Commit fe5a66f9 authored by Ville Syrjälä's avatar Ville Syrjälä

drm/i915: Read PSR caps/intermediate freqs/etc. only once on eDP

Currently we re-read a bunch of static eDP panel caps from the DPCD
over and over again. Let's do it only once to save some time and effort.

v2: Make thing less confusing with intel_edp_init_dpcd() (Chris)
    Move no_aux_handshake setup in there as well
v3: Move tps3/rate printout to intel_dp_long_pulse() so that
    we'll still get them on eDP as well

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1469800359-7087-1-git-send-email-ville.syrjala@linux.intel.com
parent 1dd5b6f2
...@@ -3395,45 +3395,34 @@ intel_dp_link_down(struct intel_dp *intel_dp) ...@@ -3395,45 +3395,34 @@ intel_dp_link_down(struct intel_dp *intel_dp)
} }
static bool static bool
intel_dp_get_dpcd(struct intel_dp *intel_dp) intel_dp_read_dpcd(struct intel_dp *intel_dp)
{ {
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
if (drm_dp_dpcd_read(&intel_dp->aux, 0x000, intel_dp->dpcd, if (drm_dp_dpcd_read(&intel_dp->aux, 0x000, intel_dp->dpcd,
sizeof(intel_dp->dpcd)) < 0) sizeof(intel_dp->dpcd)) < 0)
return false; /* aux transfer failed */ return false; /* aux transfer failed */
DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd); DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd);
if (intel_dp->dpcd[DP_DPCD_REV] == 0) return intel_dp->dpcd[DP_DPCD_REV] != 0;
return false; /* DPCD not present */ }
if (drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_COUNT, static bool
&intel_dp->sink_count, 1) < 0) intel_edp_init_dpcd(struct intel_dp *intel_dp)
return false; {
struct drm_i915_private *dev_priv =
to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
/* /* this function is meant to be called only once */
* Sink count can change between short pulse hpd hence WARN_ON(intel_dp->dpcd[DP_DPCD_REV] != 0);
* a member variable in intel_dp will track any changes
* between short pulse interrupts.
*/
intel_dp->sink_count = DP_GET_SINK_COUNT(intel_dp->sink_count);
/* if (!intel_dp_read_dpcd(intel_dp))
* SINK_COUNT == 0 and DOWNSTREAM_PORT_PRESENT == 1 implies that
* a dongle is present but no display. Unless we require to know
* if a dongle is present or not, we don't need to update
* downstream port information. So, an early return here saves
* time from performing other operations which are not required.
*/
if (!is_edp(intel_dp) && !intel_dp->sink_count)
return false; return false;
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
dev_priv->no_aux_handshake = intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
DP_NO_AUX_HANDSHAKE_LINK_TRAINING;
/* Check if the panel supports PSR */ /* Check if the panel supports PSR */
memset(intel_dp->psr_dpcd, 0, sizeof(intel_dp->psr_dpcd));
if (is_edp(intel_dp)) {
drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT, drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT,
intel_dp->psr_dpcd, intel_dp->psr_dpcd,
sizeof(intel_dp->psr_dpcd)); sizeof(intel_dp->psr_dpcd));
...@@ -3442,7 +3431,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) ...@@ -3442,7 +3431,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
DRM_DEBUG_KMS("Detected EDP PSR Panel.\n"); DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
} }
if (INTEL_INFO(dev)->gen >= 9 && if (INTEL_GEN(dev_priv) >= 9 &&
(intel_dp->psr_dpcd[0] & DP_PSR2_IS_SUPPORTED)) { (intel_dp->psr_dpcd[0] & DP_PSR2_IS_SUPPORTED)) {
uint8_t frame_sync_cap; uint8_t frame_sync_cap;
...@@ -3458,21 +3447,15 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) ...@@ -3458,21 +3447,15 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
} }
/* Read the eDP Display control capabilities registers */ /* Read the eDP Display control capabilities registers */
memset(intel_dp->edp_dpcd, 0, sizeof(intel_dp->edp_dpcd));
if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) && if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
(drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV, drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV,
intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd)) == intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd) ==
sizeof(intel_dp->edp_dpcd))) sizeof(intel_dp->edp_dpcd)))
DRM_DEBUG_KMS("EDP DPCD : %*ph\n", (int) sizeof(intel_dp->edp_dpcd), DRM_DEBUG_KMS("EDP DPCD : %*ph\n", (int) sizeof(intel_dp->edp_dpcd),
intel_dp->edp_dpcd); intel_dp->edp_dpcd);
}
DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
yesno(intel_dp_source_supports_hbr2(intel_dp)),
yesno(drm_dp_tps3_supported(intel_dp->dpcd)));
/* Intermediate frequency support */ /* Intermediate frequency support */
if (is_edp(intel_dp) && (intel_dp->edp_dpcd[0] >= 0x03)) { /* eDp v1.4 or higher */ if (intel_dp->edp_dpcd[0] >= 0x03) { /* eDp v1.4 or higher */
__le16 sink_rates[DP_MAX_SUPPORTED_RATES]; __le16 sink_rates[DP_MAX_SUPPORTED_RATES];
int i; int i;
...@@ -3491,7 +3474,36 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) ...@@ -3491,7 +3474,36 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
intel_dp->num_sink_rates = i; intel_dp->num_sink_rates = i;
} }
intel_dp_print_rates(intel_dp); return true;
}
static bool
intel_dp_get_dpcd(struct intel_dp *intel_dp)
{
if (!intel_dp_read_dpcd(intel_dp))
return false;
if (drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_COUNT,
&intel_dp->sink_count, 1) < 0)
return false;
/*
* Sink count can change between short pulse hpd hence
* a member variable in intel_dp will track any changes
* between short pulse interrupts.
*/
intel_dp->sink_count = DP_GET_SINK_COUNT(intel_dp->sink_count);
/*
* SINK_COUNT == 0 and DOWNSTREAM_PORT_PRESENT == 1 implies that
* a dongle is present but no display. Unless we require to know
* if a dongle is present or not, we don't need to update
* downstream port information. So, an early return here saves
* time from performing other operations which are not required.
*/
if (!is_edp(intel_dp) && !intel_dp->sink_count)
return false;
if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
DP_DWN_STRM_PORT_PRESENT)) DP_DWN_STRM_PORT_PRESENT))
...@@ -4252,6 +4264,12 @@ intel_dp_long_pulse(struct intel_connector *intel_connector) ...@@ -4252,6 +4264,12 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
if (intel_encoder->type != INTEL_OUTPUT_EDP) if (intel_encoder->type != INTEL_OUTPUT_EDP)
intel_encoder->type = INTEL_OUTPUT_DP; intel_encoder->type = INTEL_OUTPUT_DP;
DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
yesno(intel_dp_source_supports_hbr2(intel_dp)),
yesno(drm_dp_tps3_supported(intel_dp->dpcd)));
intel_dp_print_rates(intel_dp);
intel_dp_probe_oui(intel_dp); intel_dp_probe_oui(intel_dp);
ret = intel_dp_probe_mst(intel_dp); ret = intel_dp_probe_mst(intel_dp);
...@@ -5413,14 +5431,9 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, ...@@ -5413,14 +5431,9 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
pps_unlock(intel_dp); pps_unlock(intel_dp);
/* Cache DPCD and EDID for edp. */ /* Cache DPCD and EDID for edp. */
has_dpcd = intel_dp_get_dpcd(intel_dp); has_dpcd = intel_edp_init_dpcd(intel_dp);
if (has_dpcd) { if (!has_dpcd) {
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
dev_priv->no_aux_handshake =
intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
DP_NO_AUX_HANDSHAKE_LINK_TRAINING;
} else {
/* if this fails, presume the device is a ghost */ /* if this fails, presume the device is a ghost */
DRM_INFO("failed to retrieve link info, disabling eDP\n"); DRM_INFO("failed to retrieve link info, disabling eDP\n");
goto out_vdd_off; goto out_vdd_off;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment