Commit fcb10617 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

media: atomisp: TODO: make it updated to the current issues

Now that this driver starting to show signals of real progress,
let's update its TODO list.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+huawei@kernel.org>
parent b2598d9f
For both Cherrytrail (CHT) and Baytrail (BHT) the driver
requires the "candrpv_0415_20150521_0458" firmware version.
It should be noticed that the firmware file is different,
depending on the ISP model, so they're stored with different
names:
- for BHT: /lib/firmware/shisp_2400b0_v21.bin
Warning: The driver was not tested yet for BHT.
- for CHT: /lib/firmware/shisp_2401a0_v21.bin
https://github.com/intel-aero/meta-intel-aero-base/blob/master/recipes-kernel/linux/linux-yocto/shisp_2401a0_v21.bin
NOTE:
=====
While the driver probes the hardware and reports itself as a
V4L2 driver, there are still some issues preventing it to
stream (at least it doesn't with the standard V4L2 applications.
Didn't test yet with some custom-made app for this driver).
Solving the related bugs and issues preventing it to work is
needed (items 6 and 7 from the list below).
This driver currently doesn't work with most V4L2 applications,
as there are still some issues with regards to implementing
certain APIs at the standard way.
Also, currently only USERPTR streaming mode is working.
In order to test, it is needed to know what's the sensor's
resolution. This can be checked with:
$ v4l2-ctl --get-fmt-video
Format Video Capture:
Width/Height : 1600/1200
...
It is known to work with:
- v4l2grab at contrib/test directory at https://git.linuxtv.org/v4l-utils.git/
The resolution should not be bigger than the max resolution
supported by the sensor, or it will fail. So, if the sensor
reports:
The driver can be tested with:
v4l2grab -f YUYV -x 1600 -y 1200 -d /dev/video2 -u
- NVT at https://github.com/intel/nvt
$ ./v4l2n -o testimage_@.raw \
--device /dev/video2 \
--input 0 \
--exposure=30000,30000,30000,30000 \
--parm type=1,capturemode=CI_MODE_PREVIEW \
--fmt type=1,width=1600,height=1200,pixelformat=YUYV \
--reqbufs count=2,memory=USERPTR \
--parameters=wb_config.r=32768,wb_config.gr=21043,wb_config.gb=21043,wb_config.b=30863 \
--capture=20
As the output is in raw format, images need to be converted with:
$ for i in $(seq 0 19); do
name="testimage_$(printf "%03i" $i)"
./raw2pnm -x$WIDTH -y$HEIGHT -f$FORMAT $name.raw $name.pnm
rm $name.raw
done
TODO
====
1. The atomisp doesn't rely at the usual i2c stuff to discover the
1. Fix support for MMAP streaming mode. This is required for most
V4L2 applications;
2. Implement and/or fix V4L2 ioctls in order to allow a normal app to
use it;
3. Ensure that the driver will pass v4l2-compliance tests;
4. Get manufacturer's authorization to redistribute the binaries for
the firmware files;
5. remove VIDEO_ATOMISP_ISP2401, making the driver to auto-detect the
register address differences between ISP2400 and ISP2401;
6. Cleanup the driver code, removing the abstraction layers inside it;
7. The atomisp doesn't rely at the usual i2c stuff to discover the
sensors. Instead, it calls a function from atomisp_gmin_platform.c.
There are some hacks added there for it to wait for sensors to be
probed (with a timeout of 2 seconds or so).
This should be converted to the usual way, using V4L2 async subdev
framework to wait for cameras to be probed;
probed (with a timeout of 2 seconds or so). This should be converted
to the usual way, using V4L2 async subdev framework to wait for
cameras to be probed;
8. Switch to standard V4L2 sub-device API for sensor and lens. In
particular, the user space API needs to support V4L2 controls as
defined in the V4L2 spec and references to atomisp must be removed from
these drivers.
9. Use LED flash API for flash LED drivers such as LM3554 (which already
has a LED class driver).
2. Use ACPI _DSM table - DONE!
10. Migrate the sensor drivers out of staging or re-using existing
drivers;
3. Switch the driver to use pm_runtime stuff. Right now, it probes the
11. Switch the driver to use pm_runtime stuff. Right now, it probes the
existing PMIC code and sensors call it directly.
4. There's a problem at the sensor drivers: when trying to set a video
12. There's a problem on sensor drivers: when trying to set a video
format, the atomisp main driver calls the sensor drivers with the
sensor turned off. This causes them to fail.
The only exception is the atomisp-ov2880, which has a hack inside it
to turn it on when VIDIOC_S_FMT is called.
This was fixed at atomisp-ov2880, which has a hack inside it
to turn it on when VIDIOC_S_FMT is called, but this has to be
cheked on other drivers as well.
The right fix seems to power on the sensor when a video device is
opened (or at the first VIDIOC_ ioctl - except for VIDIOC_QUERYCAP),
......@@ -37,9 +116,9 @@ TODO
Such kind of control would need to be done inside the atomisp driver,
not at the sensors code.
5. There are several issues related to memory management, causing
crashes. The atomisp splits the memory management on three separate
regions:
13. There are several issues related to memory management, that can
cause crashes and/or memory leaks. The atomisp splits the memory
management on three separate regions:
- dynamic pool;
- reserved pool;
......@@ -63,30 +142,20 @@ TODO
But converting it to use something like that is painful and may
cause some breakages.
6. There is some issues at the frame receive logic, causing the
DQBUF ioctls to fail.
7. A single AtomISP driver needs to be implemented to support both
Baytrail (BYT) and Cherrytail (CHT) platforms at the same time.
The current driver is a mechanical and hand combined merge of the
two using several runtime macros, plus some ifdef ISP2401 to select the
CHT version. Yet, there are some ISP-specific headers that change the
driver's behavior during compile time.
8. The file structure needs to get tidied up to resemble a normal Linux
14. The file structure needs to get tidied up to resemble a normal Linux
driver.
9. Lots of the midlayer glue. unused code and abstraction needs removing.
15. Lots of the midlayer glue. Unused code and abstraction needs removing.
10. The AtomISP driver includes some special IOCTLS (ATOMISP_IOC_XXXX_XXXX)
16. The AtomISP driver includes some special IOCTLS (ATOMISP_IOC_XXXX_XXXX)
and controls that require some cleanup. Some of those code may have
been removed during the cleanups. They could be needed in order to
properly support 3A algorithms
properly support 3A algorithms.
Such IOCTL interface needs more documentation. The better would
be to use something close to the interface used by the IPU3 IMGU driver.
11. The ISP code has some dependencies of the exact FW version.
17. The ISP code has some dependencies of the exact FW version.
The version defined in pci/sh_css_firmware.c:
BYT (isp2400): "irci_stable_candrpv_0415_20150521_0458"
......@@ -106,24 +175,16 @@ TODO
there are any specific things that can be done to fold in support for
multiple firmware versions.
12. Switch to standard V4L2 sub-device API for sensor and lens. In
particular, the user space API needs to support V4L2 controls as
defined in the V4L2 spec and references to atomisp must be removed from
these drivers.
13. Use LED flash API for flash LED drivers such as LM3554 (which already
has a LED class driver).
14. Switch from videobuf1 to videobuf2. Videobuf1 is being removed!
18. Switch from videobuf1 to videobuf2. Videobuf1 is being removed!
15. Correct Coding Style. Please refrain sending coding style patches
19. Correct Coding Style. Please refrain sending coding style patches
for this driver until the other work is done, as there will be a lot
of code churn until this driver becomes functional again.
16. Fix private ioctls to not need a compat_ioctl handler for running
32-bit tasks. The compat code has been removed because of bugs,
and should not be needed for modern drivers. Fixing this properly
unfortunately means an incompatible ABI change.
20. Remove the logic which sets up pipelines inside it, moving it to
libcamera and implement MC support.
Limitations
===========
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment