Skip to content

L
linux
Commit f970bec3 authored by Ioana Ciornei's avatar Ioana Ciornei Committed by Greg Kroah-Hartman
Browse files
Options

staging: fsl-dpaa2/eth: document nested structs as per kernel-doc 

Document nested structs per kernel-doc requirements by moving
all comments before the actual struct.
Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5b91b73b
Show whitespace changes
Inline Side-by-side
Showing with 99 additions and 100 deletions
drivers/staging/fsl-dpaa2/ethernet/dpkg.h
View file @ f970bec3
......@@ -93,31 +93,18 @@ struct dpkg_mask {
* DPKG_EXTRACT_FROM_DATA: selects 'from_data';
* DPKG_EXTRACT_FROM_PARSE: selects 'from_parse'
* @extract: Selects extraction method
* @num_of_byte_masks: Defines the number of valid entries in the array below;
* This is also the number of bytes to be used as masks
* @masks: Masks parameters
*/
struct dpkg_extract {
enum dpkg_extract_type type;
/**
* union extract - Selects extraction method
* @from_hdr - Used when 'type = DPKG_EXTRACT_FROM_HDR'
* @from_data - Used when 'type = DPKG_EXTRACT_FROM_DATA'
* @from_parse - Used when 'type = DPKG_EXTRACT_FROM_PARSE'
*/
union {
/**
* struct from_hdr - Used when 'type = DPKG_EXTRACT_FROM_HDR'
* @prot: Any of the supported headers
* @type: Defines the type of header extraction:
* @extract.from_hdr: Used when 'type = DPKG_EXTRACT_FROM_HDR'
* @extract.from_data: Used when 'type = DPKG_EXTRACT_FROM_DATA'
* @extract.from_parse: Used when 'type = DPKG_EXTRACT_FROM_PARSE'
* @extract.from_hdr.prot: Any of the supported headers
* @extract.from_hdr.type: Defines the type of header extraction:
* DPKG_FROM_HDR: use size & offset below;
* DPKG_FROM_FIELD: use field, size and offset below;
* DPKG_FULL_FIELD: use field below
* @field: One of the supported fields (NH_FLD_)
*
* @size: Size in bytes
* @offset: Byte offset
* @hdr_index: Clear for cases not listed below;
* @extract.from_hdr.field: One of the supported fields (NH_FLD_)
* @extract.from_hdr.size: Size in bytes
* @extract.from_hdr.offset: Byte offset
* @extract.from_hdr.hdr_index: Clear for cases not listed below;
* Used for protocols that may have more than a single
* header, 0 indicates an outer header;
* Supported protocols (possible values):
......@@ -126,8 +113,17 @@ struct dpkg_extract {
* NET_PROT_IP(0, HDR_INDEX_LAST);
* NET_PROT_IPv4(0, HDR_INDEX_LAST);
* NET_PROT_IPv6(0, HDR_INDEX_LAST);
* @extract.from_data.size: Size in bytes
* @extract.from_data.offset: Byte offset
* @extract.from_parse.size: Size in bytes
* @extract.from_parse.offset: Byte offset
* @num_of_byte_masks: Defines the number of valid entries in the array below;
* This is also the number of bytes to be used as masks
* @masks: Masks parameters
*/
struct dpkg_extract {
enum dpkg_extract_type type;
union {
struct {
enum net_prot prot;
enum dpkg_extract_from_hdr_type type;
......@@ -136,22 +132,10 @@ struct dpkg_extract {
u8 offset;
u8 hdr_index;
} from_hdr;
/**
* struct from_data - Used when 'type = DPKG_EXTRACT_FROM_DATA'
* @size: Size in bytes
* @offset: Byte offset
*/
struct {
u8 size;
u8 offset;
} from_data;
/**
* struct from_parse - Used when
* 'type = DPKG_EXTRACT_FROM_PARSE'
* @size: Size in bytes
* @offset: Byte offset
*/
struct {
u8 size;
u8 offset;
......
drivers/staging/fsl-dpaa2/ethernet/dpni.h
View file @ f970bec3
......@@ -117,15 +117,12 @@ int dpni_close(struct fsl_mc_io *mc_io,
* @num_dpbp: Number of DPBPs
* @pools: Array of buffer pools parameters; The number of valid entries
* must match 'num_dpbp' value
* @pools.dpbp_id: DPBP object ID
* @pools.buffer_size: Buffer size
* @pools.backup_pool: Backup pool
*/
struct dpni_pools_cfg {
u8 num_dpbp;
/**
* struct pools - Buffer pools parameters
* @dpbp_id: DPBP object ID
* @buffer_size: Buffer size
* @backup_pool: Backup pool
*/
struct {
int dpbp_id;
u16 buffer_size;
......@@ -424,16 +421,32 @@ int dpni_get_tx_data_offset(struct fsl_mc_io *mc_io,
#define DPNI_STATISTICS_CNT 7
union dpni_statistics {
/**
* struct page_0 - Page_0 statistics structure
* @ingress_all_frames: Ingress frame count
* @ingress_all_bytes: Ingress byte count
* @ingress_multicast_frames: Ingress multicast frame count
* @ingress_multicast_bytes: Ingress multicast byte count
* @ingress_broadcast_frames: Ingress broadcast frame count
* @ingress_broadcast_bytes: Ingress broadcast byte count
/**
* union dpni_statistics - Union describing the DPNI statistics
* @page_0: Page_0 statistics structure
* @page_0.ingress_all_frames: Ingress frame count
* @page_0.ingress_all_bytes: Ingress byte count
* @page_0.ingress_multicast_frames: Ingress multicast frame count
* @page_0.ingress_multicast_bytes: Ingress multicast byte count
* @page_0.ingress_broadcast_frames: Ingress broadcast frame count
* @page_0.ingress_broadcast_bytes: Ingress broadcast byte count
* @page_1: Page_1 statistics structure
* @page_1.egress_all_frames: Egress frame count
* @page_1.egress_all_bytes: Egress byte count
* @page_1.egress_multicast_frames: Egress multicast frame count
* @page_1.egress_multicast_bytes: Egress multicast byte count
* @page_1.egress_broadcast_frames: Egress broadcast frame count
* @page_1.egress_broadcast_bytes: Egress broadcast byte count
* @page_2: Page_2 statistics structure
* @page_2.ingress_filtered_frames: Ingress filtered frame count
* @page_2.ingress_discarded_frames: Ingress discarded frame count
* @page_2.ingress_nobuffer_discards: Ingress discarded frame count due to
* lack of buffers
* @page_2.egress_discarded_frames: Egress discarded frame count
* @page_2.egress_confirmed_frames: Egress confirmed frame count
* @raw: raw statistics structure, used to index counters
*/
union dpni_statistics {
struct {
u64 ingress_all_frames;
u64 ingress_all_bytes;
......@@ -442,15 +455,6 @@ union dpni_statistics {
u64 ingress_broadcast_frames;
u64 ingress_broadcast_bytes;
} page_0;
/**
* struct page_1 - Page_1 statistics structure
* @egress_all_frames: Egress frame count
* @egress_all_bytes: Egress byte count
* @egress_multicast_frames: Egress multicast frame count
* @egress_multicast_bytes: Egress multicast byte count
* @egress_broadcast_frames: Egress broadcast frame count
* @egress_broadcast_bytes: Egress broadcast byte count
*/
struct {
u64 egress_all_frames;
u64 egress_all_bytes;
......@@ -459,15 +463,6 @@ union dpni_statistics {
u64 egress_broadcast_frames;
u64 egress_broadcast_bytes;
} page_1;
/**
* struct page_2 - Page_2 statistics structure
* @ingress_filtered_frames: Ingress filtered frame count
* @ingress_discarded_frames: Ingress discarded frame count
* @ingress_nobuffer_discards: Ingress discarded frame count
* due to lack of buffers
* @egress_discarded_frames: Egress discarded frame count
* @egress_confirmed_frames: Egress confirmed frame count
*/
struct {
u64 ingress_filtered_frames;
u64 ingress_discarded_frames;
......@@ -475,9 +470,6 @@ union dpni_statistics {
u64 egress_discarded_frames;
u64 egress_confirmed_frames;
} page_2;
/**
* struct raw - raw statistics structure
*/
struct {
u64 counter[DPNI_STATISTICS_CNT];
} raw;
......@@ -685,29 +677,52 @@ enum dpni_dest {
/**
* struct dpni_queue - Queue structure
* @user_context: User data, presented to the user along with any frames from
* this queue. Not relevant for Tx queues.
*/
struct dpni_queue {
/**
* struct destination - Destination structure
* @id: ID of the destination, only relevant if DEST_TYPE is > 0.
* Identifies either a DPIO or a DPCON object. Not relevant for
* Tx queues.
* @type: May be one of the following:
* 0 - No destination, queue can be manually queried, but will not
* push traffic or notifications to a DPIO;
* 1 - The destination is a DPIO. When traffic becomes available in
* the queue a FQDAN (FQ data available notification) will be
* @destination - Destination structure
* @destination.id: ID of the destination, only relevant if DEST_TYPE is > 0.
* Identifies either a DPIO or a DPCON object.
* Not relevant for Tx queues.
* @destination.type: May be one of the following:
* 0 - No destination, queue can be manually
* queried, but will not push traffic or
* notifications to a DPIO;
* 1 - The destination is a DPIO. When traffic
* becomes available in the queue a FQDAN
* (FQ data available notification) will be
* generated to selected DPIO;
* 2 - The destination is a DPCON. The queue is associated with a
* DPCON object for the purpose of scheduling between multiple
* queues. The DPCON may be independently configured to
* generate notifications. Not relevant for Tx queues.
* @hold_active: Hold active, maintains a queue scheduled for longer
* 2 - The destination is a DPCON. The queue is
* associated with a DPCON object for the
* purpose of scheduling between multiple
* queues. The DPCON may be independently
* configured to generate notifications.
* Not relevant for Tx queues.
* @destination.hold_active: Hold active, maintains a queue scheduled for longer
* in a DPIO during dequeue to reduce spread of traffic.
* Only relevant if queues are not affined to a single DPIO.
* Only relevant if queues are
* not affined to a single DPIO.
* @user_context: User data, presented to the user along with any frames
* from this queue. Not relevant for Tx queues.
* @flc: FD FLow Context structure
* @flc.value: Default FLC value for traffic dequeued from
* this queue. Please check description of FD
* structure for more information.
* Note that FLC values set using dpni_add_fs_entry,
* if any, take precedence over values per queue.
* @flc.stash_control: Boolean, indicates whether the 6 lowest
* - significant bits are used for stash control.
* significant bits are used for stash control. If set, the 6
* least significant bits in value are interpreted as follows:
* - bits 0-1: indicates the number of 64 byte units of context
* that are stashed. FLC value is interpreted as a memory address
* in this case, excluding the 6 LS bits.
* - bits 2-3: indicates the number of 64 byte units of frame
* annotation to be stashed. Annotation is placed at FD[ADDR].
* - bits 4-5: indicates the number of 64 byte units of frame
* data to be stashed. Frame data is placed at FD[ADDR] +
* FD[OFFSET].
* For more details check the Frame Descriptor section in the
* hardware documentation.
*/
struct dpni_queue {
struct {
u16 id;
enum dpni_dest type;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7