Skip to content

L
linux
Commit ff834332 authored by Gwendal Grignou's avatar Gwendal Grignou Committed by Lee Jones
Browse files
Options

mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values 

This change is required for compilation of embedded controller firmware
to work properly (See CONFIG_HOSTCMD_SECTION_SORTED).
Signed-off-by: default avatarGwendal Grignou <gwendal@chromium.org>
Acked-by: default avatarEnric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: default avatarBenson Leung <bleung@chromium.org>
Reviewed-by: default avatarFabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 6f72c3f9
Hide whitespace changes
Inline Side-by-side
Showing with 136 additions and 99 deletions
include/linux/mfd/cros_ec_commands.h
View file @ ff834332
...@@ -553,6 +553,9 @@ struct ec_host_response { ...@@ -553,6 +553,9 @@ struct ec_host_response {
* Parameter/response length is implicit in the structs. Some underlying * Parameter/response length is implicit in the structs. Some underlying
* communication protocols (I2C, SPI) may add length or checksum headers, but * communication protocols (I2C, SPI) may add length or checksum headers, but
* those are implementation-dependent and not defined here. * those are implementation-dependent and not defined here.
*
* All commands MUST be #defined to be 4-digit UPPER CASE hex values
* (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work.
*/ */
/*****************************************************************************/ /*****************************************************************************/
...@@ -562,7 +565,7 @@ struct ec_host_response { ...@@ -562,7 +565,7 @@ struct ec_host_response {
* Get protocol version, used to deal with non-backward compatible protocol * Get protocol version, used to deal with non-backward compatible protocol
* changes. * changes.
*/ */
#define EC_CMD_PROTO_VERSION 0x00 #define EC_CMD_PROTO_VERSION 0x0000
/** /**
* struct ec_response_proto_version - Response to the proto version command. * struct ec_response_proto_version - Response to the proto version command.
...@@ -576,7 +579,7 @@ struct ec_response_proto_version { ...@@ -576,7 +579,7 @@ struct ec_response_proto_version {
* Hello. This is a simple command to test the EC is responsive to * Hello. This is a simple command to test the EC is responsive to
* commands. * commands.
*/ */
#define EC_CMD_HELLO 0x01 #define EC_CMD_HELLO 0x0001
/** /**
* struct ec_params_hello - Parameters to the hello command. * struct ec_params_hello - Parameters to the hello command.
...@@ -595,7 +598,7 @@ struct ec_response_hello { ...@@ -595,7 +598,7 @@ struct ec_response_hello {
} __ec_align4; } __ec_align4;
/* Get version number */ /* Get version number */
#define EC_CMD_GET_VERSION 0x02 #define EC_CMD_GET_VERSION 0x0002
enum ec_current_image { enum ec_current_image {
EC_IMAGE_UNKNOWN = 0, EC_IMAGE_UNKNOWN = 0,
...@@ -618,7 +621,7 @@ struct ec_response_get_version { ...@@ -618,7 +621,7 @@ struct ec_response_get_version {
} __ec_align4; } __ec_align4;
/* Read test */ /* Read test */
#define EC_CMD_READ_TEST 0x03 #define EC_CMD_READ_TEST 0x0003
/** /**
* struct ec_params_read_test - Parameters for the read test command. * struct ec_params_read_test - Parameters for the read test command.
...@@ -643,10 +646,10 @@ struct ec_response_read_test { ...@@ -643,10 +646,10 @@ struct ec_response_read_test {
* *
* Response is null-terminated string. * Response is null-terminated string.
*/ */
#define EC_CMD_GET_BUILD_INFO 0x04 #define EC_CMD_GET_BUILD_INFO 0x0004
/* Get chip info */ /* Get chip info */
#define EC_CMD_GET_CHIP_INFO 0x05 #define EC_CMD_GET_CHIP_INFO 0x0005
/** /**
* struct ec_response_get_chip_info - Response to the get chip info command. * struct ec_response_get_chip_info - Response to the get chip info command.
...@@ -661,7 +664,7 @@ struct ec_response_get_chip_info { ...@@ -661,7 +664,7 @@ struct ec_response_get_chip_info {
} __ec_align4; } __ec_align4;
/* Get board HW version */ /* Get board HW version */
#define EC_CMD_GET_BOARD_VERSION 0x06 #define EC_CMD_GET_BOARD_VERSION 0x0006
/** /**
* struct ec_response_board_version - Response to the board version command. * struct ec_response_board_version - Response to the board version command.
...@@ -679,7 +682,7 @@ struct ec_response_board_version { ...@@ -679,7 +682,7 @@ struct ec_response_board_version {
* *
* Response is params.size bytes of data. * Response is params.size bytes of data.
*/ */
#define EC_CMD_READ_MEMMAP 0x07 #define EC_CMD_READ_MEMMAP 0x0007
/** /**
* struct ec_params_read_memmap - Parameters for the read memory map command. * struct ec_params_read_memmap - Parameters for the read memory map command.
...@@ -692,7 +695,7 @@ struct ec_params_read_memmap { ...@@ -692,7 +695,7 @@ struct ec_params_read_memmap {
} __ec_align1; } __ec_align1;
/* Read versions supported for a command */ /* Read versions supported for a command */
#define EC_CMD_GET_CMD_VERSIONS 0x08 #define EC_CMD_GET_CMD_VERSIONS 0x0008
/** /**
* struct ec_params_get_cmd_versions - Parameters for the get command versions. * struct ec_params_get_cmd_versions - Parameters for the get command versions.
...@@ -727,7 +730,7 @@ struct ec_response_get_cmd_versions { ...@@ -727,7 +730,7 @@ struct ec_response_get_cmd_versions {
* lpc must read the status from the command register. Attempting this on * lpc must read the status from the command register. Attempting this on
* lpc will overwrite the args/parameter space and corrupt its data. * lpc will overwrite the args/parameter space and corrupt its data.
*/ */
#define EC_CMD_GET_COMMS_STATUS 0x09 #define EC_CMD_GET_COMMS_STATUS 0x0009
/* Avoid using ec_status which is for return values */ /* Avoid using ec_status which is for return values */
enum ec_comms_status { enum ec_comms_status {
...@@ -744,7 +747,7 @@ struct ec_response_get_comms_status { ...@@ -744,7 +747,7 @@ struct ec_response_get_comms_status {
} __ec_align4; } __ec_align4;
/* Fake a variety of responses, purely for testing purposes. */ /* Fake a variety of responses, purely for testing purposes. */
#define EC_CMD_TEST_PROTOCOL 0x0a #define EC_CMD_TEST_PROTOCOL 0x000A
/* Tell the EC what to send back to us. */ /* Tell the EC what to send back to us. */
struct ec_params_test_protocol { struct ec_params_test_protocol {
...@@ -759,7 +762,7 @@ struct ec_response_test_protocol { ...@@ -759,7 +762,7 @@ struct ec_response_test_protocol {
} __ec_align4; } __ec_align4;
/* Get protocol information */ /* Get protocol information */
#define EC_CMD_GET_PROTOCOL_INFO 0x0b #define EC_CMD_GET_PROTOCOL_INFO 0x000B
/* Flags for ec_response_get_protocol_info.flags */ /* Flags for ec_response_get_protocol_info.flags */
/* EC_RES_IN_PROGRESS may be returned if a command is slow */ /* EC_RES_IN_PROGRESS may be returned if a command is slow */
...@@ -805,11 +808,11 @@ struct ec_response_get_set_value { ...@@ -805,11 +808,11 @@ struct ec_response_get_set_value {
} __ec_align4; } __ec_align4;
/* More than one command can use these structs to get/set parameters. */ /* More than one command can use these structs to get/set parameters. */
#define EC_CMD_GSV_PAUSE_IN_S5 0x0c #define EC_CMD_GSV_PAUSE_IN_S5 0x000C
/*****************************************************************************/ /*****************************************************************************/
/* List the features supported by the firmware */ /* List the features supported by the firmware */
#define EC_CMD_GET_FEATURES 0x0d #define EC_CMD_GET_FEATURES 0x000D
/* Supported features */ /* Supported features */
enum ec_feature_code { enum ec_feature_code {
...@@ -933,7 +936,7 @@ struct ec_response_get_features { ...@@ -933,7 +936,7 @@ struct ec_response_get_features {
/* Flash commands */ /* Flash commands */
/* Get flash info */ /* Get flash info */
#define EC_CMD_FLASH_INFO 0x10 #define EC_CMD_FLASH_INFO 0x0010
/** /**
* struct ec_response_flash_info - Response to the flash info command. * struct ec_response_flash_info - Response to the flash info command.
...@@ -1000,7 +1003,7 @@ struct ec_response_flash_info_1 { ...@@ -1000,7 +1003,7 @@ struct ec_response_flash_info_1 {
* *
* Response is params.size bytes of data. * Response is params.size bytes of data.
*/ */
#define EC_CMD_FLASH_READ 0x11 #define EC_CMD_FLASH_READ 0x0011
/** /**
* struct ec_params_flash_read - Parameters for the flash read command. * struct ec_params_flash_read - Parameters for the flash read command.
...@@ -1013,7 +1016,7 @@ struct ec_params_flash_read { ...@@ -1013,7 +1016,7 @@ struct ec_params_flash_read {
} __ec_align4; } __ec_align4;
/* Write flash */ /* Write flash */
#define EC_CMD_FLASH_WRITE 0x12 #define EC_CMD_FLASH_WRITE 0x0012
#define EC_VER_FLASH_WRITE 1 #define EC_VER_FLASH_WRITE 1
/* Version 0 of the flash command supported only 64 bytes of data */ /* Version 0 of the flash command supported only 64 bytes of data */
...@@ -1031,7 +1034,7 @@ struct ec_params_flash_write { ...@@ -1031,7 +1034,7 @@ struct ec_params_flash_write {
} __ec_align4; } __ec_align4;
/* Erase flash */ /* Erase flash */
#define EC_CMD_FLASH_ERASE 0x13 #define EC_CMD_FLASH_ERASE 0x0013
/** /**
* struct ec_params_flash_erase - Parameters for the flash erase command. * struct ec_params_flash_erase - Parameters for the flash erase command.
...@@ -1053,7 +1056,7 @@ struct ec_params_flash_erase { ...@@ -1053,7 +1056,7 @@ struct ec_params_flash_erase {
* *
* If mask=0, simply returns the current flags state. * If mask=0, simply returns the current flags state.
*/ */
#define EC_CMD_FLASH_PROTECT 0x15 #define EC_CMD_FLASH_PROTECT 0x0015
#define EC_VER_FLASH_PROTECT 1 /* Command version 1 */ #define EC_VER_FLASH_PROTECT 1 /* Command version 1 */
/* Flags for flash protection */ /* Flags for flash protection */
...@@ -1110,7 +1113,7 @@ struct ec_response_flash_protect { ...@@ -1110,7 +1113,7 @@ struct ec_response_flash_protect {
*/ */
/* Get the region offset/size */ /* Get the region offset/size */
#define EC_CMD_FLASH_REGION_INFO 0x16 #define EC_CMD_FLASH_REGION_INFO 0x0016
#define EC_VER_FLASH_REGION_INFO 1 #define EC_VER_FLASH_REGION_INFO 1
enum ec_flash_region { enum ec_flash_region {
...@@ -1142,7 +1145,7 @@ struct ec_response_flash_region_info { ...@@ -1142,7 +1145,7 @@ struct ec_response_flash_region_info {
} __ec_align4; } __ec_align4;
/* Read/write VbNvContext */ /* Read/write VbNvContext */
#define EC_CMD_VBNV_CONTEXT 0x17 #define EC_CMD_VBNV_CONTEXT 0x0017
#define EC_VER_VBNV_CONTEXT 1 #define EC_VER_VBNV_CONTEXT 1
#define EC_VBNV_BLOCK_SIZE 16 #define EC_VBNV_BLOCK_SIZE 16
...@@ -1164,7 +1167,7 @@ struct ec_response_vbnvcontext { ...@@ -1164,7 +1167,7 @@ struct ec_response_vbnvcontext {
/* PWM commands */ /* PWM commands */
/* Get fan target RPM */ /* Get fan target RPM */
#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20 #define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x0020
struct ec_response_pwm_get_fan_rpm { struct ec_response_pwm_get_fan_rpm {
uint32_t rpm; uint32_t rpm;
...@@ -1178,7 +1181,7 @@ struct ec_params_pwm_set_fan_target_rpm { ...@@ -1178,7 +1181,7 @@ struct ec_params_pwm_set_fan_target_rpm {
} __ec_align_size1; } __ec_align_size1;
/* Get keyboard backlight */ /* Get keyboard backlight */
#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22 #define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x0022
struct ec_response_pwm_get_keyboard_backlight { struct ec_response_pwm_get_keyboard_backlight {
uint8_t percent; uint8_t percent;
...@@ -1186,20 +1189,20 @@ struct ec_response_pwm_get_keyboard_backlight { ...@@ -1186,20 +1189,20 @@ struct ec_response_pwm_get_keyboard_backlight {
} __ec_align1; } __ec_align1;
/* Set keyboard backlight */ /* Set keyboard backlight */
#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23 #define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x0023
struct ec_params_pwm_set_keyboard_backlight { struct ec_params_pwm_set_keyboard_backlight {
uint8_t percent; uint8_t percent;
} __ec_align1; } __ec_align1;
/* Set target fan PWM duty cycle */ /* Set target fan PWM duty cycle */
#define EC_CMD_PWM_SET_FAN_DUTY 0x24 #define EC_CMD_PWM_SET_FAN_DUTY 0x0024
struct ec_params_pwm_set_fan_duty { struct ec_params_pwm_set_fan_duty {
uint32_t percent; uint32_t percent;
} __ec_align4; } __ec_align4;
#define EC_CMD_PWM_SET_DUTY 0x25 #define EC_CMD_PWM_SET_DUTY 0x0025
/* 16 bit duty cycle, 0xffff = 100% */ /* 16 bit duty cycle, 0xffff = 100% */
#define EC_PWM_MAX_DUTY 0xffff #define EC_PWM_MAX_DUTY 0xffff
...@@ -1219,7 +1222,7 @@ struct ec_params_pwm_set_duty { ...@@ -1219,7 +1222,7 @@ struct ec_params_pwm_set_duty {
uint8_t index; /* Type-specific index, or 0 if unique */ uint8_t index; /* Type-specific index, or 0 if unique */
} __ec_align4; } __ec_align4;
#define EC_CMD_PWM_GET_DUTY 0x26 #define EC_CMD_PWM_GET_DUTY 0x0026
struct ec_params_pwm_get_duty { struct ec_params_pwm_get_duty {
uint8_t pwm_type; /* ec_pwm_type */ uint8_t pwm_type; /* ec_pwm_type */
...@@ -1237,7 +1240,7 @@ struct ec_response_pwm_get_duty { ...@@ -1237,7 +1240,7 @@ struct ec_response_pwm_get_duty {
* into a subcommand. We'll make separate structs for subcommands with * into a subcommand. We'll make separate structs for subcommands with
* different input args, so that we know how much to expect. * different input args, so that we know how much to expect.
*/ */
#define EC_CMD_LIGHTBAR_CMD 0x28 #define EC_CMD_LIGHTBAR_CMD 0x0028
struct rgb_s { struct rgb_s {
uint8_t r, g, b; uint8_t r, g, b;
...@@ -1431,7 +1434,7 @@ enum lightbar_command { ...@@ -1431,7 +1434,7 @@ enum lightbar_command {
/*****************************************************************************/ /*****************************************************************************/
/* LED control commands */ /* LED control commands */
#define EC_CMD_LED_CONTROL 0x29 #define EC_CMD_LED_CONTROL 0x0029
enum ec_led_id { enum ec_led_id {
/* LED to indicate battery state of charge */ /* LED to indicate battery state of charge */
...@@ -1488,7 +1491,7 @@ struct ec_response_led_control { ...@@ -1488,7 +1491,7 @@ struct ec_response_led_control {
*/ */
/* Verified boot hash command */ /* Verified boot hash command */
#define EC_CMD_VBOOT_HASH 0x2A #define EC_CMD_VBOOT_HASH 0x002A
struct ec_params_vboot_hash { struct ec_params_vboot_hash {
uint8_t cmd; /* enum ec_vboot_hash_cmd */ uint8_t cmd; /* enum ec_vboot_hash_cmd */
...@@ -1540,7 +1543,7 @@ enum ec_vboot_hash_status { ...@@ -1540,7 +1543,7 @@ enum ec_vboot_hash_status {
* Motion sense commands. We'll make separate structs for sub-commands with * Motion sense commands. We'll make separate structs for sub-commands with
* different input args, so that we know how much to expect. * different input args, so that we know how much to expect.
*/ */
#define EC_CMD_MOTION_SENSE_CMD 0x2B #define EC_CMD_MOTION_SENSE_CMD 0x002B
/* Motion sense commands */ /* Motion sense commands */
enum motionsense_command { enum motionsense_command {
...@@ -1804,7 +1807,7 @@ struct ec_response_motion_sense { ...@@ -1804,7 +1807,7 @@ struct ec_response_motion_sense {
/* USB charging control commands */ /* USB charging control commands */
/* Set USB port charging mode */ /* Set USB port charging mode */
#define EC_CMD_USB_CHARGE_SET_MODE 0x30 #define EC_CMD_USB_CHARGE_SET_MODE 0x0030
struct ec_params_usb_charge_set_mode { struct ec_params_usb_charge_set_mode {
uint8_t usb_port_id; uint8_t usb_port_id;
...@@ -1818,7 +1821,7 @@ struct ec_params_usb_charge_set_mode { ...@@ -1818,7 +1821,7 @@ struct ec_params_usb_charge_set_mode {
#define EC_PSTORE_SIZE_MAX 64 #define EC_PSTORE_SIZE_MAX 64
/* Get persistent storage info */ /* Get persistent storage info */
#define EC_CMD_PSTORE_INFO 0x40 #define EC_CMD_PSTORE_INFO 0x0040
struct ec_response_pstore_info { struct ec_response_pstore_info {
/* Persistent storage size, in bytes */ /* Persistent storage size, in bytes */
...@@ -1832,7 +1835,7 @@ struct ec_response_pstore_info { ...@@ -1832,7 +1835,7 @@ struct ec_response_pstore_info {
* *
* Response is params.size bytes of data. * Response is params.size bytes of data.
*/ */
#define EC_CMD_PSTORE_READ 0x41 #define EC_CMD_PSTORE_READ 0x0041
struct ec_params_pstore_read { struct ec_params_pstore_read {
uint32_t offset; /* Byte offset to read */ uint32_t offset; /* Byte offset to read */
...@@ -1840,7 +1843,7 @@ struct ec_params_pstore_read { ...@@ -1840,7 +1843,7 @@ struct ec_params_pstore_read {
} __ec_align4; } __ec_align4;
/* Write persistent storage */ /* Write persistent storage */
#define EC_CMD_PSTORE_WRITE 0x42 #define EC_CMD_PSTORE_WRITE 0x0042
struct ec_params_pstore_write { struct ec_params_pstore_write {
uint32_t offset; /* Byte offset to write */ uint32_t offset; /* Byte offset to write */
...@@ -1861,12 +1864,12 @@ struct ec_response_rtc { ...@@ -1861,12 +1864,12 @@ struct ec_response_rtc {
} __ec_align4; } __ec_align4;
/* These use ec_response_rtc */ /* These use ec_response_rtc */
#define EC_CMD_RTC_GET_VALUE 0x44 #define EC_CMD_RTC_GET_VALUE 0x0044
#define EC_CMD_RTC_GET_ALARM 0x45 #define EC_CMD_RTC_GET_ALARM 0x0045
/* These all use ec_params_rtc */ /* These all use ec_params_rtc */
#define EC_CMD_RTC_SET_VALUE 0x46 #define EC_CMD_RTC_SET_VALUE 0x0046
#define EC_CMD_RTC_SET_ALARM 0x47 #define EC_CMD_RTC_SET_ALARM 0x0047
/* Pass as time param to SET_ALARM to clear the current alarm */ /* Pass as time param to SET_ALARM to clear the current alarm */
#define EC_RTC_ALARM_CLEAR 0 #define EC_RTC_ALARM_CLEAR 0
...@@ -1878,8 +1881,8 @@ struct ec_response_rtc { ...@@ -1878,8 +1881,8 @@ struct ec_response_rtc {
#define EC_PORT80_SIZE_MAX 32 #define EC_PORT80_SIZE_MAX 32
/* Get last port80 code from previous boot */ /* Get last port80 code from previous boot */
#define EC_CMD_PORT80_LAST_BOOT 0x48 #define EC_CMD_PORT80_LAST_BOOT 0x0048
#define EC_CMD_PORT80_READ 0x48 #define EC_CMD_PORT80_READ 0x0048
enum ec_port80_subcmd { enum ec_port80_subcmd {
EC_PORT80_GET_INFO = 0, EC_PORT80_GET_INFO = 0,
...@@ -1920,8 +1923,8 @@ struct ec_response_port80_last_boot { ...@@ -1920,8 +1923,8 @@ struct ec_response_port80_last_boot {
* Version 1 separates the CPU thermal limits from the fan control. * Version 1 separates the CPU thermal limits from the fan control.
*/ */
#define EC_CMD_THERMAL_SET_THRESHOLD 0x50 #define EC_CMD_THERMAL_SET_THRESHOLD 0x0050
#define EC_CMD_THERMAL_GET_THRESHOLD 0x51 #define EC_CMD_THERMAL_GET_THRESHOLD 0x0051
/* The version 0 structs are opaque. You have to know what they are for /* The version 0 structs are opaque. You have to know what they are for
* the get/set commands to make any sense. * the get/set commands to make any sense.
...@@ -1983,10 +1986,10 @@ struct ec_params_thermal_set_threshold_v1 { ...@@ -1983,10 +1986,10 @@ struct ec_params_thermal_set_threshold_v1 {
/****************************************************************************/ /****************************************************************************/
/* Toggle automatic fan control */ /* Toggle automatic fan control */
#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52 #define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052
/* Get TMP006 calibration data */ /* Get TMP006 calibration data */
#define EC_CMD_TMP006_GET_CALIBRATION 0x53 #define EC_CMD_TMP006_GET_CALIBRATION 0x0053
struct ec_params_tmp006_get_calibration { struct ec_params_tmp006_get_calibration {
uint8_t index; uint8_t index;
...@@ -2000,7 +2003,7 @@ struct ec_response_tmp006_get_calibration { ...@@ -2000,7 +2003,7 @@ struct ec_response_tmp006_get_calibration {
} __ec_align4; } __ec_align4;
/* Set TMP006 calibration data */ /* Set TMP006 calibration data */
#define EC_CMD_TMP006_SET_CALIBRATION 0x54 #define EC_CMD_TMP006_SET_CALIBRATION 0x0054
struct ec_params_tmp006_set_calibration { struct ec_params_tmp006_set_calibration {
uint8_t index; uint8_t index;
...@@ -2012,7 +2015,7 @@ struct ec_params_tmp006_set_calibration { ...@@ -2012,7 +2015,7 @@ struct ec_params_tmp006_set_calibration {
} __ec_align4; } __ec_align4;
/* Read raw TMP006 data */ /* Read raw TMP006 data */
#define EC_CMD_TMP006_GET_RAW 0x55 #define EC_CMD_TMP006_GET_RAW 0x0055
struct ec_params_tmp006_get_raw { struct ec_params_tmp006_get_raw {
uint8_t index; uint8_t index;
...@@ -2036,12 +2039,12 @@ struct ec_response_tmp006_get_raw { ...@@ -2036,12 +2039,12 @@ struct ec_response_tmp006_get_raw {
* to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type * to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type
* EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX. * EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX.
