 2850000, 2900000, 3000000, 3100000, 3300000,
+};
+
+static const unsigned int pm886_ldo_volt_table3[] = {
+	1700000, 1800000, 1900000, 2000000, 2100000, 2500000, 2700000, 2800000,
+};
+
+static const struct linear_range pm886_buck_volt_ranges1[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 79, 12500),
+	REGULATOR_LINEAR_RANGE(1600000, 80, 84, 50000),
+};
+
+static const struct linear_range pm886_buck_volt_ranges2[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 79, 12500),
+	REGULATOR_LINEAR_RANGE(1600000, 80, 114, 50000),
+};
+
+static struct regulator_desc pm886_regulators[] = {
+	{
+		.name = "LDO1",
+		.regulators_node = "regulators",
+		.of_match = "ldo1",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN1,
+		.enable_mask = BIT(0),
+		.volt_table = pm886_ldo_volt_table1,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table1),
+		.vsel_reg = PM886_REG_LDO1_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO2",
+		.regulators_node = "regulators",
+		.of_match = "ldo2",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN1,
+		.enable_mask = BIT(1),
+		.volt_table = pm886_ldo_volt_table1,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table1),
+		.vsel_reg = PM886_REG_LDO2_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO3",
+		.regulators_node = "regulators",
+		.of_match = "ldo3",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN1,
+		.enable_mask = BIT(2),
+		.volt_table = pm886_ldo_volt_table1,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table1),
+		.vsel_reg = PM886_REG_LDO3_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO4",
+		.regulators_node = "regulators",
+		.of_match = "ldo4",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN1,
+		.enable_mask = BIT(3),
+		.volt_table = pm886_ldo_volt_table2,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+		.vsel_reg = PM886_REG_LDO4_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO5",
+		.regulators_node = "regulators",
+		.of_match = "ldo5",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN1,
+		.enable_mask = BIT(4),
+		.volt_table = pm886_ldo_volt_table2,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+		.vsel_reg = PM886_REG_LDO5_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO6",
+		.regulators_node = "regulators",
+		.of_match = "ldo6",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN1,
+		.enable_mask = BIT(5),
+		.volt_table = pm886_ldo_volt_table2,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+		.vsel_reg = PM886_REG_LDO6_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO7",
+		.regulators_node = "regulators",
+		.of_match = "ldo7",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN1,
+		.enable_mask = BIT(6),
+		.volt_table = pm886_ldo_volt_table2,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+		.vsel_reg = PM886_REG_LDO7_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO8",
+		.regulators_node = "regulators",
+		.of_match = "ldo8",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN1,
+		.enable_mask = BIT(7),
+		.volt_table = pm886_ldo_volt_table2,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+		.vsel_reg = PM886_REG_LDO8_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO9",
+		.regulators_node = "regulators",
+		.of_match = "ldo9",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN2,
+		.enable_mask = BIT(0),
+		.volt_table = pm886_ldo_volt_table2,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+		.vsel_reg = PM886_REG_LDO9_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO10",
+		.regulators_node = "regulators",
+		.of_match = "ldo10",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN2,
+		.enable_mask = BIT(1),
+		.volt_table = pm886_ldo_volt_table2,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+		.vsel_reg = PM886_REG_LDO10_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO11",
+		.regulators_node = "regulators",
+		.of_match = "ldo11",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN2,
+		.enable_mask = BIT(2),
+		.volt_table = pm886_ldo_volt_table2,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+		.vsel_reg = PM886_REG_LDO11_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO12",
+		.regulators_node = "regulators",
+		.of_match = "ldo12",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN2,
+		.enable_mask = BIT(3),
+		.volt_table = pm886_ldo_volt_table2,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+		.vsel_reg = PM886_REG_LDO12_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO13",
+		.regulators_node = "regulators",
+		.of_match = "ldo13",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN2,
+		.enable_mask = BIT(4),
+		.volt_table = pm886_ldo_volt_table2,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+		.vsel_reg = PM886_REG_LDO13_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO14",
+		.regulators_node = "regulators",
+		.of_match = "ldo14",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN2,
+		.enable_mask = BIT(5),
+		.volt_table = pm886_ldo_volt_table2,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+		.vsel_reg = PM886_REG_LDO14_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO15",
+		.regulators_node = "regulators",
+		.of_match = "ldo15",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN2,
+		.enable_mask = BIT(6),
+		.volt_table = pm886_ldo_volt_table2,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table2),
+		.vsel_reg = PM886_REG_LDO15_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "LDO16",
+		.regulators_node = "regulators",
+		.of_match = "ldo16",
+		.ops = &pm886_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.enable_reg = PM886_REG_LDO_EN2,
+		.enable_mask = BIT(7),
+		.volt_table = pm886_ldo_volt_table3,
+		.n_voltages = ARRAY_SIZE(pm886_ldo_volt_table3),
+		.vsel_reg = PM886_REG_LDO16_VOUT,
+		.vsel_mask = PM886_LDO_VSEL_MASK,
+	},
+	{
+		.name = "buck1",
+		.regulators_node = "regulators",
+		.of_match = "buck1",
+		.ops = &pm886_buck_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 85,
+		.linear_ranges = pm886_buck_volt_ranges1,
+		.n_linear_ranges = ARRAY_SIZE(pm886_buck_volt_ranges1),
+		.vsel_reg = PM886_REG_BUCK1_VOUT,
+		.vsel_mask = PM886_BUCK_VSEL_MASK,
+		.enable_reg = PM886_REG_BUCK_EN,
+		.enable_mask = BIT(0),
+	},
+	{
+		.name = "buck2",
+		.regulators_node = "regulators",
+		.of_match = "buck2",
+		.ops = &pm886_buck_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 115,
+		.linear_ranges = pm886_buck_volt_ranges2,
+		.n_linear_ranges = ARRAY_SIZE(pm886_buck_volt_ranges2),
+		.vsel_reg = PM886_REG_BUCK2_VOUT,
+		.vsel_mask = PM886_BUCK_VSEL_MASK,
+		.enable_reg = PM886_REG_BUCK_EN,
+		.enable_mask = BIT(1),
+	},
+	{
+		.name = "buck3",
+		.regulators_node = "regulators",
+		.of_match = "buck3",
+		.ops = &pm886_buck_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 115,
+		.linear_ranges = pm886_buck_volt_ranges2,
+		.n_linear_ranges = ARRAY_SIZE(pm886_buck_volt_ranges2),
+		.vsel_reg = PM886_REG_BUCK3_VOUT,
+		.vsel_mask = PM886_BUCK_VSEL_MASK,
+		.enable_reg = PM886_REG_BUCK_EN,
+		.enable_mask = BIT(2),
+	},
+	{
+		.name = "buck4",
+		.regulators_node = "regulators",
+		.of_match = "buck4",
+		.ops = &pm886_buck_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 115,
+		.linear_ranges = pm886_buck_volt_ranges2,
+		.n_linear_ranges = ARRAY_SIZE(pm886_buck_volt_ranges2),
+		.vsel_reg = PM886_REG_BUCK4_VOUT,
+		.vsel_mask = PM886_BUCK_VSEL_MASK,
+		.enable_reg = PM886_REG_BUCK_EN,
+		.enable_mask = BIT(3),
+	},
+	{
+		.name = "buck5",
+		.regulators_node = "regulators",
+		.of_match = "buck5",
+		.ops = &pm886_buck_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 115,
+		.linear_ranges = pm886_buck_volt_ranges2,
+		.n_linear_ranges = ARRAY_SIZE(pm886_buck_volt_ranges2),
+		.vsel_reg = PM886_REG_BUCK5_VOUT,
+		.vsel_mask = PM886_BUCK_VSEL_MASK,
+		.enable_reg = PM886_REG_BUCK_EN,
+		.enable_mask = BIT(4),
+	},
+};
+
+static int pm886_regulator_probe(struct platform_device *pdev)
+{
+	struct pm886_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config rcfg = { };
+	struct device *dev = &pdev->dev;
+	struct regulator_desc *rdesc;
+	struct regulator_dev *rdev;
+	struct i2c_client *page;
+	struct regmap *regmap;
+
+	page = devm_i2c_new_dummy_device(dev, chip->client->adapter,
+			chip->client->addr + PM886_PAGE_OFFSET_REGULATORS);
+	if (IS_ERR(page))
+		return dev_err_probe(dev, PTR_ERR(page),
+				"Failed to initialize regulators client\n");
+
+	regmap = devm_regmap_init_i2c(page, &pm886_regulator_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				"Failed to initialize regulators regmap\n");
+	rcfg.regmap = regmap;
+
+	rcfg.dev = dev->parent;
+
+	for (int i = 0; i < ARRAY_SIZE(pm886_regulators); i++) {
+		rdesc = &pm886_regulators[i];
+		rdev = devm_regulator_register(dev, rdesc, &rcfg);
+		if (IS_ERR(rdev))
+			return dev_err_probe(dev, PTR_ERR(rdev),
+					"Failed to register %s\n", rdesc->name);
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id pm886_regulator_id_table[] = {
+	{ "88pm886-regulator", },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, pm886_regulator_id_table);
+
+static struct platform_driver pm886_regulator_driver = {
+	.driver = {
+		.name = "88pm886-regulator",
+	},
+	.probe = pm886_regulator_probe,
+	.id_table = pm886_regulator_id_table,
+};
+module_platform_driver(pm886_regulator_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM886 PMIC regulator driver");
+MODULE_AUTHOR("Karel Balej <balejk@matfyz.cz>");
+MODULE_LICENSE("GPL");

drivers/regulator/Kconfig

@@ -91,6 +91,12 @@ config REGULATOR_88PM8607
 	help
 	  This driver supports 88PM8607 voltage regulator chips.
 
+config REGULATOR_88PM886
+	tristate "Marvell 88PM886 voltage regulators"
+	depends on MFD_88PM886_PMIC
+	help
+	  This driver implements support for Marvell 88PM886 voltage regulators.
+
 config REGULATOR_ACT8865
 	tristate "Active-semi act8865 voltage regulator"
 	depends on I2C

drivers/regulator/Makefile

@@ -14,6 +14,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 obj-$(CONFIG_REGULATOR_88PG86X) += 88pg86x.o
 obj-$(CONFIG_REGULATOR_88PM800) += 88pm800-regulator.o
 obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
+obj-$(CONFIG_REGULATOR_88PM886) += 88pm886-regulator.o
 obj-$(CONFIG_REGULATOR_CROS_EC) += cros-ec-regulator.o
 obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
 obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o

include/linux/mfd/88pm886.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __MFD_88PM886_H
+#define __MFD_88PM886_H
+
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#define PM886_A1_CHIP_ID		0xa1
+
+#define PM886_IRQ_ONKEY			0
+
+#define PM886_PAGE_OFFSET_REGULATORS	1
+
+#define PM886_REG_ID			0x00
+
+#define PM886_REG_STATUS1		0x01
+#define PM886_ONKEY_STS1		BIT(0)
+
+#define PM886_REG_INT_STATUS1		0x05
+
+#define PM886_REG_INT_ENA_1		0x0a
+#define PM886_INT_ENA1_ONKEY		BIT(0)
+
+#define PM886_REG_MISC_CONFIG1		0x14
+#define PM886_SW_PDOWN			BIT(5)
+
+#define PM886_REG_MISC_CONFIG2		0x15
+#define PM886_INT_INV			BIT(0)
+#define PM886_INT_CLEAR			BIT(1)
+#define PM886_INT_RC			0x00
+#define PM886_INT_WC			BIT(1)
+#define PM886_INT_MASK_MODE		BIT(2)
+
+#define PM886_REG_RTC_SPARE6		0xef
+
+#define PM886_REG_BUCK_EN		0x08
+#define PM886_REG_LDO_EN1		0x09
+#define PM886_REG_LDO_EN2		0x0a
+#define PM886_REG_LDO1_VOUT		0x20
+#define PM886_REG_LDO2_VOUT		0x26
+#define PM886_REG_LDO3_VOUT		0x2c
+#define PM886_REG_LDO4_VOUT		0x32
+#define PM886_REG_LDO5_VOUT		0x38
+#define PM886_REG_LDO6_VOUT		0x3e
+#define PM886_REG_LDO7_VOUT		0x44
+#define PM886_REG_LDO8_VOUT		0x4a
+#define PM886_REG_LDO9_VOUT		0x50
+#define PM886_REG_LDO10_VOUT		0x56
+#define PM886_REG_LDO11_VOUT		0x5c
+#define PM886_REG_LDO12_VOUT		0x62
+#define PM886_REG_LDO13_VOUT		0x68
+#define PM886_REG_LDO14_VOUT		0x6e
+#define PM886_REG_LDO15_VOUT		0x74
+#define PM886_REG_LDO16_VOUT		0x7a
+#define PM886_REG_BUCK1_VOUT		0xa5
+#define PM886_REG_BUCK2_VOUT		0xb3
+#define PM886_REG_BUCK3_VOUT		0xc1
+#define PM886_REG_BUCK4_VOUT		0xcf
+#define PM886_REG_BUCK5_VOUT		0xdd
+
+#define PM886_LDO_VSEL_MASK		0x0f
+#define PM886_BUCK_VSEL_MASK		0x7f
+
+struct pm886_chip {
+	struct i2c_client *client;
+	unsigned int chip_id;
+	struct regmap *regmap;
+};
+#endif /* __MFD_88PM886_H */