Commit f61143c4 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd"

 - one stm32f4 fix for a change that introduced the PLL_I2S and PLL_SAI
   boards

 - two Allwinner clk driver build fixes

 - two Allwinner CPU clk driver fixes where we see random CPUFreq
   crashes because the CPU's PLL locks up sometimes when we change the
   rate

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sunxi-ng: a33: gate then ungate PLL CPU clk after rate change
  clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks
  clk: sunxi-ng: fix build failure in ccu-sun9i-a80 driver
  clk: sunxi-ng: fix build error without CONFIG_RESET_CONTROLLER
  clk: stm32f4: fix: exclude values 0 and 1 for PLLQ
parents 4988f7a4 e7590308
......@@ -429,6 +429,13 @@ static const struct clk_div_table pll_divp_table[] = {
{ 0, 2 }, { 1, 4 }, { 2, 6 }, { 3, 8 }, { 0 }
};
static const struct clk_div_table pll_divq_table[] = {
{ 2, 2 }, { 3, 3 }, { 4, 4 }, { 5, 5 }, { 6, 6 }, { 7, 7 },
{ 8, 8 }, { 9, 9 }, { 10, 10 }, { 11, 11 }, { 12, 12 }, { 13, 13 },
{ 14, 14 }, { 15, 15 },
{ 0 }
};
static const struct clk_div_table pll_divr_table[] = {
{ 2, 2 }, { 3, 3 }, { 4, 4 }, { 5, 5 }, { 6, 6 }, { 7, 7 }, { 0 }
};
......@@ -497,7 +504,7 @@ struct stm32f4_div_data {
#define MAX_PLL_DIV 3
static const struct stm32f4_div_data div_data[MAX_PLL_DIV] = {
{ 16, 2, 0, pll_divp_table },
{ 24, 4, CLK_DIVIDER_ONE_BASED, NULL },
{ 24, 4, 0, pll_divq_table },
{ 28, 3, 0, pll_divr_table },
};
......
config SUNXI_CCU
bool "Clock support for Allwinner SoCs"
depends on ARCH_SUNXI || COMPILE_TEST
select RESET_CONTROLLER
default ARCH_SUNXI
if SUNXI_CCU
......@@ -135,6 +136,7 @@ config SUN8I_V3S_CCU
config SUN9I_A80_CCU
bool "Support for the Allwinner A80 CCU"
select SUNXI_CCU_DIV
select SUNXI_CCU_MULT
select SUNXI_CCU_GATE
select SUNXI_CCU_NKMP
select SUNXI_CCU_NM
......
......@@ -752,6 +752,13 @@ static const struct sunxi_ccu_desc sun8i_a33_ccu_desc = {
.num_resets = ARRAY_SIZE(sun8i_a33_ccu_resets),
};
static struct ccu_pll_nb sun8i_a33_pll_cpu_nb = {
.common = &pll_cpux_clk.common,
/* copy from pll_cpux_clk */
.enable = BIT(31),
.lock = BIT(28),
};
static struct ccu_mux_nb sun8i_a33_cpu_nb = {
.common = &cpux_clk.common,
.cm = &cpux_clk.mux,
......@@ -783,6 +790,10 @@ static void __init sun8i_a33_ccu_setup(struct device_node *node)
sunxi_ccu_probe(node, reg, &sun8i_a33_ccu_desc);
/* Gate then ungate PLL CPU after any rate changes */
ccu_pll_notifier_register(&sun8i_a33_pll_cpu_nb);
/* Reparent CPU during PLL CPU rate changes */
ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
&sun8i_a33_cpu_nb);
}
......
......@@ -14,11 +14,13 @@
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/iopoll.h>
#include <linux/slab.h>
#include "ccu_common.h"
#include "ccu_gate.h"
#include "ccu_reset.h"
static DEFINE_SPINLOCK(ccu_lock);
......@@ -39,6 +41,53 @@ void ccu_helper_wait_for_lock(struct ccu_common *common, u32 lock)
WARN_ON(readl_relaxed_poll_timeout(addr, reg, reg & lock, 100, 70000));
}
/*
* This clock notifier is called when the frequency of a PLL clock is
* changed. In common PLL designs, changes to the dividers take effect
* almost immediately, while changes to the multipliers (implemented
* as dividers in the feedback loop) take a few cycles to work into
* the feedback loop for the PLL to stablize.
*
* Sometimes when the PLL clock rate is changed, the decrease in the
* divider is too much for the decrease in the multiplier to catch up.
* The PLL clock rate will spike, and in some cases, might lock up
* completely.
*
* This notifier callback will gate and then ungate the clock,
* effectively resetting it, so it proceeds to work. Care must be
* taken to reparent consumers to other temporary clocks during the
* rate change, and that this notifier callback must be the first
* to be registered.
*/
static int ccu_pll_notifier_cb(struct notifier_block *nb,
unsigned long event, void *data)
{
struct ccu_pll_nb *pll = to_ccu_pll_nb(nb);
int ret = 0;
if (event != POST_RATE_CHANGE)
goto out;
ccu_gate_helper_disable(pll->common, pll->enable);
ret = ccu_gate_helper_enable(pll->common, pll->enable);
if (ret)
goto out;
ccu_helper_wait_for_lock(pll->common, pll->lock);
out:
return notifier_from_errno(ret);
}
int ccu_pll_notifier_register(struct ccu_pll_nb *pll_nb)
{
pll_nb->clk_nb.notifier_call = ccu_pll_notifier_cb;
return clk_notifier_register(pll_nb->common->hw.clk,
&pll_nb->clk_nb);
}
int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
const struct sunxi_ccu_desc *desc)
{
......
......@@ -83,6 +83,18 @@ struct sunxi_ccu_desc {
void ccu_helper_wait_for_lock(struct ccu_common *common, u32 lock);
struct ccu_pll_nb {
struct notifier_block clk_nb;
struct ccu_common *common;
u32 enable;
u32 lock;
};
#define to_ccu_pll_nb(_nb) container_of(_nb, struct ccu_pll_nb, clk_nb)
int ccu_pll_notifier_register(struct ccu_pll_nb *pll_nb);
int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
const struct sunxi_ccu_desc *desc);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment