be2net: Bug fix to config NIC appropriately before loopback test

NIC controller has to be set to an appropriate mode before doing a loopback
test. Test will fail otherwise.
Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/benet/be_cmds.c

@@ -1479,6 +1479,41 @@ extern int be_cmd_enable_magic_wol(struct be_adapter *adapter, u8 *mac,
 	return status;
 }
 
+int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
+			u8 loopback_type, u8 enable)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_set_lmode *req;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+
+	req = embedded_payload(wrb);
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+				OPCODE_LOWLEVEL_SET_LOOPBACK_MODE);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
+			OPCODE_LOWLEVEL_SET_LOOPBACK_MODE,
+			sizeof(*req));
+
+	req->src_port = port_num;
+	req->dest_port = port_num;
+	req->loopback_type = loopback_type;
+	req->loopback_state = enable;
+
+	status = be_mcc_notify_wait(adapter);
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
 int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num,
 		u32 loopback_type, u32 pkt_size, u32 num_pkts, u64 pattern)
 {

drivers/net/benet/be_cmds.h

@@ -155,6 +155,7 @@ struct be_mcc_mailbox {
 
 #define OPCODE_LOWLEVEL_HOST_DDR_DMA                    17
 #define OPCODE_LOWLEVEL_LOOPBACK_TEST                   18
+#define OPCODE_LOWLEVEL_SET_LOOPBACK_MODE		19
 
 struct be_cmd_req_hdr {
 	u8 opcode;		/* dword 0 */
@@ -821,6 +822,19 @@ struct be_cmd_resp_loopback_test {
 	u32    ticks_compl;
 };
 
+struct be_cmd_req_set_lmode {
+	struct be_cmd_req_hdr hdr;
+	u8 src_port;
+	u8 dest_port;
+	u8 loopback_type;
+	u8 loopback_state;
+};
+
+struct be_cmd_resp_set_lmode {
+	struct be_cmd_resp_hdr resp_hdr;
+	u8 rsvd0[4];
+};
+
 /********************** DDR DMA test *********************/
 struct be_cmd_req_ddrdma_test {
 	struct be_cmd_req_hdr hdr;
@@ -912,3 +926,5 @@ extern int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num,
 				u32 num_pkts, u64 pattern);
 extern int be_cmd_ddr_dma_test(struct be_adapter *adapter, u64 pattern,
 			u32 byte_cnt, struct be_dma_mem *cmd);
+extern int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
+				u8 loopback_type, u8 enable);

drivers/net/benet/be_ethtool.c

@@ -118,6 +118,7 @@ static const char et_self_tests[][ETH_GSTRING_LEN] = {
 #define BE_MAC_LOOPBACK 0x0
 #define BE_PHY_LOOPBACK 0x1
 #define BE_ONE_PORT_EXT_LOOPBACK 0x2
+#define BE_NO_LOOPBACK 0xff
 
 static void
 be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
@@ -489,6 +490,19 @@ be_test_ddr_dma(struct be_adapter *adapter)
 	return ret;
 }
 
+static u64 be_loopback_test(struct be_adapter *adapter, u8 loopback_type,
+				u64 *status)
+{
+	be_cmd_set_loopback(adapter, adapter->port_num,
+				loopback_type, 1);
+	*status = be_cmd_loopback_test(adapter, adapter->port_num,
+				loopback_type, 1500,
+				2, 0xabc);
+	be_cmd_set_loopback(adapter, adapter->port_num,
+				BE_NO_LOOPBACK, 1);
+	return *status;
+}
+
 static void
 be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
 {
@@ -497,23 +511,18 @@ be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
 	memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM);
 
 	if (test->flags & ETH_TEST_FL_OFFLINE) {
-		data[0] = be_cmd_loopback_test(adapter, adapter->port_num,
-						BE_MAC_LOOPBACK, 1500,
-						2, 0xabc);
-		if (data[0] != 0)
+		if (be_loopback_test(adapter, BE_MAC_LOOPBACK,
+						&data[0]) != 0) {
 			test->flags |= ETH_TEST_FL_FAILED;
-
-		data[1] = be_cmd_loopback_test(adapter, adapter->port_num,
-						BE_PHY_LOOPBACK, 1500,
-						2, 0xabc);
-		if (data[1] != 0)
+		}
+		if (be_loopback_test(adapter, BE_PHY_LOOPBACK,
+						&data[1]) != 0) {
 			test->flags |= ETH_TEST_FL_FAILED;
-
-		data[2] = be_cmd_loopback_test(adapter, adapter->port_num,
-						BE_ONE_PORT_EXT_LOOPBACK,
-						1500, 2, 0xabc);
-		if (data[2] != 0)
+		}
+		if (be_loopback_test(adapter, BE_ONE_PORT_EXT_LOOPBACK,
+						&data[2]) != 0) {
 			test->flags |= ETH_TEST_FL_FAILED;
+		}
 
 		data[3] = be_test_ddr_dma(adapter);
 		if (data[3] != 0)