usb: xhci: handle both SSIC ports in PME stuck quirk

Commit abce329c ("xhci: Workaround to get D3 working in Intel xHCI")
adds a workaround for a limitation of PME storm caused by SSIC port in
some Intel SoCs. This commit only handled one SSIC port, while there
are actually two SSIC ports in the chips. This patch handles both SSIC
ports. Without this fix, users still see PME storm.

Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/xhci-pci.c

@@ -28,7 +28,9 @@
 #include "xhci.h"
 #include "xhci-trace.h"
 
-#define PORT2_SSIC_CONFIG_REG2	0x883c
+#define SSIC_PORT_NUM		2
+#define SSIC_PORT_CFG2		0x880c
+#define SSIC_PORT_CFG2_OFFSET	0x30
 #define PROG_DONE		(1 << 30)
 #define SSIC_PORT_UNUSED	(1 << 31)
 
@@ -321,13 +323,20 @@ static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 	u32 val;
 	void __iomem *reg;
+	int i;
 
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
 
-		reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
+		for (i = 0; i < SSIC_PORT_NUM; i++) {
+			reg = (void __iomem *) xhci->cap_regs +
+					SSIC_PORT_CFG2 +
+					i * SSIC_PORT_CFG2_OFFSET;
 
-		/* Notify SSIC that SSIC profile programming is not done */
+			/*
+			 * Notify SSIC that SSIC profile programming
+			 * is not done.
+			 */
 			val = readl(reg) & ~PROG_DONE;
 			writel(val, reg);
 
@@ -344,6 +353,7 @@ static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
 			writel(val, reg);
 			readl(reg);
 		}
+	}
 
 	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
 	val = readl(reg);