Commit f8240835 authored by Akash Goel's avatar Akash Goel Committed by Tvrtko Ursulin

drm/i915: Add a relay backed debugfs interface for capturing GuC logs

Added a new debugfs interface '/sys/kernel/debug/dri/guc_log' for the
User to capture GuC firmware logs. Availed relay framework to implement
the interface, where Driver will have to just use a relay API to store
snapshots of the GuC log buffer in the buffer managed by relay.
The snapshot will be taken when GuC firmware sends a log buffer flush
interrupt and up to four snapshots could be stored in the relay buffer.
The relay buffer will be operated in a mode where it will overwrite the
data not yet collected by User.
Besides mmap method, through which User can directly access the relay
buffer contents, relay also supports the 'poll' method. Through the 'poll'
call on log file, User can come to know whenever a new snapshot of the
log buffer is taken by Driver, so can run in tandem with the Driver and
capture the logs in a sustained/streaming manner, without any loss of data.

v2: Defer the creation of relay channel & associated debugfs file, as
    debugfs setup is now done at the end of i915 Driver load. (Chris)

v3:
- Switch to no-overwrite mode for relay.
- Fix the relay sub buffer switching sequence.

v4:
- Update i915 Kconfig to select RELAY config. (TvrtKo)
- Log a message when there is no sub buffer available to capture
  the GuC log buffer. (Tvrtko)
- Increase the number of relay sub buffers to 8 from 4, to have
  sufficient buffering for boot time logs

v5:
- Fix the alignment, indentation issues and some minor cleanup. (Tvrtko)
- Update the comment to elaborate on why a relay channel has to be
  associated with the debugfs file. (Tvrtko)

v6:
- Move the write to 'is_global' after the NULL check on parent directory
  dentry pointer. (Tvrtko)

v7: Add a BUG_ON to validate relay buffer allocation size. (Chris)

Testcase: igt/tools/intel_guc_logger
Suggested-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: default avatarSourab Gupta <sourab.gupta@intel.com>
Signed-off-by: default avatarAkash Goel <akash.goel@intel.com>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
parent 4100b2ab
...@@ -11,6 +11,7 @@ config DRM_I915 ...@@ -11,6 +11,7 @@ config DRM_I915
select DRM_KMS_HELPER select DRM_KMS_HELPER
select DRM_PANEL select DRM_PANEL
select DRM_MIPI_DSI select DRM_MIPI_DSI
select RELAY
# i915 depends on ACPI_VIDEO when ACPI is enabled # i915 depends on ACPI_VIDEO when ACPI is enabled
# but for select to work, need to select ACPI_VIDEO's dependencies, ick # but for select to work, need to select ACPI_VIDEO's dependencies, ick
select BACKLIGHT_LCD_SUPPORT if ACPI select BACKLIGHT_LCD_SUPPORT if ACPI
......
...@@ -1111,6 +1111,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv) ...@@ -1111,6 +1111,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
/* Reveal our presence to userspace */ /* Reveal our presence to userspace */
if (drm_dev_register(dev, 0) == 0) { if (drm_dev_register(dev, 0) == 0) {
i915_debugfs_register(dev_priv); i915_debugfs_register(dev_priv);
i915_guc_register(dev_priv);
i915_setup_sysfs(dev_priv); i915_setup_sysfs(dev_priv);
} else } else
DRM_ERROR("Failed to register driver for userspace access!\n"); DRM_ERROR("Failed to register driver for userspace access!\n");
...@@ -1149,6 +1150,7 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv) ...@@ -1149,6 +1150,7 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
intel_opregion_unregister(dev_priv); intel_opregion_unregister(dev_priv);
i915_teardown_sysfs(dev_priv); i915_teardown_sysfs(dev_priv);
i915_guc_unregister(dev_priv);
i915_debugfs_unregister(dev_priv); i915_debugfs_unregister(dev_priv);
drm_dev_unregister(&dev_priv->drm); drm_dev_unregister(&dev_priv->drm);
......
...@@ -23,6 +23,8 @@ ...@@ -23,6 +23,8 @@
*/ */
#include <linux/firmware.h> #include <linux/firmware.h>
#include <linux/circ_buf.h> #include <linux/circ_buf.h>
#include <linux/debugfs.h>
#include <linux/relay.h>
#include "i915_drv.h" #include "i915_drv.h"
#include "intel_guc.h" #include "intel_guc.h"
...@@ -856,13 +858,160 @@ guc_client_alloc(struct drm_i915_private *dev_priv, ...@@ -856,13 +858,160 @@ guc_client_alloc(struct drm_i915_private *dev_priv,
return NULL; return NULL;
} }
/*
* Sub buffer switch callback. Called whenever relay has to switch to a new
* sub buffer, relay stays on the same sub buffer if 0 is returned.
*/
static int subbuf_start_callback(struct rchan_buf *buf,
void *subbuf,
void *prev_subbuf,
size_t prev_padding)
{
/* Use no-overwrite mode by default, where relay will stop accepting
* new data if there are no empty sub buffers left.
* There is no strict synchronization enforced by relay between Consumer
* and Producer. In overwrite mode, there is a possibility of getting
* inconsistent/garbled data, the producer could be writing on to the
* same sub buffer from which Consumer is reading. This can't be avoided
* unless Consumer is fast enough and can always run in tandem with
* Producer.
*/
if (relay_buf_full(buf))
return 0;
return 1;
}
/*
* file_create() callback. Creates relay file in debugfs.
*/
static struct dentry *create_buf_file_callback(const char *filename,
struct dentry *parent,
umode_t mode,
struct rchan_buf *buf,
int *is_global)
{
struct dentry *buf_file;
if (!parent)
return NULL;
/* This to enable the use of a single buffer for the relay channel and
* correspondingly have a single file exposed to User, through which
* it can collect the logs in order without any post-processing.
*/
*is_global = 1;
/* Not using the channel filename passed as an argument, since for each
* channel relay appends the corresponding CPU number to the filename
* passed in relay_open(). This should be fine as relay just needs a
* dentry of the file associated with the channel buffer and that file's
* name need not be same as the filename passed as an argument.
*/
