media: Revert "media: atomisp: Add some ACPI detection info"

This reverts commit 0d64e942.

As gmin_subdev_add() now takes the ACPI handle directly,
we can deprecate the code that were doing this inside each
I2C driver.

PS.: This also reverts commit c03496b3 ("media: atomisp: add a notice about possible leak resources")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

drivers/staging/media/atomisp/i2c/atomisp-gc0310.c

@@ -1310,17 +1310,6 @@ static int gc0310_probe(struct i2c_client *client)
 	int ret;
 	void *pdata;
 	unsigned int i;
-	acpi_handle handle;
-	struct acpi_device *adev;
-
-	handle = ACPI_HANDLE(&client->dev);
-	if (!handle || acpi_bus_get_device(handle, &adev)) {
-		dev_err(&client->dev, "Error could not get ACPI device\n");
-		return -ENODEV;
-	}
-	pr_info("%s: ACPI detected it on bus ID=%s, HID=%s\n",
-		__func__, acpi_device_bid(adev), acpi_device_hid(adev));
-	// FIXME: may need to release resources allocated by acpi_bus_get_device()
 
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev)

drivers/staging/media/atomisp/i2c/atomisp-gc2235.c

@@ -1052,17 +1052,6 @@ static int gc2235_probe(struct i2c_client *client)
 	void *gcpdev;
 	int ret;
 	unsigned int i;
-	acpi_handle handle;
-	struct acpi_device *adev;
-
-	handle = ACPI_HANDLE(&client->dev);
-	if (!handle || acpi_bus_get_device(handle, &adev)) {
-		dev_err(&client->dev, "Error could not get ACPI device\n");
-		return -ENODEV;
-	}
-	pr_info("%s: ACPI detected it on bus ID=%s, HID=%s\n",
-		__func__, acpi_device_bid(adev), acpi_device_hid(adev));
-	// FIXME: may need to release resources allocated by acpi_bus_get_device()
 
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev)

drivers/staging/media/atomisp/i2c/atomisp-lm3554.c

@@ -851,17 +851,6 @@ static int lm3554_probe(struct i2c_client *client)
 	struct lm3554 *flash;
 	unsigned int i;
 	int ret;
-	acpi_handle handle;
-	struct acpi_device *adev;
-
-	handle = ACPI_HANDLE(&client->dev);
-	if (!handle || acpi_bus_get_device(handle, &adev)) {
-		dev_err(&client->dev, "Error could not get ACPI device\n");
-		return -ENODEV;
-	}
-	pr_info("%s: ACPI detected it on bus ID=%s, HID=%s\n",
-		__func__, acpi_device_bid(adev), acpi_device_hid(adev));
-	// FIXME: may need to release resources allocated by acpi_bus_get_device()
 
 	flash = kzalloc(sizeof(*flash), GFP_KERNEL);
 	if (!flash)

drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c

@@ -1817,17 +1817,6 @@ static int mt9m114_probe(struct i2c_client *client)
 	int ret = 0;
 	unsigned int i;
 	void *pdata;
-	acpi_handle handle;
-	struct acpi_device *adev;
-
-	handle = ACPI_HANDLE(&client->dev);
-	if (!handle || acpi_bus_get_device(handle, &adev)) {
-		dev_err(&client->dev, "Error could not get ACPI device\n");
-		return -ENODEV;
-	}
-	pr_info("%s: ACPI detected it on bus ID=%s, HID=%s\n",
-		__func__, acpi_device_bid(adev), acpi_device_hid(adev));
-	// FIXME: may need to release resources allocated by acpi_bus_get_device()
 
 	/* Setup sensor configuration structure */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);

drivers/staging/media/atomisp/i2c/atomisp-ov2680.c

@@ -1244,17 +1244,6 @@ static int ov2680_probe(struct i2c_client *client)
 	int ret;
 	void *pdata;
 	unsigned int i;
-	acpi_handle handle;
-	struct acpi_device *adev;
-
-	handle = ACPI_HANDLE(&client->dev);
-	if (!handle || acpi_bus_get_device(handle, &adev)) {
-		dev_err(&client->dev, "Error could not get ACPI device\n");
-		return -ENODEV;
-	}
-	dev_info(&client->dev, "%s: ACPI detected it on bus ID=%s, HID=%s\n",
-		__func__, acpi_device_bid(adev), acpi_device_hid(adev));
-	// FIXME: may need to release resources allocated by acpi_bus_get_device()
 
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev)

drivers/staging/media/atomisp/i2c/atomisp-ov2722.c

@@ -1215,17 +1215,6 @@ static int ov2722_probe(struct i2c_client *client)
 	struct ov2722_device *dev;
 	void *ovpdev;
 	int ret;
-	acpi_handle handle;
-	struct acpi_device *adev;
-
-	handle = ACPI_HANDLE(&client->dev);
-	if (!handle || acpi_bus_get_device(handle, &adev)) {
-		dev_err(&client->dev, "Error could not get ACPI device\n");
-		return -ENODEV;
-	}
-	pr_info("%s: ACPI detected it on bus ID=%s, HID=%s\n",
-		__func__, acpi_device_bid(adev), acpi_device_hid(adev));
-	// FIXME: may need to release resources allocated by acpi_bus_get_device()
 
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev)

drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c

@@ -1902,17 +1902,6 @@ static int ov5693_probe(struct i2c_client *client)
 	int ret = 0;
 	void *pdata;
 	unsigned int i;
-	acpi_handle handle;
-	struct acpi_device *adev;
-
-	handle = ACPI_HANDLE(&client->dev);
-	if (!handle || acpi_bus_get_device(handle, &adev)) {
-		dev_err(&client->dev, "Error could not get ACPI device\n");
-		return -ENODEV;
-	}
-	pr_info("%s: ACPI detected it on bus ID=%s, HID=%s\n",
-		__func__, acpi_device_bid(adev), acpi_device_hid(adev));
-	// FIXME: may need to release resources allocated by acpi_bus_get_device()
 
 	/*
 	 * Firmware workaround: Some modules use a "secondary default"