drivers/rtc/rtc-max8925.c: fix alarm->enabled mistake in...

drivers/rtc/rtc-max8925.c: fix alarm->enabled mistake in max8925_rtc_read_alarm/max8925_rtc_set_alarm

max8925_rtc_read_alarm() should set alrm->enabled based on both
ALARM_IRQ_MASK and ALARM_CTRL setting.  max8925_rtc_set_alarm() should
enable/disable alarm according to ALARM_CTRL reg setting.
Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-max8925.c

@@ -193,10 +193,17 @@ static int max8925_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	ret = max8925_reg_read(info->rtc, MAX8925_RTC_IRQ_MASK);
 	if (ret < 0)
 		goto out;
-	if ((ret & ALARM0_IRQ) == 0)
-		alrm->enabled = 1;
-	else
+	if (ret & ALARM0_IRQ) {
+		alrm->enabled = 0;
+	} else {
+		ret = max8925_reg_read(info->rtc, MAX8925_ALARM0_CNTL);
+		if (ret < 0)
+			goto out;
+		if (!ret)
 			alrm->enabled = 0;
+		else
+			alrm->enabled = 1;
+	}
 	ret = max8925_reg_read(info->rtc, MAX8925_RTC_STATUS);
 	if (ret < 0)
 		goto out;
@@ -221,8 +228,11 @@ static int max8925_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	ret = max8925_bulk_write(info->rtc, MAX8925_ALARM0_SEC, TIME_NUM, buf);
 	if (ret < 0)
 		goto out;
+	if (alrm->enabled)
 		/* only enable alarm on year/month/day/hour/min/sec */
 		ret = max8925_reg_write(info->rtc, MAX8925_ALARM0_CNTL, 0x77);
+	else
+		ret = max8925_reg_write(info->rtc, MAX8925_ALARM0_CNTL, 0x0);
 	if (ret < 0)
 		goto out;
 out: