Merge tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
 "New hw support:
   - Rcar usb2 support for RZ/G3S SoC
   - Nuvoton MA35 SoC USB 2.0 PHY driver

  Removed:
   - obsolete qcom,usb-8x16-phy bindings

  Updates:
   - 4 lane PCIe support for Qualcomm X1E80100
   - Constify structure in subsystem update
   - Subsystem simplification with scoped for each OF child loop update
   - Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy
     bindings"

* tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits)
  phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC
  dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings
  phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
  phy: ti: j721e-wiz: Simplify with scoped for each OF child loop
  phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code
  phy: ti: gmii-sel: Simplify with dev_err_probe()
  phy: ti: am654-serdes: Use scoped device node handling to simplify error paths
  phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop
  phy: mediatek: xsphy: Simplify with scoped for each OF child loop
  phy: mediatek: tphy: Simplify with scoped for each OF child loop
  phy: hisilicon: usb2: Simplify with scoped for each OF child loop
  phy: cadence: sierra: Simplify with scoped for each OF child loop
  phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop
  phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop
  phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY
  dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings
  phy: qcom: qmp-pcie: Configure all tables on port B PHY
  phy: airoha: adjust initialization delay in airoha_pcie_phy_init()
  dt-bindings: phy: socionext,uniphier: add top-level constraints
  phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100
  ...

Documentation/devicetree/bindings/phy/hisilicon,hi3798cv200-combphy.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,hi3798cv200-combphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon STB PCIE/SATA/USB3 PHY
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+properties:
+  compatible:
+    const: hisilicon,hi3798cv200-combphy
+
+  reg:
+    maxItems: 1
+
+  '#phy-cells':
+    description: The cell contains the PHY mode
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  hisilicon,fixed-mode:
+    description: If the phy device doesn't support mode select but a fixed mode
+      setting, the property should be present to specify the particular mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 4]  # SATA, PCIE, USB3
+
+  hisilicon,mode-select-bits:
+    description: If the phy device support mode select, this property should be
+      present to specify the register bits in peripheral controller.
+    items:
+      - description: register_offset
+      - description: bit shift
+      - description: bit mask
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+  - clocks
+  - resets
+
+oneOf:
+  - required: ['hisilicon,fixed-mode']
+  - required: ['hisilicon,mode-select-bits']
+
+additionalProperties: false
+
+...

Documentation/devicetree/bindings/phy/nuvoton,ma35d1-usb2-phy.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nuvoton,ma35d1-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 USB2 phy
+
+maintainers:
+  - Hui-Ping Chen <hpchen0nvt@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,ma35d1-usb2-phy
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  nuvoton,sys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to syscon for checking the PHY clock status.
+
+required:
+  - compatible
+  - "#phy-cells"
+  - clocks
+  - nuvoton,sys
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+
+    usb_phy: usb-phy {
+        compatible = "nuvoton,ma35d1-usb2-phy";
+        clocks = <&clk USBD_GATE>;
+        nuvoton,sys = <&sys>;
+        #phy-cells = <0>;
+    };

Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt

-HiSilicon STB PCIE/SATA/USB3 PHY
-
-Required properties:
-- compatible: Should be "hisilicon,hi3798cv200-combphy"
-- reg: Should be the address space for COMBPHY configuration and state
-  registers in peripheral controller, e.g. PERI_COMBPHY0_CFG and
-  PERI_COMBPHY0_STATE for COMBPHY0 Hi3798CV200 SoC.
-- #phy-cells: Should be 1.  The cell number is used to select the phy mode
-  as defined in <dt-bindings/phy/phy.h>.
-- clocks: The phandle to clock provider and clock specifier pair.
-- resets: The phandle to reset controller and reset specifier pair.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Optional properties:
-- hisilicon,fixed-mode: If the phy device doesn't support mode select
-  but a fixed mode setting, the property should be present to specify
-  the particular mode.
-- hisilicon,mode-select-bits: If the phy device support mode select,
-  this property should be present to specify the register bits in
-  peripheral controller, as a 3 integers tuple:
-  <register_offset bit_shift bit_mask>.
-
-Notes:
-- Between hisilicon,fixed-mode and hisilicon,mode-select-bits, one and only
-  one of them should be present.
-- The device node should be a child of peripheral controller that contains
-  COMBPHY configuration/state and PERI_CTRL register used to select PHY mode.
-  Refer to arm/hisilicon/hisilicon.txt for the parent peripheral controller
-  bindings.
-
-Examples:
-
-perictrl: peripheral-controller@8a20000 {
-	compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
-		     "simple-mfd";
-	reg = <0x8a20000 0x1000>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x0 0x8a20000 0x1000>;
-
-	combphy0: phy@850 {
-		compatible = "hisilicon,hi3798cv200-combphy";
-		reg = <0x850 0x8>;
-		#phy-cells = <1>;
-		clocks = <&crg HISTB_COMBPHY0_CLK>;
-		resets = <&crg 0x188 4>;
-		hisilicon,fixed-mode = <PHY_TYPE_USB3>;
-	};
-
-	combphy1: phy@858 {
-		compatible = "hisilicon,hi3798cv200-combphy";
-		reg = <0x858 0x8>;
-		#phy-cells = <1>;
-		clocks = <&crg HISTB_COMBPHY1_CLK>;
-		resets = <&crg 0x188 12>;
-		hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
-	};
-};

Documentation/devicetree/bindings/phy/qcom,sata-phy.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sata-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SATA PHY Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description:
+  The Qualcomm SATA PHY describes on-chip SATA Physical layer controllers.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq806x-sata-phy
+      - qcom,apq8064-sata-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: cfg
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    sata_phy: sata-phy@1b400000 {
+        compatible = "qcom,ipq806x-sata-phy";
+        reg = <0x1b400000 0x200>;
+
+        clocks = <&gcc SATA_PHY_CFG_CLK>;
+        clock-names = "cfg";
+
+        #phy-cells = <0>;
+    };
+

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml

@@ -40,6 +40,7 @@ properties:
       - qcom,sm8650-qmp-gen4x2-pcie-phy
       - qcom,x1e80100-qmp-gen3x2-pcie-phy
       - qcom,x1e80100-qmp-gen4x2-pcie-phy
+      - qcom,x1e80100-qmp-gen4x4-pcie-phy
 
   reg:
     minItems: 1
@@ -118,6 +119,7 @@ allOf:
           contains:
             enum:
               - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+              - qcom,x1e80100-qmp-gen4x4-pcie-phy
     then:
       properties:
         reg:
@@ -169,6 +171,7 @@ allOf:
               - qcom,sc8280xp-qmp-gen3x1-pcie-phy
               - qcom,sc8280xp-qmp-gen3x2-pcie-phy
               - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+              - qcom,x1e80100-qmp-gen4x4-pcie-phy
     then:
       properties:
         clocks:

Documentation/devicetree/bindings/phy/qcom,usb-8x16-phy.txt

-Qualcomm's APQ8016/MSM8916 USB transceiver controller
-
-- compatible:
-    Usage: required
-    Value type: <string>
-    Definition: Should contain "qcom,usb-8x16-phy".
-
-- reg:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: USB PHY base address and length of the register map
-
-- clocks:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: See clock-bindings.txt section "consumers". List of
-                two clock specifiers for interface and core controller
-                clocks.
-
-- clock-names:
-    Usage: required
-    Value type: <string>
-    Definition: Must contain "iface" and "core" strings.
-
-- vddcx-supply:
-    Usage: required
-    Value type: <phandle>
-    Definition: phandle to the regulator VDCCX supply node.
-
-- v1p8-supply:
-    Usage: required
-    Value type: <phandle>
-    Definition: phandle to the regulator 1.8V supply node.
-
-- v3p3-supply:
-    Usage: required
-    Value type: <phandle>
-    Definition: phandle to the regulator 3.3V supply node.
-
-- resets:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: See reset.txt section "consumers". PHY reset specifier.
-
-- reset-names:
-    Usage: required
-    Value type: <string>
-    Definition: Must contain "phy" string.
-
-- switch-gpio:
-    Usage: optional
-    Value type: <prop-encoded-array>
-    Definition: Some boards are using Dual SPDT USB Switch, witch is
-                controlled by GPIO to de/multiplex D+/D- USB lines
-                between connectors.
-
-Example:
-	usb_phy: phy@78d9000 {
-		compatible = "qcom,usb-8x16-phy";
-		reg = <0x78d9000 0x400>;
-
-		vddcx-supply = <&pm8916_s1_corner>;
-		v1p8-supply = <&pm8916_l7>;
-		v3p3-supply = <&pm8916_l13>;
-
-		clocks = <&gcc GCC_USB_HS_AHB_CLK>,
-			     <&gcc GCC_USB_HS_SYSTEM_CLK>;
-		clock-names = "iface", "core";
-
-		resets = <&gcc GCC_USB2A_PHY_BCR>;
-		reset-names = "phy";
-
-		// D+/D- lines: 1 - Routed to HUB, 0 - Device connector
-		switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
-	};
-

Documentation/devicetree/bindings/phy/qcom-apq8064-sata-phy.txt

-Qualcomm APQ8064 SATA PHY Controller
-------------------------------------
-
-SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
-Each SATA PHY controller should have its own node.
-
-Required properties:
-- compatible: compatible list, contains "qcom,apq8064-sata-phy".
-- reg: offset and length of the SATA PHY register set;
-- #phy-cells: must be zero
-- clocks: a list of phandles and clock-specifier pairs, one for each entry in
-  clock-names.
-- clock-names: must be "cfg" for phy config clock.
-
-Example:
-	sata_phy: sata-phy@1b400000 {
-		compatible = "qcom,apq8064-sata-phy";
-		reg = <0x1b400000 0x200>;
-
-		clocks = <&gcc SATA_PHY_CFG_CLK>;
-		clock-names = "cfg";
-
-		#phy-cells = <0>;
-	};

Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt

-Qualcomm IPQ806x SATA PHY Controller
-------------------------------------
-
-SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
-Each SATA PHY controller should have its own node.
-
-Required properties:
-- compatible: compatible list, contains "qcom,ipq806x-sata-phy"
-- reg: offset and length of the SATA PHY register set;
-- #phy-cells: must be zero
-- clocks: must be exactly one entry
-- clock-names: must be "cfg"
-
-Example:
-	sata_phy: sata-phy@1b400000 {
-		compatible = "qcom,ipq806x-sata-phy";
-		reg = <0x1b400000 0x200>;
-
-		clocks = <&gcc SATA_PHY_CFG_CLK>;
-		clock-names = "cfg";
-
-		#phy-cells = <0>;
-	};

Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml

@@ -13,7 +13,9 @@ properties:
   compatible:
     oneOf:
       - items:
-          - const: renesas,usb2-phy-r8a77470 # RZ/G1C
+          - enum:
+              - renesas,usb2-phy-r8a77470  # RZ/G1C
+              - renesas,usb2-phy-r9a08g045 # RZ/G3S
 
       - items:
           - enum:

Documentation/devicetree/bindings/phy/rockchip,rk3588-hdptx-phy.yaml

@@ -27,6 +27,9 @@ properties:
       - const: ref
       - const: apb
 
+  "#clock-cells":
+    const: 0
+
   "#phy-cells":
     const: 0
 

Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml

@@ -30,13 +30,17 @@ properties:
     minItems: 1
     maxItems: 2
 
-  clock-names: true
+  clock-names:
+    minItems: 1
+    maxItems: 6
 
   resets:
     minItems: 2
     maxItems: 6
 
-  reset-names: true
+  reset-names:
+    minItems: 2
+    maxItems: 6
 
 allOf:
   - if:

Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml

@@ -31,13 +31,17 @@ properties:
     minItems: 1
     maxItems: 2
 
-  clock-names: true
+  clock-names:
+    minItems: 1
+    maxItems: 2
 
   resets:
     minItems: 1
     maxItems: 2
 
-  reset-names: true
+  reset-names:
+    minItems: 1
+    maxItems: 2
 
   socionext,syscon:
     $ref: /schemas/types.yaml#/definitions/phandle

Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml

@@ -34,12 +34,15 @@ properties:
     minItems: 2
     maxItems: 3
 
-  clock-names: true
+  clock-names:
+    minItems: 2
+    maxItems: 3
 
   resets:
     maxItems: 2
 
-  reset-names: true
+  reset-names:
+    maxItems: 2
 
   vbus-supply:
     description: A phandle to the regulator for USB VBUS

Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml

@@ -35,12 +35,15 @@ properties:
     minItems: 2
     maxItems: 3
 
-  clock-names: true
+  clock-names:
+    minItems: 2
+    maxItems: 3
 
   resets:
     maxItems: 2
 
-  reset-names: true
+  reset-names:
+    maxItems: 2
 
   vbus-supply:
     description: A phandle to the regulator for USB VBUS, only for USB host

drivers/phy/Kconfig

@@ -95,6 +95,7 @@ source "drivers/phy/mediatek/Kconfig"
 source "drivers/phy/microchip/Kconfig"
 source "drivers/phy/motorola/Kconfig"
 source "drivers/phy/mscc/Kconfig"
+source "drivers/phy/nuvoton/Kconfig"
 source "drivers/phy/qualcomm/Kconfig"
 source "drivers/phy/ralink/Kconfig"
 source "drivers/phy/realtek/Kconfig"

drivers/phy/Makefile

@@ -25,6 +25,7 @@ obj-y					+= allwinner/	\
 					   microchip/	\
 					   motorola/	\
 					   mscc/	\
+					   nuvoton/	\
 					   qualcomm/	\
 					   ralink/	\
 					   realtek/	\

drivers/phy/broadcom/phy-bcm-cygnus-pcie.c

@@ -113,11 +113,10 @@ static const struct phy_ops cygnus_pcie_phy_ops = {
 static int cygnus_pcie_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *node = dev->of_node, *child;
+	struct device_node *node = dev->of_node;
 	struct cygnus_pcie_phy_core *core;
 	struct phy_provider *provider;
 	unsigned cnt = 0;
-	int ret;
 
 	if (of_get_child_count(node) == 0) {
 		dev_err(dev, "PHY no child node\n");
@@ -136,35 +135,31 @@ static int cygnus_pcie_phy_probe(struct platform_device *pdev)
 
 	mutex_init(&core->lock);
 
-	for_each_available_child_of_node(node, child) {
+	for_each_available_child_of_node_scoped(node, child) {
 		unsigned int id;
 		struct cygnus_pcie_phy *p;
 
 		if (of_property_read_u32(child, "reg", &id)) {
 			dev_err(dev, "missing reg property for %pOFn\n",
 				child);
-			ret = -EINVAL;
-			goto put_child;
+			return -EINVAL;
 		}
 
 		if (id >= MAX_NUM_PHYS) {
 			dev_err(dev, "invalid PHY id: %u\n", id);
-			ret = -EINVAL;
-			goto put_child;
+			return -EINVAL;
 		}
 
 		if (core->phys[id].phy) {
 			dev_err(dev, "duplicated PHY id: %u\n", id);
-			ret = -EINVAL;
-			goto put_child;
+			return -EINVAL;
 		}
 
 		p = &core->phys[id];
 		p->phy = devm_phy_create(dev, child, &cygnus_pcie_phy_ops);
 		if (IS_ERR(p->phy)) {
 			dev_err(dev, "failed to create PHY\n");
-			ret = PTR_ERR(p->phy);
-			goto put_child;
+			return PTR_ERR(p->phy);
 		}
 
 		p->core = core;
@@ -184,9 +179,6 @@ static int cygnus_pcie_phy_probe(struct platform_device *pdev)
 	dev_dbg(dev, "registered %u PCIe PHY(s)\n", cnt);
 
 	return 0;
-put_child:
-	of_node_put(child);
-	return ret;
 }
 
 static const struct of_device_id cygnus_pcie_phy_match_table[] = {

drivers/phy/broadcom/phy-brcm-sata.c

@@ -751,11 +751,11 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 {
 	const char *rxaeq_mode;
 	struct device *dev = &pdev->dev;
-	struct device_node *dn = dev->of_node, *child;
+	struct device_node *dn = dev->of_node;
 	const struct of_device_id *of_id;
 	struct brcm_sata_phy *priv;
 	struct phy_provider *provider;
-	int ret, count = 0;
+	int count = 0;
 
 	if (of_get_child_count(dn) == 0)
 		return -ENODEV;
@@ -782,26 +782,23 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 			return PTR_ERR(priv->ctrl_base);
 	}
 
-	for_each_available_child_of_node(dn, child) {
+	for_each_available_child_of_node_scoped(dn, child) {
 		unsigned int id;
 		struct brcm_sata_port *port;
 
 		if (of_property_read_u32(child, "reg", &id)) {
 			dev_err(dev, "missing reg property in node %pOFn\n",
 					child);
-			ret = -EINVAL;
-			goto put_child;
+			return -EINVAL;
 		}
 
 		if (id >= MAX_PORTS) {
 			dev_err(dev, "invalid reg: %u\n", id);
-			ret = -EINVAL;
-			goto put_child;
+			return -EINVAL;
 		}
 		if (priv->phys[id].phy) {
 			dev_err(dev, "already registered port %u\n", id);
-			ret = -EINVAL;
-			goto put_child;
+			return -EINVAL;
 		}
 
 		port = &priv->phys[id];
@@ -822,8 +819,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 		port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
 		if (IS_ERR(port->phy)) {
 			dev_err(dev, "failed to create PHY\n");
-			ret = PTR_ERR(port->phy);
-			goto put_child;
+			return PTR_ERR(port->phy);
 		}
 
 		phy_set_drvdata(port->phy, port);
@@ -839,9 +835,6 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 	dev_info(dev, "registered %d port(s)\n", count);
 
 	return 0;
-put_child:
-	of_node_put(child);
-	return ret;
 }
 
 static struct platform_driver brcm_sata_phy_driver = {

drivers/phy/hisilicon/phy-hisi-inno-usb2.c

@@ -138,7 +138,6 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	struct hisi_inno_phy_priv *priv;
 	struct phy_provider *provider;
-	struct device_node *child;
 	int i = 0;
 	int ret;
 
@@ -162,24 +161,20 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
 
 	priv->type = (uintptr_t) of_device_get_match_data(dev);
 