*/ */
#define EC_CMD_MKBP_STATE 0x60 #define EC_CMD_MKBP_STATE 0x0060
/* /*
* Provide information about various MKBP things. See enum ec_mkbp_info_type. * Provide information about various MKBP things. See enum ec_mkbp_info_type.
*/ */
#define EC_CMD_MKBP_INFO 0x61 #define EC_CMD_MKBP_INFO 0x0061
struct ec_response_mkbp_info { struct ec_response_mkbp_info {
uint32_t rows; uint32_t rows;
...@@ -2095,7 +2098,7 @@ enum ec_mkbp_info_type { ...@@ -2095,7 +2098,7 @@ enum ec_mkbp_info_type {
}; };
/* Simulate key press */ /* Simulate key press */
#define EC_CMD_MKBP_SIMULATE_KEY 0x62 #define EC_CMD_MKBP_SIMULATE_KEY 0x0062
struct ec_params_mkbp_simulate_key { struct ec_params_mkbp_simulate_key {
uint8_t col; uint8_t col;
...@@ -2104,8 +2107,8 @@ struct ec_params_mkbp_simulate_key { ...@@ -2104,8 +2107,8 @@ struct ec_params_mkbp_simulate_key {
} __ec_align1; } __ec_align1;
/* Configure keyboard scanning */ /* Configure keyboard scanning */
#define EC_CMD_MKBP_SET_CONFIG 0x64 #define EC_CMD_MKBP_SET_CONFIG 0x0064
#define EC_CMD_MKBP_GET_CONFIG 0x65 #define EC_CMD_MKBP_GET_CONFIG 0x0065
/* flags */ /* flags */
enum mkbp_config_flags { enum mkbp_config_flags {
...@@ -2158,7 +2161,7 @@ struct ec_response_mkbp_get_config { ...@@ -2158,7 +2161,7 @@ struct ec_response_mkbp_get_config {
} __ec_align_size1; } __ec_align_size1;
/* Run the key scan emulation */ /* Run the key scan emulation */
#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66 #define EC_CMD_KEYSCAN_SEQ_CTRL 0x0066
enum ec_keyscan_seq_cmd { enum ec_keyscan_seq_cmd {
EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */ EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */
...@@ -2219,7 +2222,7 @@ struct ec_result_keyscan_seq_ctrl { ...@@ -2219,7 +2222,7 @@ struct ec_result_keyscan_seq_ctrl {
* *
* The device replies with UNAVAILABLE if there aren't any pending events. * The device replies with UNAVAILABLE if there aren't any pending events.
*/ */
#define EC_CMD_GET_NEXT_EVENT 0x67 #define EC_CMD_GET_NEXT_EVENT 0x0067
enum ec_mkbp_event { enum ec_mkbp_event {
/* Keyboard matrix changed. The event data is the new matrix state. */ /* Keyboard matrix changed. The event data is the new matrix state. */
...@@ -2298,7 +2301,7 @@ struct ec_response_get_next_event_v1 { ...@@ -2298,7 +2301,7 @@ struct ec_response_get_next_event_v1 {
/* Temperature sensor commands */ /* Temperature sensor commands */
/* Read temperature sensor info */ /* Read temperature sensor info */
#define EC_CMD_TEMP_SENSOR_GET_INFO 0x70 #define EC_CMD_TEMP_SENSOR_GET_INFO 0x0070
struct ec_params_temp_sensor_get_info { struct ec_params_temp_sensor_get_info {
uint8_t id; uint8_t id;
...@@ -2333,30 +2336,30 @@ struct ec_response_host_event_mask { ...@@ -2333,30 +2336,30 @@ struct ec_response_host_event_mask {
} __ec_align4; } __ec_align4;
/* These all use ec_response_host_event_mask */ /* These all use ec_response_host_event_mask */
#define EC_CMD_HOST_EVENT_GET_B 0x87 #define EC_CMD_HOST_EVENT_GET_B 0x0087
#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x88 #define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x0088
#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x89 #define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x0089
#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d #define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x008D
/* These all use ec_params_host_event_mask */ /* These all use ec_params_host_event_mask */
#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x8a #define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x008A
#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x8b #define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x008B
#define EC_CMD_HOST_EVENT_CLEAR 0x8c #define EC_CMD_HOST_EVENT_CLEAR 0x008C
#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e #define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x008E
#define EC_CMD_HOST_EVENT_CLEAR_B 0x8f #define EC_CMD_HOST_EVENT_CLEAR_B 0x008F
/*****************************************************************************/ /*****************************************************************************/
/* Switch commands */ /* Switch commands */
/* Enable/disable LCD backlight */ /* Enable/disable LCD backlight */
#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90 #define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x0090
struct ec_params_switch_enable_backlight { struct ec_params_switch_enable_backlight {
uint8_t enabled; uint8_t enabled;
} __ec_align1; } __ec_align1;
/* Enable/disable WLAN/Bluetooth */ /* Enable/disable WLAN/Bluetooth */
#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91 #define EC_CMD_SWITCH_ENABLE_WIRELESS 0x0091
#define EC_VER_SWITCH_ENABLE_WIRELESS 1 #define EC_VER_SWITCH_ENABLE_WIRELESS 1
/* Version 0 params; no response */ /* Version 0 params; no response */
...@@ -2396,7 +2399,7 @@ struct ec_response_switch_enable_wireless_v1 { ...@@ -2396,7 +2399,7 @@ struct ec_response_switch_enable_wireless_v1 {
/* GPIO commands. Only available on EC if write protect has been disabled. */ /* GPIO commands. Only available on EC if write protect has been disabled. */
/* Set GPIO output value */ /* Set GPIO output value */
#define EC_CMD_GPIO_SET 0x92 #define EC_CMD_GPIO_SET 0x0092
struct ec_params_gpio_set { struct ec_params_gpio_set {
char name[32]; char name[32];
...@@ -2404,7 +2407,7 @@ struct ec_params_gpio_set { ...@@ -2404,7 +2407,7 @@ struct ec_params_gpio_set {
} __ec_align1; } __ec_align1;
/* Get GPIO value */ /* Get GPIO value */
#define EC_CMD_GPIO_GET 0x93 #define EC_CMD_GPIO_GET 0x0093
/* Version 0 of input params and response */ /* Version 0 of input params and response */
struct ec_params_gpio_get { struct ec_params_gpio_get {
...@@ -2458,7 +2461,7 @@ enum gpio_get_subcmd { ...@@ -2458,7 +2461,7 @@ enum gpio_get_subcmd {
*/ */
/* Read I2C bus */ /* Read I2C bus */
#define EC_CMD_I2C_READ 0x94 #define EC_CMD_I2C_READ 0x0094
struct ec_params_i2c_read { struct ec_params_i2c_read {
uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
...@@ -2472,7 +2475,7 @@ struct ec_response_i2c_read { ...@@ -2472,7 +2475,7 @@ struct ec_response_i2c_read {
} __ec_align2; } __ec_align2;
/* Write I2C bus */ /* Write I2C bus */
#define EC_CMD_I2C_WRITE 0x95 #define EC_CMD_I2C_WRITE 0x0095
struct ec_params_i2c_write { struct ec_params_i2c_write {
uint16_t data; uint16_t data;
...@@ -2488,7 +2491,7 @@ struct ec_params_i2c_write { ...@@ -2488,7 +2491,7 @@ struct ec_params_i2c_write {
/* Force charge state machine to stop charging the battery or force it to /* Force charge state machine to stop charging the battery or force it to
* discharge the battery. * discharge the battery.
*/ */
#define EC_CMD_CHARGE_CONTROL 0x96 #define EC_CMD_CHARGE_CONTROL 0x0096
#define EC_VER_CHARGE_CONTROL 1 #define EC_VER_CHARGE_CONTROL 1
enum ec_charge_control_mode { enum ec_charge_control_mode {
...@@ -2504,7 +2507,7 @@ struct ec_params_charge_control { ...@@ -2504,7 +2507,7 @@ struct ec_params_charge_control {
/*****************************************************************************/ /*****************************************************************************/
/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */ /* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */
#define EC_CMD_CONSOLE_SNAPSHOT 0x97 #define EC_CMD_CONSOLE_SNAPSHOT 0x0097
/* /*
* Read data from the saved snapshot. If the subcmd parameter is * Read data from the saved snapshot. If the subcmd parameter is
...@@ -2518,7 +2521,7 @@ struct ec_params_charge_control { ...@@ -2518,7 +2521,7 @@ struct ec_params_charge_control {
* Response is null-terminated string. Empty string, if there is no more * Response is null-terminated string. Empty string, if there is no more
* remaining output. * remaining output.
*/ */
#define EC_CMD_CONSOLE_READ 0x98 #define EC_CMD_CONSOLE_READ 0x0098
enum ec_console_read_subcmd { enum ec_console_read_subcmd {
CONSOLE_READ_NEXT = 0, CONSOLE_READ_NEXT = 0,
...@@ -2538,8 +2541,7 @@ struct ec_params_console_read_v1 { ...@@ -2538,8 +2541,7 @@ struct ec_params_console_read_v1 {
* EC_RES_SUCCESS if the command was successful. * EC_RES_SUCCESS if the command was successful.
* EC_RES_ERROR if the cut off command failed. * EC_RES_ERROR if the cut off command failed.
*/ */
#define EC_CMD_BATTERY_CUT_OFF 0x0099
#define EC_CMD_BATTERY_CUT_OFF 0x99
#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0) #define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0)
...@@ -2553,7 +2555,7 @@ struct ec_params_battery_cutoff { ...@@ -2553,7 +2555,7 @@ struct ec_params_battery_cutoff {
/* /*
* Switch USB mux or return to automatic switching. * Switch USB mux or return to automatic switching.
*/ */
#define EC_CMD_USB_MUX 0x9a #define EC_CMD_USB_MUX 0x009A
struct ec_params_usb_mux { struct ec_params_usb_mux {
uint8_t mux; uint8_t mux;
...@@ -2570,7 +2572,7 @@ enum ec_ldo_state { ...@@ -2570,7 +2572,7 @@ enum ec_ldo_state {
/* /*
* Switch on/off a LDO. * Switch on/off a LDO.
*/ */
#define EC_CMD_LDO_SET 0x9b #define EC_CMD_LDO_SET 0x009B
struct ec_params_ldo_set { struct ec_params_ldo_set {
uint8_t index; uint8_t index;
...@@ -2580,7 +2582,7 @@ struct ec_params_ldo_set { ...@@ -2580,7 +2582,7 @@ struct ec_params_ldo_set {
/* /*
* Get LDO state. * Get LDO state.
*/ */
#define EC_CMD_LDO_GET 0x9c #define EC_CMD_LDO_GET 0x009C
struct ec_params_ldo_get { struct ec_params_ldo_get {
uint8_t index; uint8_t index;
...@@ -2596,7 +2598,7 @@ struct ec_response_ldo_get { ...@@ -2596,7 +2598,7 @@ struct ec_response_ldo_get {
/* /*
* Get power info. * Get power info.
*/ */
#define EC_CMD_POWER_INFO 0x9d #define EC_CMD_POWER_INFO 0x009D
struct ec_response_power_info { struct ec_response_power_info {
uint32_t usb_dev_type; uint32_t usb_dev_type;
...@@ -2609,7 +2611,7 @@ struct ec_response_power_info { ...@@ -2609,7 +2611,7 @@ struct ec_response_power_info {
/*****************************************************************************/ /*****************************************************************************/
/* I2C passthru command */ /* I2C passthru command */
#define EC_CMD_I2C_PASSTHRU 0x9e #define EC_CMD_I2C_PASSTHRU 0x009E
/* Read data; if not present, message is a write */ /* Read data; if not present, message is a write */
#define EC_I2C_FLAG_READ (1 << 15) #define EC_I2C_FLAG_READ (1 << 15)
...@@ -2644,7 +2646,7 @@ struct ec_response_i2c_passthru { ...@@ -2644,7 +2646,7 @@ struct ec_response_i2c_passthru {
/*****************************************************************************/ /*****************************************************************************/
/* Power button hang detect */ /* Power button hang detect */
#define EC_CMD_HANG_DETECT 0x9f #define EC_CMD_HANG_DETECT 0x009F
/* Reasons to start hang detection timer */ /* Reasons to start hang detection timer */
/* Power button pressed */ /* Power button pressed */
...@@ -2703,7 +2705,7 @@ struct ec_params_hang_detect { ...@@ -2703,7 +2705,7 @@ struct ec_params_hang_detect {
* This is the single catch-all host command to exchange data regarding the * This is the single catch-all host command to exchange data regarding the
* charge state machine (v2 and up). * charge state machine (v2 and up).
*/ */
#define EC_CMD_CHARGE_STATE 0xa0 #define EC_CMD_CHARGE_STATE 0x00A0
/* Subcommands for this host command */ /* Subcommands for this host command */
enum charge_state_command { enum charge_state_command {
...@@ -2774,7 +2776,7 @@ struct ec_response_charge_state { ...@@ -2774,7 +2776,7 @@ struct ec_response_charge_state {
/* /*
* Set maximum battery charging current. * Set maximum battery charging current.
*/ */
#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1 #define EC_CMD_CHARGE_CURRENT_LIMIT 0x00A1
struct ec_params_current_limit { struct ec_params_current_limit {
uint32_t limit; /* in mA */ uint32_t limit; /* in mA */
...@@ -2794,7 +2796,7 @@ struct ec_params_external_power_limit_v1 { ...@@ -2794,7 +2796,7 @@ struct ec_params_external_power_limit_v1 {
#define EC_POWER_LIMIT_NONE 0xffff #define EC_POWER_LIMIT_NONE 0xffff
/* Inform the EC when entering a sleep state */ /* Inform the EC when entering a sleep state */
#define EC_CMD_HOST_SLEEP_EVENT 0xa9 #define EC_CMD_HOST_SLEEP_EVENT 0x00A9
enum host_sleep_event { enum host_sleep_event {
HOST_SLEEP_EVENT_S3_SUSPEND = 1, HOST_SLEEP_EVENT_S3_SUSPEND = 1,
...@@ -2868,14 +2870,14 @@ struct ec_response_host_sleep_event_v1 { ...@@ -2868,14 +2870,14 @@ struct ec_response_host_sleep_event_v1 {
/* Smart battery pass-through */ /* Smart battery pass-through */
/* Get / Set 16-bit smart battery registers */ /* Get / Set 16-bit smart battery registers */
#define EC_CMD_SB_READ_WORD 0xb0 #define EC_CMD_SB_READ_WORD 0x00B0
#define EC_CMD_SB_WRITE_WORD 0xb1 #define EC_CMD_SB_WRITE_WORD 0x00B1
/* Get / Set string smart battery parameters /* Get / Set string smart battery parameters
* formatted as SMBUS "block". * formatted as SMBUS "block".
*/ */
#define EC_CMD_SB_READ_BLOCK 0xb2 #define EC_CMD_SB_READ_BLOCK 0x00B2
#define EC_CMD_SB_WRITE_BLOCK 0xb3 #define EC_CMD_SB_WRITE_BLOCK 0x00B3
struct ec_params_sb_rd { struct ec_params_sb_rd {
uint8_t reg; uint8_t reg;
...@@ -2908,7 +2910,7 @@ struct ec_params_sb_wr_block { ...@@ -2908,7 +2910,7 @@ struct ec_params_sb_wr_block {
* requested value. * requested value.
*/ */
#define EC_CMD_BATTERY_VENDOR_PARAM 0xb4 #define EC_CMD_BATTERY_VENDOR_PARAM 0x00B4
enum ec_battery_vendor_param_mode { enum ec_battery_vendor_param_mode {
BATTERY_VENDOR_PARAM_MODE_GET = 0, BATTERY_VENDOR_PARAM_MODE_GET = 0,
...@@ -3024,7 +3026,7 @@ struct ec_response_codec_gain { ...@@ -3024,7 +3026,7 @@ struct ec_response_codec_gain {
* TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't
* necessarily reboot the EC. Rename to "image" or something similar? * necessarily reboot the EC. Rename to "image" or something similar?
*/ */
#define EC_CMD_REBOOT_EC 0xd2 #define EC_CMD_REBOOT_EC 0x00D2
/* Command */ /* Command */
enum ec_reboot_cmd { enum ec_reboot_cmd {
...@@ -3052,7 +3054,7 @@ struct ec_params_reboot_ec { ...@@ -3052,7 +3054,7 @@ struct ec_params_reboot_ec {
* Returns variable-length platform-dependent panic information. See panic.h * Returns variable-length platform-dependent panic information. See panic.h
* for details. * for details.
*/ */
#define EC_CMD_GET_PANIC_INFO 0xd3 #define EC_CMD_GET_PANIC_INFO 0x00D3
/*****************************************************************************/ /*****************************************************************************/
/* /*
...@@ -3260,7 +3262,7 @@ enum mkbp_cec_event { ...@@ -3260,7 +3262,7 @@ enum mkbp_cec_event {
* *
* Use EC_CMD_REBOOT_EC to reboot the EC more politely. * Use EC_CMD_REBOOT_EC to reboot the EC more politely.
*/ */
#define EC_CMD_REBOOT 0xd1 /* Think "die" */ #define EC_CMD_REBOOT 0x00D1 /* Think "die" */
/* /*
* Resend last response (not supported on LPC). * Resend last response (not supported on LPC).
...@@ -3269,7 +3271,7 @@ enum mkbp_cec_event { ...@@ -3269,7 +3271,7 @@ enum mkbp_cec_event {
* there was no previous command, or the previous command's response was too * there was no previous command, or the previous command's response was too
* big to save. * big to save.
*/ */
#define EC_CMD_RESEND_RESPONSE 0xdb #define EC_CMD_RESEND_RESPONSE 0x00DB
/* /*
* This header byte on a command indicate version 0. Any header byte less * This header byte on a command indicate version 0. Any header byte less
...@@ -3281,7 +3283,7 @@ enum mkbp_cec_event { ...@@ -3281,7 +3283,7 @@ enum mkbp_cec_event {
* *
* The old EC interface must not use commands 0xdc or higher. * The old EC interface must not use commands 0xdc or higher.
*/ */
#define EC_CMD_VERSION0 0xdc #define EC_CMD_VERSION0 0x00DC
#endif /* !__ACPI__ */ #endif /* !__ACPI__ */
...@@ -3293,7 +3295,7 @@ enum mkbp_cec_event { ...@@ -3293,7 +3295,7 @@ enum mkbp_cec_event {
*/ */
/* EC to PD MCU exchange status command */ /* EC to PD MCU exchange status command */
#define EC_CMD_PD_EXCHANGE_STATUS 0x100 #define EC_CMD_PD_EXCHANGE_STATUS 0x0100
/* Status of EC being sent to PD */ /* Status of EC being sent to PD */
struct ec_params_pd_status { struct ec_params_pd_status {
...@@ -3307,7 +3309,7 @@ struct ec_response_pd_status { ...@@ -3307,7 +3309,7 @@ struct ec_response_pd_status {
} __ec_align_size1; } __ec_align_size1;
/* Set USB type-C port role and muxes */ /* Set USB type-C port role and muxes */
#define EC_CMD_USB_PD_CONTROL 0x101 #define EC_CMD_USB_PD_CONTROL 0x0101
enum usb_pd_control_role { enum usb_pd_control_role {
USB_PD_CTRL_ROLE_NO_CHANGE = 0, USB_PD_CTRL_ROLE_NO_CHANGE = 0,
...@@ -3360,7 +3362,7 @@ struct ec_response_usb_pd_control_v1 { ...@@ -3360,7 +3362,7 @@ struct ec_response_usb_pd_control_v1 {
char state[32]; char state[32];
} __ec_align1; } __ec_align1;
#define EC_CMD_USB_PD_PORTS 0x102 #define EC_CMD_USB_PD_PORTS 0x0102
/* Maximum number of PD ports on a device, num_ports will be <= this */ /* Maximum number of PD ports on a device, num_ports will be <= this */
#define EC_USB_PD_MAX_PORTS 8 #define EC_USB_PD_MAX_PORTS 8
...@@ -3369,7 +3371,7 @@ struct ec_response_usb_pd_ports { ...@@ -3369,7 +3371,7 @@ struct ec_response_usb_pd_ports {
uint8_t num_ports; uint8_t num_ports;
} __ec_align1; } __ec_align1;
#define EC_CMD_USB_PD_POWER_INFO 0x103 #define EC_CMD_USB_PD_POWER_INFO 0x0103
#define PD_POWER_CHARGING_PORT 0xff #define PD_POWER_CHARGING_PORT 0xff
struct ec_params_usb_pd_power_info { struct ec_params_usb_pd_power_info {
...@@ -3536,7 +3538,7 @@ struct mcdp_info { ...@@ -3536,7 +3538,7 @@ struct mcdp_info {
#define MCDP_FAMILY(family) ((family[0] << 8) | family[1]) #define MCDP_FAMILY(family) ((family[0] << 8) | family[1])
/* Get info about USB-C SS muxes */ /* Get info about USB-C SS muxes */
#define EC_CMD_USB_PD_MUX_INFO 0x11a #define EC_CMD_USB_PD_MUX_INFO 0x011A
struct ec_params_usb_pd_mux_info { struct ec_params_usb_pd_mux_info {
uint8_t port; /* USB-C port number */ uint8_t port; /* USB-C port number */
...@@ -3551,6 +3553,41 @@ struct ec_params_usb_pd_mux_info { ...@@ -3551,6 +3553,41 @@ struct ec_params_usb_pd_mux_info {
struct ec_response_usb_pd_mux_info { struct ec_response_usb_pd_mux_info {
uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */ uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
} __ec_align1; } __ec_align1;
/*****************************************************************************/
/*
* Reserve a range of host commands for board-specific, experimental, or
* special purpose features. These can be (re)used without updating this file.
*
* CAUTION: Don't go nuts with this. Shipping products should document ALL
* their EC commands for easier development, testing, debugging, and support.
*
* All commands MUST be #defined to be 4-digit UPPER CASE hex values
* (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work.
*
* In your experimental code, you may want to do something like this:
*
* #define EC_CMD_MAGIC_FOO 0x0000
* #define EC_CMD_MAGIC_BAR 0x0001
* #define EC_CMD_MAGIC_HEY 0x0002
*
* DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_FOO, magic_foo_handler,
* EC_VER_MASK(0);
*
* DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_BAR, magic_bar_handler,
* EC_VER_MASK(0);
*
* DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_HEY, magic_hey_handler,
* EC_VER_MASK(0);
*/
#define EC_CMD_BOARD_SPECIFIC_BASE 0x3E00
#define EC_CMD_BOARD_SPECIFIC_LAST 0x3FFF
/*
* Given the private host command offset, calculate the true private host
* command value.
*/
#define EC_PRIVATE_HOST_COMMAND_VALUE(command) \
(EC_CMD_BOARD_SPECIFIC_BASE + (command))
/*****************************************************************************/ /*****************************************************************************/
/* /*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7