enic: Check firmware capability before issuing firmware commands

Check if firmware supports a particular command by first checking capability
using devcmd CMD_CAPABILITY.
Signed-off-by: Neel Patel <neepatel@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Nishank Trivedi <nistrive@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/cisco/enic/enic.h

@@ -32,7 +32,7 @@
 
 #define DRV_NAME		"enic"
 #define DRV_DESCRIPTION		"Cisco VIC Ethernet NIC Driver"
-#define DRV_VERSION		"2.1.1.32"
+#define DRV_VERSION		"2.1.1.33"
 #define DRV_COPYRIGHT		"Copyright 2008-2011 Cisco Systems, Inc"
 
 #define ENIC_BARS_MAX		6

drivers/net/ethernet/cisco/enic/vnic_dev.c

@@ -439,12 +439,13 @@ int vnic_dev_fw_info(struct vnic_dev *vdev,
 		a1 = sizeof(struct vnic_devcmd_fw_info);
 
 		/* only get fw_info once and cache it */
-		err = vnic_dev_cmd(vdev, CMD_MCPU_FW_INFO, &a0, &a1, wait);
-		if (err == ERR_ECMDUNKNOWN) {
+		if (vnic_dev_capable(vdev, CMD_MCPU_FW_INFO))
+			err = vnic_dev_cmd(vdev, CMD_MCPU_FW_INFO,
+				&a0, &a1, wait);
+		else
 			err = vnic_dev_cmd(vdev, CMD_MCPU_FW_INFO_OLD,
 				&a0, &a1, wait);
 	}
-	}
 
 	*fw_info = vdev->fw_info;
 
@@ -504,13 +505,11 @@ int vnic_dev_enable_wait(struct vnic_dev *vdev)
 {
 	u64 a0 = 0, a1 = 0;
 	int wait = 1000;
-	int err;
 
-	err = vnic_dev_cmd(vdev, CMD_ENABLE_WAIT, &a0, &a1, wait);
-	if (err == ERR_ECMDUNKNOWN)
+	if (vnic_dev_capable(vdev, CMD_ENABLE_WAIT))
+		return vnic_dev_cmd(vdev, CMD_ENABLE_WAIT, &a0, &a1, wait);
+	else
 		return vnic_dev_cmd(vdev, CMD_ENABLE, &a0, &a1, wait);
-
-	return err;
 }
 
 int vnic_dev_disable(struct vnic_dev *vdev)
@@ -574,16 +573,15 @@ int vnic_dev_hang_reset(struct vnic_dev *vdev, int arg)
 	int wait = 1000;
 	int err;
 
-	err = vnic_dev_cmd(vdev, CMD_HANG_RESET, &a0, &a1, wait);
-	if (err == ERR_ECMDUNKNOWN) {
+	if (vnic_dev_capable(vdev, CMD_HANG_RESET)) {
+		return vnic_dev_cmd(vdev, CMD_HANG_RESET,
+				&a0, &a1, wait);
+	} else {
 		err = vnic_dev_soft_reset(vdev, arg);
 		if (err)
 			return err;
-
 		return vnic_dev_init(vdev, 0);
 	}
-
-	return err;
 }
 
 int vnic_dev_hang_reset_done(struct vnic_dev *vdev, int *done)
@@ -594,11 +592,13 @@ int vnic_dev_hang_reset_done(struct vnic_dev *vdev, int *done)
 
 	*done = 0;
 
-	err = vnic_dev_cmd(vdev, CMD_HANG_RESET_STATUS, &a0, &a1, wait);
-	if (err) {
-		if (err == ERR_ECMDUNKNOWN)
-			return vnic_dev_soft_reset_done(vdev, done);
+	if (vnic_dev_capable(vdev, CMD_HANG_RESET_STATUS)) {
+		err = vnic_dev_cmd(vdev, CMD_HANG_RESET_STATUS,
+				&a0, &a1, wait);
+		if (err)
 			return err;
+	} else {
+		return vnic_dev_soft_reset_done(vdev, done);
 	}
 
 	*done = (a0 == 0);
@@ -691,13 +691,12 @@ int vnic_dev_set_ig_vlan_rewrite_mode(struct vnic_dev *vdev,
 {
 	u64 a0 = ig_vlan_rewrite_mode, a1 = 0;
 	int wait = 1000;
-	int err;
 
-	err = vnic_dev_cmd(vdev, CMD_IG_VLAN_REWRITE_MODE, &a0, &a1, wait);
-	if (err == ERR_ECMDUNKNOWN)
+	if (vnic_dev_capable(vdev, CMD_IG_VLAN_REWRITE_MODE))
+		return vnic_dev_cmd(vdev, CMD_IG_VLAN_REWRITE_MODE,
+				&a0, &a1, wait);
+	else
 		return 0;
-
-	return err;
 }
 
 static int vnic_dev_notify_setcmd(struct vnic_dev *vdev,
@@ -835,7 +834,10 @@ int vnic_dev_intr_coal_timer_info(struct vnic_dev *vdev)
 
 	memset(vdev->args, 0, sizeof(vdev->args));
 
+	if (vnic_dev_capable(vdev, CMD_INTR_COAL_CONVERT))
 		err = _vnic_dev_cmd(vdev, CMD_INTR_COAL_CONVERT, wait);
+	else
+		err = ERR_ECMDUNKNOWN;
 
 	/* Use defaults when firmware doesn't support the devcmd at all or
 	 * supports it for only specific hardware
@@ -848,9 +850,11 @@ int vnic_dev_intr_coal_timer_info(struct vnic_dev *vdev)
 		return 0;
 	}
 
+	if (!err) {
 		vdev->intr_coal_timer_info.mul = (u32) vdev->args[0];
 		vdev->intr_coal_timer_info.div = (u32) vdev->args[1];
 		vdev->intr_coal_timer_info.max_usec = (u32) vdev->args[2];
+	}
 
 	return err;
 }