Merge tag 'drm-misc-next-2021-09-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.15:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

Driver Changes:
  - Conversions to dev_err_probe() helper
  - rockchip: Various build improvements, Use
    DRM_BRIDGE_ATTACH_NO_CONNECTOR for LVDS and RGB
  - panel: New panel-edp driver
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923074522.zaja7mzxeimxf6g3@gilmour

Documentation/devicetree/bindings/display/panel/panel-edp.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-edp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Probeable (via DP AUX / EDID) eDP Panels with simple poweron sequences
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description: |
+  This binding file can be used to indicate that an eDP panel is connected
+  to a Embedded DisplayPort AUX bus (see display/dp-aux-bus.yaml) without
+  actually specifying exactly what panel is connected. This is useful for
+  the case that more than one different panel could be connected to the
+  board, either for second-sourcing purposes or to support multiple SKUs
+  with different LCDs that hook up to a common board.
+
+  As per above, a requirement for using this binding is that the panel is
+  represented under the DP AUX bus. This means that we can use any
+  information provided by the DP AUX bus (including the EDID) to identify
+  the panel. We can use this to identify display size, resolution, and
+  timings among other things.
+
+  One piece of information about eDP panels that is typically _not_
+  provided anywhere on the DP AUX bus is the power sequencing timings.
+  This is the reason why, historically, we've always had to explicitly
+  list eDP panels. We solve that here with two tricks. The "worst case"
+  power on timings for any panels expected to be connected to a board are
+  specified in these bindings. Once we've powered on, it's expected that
+  the operating system will lookup the panel in a table (based on EDID
+  information) to figure out other power sequencing timings.
+
+  eDP panels in general can have somewhat arbitrary power sequencing
+  requirements. However, even though it's arbitrary in general, the
+  vast majority of panel datasheets have a power sequence diagram that
+  looks the exactly the same as every other panel. Each panel datasheet
+  cares about different timings in this diagram but the fact that the
+  diagram is so similar means we can come up with a single driver to
+  handle it.
+
+  These diagrams all look roughly like this, sometimes labeled with
+  slightly different numbers / lines but all pretty much the same
+  sequence. This is because much of this diagram comes straight from
+  the eDP Standard.
+
+                __________________________________________________
+  Vdd       ___/:                                                :\____       /
+          _/    :                                                :     \_____/
+           :<T1>:<T2>:                                 :<--T10-->:<T11>:<T12>:
+                :    +-----------------------+---------+---------+
+  eDP     -----------+ Black video           | Src vid | Blk vid +
+  Display       :    +-----------------------+---------+---------+
+                :     _______________________:_________:_________:
+  HPD           :<T3>|                       :         :         |
+          ___________|                       :         :         |_____________
+                     :                       :         :         :
+  Sink               +-----------------------:---------:---------+
+  AUX CH  -----------+ AUX Ch operational    :         :         +-------------
+                     +-----------------------:---------:---------+
+                     :                       :         :         :
+                     :<T4>:             :<T7>:         :         :
+  Src main                +------+------+--------------+---------+
+  lnk data----------------+LnkTrn| Idle |Valid vid data| Idle/off+-------------
+                          +------+------+--------------+---------+
+                          : <T5> :<-T6->:<-T8->:       :
+                                               :__:<T9>:
+  LED_EN                                       |  |
+          _____________________________________|  |____________________________
+                                               :  :
+                                     __________:__:_
+  PWM                               |          :  : |
+          __________________________|          :  : |__________________________
+                                    :          :  : :
+                       _____________:__________:__:_:______
+  Bklight         ____/:            :          :  : :     :\____
+  power   _______/     :<---T13---->:          :  : :<T16>:     \______________
+  (Vbl)          :<T17>:<---------T14--------->:  :<-T15->:<T18>:
+
+  The above looks fairly complex but, as per above, each panel only cares
+  about a subset of those timings.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: edp-panel
+
+  hpd-reliable-delay-ms:
+    description:
+      A fixed amount of time that must be waited after powering on the
+      panel's power-supply before the HPD signal is a reliable way to know
+      when the AUX channel is ready. This is useful for panels that glitch
+      the HPD at the start of power-on. This value is not needed if HPD is
+      always reliable for all panels that might be connected.
+
+  hpd-absent-delay-ms:
+    description:
+      The panel specifies that HPD will be asserted this many milliseconds
+      from power on (timing T3 in the diagram above). If we have no way to
+      measure HPD then a fixed delay of this many milliseconds can be used.
+      This can also be used as a timeout when waiting for HPD. Does not
+      include the hpd-reliable-delay, so if hpd-reliable-delay was 80 ms
+      and hpd-absent-delay was 200 ms then we'd do a fixed 80 ms delay and
+      then we know HPD would assert in the next 120 ms. This value is not
+      needed if HPD hooked up, either through a GPIO in the panel node or
+      hooked up directly to the eDP controller.
+
+  backlight: true
+  enable-gpios: true
+  port: true
+  power-supply: true
+  no-hpd: true
+  hpd-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+        vpll-supply = <&src_pp1800_s4a>;
+        vccio-supply = <&src_pp1800_s4a>;
+        vcca-supply = <&src_pp1200_l2a>;
+        vcc-supply = <&src_pp1200_l2a>;
+
+        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+        clock-names = "refclk";
+
+        no-hpd;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            sn65dsi86_out: endpoint {
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+
+        aux-bus {
+          panel {
+            compatible = "edp-panel";
+            power-supply = <&pp3300_dx_edp>;
+            backlight = <&backlight>;
+            hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+            hpd-reliable-delay-ms = <15>;
+
+            port {
+              panel_in_edp: endpoint {
+                remote-endpoint = <&sn65dsi86_out>;
+              };
+            };
+          };
+        };
+      };
+    };

MAINTAINERS

@@ -6022,7 +6022,7 @@ DRM DRIVER FOR SAMSUNG S6D27A1 PANELS
 M:	Markuss Broks <markuss.broks@gmail.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
-F:	driver/gpu/drm/panel/panel-samsung-s6d27a1.c
+F:	drivers/gpu/drm/panel/panel-samsung-s6d27a1.c
 
 DRM DRIVER FOR SITRONIX ST7703 PANELS
 M:	Guido Günther <agx@sigxcpu.org>
@@ -6431,6 +6431,14 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	drivers/gpu/drm/ttm/
 F:	include/drm/ttm/
 
+DRM GPU SCHEDULER
+M:	Andrey Grodzovsky <andrey.grodzovsky@amd.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	drivers/gpu/drm/scheduler/
+F:	include/drm/gpu_scheduler.h
+
 DSBR100 USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org

arch/arm/configs/at91_dt_defconfig

@@ -144,6 +144,7 @@ CONFIG_VIDEO_MT9V032=m
 CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
 CONFIG_BACKLIGHT_PWM=y

arch/arm/configs/exynos_defconfig

@@ -227,6 +227,7 @@ CONFIG_DRM_EXYNOS_DPI=y
 CONFIG_DRM_EXYNOS_DSI=y
 CONFIG_DRM_EXYNOS_HDMI=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
 CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y

arch/arm/configs/imx_v6_v7_defconfig

@@ -281,6 +281,7 @@ CONFIG_DRM=y
 CONFIG_DRM_MSM=y
 CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
 CONFIG_DRM_TI_TFP410=y
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m

arch/arm/configs/lpc32xx_defconfig

@@ -108,6 +108,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PL111=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y

arch/arm/configs/multi_v5_defconfig

@@ -194,6 +194,7 @@ CONFIG_VIDEO_ATMEL_ISI=m
 CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_ASPEED_GFX=m
 CONFIG_FB_IMX=y
 CONFIG_FB_ATMEL=y

arch/arm/configs/multi_v7_defconfig

@@ -704,6 +704,7 @@ CONFIG_DRM_TEGRA=y
 CONFIG_DRM_STM=m
 CONFIG_DRM_STM_DSI=m
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
 CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
 CONFIG_DRM_PANEL_RAYDIUM_RM68200=m

arch/arm/configs/omap2plus_defconfig

@@ -511,6 +511,7 @@ CONFIG_OMAP2_DSS_DSI=y
 CONFIG_DRM_TILCDC=m
 CONFIG_DRM_PANEL_DSI_CM=m
 CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_PANEL_EDP=m
 CONFIG_DRM_PANEL_LG_LB035Q02=m
 CONFIG_DRM_PANEL_NEC_NL8048HL11=m
 CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m

arch/arm/configs/qcom_defconfig

@@ -158,6 +158,7 @@ CONFIG_MEDIA_SUPPORT=y
 CONFIG_DRM=y
 CONFIG_DRM_MSM=m
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_ANALOGIX_ANX78XX=m
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y

arch/arm/configs/realview_defconfig

@@ -61,6 +61,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_PL111=y

arch/arm/configs/sama5_defconfig

@@ -160,6 +160,7 @@ CONFIG_VIDEO_MT9V032=m
 CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y

arch/arm/configs/shmobile_defconfig

@@ -129,6 +129,7 @@ CONFIG_VIDEO_ML86V7667=y
 CONFIG_DRM=y
 CONFIG_DRM_RCAR_DU=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_LVDS_CODEC=y
 CONFIG_DRM_SII902X=y

arch/arm/configs/sunxi_defconfig

@@ -108,6 +108,7 @@ CONFIG_DRM_SUN4I_HDMI_CEC=y
 CONFIG_DRM_SUN8I_DW_HDMI=y
 CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_LIMA=y
 CONFIG_FB_SIMPLE=y

arch/arm/configs/tegra_defconfig

@@ -199,6 +199,7 @@ CONFIG_DRM_TEGRA=y
 CONFIG_DRM_TEGRA_STAGING=y
 CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_LVDS_CODEC=y
 CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y

arch/arm/configs/versatile_defconfig

@@ -57,6 +57,7 @@ CONFIG_GPIO_PL061=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_ARM_VERSATILE=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_PL111=y

arch/arm/configs/vexpress_defconfig

@@ -77,6 +77,7 @@ CONFIG_SENSORS_VEXPRESS=y
 CONFIG_REGULATOR_VEXPRESS=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_SII902X=y
 CONFIG_DRM_PL111=y
 CONFIG_FB=y

arch/arm64/configs/defconfig

@@ -697,6 +697,7 @@ CONFIG_DRM_MSM=m
 CONFIG_DRM_TEGRA=m
 CONFIG_DRM_PANEL_LVDS=m
 CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_PANEL_EDP=m
 CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
 CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m
 CONFIG_DRM_PANEL_RAYDIUM_RM67191=m

drivers/gpu/drm/bridge/ite-it66121.c

@@ -918,11 +918,23 @@ static int it66121_probe(struct i2c_client *client,
 		return -EINVAL;
 
 	ep = of_graph_get_remote_node(dev->of_node, 1, -1);
-	if (!ep)
-		return -EPROBE_DEFER;
+	if (!ep) {
+		dev_err(ctx->dev, "The endpoint is unconnected\n");
+		return -EINVAL;
+	}
+
+	if (!of_device_is_available(ep)) {
+		of_node_put(ep);
+		dev_err(ctx->dev, "The remote device is disabled\n");
+		return -ENODEV;
+	}
 
 	ctx->next_bridge = of_drm_find_bridge(ep);
 	of_node_put(ep);
+	if (!ctx->next_bridge) {
+		dev_dbg(ctx->dev, "Next bridge not found, deferring probe\n");
+		return -EPROBE_DEFER;
+	}
 
 	if (!ctx->next_bridge)
 		return -EPROBE_DEFER;

drivers/gpu/drm/bridge/panel.c

@@ -9,6 +9,7 @@
 #include <drm/drm_connector.h>
 #include <drm/drm_encoder.h>
 #include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
@@ -332,3 +333,39 @@ struct drm_connector *drm_panel_bridge_connector(struct drm_bridge *bridge)
 	return &panel_bridge->connector;
 }
 EXPORT_SYMBOL(drm_panel_bridge_connector);
+
+#ifdef CONFIG_OF
+/**
+ * devm_drm_of_get_bridge - Return next bridge in the chain
+ * @dev: device to tie the bridge lifetime to
+ * @np: device tree node containing encoder output ports
+ * @port: port in the device tree node
+ * @endpoint: endpoint in the device tree node
+ *
+ * Given a DT node's port and endpoint number, finds the connected node
+ * and returns the associated bridge if any, or creates and returns a
+ * drm panel bridge instance if a panel is connected.
+ *
+ * Returns a pointer to the bridge if successful, or an error pointer
+ * otherwise.
+ */
+struct drm_bridge *devm_drm_of_get_bridge(struct device *dev,
+					  struct device_node *np,
+					  u32 port, u32 endpoint)
+{
+	struct drm_bridge *bridge;
+	struct drm_panel *panel;
+	int ret;
+
+	ret = drm_of_find_panel_or_bridge(np, port, endpoint,
+					  &panel, &bridge);
+	if (ret)
+		return ERR_PTR(ret);
+
+	if (panel)
+		bridge = devm_drm_panel_bridge_add(dev, panel);
+
+	return bridge;
+}
+EXPORT_SYMBOL(devm_drm_of_get_bridge);
+#endif

drivers/gpu/drm/drm_bridge.c

@@ -1232,40 +1232,6 @@ struct drm_bridge *of_drm_find_bridge(struct device_node *np)
 	return NULL;
 }
 EXPORT_SYMBOL(of_drm_find_bridge);
-
-/**
- * devm_drm_of_get_bridge - Return next bridge in the chain
- * @dev: device to tie the bridge lifetime to
- * @np: device tree node containing encoder output ports
- * @port: port in the device tree node
- * @endpoint: endpoint in the device tree node
- *
- * Given a DT node's port and endpoint number, finds the connected node
- * and returns the associated bridge if any, or creates and returns a
- * drm panel bridge instance if a panel is connected.
- *
- * Returns a pointer to the bridge if successful, or an error pointer
- * otherwise.
- */
-struct drm_bridge *devm_drm_of_get_bridge(struct device *dev,
-					  struct device_node *np,
-					  u32 port, u32 endpoint)
-{
-	struct drm_bridge *bridge;
-	struct drm_panel *panel;
-	int ret;
-
-	ret = drm_of_find_panel_or_bridge(np, port, endpoint,
-					  &panel, &bridge);
-	if (ret)
-		return ERR_PTR(ret);
-
-	if (panel)
-		bridge = devm_drm_panel_bridge_add(dev, panel);
-
-	return bridge;
-}
-EXPORT_SYMBOL(devm_drm_of_get_bridge);
 #endif
 
 MODULE_AUTHOR("Ajay Kumar <ajaykumar.rs@samsung.com>");

drivers/gpu/drm/drm_connector.c

@@ -1620,7 +1620,7 @@ EXPORT_SYMBOL(drm_mode_create_tv_properties);
  * connectors.
  *
  * Atomic drivers should use drm_connector_attach_scaling_mode_property()
- * instead to correctly assign &drm_connector_state.picture_aspect_ratio
+ * instead to correctly assign &drm_connector_state.scaling_mode
  * in the atomic state.
  */
 int drm_mode_create_scaling_mode_property(struct drm_device *dev)
@@ -1740,7 +1740,7 @@ EXPORT_SYMBOL(drm_connector_attach_vrr_capable_property);
  * @scaling_mode_mask: or'ed mask of BIT(%DRM_MODE_SCALE_\*).
  *
  * This is used to add support for scaling mode to atomic drivers.
- * The scaling mode will be set to &drm_connector_state.picture_aspect_ratio
+ * The scaling mode will be set to &drm_connector_state.scaling_mode
  * and can be used from &drm_connector_helper_funcs->atomic_check for validation.
  *
  * This is the atomic version of drm_mode_create_scaling_mode_property().

drivers/gpu/drm/drm_edid.c

@@ -100,122 +100,127 @@ struct detailed_mode_closure {
 #define LEVEL_GTF2	2
 #define LEVEL_CVT	3
 
+#define EDID_QUIRK(vend, product_id, _quirks) \
+{ \
+	.panel_id = drm_edid_encode_panel_id(vend, product_id), \
+	.quirks = _quirks \
+}
+
 static const struct edid_quirk {
-	char vendor[4];
-	int product_id;
+	u32 panel_id;
 	u32 quirks;
 } edid_quirk_list[] = {
 	/* Acer AL1706 */
-	{ "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 },
+	EDID_QUIRK("ACR", 44358, EDID_QUIRK_PREFER_LARGE_60),
 	/* Acer F51 */
-	{ "API", 0x7602, EDID_QUIRK_PREFER_LARGE_60 },
+	EDID_QUIRK("API", 0x7602, EDID_QUIRK_PREFER_LARGE_60),
 
 	/* AEO model 0 reports 8 bpc, but is a 6 bpc panel */
-	{ "AEO", 0, EDID_QUIRK_FORCE_6BPC },
+	EDID_QUIRK("AEO", 0, EDID_QUIRK_FORCE_6BPC),
 
 	/* BOE model on HP Pavilion 15-n233sl reports 8 bpc, but is a 6 bpc panel */
-	{ "BOE", 0x78b, EDID_QUIRK_FORCE_6BPC },
+	EDID_QUIRK("BOE", 0x78b, EDID_QUIRK_FORCE_6BPC),
 
 	/* CPT panel of Asus UX303LA reports 8 bpc, but is a 6 bpc panel */
-	{ "CPT", 0x17df, EDID_QUIRK_FORCE_6BPC },
+	EDID_QUIRK("CPT", 0x17df, EDID_QUIRK_FORCE_6BPC),
 
 	/* SDC panel of Lenovo B50-80 reports 8 bpc, but is a 6 bpc panel */
-	{ "SDC", 0x3652, EDID_QUIRK_FORCE_6BPC },
+	EDID_QUIRK("SDC", 0x3652, EDID_QUIRK_FORCE_6BPC),
 
 	/* BOE model 0x0771 reports 8 bpc, but is a 6 bpc panel */
-	{ "BOE", 0x0771, EDID_QUIRK_FORCE_6BPC },
+	EDID_QUIRK("BOE", 0x0771, EDID_QUIRK_FORCE_6BPC),
 
 	/* Belinea 10 15 55 */
-	{ "MAX", 1516, EDID_QUIRK_PREFER_LARGE_60 },
-	{ "MAX", 0x77e, EDID_QUIRK_PREFER_LARGE_60 },
+	EDID_QUIRK("MAX", 1516, EDID_QUIRK_PREFER_LARGE_60),
+	EDID_QUIRK("MAX", 0x77e, EDID_QUIRK_PREFER_LARGE_60),
 
 	/* Envision Peripherals, Inc. EN-7100e */
-	{ "EPI", 59264, EDID_QUIRK_135_CLOCK_TOO_HIGH },
+	EDID_QUIRK("EPI", 59264, EDID_QUIRK_135_CLOCK_TOO_HIGH),
 	/* Envision EN2028 */
-	{ "EPI", 8232, EDID_QUIRK_PREFER_LARGE_60 },
+	EDID_QUIRK("EPI", 8232, EDID_QUIRK_PREFER_LARGE_60),
 
 	/* Funai Electronics PM36B */
-	{ "FCM", 13600, EDID_QUIRK_PREFER_LARGE_75 |
-	  EDID_QUIRK_DETAILED_IN_CM },
+	EDID_QUIRK("FCM", 13600, EDID_QUIRK_PREFER_LARGE_75 |
+				       EDID_QUIRK_DETAILED_IN_CM),
 
 	/* LGD panel of HP zBook 17 G2, eDP 10 bpc, but reports unknown bpc */
-	{ "LGD", 764, EDID_QUIRK_FORCE_10BPC },
+	EDID_QUIRK("LGD", 764, EDID_QUIRK_FORCE_10BPC),
 
 	/* LG Philips LCD LP154W01-A5 */
-	{ "LPL", 0, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE },
-	{ "LPL", 0x2a00, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE },
+	EDID_QUIRK("LPL", 0, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE),
+	EDID_QUIRK("LPL", 0x2a00, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE),
 
 	/* Samsung SyncMaster 205BW.  Note: irony */
-	{ "SAM", 541, EDID_QUIRK_DETAILED_SYNC_PP },
+	EDID_QUIRK("SAM", 541, EDID_QUIRK_DETAILED_SYNC_PP),
 	/* Samsung SyncMaster 22[5-6]BW */
-	{ "SAM", 596, EDID_QUIRK_PREFER_LARGE_60 },
-	{ "SAM", 638, EDID_QUIRK_PREFER_LARGE_60 },
+	EDID_QUIRK("SAM", 596, EDID_QUIRK_PREFER_LARGE_60),
+	EDID_QUIRK("SAM", 638, EDID_QUIRK_PREFER_LARGE_60),
 
 	/* Sony PVM-2541A does up to 12 bpc, but only reports max 8 bpc */
-	{ "SNY", 0x2541, EDID_QUIRK_FORCE_12BPC },
+	EDID_QUIRK("SNY", 0x2541, EDID_QUIRK_FORCE_12BPC),
 
 	/* ViewSonic VA2026w */
-	{ "VSC", 5020, EDID_QUIRK_FORCE_REDUCED_BLANKING },
+	EDID_QUIRK("VSC", 5020, EDID_QUIRK_FORCE_REDUCED_BLANKING),
 
 	/* Medion MD 30217 PG */
-	{ "MED", 0x7b8, EDID_QUIRK_PREFER_LARGE_75 },
+	EDID_QUIRK("MED", 0x7b8, EDID_QUIRK_PREFER_LARGE_75),
 
 	/* Lenovo G50 */
-	{ "SDC", 18514, EDID_QUIRK_FORCE_6BPC },
+	EDID_QUIRK("SDC", 18514, EDID_QUIRK_FORCE_6BPC),
 
 	/* Panel in Samsung NP700G7A-S01PL notebook reports 6bpc */
-	{ "SEC", 0xd033, EDID_QUIRK_FORCE_8BPC },
+	EDID_QUIRK("SEC", 0xd033, EDID_QUIRK_FORCE_8BPC),
 
 	/* Rotel RSX-1058 forwards sink's EDID but only does HDMI 1.1*/
-	{ "ETR", 13896, EDID_QUIRK_FORCE_8BPC },
+	EDID_QUIRK("ETR", 13896, EDID_QUIRK_FORCE_8BPC),
 
 	/* Valve Index Headset */
-	{ "VLV", 0x91a8, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91b0, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91b1, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91b2, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91b3, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91b4, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91b5, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91b6, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91b7, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91b8, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91b9, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91ba, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91bb, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91bc, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91bd, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91be, EDID_QUIRK_NON_DESKTOP },
-	{ "VLV", 0x91bf, EDID_QUIRK_NON_DESKTOP },
+	EDID_QUIRK("VLV", 0x91a8, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91b0, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91b1, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91b2, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91b3, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91b4, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91b5, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91b6, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91b7, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91b8, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91b9, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91ba, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91bb, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91bc, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91bd, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91be, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("VLV", 0x91bf, EDID_QUIRK_NON_DESKTOP),
 
 	/* HTC Vive and Vive Pro VR Headsets */
-	{ "HVR", 0xaa01, EDID_QUIRK_NON_DESKTOP },
-	{ "HVR", 0xaa02, EDID_QUIRK_NON_DESKTOP },
+	EDID_QUIRK("HVR", 0xaa01, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("HVR", 0xaa02, EDID_QUIRK_NON_DESKTOP),
 
 	/* Oculus Rift DK1, DK2, CV1 and Rift S VR Headsets */
-	{ "OVR", 0x0001, EDID_QUIRK_NON_DESKTOP },
-	{ "OVR", 0x0003, EDID_QUIRK_NON_DESKTOP },
-	{ "OVR", 0x0004, EDID_QUIRK_NON_DESKTOP },
-	{ "OVR", 0x0012, EDID_QUIRK_NON_DESKTOP },
+	EDID_QUIRK("OVR", 0x0001, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("OVR", 0x0003, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("OVR", 0x0004, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("OVR", 0x0012, EDID_QUIRK_NON_DESKTOP),
 
 	/* Windows Mixed Reality Headsets */
-	{ "ACR", 0x7fce, EDID_QUIRK_NON_DESKTOP },
-	{ "HPN", 0x3515, EDID_QUIRK_NON_DESKTOP },
-	{ "LEN", 0x0408, EDID_QUIRK_NON_DESKTOP },
-	{ "LEN", 0xb800, EDID_QUIRK_NON_DESKTOP },
-	{ "FUJ", 0x1970, EDID_QUIRK_NON_DESKTOP },
-	{ "DEL", 0x7fce, EDID_QUIRK_NON_DESKTOP },
-	{ "SEC", 0x144a, EDID_QUIRK_NON_DESKTOP },
-	{ "AUS", 0xc102, EDID_QUIRK_NON_DESKTOP },
+	EDID_QUIRK("ACR", 0x7fce, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("HPN", 0x3515, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("LEN", 0x0408, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("LEN", 0xb800, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("FUJ", 0x1970, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("DEL", 0x7fce, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("SEC", 0x144a, EDID_QUIRK_NON_DESKTOP),
+	EDID_QUIRK("AUS", 0xc102, EDID_QUIRK_NON_DESKTOP),
 
 	/* Sony PlayStation VR Headset */
-	{ "SNY", 0x0704, EDID_QUIRK_NON_DESKTOP },
+	EDID_QUIRK("SNY", 0x0704, EDID_QUIRK_NON_DESKTOP),
 
 	/* Sensics VR Headsets */
-	{ "SEN", 0x1019, EDID_QUIRK_NON_DESKTOP },
+	EDID_QUIRK("SEN", 0x1019, EDID_QUIRK_NON_DESKTOP),
 
 	/* OSVR HDK and HDK2 VR Headsets */
-	{ "SVR", 0x1019, EDID_QUIRK_NON_DESKTOP },
+	EDID_QUIRK("SVR", 0x1019, EDID_QUIRK_NON_DESKTOP),
 };
 
 /*
@@ -1905,6 +1910,44 @@ int drm_add_override_edid_modes(struct drm_connector *connector)
 }
 EXPORT_SYMBOL(drm_add_override_edid_modes);
 
+static struct edid *drm_do_get_edid_base_block(
+	int (*get_edid_block)(void *data, u8 *buf, unsigned int block,
+			      size_t len),
+	void *data, bool *edid_corrupt, int *null_edid_counter)
+{
+	int i;
+	void *edid;
+
+	edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+	if (edid == NULL)
+		return NULL;
+
+	/* base block fetch */
+	for (i = 0; i < 4; i++) {
+		if (get_edid_block(data, edid, 0, EDID_LENGTH))
+			goto out;
+		if (drm_edid_block_valid(edid, 0, false, edid_corrupt))
+			break;
+		if (i == 0 && drm_edid_is_zero(edid, EDID_LENGTH)) {
+			if (null_edid_counter)
+				(*null_edid_counter)++;
+			goto carp;
+		}
+	}
+	if (i == 4)
+		goto carp;
+
+	return edid;
+
+carp:
+	kfree(edid);
+	return ERR_PTR(-EINVAL);
+
+out:
+	kfree(edid);
+	return NULL;
+}
+
 /**
  * drm_do_get_edid - get EDID data using a custom EDID block read function
  * @connector: connector we're probing
@@ -1938,25 +1981,16 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,
 	if (override)
 		return override;
 
-	if ((edid = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
+	edid = (u8 *)drm_do_get_edid_base_block(get_edid_block, data,
+						&connector->edid_corrupt,
+						&connector->null_edid_counter);
+	if (IS_ERR_OR_NULL(edid)) {
+		if (IS_ERR(edid))
+			connector_bad_edid(connector, edid, 1);
 		return NULL;
-
-	/* base block fetch */
-	for (i = 0; i < 4; i++) {
-		if (get_edid_block(data, edid, 0, EDID_LENGTH))
-			goto out;
-		if (drm_edid_block_valid(edid, 0, false,
-					 &connector->edid_corrupt))
-			break;
-		if (i == 0 && drm_edid_is_zero(edid, EDID_LENGTH)) {
-			connector->null_edid_counter++;
-			goto carp;
-		}
 	}
-	if (i == 4)
-		goto carp;
 
-	/* if there's no extensions, we're done */
+	/* if there's no extensions or no connector, we're done */
 	valid_extensions = edid[0x7e];
 	if (valid_extensions == 0)
 		return (struct edid *)edid;
@@ -2010,8 +2044,6 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,
 
 	return (struct edid *)edid;
 
-carp:
-	connector_bad_edid(connector, edid, 1);
 out:
 	kfree(edid);
 	return NULL;
@@ -2060,6 +2092,72 @@ struct edid *drm_get_edid(struct drm_connector *connector,
 }
 EXPORT_SYMBOL(drm_get_edid);
 
+static u32 edid_extract_panel_id(const struct edid *edid)
+{
+	/*
+	 * We represent the ID as a 32-bit number so it can easily be compared
+	 * with "==".
+	 *
+	 * NOTE that we deal with endianness differently for the top half
+	 * of this ID than for the bottom half. The bottom half (the product
+	 * id) gets decoded as little endian by the EDID_PRODUCT_ID because
+	 * that's how everyone seems to interpret it. The top half (the mfg_id)
+	 * gets stored as big endian because that makes
+	 * drm_edid_encode_panel_id() and drm_edid_decode_panel_id() easier
+	 * to write (it's easier to extract the ASCII). It doesn't really
+	 * matter, though, as long as the number here is unique.
+	 */
+	return (u32)edid->mfg_id[0] << 24   |
+	       (u32)edid->mfg_id[1] << 16   |
+	       (u32)EDID_PRODUCT_ID(edid);
+}
+
+/**
+ * drm_edid_get_panel_id - Get a panel's ID through DDC
+ * @adapter: I2C adapter to use for DDC
+ *
+ * This function reads the first block of the EDID of a panel and (assuming
+ * that the EDID is valid) extracts the ID out of it. The ID is a 32-bit value
+ * (16 bits of manufacturer ID and 16 bits of per-manufacturer ID) that's
+ * supposed to be different for each different modem of panel.
+ *
+ * This function is intended to be used during early probing on devices where
+ * more than one panel might be present. Because of its intended use it must
+ * assume that the EDID of the panel is correct, at least as far as the ID
+ * is concerned (in other words, we don't process any overrides here).
+ *
+ * NOTE: it's expected that this function and drm_do_get_edid() will both
+ * be read the EDID, but there is no caching between them. Since we're only
+ * reading the first block, hopefully this extra overhead won't be too big.
+ *
+ * Return: A 32-bit ID that should be different for each make/model of panel.
+ *         See the functions drm_edid_encode_panel_id() and
+ *         drm_edid_decode_panel_id() for some details on the structure of this
+ *         ID.
+ */
+
+u32 drm_edid_get_panel_id(struct i2c_adapter *adapter)
+{
+	struct edid *edid;
+	u32 panel_id;
+
+	edid = drm_do_get_edid_base_block(drm_do_probe_ddc_edid, adapter,
+					  NULL, NULL);
+
+	/*
+	 * There are no manufacturer IDs of 0, so if there is a problem reading
+	 * the EDID then we'll just return 0.
+	 */
+	if (IS_ERR_OR_NULL(edid))
+		return 0;
+
+	panel_id = edid_extract_panel_id(edid);
+	kfree(edid);
+
+	return panel_id;
+}
+EXPORT_SYMBOL(drm_edid_get_panel_id);
+
 /**
  * drm_get_edid_switcheroo - get EDID data for a vga_switcheroo output
  * @connector: connector we're probing
@@ -2103,25 +2201,6 @@ EXPORT_SYMBOL(drm_edid_duplicate);
 
 /*** EDID parsing ***/
 
-/**
- * edid_vendor - match a string against EDID's obfuscated vendor field
- * @edid: EDID to match
- * @vendor: vendor string
- *
- * Returns true if @vendor is in @edid, false otherwise
- */
-static bool edid_vendor(const struct edid *edid, const char *vendor)
-{
-	char edid_vendor[3];
-
-	edid_vendor[0] = ((edid->mfg_id[0] & 0x7c) >> 2) + '@';
-	edid_vendor[1] = (((edid->mfg_id[0] & 0x3) << 3) |
-			  ((edid->mfg_id[1] & 0xe0) >> 5)) + '@';
-	edid_vendor[2] = (edid->mfg_id[1] & 0x1f) + '@';
-
-	return !strncmp(edid_vendor, vendor, 3);
-}
-
 /**
  * edid_get_quirks - return quirk flags for a given EDID
  * @edid: EDID to process
@@ -2130,14 +2209,13 @@ static bool edid_vendor(const struct edid *edid, const char *vendor)
  */
 static u32 edid_get_quirks(const struct edid *edid)
 {
+	u32 panel_id = edid_extract_panel_id(edid);
 	const struct edid_quirk *quirk;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(edid_quirk_list); i++) {
 		quirk = &edid_quirk_list[i];
-
-		if (edid_vendor(edid, quirk->vendor) &&
-		    (EDID_PRODUCT_ID(edid) == quirk->product_id))
+		if (quirk->panel_id == panel_id)
 			return quirk->quirks;
 	}
 

drivers/gpu/drm/panel/Kconfig

@@ -77,14 +77,26 @@ config DRM_PANEL_LVDS
 	  backlight handling if the panel is attached to a backlight controller.
 
 config DRM_PANEL_SIMPLE
-	tristate "support for simple panels"
+	tristate "support for simple panels (other than eDP ones)"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on PM
+	select VIDEOMODE_HELPERS
+	help
+	  DRM panel driver for dumb non-eDP panels that need at most a regulator
+	  and a GPIO to be powered up. Optionally a backlight can be attached so
+	  that it can be automatically turned off when the panel goes into a
+	  low power state.
+
+config DRM_PANEL_EDP
+	tristate "support for simple Embedded DisplayPort panels"
 	depends on OF
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on PM
 	select VIDEOMODE_HELPERS
 	select DRM_DP_AUX_BUS
 	help
-	  DRM panel driver for dumb panels that need at most a regulator and
+	  DRM panel driver for dumb eDP panels that need at most a regulator and
 	  a GPIO to be powered up. Optionally a backlight can be attached so
 	  that it can be automatically turned off when the panel goes into a
 	  low power state.

drivers/gpu/drm/panel/Makefile

@@ -7,6 +7,7 @@ obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
 obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
+obj-$(CONFIG_DRM_PANEL_EDP) += panel-edp.o
 obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o
 obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o
 obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o

drivers/gpu/drm/panel/panel-edp.c

+/*
+ * Copyright (C) 2013, NVIDIA Corporation.  All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/display_timing.h>
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_dp_aux_bus.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_panel.h>
+
+/**
+ * struct panel_delay - Describes delays for a simple panel.
+ */
+struct panel_delay {
+	/**
+	 * @hpd_reliable: Time for HPD to be reliable
+	 *
+	 * The time (in milliseconds) that it takes after powering the panel
+	 * before the HPD signal is reliable. Ideally this is 0 but some panels,
+	 * board designs, or bad pulldown configs can cause a glitch here.
+	 *
+	 * NOTE: on some old panel data this number appers to be much too big.
+	 * Presumably some old panels simply didn't have HPD hooked up and put
+	 * the hpd_absent here because this field predates the
+	 * hpd_absent. While that works, it's non-ideal.
+	 */
+	unsigned int hpd_reliable;
+
+	/**
+	 * @hpd_absent: Time to wait if HPD isn't hooked up.
+	 *
+	 * Add this to the prepare delay if we know Hot Plug Detect isn't used.
+	 *
+	 * This is T3-max on eDP timing diagrams or the delay from power on
+	 * until HPD is guaranteed to be asserted.
+	 */
+	unsigned int hpd_absent;
+
+	/**
+	 * @prepare_to_enable: Time between prepare and enable.
+	 *
+	 * The minimum time, in milliseconds, that needs to have passed
+	 * between when prepare finished and enable may begin. If at
+	 * enable time less time has passed since prepare finished,
+	 * the driver waits for the remaining time.
+	 *
+	 * If a fixed enable delay is also specified, we'll start
+	 * counting before delaying for the fixed delay.
+	 *
+	 * If a fixed prepare delay is also specified, we won't start
+	 * counting until after the fixed delay. We can't overlap this
+	 * fixed delay with the min time because the fixed delay
+	 * doesn't happen at the end of the function if a HPD GPIO was
+	 * specified.
+	 *
+	 * In other words:
+	 *   prepare()
+	 *     ...
+	 *     // do fixed prepare delay
+	 *     // wait for HPD GPIO if applicable
+	 *     // start counting for prepare_to_enable
+	 *
+	 *   enable()
+	 *     // do fixed enable delay
+	 *     // enforce prepare_to_enable min time
+	 *
+	 * This is not specified in a standard way on eDP timing diagrams.
+	 * It is effectively the time from HPD going high till you can
+	 * turn on the backlight.
+	 */
+	unsigned int prepare_to_enable;
+
+	/**
+	 * @enable: Time for the panel to display a valid frame.
+	 *
+	 * The time (in milliseconds) that it takes for the panel to
+	 * display the first valid frame after starting to receive
+	 * video data.
+	 *
+	 * This is (T6-min + max(T7-max, T8-min)) on eDP timing diagrams or
+	 * the delay after link training finishes until we can turn the
+	 * backlight on and see valid data.
+	 */
+	unsigned int enable;
+
+	/**
+	 * @disable: Time for the panel to turn the display off.
+	 *
+	 * The time (in milliseconds) that it takes for the panel to
+	 * turn the display off (no content is visible).
+	 *
+	 * This is T9-min (delay from backlight off to end of valid video
+	 * data) on eDP timing diagrams. It is not common to set.
+	 */
+	unsigned int disable;
+
+	/**
+	 * @unprepare: Time to power down completely.
+	 *
+	 * The time (in milliseconds) that it takes for the panel
+	 * to power itself down completely.
+	 *
+	 * This time is used to prevent a future "prepare" from
+	 * starting until at least this many milliseconds has passed.
+	 * If at prepare time less time has passed since unprepare
+	 * finished, the driver waits for the remaining time.
+	 *
+	 * This is T12-min on eDP timing diagrams.
+	 */
+	unsigned int unprepare;
+};
+
+/**
+ * struct panel_desc - Describes a simple panel.
+ */
+struct panel_desc {
+	/**
+	 * @modes: Pointer to array of fixed modes appropriate for this panel.
+	 *
+	 * If only one mode then this can just be the address of the mode.
+	 * NOTE: cannot be used with "timings" and also if this is specified
+	 * then you cannot override the mode in the device tree.
+	 */
+	const struct drm_display_mode *modes;
+
+	/** @num_modes: Number of elements in modes array. */
+	unsigned int num_modes;
+
+	/**
+	 * @timings: Pointer to array of display timings
+	 *
+	 * NOTE: cannot be used with "modes" and also these will be used to
+	 * validate a device tree override if one is present.
+	 */
+	const struct display_timing *timings;
+
+	/** @num_timings: Number of elements in timings array. */
+	unsigned int num_timings;
+
+	/** @bpc: Bits per color. */
+	unsigned int bpc;
+
+	/** @size: Structure containing the physical size of this panel. */
+	struct {
+		/**
+		 * @size.width: Width (in mm) of the active display area.
+		 */
+		unsigned int width;
+
+		/**
+		 * @size.height: Height (in mm) of the active display area.
+		 */
+		unsigned int height;
+	} size;
+
+	/** @delay: Structure containing various delay values for this panel. */
+	struct panel_delay delay;
+};
+
+/**
+ * struct edp_panel_entry - Maps panel ID to delay / panel name.
+ */
+struct edp_panel_entry {
+	/** @panel_id: 32-bit ID for panel, encoded with drm_edid_encode_panel_id(). */
+	u32 panel_id;
+
+	/* @delay: The power sequencing delays needed for this panel. */
+	const struct panel_delay *delay;
+
+	/* @name: Name of this panel (for printing to logs). */
+	const char *name;
+};
+
+struct panel_edp {
+	struct drm_panel base;
+	bool enabled;
+	bool no_hpd;
+
+	bool prepared;
+
+	ktime_t prepared_time;
+	ktime_t unprepared_time;
+
+	const struct panel_desc *desc;
+
+	struct regulator *supply;
+	struct i2c_adapter *ddc;
+	struct drm_dp_aux *aux;
+
+	struct gpio_desc *enable_gpio;
+	struct gpio_desc *hpd_gpio;
+
+	struct edid *edid;
+
+	struct drm_display_mode override_mode;
+
+	enum drm_panel_orientation orientation;
+};
+
+static inline struct panel_edp *to_panel_edp(struct drm_panel *panel)
+{
+	return container_of(panel, struct panel_edp, base);
+}
+
+static unsigned int panel_edp_get_timings_modes(struct panel_edp *panel,
+						struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+	unsigned int i, num = 0;
+
+	for (i = 0; i < panel->desc->num_timings; i++) {
+		const struct display_timing *dt = &panel->desc->timings[i];
+		struct videomode vm;
+
+		videomode_from_timing(dt, &vm);
+		mode = drm_mode_create(connector->dev);
+		if (!mode) {
+			dev_err(panel->base.dev, "failed to add mode %ux%u\n",
+				dt->hactive.typ, dt->vactive.typ);
+			continue;
+		}
+
+		drm_display_mode_from_videomode(&vm, mode);
+
+		mode->type |= DRM_MODE_TYPE_DRIVER;
+
+		if (panel->desc->num_timings == 1)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+		drm_mode_probed_add(connector, mode);
+		num++;
+	}
+
+	return num;
+}
+
+static unsigned int panel_edp_get_display_modes(struct panel_edp *panel,
+						struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+	unsigned int i, num = 0;
+
+	for (i = 0; i < panel->desc->num_modes; i++) {
+		const struct drm_display_mode *m = &panel->desc->modes[i];
+
+		mode = drm_mode_duplicate(connector->dev, m);
+		if (!mode) {
+			dev_err(panel->base.dev, "failed to add mode %ux%u@%u\n",
+				m->hdisplay, m->vdisplay,
+				drm_mode_vrefresh(m));
+			continue;
+		}
+
+		mode->type |= DRM_MODE_TYPE_DRIVER;
+
+		if (panel->desc->num_modes == 1)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+		drm_mode_set_name(mode);
+
+		drm_mode_probed_add(connector, mode);
+		num++;
+	}
+
+	return num;
+}
+
+static int panel_edp_get_non_edid_modes(struct panel_edp *panel,
+					struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+	bool has_override = panel->override_mode.type;
+	unsigned int num = 0;
+
+	if (!panel->desc)
+		return 0;
+
+	if (has_override) {
+		mode = drm_mode_duplicate(connector->dev,
+					  &panel->override_mode);
+		if (mode) {
+			drm_mode_probed_add(connector, mode);
+			num = 1;
+		} else {
+			dev_err(panel->base.dev, "failed to add override mode\n");
+		}
+	}
+
+	/* Only add timings if override was not there or failed to validate */
+	if (num == 0 && panel->desc->num_timings)
+		num = panel_edp_get_timings_modes(panel, connector);
+
+	/*
+	 * Only add fixed modes if timings/override added no mode.
+	 *
+	 * We should only ever have either the display timings specified
+	 * or a fixed mode. Anything else is rather bogus.
+	 */
+	WARN_ON(panel->desc->num_timings && panel->desc->num_modes);
+	if (num == 0)
+		num = panel_edp_get_display_modes(panel, connector);
+
+	connector->display_info.bpc = panel->desc->bpc;
+	connector->display_info.width_mm = panel->desc->size.width;
+	connector->display_info.height_mm = panel->desc->size.height;
+
+	return num;
+}
+
+static void panel_edp_wait(ktime_t start_ktime, unsigned int min_ms)
+{
+	ktime_t now_ktime, min_ktime;
+
+	if (!min_ms)
+		return;
+
+	min_ktime = ktime_add(start_ktime, ms_to_ktime(min_ms));
+	now_ktime = ktime_get();
+
+	if (ktime_before(now_ktime, min_ktime))
+		msleep(ktime_to_ms(ktime_sub(min_ktime, now_ktime)) + 1);
+}
+
+static int panel_edp_disable(struct drm_panel *panel)
+{
+	struct panel_edp *p = to_panel_edp(panel);
+
+	if (!p->enabled)
+		return 0;
+
+	if (p->desc->delay.disable)
+		msleep(p->desc->delay.disable);
+
+	p->enabled = false;
+
+	return 0;
+}
+
+static int panel_edp_suspend(struct device *dev)
+{
+	struct panel_edp *p = dev_get_drvdata(dev);
+
+	gpiod_set_value_cansleep(p->enable_gpio, 0);
+	regulator_disable(p->supply);
+	p->unprepared_time = ktime_get();
+
+	return 0;
+}
+
+static int panel_edp_unprepare(struct drm_panel *panel)
+{
+	struct panel_edp *p = to_panel_edp(panel);
+	int ret;
+
+	/* Unpreparing when already unprepared is a no-op */
+	if (!p->prepared)
+		return 0;
+
+	pm_runtime_mark_last_busy(panel->dev);
+	ret = pm_runtime_put_autosuspend(panel->dev);
+	if (ret < 0)
+		return ret;
+	p->prepared = false;
+
+	return 0;
+}
+
+static int panel_edp_get_hpd_gpio(struct device *dev, struct panel_edp *p)
+{
+	int err;
+
+	p->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
+	if (IS_ERR(p->hpd_gpio)) {
+		err = PTR_ERR(p->hpd_gpio);
+
+		if (err != -EPROBE_DEFER)
+			dev_err(dev, "failed to get 'hpd' GPIO: %d\n", err);
+
+		return err;
+	}
+
+	return 0;
+}
+
+static int panel_edp_prepare_once(struct panel_edp *p)
+{
+	struct device *dev = p->base.dev;
+	unsigned int delay;
+	int err;
+	int hpd_asserted;
+	unsigned long hpd_wait_us;
+
+	panel_edp_wait(p->unprepared_time, p->desc->delay.unprepare);
+
+	err = regulator_enable(p->supply);
+	if (err < 0) {
+		dev_err(dev, "failed to enable supply: %d\n", err);
+		return err;
+	}
+
+	gpiod_set_value_cansleep(p->enable_gpio, 1);
+
+	delay = p->desc->delay.hpd_reliable;
+	if (p->no_hpd)
+		delay = max(delay, p->desc->delay.hpd_absent);
+	if (delay)
+		msleep(delay);
+
+	if (p->hpd_gpio) {
+		if (p->desc->delay.hpd_absent)
+			hpd_wait_us = p->desc->delay.hpd_absent * 1000UL;
+		else
+			hpd_wait_us = 2000000;
+
+		err = readx_poll_timeout(gpiod_get_value_cansleep, p->hpd_gpio,
+					 hpd_asserted, hpd_asserted,
+					 1000, hpd_wait_us);
+		if (hpd_asserted < 0)
+			err = hpd_asserted;
+
+		if (err) {
+			if (err != -ETIMEDOUT)
+				dev_err(dev,
+					"error waiting for hpd GPIO: %d\n", err);
+			goto error;
+		}
+	}
+
+	p->prepared_time = ktime_get();
+
+	return 0;
+
+error:
+	gpiod_set_value_cansleep(p->enable_gpio, 0);
+	regulator_disable(p->supply);
+	p->unprepared_time = ktime_get();
+
+	return err;
+}
+
+/*
+ * Some panels simply don't always come up and need to be power cycled to
+ * work properly.  We'll allow for a handful of retries.
+ */
+#define MAX_PANEL_PREPARE_TRIES		5
+
+static int panel_edp_resume(struct device *dev)
+{
+	struct panel_edp *p = dev_get_drvdata(dev);
+	int ret;
+	int try;
+
+	for (try = 0; try < MAX_PANEL_PREPARE_TRIES; try++) {
+		ret = panel_edp_prepare_once(p);
+		if (ret != -ETIMEDOUT)
+			break;
+	}
+
+	if (ret == -ETIMEDOUT)
+		dev_err(dev, "Prepare timeout after %d tries\n", try);
+	else if (try)
+		dev_warn(dev, "Prepare needed %d retries\n", try);
+
+	return ret;
+}
+
+static int panel_edp_prepare(struct drm_panel *panel)
+{
+	struct panel_edp *p = to_panel_edp(panel);
+	int ret;
+
+	/* Preparing when already prepared is a no-op */
+	if (p->prepared)
+		return 0;
+
+	ret = pm_runtime_get_sync(panel->dev);
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(panel->dev);
+		return ret;
+	}
+
+	p->prepared = true;
+
+	return 0;
+}
+
+static int panel_edp_enable(struct drm_panel *panel)
+{
+	struct panel_edp *p = to_panel_edp(panel);
+	unsigned int delay;
+
+	if (p->enabled)
+		return 0;
+
+	delay = p->desc->delay.enable;
+
+	/*
+	 * If there is a "prepare_to_enable" delay then that's supposed to be
+	 * the delay from HPD going high until we can turn the backlight on.
+	 * However, we can only count this if HPD is handled by the panel
+	 * driver, not if it goes to a dedicated pin on the controller.
+	 * If we aren't handling the HPD pin ourselves then the best we
+	 * can do is assume that HPD went high immediately before we were
+	 * called (and link training took zero time).
+	 *
+	 * NOTE: if we ever end up in this "if" statement then we're
+	 * guaranteed that the panel_edp_wait() call below will do no delay.
+	 * It already handles that case, though, so we don't need any special
+	 * code for it.
+	 */
+	if (p->desc->delay.prepare_to_enable && !p->hpd_gpio && !p->no_hpd)
+		delay = max(delay, p->desc->delay.prepare_to_enable);
+
+	if (delay)
+		msleep(delay);
+
+	panel_edp_wait(p->prepared_time, p->desc->delay.prepare_to_enable);
+
+	p->enabled = true;
+
+	return 0;
+}
+
+static int panel_edp_get_modes(struct drm_panel *panel,
+			       struct drm_connector *connector)
+{
+	struct panel_edp *p = to_panel_edp(panel);
+	int num = 0;
+
+	/* probe EDID if a DDC bus is available */
+	if (p->ddc) {
+		pm_runtime_get_sync(panel->dev);
+
+		if (!p->edid)
+			p->edid = drm_get_edid(connector, p->ddc);
+
+		if (p->edid)
+			num += drm_add_edid_modes(connector, p->edid);
+
+		pm_runtime_mark_last_busy(panel->dev);
+		pm_runtime_put_autosuspend(panel->dev);
+	}
+
+	/*
+	 * Add hard-coded panel modes. Don't call this if there are no timings
+	 * and no modes (the generic edp-panel case) because it will clobber
+	 * the display_info that was already set by drm_add_edid_modes().
+	 */
+	if (p->desc->num_timings || p->desc->num_modes)
+		num += panel_edp_get_non_edid_modes(p, connector);
+	else if (!num)
+		dev_warn(p->base.dev, "No display modes\n");
+
+	/* set up connector's "panel orientation" property */
+	drm_connector_set_panel_orientation(connector, p->orientation);
+
+	return num;
+}
+
+static int panel_edp_get_timings(struct drm_panel *panel,
+				 unsigned int num_timings,
+				 struct display_timing *timings)
+{
+	struct panel_edp *p = to_panel_edp(panel);
+	unsigned int i;
+
+	if (p->desc->num_timings < num_timings)
+		num_timings = p->desc->num_timings;
+
+	if (timings)
+		for (i = 0; i < num_timings; i++)
+			timings[i] = p->desc->timings[i];
+
+	return p->desc->num_timings;
+}
+
+static const struct drm_panel_funcs panel_edp_funcs = {
+	.disable = panel_edp_disable,
+	.unprepare = panel_edp_unprepare,
+	.prepare = panel_edp_prepare,
+	.enable = panel_edp_enable,
+	.get_modes = panel_edp_get_modes,
+	.get_timings = panel_edp_get_timings,
+};
+
+#define PANEL_EDP_BOUNDS_CHECK(to_check, bounds, field) \
+	(to_check->field.typ >= bounds->field.min && \
+	 to_check->field.typ <= bounds->field.max)
+static void panel_edp_parse_panel_timing_node(struct device *dev,
+					      struct panel_edp *panel,
+					      const struct display_timing *ot)
+{
+	const struct panel_desc *desc = panel->desc;
+	struct videomode vm;
+	unsigned int i;
+
+	if (WARN_ON(desc->num_modes)) {
+		dev_err(dev, "Reject override mode: panel has a fixed mode\n");
+		return;
+	}
+	if (WARN_ON(!desc->num_timings)) {
+		dev_err(dev, "Reject override mode: no timings specified\n");
+		return;
+	}
+
+	for (i = 0; i < panel->desc->num_timings; i++) {
+		const struct display_timing *dt = &panel->desc->timings[i];
+
+		if (!PANEL_EDP_BOUNDS_CHECK(ot, dt, hactive) ||
+		    !PANEL_EDP_BOUNDS_CHECK(ot, dt, hfront_porch) ||
+		    !PANEL_EDP_BOUNDS_CHECK(ot, dt, hback_porch) ||
+		    !PANEL_EDP_BOUNDS_CHECK(ot, dt, hsync_len) ||
+		    !PANEL_EDP_BOUNDS_CHECK(ot, dt, vactive) ||
+		    !PANEL_EDP_BOUNDS_CHECK(ot, dt, vfront_porch) ||
+		    !PANEL_EDP_BOUNDS_CHECK(ot, dt, vback_porch) ||
+		    !PANEL_EDP_BOUNDS_CHECK(ot, dt, vsync_len))
+			continue;
+
+		if (ot->flags != dt->flags)
+			continue;
+
+		videomode_from_timing(ot, &vm);
+		drm_display_mode_from_videomode(&vm, &panel->override_mode);
+		panel->override_mode.type |= DRM_MODE_TYPE_DRIVER |
+					     DRM_MODE_TYPE_PREFERRED;
+		break;
+	}
+
+	if (WARN_ON(!panel->override_mode.type))
+		dev_err(dev, "Reject override mode: No display_timing found\n");
+}
+
+static const struct edp_panel_entry *find_edp_panel(u32 panel_id);
+
+static int generic_edp_panel_probe(struct device *dev, struct panel_edp *panel)
+{
+	const struct edp_panel_entry *edp_panel;
+	struct panel_desc *desc;
+	u32 panel_id;
+	char vend[4];
+	u16 product_id;
+	u32 reliable_ms = 0;
+	u32 absent_ms = 0;
+	int ret;
+
+	desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
+	if (!desc)
+		return -ENOMEM;
+	panel->desc = desc;
+
+	/*
+	 * Read the dts properties for the initial probe. These are used by
+	 * the runtime resume code which will get called by the
+	 * pm_runtime_get_sync() call below.
+	 */
+	of_property_read_u32(dev->of_node, "hpd-reliable-delay-ms", &reliable_ms);
+	desc->delay.hpd_reliable = reliable_ms;
+	of_property_read_u32(dev->of_node, "hpd-absent-delay-ms", &absent_ms);
+	desc->delay.hpd_reliable = absent_ms;
+
+	/* Power the panel on so we can read the EDID */
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "Couldn't power on panel to read EDID: %d\n", ret);
+		goto exit;
+	}
+
+	panel_id = drm_edid_get_panel_id(panel->ddc);
+	if (!panel_id) {
+		dev_err(dev, "Couldn't identify panel via EDID\n");
+		ret = -EIO;
+		goto exit;
+	}
+	drm_edid_decode_panel_id(panel_id, vend, &product_id);
+
+	edp_panel = find_edp_panel(panel_id);
+
+	/*
+	 * We're using non-optimized timings and want it really obvious that
+	 * someone needs to add an entry to the table, so we'll do a WARN_ON
+	 * splat.
+	 */
+	if (WARN_ON(!edp_panel)) {
+		dev_warn(dev,
+			 "Unknown panel %s %#06x, using conservative timings\n",
+			 vend, product_id);
+
+		/*
+		 * It's highly likely that the panel will work if we use very
+		 * conservative timings, so let's do that. We already know that
+		 * the HPD-related delays must have worked since we got this
+		 * far, so we really just need the "unprepare" / "enable"
+		 * delays. We don't need "prepare_to_enable" since that
+		 * overlaps the "enable" delay anyway.
+		 *
+		 * Nearly all panels have a "unprepare" delay of 500 ms though
+		 * there are a few with 1000. Let's stick 2000 in just to be
+		 * super conservative.
+		 *
+		 * An "enable" delay of 80 ms seems the most common, but we'll
+		 * throw in 200 ms to be safe.
+		 */
+		desc->delay.unprepare = 2000;
+		desc->delay.enable = 200;
+	} else {
+		dev_info(dev, "Detected %s %s (%#06x)\n",
+			 vend, edp_panel->name, product_id);
+
+		/* Update the delay; everything else comes from EDID */
+		desc->delay = *edp_panel->delay;
+	}
+
+	ret = 0;
+exit:
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+static int panel_edp_probe(struct device *dev, const struct panel_desc *desc,
+			   struct drm_dp_aux *aux)
+{
+	struct panel_edp *panel;
+	struct display_timing dt;
+	struct device_node *ddc;
+	int err;
+
+	panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL);
+	if (!panel)
+		return -ENOMEM;
+
+	panel->enabled = false;
+	panel->prepared_time = 0;
+	panel->desc = desc;
+	panel->aux = aux;
+
+	panel->no_hpd = of_property_read_bool(dev->of_node, "no-hpd");
+	if (!panel->no_hpd) {
+		err = panel_edp_get_hpd_gpio(dev, panel);
+		if (err)
+			return err;
+	}
+
+	panel->supply = devm_regulator_get(dev, "power");
+	if (IS_ERR(panel->supply))
+		return PTR_ERR(panel->supply);
+
+	panel->enable_gpio = devm_gpiod_get_optional(dev, "enable",
+						     GPIOD_OUT_LOW);
+	if (IS_ERR(panel->enable_gpio)) {
+		err = PTR_ERR(panel->enable_gpio);
+		if (err != -EPROBE_DEFER)
+			dev_err(dev, "failed to request GPIO: %d\n", err);
+		return err;
+	}
+
+	err = of_drm_get_panel_orientation(dev->of_node, &panel->orientation);
+	if (err) {
+		dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, err);
+		return err;
+	}
+
+	ddc = of_parse_phandle(dev->of_node, "ddc-i2c-bus", 0);
+	if (ddc) {
+		panel->ddc = of_find_i2c_adapter_by_node(ddc);
+		of_node_put(ddc);
+
+		if (!panel->ddc)
+			return -EPROBE_DEFER;
+	} else if (aux) {
+		panel->ddc = &aux->ddc;
+	}
+
+	if (!of_get_display_timing(dev->of_node, "panel-timing", &dt))
+		panel_edp_parse_panel_timing_node(dev, panel, &dt);
+
+	dev_set_drvdata(dev, panel);
+
+	drm_panel_init(&panel->base, dev, &panel_edp_funcs, DRM_MODE_CONNECTOR_eDP);
+
+	err = drm_panel_of_backlight(&panel->base);
+	if (err)
+		goto err_finished_ddc_init;
+
+	/*
+	 * We use runtime PM for prepare / unprepare since those power the panel
+	 * on and off and those can be very slow operations. This is important
+	 * to optimize powering the panel on briefly to read the EDID before
+	 * fully enabling the panel.
+	 */
+	pm_runtime_enable(dev);
+	pm_runtime_set_autosuspend_delay(dev, 1000);
+	pm_runtime_use_autosuspend(dev);
+
+	if (of_device_is_compatible(dev->of_node, "edp-panel")) {
+		err = generic_edp_panel_probe(dev, panel);
+		if (err) {
+			dev_err_probe(dev, err,
+				      "Couldn't detect panel nor find a fallback\n");
+			goto err_finished_pm_runtime;
+		}
+		/* generic_edp_panel_probe() replaces desc in the panel */
+		desc = panel->desc;
+	} else if (desc->bpc != 6 && desc->bpc != 8 && desc->bpc != 10) {
+		dev_warn(dev, "Expected bpc in {6,8,10} but got: %u\n", desc->bpc);
+	}
+
+	if (!panel->base.backlight && panel->aux) {
+		pm_runtime_get_sync(dev);
+		err = drm_panel_dp_aux_backlight(&panel->base, panel->aux);
+		pm_runtime_mark_last_busy(dev);
+		pm_runtime_put_autosuspend(dev);
+		if (err)
+			goto err_finished_pm_runtime;
+	}
+
+	drm_panel_add(&panel->base);
+
+	return 0;
+
+err_finished_pm_runtime:
+	pm_runtime_dont_use_autosuspend(dev);
+	pm_runtime_disable(dev);
+err_finished_ddc_init:
+	if (panel->ddc && (!panel->aux || panel->ddc != &panel->aux->ddc))
+		put_device(&panel->ddc->dev);
+
+	return err;
+}
+
+static int panel_edp_remove(struct device *dev)
+{
+	struct panel_edp *panel = dev_get_drvdata(dev);
+
+	drm_panel_remove(&panel->base);
+	drm_panel_disable(&panel->base);
+	drm_panel_unprepare(&panel->base);
+
+	pm_runtime_dont_use_autosuspend(dev);
+	pm_runtime_disable(dev);
+	if (panel->ddc && (!panel->aux || panel->ddc != &panel->aux->ddc))
+		put_device(&panel->ddc->dev);
+
+	kfree(panel->edid);
+	panel->edid = NULL;
+
+	return 0;
+}
+
+static void panel_edp_shutdown(struct device *dev)
+{
+	struct panel_edp *panel = dev_get_drvdata(dev);
+
+	drm_panel_disable(&panel->base);
+	drm_panel_unprepare(&panel->base);
+}
+
+static const struct display_timing auo_b101ean01_timing = {
+	.pixelclock = { 65300000, 72500000, 75000000 },
+	.hactive = { 1280, 1280, 1280 },
+	.hfront_porch = { 18, 119, 119 },
+	.hback_porch = { 21, 21, 21 },
+	.hsync_len = { 32, 32, 32 },
+	.vactive = { 800, 800, 800 },
+	.vfront_porch = { 4, 4, 4 },
+	.vback_porch = { 8, 8, 8 },
+	.vsync_len = { 18, 20, 20 },
+};
+
+static const struct panel_desc auo_b101ean01 = {
+	.timings = &auo_b101ean01_timing,
+	.num_timings = 1,
+	.bpc = 6,
+	.size = {
+		.width = 217,
+		.height = 136,
+	},
+};
+
+static const struct drm_display_mode auo_b116xak01_mode = {
+	.clock = 69300,
+	.hdisplay = 1366,
+	.hsync_start = 1366 + 48,
+	.hsync_end = 1366 + 48 + 32,
+	.htotal = 1366 + 48 + 32 + 10,
+	.vdisplay = 768,
+	.vsync_start = 768 + 4,
+	.vsync_end = 768 + 4 + 6,
+	.vtotal = 768 + 4 + 6 + 15,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc auo_b116xak01 = {
+	.modes = &auo_b116xak01_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 256,
+		.height = 144,
+	},
+	.delay = {
+		.hpd_absent = 200,
+	},
+};
+
+static const struct drm_display_mode auo_b116xw03_mode = {
+	.clock = 70589,
+	.hdisplay = 1366,
+	.hsync_start = 1366 + 40,
+	.hsync_end = 1366 + 40 + 40,
+	.htotal = 1366 + 40 + 40 + 32,
+	.vdisplay = 768,
+	.vsync_start = 768 + 10,
+	.vsync_end = 768 + 10 + 12,
+	.vtotal = 768 + 10 + 12 + 6,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc auo_b116xw03 = {
+	.modes = &auo_b116xw03_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 256,
+		.height = 144,
+	},
+	.delay = {
+		.enable = 400,
+	},
+};
+
+static const struct drm_display_mode auo_b133han05_mode = {
+	.clock = 142600,
+	.hdisplay = 1920,
+	.hsync_start = 1920 + 58,
+	.hsync_end = 1920 + 58 + 42,
+	.htotal = 1920 + 58 + 42 + 60,
+	.vdisplay = 1080,
+	.vsync_start = 1080 + 3,
+	.vsync_end = 1080 + 3 + 5,
+	.vtotal = 1080 + 3 + 5 + 54,
+};
+
+static const struct panel_desc auo_b133han05 = {
+	.modes = &auo_b133han05_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 293,
+		.height = 165,
+	},
+	.delay = {
+		.hpd_reliable = 100,
+		.enable = 20,
+		.unprepare = 50,
+	},
+};
+
+static const struct drm_display_mode auo_b133htn01_mode = {
+	.clock = 150660,
+	.hdisplay = 1920,
+	.hsync_start = 1920 + 172,
+	.hsync_end = 1920 + 172 + 80,
+	.htotal = 1920 + 172 + 80 + 60,
+	.vdisplay = 1080,
+	.vsync_start = 1080 + 25,
+	.vsync_end = 1080 + 25 + 10,
+	.vtotal = 1080 + 25 + 10 + 10,
+};
+
+static const struct panel_desc auo_b133htn01 = {
+	.modes = &auo_b133htn01_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 293,
+		.height = 165,
+	},
+	.delay = {
+		.hpd_reliable = 105,
+		.enable = 20,
+		.unprepare = 50,
+	},
+};
+
+static const struct drm_display_mode auo_b133xtn01_mode = {
+	.clock = 69500,
+	.hdisplay = 1366,
+	.hsync_start = 1366 + 48,
+	.hsync_end = 1366 + 48 + 32,
+	.htotal = 1366 + 48 + 32 + 20,
+	.vdisplay = 768,
+	.vsync_start = 768 + 3,
+	.vsync_end = 768 + 3 + 6,
+	.vtotal = 768 + 3 + 6 + 13,
+};
+
+static const struct panel_desc auo_b133xtn01 = {
+	.modes = &auo_b133xtn01_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 293,
+		.height = 165,
+	},
+};
+
+static const struct drm_display_mode auo_b140han06_mode = {
+	.clock = 141000,
+	.hdisplay = 1920,
+	.hsync_start = 1920 + 16,
+	.hsync_end = 1920 + 16 + 16,
+	.htotal = 1920 + 16 + 16 + 152,
+	.vdisplay = 1080,
+	.vsync_start = 1080 + 3,
+	.vsync_end = 1080 + 3 + 14,
+	.vtotal = 1080 + 3 + 14 + 19,
+};
+
+static const struct panel_desc auo_b140han06 = {
+	.modes = &auo_b140han06_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 309,
+		.height = 174,
+	},
+	.delay = {
+		.hpd_reliable = 100,
+		.enable = 20,
+		.unprepare = 50,
+	},
+};
+
+static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
+	{
+		.clock = 71900,
+		.hdisplay = 1280,
+		.hsync_start = 1280 + 48,
+		.hsync_end = 1280 + 48 + 32,
+		.htotal = 1280 + 48 + 32 + 80,
+		.vdisplay = 800,
+		.vsync_start = 800 + 3,
+		.vsync_end = 800 + 3 + 5,
+		.vtotal = 800 + 3 + 5 + 24,
+	},
+	{
+		.clock = 57500,
+		.hdisplay = 1280,
+		.hsync_start = 1280 + 48,
+		.hsync_end = 1280 + 48 + 32,
+		.htotal = 1280 + 48 + 32 + 80,
+		.vdisplay = 800,
+		.vsync_start = 800 + 3,
+		.vsync_end = 800 + 3 + 5,
+		.vtotal = 800 + 3 + 5 + 24,
+	},
+};
+
+static const struct panel_desc boe_nv101wxmn51 = {
+	.modes = boe_nv101wxmn51_modes,
+	.num_modes = ARRAY_SIZE(boe_nv101wxmn51_modes),
+	.bpc = 8,
+	.size = {
+		.width = 217,
+		.height = 136,
+	},
+	.delay = {
+		/* TODO: should be hpd-absent and no-hpd should be set? */
+		.hpd_reliable = 210,
+		.enable = 50,
+		.unprepare = 160,
+	},
+};
+
+static const struct drm_display_mode boe_nv110wtm_n61_modes[] = {
+	{
+		.clock = 207800,
+		.hdisplay = 2160,
+		.hsync_start = 2160 + 48,
+		.hsync_end = 2160 + 48 + 32,
+		.htotal = 2160 + 48 + 32 + 100,
+		.vdisplay = 1440,
+		.vsync_start = 1440 + 3,
+		.vsync_end = 1440 + 3 + 6,
+		.vtotal = 1440 + 3 + 6 + 31,
+		.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
+	},
+	{
+		.clock = 138500,
+		.hdisplay = 2160,
+		.hsync_start = 2160 + 48,
+		.hsync_end = 2160 + 48 + 32,
+		.htotal = 2160 + 48 + 32 + 100,
+		.vdisplay = 1440,
+		.vsync_start = 1440 + 3,
+		.vsync_end = 1440 + 3 + 6,
+		.vtotal = 1440 + 3 + 6 + 31,
+		.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
+	},
+};
+
+static const struct panel_desc boe_nv110wtm_n61 = {
+	.modes = boe_nv110wtm_n61_modes,
+	.num_modes = ARRAY_SIZE(boe_nv110wtm_n61_modes),
+	.bpc = 8,
+	.size = {
+		.width = 233,
+		.height = 155,
+	},
+	.delay = {
+		.hpd_absent = 200,
+		.prepare_to_enable = 80,
+		.enable = 50,
+		.unprepare = 500,
+	},
+};
+
+/* Also used for boe_nv133fhm_n62 */
+static const struct drm_display_mode boe_nv133fhm_n61_modes = {
+	.clock = 147840,
+	.hdisplay = 1920,
+	.hsync_start = 1920 + 48,
+	.hsync_end = 1920 + 48 + 32,
+	.htotal = 1920 + 48 + 32 + 200,
+	.vdisplay = 1080,
+	.vsync_start = 1080 + 3,
+	.vsync_end = 1080 + 3 + 6,
+	.vtotal = 1080 + 3 + 6 + 31,
+	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+/* Also used for boe_nv133fhm_n62 */
+static const struct panel_desc boe_nv133fhm_n61 = {
+	.modes = &boe_nv133fhm_n61_modes,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 294,
+		.height = 165,
+	},
+	.delay = {
+		/*
+		 * When power is first given to the panel there's a short
+		 * spike on the HPD line.  It was explained that this spike
+		 * was until the TCON data download was complete.  On
+		 * one system this was measured at 8 ms.  We'll put 15 ms
+		 * in the prepare delay just to be safe.  That means:
+		 * - If HPD isn't hooked up you still have 200 ms delay.
+		 * - If HPD is hooked up we won't try to look at it for the
+		 *   first 15 ms.
+		 */
+		.hpd_reliable = 15,
+		.hpd_absent = 200,
+
+		.unprepare = 500,
+	},
+};
+
+static const struct drm_display_mode boe_nv140fhmn49_modes[] = {
+	{
+		.clock = 148500,
+		.hdisplay = 1920,
+		.hsync_start = 1920 + 48,
+		.hsync_end = 1920 + 48 + 32,
+		.htotal = 2200,
+		.vdisplay = 1080,
+		.vsync_start = 1080 + 3,
+		.vsync_end = 1080 + 3 + 5,
+		.vtotal = 1125,
+	},
+};
+
+static const struct panel_desc boe_nv140fhmn49 = {
+	.modes = boe_nv140fhmn49_modes,
+	.num_modes = ARRAY_SIZE(boe_nv140fhmn49_modes),
+	.bpc = 6,
+	.size = {
+		.width = 309,
+		.height = 174,
+	},
+	.delay = {
+		/* TODO: should be hpd-absent and no-hpd should be set? */
+		.hpd_reliable = 210,
+		.enable = 50,
+		.unprepare = 160,
+	},
+};
+
+static const struct drm_display_mode innolux_n116bca_ea1_mode = {
+	.clock = 76420,
+	.hdisplay = 1366,
+	.hsync_start = 1366 + 136,
+	.hsync_end = 1366 + 136 + 30,
+	.htotal = 1366 + 136 + 30 + 60,
+	.vdisplay = 768,
+	.vsync_start = 768 + 8,
+	.vsync_end = 768 + 8 + 12,
+	.vtotal = 768 + 8 + 12 + 12,
+	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+static const struct panel_desc innolux_n116bca_ea1 = {
+	.modes = &innolux_n116bca_ea1_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 256,
+		.height = 144,
+	},
+	.delay = {
+		.hpd_absent = 200,
+		.prepare_to_enable = 80,
+		.unprepare = 500,
+	},
+};
+
+/*
+ * Datasheet specifies that at 60 Hz refresh rate:
+ * - total horizontal time: { 1506, 1592, 1716 }
+ * - total vertical time: { 788, 800, 868 }
+ *
+ * ...but doesn't go into exactly how that should be split into a front
+ * porch, back porch, or sync length.  For now we'll leave a single setting
+ * here which allows a bit of tweaking of the pixel clock at the expense of
+ * refresh rate.
+ */
+static const struct display_timing innolux_n116bge_timing = {
+	.pixelclock = { 72600000, 76420000, 80240000 },
+	.hactive = { 1366, 1366, 1366 },
+	.hfront_porch = { 136, 136, 136 },
+	.hback_porch = { 60, 60, 60 },
+	.hsync_len = { 30, 30, 30 },
+	.vactive = { 768, 768, 768 },
+	.vfront_porch = { 8, 8, 8 },
+	.vback_porch = { 12, 12, 12 },
+	.vsync_len = { 12, 12, 12 },
+	.flags = DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_HSYNC_LOW,
+};
+
+static const struct panel_desc innolux_n116bge = {
+	.timings = &innolux_n116bge_timing,
+	.num_timings = 1,
+	.bpc = 6,
+	.size = {
+		.width = 256,
+		.height = 144,
+	},
+};
+
+static const struct drm_display_mode innolux_n125hce_gn1_mode = {
+	.clock = 162000,
+	.hdisplay = 1920,
+	.hsync_start = 1920 + 40,
+	.hsync_end = 1920 + 40 + 40,
+	.htotal = 1920 + 40 + 40 + 80,
+	.vdisplay = 1080,
+	.vsync_start = 1080 + 4,
+	.vsync_end = 1080 + 4 + 4,
+	.vtotal = 1080 + 4 + 4 + 24,
+};
+
+static const struct panel_desc innolux_n125hce_gn1 = {
+	.modes = &innolux_n125hce_gn1_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 276,
+		.height = 155,
+	},
+};
+
+static const struct drm_display_mode innolux_p120zdg_bf1_mode = {
+	.clock = 206016,
+	.hdisplay = 2160,
+	.hsync_start = 2160 + 48,
+	.hsync_end = 2160 + 48 + 32,
+	.htotal = 2160 + 48 + 32 + 80,
+	.vdisplay = 1440,
+	.vsync_start = 1440 + 3,
+	.vsync_end = 1440 + 3 + 10,
+	.vtotal = 1440 + 3 + 10 + 27,
+	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+};
+
+static const struct panel_desc innolux_p120zdg_bf1 = {
+	.modes = &innolux_p120zdg_bf1_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 254,
+		.height = 169,
+	},
+	.delay = {
+		.hpd_absent = 200,
+		.unprepare = 500,
+	},
+};
+
+static const struct drm_display_mode ivo_m133nwf4_r0_mode = {
+	.clock = 138778,
+	.hdisplay = 1920,
+	.hsync_start = 1920 + 24,
+	.hsync_end = 1920 + 24 + 48,
+	.htotal = 1920 + 24 + 48 + 88,
+	.vdisplay = 1080,
+	.vsync_start = 1080 + 3,
+	.vsync_end = 1080 + 3 + 12,
+	.vtotal = 1080 + 3 + 12 + 17,
+	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+};
+
+static const struct panel_desc ivo_m133nwf4_r0 = {
+	.modes = &ivo_m133nwf4_r0_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 294,
+		.height = 165,
+	},
+	.delay = {
+		.hpd_absent = 200,
+		.unprepare = 500,
+	},
+};
+
+static const struct drm_display_mode kingdisplay_kd116n21_30nv_a010_mode = {
+	.clock = 81000,
+	.hdisplay = 1366,
+	.hsync_start = 1366 + 40,
+	.hsync_end = 1366 + 40 + 32,
+	.htotal = 1366 + 40 + 32 + 62,
+	.vdisplay = 768,
+	.vsync_start = 768 + 5,
+	.vsync_end = 768 + 5 + 5,
+	.vtotal = 768 + 5 + 5 + 122,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc kingdisplay_kd116n21_30nv_a010 = {
+	.modes = &kingdisplay_kd116n21_30nv_a010_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 256,
+		.height = 144,
+	},
+	.delay = {
+		.hpd_absent = 200,
+	},
+};
+
+static const struct drm_display_mode lg_lp079qx1_sp0v_mode = {
+	.clock = 200000,
+	.hdisplay = 1536,
+	.hsync_start = 1536 + 12,
+	.hsync_end = 1536 + 12 + 16,
+	.htotal = 1536 + 12 + 16 + 48,
+	.vdisplay = 2048,
+	.vsync_start = 2048 + 8,
+	.vsync_end = 2048 + 8 + 4,
+	.vtotal = 2048 + 8 + 4 + 8,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc lg_lp079qx1_sp0v = {
+	.modes = &lg_lp079qx1_sp0v_mode,
+	.num_modes = 1,
+	.size = {
+		.width = 129,
+		.height = 171,
+	},
+};
+
+static const struct drm_display_mode lg_lp097qx1_spa1_mode = {
+	.clock = 205210,
+	.hdisplay = 2048,
+	.hsync_start = 2048 + 150,
+	.hsync_end = 2048 + 150 + 5,
+	.htotal = 2048 + 150 + 5 + 5,
+	.vdisplay = 1536,
+	.vsync_start = 1536 + 3,
+	.vsync_end = 1536 + 3 + 1,
+	.vtotal = 1536 + 3 + 1 + 9,
+};
+
+static const struct panel_desc lg_lp097qx1_spa1 = {
+	.modes = &lg_lp097qx1_spa1_mode,
+	.num_modes = 1,
+	.size = {
+		.width = 208,
+		.height = 147,
+	},
+};
+
+static const struct drm_display_mode lg_lp120up1_mode = {
+	.clock = 162300,
+	.hdisplay = 1920,
+	.hsync_start = 1920 + 40,
+	.hsync_end = 1920 + 40 + 40,
+	.htotal = 1920 + 40 + 40 + 80,
+	.vdisplay = 1280,
+	.vsync_start = 1280 + 4,
+	.vsync_end = 1280 + 4 + 4,
+	.vtotal = 1280 + 4 + 4 + 12,
+};
+
+static const struct panel_desc lg_lp120up1 = {
+	.modes = &lg_lp120up1_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 267,
+		.height = 183,
+	},
+};
+
+static const struct drm_display_mode lg_lp129qe_mode = {
+	.clock = 285250,
+	.hdisplay = 2560,
+	.hsync_start = 2560 + 48,
+	.hsync_end = 2560 + 48 + 32,
+	.htotal = 2560 + 48 + 32 + 80,
+	.vdisplay = 1700,
+	.vsync_start = 1700 + 3,
+	.vsync_end = 1700 + 3 + 10,
+	.vtotal = 1700 + 3 + 10 + 36,
+};
+
+static const struct panel_desc lg_lp129qe = {
+	.modes = &lg_lp129qe_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 272,
+		.height = 181,
+	},
+};
+
+static const struct drm_display_mode neweast_wjfh116008a_modes[] = {
+	{
+		.clock = 138500,
+		.hdisplay = 1920,
+		.hsync_start = 1920 + 48,
+		.hsync_end = 1920 + 48 + 32,
+		.htotal = 1920 + 48 + 32 + 80,
+		.vdisplay = 1080,
+		.vsync_start = 1080 + 3,
+		.vsync_end = 1080 + 3 + 5,
+		.vtotal = 1080 + 3 + 5 + 23,
+		.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+	}, {
+		.clock = 110920,
+		.hdisplay = 1920,
+		.hsync_start = 1920 + 48,
+		.hsync_end = 1920 + 48 + 32,
+		.htotal = 1920 + 48 + 32 + 80,
+		.vdisplay = 1080,
+		.vsync_start = 1080 + 3,
+		.vsync_end = 1080 + 3 + 5,
+		.vtotal = 1080 + 3 + 5 + 23,
+		.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+	}
+};
+
+static const struct panel_desc neweast_wjfh116008a = {
+	.modes = neweast_wjfh116008a_modes,
+	.num_modes = 2,
+	.bpc = 6,
+	.size = {
+		.width = 260,
+		.height = 150,
+	},
+	.delay = {
+		.hpd_reliable = 110,
+		.enable = 20,
+		.unprepare = 500,
+	},
+};
+
+static const struct drm_display_mode samsung_lsn122dl01_c01_mode = {
+	.clock = 271560,
+	.hdisplay = 2560,
+	.hsync_start = 2560 + 48,
+	.hsync_end = 2560 + 48 + 32,
+	.htotal = 2560 + 48 + 32 + 80,
+	.vdisplay = 1600,
+	.vsync_start = 1600 + 2,
+	.vsync_end = 1600 + 2 + 5,
+	.vtotal = 1600 + 2 + 5 + 57,
+};
+
+static const struct panel_desc samsung_lsn122dl01_c01 = {
+	.modes = &samsung_lsn122dl01_c01_mode,
+	.num_modes = 1,
+	.size = {
+		.width = 263,
+		.height = 164,
+	},
+};
+
+static const struct drm_display_mode samsung_ltn140at29_301_mode = {
+	.clock = 76300,
+	.hdisplay = 1366,
+	.hsync_start = 1366 + 64,
+	.hsync_end = 1366 + 64 + 48,
+	.htotal = 1366 + 64 + 48 + 128,
+	.vdisplay = 768,
+	.vsync_start = 768 + 2,
+	.vsync_end = 768 + 2 + 5,
+	.vtotal = 768 + 2 + 5 + 17,
+};
+
+static const struct panel_desc samsung_ltn140at29_301 = {
+	.modes = &samsung_ltn140at29_301_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 320,
+		.height = 187,
+	},
+};
+
+static const struct drm_display_mode sharp_ld_d5116z01b_mode = {
+	.clock = 168480,
+	.hdisplay = 1920,
+	.hsync_start = 1920 + 48,
+	.hsync_end = 1920 + 48 + 32,
+	.htotal = 1920 + 48 + 32 + 80,
+	.vdisplay = 1280,
+	.vsync_start = 1280 + 3,
+	.vsync_end = 1280 + 3 + 10,
+	.vtotal = 1280 + 3 + 10 + 57,
+	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+};
+
+static const struct panel_desc sharp_ld_d5116z01b = {
+	.modes = &sharp_ld_d5116z01b_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 260,
+		.height = 120,
+	},
+};
+
+static const struct display_timing sharp_lq123p1jx31_timing = {
+	.pixelclock = { 252750000, 252750000, 266604720 },
+	.hactive = { 2400, 2400, 2400 },
+	.hfront_porch = { 48, 48, 48 },
+	.hback_porch = { 80, 80, 84 },
+	.hsync_len = { 32, 32, 32 },
+	.vactive = { 1600, 1600, 1600 },
+	.vfront_porch = { 3, 3, 3 },
+	.vback_porch = { 33, 33, 120 },
+	.vsync_len = { 10, 10, 10 },
+	.flags = DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_HSYNC_LOW,
+};
+
+static const struct panel_desc sharp_lq123p1jx31 = {
+	.timings = &sharp_lq123p1jx31_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 259,
+		.height = 173,
+	},
+	.delay = {
+		.hpd_reliable = 110,
+		.enable = 50,
+		.unprepare = 550,
+	},
+};
+
+static const struct drm_display_mode starry_kr122ea0sra_mode = {
+	.clock = 147000,
+	.hdisplay = 1920,
+	.hsync_start = 1920 + 16,
+	.hsync_end = 1920 + 16 + 16,
+	.htotal = 1920 + 16 + 16 + 32,
+	.vdisplay = 1200,
+	.vsync_start = 1200 + 15,
+	.vsync_end = 1200 + 15 + 2,
+	.vtotal = 1200 + 15 + 2 + 18,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc starry_kr122ea0sra = {
+	.modes = &starry_kr122ea0sra_mode,
+	.num_modes = 1,
+	.size = {
+		.width = 263,
+		.height = 164,
+	},
+	.delay = {
+		/* TODO: should be hpd-absent and no-hpd should be set? */
+		.hpd_reliable = 10 + 200,
+		.enable = 50,
+		.unprepare = 10 + 500,
+	},
+};
+
+static const struct of_device_id platform_of_match[] = {
+	{
+		/* Must be first */
+		.compatible = "edp-panel",
+	}, {
+		.compatible = "auo,b101ean01",
+		.data = &auo_b101ean01,
+	}, {
+		.compatible = "auo,b116xa01",
+		.data = &auo_b116xak01,
+	}, {
+		.compatible = "auo,b116xw03",
+		.data = &auo_b116xw03,
+	}, {
+		.compatible = "auo,b133han05",
+		.data = &auo_b133han05,
+	}, {
+		.compatible = "auo,b133htn01",
+		.data = &auo_b133htn01,
+	}, {
+		.compatible = "auo,b133xtn01",
+		.data = &auo_b133xtn01,
+	}, {
+		.compatible = "auo,b140han06",
+		.data = &auo_b140han06,
+	}, {
+		.compatible = "boe,nv101wxmn51",
+		.data = &boe_nv101wxmn51,
+	}, {
+		.compatible = "boe,nv110wtm-n61",
+		.data = &boe_nv110wtm_n61,
+	}, {
+		.compatible = "boe,nv133fhm-n61",
+		.data = &boe_nv133fhm_n61,
+	}, {
+		.compatible = "boe,nv133fhm-n62",
+		.data = &boe_nv133fhm_n61,
+	}, {
+		.compatible = "boe,nv140fhmn49",
+		.data = &boe_nv140fhmn49,
+	}, {
+		.compatible = "innolux,n116bca-ea1",
+		.data = &innolux_n116bca_ea1,
+	}, {
+		.compatible = "innolux,n116bge",
+		.data = &innolux_n116bge,
+	}, {
+		.compatible = "innolux,n125hce-gn1",
+		.data = &innolux_n125hce_gn1,
+	}, {
+		.compatible = "innolux,p120zdg-bf1",
+		.data = &innolux_p120zdg_bf1,
+	}, {
+		.compatible = "ivo,m133nwf4-r0",
+		.data = &ivo_m133nwf4_r0,
+	}, {
+		.compatible = "kingdisplay,kd116n21-30nv-a010",
+		.data = &kingdisplay_kd116n21_30nv_a010,
+	}, {
+		.compatible = "lg,lp079qx1-sp0v",
+		.data = &lg_lp079qx1_sp0v,
+	}, {
+		.compatible = "lg,lp097qx1-spa1",
+		.data = &lg_lp097qx1_spa1,
+	}, {
+		.compatible = "lg,lp120up1",
+		.data = &lg_lp120up1,
+	}, {
+		.compatible = "lg,lp129qe",
+		.data = &lg_lp129qe,
+	}, {
+		.compatible = "neweast,wjfh116008a",
+		.data = &neweast_wjfh116008a,
+	}, {
+		.compatible = "samsung,lsn122dl01-c01",
+		.data = &samsung_lsn122dl01_c01,
+	}, {
+		.compatible = "samsung,ltn140at29-301",
+		.data = &samsung_ltn140at29_301,
+	}, {
+		.compatible = "sharp,ld-d5116z01b",
+		.data = &sharp_ld_d5116z01b,
+	}, {
+		.compatible = "sharp,lq123p1jx31",
+		.data = &sharp_lq123p1jx31,
+	}, {
+		.compatible = "starry,kr122ea0sra",
+		.data = &starry_kr122ea0sra,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, platform_of_match);
+
+static const struct panel_delay delay_200_500_p2e80 = {
+	.hpd_absent = 200,
+	.unprepare = 500,
+	.prepare_to_enable = 80,
+};
+
+static const struct panel_delay delay_200_500_p2e100 = {
+	.hpd_absent = 200,
+	.unprepare = 500,
+	.prepare_to_enable = 100,
+};
+
+static const struct panel_delay delay_200_500_e50 = {
+	.hpd_absent = 200,
+	.unprepare = 500,
+	.enable = 50,
+};
+
+#define EDP_PANEL_ENTRY(vend, product_id, _delay, _name) \
+{ \
+	.name = _name, \
+	.panel_id = drm_edid_encode_panel_id(vend, product_id), \
+	.delay = _delay \
+}
+
+/*
+ * This table is used to figure out power sequencing delays for panels that
+ * are detected by EDID. Entries here may point to entries in the
+ * platform_of_match table (if a panel is listed in both places).
+ *
+ * Sort first by vendor, then by product ID.
+ */
+static const struct edp_panel_entry edp_panels[] = {
+	EDP_PANEL_ENTRY("AUO", 0x405c, &auo_b116xak01.delay, "B116XAK01"),
+	EDP_PANEL_ENTRY("AUO", 0x615c, &delay_200_500_e50, "B116XAN06.1"),
+
+	EDP_PANEL_ENTRY("BOE", 0x0786, &delay_200_500_p2e80, "NV116WHM-T01"),
+	EDP_PANEL_ENTRY("BOE", 0x07d1, &boe_nv133fhm_n61.delay, "NV133FHM-N61"),
+	EDP_PANEL_ENTRY("BOE", 0x082d, &boe_nv133fhm_n61.delay, "NV133FHM-N62"),
+	EDP_PANEL_ENTRY("BOE", 0x098d, &boe_nv110wtm_n61.delay, "NV110WTM-N61"),
+
+	EDP_PANEL_ENTRY("CMN", 0x114c, &innolux_n116bca_ea1.delay, "N116BCA-EA1"),
+
+	EDP_PANEL_ENTRY("KDB", 0x0624, &kingdisplay_kd116n21_30nv_a010.delay, "116N21-30NV-A010"),
+
+	EDP_PANEL_ENTRY("SHP", 0x154c, &delay_200_500_p2e100, "LQ116M1JW10"),
+
+	{ /* sentinal */ }
+};
+
+static const struct edp_panel_entry *find_edp_panel(u32 panel_id)
+{
+	const struct edp_panel_entry *panel;
+
+	if (!panel_id)
+		return NULL;
+
+	for (panel = edp_panels; panel->panel_id; panel++)
+		if (panel->panel_id == panel_id)
+			return panel;
+
+	return NULL;
+}
+
+static int panel_edp_platform_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *id;
+
+	/* Skip one since "edp-panel" is only supported on DP AUX bus */
+	id = of_match_node(platform_of_match + 1, pdev->dev.of_node);
+	if (!id)
+		return -ENODEV;
+
+	return panel_edp_probe(&pdev->dev, id->data, NULL);
+}
+
+static int panel_edp_platform_remove(struct platform_device *pdev)
+{
+	return panel_edp_remove(&pdev->dev);
+}
+
+static void panel_edp_platform_shutdown(struct platform_device *pdev)
+{
+	panel_edp_shutdown(&pdev->dev);
+}
+
+static const struct dev_pm_ops panel_edp_pm_ops = {
+	SET_RUNTIME_PM_OPS(panel_edp_suspend, panel_edp_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+};
+
+static struct platform_driver panel_edp_platform_driver = {
+	.driver = {
+		.name = "panel-edp",
+		.of_match_table = platform_of_match,
+		.pm = &panel_edp_pm_ops,
+	},
+	.probe = panel_edp_platform_probe,
+	.remove = panel_edp_platform_remove,
+	.shutdown = panel_edp_platform_shutdown,
+};
+
+static int panel_edp_dp_aux_ep_probe(struct dp_aux_ep_device *aux_ep)
+{
+	const struct of_device_id *id;
+
+	id = of_match_node(platform_of_match, aux_ep->dev.of_node);
+	if (!id)
+		return -ENODEV;
+
+	return panel_edp_probe(&aux_ep->dev, id->data, aux_ep->aux);
+}
+
+static void panel_edp_dp_aux_ep_remove(struct dp_aux_ep_device *aux_ep)
+{
+	panel_edp_remove(&aux_ep->dev);
+}
+
+static void panel_edp_dp_aux_ep_shutdown(struct dp_aux_ep_device *aux_ep)
+{
+	panel_edp_shutdown(&aux_ep->dev);
+}
+
+static struct dp_aux_ep_driver panel_edp_dp_aux_ep_driver = {
+	.driver = {
+		.name = "panel-simple-dp-aux",
+		.of_match_table = platform_of_match,	/* Same as platform one! */
+		.pm = &panel_edp_pm_ops,
+	},
+	.probe = panel_edp_dp_aux_ep_probe,
+	.remove = panel_edp_dp_aux_ep_remove,
+	.shutdown = panel_edp_dp_aux_ep_shutdown,
+};
+
+static int __init panel_edp_init(void)
+{
+	int err;
+
+	err = platform_driver_register(&panel_edp_platform_driver);
+	if (err < 0)
+		return err;
+
+	err = dp_aux_dp_driver_register(&panel_edp_dp_aux_ep_driver);
+	if (err < 0)
+		goto err_did_platform_register;
+
+	return 0;
+
+err_did_platform_register:
+	platform_driver_unregister(&panel_edp_platform_driver);
+
+	return err;
+}
+module_init(panel_edp_init);
+
+static void __exit panel_edp_exit(void)
+{
+	dp_aux_dp_driver_unregister(&panel_edp_dp_aux_ep_driver);
+	platform_driver_unregister(&panel_edp_platform_driver);
+}
+module_exit(panel_edp_exit);
+
+MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
+MODULE_DESCRIPTION("DRM Driver for Simple eDP Panels");
+MODULE_LICENSE("GPL and additional rights");

drivers/gpu/drm/panel/panel-simple.c

@@ -23,7 +23,6 @@
 
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
-#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
@@ -36,8 +35,6 @@
 
 #include <drm/drm_crtc.h>
 #include <drm/drm_device.h>
-#include <drm/drm_dp_aux_bus.h>
-#include <drm/drm_dp_helper.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_panel.h>
 
@@ -94,44 +91,6 @@ struct panel_desc {
 		 */
 		unsigned int prepare;
 
-		/**
-		 * @delay.hpd_absent_delay: Time to wait if HPD isn't hooked up.
-		 *
-		 * Add this to the prepare delay if we know Hot Plug Detect
-		 * isn't used.
-		 */
-		unsigned int hpd_absent_delay;
-
-		/**
-		 * @delay.prepare_to_enable: Time between prepare and enable.
-		 *
-		 * The minimum time, in milliseconds, that needs to have passed
-		 * between when prepare finished and enable may begin. If at
-		 * enable time less time has passed since prepare finished,
-		 * the driver waits for the remaining time.
-		 *
-		 * If a fixed enable delay is also specified, we'll start
-		 * counting before delaying for the fixed delay.
-		 *
-		 * If a fixed prepare delay is also specified, we won't start
-		 * counting until after the fixed delay. We can't overlap this
-		 * fixed delay with the min time because the fixed delay
-		 * doesn't happen at the end of the function if a HPD GPIO was
-		 * specified.
-		 *
-		 * In other words:
-		 *   prepare()
-		 *     ...
-		 *     // do fixed prepare delay
-		 *     // wait for HPD GPIO if applicable
-		 *     // start counting for prepare_to_enable
-		 *
-		 *   enable()
-		 *     // do fixed enable delay
-		 *     // enforce prepare_to_enable min time
-		 */
-		unsigned int prepare_to_enable;
-
 		/**
 		 * @delay.enable: Time for the panel to display a valid frame.
 		 *
@@ -176,7 +135,6 @@ struct panel_desc {
 struct panel_simple {
 	struct drm_panel base;
 	bool enabled;
-	bool no_hpd;
 
 	bool prepared;
 
@@ -187,10 +145,8 @@ struct panel_simple {
 
 	struct regulator *supply;
 	struct i2c_adapter *ddc;
-	struct drm_dp_aux *aux;
 
 	struct gpio_desc *enable_gpio;
-	struct gpio_desc *hpd_gpio;
 
 	struct edid *edid;
 
@@ -374,30 +330,10 @@ static int panel_simple_unprepare(struct drm_panel *panel)
 	return 0;
 }
 
-static int panel_simple_get_hpd_gpio(struct device *dev, struct panel_simple *p)
-{
-	int err;
-
-	p->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
-	if (IS_ERR(p->hpd_gpio)) {
-		err = PTR_ERR(p->hpd_gpio);
-
-		if (err != -EPROBE_DEFER)
-			dev_err(dev, "failed to get 'hpd' GPIO: %d\n", err);
-
-		return err;
-	}
-
-	return 0;
-}
-
-static int panel_simple_prepare_once(struct panel_simple *p)
+static int panel_simple_resume(struct device *dev)
 {
-	struct device *dev = p->base.dev;
-	unsigned int delay;
+	struct panel_simple *p = dev_get_drvdata(dev);
 	int err;
-	int hpd_asserted;
-	unsigned long hpd_wait_us;
 
 	panel_simple_wait(p->unprepared_time, p->desc->delay.unprepare);
 
@@ -409,68 +345,12 @@ static int panel_simple_prepare_once(struct panel_simple *p)
 
 	gpiod_set_value_cansleep(p->enable_gpio, 1);
 
-	delay = p->desc->delay.prepare;
-	if (p->no_hpd)
-		delay += p->desc->delay.hpd_absent_delay;
-	if (delay)
-		msleep(delay);
-
-	if (p->hpd_gpio) {
-		if (p->desc->delay.hpd_absent_delay)
-			hpd_wait_us = p->desc->delay.hpd_absent_delay * 1000UL;
-		else
-			hpd_wait_us = 2000000;
-
-		err = readx_poll_timeout(gpiod_get_value_cansleep, p->hpd_gpio,
-					 hpd_asserted, hpd_asserted,
-					 1000, hpd_wait_us);
-		if (hpd_asserted < 0)
-			err = hpd_asserted;
-
-		if (err) {
-			if (err != -ETIMEDOUT)
-				dev_err(dev,
-					"error waiting for hpd GPIO: %d\n", err);
-			goto error;
-		}
-	}
+	if (p->desc->delay.prepare)
+		msleep(p->desc->delay.prepare);
 
 	p->prepared_time = ktime_get();
 
 	return 0;
-
-error:
-	gpiod_set_value_cansleep(p->enable_gpio, 0);
-	regulator_disable(p->supply);
-	p->unprepared_time = ktime_get();
-
-	return err;
-}
-
-/*
- * Some panels simply don't always come up and need to be power cycled to
- * work properly.  We'll allow for a handful of retries.
- */
-#define MAX_PANEL_PREPARE_TRIES		5
-
-static int panel_simple_resume(struct device *dev)
-{
-	struct panel_simple *p = dev_get_drvdata(dev);
-	int ret;
-	int try;
-
-	for (try = 0; try < MAX_PANEL_PREPARE_TRIES; try++) {
-		ret = panel_simple_prepare_once(p);
-		if (ret != -ETIMEDOUT)
-			break;
-	}
-
-	if (ret == -ETIMEDOUT)
-		dev_err(dev, "Prepare timeout after %d tries\n", try);
-	else if (try)
-		dev_warn(dev, "Prepare needed %d retries\n", try);
-
-	return ret;
 }
 
 static int panel_simple_prepare(struct drm_panel *panel)
@@ -503,8 +383,6 @@ static int panel_simple_enable(struct drm_panel *panel)
 	if (p->desc->delay.enable)
 		msleep(p->desc->delay.enable);
 
-	panel_simple_wait(p->prepared_time, p->desc->delay.prepare_to_enable);
-
 	p->enabled = true;
 
 	return 0;
@@ -660,8 +538,7 @@ static void panel_simple_parse_panel_timing_node(struct device *dev,
 		dev_err(dev, "Reject override mode: No display_timing found\n");
 }
 
-static int panel_simple_probe(struct device *dev, const struct panel_desc *desc,
-			      struct drm_dp_aux *aux)
+static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
 {
 	struct panel_simple *panel;
 	struct display_timing dt;
@@ -677,14 +554,6 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc,
 	panel->enabled = false;
 	panel->prepared_time = 0;
 	panel->desc = desc;
-	panel->aux = aux;
-
-	panel->no_hpd = of_property_read_bool(dev->of_node, "no-hpd");
-	if (!panel->no_hpd) {
-		err = panel_simple_get_hpd_gpio(dev, panel);
-		if (err)
-			return err;
-	}
 
 	panel->supply = devm_regulator_get(dev, "power");
 	if (IS_ERR(panel->supply))
@@ -712,8 +581,6 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc,
 
 		if (!panel->ddc)
 			return -EPROBE_DEFER;
-	} else if (aux) {
-		panel->ddc = &aux->ddc;
 	}
 
 	if (desc == &panel_dpi) {
@@ -749,9 +616,9 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc,
 			desc->bpc != 8);
 		break;
 	case DRM_MODE_CONNECTOR_eDP:
-		if (desc->bpc != 6 && desc->bpc != 8 && desc->bpc != 10)
-			dev_warn(dev, "Expected bpc in {6,8,10} but got: %u\n", desc->bpc);
-		break;
+		dev_warn(dev, "eDP panels moved to panel-edp\n");
+		err = -EINVAL;
+		goto free_ddc;
 	case DRM_MODE_CONNECTOR_DSI:
 		if (desc->bpc != 6 && desc->bpc != 8)
 			dev_warn(dev, "Expected bpc in {6,8} but got: %u\n", desc->bpc);
@@ -798,15 +665,6 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc,
 	if (err)
 		goto disable_pm_runtime;
 
-	if (!panel->base.backlight && panel->aux) {
-		pm_runtime_get_sync(dev);
-		err = drm_panel_dp_aux_backlight(&panel->base, panel->aux);
-		pm_runtime_mark_last_busy(dev);
-		pm_runtime_put_autosuspend(dev);
-		if (err)
-			goto disable_pm_runtime;
-	}
-
 	drm_panel_add(&panel->base);
 
 	return 0;
@@ -815,7 +673,7 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc,
 	pm_runtime_dont_use_autosuspend(dev);
 	pm_runtime_disable(dev);
 free_ddc:
-	if (panel->ddc && (!panel->aux || panel->ddc != &panel->aux->ddc))
+	if (panel->ddc)
 		put_device(&panel->ddc->dev);
 
 	return err;
@@ -831,7 +689,7 @@ static int panel_simple_remove(struct device *dev)
 
 	pm_runtime_dont_use_autosuspend(dev);
 	pm_runtime_disable(dev);
-	if (panel->ddc && (!panel->aux || panel->ddc != &panel->aux->ddc))
+	if (panel->ddc)
 		put_device(&panel->ddc->dev);
 
 	return 0;
@@ -970,28 +828,6 @@ static const struct panel_desc auo_b101aw03 = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
-static const struct display_timing auo_b101ean01_timing = {
-	.pixelclock = { 65300000, 72500000, 75000000 },
-	.hactive = { 1280, 1280, 1280 },
-	.hfront_porch = { 18, 119, 119 },
-	.hback_porch = { 21, 21, 21 },
-	.hsync_len = { 32, 32, 32 },
-	.vactive = { 800, 800, 800 },
-	.vfront_porch = { 4, 4, 4 },
-	.vback_porch = { 8, 8, 8 },
-	.vsync_len = { 18, 20, 20 },
-};
-
-static const struct panel_desc auo_b101ean01 = {
-	.timings = &auo_b101ean01_timing,
-	.num_timings = 1,
-	.bpc = 6,
-	.size = {
-		.width = 217,
-		.height = 136,
-	},
-};
-
 static const struct drm_display_mode auo_b101xtn01_mode = {
 	.clock = 72000,
 	.hdisplay = 1366,
@@ -1015,172 +851,6 @@ static const struct panel_desc auo_b101xtn01 = {
 	},
 };
 
-static const struct drm_display_mode auo_b116xak01_mode = {
-	.clock = 69300,
-	.hdisplay = 1366,
-	.hsync_start = 1366 + 48,
-	.hsync_end = 1366 + 48 + 32,
-	.htotal = 1366 + 48 + 32 + 10,
-	.vdisplay = 768,
-	.vsync_start = 768 + 4,
-	.vsync_end = 768 + 4 + 6,
-	.vtotal = 768 + 4 + 6 + 15,
-	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
-};
-
-static const struct panel_desc auo_b116xak01 = {
-	.modes = &auo_b116xak01_mode,
-	.num_modes = 1,
-	.bpc = 6,
-	.size = {
-		.width = 256,
-		.height = 144,
-	},
-	.delay = {
-		.hpd_absent_delay = 200,
-	},
-	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
-static const struct drm_display_mode auo_b116xw03_mode = {
-	.clock = 70589,
-	.hdisplay = 1366,
-	.hsync_start = 1366 + 40,
-	.hsync_end = 1366 + 40 + 40,
-	.htotal = 1366 + 40 + 40 + 32,
-	.vdisplay = 768,
-	.vsync_start = 768 + 10,
-	.vsync_end = 768 + 10 + 12,
-	.vtotal = 768 + 10 + 12 + 6,
-	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
-};
-
-static const struct panel_desc auo_b116xw03 = {
-	.modes = &auo_b116xw03_mode,
-	.num_modes = 1,
-	.bpc = 6,
-	.size = {
-		.width = 256,
-		.height = 144,
-	},
-	.delay = {
-		.enable = 400,
-	},
-	.bus_flags = DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE,
-	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
-static const struct drm_display_mode auo_b133xtn01_mode = {
-	.clock = 69500,
-	.hdisplay = 1366,
-	.hsync_start = 1366 + 48,
-	.hsync_end = 1366 + 48 + 32,
-	.htotal = 1366 + 48 + 32 + 20,
-	.vdisplay = 768,
-	.vsync_start = 768 + 3,
-	.vsync_end = 768 + 3 + 6,
-	.vtotal = 768 + 3 + 6 + 13,
-};
-
-static const struct panel_desc auo_b133xtn01 = {
-	.modes = &auo_b133xtn01_mode,
-	.num_modes = 1,
-	.bpc = 6,
-	.size = {
-		.width = 293,
-		.height = 165,
-	},
-};
-
-static const struct drm_display_mode auo_b133han05_mode = {
-	.clock = 142600,
-	.hdisplay = 1920,
-	.hsync_start = 1920 + 58,
-	.hsync_end = 1920 + 58 + 42,
-	.htotal = 1920 + 58 + 42 + 60,
-	.vdisplay = 1080,
-	.vsync_start = 1080 + 3,
-	.vsync_end = 1080 + 3 + 5,
-	.vtotal = 1080 + 3 + 5 + 54,
-};
-
-static const struct panel_desc auo_b133han05 = {
-	.modes = &auo_b133han05_mode,
-	.num_modes = 1,
-	.bpc = 8,
-	.size = {
-		.width = 293,
-		.height = 165,
-	},
-	.delay = {
-		.prepare = 100,
-		.enable = 20,
-		.unprepare = 50,
-	},
-	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
-	.bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
-static const struct drm_display_mode auo_b133htn01_mode = {
-	.clock = 150660,
-	.hdisplay = 1920,
-	.hsync_start = 1920 + 172,
-	.hsync_end = 1920 + 172 + 80,
-	.htotal = 1920 + 172 + 80 + 60,
-	.vdisplay = 1080,
-	.vsync_start = 1080 + 25,
-	.vsync_end = 1080 + 25 + 10,
-	.vtotal = 1080 + 25 + 10 + 10,
-};
-
-static const struct panel_desc auo_b133htn01 = {
-	.modes = &auo_b133htn01_mode,
-	.num_modes = 1,
-	.bpc = 6,
-	.size = {
-		.width = 293,
-		.height = 165,
-	},
-	.delay = {
-		.prepare = 105,
-		.enable = 20,
-		.unprepare = 50,
-	},
-};
-
-static const struct drm_display_mode auo_b140han06_mode = {
-	.clock = 141000,
-	.hdisplay = 1920,
-	.hsync_start = 1920 + 16,
-	.hsync_end = 1920 + 16 + 16,
-	.htotal = 1920 + 16 + 16 + 152,
-	.vdisplay = 1080,
-	.vsync_start = 1080 + 3,
-	.vsync_end = 1080 + 3 + 14,
-	.vtotal = 1080 + 3 + 14 + 19,
-};
-
-static const struct panel_desc auo_b140han06 = {
-	.modes = &auo_b140han06_mode,
-	.num_modes = 1,
-	.bpc = 8,
-	.size = {
-		.width = 309,
-		.height = 174,
-	},
-	.delay = {
-		.prepare = 100,
-		.enable = 20,
-		.unprepare = 50,
-	},
-	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
-	.bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
 static const struct display_timing auo_g070vvn01_timings = {
 	.pixelclock = { 33300000, 34209000, 45000000 },
 	.hactive = { 800, 800, 800 },
@@ -1524,169 +1194,6 @@ static const struct panel_desc boe_hv070wsa = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
-static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
-	{
-		.clock = 71900,
-		.hdisplay = 1280,
-		.hsync_start = 1280 + 48,
-		.hsync_end = 1280 + 48 + 32,
-		.htotal = 1280 + 48 + 32 + 80,
-		.vdisplay = 800,
-		.vsync_start = 800 + 3,
-		.vsync_end = 800 + 3 + 5,
-		.vtotal = 800 + 3 + 5 + 24,
-	},
-	{
-		.clock = 57500,
-		.hdisplay = 1280,
-		.hsync_start = 1280 + 48,
-		.hsync_end = 1280 + 48 + 32,
-		.htotal = 1280 + 48 + 32 + 80,
-		.vdisplay = 800,
-		.vsync_start = 800 + 3,
-		.vsync_end = 800 + 3 + 5,
-		.vtotal = 800 + 3 + 5 + 24,
-	},
-};
-
-static const struct panel_desc boe_nv101wxmn51 = {
-	.modes = boe_nv101wxmn51_modes,
-	.num_modes = ARRAY_SIZE(boe_nv101wxmn51_modes),
-	.bpc = 8,
-	.size = {
-		.width = 217,
-		.height = 136,
-	},
-	.delay = {
-		.prepare = 210,
-		.enable = 50,
-		.unprepare = 160,
-	},
-};
-
-static const struct drm_display_mode boe_nv110wtm_n61_modes[] = {
-	{
-		.clock = 207800,
-		.hdisplay = 2160,
-		.hsync_start = 2160 + 48,
-		.hsync_end = 2160 + 48 + 32,
-		.htotal = 2160 + 48 + 32 + 100,
-		.vdisplay = 1440,
-		.vsync_start = 1440 + 3,
-		.vsync_end = 1440 + 3 + 6,
-		.vtotal = 1440 + 3 + 6 + 31,
-		.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
-	},
-	{
-		.clock = 138500,
-		.hdisplay = 2160,
-		.hsync_start = 2160 + 48,
-		.hsync_end = 2160 + 48 + 32,
-		.htotal = 2160 + 48 + 32 + 100,
-		.vdisplay = 1440,
-		.vsync_start = 1440 + 3,
-		.vsync_end = 1440 + 3 + 6,
-		.vtotal = 1440 + 3 + 6 + 31,
-		.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
-	},
-};
-
-static const struct panel_desc boe_nv110wtm_n61 = {
-	.modes = boe_nv110wtm_n61_modes,
-	.num_modes = ARRAY_SIZE(boe_nv110wtm_n61_modes),
-	.bpc = 8,
-	.size = {
-		.width = 233,
-		.height = 155,
-	},
-	.delay = {
-		.hpd_absent_delay = 200,
-		.prepare_to_enable = 80,
-		.enable = 50,
-		.unprepare = 500,
-	},
-	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
-	.bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
-/* Also used for boe_nv133fhm_n62 */
-static const struct drm_display_mode boe_nv133fhm_n61_modes = {
-	.clock = 147840,
-	.hdisplay = 1920,
-	.hsync_start = 1920 + 48,
-	.hsync_end = 1920 + 48 + 32,
-	.htotal = 1920 + 48 + 32 + 200,
-	.vdisplay = 1080,
-	.vsync_start = 1080 + 3,
-	.vsync_end = 1080 + 3 + 6,
-	.vtotal = 1080 + 3 + 6 + 31,
-	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
-};
-
-/* Also used for boe_nv133fhm_n62 */
-static const struct panel_desc boe_nv133fhm_n61 = {
-	.modes = &boe_nv133fhm_n61_modes,
-	.num_modes = 1,
-	.bpc = 6,
-	.size = {
-		.width = 294,
-		.height = 165,
-	},
-	.delay = {
-		/*
-		 * When power is first given to the panel there's a short
-		 * spike on the HPD line.  It was explained that this spike
-		 * was until the TCON data download was complete.  On
-		 * one system this was measured at 8 ms.  We'll put 15 ms
-		 * in the prepare delay just to be safe and take it away
-		 * from the hpd_absent_delay (which would otherwise be 200 ms)
-		 * to handle this.  That means:
-		 * - If HPD isn't hooked up you still have 200 ms delay.
-		 * - If HPD is hooked up we won't try to look at it for the
-		 *   first 15 ms.
-		 */
-		.prepare = 15,
-		.hpd_absent_delay = 185,
-
-		.unprepare = 500,
-	},
-	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
-	.bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
-static const struct drm_display_mode boe_nv140fhmn49_modes[] = {
-	{
-		.clock = 148500,
-		.hdisplay = 1920,
-		.hsync_start = 1920 + 48,
-		.hsync_end = 1920 + 48 + 32,
-		.htotal = 2200,
-		.vdisplay = 1080,
-		.vsync_start = 1080 + 3,
-		.vsync_end = 1080 + 3 + 5,
-		.vtotal = 1125,
-	},
-};
-
-static const struct panel_desc boe_nv140fhmn49 = {
-	.modes = boe_nv140fhmn49_modes,
-	.num_modes = ARRAY_SIZE(boe_nv140fhmn49_modes),
-	.bpc = 6,
-	.size = {
-		.width = 309,
-		.height = 174,
-	},
-	.delay = {
-		.prepare = 210,
-		.enable = 50,
-		.unprepare = 160,
-	},
-	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
 static const struct drm_display_mode cdtech_s043wq26h_ct7_mode = {
 	.clock = 9000,
 	.hdisplay = 480,
@@ -2609,96 +2116,6 @@ static const struct panel_desc innolux_g121x1_l03 = {
 	},
 };
 
-static const struct drm_display_mode innolux_n116bca_ea1_mode = {
-	.clock = 76420,
-	.hdisplay = 1366,
-	.hsync_start = 1366 + 136,
-	.hsync_end = 1366 + 136 + 30,
-	.htotal = 1366 + 136 + 30 + 60,
-	.vdisplay = 768,
-	.vsync_start = 768 + 8,
-	.vsync_end = 768 + 8 + 12,
-	.vtotal = 768 + 8 + 12 + 12,
-	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
-};
-
-static const struct panel_desc innolux_n116bca_ea1 = {
-	.modes = &innolux_n116bca_ea1_mode,
-	.num_modes = 1,
-	.bpc = 6,
-	.size = {
-		.width = 256,
-		.height = 144,
-	},
-	.delay = {
-		.hpd_absent_delay = 200,
-		.prepare_to_enable = 80,
-		.unprepare = 500,
-	},
-	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
-/*
- * Datasheet specifies that at 60 Hz refresh rate:
- * - total horizontal time: { 1506, 1592, 1716 }
- * - total vertical time: { 788, 800, 868 }
- *
- * ...but doesn't go into exactly how that should be split into a front
- * porch, back porch, or sync length.  For now we'll leave a single setting
- * here which allows a bit of tweaking of the pixel clock at the expense of
- * refresh rate.
- */
-static const struct display_timing innolux_n116bge_timing = {
-	.pixelclock = { 72600000, 76420000, 80240000 },
-	.hactive = { 1366, 1366, 1366 },
-	.hfront_porch = { 136, 136, 136 },
-	.hback_porch = { 60, 60, 60 },
-	.hsync_len = { 30, 30, 30 },
-	.vactive = { 768, 768, 768 },
-	.vfront_porch = { 8, 8, 8 },
-	.vback_porch = { 12, 12, 12 },
-	.vsync_len = { 12, 12, 12 },
-	.flags = DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_HSYNC_LOW,
-};
-
-static const struct panel_desc innolux_n116bge = {
-	.timings = &innolux_n116bge_timing,
-	.num_timings = 1,
-	.bpc = 6,
-	.size = {
-		.width = 256,
-		.height = 144,
-	},
-	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
-static const struct drm_display_mode innolux_n125hce_gn1_mode = {
-	.clock = 162000,
-	.hdisplay = 1920,
-	.hsync_start = 1920 + 40,
-	.hsync_end = 1920 + 40 + 40,
-	.htotal = 1920 + 40 + 40 + 80,
-	.vdisplay = 1080,
-	.vsync_start = 1080 + 4,
-	.vsync_end = 1080 + 4 + 4,
-	.vtotal = 1080 + 4 + 4 + 24,
-};
-
-static const struct panel_desc innolux_n125hce_gn1 = {
-	.modes = &innolux_n125hce_gn1_mode,
-	.num_modes = 1,
-	.bpc = 8,
-	.size = {
-		.width = 276,
-		.height = 155,
-	},
-	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
-	.bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
 static const struct drm_display_mode innolux_n156bge_l21_mode = {
 	.clock = 69300,
 	.hdisplay = 1366,
@@ -2724,33 +2141,6 @@ static const struct panel_desc innolux_n156bge_l21 = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
-static const struct drm_display_mode innolux_p120zdg_bf1_mode = {
-	.clock = 206016,
-	.hdisplay = 2160,
-	.hsync_start = 2160 + 48,
-	.hsync_end = 2160 + 48 + 32,
-	.htotal = 2160 + 48 + 32 + 80,
-	.vdisplay = 1440,
-	.vsync_start = 1440 + 3,
-	.vsync_end = 1440 + 3 + 10,
-	.vtotal = 1440 + 3 + 10 + 27,
-	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
-};
-
-static const struct panel_desc innolux_p120zdg_bf1 = {
-	.modes = &innolux_p120zdg_bf1_mode,
-	.num_modes = 1,
-	.bpc = 8,
-	.size = {
-		.width = 254,
-		.height = 169,
-	},
-	.delay = {
-		.hpd_absent_delay = 200,
-		.unprepare = 500,
-	},
-};
-
 static const struct drm_display_mode innolux_zj070na_01p_mode = {
 	.clock = 51501,
 	.hdisplay = 1024,
@@ -2773,64 +2163,6 @@ static const struct panel_desc innolux_zj070na_01p = {
 	},
 };
 
-static const struct drm_display_mode ivo_m133nwf4_r0_mode = {
-	.clock = 138778,
-	.hdisplay = 1920,
-	.hsync_start = 1920 + 24,
-	.hsync_end = 1920 + 24 + 48,
-	.htotal = 1920 + 24 + 48 + 88,
-	.vdisplay = 1080,
-	.vsync_start = 1080 + 3,
-	.vsync_end = 1080 + 3 + 12,
-	.vtotal = 1080 + 3 + 12 + 17,
-	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
-};
-
-static const struct panel_desc ivo_m133nwf4_r0 = {
-	.modes = &ivo_m133nwf4_r0_mode,
-	.num_modes = 1,
-	.bpc = 8,
-	.size = {
-		.width = 294,
-		.height = 165,
-	},
-	.delay = {
-		.hpd_absent_delay = 200,
-		.unprepare = 500,
-	},
-	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
-	.bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
-static const struct drm_display_mode kingdisplay_kd116n21_30nv_a010_mode = {
-	.clock = 81000,
-	.hdisplay = 1366,
-	.hsync_start = 1366 + 40,
-	.hsync_end = 1366 + 40 + 32,
-	.htotal = 1366 + 40 + 32 + 62,
-	.vdisplay = 768,
-	.vsync_start = 768 + 5,
-	.vsync_end = 768 + 5 + 5,
-	.vtotal = 768 + 5 + 5 + 122,
-	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
-};
-
-static const struct panel_desc kingdisplay_kd116n21_30nv_a010 = {
-	.modes = &kingdisplay_kd116n21_30nv_a010_mode,
-	.num_modes = 1,
-	.bpc = 6,
-	.size = {
-		.width = 256,
-		.height = 144,
-	},
-	.delay = {
-		.hpd_absent_delay = 200,
-	},
-	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
 static const struct display_timing koe_tx14d24vm1bpa_timing = {
 	.pixelclock = { 5580000, 5850000, 6200000 },
 	.hactive = { 320, 320, 320 },
@@ -2982,94 +2314,6 @@ static const struct panel_desc lg_lb070wv8 = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
-static const struct drm_display_mode lg_lp079qx1_sp0v_mode = {
-	.clock = 200000,
-	.hdisplay = 1536,
-	.hsync_start = 1536 + 12,
-	.hsync_end = 1536 + 12 + 16,
-	.htotal = 1536 + 12 + 16 + 48,
-	.vdisplay = 2048,
-	.vsync_start = 2048 + 8,
-	.vsync_end = 2048 + 8 + 4,
-	.vtotal = 2048 + 8 + 4 + 8,
-	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
-};
-
-static const struct panel_desc lg_lp079qx1_sp0v = {
-	.modes = &lg_lp079qx1_sp0v_mode,
-	.num_modes = 1,
-	.size = {
-		.width = 129,
-		.height = 171,
-	},
-};
-
-static const struct drm_display_mode lg_lp097qx1_spa1_mode = {
-	.clock = 205210,
-	.hdisplay = 2048,
-	.hsync_start = 2048 + 150,
-	.hsync_end = 2048 + 150 + 5,
-	.htotal = 2048 + 150 + 5 + 5,
-	.vdisplay = 1536,
-	.vsync_start = 1536 + 3,
-	.vsync_end = 1536 + 3 + 1,
-	.vtotal = 1536 + 3 + 1 + 9,
-};
-
-static const struct panel_desc lg_lp097qx1_spa1 = {
-	.modes = &lg_lp097qx1_spa1_mode,
-	.num_modes = 1,
-	.size = {
-		.width = 208,
-		.height = 147,
-	},
-};
-
-static const struct drm_display_mode lg_lp120up1_mode = {
-	.clock = 162300,
-	.hdisplay = 1920,
-	.hsync_start = 1920 + 40,
-	.hsync_end = 1920 + 40 + 40,
-	.htotal = 1920 + 40 + 40+ 80,
-	.vdisplay = 1280,
-	.vsync_start = 1280 + 4,
-	.vsync_end = 1280 + 4 + 4,
-	.vtotal = 1280 + 4 + 4 + 12,
-};
-
-static const struct panel_desc lg_lp120up1 = {
-	.modes = &lg_lp120up1_mode,
-	.num_modes = 1,
-	.bpc = 8,
-	.size = {
-		.width = 267,
-		.height = 183,
-	},
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
-static const struct drm_display_mode lg_lp129qe_mode = {
-	.clock = 285250,
-	.hdisplay = 2560,
-	.hsync_start = 2560 + 48,
-	.hsync_end = 2560 + 48 + 32,
-	.htotal = 2560 + 48 + 32 + 80,
-	.vdisplay = 1700,
-	.vsync_start = 1700 + 3,
-	.vsync_end = 1700 + 3 + 10,
-	.vtotal = 1700 + 3 + 10 + 36,
-};
-
-static const struct panel_desc lg_lp129qe = {
-	.modes = &lg_lp129qe_mode,
-	.num_modes = 1,
-	.bpc = 8,
-	.size = {
-		.width = 272,
-		.height = 181,
-	},
-};
-
 static const struct display_timing logictechno_lt161010_2nh_timing = {
 	.pixelclock = { 26400000, 33300000, 46800000 },
 	.hactive = { 800, 800, 800 },
@@ -3330,49 +2574,6 @@ static const struct panel_desc netron_dy_e231732 = {
 	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
 };
 
-static const struct drm_display_mode neweast_wjfh116008a_modes[] = {
-	{
-		.clock = 138500,
-		.hdisplay = 1920,
-		.hsync_start = 1920 + 48,
-		.hsync_end = 1920 + 48 + 32,
-		.htotal = 1920 + 48 + 32 + 80,
-		.vdisplay = 1080,
-		.vsync_start = 1080 + 3,
-		.vsync_end = 1080 + 3 + 5,
-		.vtotal = 1080 + 3 + 5 + 23,
-		.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
-	}, {
-		.clock = 110920,
-		.hdisplay = 1920,
-		.hsync_start = 1920 + 48,
-		.hsync_end = 1920 + 48 + 32,
-		.htotal = 1920 + 48 + 32 + 80,
-		.vdisplay = 1080,
-		.vsync_start = 1080 + 3,
-		.vsync_end = 1080 + 3 + 5,
-		.vtotal = 1080 + 3 + 5 + 23,
-		.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
-	}
-};
-
-static const struct panel_desc neweast_wjfh116008a = {
-	.modes = neweast_wjfh116008a_modes,
-	.num_modes = 2,
-	.bpc = 6,
-	.size = {
-		.width = 260,
-		.height = 150,
-	},
-	.delay = {
-		.prepare = 110,
-		.enable = 20,
-		.unprepare = 500,
-	},
-	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
 static const struct drm_display_mode newhaven_nhd_43_480272ef_atxl_mode = {
 	.clock = 9000,
 	.hdisplay = 480,
@@ -3783,27 +2984,6 @@ static const struct panel_desc rocktech_rk101ii01d_ct = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
-static const struct drm_display_mode samsung_lsn122dl01_c01_mode = {
-	.clock = 271560,
-	.hdisplay = 2560,
-	.hsync_start = 2560 + 48,
-	.hsync_end = 2560 + 48 + 32,
-	.htotal = 2560 + 48 + 32 + 80,
-	.vdisplay = 1600,
-	.vsync_start = 1600 + 2,
-	.vsync_end = 1600 + 2 + 5,
-	.vtotal = 1600 + 2 + 5 + 57,
-};
-
-static const struct panel_desc samsung_lsn122dl01_c01 = {
-	.modes = &samsung_lsn122dl01_c01_mode,
-	.num_modes = 1,
-	.size = {
-		.width = 263,
-		.height = 164,
-	},
-};
-
 static const struct drm_display_mode samsung_ltn101nt05_mode = {
 	.clock = 54030,
 	.hdisplay = 1024,
@@ -3829,28 +3009,6 @@ static const struct panel_desc samsung_ltn101nt05 = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
-static const struct drm_display_mode samsung_ltn140at29_301_mode = {
-	.clock = 76300,
-	.hdisplay = 1366,
-	.hsync_start = 1366 + 64,
-	.hsync_end = 1366 + 64 + 48,
-	.htotal = 1366 + 64 + 48 + 128,
-	.vdisplay = 768,
-	.vsync_start = 768 + 2,
-	.vsync_end = 768 + 2 + 5,
-	.vtotal = 768 + 2 + 5 + 17,
-};
-
-static const struct panel_desc samsung_ltn140at29_301 = {
-	.modes = &samsung_ltn140at29_301_mode,
-	.num_modes = 1,
-	.bpc = 6,
-	.size = {
-		.width = 320,
-		.height = 187,
-	},
-};
-
 static const struct display_timing satoz_sat050at40h12r2_timing = {
 	.pixelclock = {33300000, 33300000, 50000000},
 	.hactive = {800, 800, 800},
@@ -3875,31 +3033,6 @@ static const struct panel_desc satoz_sat050at40h12r2 = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
-static const struct drm_display_mode sharp_ld_d5116z01b_mode = {
-	.clock = 168480,
-	.hdisplay = 1920,
-	.hsync_start = 1920 + 48,
-	.hsync_end = 1920 + 48 + 32,
-	.htotal = 1920 + 48 + 32 + 80,
-	.vdisplay = 1280,
-	.vsync_start = 1280 + 3,
-	.vsync_end = 1280 + 3 + 10,
-	.vtotal = 1280 + 3 + 10 + 57,
-	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
-};
-
-static const struct panel_desc sharp_ld_d5116z01b = {
-	.modes = &sharp_ld_d5116z01b_mode,
-	.num_modes = 1,
-	.bpc = 8,
-	.size = {
-		.width = 260,
-		.height = 120,
-	},
-	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
-	.bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
-};
-
 static const struct drm_display_mode sharp_lq070y3dg3b_mode = {
 	.clock = 33260,
 	.hdisplay = 800,
@@ -3974,34 +3107,6 @@ static const struct panel_desc sharp_lq101k1ly04 = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
-static const struct display_timing sharp_lq123p1jx31_timing = {
-	.pixelclock = { 252750000, 252750000, 266604720 },
-	.hactive = { 2400, 2400, 2400 },
-	.hfront_porch = { 48, 48, 48 },
-	.hback_porch = { 80, 80, 84 },
-	.hsync_len = { 32, 32, 32 },
-	.vactive = { 1600, 1600, 1600 },
-	.vfront_porch = { 3, 3, 3 },
-	.vback_porch = { 33, 33, 120 },
-	.vsync_len = { 10, 10, 10 },
-	.flags = DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_HSYNC_LOW,
-};
-
-static const struct panel_desc sharp_lq123p1jx31 = {
-	.timings = &sharp_lq123p1jx31_timing,
-	.num_timings = 1,
-	.bpc = 8,
-	.size = {
-		.width = 259,
-		.height = 173,
-	},
-	.delay = {
-		.prepare = 110,
-		.enable = 50,
-		.unprepare = 550,
-	},
-};
-
 static const struct drm_display_mode sharp_ls020b1dd01d_modes[] = {
 	{ /* 50 Hz */
 		.clock = 3000,
@@ -4090,33 +3195,6 @@ static const struct panel_desc starry_kr070pe2t = {
 	.connector_type = DRM_MODE_CONNECTOR_DPI,
 };
 
-static const struct drm_display_mode starry_kr122ea0sra_mode = {
-	.clock = 147000,
-	.hdisplay = 1920,
-	.hsync_start = 1920 + 16,
-	.hsync_end = 1920 + 16 + 16,
-	.htotal = 1920 + 16 + 16 + 32,
-	.vdisplay = 1200,
-	.vsync_start = 1200 + 15,
-	.vsync_end = 1200 + 15 + 2,
-	.vtotal = 1200 + 15 + 2 + 18,
-	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
-};
-
-static const struct panel_desc starry_kr122ea0sra = {
-	.modes = &starry_kr122ea0sra_mode,
-	.num_modes = 1,
-	.size = {
-		.width = 263,
-		.height = 164,
-	},
-	.delay = {
-		.prepare = 10 + 200,
-		.enable = 50,
-		.unprepare = 10 + 500,
-	},
-};
-
 static const struct drm_display_mode tfc_s9700rtwv43tr_01b_mode = {
 	.clock = 30000,
 	.hdisplay = 800,
@@ -4483,30 +3561,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "auo,b101aw03",
 		.data = &auo_b101aw03,
-	}, {
-		.compatible = "auo,b101ean01",
-		.data = &auo_b101ean01,
 	}, {
 		.compatible = "auo,b101xtn01",
 		.data = &auo_b101xtn01,
-	}, {
-		.compatible = "auo,b116xa01",
-		.data = &auo_b116xak01,
-	}, {
-		.compatible = "auo,b116xw03",
-		.data = &auo_b116xw03,
-	}, {
-		.compatible = "auo,b133han05",
-		.data = &auo_b133han05,
-	}, {
-		.compatible = "auo,b133htn01",
-		.data = &auo_b133htn01,
-	}, {
-		.compatible = "auo,b140han06",
-		.data = &auo_b140han06,
-	}, {
-		.compatible = "auo,b133xtn01",
-		.data = &auo_b133xtn01,
 	}, {
 		.compatible = "auo,g070vvn01",
 		.data = &auo_g070vvn01,
@@ -4546,21 +3603,6 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "boe,hv070wsa-100",
 		.data = &boe_hv070wsa
-	}, {
-		.compatible = "boe,nv101wxmn51",
-		.data = &boe_nv101wxmn51,
-	}, {
-		.compatible = "boe,nv110wtm-n61",
-		.data = &boe_nv110wtm_n61,
-	}, {
-		.compatible = "boe,nv133fhm-n61",
-		.data = &boe_nv133fhm_n61,
-	}, {
-		.compatible = "boe,nv133fhm-n62",
-		.data = &boe_nv133fhm_n61,
-	}, {
-		.compatible = "boe,nv140fhmn49",
-		.data = &boe_nv140fhmn49,
 	}, {
 		.compatible = "cdtech,s043wq26h-ct7",
 		.data = &cdtech_s043wq26h_ct7,
@@ -4672,30 +3714,12 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "innolux,g121x1-l03",
 		.data = &innolux_g121x1_l03,
-	}, {
-		.compatible = "innolux,n116bca-ea1",
-		.data = &innolux_n116bca_ea1,
-	}, {
-		.compatible = "innolux,n116bge",
-		.data = &innolux_n116bge,
-	}, {
-		.compatible = "innolux,n125hce-gn1",
-		.data = &innolux_n125hce_gn1,
 	}, {
 		.compatible = "innolux,n156bge-l21",
 		.data = &innolux_n156bge_l21,
-	}, {
-		.compatible = "innolux,p120zdg-bf1",
-		.data = &innolux_p120zdg_bf1,
 	}, {
 		.compatible = "innolux,zj070na-01p",
 		.data = &innolux_zj070na_01p,
-	}, {
-		.compatible = "ivo,m133nwf4-r0",
-		.data = &ivo_m133nwf4_r0,
-	}, {
-		.compatible = "kingdisplay,kd116n21-30nv-a010",
-		.data = &kingdisplay_kd116n21_30nv_a010,
 	}, {
 		.compatible = "koe,tx14d24vm1bpa",
 		.data = &koe_tx14d24vm1bpa,
@@ -4714,18 +3738,6 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "lg,lb070wv8",
 		.data = &lg_lb070wv8,
-	}, {
-		.compatible = "lg,lp079qx1-sp0v",
-		.data = &lg_lp079qx1_sp0v,
-	}, {
-		.compatible = "lg,lp097qx1-spa1",
-		.data = &lg_lp097qx1_spa1,
-	}, {
-		.compatible = "lg,lp120up1",
-		.data = &lg_lp120up1,
-	}, {
-		.compatible = "lg,lp129qe",
-		.data = &lg_lp129qe,
 	}, {
 		.compatible = "logicpd,type28",
 		.data = &logicpd_type_28,
@@ -4756,9 +3768,6 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "netron-dy,e231732",
 		.data = &netron_dy_e231732,
-	}, {
-		.compatible = "neweast,wjfh116008a",
-		.data = &neweast_wjfh116008a,
 	}, {
 		.compatible = "newhaven,nhd-4.3-480272ef-atxl",
 		.data = &newhaven_nhd_43_480272ef_atxl,
@@ -4807,21 +3816,12 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "rocktech,rk101ii01d-ct",
 		.data = &rocktech_rk101ii01d_ct,
-	}, {
-		.compatible = "samsung,lsn122dl01-c01",
-		.data = &samsung_lsn122dl01_c01,
 	}, {
 		.compatible = "samsung,ltn101nt05",
 		.data = &samsung_ltn101nt05,
-	}, {
-		.compatible = "samsung,ltn140at29-301",
-		.data = &samsung_ltn140at29_301,
 	}, {
 		.compatible = "satoz,sat050at40h12r2",
 		.data = &satoz_sat050at40h12r2,
-	}, {
-		.compatible = "sharp,ld-d5116z01b",
-		.data = &sharp_ld_d5116z01b,
 	}, {
 		.compatible = "sharp,lq035q7db03",
 		.data = &sharp_lq035q7db03,
@@ -4831,9 +3831,6 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "sharp,lq101k1ly04",
 		.data = &sharp_lq101k1ly04,
-	}, {
-		.compatible = "sharp,lq123p1jx31",
-		.data = &sharp_lq123p1jx31,
 	}, {
 		.compatible = "sharp,ls020b1dd01d",
 		.data = &sharp_ls020b1dd01d,
@@ -4843,9 +3840,6 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "starry,kr070pe2t",
 		.data = &starry_kr070pe2t,
-	}, {
-		.compatible = "starry,kr122ea0sra",
-		.data = &starry_kr122ea0sra,
 	}, {
 		.compatible = "tfc,s9700rtwv43tr-01b",
 		.data = &tfc_s9700rtwv43tr_01b,
@@ -4918,7 +3912,7 @@ static int panel_simple_platform_probe(struct platform_device *pdev)
 	if (!id)
 		return -ENODEV;
 
-	return panel_simple_probe(&pdev->dev, id->data, NULL);
+	return panel_simple_probe(&pdev->dev, id->data);
 }
 
 static int panel_simple_platform_remove(struct platform_device *pdev)
@@ -5198,7 +4192,7 @@ static int panel_simple_dsi_probe(struct mipi_dsi_device *dsi)
 
 	desc = id->data;
 
-	err = panel_simple_probe(&dsi->dev, &desc->desc, NULL);
+	err = panel_simple_probe(&dsi->dev, &desc->desc);
 	if (err < 0)
 		return err;
 
@@ -5243,38 +4237,6 @@ static struct mipi_dsi_driver panel_simple_dsi_driver = {
 	.shutdown = panel_simple_dsi_shutdown,
 };
 
-static int panel_simple_dp_aux_ep_probe(struct dp_aux_ep_device *aux_ep)
-{
-	const struct of_device_id *id;
-
-	id = of_match_node(platform_of_match, aux_ep->dev.of_node);
-	if (!id)
-		return -ENODEV;
-
-	return panel_simple_probe(&aux_ep->dev, id->data, aux_ep->aux);
-}
-
-static void panel_simple_dp_aux_ep_remove(struct dp_aux_ep_device *aux_ep)
-{
-	panel_simple_remove(&aux_ep->dev);
-}
-
-static void panel_simple_dp_aux_ep_shutdown(struct dp_aux_ep_device *aux_ep)
-{
-	panel_simple_shutdown(&aux_ep->dev);
-}
-
-static struct dp_aux_ep_driver panel_simple_dp_aux_ep_driver = {
-	.driver = {
-		.name = "panel-simple-dp-aux",
-		.of_match_table = platform_of_match,	/* Same as platform one! */
-		.pm = &panel_simple_pm_ops,
-	},
-	.probe = panel_simple_dp_aux_ep_probe,
-	.remove = panel_simple_dp_aux_ep_remove,
-	.shutdown = panel_simple_dp_aux_ep_shutdown,
-};
-
 static int __init panel_simple_init(void)
 {
 	int err;
@@ -5283,21 +4245,14 @@ static int __init panel_simple_init(void)
 	if (err < 0)
 		return err;
 
-	err = dp_aux_dp_driver_register(&panel_simple_dp_aux_ep_driver);
-	if (err < 0)
-		goto err_did_platform_register;
-
 	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI)) {
 		err = mipi_dsi_driver_register(&panel_simple_dsi_driver);
 		if (err < 0)
-			goto err_did_aux_ep_register;
+			goto err_did_platform_register;
 	}
 
 	return 0;
 
-err_did_aux_ep_register:
-	dp_aux_dp_driver_unregister(&panel_simple_dp_aux_ep_driver);
-
 err_did_platform_register:
 	platform_driver_unregister(&panel_simple_platform_driver);
 
@@ -5310,7 +4265,6 @@ static void __exit panel_simple_exit(void)
 	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
 		mipi_dsi_driver_unregister(&panel_simple_dsi_driver);
 
-	dp_aux_dp_driver_unregister(&panel_simple_dp_aux_ep_driver);
 	platform_driver_unregister(&panel_simple_platform_driver);
 }
 module_exit(panel_simple_exit);

drivers/gpu/drm/panfrost/panfrost_device.c

@@ -398,8 +398,7 @@ void panfrost_device_reset(struct panfrost_device *pfdev)
 #ifdef CONFIG_PM
 int panfrost_device_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct panfrost_device *pfdev = platform_get_drvdata(pdev);
+	struct panfrost_device *pfdev = dev_get_drvdata(dev);
 
 	panfrost_device_reset(pfdev);
 	panfrost_devfreq_resume(pfdev);
@@ -409,8 +408,7 @@ int panfrost_device_resume(struct device *dev)
 
 int panfrost_device_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct panfrost_device *pfdev = platform_get_drvdata(pdev);
+	struct panfrost_device *pfdev = dev_get_drvdata(dev);
 
 	if (!panfrost_job_is_idle(pfdev))
 		return -EBUSY;

drivers/gpu/drm/panfrost/panfrost_drv.c

@@ -638,8 +638,8 @@ static const struct panfrost_compatible amlogic_data = {
 	.vendor_quirk = panfrost_gpu_amlogic_quirk,
 };
 
-const char * const mediatek_mt8183_supplies[] = { "mali", "sram" };
-const char * const mediatek_mt8183_pm_domains[] = { "core0", "core1", "core2" };
+static const char * const mediatek_mt8183_supplies[] = { "mali", "sram" };
+static const char * const mediatek_mt8183_pm_domains[] = { "core0", "core1", "core2" };
 static const struct panfrost_compatible mediatek_mt8183_data = {
 	.num_supplies = ARRAY_SIZE(mediatek_mt8183_supplies),
 	.supply_names = mediatek_mt8183_supplies,

drivers/gpu/drm/panfrost/panfrost_mmu.c

@@ -58,17 +58,33 @@ static int write_cmd(struct panfrost_device *pfdev, u32 as_nr, u32 cmd)
 }
 
 static void lock_region(struct panfrost_device *pfdev, u32 as_nr,
-			u64 iova, u64 size)
+			u64 region_start, u64 size)
 {
 	u8 region_width;
-	u64 region = iova & PAGE_MASK;
+	u64 region;
+	u64 region_end = region_start + size;
 
-	/* The size is encoded as ceil(log2) minus(1), which may be calculated
-	 * with fls. The size must be clamped to hardware bounds.
+	if (!size)
+		return;
+
+	/*
+	 * The locked region is a naturally aligned power of 2 block encoded as
+	 * log2 minus(1).
+	 * Calculate the desired start/end and look for the highest bit which
+	 * differs. The smallest naturally aligned block must include this bit
+	 * change, the desired region starts with this bit (and subsequent bits)
+	 * zeroed and ends with the bit (and subsequent bits) set to one.
 	 */
-	size = max_t(u64, size, AS_LOCK_REGION_MIN_SIZE);
-	region_width = fls64(size - 1) - 1;
-	region |= region_width;
+	region_width = max(fls64(region_start ^ (region_end - 1)),
+			   const_ilog2(AS_LOCK_REGION_MIN_SIZE)) - 1;
+
+	/*
+	 * Mask off the low bits of region_start (which would be ignored by
+	 * the hardware anyway)
+	 */
+	region_start &= GENMASK_ULL(63, region_width);
+
+	region = region_width | region_start;
 
 	/* Lock the region that needs to be updated */
 	mmu_write(pfdev, AS_LOCKADDR_LO(as_nr), lower_32_bits(region));

drivers/gpu/drm/rockchip/analogix_dp-rockchip.c

@@ -467,6 +467,6 @@ struct platform_driver rockchip_dp_driver = {
 	.driver = {
 		   .name = "rockchip-dp",
 		   .pm = &rockchip_dp_pm_ops,
-		   .of_match_table = of_match_ptr(rockchip_dp_dt_ids),
+		   .of_match_table = rockchip_dp_dt_ids,
 	},
 };

drivers/gpu/drm/rockchip/cdn-dp-core.c

@@ -697,7 +697,6 @@ static int cdn_dp_parse_dt(struct cdn_dp_device *dp)
 	struct device *dev = dp->dev;
 	struct device_node *np = dev->of_node;
 	struct platform_device *pdev = to_platform_device(dev);
-	struct resource *res;
 
 	dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
 	if (IS_ERR(dp->grf)) {
@@ -705,8 +704,7 @@ static int cdn_dp_parse_dt(struct cdn_dp_device *dp)
 		return PTR_ERR(dp->grf);
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dp->regs = devm_ioremap_resource(dev, res);
+	dp->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(dp->regs)) {
 		DRM_DEV_ERROR(dev, "ioremap reg failed\n");
 		return PTR_ERR(dp->regs);

drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c

@@ -14,7 +14,6 @@
 #include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/pm_runtime.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 
 #include <video/mipi_display.h>
@@ -643,7 +642,7 @@ struct hstt {
 }
 
 /* Table A-3 High-Speed Transition Times */
-struct hstt hstt_table[] = {
+static struct hstt hstt_table[] = {
 	HSTT(  90,  32, 20,  26, 13),
 	HSTT( 100,  35, 23,  28, 14),
 	HSTT( 110,  32, 22,  26, 13),

drivers/gpu/drm/rockchip/inno_hdmi.c

@@ -810,7 +810,6 @@ static int inno_hdmi_bind(struct device *dev, struct device *master,
 	struct platform_device *pdev = to_platform_device(dev);
 	struct drm_device *drm = data;
 	struct inno_hdmi *hdmi;
-	struct resource *iores;
 	int irq;
 	int ret;
 
@@ -821,8 +820,7 @@ static int inno_hdmi_bind(struct device *dev, struct device *master,
 	hdmi->dev = dev;
 	hdmi->drm_dev = drm;
 
-	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	hdmi->regs = devm_ioremap_resource(dev, iores);
+	hdmi->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(hdmi->regs))
 		return PTR_ERR(hdmi->regs);
 

drivers/gpu/drm/rockchip/rockchip_drm_drv.c

@@ -138,9 +138,6 @@ static int rockchip_drm_bind(struct device *dev)
 
 	drm_dev->dev_private = private;
 
-	INIT_LIST_HEAD(&private->psr_list);
-	mutex_init(&private->psr_list_lock);
-
 	ret = rockchip_drm_init_iommu(drm_dev);
 	if (ret)
 		goto err_free;
@@ -275,10 +272,17 @@ int rockchip_drm_endpoint_is_subdriver(struct device_node *ep)
 		return -ENODEV;
 
 	/* status disabled will prevent creation of platform-devices */
+	if (!of_device_is_available(node)) {
+		of_node_put(node);
+		return -ENODEV;
+	}
+
 	pdev = of_find_device_by_node(node);
 	of_node_put(node);
+
+	/* enabled non-platform-devices can immediately return here */
 	if (!pdev)
-		return -ENODEV;
+		return false;
 
 	/*
 	 * All rockchip subdrivers have probed at this point, so
@@ -370,7 +374,7 @@ static int rockchip_drm_platform_of_probe(struct device *dev)
 		}
 
 		iommu = of_parse_phandle(port->parent, "iommus", 0);
-		if (!iommu || !of_device_is_available(iommu->parent)) {
+		if (!iommu || !of_device_is_available(iommu)) {
 			DRM_DEV_DEBUG(dev,
 				      "no iommu attached for %pOF, using non-iommu buffers\n",
 				      port->parent);

drivers/gpu/drm/rockchip/rockchip_drm_drv.h

@@ -48,8 +48,6 @@ struct rockchip_drm_private {
 	struct iommu_domain *domain;
 	struct mutex mm_lock;
 	struct drm_mm mm;
-	struct list_head psr_list;
-	struct mutex psr_list_lock;
 };
 
 int rockchip_drm_dma_attach_device(struct drm_device *drm_dev,

drivers/gpu/drm/rockchip/rockchip_lvds.c

@@ -19,6 +19,7 @@
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
 #include <drm/drm_dp_helper.h>
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
@@ -439,11 +440,9 @@ struct drm_encoder_helper_funcs px30_lvds_encoder_helper_funcs = {
 static int rk3288_lvds_probe(struct platform_device *pdev,
 			     struct rockchip_lvds *lvds)
 {
-	struct resource *res;
 	int ret;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	lvds->regs = devm_ioremap_resource(lvds->dev, res);
+	lvds->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(lvds->regs))
 		return PTR_ERR(lvds->regs);
 
@@ -612,9 +611,9 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
 	}
 
 	drm_encoder_helper_add(encoder, lvds->soc_data->helper_funcs);
+	connector = &lvds->connector;
 
 	if (lvds->panel) {
-		connector = &lvds->connector;
 		connector->dpms = DRM_MODE_DPMS_OFF;
 		ret = drm_connector_init(drm_dev, connector,
 					 &rockchip_lvds_connector_funcs,
@@ -627,17 +626,27 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
 
 		drm_connector_helper_add(connector,
 					 &rockchip_lvds_connector_helper_funcs);
-
-		ret = drm_connector_attach_encoder(connector, encoder);
-		if (ret < 0) {
-			DRM_DEV_ERROR(drm_dev->dev,
-				      "failed to attach encoder: %d\n", ret);
-			goto err_free_connector;
-		}
 	} else {
-		ret = drm_bridge_attach(encoder, lvds->bridge, NULL, 0);
+		ret = drm_bridge_attach(encoder, lvds->bridge, NULL,
+					DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 		if (ret)
 			goto err_free_encoder;
+
+		connector = drm_bridge_connector_init(lvds->drm_dev, encoder);
+		if (IS_ERR(connector)) {
+			DRM_DEV_ERROR(drm_dev->dev,
+				      "failed to initialize bridge connector: %pe\n",
+				      connector);
+			ret = PTR_ERR(connector);
+			goto err_free_encoder;
+		}
+	}
+
+	ret = drm_connector_attach_encoder(connector, encoder);
+	if (ret < 0) {
+		DRM_DEV_ERROR(drm_dev->dev,
+			      "failed to attach encoder: %d\n", ret);
+		goto err_free_connector;
 	}
 
 	pm_runtime_enable(dev);

drivers/gpu/drm/rockchip/rockchip_rgb.c

@@ -10,6 +10,7 @@
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
 #include <drm/drm_dp_helper.h>
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
@@ -27,6 +28,7 @@ struct rockchip_rgb {
 	struct drm_device *drm_dev;
 	struct drm_bridge *bridge;
 	struct drm_encoder encoder;
+	struct drm_connector connector;
 	int output_mode;
 };
 
@@ -80,6 +82,7 @@ struct rockchip_rgb *rockchip_rgb_init(struct device *dev,
 	int ret = 0, child_count = 0;
 	struct drm_panel *panel;
 	struct drm_bridge *bridge;
+	struct drm_connector *connector;
 
 	rgb = devm_kzalloc(dev, sizeof(*rgb), GFP_KERNEL);
 	if (!rgb)
@@ -142,12 +145,32 @@ struct rockchip_rgb *rockchip_rgb_init(struct device *dev,
 
 	rgb->bridge = bridge;
 
-	ret = drm_bridge_attach(encoder, rgb->bridge, NULL, 0);
+	ret = drm_bridge_attach(encoder, rgb->bridge, NULL,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 	if (ret)
 		goto err_free_encoder;
 
+	connector = &rgb->connector;
+	connector = drm_bridge_connector_init(rgb->drm_dev, encoder);
+	if (IS_ERR(connector)) {
+		DRM_DEV_ERROR(drm_dev->dev,
+			      "failed to initialize bridge connector: %pe\n",
+			      connector);
+		ret = PTR_ERR(connector);
+		goto err_free_encoder;
+	}
+
+	ret = drm_connector_attach_encoder(connector, encoder);
+	if (ret < 0) {
+		DRM_DEV_ERROR(drm_dev->dev,
+			      "failed to attach encoder: %d\n", ret);
+		goto err_free_connector;
+	}
+
 	return rgb;
 
+err_free_connector:
+	drm_connector_cleanup(connector);
 err_free_encoder:
 	drm_encoder_cleanup(encoder);
 	return ERR_PTR(ret);
@@ -157,6 +180,7 @@ EXPORT_SYMBOL_GPL(rockchip_rgb_init);
 void rockchip_rgb_fini(struct rockchip_rgb *rgb)
 {
 	drm_panel_bridge_remove(rgb->bridge);
+	drm_connector_cleanup(&rgb->connector);
 	drm_encoder_cleanup(&rgb->encoder);
 }
 EXPORT_SYMBOL_GPL(rockchip_rgb_fini);

drivers/gpu/drm/rockchip/rockchip_vop_reg.c

@@ -1124,6 +1124,6 @@ struct platform_driver vop_platform_driver = {
 	.remove = vop_remove,
 	.driver = {
 		.name = "rockchip-vop",
-		.of_match_table = of_match_ptr(vop_driver_dt_match),
+		.of_match_table = vop_driver_dt_match,
 	},
 };

drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c

@@ -1126,10 +1126,9 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
 	}
 
 	dsi->regulator = devm_regulator_get(dev, "vcc-dsi");
-	if (IS_ERR(dsi->regulator)) {
-		dev_err(dev, "Couldn't get VCC-DSI supply\n");
-		return PTR_ERR(dsi->regulator);
-	}
+	if (IS_ERR(dsi->regulator))
+		return dev_err_probe(dev, PTR_ERR(dsi->regulator),
+				     "Couldn't get VCC-DSI supply\n");
 
 	dsi->reset = devm_reset_control_get_shared(dev, NULL);
 	if (IS_ERR(dsi->reset)) {
@@ -1144,10 +1143,9 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
 	}
 
 	dsi->bus_clk = devm_clk_get(dev, bus_clk_name);
-	if (IS_ERR(dsi->bus_clk)) {
-		dev_err(dev, "Couldn't get the DSI bus clock\n");
-		return PTR_ERR(dsi->bus_clk);
-	}
+	if (IS_ERR(dsi->bus_clk))
+		return dev_err_probe(dev, PTR_ERR(dsi->bus_clk),
+				     "Couldn't get the DSI bus clock\n");
 
 	ret = regmap_mmio_attach_clk(dsi->regs, dsi->bus_clk);
 	if (ret)

drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c

@@ -153,22 +153,19 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
 		return -EPROBE_DEFER;
 
 	hdmi->rst_ctrl = devm_reset_control_get(dev, "ctrl");
-	if (IS_ERR(hdmi->rst_ctrl)) {
-		dev_err(dev, "Could not get ctrl reset control\n");
-		return PTR_ERR(hdmi->rst_ctrl);
-	}
+	if (IS_ERR(hdmi->rst_ctrl))
+		return dev_err_probe(dev, PTR_ERR(hdmi->rst_ctrl),
+				     "Could not get ctrl reset control\n");
 
 	hdmi->clk_tmds = devm_clk_get(dev, "tmds");
-	if (IS_ERR(hdmi->clk_tmds)) {
-		dev_err(dev, "Couldn't get the tmds clock\n");
-		return PTR_ERR(hdmi->clk_tmds);
-	}
+	if (IS_ERR(hdmi->clk_tmds))
+		return dev_err_probe(dev, PTR_ERR(hdmi->clk_tmds),
+				     "Couldn't get the tmds clock\n");
 
 	hdmi->regulator = devm_regulator_get(dev, "hvcc");
-	if (IS_ERR(hdmi->regulator)) {
-		dev_err(dev, "Couldn't get regulator\n");
-		return PTR_ERR(hdmi->regulator);
-	}
+	if (IS_ERR(hdmi->regulator))
+		return dev_err_probe(dev, PTR_ERR(hdmi->regulator),
+				     "Couldn't get regulator\n");
 
 	ret = sun8i_dw_hdmi_find_connector_pdev(dev, &connector_pdev);
 	if (!ret) {

drivers/gpu/drm/v3d/v3d_drv.c

@@ -206,10 +206,7 @@ MODULE_DEVICE_TABLE(of, v3d_of_match);
 static int
 map_regs(struct v3d_dev *v3d, void __iomem **regs, const char *name)
 {
-	struct resource *res =
-		platform_get_resource_byname(v3d_to_pdev(v3d), IORESOURCE_MEM, name);
-
-	*regs = devm_ioremap_resource(v3d->drm.dev, res);
+	*regs = devm_platform_ioremap_resource_byname(v3d_to_pdev(v3d), name);
 	return PTR_ERR_OR_ZERO(*regs);
 }
 

drivers/gpu/drm/v3d/v3d_gem.c

@@ -567,14 +567,14 @@ v3d_submit_cl_ioctl(struct drm_device *dev, void *data,
 	if (args->bcl_start != args->bcl_end) {
 		bin = kcalloc(1, sizeof(*bin), GFP_KERNEL);
 		if (!bin) {
-			v3d_job_put(&render->base);
+			v3d_job_cleanup(&render->base);
 			return -ENOMEM;
 		}
 
 		ret = v3d_job_init(v3d, file_priv, &bin->base,
 				   v3d_job_free, args->in_sync_bcl, V3D_BIN);
 		if (ret) {
-			v3d_job_put(&render->base);
+			v3d_job_cleanup(&render->base);
 			kfree(bin);
 			return ret;
 		}
@@ -716,7 +716,7 @@ v3d_submit_tfu_ioctl(struct drm_device *dev, void *data,
 	job->base.bo = kcalloc(ARRAY_SIZE(args->bo_handles),
 			       sizeof(*job->base.bo), GFP_KERNEL);
 	if (!job->base.bo) {
-		v3d_job_put(&job->base);
+		v3d_job_cleanup(&job->base);
 		return -ENOMEM;
 	}
 
@@ -810,14 +810,13 @@ v3d_submit_csd_ioctl(struct drm_device *dev, void *data,
 
 	clean_job = kcalloc(1, sizeof(*clean_job), GFP_KERNEL);
 	if (!clean_job) {
-		v3d_job_put(&job->base);
-		kfree(job);
+		v3d_job_cleanup(&job->base);
 		return -ENOMEM;
 	}
 
 	ret = v3d_job_init(v3d, file_priv, clean_job, v3d_job_free, 0, V3D_CACHE_CLEAN);
 	if (ret) {
-		v3d_job_put(&job->base);
+		v3d_job_cleanup(&job->base);
 		kfree(clean_job);
 		return ret;
 	}

drivers/gpu/drm/virtio/virtgpu_vq.c

@@ -91,9 +91,7 @@ virtio_gpu_get_vbuf(struct virtio_gpu_device *vgdev,
 {
 	struct virtio_gpu_vbuffer *vbuf;
 
-	vbuf = kmem_cache_zalloc(vgdev->vbufs, GFP_KERNEL);
-	if (!vbuf)
-		return ERR_PTR(-ENOMEM);
+	vbuf = kmem_cache_zalloc(vgdev->vbufs, GFP_KERNEL | __GFP_NOFAIL);
 
 	BUG_ON(size > MAX_INLINE_CMD_SIZE ||
 	       size < sizeof(struct virtio_gpu_ctrl_hdr));
@@ -147,10 +145,6 @@ static void *virtio_gpu_alloc_cmd_resp(struct virtio_gpu_device *vgdev,
 
 	vbuf = virtio_gpu_get_vbuf(vgdev, cmd_size,
 				   resp_size, resp_buf, cb);
-	if (IS_ERR(vbuf)) {
-		*vbuffer_p = NULL;
-		return ERR_CAST(vbuf);
-	}
 	*vbuffer_p = vbuf;
 	return (struct virtio_gpu_command *)vbuf->buf;
 }

include/drm/drm_edid.h

@@ -508,6 +508,50 @@ static inline u8 drm_eld_get_conn_type(const uint8_t *eld)
 	return eld[DRM_ELD_SAD_COUNT_CONN_TYPE] & DRM_ELD_CONN_TYPE_MASK;
 }
 
+/**
+ * drm_edid_encode_panel_id - Encode an ID for matching against drm_edid_get_panel_id()
+ * @vend: 3-character vendor string
+ * @product_id: The 16-bit product ID.
+ *
+ * This is a macro so that it can be calculated at compile time and used
+ * as an initializer.
+ *
+ * For instance:
+ *   drm_edid_encode_panel_id("BOE", 0x2d08) => 0x09e52d08
+ *
+ * Return: a 32-bit ID per panel.
+ */
+#define drm_edid_encode_panel_id(vend, product_id) \
+	((((u32)((vend)[0]) - '@') & 0x1f) << 26 | \
+	 (((u32)((vend)[1]) - '@') & 0x1f) << 21 | \
+	 (((u32)((vend)[2]) - '@') & 0x1f) << 16 | \
+	 ((product_id) & 0xffff))
+
+/**
+ * drm_edid_decode_panel_id - Decode a panel ID from drm_edid_encode_panel_id()
+ * @panel_id: The panel ID to decode.
+ * @vend: A 4-byte buffer to store the 3-letter vendor string plus a '\0'
+ *	  termination
+ * @product_id: The product ID will be returned here.
+ *
+ * For instance, after:
+ *   drm_edid_decode_panel_id(0x09e52d08, vend, &product_id)
+ * These will be true:
+ *   vend[0] = 'B'
+ *   vend[1] = 'O'
+ *   vend[2] = 'E'
+ *   vend[3] = '\0'
+ *   product_id = 0x2d08
+ */
+static inline void drm_edid_decode_panel_id(u32 panel_id, char vend[4], u16 *product_id)
+{
+	*product_id = (u16)(panel_id & 0xffff);
+	vend[0] = '@' + ((panel_id >> 26) & 0x1f);
+	vend[1] = '@' + ((panel_id >> 21) & 0x1f);
+	vend[2] = '@' + ((panel_id >> 16) & 0x1f);
+	vend[3] = '\0';
+}
+
 bool drm_probe_ddc(struct i2c_adapter *adapter);
 struct edid *drm_do_get_edid(struct drm_connector *connector,
 	int (*get_edid_block)(void *data, u8 *buf, unsigned int block,
@@ -515,6 +559,7 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,
 	void *data);
 struct edid *drm_get_edid(struct drm_connector *connector,
 			  struct i2c_adapter *adapter);
+u32 drm_edid_get_panel_id(struct i2c_adapter *adapter);
 struct edid *drm_get_edid_switcheroo(struct drm_connector *connector,
 				     struct i2c_adapter *adapter);
 struct edid *drm_edid_duplicate(const struct edid *edid);