-	for_each_child_of_node(np, child) {
+	for_each_child_of_node_scoped(np, child) {
 		struct reset_control *rst;
 		struct phy *phy;
 
 		rst = of_reset_control_get_exclusive(child, NULL);
-		if (IS_ERR(rst)) {
-			of_node_put(child);
+		if (IS_ERR(rst))
 			return PTR_ERR(rst);
-		}
 
 		priv->ports[i].utmi_rst = rst;
 		priv->ports[i].priv = priv;
 
 		phy = devm_phy_create(dev, child, &hisi_inno_phy_ops);
-		if (IS_ERR(phy)) {
-			of_node_put(child);
+		if (IS_ERR(phy))
 			return PTR_ERR(phy);
-		}
 
 		phy_set_bus_width(phy, 8);
 		phy_set_drvdata(phy, &priv->ports[i]);
@@ -187,7 +182,6 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
 
 		if (i >= INNO_PHY_PORT_NUM) {
 			dev_warn(dev, "Support %d ports in maximum\n", i);
-			of_node_put(child);
 			break;
 		}
 	}

drivers/phy/marvell/phy-mvebu-cp110-comphy.c

@@ -244,8 +244,8 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
 	GEN_CONF(4, 1, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
 	GEN_CONF(4, 1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
 	ETH_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
-	ETH_CONF(4, 1, PHY_INTERFACE_MODE_2500BASEX, -1, COMPHY_FW_MODE_2500BASEX),
-	ETH_CONF(4, 1, PHY_INTERFACE_MODE_5GBASER, -1, COMPHY_FW_MODE_XFI),
+	ETH_CONF(4, 1, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_2500BASEX),
+	ETH_CONF(4, 1, PHY_INTERFACE_MODE_5GBASER, 0x1, COMPHY_FW_MODE_XFI),
 	ETH_CONF(4, 1, PHY_INTERFACE_MODE_10GBASER, -1, COMPHY_FW_MODE_XFI),
 	/* lane 5 */
 	ETH_CONF(5, 1, PHY_INTERFACE_MODE_RXAUI, 0x2, COMPHY_FW_MODE_RXAUI),

drivers/phy/mediatek/phy-mtk-tphy.c

@@ -1577,12 +1577,11 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
-	struct device_node *child_np;
 	struct phy_provider *provider;
 	struct resource *sif_res;
 	struct mtk_tphy *tphy;
 	struct resource res;
-	int port, retval;
+	int port;
 
 	tphy = devm_kzalloc(dev, sizeof(*tphy), GFP_KERNEL);
 	if (!tphy)
@@ -1623,25 +1622,23 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 	}
 
 	port = 0;
-	for_each_child_of_node(np, child_np) {
+	for_each_child_of_node_scoped(np, child_np) {
 		struct mtk_phy_instance *instance;
 		struct clk_bulk_data *clks;
 		struct device *subdev;
 		struct phy *phy;
+		int retval;
 
 		instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
-		if (!instance) {
-			retval = -ENOMEM;
-			goto put_child;
-		}
+		if (!instance)
+			return -ENOMEM;
 
 		tphy->phys[port] = instance;
 
 		phy = devm_phy_create(dev, child_np, &mtk_tphy_ops);
 		if (IS_ERR(phy)) {
 			dev_err(dev, "failed to create phy\n");
-			retval = PTR_ERR(phy);
-			goto put_child;
+			return PTR_ERR(phy);
 		}
 
 		subdev = &phy->dev;
@@ -1649,14 +1646,12 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 		if (retval) {
 			dev_err(subdev, "failed to get address resource(id-%d)\n",
 				port);
-			goto put_child;
+			return retval;
 		}
 
 		instance->port_base = devm_ioremap_resource(subdev, &res);
-		if (IS_ERR(instance->port_base)) {
-			retval = PTR_ERR(instance->port_base);
-			goto put_child;
-		}
+		if (IS_ERR(instance->port_base))
+			return PTR_ERR(instance->port_base);
 
 		instance->phy = phy;
 		instance->index = port;
@@ -1668,19 +1663,16 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 		clks[1].id = "da_ref";  /* analog clock */
 		retval = devm_clk_bulk_get_optional(subdev, TPHY_CLKS_CNT, clks);
 		if (retval)
-			goto put_child;
+			return retval;
 
 		retval = phy_type_syscon_get(instance, child_np);
 		if (retval)
-			goto put_child;
+			return retval;
 	}
 
 	provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
 
 	return PTR_ERR_OR_ZERO(provider);
-put_child:
-	of_node_put(child_np);
-	return retval;
 }
 
 static struct platform_driver mtk_tphy_driver = {

drivers/phy/mediatek/phy-mtk-xsphy.c

@@ -432,12 +432,11 @@ static int mtk_xsphy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
-	struct device_node *child_np;
 	struct phy_provider *provider;
 	struct resource *glb_res;
 	struct mtk_xsphy *xsphy;
 	struct resource res;
-	int port, retval;
+	int port;
 
 	xsphy = devm_kzalloc(dev, sizeof(*xsphy), GFP_KERNEL);
 	if (!xsphy)
@@ -471,37 +470,34 @@ static int mtk_xsphy_probe(struct platform_device *pdev)
 	device_property_read_u32(dev, "mediatek,src-coef", &xsphy->src_coef);
 
 	port = 0;
-	for_each_child_of_node(np, child_np) {
+	for_each_child_of_node_scoped(np, child_np) {
 		struct xsphy_instance *inst;
 		struct phy *phy;
+		int retval;
 
 		inst = devm_kzalloc(dev, sizeof(*inst), GFP_KERNEL);
-		if (!inst) {
-			retval = -ENOMEM;
-			goto put_child;
-		}
+		if (!inst)
+			return -ENOMEM;
 
 		xsphy->phys[port] = inst;
 
 		phy = devm_phy_create(dev, child_np, &mtk_xsphy_ops);
 		if (IS_ERR(phy)) {
 			dev_err(dev, "failed to create phy\n");
-			retval = PTR_ERR(phy);
-			goto put_child;
+			return PTR_ERR(phy);
 		}
 
 		retval = of_address_to_resource(child_np, 0, &res);
 		if (retval) {
 			dev_err(dev, "failed to get address resource(id-%d)\n",
 				port);
-			goto put_child;
+			return retval;
 		}
 
 		inst->port_base = devm_ioremap_resource(&phy->dev, &res);
 		if (IS_ERR(inst->port_base)) {
 			dev_err(dev, "failed to remap phy regs\n");
-			retval = PTR_ERR(inst->port_base);
-			goto put_child;
+			return PTR_ERR(inst->port_base);
 		}
 
 		inst->phy = phy;
@@ -512,17 +508,12 @@ static int mtk_xsphy_probe(struct platform_device *pdev)
 		inst->ref_clk = devm_clk_get(&phy->dev, "ref");
 		if (IS_ERR(inst->ref_clk)) {
 			dev_err(dev, "failed to get ref_clk(id-%d)\n", port);
-			retval = PTR_ERR(inst->ref_clk);
-			goto put_child;
+			return PTR_ERR(inst->ref_clk);
 		}
 	}
 
 	provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
 	return PTR_ERR_OR_ZERO(provider);
-
-put_child:
-	of_node_put(child_np);
-	return retval;
 }
 
 static struct platform_driver mtk_xsphy_driver = {

drivers/phy/nuvoton/Kconfig

+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PHY drivers for Nuvoton MA35 platforms
+#
+config PHY_MA35_USB
+	tristate "Nuvoton MA35 USB2.0 PHY driver"
+	depends on ARCH_MA35 || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the USB2.0 PHY on the Nuvoton MA35
+	  series SoCs.

drivers/phy/nuvoton/Makefile

+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_PHY_MA35_USB)		+= phy-ma35d1-usb2.o

drivers/phy/nuvoton/phy-ma35d1-usb2.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 Nuvoton Technology Corp.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* USB PHY Miscellaneous Control Register */
+#define MA35_SYS_REG_USBPMISCR	0x60
+#define PHY0POR			BIT(0)  /* PHY Power-On Reset Control Bit */
+#define PHY0SUSPEND			BIT(1)  /* PHY Suspend; 0: suspend, 1: operaion */
+#define PHY0COMN			BIT(2)  /* PHY Common Block Power-Down Control */
+#define PHY0DEVCKSTB			BIT(10) /* PHY 60 MHz UTMI clock stable bit */
+
+struct ma35_usb_phy {
+	struct clk *clk;
+	struct device *dev;
+	struct regmap *sysreg;
+};
+
+static int ma35_usb_phy_power_on(struct phy *phy)
+{
+	struct ma35_usb_phy *p_phy = phy_get_drvdata(phy);
+	unsigned int val;
+	int ret;
+
+	ret = clk_prepare_enable(p_phy->clk);
+	if (ret < 0) {
+		dev_err(p_phy->dev, "Failed to enable PHY clock: %d\n", ret);
+		return ret;
+	}
+
+	regmap_read(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, &val);
+	if (val & PHY0SUSPEND) {
+		/*
+		 * USB PHY0 is in operation mode already
+		 * make sure USB PHY 60 MHz UTMI Interface Clock ready
+		 */
+		ret = regmap_read_poll_timeout(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, val,
+						val & PHY0DEVCKSTB, 10, 1000);
+		if (ret == 0)
+			return 0;
+	}
+
+	/*
+	 * reset USB PHY0.
+	 * wait until USB PHY0 60 MHz UTMI Interface Clock ready
+	 */
+	regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, (PHY0POR | PHY0SUSPEND));
+	udelay(20);
+
+	/* make USB PHY0 enter operation mode */
+	regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, PHY0SUSPEND);
+
+	/* make sure USB PHY 60 MHz UTMI Interface Clock ready */
+	ret = regmap_read_poll_timeout(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, val,
+					val & PHY0DEVCKSTB, 10, 1000);
+	if (ret == -ETIMEDOUT) {
+		dev_err(p_phy->dev, "Check PHY clock, Timeout: %d\n", ret);
+		clk_disable_unprepare(p_phy->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ma35_usb_phy_power_off(struct phy *phy)
+{
+	struct ma35_usb_phy *p_phy = phy_get_drvdata(phy);
+
+	clk_disable_unprepare(p_phy->clk);
+	return 0;
+}
+
+static const struct phy_ops ma35_usb_phy_ops = {
+	.power_on = ma35_usb_phy_power_on,
+	.power_off = ma35_usb_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+static int ma35_usb_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *provider;
+	struct ma35_usb_phy *p_phy;
+	struct phy *phy;
+
+	p_phy = devm_kzalloc(&pdev->dev, sizeof(*p_phy), GFP_KERNEL);
+	if (!p_phy)
+		return -ENOMEM;
+
+	p_phy->dev = &pdev->dev;
+	platform_set_drvdata(pdev, p_phy);
+
+	p_phy->sysreg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "nuvoton,sys");
+	if (IS_ERR(p_phy->sysreg))
+		return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->sysreg),
+				     "Failed to get SYS registers\n");
+
+	p_phy->clk = of_clk_get(pdev->dev.of_node, 0);
+	if (IS_ERR(p_phy->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->clk),
+				     "failed to find usb_phy clock\n");
+
+	phy = devm_phy_create(&pdev->dev, NULL, &ma35_usb_phy_ops);
+	if (IS_ERR(phy))
+		return dev_err_probe(&pdev->dev, PTR_ERR(phy), "Failed to create PHY\n");
+
+	phy_set_drvdata(phy, p_phy);
+
+	provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
+	if (IS_ERR(provider))
+		return dev_err_probe(&pdev->dev, PTR_ERR(provider),
+				     "Failed to register PHY provider\n");
+	return 0;
+}
+
+static const struct of_device_id ma35_usb_phy_of_match[] = {
+	{ .compatible = "nuvoton,ma35d1-usb2-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ma35_usb_phy_of_match);
+
+static struct platform_driver ma35_usb_phy_driver = {
+	.probe		= ma35_usb_phy_probe,
+	.driver	= {
+		.name	= "ma35d1-usb2-phy",
+		.of_match_table = ma35_usb_phy_of_match,
+	},
+};
+module_platform_driver(ma35_usb_phy_driver);
+
+MODULE_DESCRIPTION("Nuvoton ma35d1 USB2.0 PHY driver");
+MODULE_AUTHOR("Hui-Ping Chen <hpchen0nvt@gmail.com>");
+MODULE_LICENSE("GPL");

drivers/phy/phy-airoha-pcie.c

@@ -18,6 +18,9 @@
 #define LEQ_LEN_CTRL_MAX_VAL	7
 #define FREQ_LOCK_MAX_ATTEMPT	10
 
+/* PCIe-PHY initialization time in ms needed by the hw to complete */
+#define PHY_HW_INIT_TIME_MS	30
+
 enum airoha_pcie_port_gen {
 	PCIE_PORT_GEN1 = 1,
 	PCIE_PORT_GEN2,
@@ -1181,7 +1184,8 @@ static int airoha_pcie_phy_init(struct phy *phy)
 	airoha_phy_pma1_set_bits(pcie_phy, REG_PCIE_PMA_SS_DA_XPON_PWDB0,
 				 PCIE_DA_XPON_CDR_PR_PWDB);
 
-	usleep_range(100, 200);
+	/* Wait for the PCIe PHY to complete initialization before returning */
+	msleep(PHY_HW_INIT_TIME_MS);
 
 	return 0;
 }

drivers/phy/qualcomm/phy-qcom-qmp-combo.c

@@ -2190,23 +2190,24 @@ static int qmp_combo_dp_serdes_init(struct qmp_combo *qmp)
 	void __iomem *serdes = qmp->dp_serdes;
 	const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
 
-	qmp_configure(serdes, cfg->dp_serdes_tbl, cfg->dp_serdes_tbl_num);
+	qmp_configure(qmp->dev, serdes, cfg->dp_serdes_tbl,
+		      cfg->dp_serdes_tbl_num);
 
 	switch (dp_opts->link_rate) {
 	case 1620:
-		qmp_configure(serdes, cfg->serdes_tbl_rbr,
+		qmp_configure(qmp->dev, serdes, cfg->serdes_tbl_rbr,
 			      cfg->serdes_tbl_rbr_num);
 		break;
 	case 2700:
-		qmp_configure(serdes, cfg->serdes_tbl_hbr,
+		qmp_configure(qmp->dev, serdes, cfg->serdes_tbl_hbr,
 			      cfg->serdes_tbl_hbr_num);
 		break;
 	case 5400:
-		qmp_configure(serdes, cfg->serdes_tbl_hbr2,
+		qmp_configure(qmp->dev, serdes, cfg->serdes_tbl_hbr2,
 			      cfg->serdes_tbl_hbr2_num);
 		break;
 	case 8100:
-		qmp_configure(serdes, cfg->serdes_tbl_hbr3,
+		qmp_configure(qmp->dev, serdes, cfg->serdes_tbl_hbr3,
 			      cfg->serdes_tbl_hbr3_num);
 		break;
 	default:
@@ -2807,8 +2808,8 @@ static int qmp_combo_dp_power_on(struct phy *phy)
 
 	qmp_combo_dp_serdes_init(qmp);
 
-	qmp_configure_lane(tx, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 1);
-	qmp_configure_lane(tx2, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 2);
+	qmp_configure_lane(qmp->dev, tx, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 1);
+	qmp_configure_lane(qmp->dev, tx2, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 2);
 
 	/* Configure special DP tx tunings */
 	cfg->configure_dp_tx(qmp);
@@ -2850,7 +2851,7 @@ static int qmp_combo_usb_power_on(struct phy *phy)
 	unsigned int val;
 	int ret;
 
-	qmp_configure(serdes, cfg->serdes_tbl, cfg->serdes_tbl_num);
+	qmp_configure(qmp->dev, serdes, cfg->serdes_tbl, cfg->serdes_tbl_num);
 
 	ret = clk_prepare_enable(qmp->pipe_clk);
 	if (ret) {
@@ -2859,16 +2860,17 @@ static int qmp_combo_usb_power_on(struct phy *phy)
 	}
 
 	/* Tx, Rx, and PCS configurations */
-	qmp_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
-	qmp_configure_lane(tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
+	qmp_configure_lane(qmp->dev, tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
+	qmp_configure_lane(qmp->dev, tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
 
-	qmp_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
-	qmp_configure_lane(rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
+	qmp_configure_lane(qmp->dev, rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
+	qmp_configure_lane(qmp->dev, rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
 
-	qmp_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+	qmp_configure(qmp->dev, pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
 
 	if (pcs_usb)
-		qmp_configure(pcs_usb, cfg->pcs_usb_tbl, cfg->pcs_usb_tbl_num);
+		qmp_configure(qmp->dev, pcs_usb, cfg->pcs_usb_tbl,
+			      cfg->pcs_usb_tbl_num);
 
 	if (cfg->has_pwrdn_delay)
 		usleep_range(10, 20);

drivers/phy/qualcomm/phy-qcom-qmp-common.h

@@ -9,6 +9,7 @@
 struct qmp_phy_init_tbl {
 	unsigned int offset;
 	unsigned int val;
+	char *name;
 	/*
 	 * mask of lanes for which this register is written
 	 * for cases when second lane needs different values
@@ -20,6 +21,7 @@ struct qmp_phy_init_tbl {
 	{				\
 		.offset = o,		\
 		.val = v,		\
+		.name = #o,		\
 		.lane_mask = 0xff,	\
 	}
 
@@ -27,13 +29,13 @@ struct qmp_phy_init_tbl {
 	{				\
 		.offset = o,		\
 		.val = v,		\
+		.name = #o,		\
 		.lane_mask = l,		\
 	}
 
-static inline void qmp_configure_lane(void __iomem *base,
+static inline void qmp_configure_lane(struct device *dev, void __iomem *base,
 				      const struct qmp_phy_init_tbl tbl[],
-					   int num,
-					   u8 lane_mask)
+				      int num, u8 lane_mask)
 {
 	int i;
 	const struct qmp_phy_init_tbl *t = tbl;
@@ -45,15 +47,16 @@ static inline void qmp_configure_lane(void __iomem *base,
 		if (!(t->lane_mask & lane_mask))
 			continue;
 
+		dev_dbg(dev, "Writing Reg: %s Offset: 0x%04x Val: 0x%02x\n",
+			t->name, t->offset, t->val);
 		writel(t->val, base + t->offset);
 	}
 }
 
-static inline void qmp_configure(void __iomem *base,
-				      const struct qmp_phy_init_tbl tbl[],
-				      int num)
+static inline void qmp_configure(struct device *dev, void __iomem *base,
+				 const struct qmp_phy_init_tbl tbl[], int num)
 {
-	qmp_configure_lane(base, tbl, num, 0xff);
+	qmp_configure_lane(dev, base, tbl, num, 0xff);
 }
 
 #endif

drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c

@@ -288,7 +288,7 @@ static int qmp_pcie_msm8996_serdes_init(struct qmp_phy *qphy)
 	unsigned int val;
 	int ret;
 
-	qmp_configure(serdes, serdes_tbl, serdes_tbl_num);
+	qmp_configure(qmp->dev, serdes, serdes_tbl, serdes_tbl_num);
 
 	qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
 	qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
@@ -431,9 +431,9 @@ static int qmp_pcie_msm8996_power_on(struct phy *phy)
 	}
 
 	/* Tx, Rx, and PCS configurations */
-	qmp_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
-	qmp_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
-	qmp_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+	qmp_configure_lane(qmp->dev, tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
+	qmp_configure_lane(qmp->dev, rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
+	qmp_configure(qmp->dev, pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
 
 	/*
 	 * Pull out PHY from POWER DOWN state.
@@ -725,7 +725,6 @@ static int qmp_pcie_msm8996_probe(struct platform_device *pdev)
 {
 	struct qcom_qmp *qmp;
 	struct device *dev = &pdev->dev;
-	struct device_node *child;
 	struct phy_provider *phy_provider;
 	void __iomem *serdes;
 	const struct qmp_phy_cfg *cfg = NULL;
@@ -773,13 +772,13 @@ static int qmp_pcie_msm8996_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	id = 0;
-	for_each_available_child_of_node(dev->of_node, child) {
+	for_each_available_child_of_node_scoped(dev->of_node, child) {
 		/* Create per-lane phy */
 		ret = qmp_pcie_msm8996_create(dev, child, id, serdes, cfg);
 		if (ret) {
 			dev_err(dev, "failed to create lane%d phy, %d\n",
 				id, ret);
-			goto err_node_put;
+			return ret;
 		}
 
 		/*
@@ -790,7 +789,7 @@ static int qmp_pcie_msm8996_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(qmp->dev,
 				"failed to register pipe clock source\n");
-			goto err_node_put;
+			return ret;
 		}
 
 		id++;
@@ -799,10 +798,6 @@ static int qmp_pcie_msm8996_probe(struct platform_device *pdev)
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 
 	return PTR_ERR_OR_ZERO(phy_provider);
-
-err_node_put:
-	of_node_put(child);
-	return ret;
 }
 
 static struct platform_driver qmp_pcie_msm8996_driver = {

drivers/phy/qualcomm/phy-qcom-qmp-pcie.c

@@ -1242,6 +1242,10 @@ static const struct qmp_phy_init_tbl x1e80100_qmp_gen4x2_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_VCO_DC_LEVEL_CTRL, 0x0f),
 };
 
+static const struct qmp_phy_init_tbl x1e80100_qmp_gen4x4_pcie_serdes_4ln_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN, 0x1c),
+};
+
 static const struct qmp_phy_init_tbl x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL, 0x01),
 	QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1, 0x88),
@@ -3654,6 +3658,41 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x2_pciephy_cfg = {
 		.ln_shrd		= x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl,
 		.ln_shrd_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl),
 	},
+
+	.reset_list		= sdm845_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
+	.vreg_list		= sm8550_qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
+	.regs			= pciephy_v6_regs_layout,
+
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.phy_status		= PHYSTATUS_4_20,
+	.has_nocsr_reset	= true,
+};
+
+static const struct qmp_phy_cfg x1e80100_qmp_gen4x4_pciephy_cfg = {
+	.lanes = 4,
+
+	.offsets		= &qmp_pcie_offsets_v6_20,
+
+	.tbls = {
+		.serdes			= x1e80100_qmp_gen4x2_pcie_serdes_tbl,
+		.serdes_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_serdes_tbl),
+		.tx			= x1e80100_qmp_gen4x2_pcie_tx_tbl,
+		.tx_num			= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_tx_tbl),
+		.rx			= x1e80100_qmp_gen4x2_pcie_rx_tbl,
+		.rx_num			= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_rx_tbl),
+		.pcs			= x1e80100_qmp_gen4x2_pcie_pcs_tbl,
+		.pcs_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_pcs_tbl),
+		.pcs_misc		= x1e80100_qmp_gen4x2_pcie_pcs_misc_tbl,
+		.pcs_misc_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_pcs_misc_tbl),
+		.ln_shrd		= x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl,
+		.ln_shrd_num		= ARRAY_SIZE(x1e80100_qmp_gen4x2_pcie_ln_shrd_tbl),
+	},
+
+	.serdes_4ln_tbl		= x1e80100_qmp_gen4x4_pcie_serdes_4ln_tbl,
+	.serdes_4ln_num		= ARRAY_SIZE(x1e80100_qmp_gen4x4_pcie_serdes_4ln_tbl),
+
 	.reset_list		= sdm845_pciephy_reset_l,
 	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
 	.vreg_list		= sm8550_qmp_phy_vreg_l,
@@ -3669,18 +3708,30 @@ static void qmp_pcie_init_port_b(struct qmp_pcie *qmp, const struct qmp_phy_cfg_
 {
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
 	const struct qmp_pcie_offsets *offs = cfg->offsets;
-	void __iomem *tx3, *rx3, *tx4, *rx4;
+	void __iomem *serdes, *tx3, *rx3, *tx4, *rx4, *pcs, *pcs_misc, *ln_shrd;
 
+	serdes = qmp->port_b + offs->serdes;
 	tx3 = qmp->port_b + offs->tx;
 	rx3 = qmp->port_b + offs->rx;
 	tx4 = qmp->port_b + offs->tx2;
 	rx4 = qmp->port_b + offs->rx2;
+	pcs = qmp->port_b + offs->pcs;
+	pcs_misc = qmp->port_b + offs->pcs_misc;
+	ln_shrd = qmp->port_b + offs->ln_shrd;
 
-	qmp_configure_lane(tx3, tbls->tx, tbls->tx_num, 1);
-	qmp_configure_lane(rx3, tbls->rx, tbls->rx_num, 1);
+	qmp_configure(qmp->dev, serdes, tbls->serdes, tbls->serdes_num);
+	qmp_configure(qmp->dev, serdes, cfg->serdes_4ln_tbl, cfg->serdes_4ln_num);
 
-	qmp_configure_lane(tx4, tbls->tx, tbls->tx_num, 2);
-	qmp_configure_lane(rx4, tbls->rx, tbls->rx_num, 2);
+	qmp_configure_lane(qmp->dev, tx3, tbls->tx, tbls->tx_num, 1);
+	qmp_configure_lane(qmp->dev, rx3, tbls->rx, tbls->rx_num, 1);
+
+	qmp_configure_lane(qmp->dev, tx4, tbls->tx, tbls->tx_num, 2);
+	qmp_configure_lane(qmp->dev, rx4, tbls->rx, tbls->rx_num, 2);
+
+	qmp_configure(qmp->dev, pcs, tbls->pcs, tbls->pcs_num);
+	qmp_configure(qmp->dev, pcs_misc, tbls->pcs_misc, tbls->pcs_misc_num);
+
+	qmp_configure(qmp->dev, ln_shrd, tbls->ln_shrd, tbls->ln_shrd_num);
 }
 
 static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tbls *tbls)
@@ -3698,25 +3749,26 @@ static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_c
 	if (!tbls)
 		return;
 
-	qmp_configure(serdes, tbls->serdes, tbls->serdes_num);
+	qmp_configure(qmp->dev, serdes, tbls->serdes, tbls->serdes_num);
 
-	qmp_configure_lane(tx, tbls->tx, tbls->tx_num, 1);
-	qmp_configure_lane(rx, tbls->rx, tbls->rx_num, 1);
+	qmp_configure_lane(qmp->dev, tx, tbls->tx, tbls->tx_num, 1);
+	qmp_configure_lane(qmp->dev, rx, tbls->rx, tbls->rx_num, 1);
 
 	if (cfg->lanes >= 2) {
-		qmp_configure_lane(tx2, tbls->tx, tbls->tx_num, 2);
-		qmp_configure_lane(rx2, tbls->rx, tbls->rx_num, 2);
+		qmp_configure_lane(qmp->dev, tx2, tbls->tx, tbls->tx_num, 2);
+		qmp_configure_lane(qmp->dev, rx2, tbls->rx, tbls->rx_num, 2);
 	}
 
-	qmp_configure(pcs, tbls->pcs, tbls->pcs_num);
-	qmp_configure(pcs_misc, tbls->pcs_misc, tbls->pcs_misc_num);
+	qmp_configure(qmp->dev, pcs, tbls->pcs, tbls->pcs_num);
+	qmp_configure(qmp->dev, pcs_misc, tbls->pcs_misc, tbls->pcs_misc_num);
 
 	if (cfg->lanes >= 4 && qmp->tcsr_4ln_config) {
-		qmp_configure(serdes, cfg->serdes_4ln_tbl, cfg->serdes_4ln_num);
+		qmp_configure(qmp->dev, serdes, cfg->serdes_4ln_tbl,
+			      cfg->serdes_4ln_num);
 		qmp_pcie_init_port_b(qmp, tbls);
 	}
 
-	qmp_configure(ln_shrd, tbls->ln_shrd, tbls->ln_shrd_num);
+	qmp_configure(qmp->dev, ln_shrd, tbls->ln_shrd, tbls->ln_shrd_num);
 }
 
 static int qmp_pcie_init(struct phy *phy)
@@ -4423,6 +4475,9 @@ static const struct of_device_id qmp_pcie_of_match_table[] = {
 	}, {
 		.compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy",
 		.data = &x1e80100_qmp_gen4x2_pciephy_cfg,
+	}, {
+		.compatible = "qcom,x1e80100-qmp-gen4x4-pcie-phy",
+		.data = &x1e80100_qmp_gen4x4_pciephy_cfg,
 	},
 	{ },
 };

drivers/phy/qualcomm/phy-qcom-qmp-ufs.c

@@ -1527,7 +1527,7 @@ static void qmp_ufs_serdes_init(struct qmp_ufs *qmp, const struct qmp_phy_cfg_tb
 {
 	void __iomem *serdes = qmp->serdes;
 
-	qmp_configure(serdes, tbls->serdes, tbls->serdes_num);
+	qmp_configure(qmp->dev, serdes, tbls->serdes, tbls->serdes_num);
 }
 
 static void qmp_ufs_lanes_init(struct qmp_ufs *qmp, const struct qmp_phy_cfg_tbls *tbls)
@@ -1536,12 +1536,12 @@ static void qmp_ufs_lanes_init(struct qmp_ufs *qmp, const struct qmp_phy_cfg_tbl
 	void __iomem *tx = qmp->tx;
 	void __iomem *rx = qmp->rx;
 
-	qmp_configure_lane(tx, tbls->tx, tbls->tx_num, 1);
-	qmp_configure_lane(rx, tbls->rx, tbls->rx_num, 1);
+	qmp_configure_lane(qmp->dev, tx, tbls->tx, tbls->tx_num, 1);
+	qmp_configure_lane(qmp->dev, rx, tbls->rx, tbls->rx_num, 1);
 
 	if (cfg->lanes >= 2) {
-		qmp_configure_lane(qmp->tx2, tbls->tx, tbls->tx_num, 2);
-		qmp_configure_lane(qmp->rx2, tbls->rx, tbls->rx_num, 2);
+		qmp_configure_lane(qmp->dev, qmp->tx2, tbls->tx, tbls->tx_num, 2);
+		qmp_configure_lane(qmp->dev, qmp->rx2, tbls->rx, tbls->rx_num, 2);
 	}
 }
 
@@ -1549,7 +1549,7 @@ static void qmp_ufs_pcs_init(struct qmp_ufs *qmp, const struct qmp_phy_cfg_tbls
 {
 	void __iomem *pcs = qmp->pcs;
 
-	qmp_configure(pcs, tbls->pcs, tbls->pcs_num);
+	qmp_configure(qmp->dev, pcs, tbls->pcs, tbls->pcs_num);
 }
 
 static int qmp_ufs_get_gear_overlay(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg)

drivers/phy/qualcomm/phy-qcom-qmp-usb.c

@@ -1649,7 +1649,7 @@ static int qmp_usb_serdes_init(struct qmp_usb *qmp)
 	const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
 	int serdes_tbl_num = cfg->serdes_tbl_num;
 
-	qmp_configure(serdes, serdes_tbl, serdes_tbl_num);
+	qmp_configure(qmp->dev, serdes, serdes_tbl, serdes_tbl_num);
 
 	return 0;
 }
@@ -1730,13 +1730,13 @@ static int qmp_usb_power_on(struct phy *phy)
 	}
 
 	/* Tx, Rx, and PCS configurations */
-	qmp_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
-	qmp_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
+	qmp_configure_lane(qmp->dev, tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
+	qmp_configure_lane(qmp->dev, rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
 
-	qmp_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+	qmp_configure(qmp->dev, pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
 
 	if (pcs_usb)
-		qmp_configure(pcs_usb, cfg->pcs_usb_tbl, cfg->pcs_usb_tbl_num);
+		qmp_configure(qmp->dev, pcs_usb, cfg->pcs_usb_tbl, cfg->pcs_usb_tbl_num);
 
 	if (cfg->has_pwrdn_delay)
 		usleep_range(10, 20);

drivers/phy/qualcomm/phy-qcom-qmp-usbc.c

@@ -526,7 +526,8 @@ static int qmp_usbc_power_on(struct phy *phy)
 	unsigned int val;
 	int ret;
 
-	qmp_configure(qmp->serdes, cfg->serdes_tbl, cfg->serdes_tbl_num);
+	qmp_configure(qmp->dev, qmp->serdes, cfg->serdes_tbl,
+		      cfg->serdes_tbl_num);
 
 	ret = clk_prepare_enable(qmp->pipe_clk);
 	if (ret) {
@@ -535,13 +536,13 @@ static int qmp_usbc_power_on(struct phy *phy)
 	}
 
 	/* Tx, Rx, and PCS configurations */
-	qmp_configure_lane(qmp->tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
-	qmp_configure_lane(qmp->rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
+	qmp_configure_lane(qmp->dev, qmp->tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
+	qmp_configure_lane(qmp->dev, qmp->rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
 
-	qmp_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
-	qmp_configure_lane(qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
+	qmp_configure_lane(qmp->dev, qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
+	qmp_configure_lane(qmp->dev, qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
 
-	qmp_configure(qmp->pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+	qmp_configure(qmp->dev, qmp->pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
 
 	/* Pull PHY out of reset state */
 	qphy_clrbits(qmp->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);

drivers/phy/renesas/phy-rcar-gen3-usb2.c

@@ -19,12 +19,14 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
+#include <linux/reset.h>
 #include <linux/string.h>
 #include <linux/usb/of.h>
 #include <linux/workqueue.h>
 
 /******* USB2.0 Host registers (original offset is +0x200) *******/
 #define USB2_INT_ENABLE		0x000
+#define USB2_AHB_BUS_CTR	0x008
 #define USB2_USBCTR		0x00c
 #define USB2_SPD_RSM_TIMSET	0x10c
 #define USB2_OC_TIMSET		0x110
@@ -40,6 +42,10 @@
 #define USB2_INT_ENABLE_USBH_INTB_EN	BIT(2)	/* For EHCI */
 #define USB2_INT_ENABLE_USBH_INTA_EN	BIT(1)	/* For OHCI */
 
+/* AHB_BUS_CTR */
+#define USB2_AHB_BUS_CTR_MBL_MASK	GENMASK(1, 0)
+#define USB2_AHB_BUS_CTR_MBL_INCR4	2
+
 /* USBCTR */
 #define USB2_USBCTR_DIRPD	BIT(2)
 #define USB2_USBCTR_PLL_RST	BIT(1)
@@ -111,6 +117,7 @@ struct rcar_gen3_chan {
 	struct extcon_dev *extcon;
 	struct rcar_gen3_phy rphys[NUM_OF_PHYS];
 	struct regulator *vbus;
+	struct reset_control *rstc;
 	struct work_struct work;
 	struct mutex lock;	/* protects rphys[...].powered */
 	enum usb_dr_mode dr_mode;
@@ -125,6 +132,7 @@ struct rcar_gen3_chan {
 struct rcar_gen3_phy_drv_data {
 	const struct phy_ops *phy_usb2_ops;
 	bool no_adp_ctrl;
+	bool init_bus;
 };
 
 /*
@@ -575,6 +583,12 @@ static const struct rcar_gen3_phy_drv_data rz_g2l_phy_usb2_data = {
 	.no_adp_ctrl = true,
 };
 
+static const struct rcar_gen3_phy_drv_data rz_g3s_phy_usb2_data = {
+	.phy_usb2_ops = &rcar_gen3_phy_usb2_ops,
+	.no_adp_ctrl = true,
+	.init_bus = true,
+};
+
 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 	{
 		.compatible = "renesas,usb2-phy-r8a77470",
@@ -596,6 +610,10 @@ static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 		.compatible = "renesas,rzg2l-usb2-phy",
 		.data = &rz_g2l_phy_usb2_data,
 	},
+	{
+		.compatible = "renesas,usb2-phy-r9a08g045",
+		.data = &rz_g3s_phy_usb2_data,
+	},
 	{
 		.compatible = "renesas,rcar-gen3-usb2-phy",
 		.data = &rcar_gen3_phy_usb2_data,
@@ -650,6 +668,35 @@ static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np)
 	return candidate;
 }
 
+static int rcar_gen3_phy_usb2_init_bus(struct rcar_gen3_chan *channel)
+{
+	struct device *dev = channel->dev;
+	int ret;
+	u32 val;
+
+	channel->rstc = devm_reset_control_array_get_shared(dev);
+	if (IS_ERR(channel->rstc))
+		return PTR_ERR(channel->rstc);
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return ret;
+
+	ret = reset_control_deassert(channel->rstc);
+	if (ret)
+		goto rpm_put;
+
+	val = readl(channel->base + USB2_AHB_BUS_CTR);
+	val &= ~USB2_AHB_BUS_CTR_MBL_MASK;
+	val |= USB2_AHB_BUS_CTR_MBL_INCR4;
+	writel(val, channel->base + USB2_AHB_BUS_CTR);
+
+rpm_put:
+	pm_runtime_put(dev);
+
+	return ret;
+}
+
 static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 {
 	const struct rcar_gen3_phy_drv_data *phy_data;
@@ -703,6 +750,15 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 		goto error;
 	}
 
+	platform_set_drvdata(pdev, channel);
+	channel->dev = dev;
+
+	if (phy_data->init_bus) {
+		ret = rcar_gen3_phy_usb2_init_bus(channel);
+		if (ret)
+			goto error;
+	}
+
 	channel->soc_no_adp_ctrl = phy_data->no_adp_ctrl;
 	if (phy_data->no_adp_ctrl)
 		channel->obint_enable_bits = USB2_OBINT_IDCHG_EN;
@@ -733,9 +789,6 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 		channel->vbus = NULL;
 	}
 
-	platform_set_drvdata(pdev, channel);
-	channel->dev = dev;
-
 	provider = devm_of_phy_provider_register(dev, rcar_gen3_phy_usb2_xlate);
 	if (IS_ERR(provider)) {
 		dev_err(dev, "Failed to register PHY provider\n");
@@ -762,6 +815,7 @@ static void rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
 	if (channel->is_otg_channel)
 		device_remove_file(&pdev->dev, &dev_attr_role);
 
+	reset_control_assert(channel->rstc);
 	pm_runtime_disable(&pdev->dev);
 };
 

drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c

@@ -8,6 +8,7 @@
  */
 #include <linux/bitfield.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
@@ -15,6 +16,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/rational.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
@@ -190,6 +192,8 @@
 #define LN3_TX_SER_RATE_SEL_HBR2	BIT(3)
 #define LN3_TX_SER_RATE_SEL_HBR3	BIT(2)
 
+#define HDMI20_MAX_RATE			600000000
+
 struct lcpll_config {
 	u32 bit_rate;
 	u8 lcvco_mode_en;
@@ -272,6 +276,12 @@ struct rk_hdptx_phy {
 	struct clk_bulk_data *clks;
 	int nr_clks;
 	struct reset_control_bulk_data rsts[RST_MAX];
+
+	/* clk provider */
+	struct clk_hw hw;
+	unsigned long rate;
+
+	atomic_t usage_count;
 };
 
 static const struct ropll_config ropll_tmds_cfg[] = {
@@ -759,6 +769,8 @@ static int rk_hdptx_ropll_tmds_cmn_config(struct rk_hdptx_phy *hdptx,
 	struct ropll_config rc = {0};
 	int i;
 
+	hdptx->rate = rate * 100;
+
 	for (i = 0; i < ARRAY_SIZE(ropll_tmds_cfg); i++)
 		if (rate == ropll_tmds_cfg[i].bit_rate) {
 			cfg = &ropll_tmds_cfg[i];
@@ -822,19 +834,6 @@ static int rk_hdptx_ropll_tmds_cmn_config(struct rk_hdptx_phy *hdptx,
 static int rk_hdptx_ropll_tmds_mode_config(struct rk_hdptx_phy *hdptx,
 					   unsigned int rate)
 {
-	u32 val;
-	int ret;
-
-	ret = regmap_read(hdptx->grf, GRF_HDPTX_STATUS, &val);
-	if (ret)
-		return ret;
-
-	if (!(val & HDPTX_O_PLL_LOCK_DONE)) {
-		ret = rk_hdptx_ropll_tmds_cmn_config(hdptx, rate);
-		if (ret)
-			return ret;
-	}
-
 	rk_hdptx_multi_reg_write(hdptx, rk_hdtpx_common_sb_init_seq);
 
 	regmap_write(hdptx->regmap, LNTOP_REG(0200), 0x06);
@@ -856,10 +855,68 @@ static int rk_hdptx_ropll_tmds_mode_config(struct rk_hdptx_phy *hdptx,
 	return rk_hdptx_post_enable_lane(hdptx);
 }
 
+static int rk_hdptx_phy_consumer_get(struct rk_hdptx_phy *hdptx,
+				     unsigned int rate)
+{
+	u32 status;
+	int ret;
+
+	if (atomic_inc_return(&hdptx->usage_count) > 1)
+		return 0;
+
+	ret = regmap_read(hdptx->grf, GRF_HDPTX_STATUS, &status);
+	if (ret)
+		goto dec_usage;
+
+	if (status & HDPTX_O_PLL_LOCK_DONE)
+		dev_warn(hdptx->dev, "PLL locked by unknown consumer!\n");
+
+	if (rate) {
+		ret = rk_hdptx_ropll_tmds_cmn_config(hdptx, rate);
+		if (ret)
+			goto dec_usage;
+	}
+
+	return 0;
+
+dec_usage:
+	atomic_dec(&hdptx->usage_count);
+	return ret;
+}
+
+static int rk_hdptx_phy_consumer_put(struct rk_hdptx_phy *hdptx, bool force)
+{
+	u32 status;
+	int ret;
+
+	ret = atomic_dec_return(&hdptx->usage_count);
+	if (ret > 0)
+		return 0;
+
+	if (ret < 0) {
+		dev_warn(hdptx->dev, "Usage count underflow!\n");
+		ret = -EINVAL;
+	} else {
+		ret = regmap_read(hdptx->grf, GRF_HDPTX_STATUS, &status);
+		if (!ret) {
+			if (status & HDPTX_O_PLL_LOCK_DONE)
+				rk_hdptx_phy_disable(hdptx);
+			return 0;
+		} else if (force) {
+			return 0;
+		}
+	}
+
+	atomic_inc(&hdptx->usage_count);
+	return ret;
+}
+
 static int rk_hdptx_phy_power_on(struct phy *phy)
 {
 	struct rk_hdptx_phy *hdptx = phy_get_drvdata(phy);
-	int ret, bus_width = phy_get_bus_width(hdptx->phy);
+	int bus_width = phy_get_bus_width(hdptx->phy);
+	int ret;
+
 	/*
 	 * FIXME: Temporary workaround to pass pixel_clk_rate
 	 * from the HDMI bridge driver until phy_configure_opts_hdmi
@@ -870,15 +927,13 @@ static int rk_hdptx_phy_power_on(struct phy *phy)
 	dev_dbg(hdptx->dev, "%s bus_width=%x rate=%u\n",
 		__func__, bus_width, rate);
 
-	ret = pm_runtime_resume_and_get(hdptx->dev);
-	if (ret) {
-		dev_err(hdptx->dev, "Failed to resume phy: %d\n", ret);
+	ret = rk_hdptx_phy_consumer_get(hdptx, rate);
+	if (ret)
 		return ret;
-	}
 
 	ret = rk_hdptx_ropll_tmds_mode_config(hdptx, rate);
 	if (ret)
-		pm_runtime_put(hdptx->dev);
+		rk_hdptx_phy_consumer_put(hdptx, true);
 
 	return ret;
 }
@@ -886,16 +941,8 @@ static int rk_hdptx_phy_power_on(struct phy *phy)
 static int rk_hdptx_phy_power_off(struct phy *phy)
 {
 	struct rk_hdptx_phy *hdptx = phy_get_drvdata(phy);
-	u32 val;
-	int ret;
 
-	ret = regmap_read(hdptx->grf, GRF_HDPTX_STATUS, &val);
-	if (ret == 0 && (val & HDPTX_O_PLL_LOCK_DONE))
-		rk_hdptx_phy_disable(hdptx);
-
-	pm_runtime_put(hdptx->dev);
-
-	return ret;
+	return rk_hdptx_phy_consumer_put(hdptx, false);
 }
 
 static const struct phy_ops rk_hdptx_phy_ops = {
@@ -904,6 +951,99 @@ static const struct phy_ops rk_hdptx_phy_ops = {
 	.owner	   = THIS_MODULE,
 };
 
+static struct rk_hdptx_phy *to_rk_hdptx_phy(struct clk_hw *hw)
+{
+	return container_of(hw, struct rk_hdptx_phy, hw);
+}
+
+static int rk_hdptx_phy_clk_prepare(struct clk_hw *hw)
+{
+	struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
+
+	return rk_hdptx_phy_consumer_get(hdptx, hdptx->rate / 100);
+}
+
+static void rk_hdptx_phy_clk_unprepare(struct clk_hw *hw)
+{
+	struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
+
+	rk_hdptx_phy_consumer_put(hdptx, true);
+}
+
+static unsigned long rk_hdptx_phy_clk_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
+
+	return hdptx->rate;
+}
+
+static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long *parent_rate)
+{
+	u32 bit_rate = rate / 100;
+	int i;
+
+	if (rate > HDMI20_MAX_RATE)
+		return rate;
+
+	for (i = 0; i < ARRAY_SIZE(ropll_tmds_cfg); i++)
+		if (bit_rate == ropll_tmds_cfg[i].bit_rate)
+			break;
+
+	if (i == ARRAY_SIZE(ropll_tmds_cfg) &&
+	    !rk_hdptx_phy_clk_pll_calc(bit_rate, NULL))
+		return -EINVAL;
+
+	return rate;
+}
+
+static int rk_hdptx_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long parent_rate)
+{
+	struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
+
+	return rk_hdptx_ropll_tmds_cmn_config(hdptx, rate / 100);
+}
+
+static const struct clk_ops hdptx_phy_clk_ops = {
+	.prepare = rk_hdptx_phy_clk_prepare,
+	.unprepare = rk_hdptx_phy_clk_unprepare,
+	.recalc_rate = rk_hdptx_phy_clk_recalc_rate,
+	.round_rate = rk_hdptx_phy_clk_round_rate,
+	.set_rate = rk_hdptx_phy_clk_set_rate,
+};
+
+static int rk_hdptx_phy_clk_register(struct rk_hdptx_phy *hdptx)
+{
+	struct device *dev = hdptx->dev;
+	const char *name, *pname;
+	struct clk *refclk;
+	int ret, id;
+
+	refclk = devm_clk_get(dev, "ref");
+	if (IS_ERR(refclk))
+		return dev_err_probe(dev, PTR_ERR(refclk),
+				     "Failed to get ref clock\n");
+
+	id = of_alias_get_id(dev->of_node, "hdptxphy");
+	name = id > 0 ? "clk_hdmiphy_pixel1" : "clk_hdmiphy_pixel0";
+	pname = __clk_get_name(refclk);
+
+	hdptx->hw.init = CLK_HW_INIT(name, pname, &hdptx_phy_clk_ops,
+				     CLK_GET_RATE_NOCACHE);
+
+	ret = devm_clk_hw_register(dev, &hdptx->hw);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to register clock\n");
+
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, &hdptx->hw);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to register clk provider\n");
+	return 0;
+}
+
 static int rk_hdptx_phy_runtime_suspend(struct device *dev)
 {
 	struct rk_hdptx_phy *hdptx = dev_get_drvdata(dev);
@@ -976,6 +1116,10 @@ static int rk_hdptx_phy_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(hdptx->grf),
 				     "Could not get GRF syscon\n");
 
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
+
 	hdptx->phy = devm_phy_create(dev, NULL, &rk_hdptx_phy_ops);
 	if (IS_ERR(hdptx->phy))
 		return dev_err_probe(dev, PTR_ERR(hdptx->phy),
@@ -985,10 +1129,6 @@ static int rk_hdptx_phy_probe(struct platform_device *pdev)
 	phy_set_drvdata(hdptx->phy, hdptx);
 	phy_set_bus_width(hdptx->phy, 8);
 
-	ret = devm_pm_runtime_enable(dev);
-	if (ret)
-		return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
-
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 	if (IS_ERR(phy_provider))
 		return dev_err_probe(dev, PTR_ERR(phy_provider),
@@ -998,7 +1138,7 @@ static int rk_hdptx_phy_probe(struct platform_device *pdev)
 	reset_control_deassert(hdptx->rsts[RST_CMN].rstc);
 	reset_control_deassert(hdptx->rsts[RST_INIT].rstc);
 
-	return 0;
+	return rk_hdptx_phy_clk_register(hdptx);
 }
 
 static const struct dev_pm_ops rk_hdptx_phy_pm_ops = {

drivers/phy/samsung/phy-exynos5-usbdrd.c

@@ -607,7 +607,7 @@ exynos5_usbdrd_usbdp_g2_v4_ctrl_pma_ready(struct exynos5_usbdrd_phy *phy_drd)
 
 	reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL);
 	reg &= ~SECPMACTL_PMA_REF_FREQ_SEL;
-	reg |= FIELD_PREP_CONST(SECPMACTL_PMA_REF_FREQ_SEL, 1);
+	reg |= FIELD_PREP(SECPMACTL_PMA_REF_FREQ_SEL, 1);
 	/* SFR reset */
 	reg |= (SECPMACTL_PMA_LOW_PWR | SECPMACTL_PMA_APB_SW_RST);
 	reg &= ~(SECPMACTL_PMA_ROPLL_REF_CLK_SEL |
@@ -1123,19 +1123,19 @@ static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
 	reg &= ~SSPPLLCTL_FSEL;
 	switch (phy_drd->extrefclk) {
 	case EXYNOS5_FSEL_50MHZ:
-		reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 7);
+		reg |= FIELD_PREP(SSPPLLCTL_FSEL, 7);
 		break;
 	case EXYNOS5_FSEL_26MHZ:
-		reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 6);
+		reg |= FIELD_PREP(SSPPLLCTL_FSEL, 6);
 		break;
 	case EXYNOS5_FSEL_24MHZ:
-		reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 2);
+		reg |= FIELD_PREP(SSPPLLCTL_FSEL, 2);
 		break;
 	case EXYNOS5_FSEL_20MHZ:
-		reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 1);
+		reg |= FIELD_PREP(SSPPLLCTL_FSEL, 1);
 		break;
 	case EXYNOS5_FSEL_19MHZ2:
-		reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 0);
+		reg |= FIELD_PREP(SSPPLLCTL_FSEL, 0);
 		break;
 	default:
 		dev_warn(phy_drd->dev, "unsupported ref clk: %#.2x\n",

drivers/phy/ti/phy-am654-serdes.c

@@ -7,6 +7,7 @@
  */
 
 #include <dt-bindings/phy/phy.h>
+#include <linux/cleanup.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
@@ -644,7 +645,6 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
 	struct device_node *node = am654_phy->of_node;
 	struct device *dev = am654_phy->dev;
 	struct serdes_am654_clk_mux *mux;
-	struct device_node *regmap_node;
 	const char **parent_names;
 	struct clk_init_data *init;
 	unsigned int num_parents;
@@ -652,7 +652,6 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
 	const __be32 *addr;
 	unsigned int reg;
 	struct clk *clk;
-	int ret = 0;
 
 	mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
 	if (!mux)
@@ -660,41 +659,30 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
 
 	init = &mux->clk_data;
 
-	regmap_node = of_parse_phandle(node, "ti,serdes-clk", 0);
-	if (!regmap_node) {
-		dev_err(dev, "Fail to get serdes-clk node\n");
-		ret = -ENODEV;
-		goto out_put_node;
-	}
+	struct device_node *regmap_node __free(device_node) =
+		of_parse_phandle(node, "ti,serdes-clk", 0);
+	if (!regmap_node)
+		return dev_err_probe(dev, -ENODEV, "Fail to get serdes-clk node\n");
 
 	regmap = syscon_node_to_regmap(regmap_node->parent);
-	if (IS_ERR(regmap)) {
-		dev_err(dev, "Fail to get Syscon regmap\n");
-		ret = PTR_ERR(regmap);
-		goto out_put_node;
-	}
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				     "Fail to get Syscon regmap\n");
 
 	num_parents = of_clk_get_parent_count(node);
-	if (num_parents < 2) {
-		dev_err(dev, "SERDES clock must have parents\n");
-		ret = -EINVAL;
-		goto out_put_node;
-	}
+	if (num_parents < 2)
+		return dev_err_probe(dev, -EINVAL, "SERDES clock must have parents\n");
 
 	parent_names = devm_kzalloc(dev, (sizeof(char *) * num_parents),
 				    GFP_KERNEL);
-	if (!parent_names) {
-		ret = -ENOMEM;
-		goto out_put_node;
-	}
+	if (!parent_names)
+		return -ENOMEM;
 
 	of_clk_parent_fill(node, parent_names, num_parents);
 
 	addr = of_get_address(regmap_node, 0, NULL, NULL);
-	if (!addr) {
-		ret = -EINVAL;
-		goto out_put_node;
-	}
+	if (!addr)
+		return -EINVAL;
 
 	reg = be32_to_cpu(*addr);
 
@@ -710,16 +698,12 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
 	mux->hw.init = init;
 
 	clk = devm_clk_register(dev, &mux->hw);
-	if (IS_ERR(clk)) {
-		ret = PTR_ERR(clk);
-		goto out_put_node;
-	}
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
 
 	am654_phy->clks[clock_num] = clk;
 
-out_put_node:
-	of_node_put(regmap_node);
-	return ret;
+	return 0;
 }
 
 static const struct of_device_id serdes_am654_id_table[] = {

drivers/phy/ti/phy-gmii-sel.c

@@ -468,11 +468,9 @@ static int phy_gmii_sel_probe(struct platform_device *pdev)
 	priv->regmap = syscon_node_to_regmap(node->parent);
 	if (IS_ERR(priv->regmap)) {
 		priv->regmap = device_node_to_regmap(node);
-		if (IS_ERR(priv->regmap)) {
-			ret = PTR_ERR(priv->regmap);
-			dev_err(dev, "Failed to get syscon %d\n", ret);
-			return ret;
-		}
+		if (IS_ERR(priv->regmap))
+			return dev_err_probe(dev, PTR_ERR(priv->regmap),
+					     "Failed to get syscon\n");
 		priv->no_offset = true;
 	}
 
@@ -485,11 +483,9 @@ static int phy_gmii_sel_probe(struct platform_device *pdev)
 	priv->phy_provider =
 		devm_of_phy_provider_register(dev,
 					      phy_gmii_sel_of_xlate);
-	if (IS_ERR(priv->phy_provider)) {
-		ret = PTR_ERR(priv->phy_provider);
-		dev_err(dev, "Failed to create phy provider %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(priv->phy_provider))
+		return dev_err_probe(dev, PTR_ERR(priv->phy_provider),
+				     "Failed to create phy provider\n");
 
 	return 0;
 }

drivers/phy/ti/phy-j721e-wiz.c

@@ -1179,14 +1179,13 @@ static int wiz_clock_probe(struct wiz *wiz, struct device_node *node)
 
 		ret = wiz_mux_of_clk_register(wiz, clk_node, wiz->mux_sel_field[i],
 					      clk_mux_sel[i].table);
+		of_node_put(clk_node);
 		if (ret) {
 			dev_err_probe(dev, ret, "Failed to register %s clock\n",
 				      node_name);
-			of_node_put(clk_node);
 			goto err;
 		}
 
-		of_node_put(clk_node);
 	}
 
 	for (i = 0; i < wiz->clk_div_sel_num; i++) {
@@ -1199,14 +1198,12 @@ static int wiz_clock_probe(struct wiz *wiz, struct device_node *node)
 
 		ret = wiz_div_clk_register(wiz, clk_node, wiz->div_sel_field[i],
 					   clk_div_sel[i].table);
+		of_node_put(clk_node);
 		if (ret) {
 			dev_err_probe(dev, ret, "Failed to register %s clock\n",
 				      node_name);
-			of_node_put(clk_node);
 			goto err;
 		}
-
-		of_node_put(clk_node);
 	}
 
 	return 0;
@@ -1407,7 +1404,7 @@ MODULE_DEVICE_TABLE(of, wiz_id_table);
 
 static int wiz_get_lane_phy_types(struct device *dev, struct wiz *wiz)
 {
-	struct device_node *serdes, *subnode;
+	struct device_node *serdes;
 
 	serdes = of_get_child_by_name(dev->of_node, "serdes");
 	if (!serdes) {
@@ -1415,7 +1412,7 @@ static int wiz_get_lane_phy_types(struct device *dev, struct wiz *wiz)
 		return -EINVAL;
 	}
 
-	for_each_child_of_node(serdes, subnode) {
+	for_each_child_of_node_scoped(serdes, subnode) {
 		u32 reg, num_lanes = 1, phy_type = PHY_NONE;
 		int ret, i;
 
@@ -1425,7 +1422,6 @@ static int wiz_get_lane_phy_types(struct device *dev, struct wiz *wiz)
 
 		ret = of_property_read_u32(subnode, "reg", &reg);
 		if (ret) {
-			of_node_put(subnode);
 			dev_err(dev,
 				"%s: Reading \"reg\" from \"%s\" failed: %d\n",
 				__func__, subnode->name, ret);
@@ -1578,8 +1574,8 @@ static int wiz_probe(struct platform_device *pdev)
 
 	phy_reset_dev = &wiz->wiz_phy_reset_dev;
 	phy_reset_dev->dev = dev;
-	phy_reset_dev->ops = &wiz_phy_reset_ops,
-	phy_reset_dev->owner = THIS_MODULE,
+	phy_reset_dev->ops = &wiz_phy_reset_ops;
+	phy_reset_dev->owner = THIS_MODULE;
 	phy_reset_dev->of_node = node;
 	/* Reset for each of the lane and one for the entire SERDES */
 	phy_reset_dev->nr_resets = num_lanes + 1;