buf_file = debugfs_create_file("guc_log", mode,
parent, buf, &relay_file_operations);
return buf_file;
}
/*
* file_remove() default callback. Removes relay file in debugfs.
*/
static int remove_buf_file_callback(struct dentry *dentry)
{
debugfs_remove(dentry);
return 0;
}
/* relay channel callbacks */
static struct rchan_callbacks relay_callbacks = {
.subbuf_start = subbuf_start_callback,
.create_buf_file = create_buf_file_callback,
.remove_buf_file = remove_buf_file_callback,
};
static void guc_log_remove_relay_file(struct intel_guc *guc)
{
relay_close(guc->log.relay_chan);
}
static int guc_log_create_relay_file(struct intel_guc *guc)
{
struct drm_i915_private *dev_priv = guc_to_i915(guc);
struct rchan *guc_log_relay_chan;
struct dentry *log_dir;
size_t n_subbufs, subbuf_size;
/* For now create the log file in /sys/kernel/debug/dri/0 dir */
log_dir = dev_priv->drm.primary->debugfs_root;
/* If /sys/kernel/debug/dri/0 location do not exist, then debugfs is
* not mounted and so can't create the relay file.
* The relay API seems to fit well with debugfs only, for availing relay
* there are 3 requirements which can be met for debugfs file only in a
* straightforward/clean manner :-
* i) Need the associated dentry pointer of the file, while opening the
* relay channel.
* ii) Should be able to use 'relay_file_operations' fops for the file.
* iii) Set the 'i_private' field of file's inode to the pointer of
* relay channel buffer.
*/
if (!log_dir) {
DRM_ERROR("Debugfs dir not available yet for GuC log file\n");
return -ENODEV;
}
/* Keep the size of sub buffers same as shared log buffer */
subbuf_size = guc->log.vma->obj->base.size;
/* Store up to 8 snapshots, which is large enough to buffer sufficient
* boot time logs and provides enough leeway to User, in terms of
* latency, for consuming the logs from relay. Also doesn't take
* up too much memory.
*/
n_subbufs = 8;
guc_log_relay_chan = relay_open("guc_log", log_dir, subbuf_size,
n_subbufs, &relay_callbacks, dev_priv);
if (!guc_log_relay_chan) {
DRM_ERROR("Couldn't create relay chan for GuC logging\n");
return -ENOMEM;
}
GEM_BUG_ON(guc_log_relay_chan->subbuf_size < subbuf_size);
/* FIXME: Cover the update under a lock ? */
guc->log.relay_chan = guc_log_relay_chan;
return 0;
}
static void guc_move_to_next_buf(struct intel_guc *guc) static void guc_move_to_next_buf(struct intel_guc *guc)
{ {
/* Make sure the updates made in the sub buffer are visible when
* Consumer sees the following update to offset inside the sub buffer.
*/
smp_wmb();
/* All data has been written, so now move the offset of sub buffer. */
relay_reserve(guc->log.relay_chan, guc->log.vma->obj->base.size);
/* Switch to the next sub buffer */
relay_flush(guc->log.relay_chan);
} }
static void *guc_get_write_buffer(struct intel_guc *guc) static void *guc_get_write_buffer(struct intel_guc *guc)
{ {
/* FIXME: Cover the check under a lock ? */
if (!guc->log.relay_chan)
return NULL; return NULL;
/* Just get the base address of a new sub buffer and copy data into it
* ourselves. NULL will be returned in no-overwrite mode, if all sub
* buffers are full. Could have used the relay_write() to indirectly
* copy the data, but that would have been bit convoluted, as we need to
* write to only certain locations inside a sub buffer which cannot be
* done without using relay_reserve() along with relay_write(). So its
* better to use relay_reserve() alone.
*/
return relay_reserve(guc->log.relay_chan, 0);
} }
static unsigned int guc_get_log_buffer_size(enum guc_log_buffer_type type) static unsigned int guc_get_log_buffer_size(enum guc_log_buffer_type type)
...@@ -943,6 +1092,12 @@ static void guc_read_update_log_buffer(struct intel_guc *guc) ...@@ -943,6 +1092,12 @@ static void guc_read_update_log_buffer(struct intel_guc *guc)
if (log_buf_snapshot_state) if (log_buf_snapshot_state)
guc_move_to_next_buf(guc); guc_move_to_next_buf(guc);
else {
/* Used rate limited to avoid deluge of messages, logs might be
* getting consumed by User at a slow rate.
*/
DRM_ERROR_RATELIMITED("no sub-buffer to capture logs\n");
}
} }
static void guc_capture_logs_work(struct work_struct *work) static void guc_capture_logs_work(struct work_struct *work)
...@@ -967,6 +1122,11 @@ static void guc_log_cleanup(struct intel_guc *guc) ...@@ -967,6 +1122,11 @@ static void guc_log_cleanup(struct intel_guc *guc)
guc->log.flush_wq = NULL; guc->log.flush_wq = NULL;
if (guc->log.relay_chan)
guc_log_remove_relay_file(guc);
guc->log.relay_chan = NULL;
if (guc->log.buf_addr) if (guc->log.buf_addr)
i915_gem_object_unpin_map(guc->log.vma->obj); i915_gem_object_unpin_map(guc->log.vma->obj);
...@@ -1057,6 +1217,36 @@ static void guc_log_create(struct intel_guc *guc) ...@@ -1057,6 +1217,36 @@ static void guc_log_create(struct intel_guc *guc)
guc->log.flags = (offset << GUC_LOG_BUF_ADDR_SHIFT) | flags; guc->log.flags = (offset << GUC_LOG_BUF_ADDR_SHIFT) | flags;
} }
static int guc_log_late_setup(struct intel_guc *guc)
{
struct drm_i915_private *dev_priv = guc_to_i915(guc);
int ret;
lockdep_assert_held(&dev_priv->drm.struct_mutex);
if (i915.guc_log_level < 0)
return -EINVAL;
/* If log_level was set as -1 at boot time, then setup needed to
* handle log buffer flush interrupts would not have been done yet,
* so do that now.
*/
ret = guc_log_create_extras(guc);
if (ret)
goto err;
ret = guc_log_create_relay_file(guc);
if (ret)
goto err;
return 0;
err:
guc_log_cleanup(guc);
/* logging will remain off */
i915.guc_log_level = -1;
return ret;
}
static void guc_policies_init(struct guc_policies *policies) static void guc_policies_init(struct guc_policies *policies)
{ {
struct guc_policy *policy; struct guc_policy *policy;
...@@ -1238,7 +1428,6 @@ void i915_guc_submission_fini(struct drm_i915_private *dev_priv) ...@@ -1238,7 +1428,6 @@ void i915_guc_submission_fini(struct drm_i915_private *dev_priv)
struct intel_guc *guc = &dev_priv->guc; struct intel_guc *guc = &dev_priv->guc;
i915_vma_unpin_and_release(&guc->ads_vma); i915_vma_unpin_and_release(&guc->ads_vma);
guc_log_cleanup(guc);
i915_vma_unpin_and_release(&guc->log.vma); i915_vma_unpin_and_release(&guc->log.vma);
if (guc->ctx_pool_vma) if (guc->ctx_pool_vma)
...@@ -1312,3 +1501,23 @@ void i915_guc_capture_logs(struct drm_i915_private *dev_priv) ...@@ -1312,3 +1501,23 @@ void i915_guc_capture_logs(struct drm_i915_private *dev_priv)
host2guc_logbuffer_flush_complete(&dev_priv->guc); host2guc_logbuffer_flush_complete(&dev_priv->guc);
intel_runtime_pm_put(dev_priv); intel_runtime_pm_put(dev_priv);
} }
void i915_guc_unregister(struct drm_i915_private *dev_priv)
{
if (!i915.enable_guc_submission)
return;
mutex_lock(&dev_priv->drm.struct_mutex);
guc_log_cleanup(&dev_priv->guc);
mutex_unlock(&dev_priv->drm.struct_mutex);
}
void i915_guc_register(struct drm_i915_private *dev_priv)
{
if (!i915.enable_guc_submission)
return;
mutex_lock(&dev_priv->drm.struct_mutex);
guc_log_late_setup(&dev_priv->guc);
mutex_unlock(&dev_priv->drm.struct_mutex);
}
...@@ -129,6 +129,7 @@ struct intel_guc_log { ...@@ -129,6 +129,7 @@ struct intel_guc_log {
void *buf_addr; void *buf_addr;
struct workqueue_struct *flush_wq; struct workqueue_struct *flush_wq;
struct work_struct flush_work; struct work_struct flush_work;
struct rchan *relay_chan;
}; };
struct intel_guc { struct intel_guc {
...@@ -174,5 +175,7 @@ void i915_guc_wq_unreserve(struct drm_i915_gem_request *request); ...@@ -174,5 +175,7 @@ void i915_guc_wq_unreserve(struct drm_i915_gem_request *request);
void i915_guc_submission_disable(struct drm_i915_private *dev_priv); void i915_guc_submission_disable(struct drm_i915_private *dev_priv);
void i915_guc_submission_fini(struct drm_i915_private *dev_priv); void i915_guc_submission_fini(struct drm_i915_private *dev_priv);
void i915_guc_capture_logs(struct drm_i915_private *dev_priv); void i915_guc_capture_logs(struct drm_i915_private *dev_priv);
void i915_guc_register(struct drm_i915_private *dev_priv);
void i915_guc_unregister(struct drm_i915_private *dev_priv);
#endif #endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment