Skip to content

L
linux
Commit f7e837b2 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge signal arch cleanups

parents 849badb7 2cf5814b
Hide whitespace changes
Inline Side-by-side
Showing with 731 additions and 6195 deletions
arch/cris/kernel/signal.c
View file @ f7e837b2
......@@ -518,9 +518,11 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
*/
static inline void
handle_signal(int canrestart, unsigned long sig, struct k_sigaction *ka,
handle_signal(int canrestart, unsigned long sig,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
{
struct k_sigaction *ka = &current->sig->action[sig-1];
/* Are we from a system call? */
if (canrestart) {
/* If so, check system call restarting.. */
......@@ -580,7 +582,7 @@ handle_signal(int canrestart, unsigned long sig, struct k_sigaction *ka,
int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
{
siginfo_t info;
struct k_sigaction *ka;
int signr;
/*
* We want the common case to go fast, which
......@@ -594,98 +596,10 @@ int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
if (!oldset)
oldset = &current->blocked;
for (;;) {
unsigned long signr;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = &current->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
lock_kernel();
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
handle_signal(canrestart, signr, ka, &info, oldset, regs);
handle_signal(canrestart, signr, &info, oldset, regs);
return 1;
}
......
arch/i386/kernel/signal.c
View file @ f7e837b2
......@@ -18,9 +18,7 @@
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/tty.h>
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <linux/suspend.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
......@@ -500,9 +498,11 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
*/
static void
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
handle_signal(unsigned long sig, siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs)
{
struct k_sigaction *ka = &current->sig->action[sig-1];
/* Are we from a system call? */
if (regs->orig_eax >= 0) {
/* If so, check system call restarting.. */
......@@ -549,7 +549,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
int do_signal(struct pt_regs *regs, sigset_t *oldset)
{
siginfo_t info;
struct k_sigaction *ka;
int signr;
/*
* We want the common case to go fast, which
......@@ -568,98 +568,8 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
if (!oldset)
oldset = &current->blocked;
for (;;) {
unsigned long signr;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->parent->pid;
info.si_uid = current->parent->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = &current->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP: {
struct signal_struct *sig;
current->state = TASK_STOPPED;
current->exit_code = signr;
sig = current->parent->sig;
if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
}
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
/* Reenable any watchpoints before delivering the
* signal to user space. The processor register will
* have been cleared if the watchpoint triggered
......@@ -668,7 +578,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
__asm__("movl %0,%%db7" : : "r" (current->thread.debugreg[7]));
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
handle_signal(signr, &info, oldset, regs);
return 1;
}
......
arch/mips/kernel/signal.c
View file @ f7e837b2
......@@ -487,9 +487,11 @@ setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
}
static inline void
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
handle_signal(unsigned long sig, siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs)
{
struct k_sigaction *ka = &current->sig->action[sig-1];
if (ka->sa.sa_flags & SA_SIGINFO)
setup_rt_frame(ka, regs, sig, oldset, info);
else
......@@ -531,8 +533,8 @@ extern int do_irix_signal(sigset_t *oldset, struct pt_regs *regs);
asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs)
{
struct k_sigaction *ka;
siginfo_t info;
int sig_nr;
#ifdef CONFIG_BINFMT_IRIX
if (current->personality != PER_LINUX)
......@@ -542,99 +544,12 @@ asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs)
if (!oldset)
oldset = &current->blocked;
for (;;) {
unsigned long signr;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = &current->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
if (regs->regs[0])
syscall_restart(regs, ka);
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
handle_signal(signr, &info, oldset, regs);
return 1;
}
......
arch/mips64/kernel/signal.c
View file @ f7e837b2
......@@ -543,10 +543,11 @@ static void inline setup_rt_frame(struct k_sigaction * ka,
force_sig(SIGSEGV, current);
}
static inline void handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset,
struct pt_regs *regs)
static inline void handle_signal(unsigned long sig, siginfo_t *info,
sigset_t *oldset, struct pt_regs *regs)
{
struct k_sigaction *ka = &current->sig->action[sig-1];
if (ka->sa.sa_flags & SA_SIGINFO)
setup_rt_frame(ka, regs, sig, oldset, info);
else
......@@ -589,8 +590,8 @@ extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs)
{
struct k_sigaction *ka;
siginfo_t info;
int signr;
#ifdef CONFIG_BINFMT_ELF32
if (current->thread.mflags & MF_32BIT) {
......@@ -601,99 +602,12 @@ asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs)
if (!oldset)
oldset = &current->blocked;
for (;;) {
unsigned long signr;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = &current->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
if (regs->regs[0])
syscall_restart(regs, ka);
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
handle_signal(signr, &info, oldset, regs);
return 1;
}
......
arch/mips64/kernel/signal32.c
View file @ f7e837b2
......@@ -625,9 +625,11 @@ setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
}
static inline void
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
handle_signal(unsigned long sig siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs)
{
struct k_sigaction *ka = &current->sig->action[sig-1];
if (ka->sa.sa_flags & SA_SIGINFO)
setup_rt_frame(ka, regs, sig, oldset, info);
else
......@@ -667,105 +669,18 @@ syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
asmlinkage int do_signal32(sigset_t *oldset, struct pt_regs *regs)
{
struct k_sigaction *ka;
siginfo_t info;
int signr;
if (!oldset)
oldset = &current->blocked;
for (;;) {
unsigned long signr;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = &current->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
if (regs->regs[0])
syscall_restart(regs, ka);
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
handle_signal(signr, &info, oldset, regs);
return 1;
}
......
arch/parisc/kernel/signal.c
View file @ f7e837b2
......@@ -432,10 +432,11 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
*/
static long
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset,
handle_signal(unsigned long sig, siginfo_t *info, sigset_t *oldset,
struct pt_regs *regs, int in_syscall)
{
struct k_sigaction *ka = &current->sig->action[sig-1];
#if DEBUG_SIG
printk("handle_signal(sig=%ld, ka=%p, info=%p, oldset=%p, regs=%p)\n",
sig, ka, info, oldset, regs);
......@@ -473,6 +474,7 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall)
{
siginfo_t info;
struct k_sigaction *ka;
int signr;
#if DEBUG_SIG
printk("do_signal(oldset=0x%p, regs=0x%p, sr7 %#lx, pending %d, in_syscall=%d\n",
......@@ -490,102 +492,8 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall)
printk("do_signal: oldset %08lx:%08lx\n", oldset->sig[0], oldset->sig[1]);
#endif
for (;;) {
unsigned long signr;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
#if DEBUG_SIG
printk("do_signal: signr=%ld, pid=%d\n", signr, current->pid);
#endif
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
set_current_state(TASK_STOPPED);
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = &current->sig->action[signr-1];
#if DEBUG_SIG
printk("sa_handler is %lx\n", ka->sa.sa_handler);
#endif
if ((unsigned long) ka->sa.sa_handler == (unsigned long) SIG_IGN) {
if (signr != SIGCHLD)
continue;
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if ((unsigned long) ka->sa.sa_handler == (unsigned long) SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
set_current_state(TASK_STOPPED);
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (signr == SIGQUIT) /* Userspace debugging */
show_regs(regs);
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
/* Restart a system call if necessary. */
if (in_syscall) {
/* Check the return code */
......@@ -598,6 +506,7 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall)
break;
case -ERESTARTSYS:
ka = &current->sig->action[signr-1];
if (!(ka->sa.sa_flags & SA_RESTART)) {
#if DEBUG_SIG
printk("ERESTARTSYS: putting -EINTR\n");
......@@ -619,7 +528,7 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall)
/* Whee! Actually deliver the signal. If the
delivery failed, we need to continue to iterate in
this loop so we can deliver the SIGSEGV... */
if (handle_signal(signr, ka, &info, oldset, regs, in_syscall)) {
if (handle_signal(signr, &info, oldset, regs, in_syscall)) {
#if DEBUG_SIG
printk("Exiting do_signal (success), regs->gr[28] = %ld\n", regs->gr[28]);
#endif
......
arch/ppc/kernel/signal.c
View file @ f7e837b2
......@@ -391,12 +391,12 @@ setup_frame(struct pt_regs *regs, struct sigregs *frame,
* OK, we're invoking a handler
*/
static void
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs,
unsigned long *newspp, unsigned long frame)
handle_signal(unsigned long sig, siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs, unsigned long *newspp, unsigned long frame)
{
struct sigcontext_struct *sc;
struct rt_sigframe *rt_sf;
struct k_sigaction *ka = &current->sig->action[sig-1];
if (TRAP(regs) == 0x0C00 /* System Call! */
&& ((int)regs->result == -ERESTARTNOHAND ||
......@@ -480,101 +480,16 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
siginfo_t info;
struct k_sigaction *ka;
unsigned long frame, newsp;
int signr;
if (!oldset)
oldset = &current->blocked;
newsp = frame = 0;
for (;;) {
unsigned long signr;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->parent->pid;
info.si_uid = current->parent->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
ka = &current->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->parent->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
if ( (ka->sa.sa_flags & SA_ONSTACK)
&& (! on_sig_stack(regs->gpr[1])))
newsp = (current->sas_ss_sp + current->sas_ss_size);
......@@ -583,8 +498,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
newsp = frame = newsp - sizeof(struct sigregs);
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs, &newsp, frame);
break;
handle_signal(signr, &info, oldset, regs, &newsp, frame);
}
if (TRAP(regs) == 0x0C00 /* System Call! */ &&
......
arch/ppc64/kernel/signal.c
View file @ f7e837b2
......@@ -509,12 +509,12 @@ setup_frame(struct pt_regs *regs, struct sigregs *frame,
* OK, we're invoking a handler
*/
static void
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs,
unsigned long *newspp, unsigned long frame)
handle_signal(unsigned long sig, siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs, unsigned long *newspp, unsigned long frame)
{
struct sigcontext_struct *sc;
struct rt_sigframe *rt_sf;
struct k_sigaction *ka = &current->sig->action[sig-1];
if (regs->trap == 0x0C00 /* System Call! */
&& ((int)regs->result == -ERESTARTNOHAND ||
......@@ -598,6 +598,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
siginfo_t info;
struct k_sigaction *ka;
unsigned long frame, newsp;
int signr;
/*
* If the current thread is 32 bit - invoke the
......@@ -611,103 +612,9 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
newsp = frame = 0;
for (;;) {
unsigned long signr;
PPCDBG(PPCDBG_SIGNAL, "do_signal - (pre) dequeueing signal - pid=%ld current=%lx comm=%s \n", current->pid, current, current->comm);
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
PPCDBG(PPCDBG_SIGNAL, "do_signal - (aft) dequeueing signal - signal=%lx - pid=%ld current=%lx comm=%s \n", signr, current->pid, current, current->comm);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->parent->pid;
info.si_uid = current->parent->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
ka = &current->sig->action[signr-1];
PPCDBG(PPCDBG_SIGNAL, "do_signal - ka=%p, action handler=%lx \n", ka, ka->sa.sa_handler);
if (ka->sa.sa_handler == SIG_IGN) {
PPCDBG(PPCDBG_SIGNAL, "do_signal - into SIG_IGN logic \n");
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
PPCDBG(PPCDBG_SIGNAL, "do_signal - into SIG_DFL logic \n");
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->parent->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
if ( (ka->sa.sa_flags & SA_ONSTACK)
&& (! on_sig_stack(regs->gpr[1])))
newsp = (current->sas_ss_sp + current->sas_ss_size);
......@@ -718,9 +625,8 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
/* Whee! Actually deliver the signal. */
PPCDBG(PPCDBG_SIGNAL, "do_signal - GOING TO RUN SIGNAL HANDLER - pid=%ld current=%lx comm=%s \n", current->pid, current, current->comm);
handle_signal(signr, ka, &info, oldset, regs, &newsp, frame);
handle_signal(signr, &info, oldset, regs, &newsp, frame);
PPCDBG(PPCDBG_SIGNAL, "do_signal - after running signal handler - pid=%ld current=%lx comm=%s \n", current->pid, current, current->comm);
break;
}
if (regs->trap == 0x0C00 /* System Call! */ &&
......
arch/ppc64/kernel/signal32.c
View file @ f7e837b2
......@@ -1187,13 +1187,13 @@ setup_rt_frame32(struct pt_regs *regs, struct sigregs32 *frame,
* OK, we're invoking a handler
*/
static void
handle_signal32(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs,
unsigned int *newspp, unsigned int frame)
handle_signal32(unsigned long sig, siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs, unsigned int *newspp, unsigned int frame)
{
struct sigcontext32_struct *sc;
struct rt_sigframe_32 *rt_stack_frame;
siginfo_t32 siginfo32bit;
struct k_sigaction *ka = &current->sig->action[sig-1];
if (regs->trap == 0x0C00 /* System Call! */
&& ((int)regs->result == -ERESTARTNOHAND ||
......@@ -1337,114 +1337,23 @@ int do_signal32(sigset_t *oldset, struct pt_regs *regs)
siginfo_t info;
struct k_sigaction *ka;
unsigned int frame, newsp;
int signr;
if (!oldset)
oldset = &current->blocked;
newsp = frame = 0;
for (;;) {
unsigned long signr;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
ifppcdebug(PPCDBG_SYS32) {
if (signr)
udbg_printf("do_signal32 - processing signal=%2lx - pid=%ld, comm=%s \n", signr, current->pid, current->comm);
}
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->parent->pid;
info.si_uid = current->parent->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
ka = &current->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->parent->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
PPCDBG(PPCDBG_SIGNAL, " do signal :sigaction flags = %lx \n" ,ka->sa.sa_flags);
PPCDBG(PPCDBG_SIGNAL, " do signal :on sig stack = %lx \n" ,on_sig_stack(regs->gpr[1]));
PPCDBG(PPCDBG_SIGNAL, " do signal :reg1 = %lx \n" ,regs->gpr[1]);
PPCDBG(PPCDBG_SIGNAL, " do signal :alt stack = %lx \n" ,current->sas_ss_sp);
PPCDBG(PPCDBG_SIGNAL, " do signal :alt stack size = %lx \n" ,current->sas_ss_size);
if ( (ka->sa.sa_flags & SA_ONSTACK)
&& (! on_sig_stack(regs->gpr[1])))
{
......@@ -1454,8 +1363,7 @@ int do_signal32(sigset_t *oldset, struct pt_regs *regs)
newsp = frame = newsp - sizeof(struct sigregs32);
/* Whee! Actually deliver the signal. */
handle_signal32(signr, ka, &info, oldset, regs, &newsp, frame);
break;
handle_signal32(signr, &info, oldset, regs, &newsp, frame);
}
if (regs->trap == 0x0C00 /* System Call! */ &&
......@@ -1468,9 +1376,8 @@ int do_signal32(sigset_t *oldset, struct pt_regs *regs)
}
if (newsp == frame)
{
return 0; /* no signals delivered */
}
// Invoke correct stack setup routine
if (ka->sa.sa_flags & SA_SIGINFO)
setup_rt_frame32(regs, (struct sigregs32*)(u64)frame, newsp);
......
arch/s390/kernel/signal.c
View file @ f7e837b2
......@@ -374,9 +374,11 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
*/
static void
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
handle_signal(unsigned long sig, siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs)
{
struct k_sigaction *ka = &current->sig->action[sig-1];
/* Are we from a system call? */
if (regs->trap == __LC_SVC_OLD_PSW) {
/* If so, check system call restarting.. */
......@@ -427,7 +429,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
int do_signal(struct pt_regs *regs, sigset_t *oldset)
{
siginfo_t info;
struct k_sigaction *ka;
int signr;
/*
* We want the common case to go fast, which
......@@ -441,100 +443,10 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
if (!oldset)
oldset = &current->blocked;
for (;;) {
unsigned long signr;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
set_current_state(TASK_STOPPED);
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = &current->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP: {
struct signal_struct *sig;
set_current_state(TASK_STOPPED);
current->exit_code = signr;
sig = current->p_pptr->sig;
if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
}
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
handle_signal(signr, &info, oldset, regs);
return 1;
}
......
arch/s390x/kernel/signal.c
View file @ f7e837b2
......@@ -374,9 +374,11 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
*/
static void
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
handle_signal(unsigned long sig, siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs)
{
struct k_sigaction *ka = &current->sig->action[sig-1];
/* Are we from a system call? */
if (regs->trap == __LC_SVC_OLD_PSW) {
/* If so, check system call restarting.. */
......@@ -427,7 +429,6 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
int do_signal(struct pt_regs *regs, sigset_t *oldset)
{
siginfo_t info;
struct k_sigaction *ka;
/*
* We want the common case to go fast, which
......@@ -447,100 +448,10 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
}
#endif
for (;;) {
unsigned long signr;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
set_current_state(TASK_STOPPED);
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = &current->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP: {
struct signal_struct *sig;
set_current_state(TASK_STOPPED);
current->exit_code = signr;
sig = current->p_pptr->sig;
if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
}
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
handle_signal(signr, &info, oldset, regs);
return 1;
}
......
arch/s390x/kernel/signal32.c
View file @ f7e837b2
......@@ -548,9 +548,11 @@ static void setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info,
*/
static void
handle_signal32(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
handle_signal32(unsigned long sig, siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs)
{
struct k_sigaction *ka = &current->sig->action[sig-1];
/* Are we from a system call? */
if (regs->trap == __LC_SVC_OLD_PSW) {
/* If so, check system call restarting.. */
......@@ -601,7 +603,7 @@ handle_signal32(unsigned long sig, struct k_sigaction *ka,
int do_signal32(struct pt_regs *regs, sigset_t *oldset)
{
siginfo_t info;
struct k_sigaction *ka;
int signr;
/*
* We want the common case to go fast, which
......@@ -615,97 +617,10 @@ int do_signal32(struct pt_regs *regs, sigset_t *oldset)
if (!oldset)
oldset = &current->blocked;
for (;;) {
unsigned long signr;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
set_current_state(TASK_STOPPED);
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = &current->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
set_current_state(TASK_STOPPED);
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
handle_signal32(signr, ka, &info, oldset, regs);
handle_signal32(signr, &info, oldset, regs);
return 1;
}
......
arch/sh/kernel/signal.c
View file @ f7e837b2
......@@ -487,9 +487,11 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
*/
static void
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
handle_signal(unsigned long sig, siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs)
{
struct k_sigaction *ka = &current->sig->action[sig-1];
/* Are we from a system call? */
if (regs->syscall_nr >= 0) {
/* If so, check system call restarting.. */
......@@ -540,7 +542,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
int do_signal(struct pt_regs *regs, sigset_t *oldset)
{
siginfo_t info;
struct k_sigaction *ka;
int signr;
/*
* We want the common case to go fast, which
......@@ -554,97 +556,10 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
if (!oldset)
oldset = &current->blocked;
for (;;) {
unsigned long signr;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = &current->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
handle_signal(signr, &info, oldset, regs);
return 1;
}
......
arch/x86_64/kernel/signal.c
View file @ f7e837b2
......@@ -345,9 +345,11 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
*/
static void
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
handle_signal(unsigned long sig, siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs)
{
struct k_sigaction *ka = &current->sig->action[sig-1];
#if DEBUG_SIG
printk("handle_signal pid:%d sig:%lu rip:%lx rsp:%lx regs=%p\n", current->pid, sig,
regs->rip, regs->rsp, regs);
......@@ -403,7 +405,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
int do_signal(struct pt_regs *regs, sigset_t *oldset)
{
siginfo_t info;
struct k_sigaction *ka;
int signr;
/*
* We want the common case to go fast, which
......@@ -418,101 +420,8 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
if (!oldset)
oldset = &current->blocked;
for (;;) {
unsigned long signr;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, &info);
spin_unlock_irq(&current->sigmask_lock);
if (!signr) {
break;
}
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->parent->pid;
info.si_uid = current->parent->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = &current->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP: {
struct signal_struct *sig;
preempt_disable();
current->state = TASK_STOPPED;
current->exit_code = signr;
sig = current->parent->sig;
if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
preempt_enable();
continue;
}
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
signr = get_signal_to_deliver(&info, regs);
if (signr > 0) {
/* Reenable any watchpoints before delivering the
* signal to user space. The processor register will
* have been cleared if the watchpoint triggered
......@@ -521,7 +430,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
__asm__("movq %0,%%db7" : : "r" (current->thread.debugreg[7]));
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
handle_signal(signr, &info, oldset, regs);
return 1;
}
......
include/asm-alpha/errno.h
View file @ f7e837b2
#ifndef _ALPHA_ERRNO_H
#define _ALPHA_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#include <asm-generic/errno-base.h>
#undef EAGAIN /* 11 in errno-base.h */
#define EDEADLK 11 /* Resource deadlock would occur */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EAGAIN 35 /* Try again */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define EINPROGRESS 36 /* Operation now in progress */
......
include/asm-alpha/siginfo.h
View file @ f7e837b2
#ifndef _ALPHA_SIGINFO_H
#define _ALPHA_SIGINFO_H
#include <linux/types.h>
/* This structure matches OSF/1 for binary compatibility. */
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 4)
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
unsigned int _timer1;
unsigned int _timer2;
} _timer;
/* POSIX.1b signals */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
pid_t _pid; /* which child */
uid_t _uid; /* sender's uid */
int _status; /* exit code */
clock_t _utime;
clock_t _stime;
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void *_addr; /* faulting insn/memory ref. */
} _sigfault;
/* SIGPOLL */
struct {
int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_DETHREAD -7 /* sent by execve() killing subsidiary threads */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 4)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define HAVE_ARCH_COPY_SIGINFO
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#include <asm-generic/siginfo.h>
#ifdef __KERNEL__
#include <linux/string.h>
......@@ -227,9 +21,6 @@ extern inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
memcpy(to, from, 4*sizeof(int) + sizeof(from->_sifields._sigchld));
}
#define HAVE_ARCH_COPY_SIGINFO_TO_USER
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#endif
include/asm-alpha/signal.h
View file @ f7e837b2
......@@ -185,6 +185,9 @@ struct sigstack {
#ifdef __KERNEL__
#include <asm/sigcontext.h>
#define HAVE_ARCH_GET_SIGNAL_TO_DELIVER
#endif
#endif
include/asm-arm/errno.h
View file @ f7e837b2
#ifndef _ARM_ERRNO_H
#define _ARM_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#include <asm-generic/errno.h>
#endif
include/asm-arm/siginfo.h
View file @ f7e837b2
#ifndef _ASMARM_SIGINFO_H
#define _ASMARM_SIGINFO_H
#include <linux/types.h>
/* XXX: This structure was copied from the Alpha; is there an iBCS version? */
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
unsigned int _timer1;
unsigned int _timer2;
} _timer;
/* POSIX.1b signals */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
pid_t _pid; /* which child */
uid_t _uid; /* sender's uid */
int _status; /* exit code */
clock_t _utime;
clock_t _stime;
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void *_addr; /* faulting insn/memory ref. */
} _sigfault;
/* SIGPOLL */
struct {
int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_DETHREAD -7 /* sent by execve() killing subsidiary threads */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
static inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#include <asm-generic/siginfo.h>
#endif
include/asm-arm/signal.h
View file @ f7e837b2
......@@ -187,6 +187,8 @@ typedef struct sigaltstack {
#define sigmask(sig) (1UL << ((sig) - 1))
#define HAVE_ARCH_GET_SIGNAL_TO_DELIVER
#endif
#endif
include/asm-cris/errno.h
View file @ f7e837b2
/* verbatim copy of asm-i386/errno.h */
#ifndef _CRIS_ERRNO_H
#define _CRIS_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#include <asm-generic/errno.h>
#endif
include/asm-cris/siginfo.h
View file @ f7e837b2
#ifndef _CRIS_SIGINFO_H
#define _CRIS_SIGINFO_H
#include <linux/types.h>
/* This is copied from asm-m68k/siginfo.h. */
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
unsigned int _timer1;
unsigned int _timer2;
} _timer;
/* POSIX.1b signals */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
pid_t _pid; /* which child */
uid_t _uid; /* sender's uid */
int _status; /* exit code */
clock_t _utime;
clock_t _stime;
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void *_addr; /* faulting insn/memory ref. */
} _sigfault;
/* SIGPOLL */
struct {
int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
extern inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
#define HAVE_ARCH_COPY_SIGINFO_TO_USER
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#include <asm-generic/siginfo.h>
#endif
include/asm-generic/errno-base.h 0 → 100644
View file @ f7e837b2
#ifndef _ASM_GENERIC_ERRNO_BASE_H
#define _ASM_GENERIC_ERRNO_BASE_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Argument list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#endif
include/asm-generic/errno.h 0 → 100644
View file @ f7e837b2
#ifndef _ASM_GENERIC_ERRNO_H
#define _ASM_GENERIC_ERRNO_H
#include <asm-generic/errno-base.h>
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#endif
include/asm-generic/siginfo.h 0 → 100644
View file @ f7e837b2
#ifndef _ASM_GENERIC_SIGINFO_H
#define _ASM_GENERIC_SIGINFO_H
#include <linux/types.h>
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#ifndef SI_PAD_SIZE
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
#endif
#ifndef HAVE_ARCH_SIGINFO_T
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
unsigned int _timer1;
unsigned int _timer2;
} _timer;
/* POSIX.1b signals */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
pid_t _pid; /* which child */
uid_t _uid; /* sender's uid */
int _status; /* exit code */
clock_t _utime;
clock_t _stime;
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void *_addr; /* faulting insn/memory ref. */
} _sigfault;
/* SIGPOLL */
struct {
int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
} _sifields;
} siginfo_t;
#endif
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_timer1 _sifields._timer._timer1
#define si_timer2 _sifields._timer._timer2
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_DETHREAD -7 /* sent by execve() killing subsidiary threads */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
#ifndef HAVE_ARCH_SI_CODES
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
#endif
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#ifndef SIGEV_PAD_SIZE
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
#endif
#ifndef HAVE_ARCH_SIGEVENT_T
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#endif
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#ifndef HAVE_ARCH_COPY_SIGINFO
#include <linux/string.h>
static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(*to));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
#endif
extern int copy_siginfo_to_user(struct siginfo *to, struct siginfo *from);
#endif /* __KERNEL__ */
#endif
include/asm-i386/errno.h
View file @ f7e837b2
#ifndef _I386_ERRNO_H
#define _I386_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Argument list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#include <asm-generic/errno.h>
#endif
include/asm-i386/siginfo.h
View file @ f7e837b2
#ifndef _I386_SIGINFO_H
#define _I386_SIGINFO_H
#include <linux/types.h>
/* XXX: This structure was copied from the Alpha; is there an iBCS version? */
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
unsigned int _timer1;
unsigned int _timer2;
} _timer;
/* POSIX.1b signals */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
pid_t _pid; /* which child */
uid_t _uid; /* sender's uid */
int _status; /* exit code */
clock_t _utime;
clock_t _stime;
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void *_addr; /* faulting insn/memory ref. */
} _sigfault;
/* SIGPOLL */
struct {
int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_DETHREAD -7 /* sent by execve() killing subsidiary threads */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
static inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#include <asm-generic/siginfo.h>
#endif
include/asm-ia64/errno.h
View file @ f7e837b2
......@@ -8,132 +8,6 @@
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Argument list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#include <asm-generic/errno.h>
#endif /* _ASM_IA64_ERRNO_H */
include/asm-ia64/siginfo.h
View file @ f7e837b2
......@@ -6,15 +6,15 @@
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
#include <linux/types.h>
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 4)
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 4)
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define HAVE_ARCH_SIGINFO_T
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 4)
#define HAVE_ARCH_COPY_SIGINFO
#include <asm-generic/siginfo.h>
typedef struct siginfo {
int si_signo;
......@@ -75,18 +75,6 @@ typedef struct siginfo {
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_imm _sifields._sigfault._imm /* as per UNIX SysV ABI spec */
#define si_flags _sifields._sigfault._flags
/*
......@@ -94,8 +82,6 @@ typedef struct siginfo {
* si_code is non-zero and __ISR_VALID is set in si_flags.
*/
#define si_isr _sifields._sigfault._isr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#define si_pfm_ovfl _sifields._sigprof._pfm_ovfl_counters
/*
......@@ -109,155 +95,49 @@ typedef struct siginfo {
* Positive values for kernel-generated signals.
*/
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_PROF (6 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE (-1) /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ (-3) /* sent by real time mesq state change */
#define SI_ASYNCIO (-4) /* sent by AIO completion */
#define SI_SIGIO (-5) /* sent by queued SIGIO */
#define SI_TKILL (-6) /* sent by tkill system call */
#define SI_DETHREAD (-7) /* sent by execve() killing subsidiary threads */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define ILL_BADIADDR (__SI_FAULT|9) /* unimplemented instruction address */
#define __ILL_BREAK (__SI_FAULT|10) /* illegal break */
#define __ILL_BNDMOD (__SI_FAULT|11) /* bundle-update (modification) in progress */
#undef NSIGILL
#define NSIGILL 11
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define __FPE_DECOVF (__SI_FAULT|9) /* decimal overflow */
#define __FPE_DECDIV (__SI_FAULT|10) /* decimal division by zero */
#define __FPE_DECERR (__SI_FAULT|11) /* packed decimal error */
#define __FPE_INVASC (__SI_FAULT|12) /* invalid ASCII digit */
#define __FPE_INVDEC (__SI_FAULT|13) /* invalid decimal digit */
#undef NSIGFPE
#define NSIGFPE 13
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define __SEGV_PSTKOVF (__SI_FAULT|3) /* paragraph stack overflow */
#undef NSIGSEGV
#define NSIGSEGV 3
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */
#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint or watchpoint */
#undef NSIGTRAP
#define NSIGTRAP 4
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* SIGPROF si_codes
*/
#define PROF_OVFL (__SI_PROF|1) /* some counters overflowed */
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from userspace, libpthread
* transmuting it to SIGEV_SIGNAL, which the thread manager then catches and does the
* appropriate nonsense. However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 4)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
......@@ -268,11 +148,9 @@ copy_siginfo (siginfo_t *to, siginfo_t *from)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
memcpy(to, from, 4*sizeof(int) + sizeof(from->_sifields._sigchld));
}
#define HAVE_ARCH_COPY_SIGINFO_TO_USER
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
extern int copy_siginfo_from_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
......
include/asm-ia64/signal.h
View file @ f7e837b2
......@@ -166,6 +166,8 @@ struct k_sigaction {
# include <asm/sigcontext.h>
#define HAVE_ARCH_GET_SIGNAL_TO_DELIVER
#endif /* __KERNEL__ */
# endif /* !__ASSEMBLY__ */
......
include/asm-m68k/errno.h
View file @ f7e837b2
#ifndef _M68K_ERRNO_H
#define _M68K_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#include <asm-generic/errno.h>
#endif /* _M68K_ERRNO_H */
include/asm-m68k/siginfo.h
View file @ f7e837b2
#ifndef _M68K_SIGINFO_H
#define _M68K_SIGINFO_H
#include <linux/types.h>
#define HAVE_ARCH_SIGINFO_T
/* This is copied from asm-alpha/siginfo.h. */
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
#include <asm-generic/siginfo.h>
typedef struct siginfo {
int si_signo;
......@@ -70,174 +62,12 @@ typedef struct siginfo {
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#undef si_uid
#ifdef __KERNEL__
#define si_uid _sifields._kill._uid32
#define si_uid16 _sifields._kill._uid
#else
#define si_uid _sifields._kill._uid
#endif /* __KERNEL__ */
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
extern inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#endif
include/asm-m68k/signal.h
View file @ f7e837b2
......@@ -215,6 +215,8 @@ extern __inline__ int sigfindinword(unsigned long word)
return word ^ 31;
}
#define HAVE_ARCH_GET_SIGNAL_TO_DELIVER
#endif /* __KERNEL__ */
#endif /* _M68K_SIGNAL_H */
include/asm-mips/errno.h
View file @ f7e837b2
......@@ -11,40 +11,9 @@
/*
* These error numbers are intended to be MIPS ABI compatible
*/
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#include <asm-generic/errno-base.h>
#define ENOMSG 35 /* No message of desired type */
#define EIDRM 36 /* Identifier removed */
#define ECHRNG 37 /* Channel number out of range */
......
include/asm-mips/siginfo.h
View file @ f7e837b2
......@@ -9,21 +9,19 @@
#ifndef _ASM_SIGINFO_H
#define _ASM_SIGINFO_H
#include <linux/types.h>
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 4)
#define HAVE_ARCH_SIGINFO_T
#define HAVE_ARCH_SIGEVENT_T
/* This structure matches IRIX 32/n32 ABIs for binary compatibility. */
#include <asm-generic/siginfo.h>
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
/* The sigval union matches IRIX 32/n32 ABIs for binary compatibility. */
/* This structure matches IRIX 32/n32 ABIs for binary compatibility but
has Linux extensions. */
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef struct siginfo {
int si_signo;
int si_code;
......@@ -82,125 +80,16 @@ typedef struct siginfo {
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Again these have been choosen to be IRIX compatible.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#undef SI_ASYNCIO
#undef SI_TIMER
#undef SI_MESGQ
#define SI_ASYNCIO -2 /* sent by AIO completion */
#define SI_TIMER __SI_CODE(__SI_TIMER,-3) /* sent by timer expiration */
#define SI_MESGQ -4 /* sent by real time mesq state change */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
......@@ -210,14 +99,14 @@ typedef struct siginfo {
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#undef SIGEV_NONE
#undef SIGEV_SIGNAL
#undef SIGEV_THREAD
#define SIGEV_NONE 128 /* other notification: meaningless */
#define SIGEV_SIGNAL 129 /* notify via signal */
#define SIGEV_CALLBACK 130 /* ??? */
#define SIGEV_THREAD 131 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 4)
/* XXX This one isn't yet IRIX / ABI compatible. */
typedef struct sigevent {
int sigev_notify;
......@@ -233,23 +122,4 @@ typedef struct sigevent {
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
extern inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#endif /* _ASM_SIGINFO_H */
include/asm-mips64/errno.h
View file @ f7e837b2
......@@ -12,40 +12,9 @@
/*
* These error numbers are intended to be MIPS ABI compatible
*/
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#include <asm-generic/errno-base.h>
#define ENOMSG 35 /* No message of desired type */
#define EIDRM 36 /* Identifier removed */
#define ECHRNG 37 /* Channel number out of range */
......
include/asm-mips64/siginfo.h
View file @ f7e837b2
......@@ -9,21 +9,18 @@
#ifndef _ASM_SIGINFO_H
#define _ASM_SIGINFO_H
#include <linux/types.h>
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 4)
#define HAVE_ARCH_SIGINFO_T
#define HAVE_ARCH_SIGEVENT_T
/* This structure matches IRIX 32/n32 ABIs for binary compatibility. */
#include <asm-generic/siginfo.h>
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
/* The sigval union matches IRIX 32/n32 ABIs for binary compatibility. */
/* This structure matches IRIX 32/n32 ABIs for binary compatibility but
has Linux extensions. */
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef struct siginfo {
int si_signo;
int si_code;
......@@ -82,125 +79,16 @@ typedef struct siginfo {
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Again these have been choosen to be IRIX compatible.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#undef SI_ASYNCIO
#undef SI_TIMER
#undef SI_MESGQ
#define SI_ASYNCIO -2 /* sent by AIO completion */
#define SI_TIMER __SI_CODE(__SI_TIMER,-3) /* sent by timer expiration */
#define SI_MESGQ -4 /* sent by real time mesq state change */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
......@@ -210,14 +98,14 @@ typedef struct siginfo {
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#undef SIGEV_NONE
#undef SIGEV_SIGNAL
#undef SIGEV_THREAD
#define SIGEV_NONE 128 /* other notification: meaningless */
#define SIGEV_SIGNAL 129 /* notify via signal */
#define SIGEV_CALLBACK 130 /* ??? */
#define SIGEV_THREAD 131 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 4)
/* XXX This one isn't yet IRIX / ABI compatible. */
typedef struct sigevent {
int sigev_notify;
......@@ -233,24 +121,4 @@ typedef struct sigevent {
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
extern inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
#define HAVE_ARCH_COPY_SIGINFO_TO_USER
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#endif /* _ASM_SIGINFO_H */
include/asm-parisc/errno.h
View file @ f7e837b2
#ifndef _PARISC_ERRNO_H
#define _PARISC_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#include <asm-generic/errno-base.h>
#define ENOMSG 35 /* No message of desired type */
#define EIDRM 36 /* Identifier removed */
#define ECHRNG 37 /* Channel number out of range */
......
include/asm-parisc/siginfo.h
View file @ f7e837b2
#ifndef _PARISC_SIGINFO_H
#define _PARISC_SIGINFO_H
#include <linux/types.h>
/* XXX: This structure was copied from the Alpha; is there an iBCS version? */
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
unsigned int _timer1;
unsigned int _timer2;
} _timer;
/* POSIX.1b signals */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
pid_t _pid; /* which child */
uid_t _uid; /* sender's uid */
int _status; /* exit code */
clock_t _utime;
clock_t _stime;
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void *_addr; /* faulting insn/memory ref. */
} _sigfault;
/* SIGPOLL */
struct {
int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
#include <asm-generic/siginfo.h>
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */
#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint or watchpoint */
#undef NSIGTRAP
#define NSIGTRAP 4
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
extern inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
#define HAVE_ARCH_COPY_SIGINFO_TO_USER
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#endif
include/asm-ppc/errno.h
View file @ f7e837b2
......@@ -4,131 +4,10 @@
#ifndef _PPC_ERRNO_H
#define _PPC_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK 58 /* File locking deadlock error */
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#include <asm-generic/errno.h>
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#undef EDEADLOCK
#define EDEADLOCK 58 /* File locking deadlock error */
/* Should never be seen by user programs */
#define ERESTARTSYS 512
......
include/asm-ppc/siginfo.h
View file @ f7e837b2
......@@ -4,231 +4,6 @@
#ifndef _PPC_SIGINFO_H
#define _PPC_SIGINFO_H
/* Copied from i386 from alpha. */
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
unsigned int _timer1;
unsigned int _timer2;
} _timer;
/* POSIX.1b signals */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
pid_t _pid; /* which child */
uid_t _uid; /* sender's uid */
int _status; /* exit code */
clock_t _utime;
clock_t _stime;
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void *_addr; /* faulting insn/memory ref. */
} _sigfault;
/* SIGPOLL */
struct {
int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_DETHREAD -7 /* sent by execve() killing subsidiary threads */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
extern inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#include <asm-generic/siginfo.h>
#endif
include/asm-ppc64/errno.h
View file @ f7e837b2
......@@ -8,131 +8,10 @@
* 2 of the License, or (at your option) any later version.
*/
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK 58 /* File locking deadlock error */
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#include <asm-generic/errno.h>
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#undef EDEADLOCK
#define EDEADLOCK 58 /* File locking deadlock error */
/* Should never be seen by user programs */
#define ERESTARTSYS 512
......
include/asm-ppc64/siginfo.h
View file @ f7e837b2
......@@ -8,232 +8,6 @@
* 2 of the License, or (at your option) any later version.
*/
#include <linux/types.h>
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
unsigned int _timer1;
unsigned int _timer2;
} _timer;
/* POSIX.1b signals */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
pid_t _pid; /* which child */
uid_t _uid; /* sender's uid */
int _status; /* exit code */
clock_t _utime;
clock_t _stime;
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void *_addr; /* faulting insn/memory ref. */
} _sigfault;
/* SIGPOLL */
struct {
int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_DETHREAD -7 /* sent by execve() killing subsidiary threads */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
static inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#include <asm-generic/siginfo.h>
#endif /* _PPC64_SIGINFO_H */
include/asm-s390/errno.h
View file @ f7e837b2
......@@ -3,138 +3,11 @@
*
* S390 version
*
* Derived from "include/asm-i386/errno.h"
*/
#ifndef _S390_ERRNO_H
#define _S390_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#include <asm-generic/errno.h>
#endif
include/asm-s390/siginfo.h
View file @ f7e837b2
......@@ -9,116 +9,16 @@
#ifndef _S390_SIGINFO_H
#define _S390_SIGINFO_H
#include <linux/types.h>
#define HAVE_ARCH_SI_CODES
/* XXX: This structure was copied from the Alpha; is there an iBCS version? */
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
unsigned int _timer1;
unsigned int _timer2;
} _timer;
/* POSIX.1b signals */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
pid_t _pid; /* which child */
uid_t _uid; /* sender's uid */
int _status; /* exit code */
clock_t _utime;
clock_t _stime;
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void *_addr; /* faulting insn/memory ref. */
} _sigfault;
/* SIGPOLL */
struct {
int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
#include <asm-generic/siginfo.h>
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#undef SI_TIMER
#define SI_TIMER -2 /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
......@@ -177,7 +77,7 @@ typedef struct siginfo {
#define CLD_TRAPPED 4 /* traced child has trapped */
#define CLD_STOPPED 5 /* child has stopped */
#define CLD_CONTINUED 6 /* stopped child has continued */
#define NSIGCHLD
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
......@@ -190,52 +90,4 @@ typedef struct siginfo {
#define POLL_HUP 6 /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
extern inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#endif
include/asm-s390x/errno.h
View file @ f7e837b2
......@@ -2,139 +2,11 @@
* include/asm-s390/errno.h
*
* S390 version
*
* Derived from "include/asm-i386/errno.h"
*/
#ifndef _S390_ERRNO_H
#define _S390_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#include <asm-generic/errno.h>
#endif
include/asm-s390x/siginfo.h
View file @ f7e837b2
......@@ -9,116 +9,16 @@
#ifndef _S390_SIGINFO_H
#define _S390_SIGINFO_H
#include <linux/types.h>
#define HAVE_ARCH_SI_CODES
/* XXX: This structure was copied from the Alpha; is there an iBCS version? */
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
unsigned int _timer1;
unsigned int _timer2;
} _timer;
/* POSIX.1b signals */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
pid_t _pid; /* which child */
uid_t _uid; /* sender's uid */
int _status; /* exit code */
clock_t _utime;
clock_t _stime;
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void *_addr; /* faulting insn/memory ref. */
} _sigfault;
/* SIGPOLL */
struct {
int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
#include <asm-generic/siginfo.h>
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#undef SI_TIMER
#define SI_TIMER -2 /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
......@@ -177,7 +77,7 @@ typedef struct siginfo {
#define CLD_TRAPPED 4 /* traced child has trapped */
#define CLD_STOPPED 5 /* child has stopped */
#define CLD_CONTINUED 6 /* stopped child has continued */
#define NSIGCHLD
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
......@@ -190,52 +90,4 @@ typedef struct siginfo {
#define POLL_HUP 6 /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
extern inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#endif
include/asm-sh/errno.h
View file @ f7e837b2
#ifndef __ASM_SH_ERRNO_H
#define __ASM_SH_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#include <asm-generic/errno.h>
#endif /* __ASM_SH_ERRNO_H */
include/asm-sh/siginfo.h
View file @ f7e837b2
#ifndef __ASM_SH_SIGINFO_H
#define __ASM_SH_SIGINFO_H
#include <linux/types.h>
/* XXX: This structure was copied from the Alpha; is there an iBCS version? */
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
unsigned int _timer1;
unsigned int _timer2;
} _timer;
/* POSIX.1b signals */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
pid_t _pid; /* which child */
uid_t _uid; /* sender's uid */
int _status; /* exit code */
clock_t _utime;
clock_t _stime;
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void *_addr; /* faulting insn/memory ref. */
} _sigfault;
/* SIGPOLL */
struct {
int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
static inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#include <asm-generic/siginfo.h>
#endif /* __ASM_SH_SIGINFO_H */
include/asm-sparc/errno.h
View file @ f7e837b2
......@@ -3,40 +3,9 @@
#define _SPARC_ERRNO_H
/* These match the SunOS error numbering scheme. */
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#include <asm-generic/errno-base.h>
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define EINPROGRESS 36 /* Operation now in progress */
#define EALREADY 37 /* Operation already in progress */
......
include/asm-sparc/siginfo.h
View file @ f7e837b2
......@@ -5,15 +5,10 @@
#ifndef _SPARC_SIGINFO_H
#define _SPARC_SIGINFO_H
#include <linux/types.h>
#define HAVE_ARCH_SIGINFO_T
#define HAVE_ARCH_COPY_SIGINFO
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
#include <asm-generic/siginfo.h>
typedef struct siginfo {
int si_signo;
......@@ -65,128 +60,9 @@ typedef struct siginfo {
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_trapno _sifields._sigfault._trapno
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_NOINFO 32767 /* no information in siginfo_t */
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_DETHREAD -7 /* sent by execve() killing subsidiary threads */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* SIGEMT si_codes
......@@ -194,35 +70,6 @@ typedef struct siginfo {
#define EMT_TAGOVF (__SI_FAULT|1) /* tag overflow */
#define NSIGEMT 1
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#ifdef __KERNEL__
#include <linux/string.h>
......@@ -236,12 +83,6 @@ extern inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
#define HAVE_ARCH_COPY_SIGINFO_TO_USER
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#endif /* !(_SPARC_SIGINFO_H) */
include/asm-sparc/signal.h
View file @ f7e837b2
......@@ -216,6 +216,8 @@ typedef struct sigaltstack {
size_t ss_size;
} stack_t;
#define HAVE_ARCH_GET_SIGNAL_TO_DELIVER
#endif /* !(__ASSEMBLY__) */
#endif /* !(_ASMSPARC_SIGNAL_H) */
include/asm-sparc64/errno.h
View file @ f7e837b2
......@@ -3,40 +3,9 @@
#define _SPARC64_ERRNO_H
/* These match the SunOS error numbering scheme. */
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#include <asm-generic/errno-base.h>
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define EINPROGRESS 36 /* Operation now in progress */
#define EALREADY 37 /* Operation already in progress */
......
include/asm-sparc64/siginfo.h
View file @ f7e837b2
#ifndef _SPARC64_SIGINFO_H
#define _SPARC64_SIGINFO_H
#include <linux/types.h>
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 4)
#define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 4)
#define SIGEV_PAD_SIZE32 ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
#define HAVE_ARCH_SIGINFO_T
#define HAVE_ARCH_COPY_SIGINFO
#include <asm-generic/siginfo.h>
#ifdef __KERNEL__
......@@ -17,10 +22,6 @@ typedef union sigval32 {
#endif /* __KERNEL__ */
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 4)
#define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef struct siginfo {
int si_signo;
int si_errno;
......@@ -125,128 +126,9 @@ typedef struct siginfo32 {
#endif /* __KERNEL__ */
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_trapno _sifields._sigfault._trapno
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
*/
#define SI_NOINFO 32767 /* no information in siginfo_t */
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_DETHREAD -7 /* sent by execve() killing subsidiary threads */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* SIGEMT si_codes
......@@ -254,36 +136,6 @@ typedef struct siginfo32 {
#define EMT_TAGOVF (__SI_FAULT|1) /* tag overflow */
#define NSIGEMT 1
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 4)
#define SIGEV_PAD_SIZE32 ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#ifdef __KERNEL__
typedef struct sigevent32 {
......@@ -311,13 +163,8 @@ extern inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
memcpy(to, from, 4*sizeof(int) + sizeof(from->_sifields._sigchld));
}
#define HAVE_ARCH_COPY_SIGINFO_TO_USER
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
extern int copy_siginfo_to_user32(siginfo_t32 *to, siginfo_t *from);
#endif /* __KERNEL__ */
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#endif
include/asm-sparc64/signal.h
View file @ f7e837b2
......@@ -252,6 +252,9 @@ typedef struct sigaltstack32 {
int ss_flags;
__kernel_size_t32 ss_size;
} stack_t32;
#define HAVE_ARCH_GET_SIGNAL_TO_DELIVER
#endif
#endif /* !(__ASSEMBLY__) */
......
include/asm-x86_64/errno.h
View file @ f7e837b2
#ifndef _X8664_ERRNO_H
#define _X8664_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#include <asm-generic/errno.h>
#endif
include/asm-x86_64/siginfo.h
View file @ f7e837b2
#ifndef _X8664_SIGINFO_H
#define _X8664_SIGINFO_H
#include <linux/types.h>
typedef union sigval {
int sival_int;
void *sival_ptr;
} sigval_t;
#define SI_MAX_SIZE 128
#define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int)) - 3)
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
unsigned int _timer1;
unsigned int _timer2;
} _timer;
/* POSIX.1b signals */
struct {
pid_t _pid; /* sender's pid */
uid_t _uid; /* sender's uid */
sigval_t _sigval;
} _rt;
/* SIGCHLD */
struct {
pid_t _pid; /* which child */
uid_t _uid; /* sender's uid */
int _status; /* exit code */
clock_t _utime;
clock_t _stime;
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void *_addr; /* faulting insn/memory ref. */
} _sigfault;
/* SIGPOLL */
struct {
int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
} _sifields;
} siginfo_t;
/*
* How these fields are to be accessed.
*/
#define si_pid _sifields._kill._pid
#define si_uid _sifields._kill._uid
#define si_status _sifields._sigchld._status
#define si_utime _sifields._sigchld._utime
#define si_stime _sifields._sigchld._stime
#define si_value _sifields._rt._sigval
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#ifdef __KERNEL__
#define __SI_MASK 0xffff0000
#define __SI_KILL (0 << 16)
#define __SI_TIMER (1 << 16)
#define __SI_POLL (2 << 16)
#define __SI_FAULT (3 << 16)
#define __SI_CHLD (4 << 16)
#define __SI_RT (5 << 16)
#define __SI_CODE(T,N) ((T) << 16 | ((N) & 0xffff))
#else
#define __SI_KILL 0
#define __SI_TIMER 0
#define __SI_POLL 0
#define __SI_FAULT 0
#define __SI_CHLD 0
#define __SI_RT 0
#define __SI_CODE(T,N) (N)
#endif
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
* ... And Linux ignores that convention -AK.
*/
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_DETHREAD -7 /* sent by execve() killing subsidiary thread */
#define SI_FROMUSER(siptr) ((siptr)->si_code <= 0)
#define SI_FROMKERNEL(siptr) ((siptr)->si_code > 0)
/*
* SIGILL si_codes
*/
#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
#define NSIGSEGV 2
/*
* SIGBUS si_codes
*/
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
#define NSIGBUS 3
/*
* SIGTRAP si_codes
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define NSIGTRAP 2
/*
* SIGCHLD si_codes
*/
#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
#define POLL_MSG (__SI_POLL|3) /* input message available */
#define POLL_ERR (__SI_POLL|4) /* i/o error */
#define POLL_PRI (__SI_POLL|5) /* high priority input available */
#define POLL_HUP (__SI_POLL|6) /* device disconnected */
#define NSIGPOLL 6
/*
* sigevent definitions
*
* It seems likely that SIGEV_THREAD will have to be handled from
* userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
* thread manager then catches and does the appropriate nonsense.
* However, everything is written out here so as to not get lost.
*/
#define SIGEV_SIGNAL 0 /* notify via signal */
#define SIGEV_NONE 1 /* other notification: meaningless */
#define SIGEV_THREAD 2 /* deliver via thread creation */
#define SIGEV_MAX_SIZE 64
#define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int)) - 3)
typedef struct sigevent {
sigval_t sigev_value;
int sigev_signo;
int sigev_notify;
union {
int _pad[SIGEV_PAD_SIZE];
struct {
void (*_function)(sigval_t);
void *_attribute; /* really pthread_attr_t */
} _sigev_thread;
} _sigev_un;
} sigevent_t;
#define sigev_notify_function _sigev_un._sigev_thread._function
#define sigev_notify_attributes _sigev_un._sigev_thread._attribute
#ifdef __KERNEL__
#include <linux/string.h>
extern inline void copy_siginfo(siginfo_t *to, siginfo_t *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(siginfo_t));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
extern int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from);
#endif /* __KERNEL__ */
#include <asm-generic/siginfo.h>
#endif
include/linux/signal.h
View file @ f7e837b2
......@@ -220,6 +220,10 @@ static inline void init_sigpending(struct sigpending *sig)
extern long do_sigpending(void *, unsigned long);
#ifndef HAVE_ARCH_GET_SIGNAL_TO_DELIVER
extern int get_signal_to_deliver(siginfo_t *info, struct pt_regs *regs);
#endif
#endif /* __KERNEL__ */
#endif /* _LINUX_SIGNAL_H */
kernel/signal.c
View file @ f7e837b2
......@@ -14,6 +14,8 @@
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/tty.h>
#include <linux/binfmts.h>
#include <asm/uaccess.h>
#include <asm/siginfo.h>
......@@ -825,6 +827,110 @@ notify_parent(struct task_struct *tsk, int sig)
read_unlock(&tasklist_lock);
}
#ifndef HAVE_ARCH_GET_SIGNAL_TO_DELIVER
int get_signal_to_deliver(siginfo_t *info, struct pt_regs *regs)
{
for (;;) {
unsigned long signr;
struct k_sigaction *ka;
spin_lock_irq(&current->sigmask_lock);
signr = dequeue_signal(&current->blocked, info);
spin_unlock_irq(&current->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
set_current_state(TASK_STOPPED);
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
signr = current->exit_code;
if (signr == 0)
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info->si_signo) {
info->si_signo = signr;
info->si_errno = 0;
info->si_code = SI_USER;
info->si_pid = current->parent->pid;
info->si_uid = current->parent->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(&current->blocked, signr)) {
send_sig_info(signr, info, current);
continue;
}
}
ka = &current->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP: {
struct signal_struct *sig;
set_current_state(TASK_STOPPED);
current->exit_code = signr;
sig = current->parent->sig;
if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
}
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, info);
/* NOTREACHED */
}
}
return signr;
}
return 0;
}
#endif
EXPORT_SYMBOL(dequeue_signal);
EXPORT_SYMBOL(flush_signals);
EXPORT_SYMBOL(force_sig);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7