Skip to content

L
linux
Commit ff92b9dd authored by Suganath Prabu's avatar Suganath Prabu Committed by Martin K. Petersen
Browse files
Options

scsi: mpt3sas: Update MPI headers to support Aero controllers 

Updating MPI headers to the latest version 2.6.7 to add support to the
driver to detect the new 3816 and 3916 chip based controllers.  Separate
out firmware image data from mpi2_ioc.h to new file mpi2_image.h
Signed-off-by: default avatarSuganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 65102238
Expand all Show whitespace changes
Inline Side-by-side
Showing with 678 additions and 388 deletions
drivers/scsi/mpt3sas/mpi/mpi2.h
View file @ ff92b9dd
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright 2000-2015 Avago Technologies. All rights reserved.
* Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2.h
......@@ -9,7 +9,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
* mpi2.h Version: 02.00.50
* mpi2.h Version: 02.00.53
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
......@@ -116,6 +116,11 @@
* 02-03-17 02.00.48 Bumped MPI2_HEADER_VERSION_UNIT.
* 06-13-17 02.00.49 Bumped MPI2_HEADER_VERSION_UNIT.
* 09-29-17 02.00.50 Bumped MPI2_HEADER_VERSION_UNIT.
* 07-22-18 02.00.51 Added SECURE_BOOT define.
* Bumped MPI2_HEADER_VERSION_UNIT
* 08-15-18 02.00.52 Bumped MPI2_HEADER_VERSION_UNIT.
* 08-28-18 02.00.53 Bumped MPI2_HEADER_VERSION_UNIT.
* Added MPI2_IOCSTATUS_FAILURE
* --------------------------------------------------------------------------
*/
......@@ -156,7 +161,7 @@
/* Unit and Dev versioning for this MPI header set */
#define MPI2_HEADER_VERSION_UNIT (0x32)
#define MPI2_HEADER_VERSION_UNIT (0x35)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
......@@ -257,6 +262,8 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS {
*/
#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008)
#define MPI26_DIAG_SECURE_BOOT (0x80000000)
#define MPI2_DIAG_SBR_RELOAD (0x00002000)
#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800)
......@@ -687,7 +694,9 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007)
#define MPI2_IOCSTATUS_INVALID_STATE (0x0008)
#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009)
/*MPI v2.6 and later */
#define MPI2_IOCSTATUS_INSUFFICIENT_POWER (0x000A)
#define MPI2_IOCSTATUS_FAILURE (0x000F)
/****************************************************************************
* Config IOCStatus values
......
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
View file @ ff92b9dd
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright 2000-2015 Avago Technologies. All rights reserved.
* Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2_cnfg.h
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
* mpi2_cnfg.h Version: 02.00.42
* mpi2_cnfg.h Version: 02.00.46
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
......@@ -231,6 +231,18 @@
* Added NOIOB field to PCIe Device Page 2.
* Added MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN to
* the Capabilities field of PCIe Device Page 2.
* 07-22-18 02.00.43 Added defines for SAS3916 and SAS3816.
* Added WRiteCache defines to IO Unit Page 1.
* Added MaxEnclosureLevel to BIOS Page 1.
* Added OEMRD to SAS Enclosure Page 1.
* Added DMDReportPCIe to PCIe IO Unit Page 1.
* Added Flags field and flags for Retimers to
* PCIe Switch Page 1.
* 08-02-18 02.00.44 Added Slotx2, Slotx4 to ManPage 7.
* 08-15-18 02.00.45 Added ProductSpecific field at end of IOC Page 1
* 08-28-18 02.00.46 Added NVMs Write Cache flag to IOUnitPage1
* Added DMDReport Delay Time defines to
* PCIeIOUnitPage1
* --------------------------------------------------------------------------
*/
......@@ -568,8 +580,17 @@ typedef struct _MPI2_CONFIG_REPLY {
#define MPI26_MFGPAGE_DEVID_SAS3616 (0x00D1)
#define MPI26_MFGPAGE_DEVID_SAS3708 (0x00D2)
#define MPI26_MFGPAGE_DEVID_SAS3816 (0x00A1)
#define MPI26_MFGPAGE_DEVID_SAS3916 (0x00A0)
#define MPI26_MFGPAGE_DEVID_SEC_MASK_3916 (0x0003)
#define MPI26_MFGPAGE_DEVID_INVALID0_3916 (0x00E0)
#define MPI26_MFGPAGE_DEVID_CFG_SEC_3916 (0x00E1)
#define MPI26_MFGPAGE_DEVID_HARD_SEC_3916 (0x00E2)
#define MPI26_MFGPAGE_DEVID_INVALID1_3916 (0x00E3)
#define MPI26_MFGPAGE_DEVID_SEC_MASK_3816 (0x0003)
#define MPI26_MFGPAGE_DEVID_INVALID0_3816 (0x00E4)
#define MPI26_MFGPAGE_DEVID_CFG_SEC_3816 (0x00E5)
#define MPI26_MFGPAGE_DEVID_HARD_SEC_3816 (0x00E6)
#define MPI26_MFGPAGE_DEVID_INVALID1_3816 (0x00E7)
/*Manufacturing Page 0 */
......@@ -932,7 +953,11 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 {
#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04)
/*IO Unit Page 1 Flags defines */
/* IO Unit Page 1 Flags defines */
#define MPI26_IOUNITPAGE1_NVME_WRCACHE_MASK (0x00030000)
#define MPI26_IOUNITPAGE1_NVME_WRCACHE_ENABLE (0x00000000)
#define MPI26_IOUNITPAGE1_NVME_WRCACHE_DISABLE (0x00010000)
#define MPI26_IOUNITPAGE1_NVME_WRCACHE_NO_CHANGE (0x00020000)
#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000)
#define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000)
#define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000)
......@@ -1511,7 +1536,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
U32 BiosOptions; /*0x04 */
U32 IOCSettings; /*0x08 */
U8 SSUTimeout; /*0x0C */
U8 Reserved1; /*0x0D */
U8 MaxEnclosureLevel; /*0x0D */
U16 Reserved2; /*0x0E */
U32 DeviceSettings; /*0x10 */
U16 NumberOfDevices; /*0x14 */
......@@ -1530,7 +1555,6 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
#define MPI2_BIOSPAGE1_OPTIONS_BOOT_LIST_ADD_ALT_BOOT_DEVICE (0x00008000)
#define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800)
......@@ -3271,10 +3295,12 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
U16 NumSlots; /*0x18 */
U16 StartSlot; /*0x1A */
U8 ChassisSlot; /*0x1C */
U8 EnclosureLeve; /*0x1D */
U8 EnclosureLevel; /*0x1D */
U16 SEPDevHandle; /*0x1E */
U32 Reserved3; /*0x20 */
U32 Reserved4; /*0x24 */
U8 OEMRD; /*0x20 */
U8 Reserved1a; /*0x21 */
U16 Reserved2; /*0x22 */
U32 Reserved3; /*0x24 */
} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
*PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t,
......@@ -3285,6 +3311,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
#define MPI2_SASENCLOSURE0_PAGEVERSION (0x04)
/*values for SAS Enclosure Page 0 Flags field */
#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_VALID (0x0080)
#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_COLLECTING (0x0040)
#define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F)
......@@ -3298,6 +3326,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
#define MPI26_ENCLOSURE0_PAGEVERSION (0x04)
/*Values for Enclosure Page 0 Flags field */
#define MPI26_ENCLS0_FLAGS_OEMRD_VALID (0x0080)
#define MPI26_ENCLS0_FLAGS_OEMRD_COLLECTING (0x0040)
#define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
#define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
#define MPI26_ENCLS0_FLAGS_MNG_MASK (0x000F)
......@@ -3696,8 +3726,9 @@ typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA {
Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t;
/*values for LinkFlags */
#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS (0x00)
#define MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS (0x01)
#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SEPARATE_REFCLK (0x00)
#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRIS_EN (0x01)
#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN (0x02)
/*
*Host code (drivers, BIOS, utilities, etc.) should leave this define set to
......@@ -3714,7 +3745,7 @@ typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 {
U16 AdditionalControlFlags; /*0x0C */
U16 NVMeMaxQueueDepth; /*0x0E */
U8 NumPhys; /*0x10 */
U8 Reserved1; /*0x11 */
U8 DMDReportPCIe; /*0x11 */
U16 Reserved2; /*0x12 */
MPI26_PCIE_IO_UNIT1_PHY_DATA
PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */
......@@ -3736,6 +3767,12 @@ typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 {
#define MPI26_PCIEIOUNIT1_MAX_RATE_8_0 (0x40)
#define MPI26_PCIEIOUNIT1_MAX_RATE_16_0 (0x50)
/*values for PCIe IO Unit Page 1 DMDReportPCIe */
#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_MASK (0x80)
#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_1_SEC (0x00)
#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_16_SEC (0x80)
#define MPI26_PCIEIOUNIT1_DMDRPT_DELAY_TIME_MASK (0x7F)
/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
*values
*/
......@@ -3788,6 +3825,9 @@ typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 {
/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
/* defines for the Flags field */
#define MPI26_PCIESWITCH1_2_RETIMER_PRESENCE (0x0002)
#define MPI26_PCIESWITCH1_RETIMER_PRESENCE (0x0001)
/****************************************************************************
* PCIe Device Config Pages (MPI v2.6 and later)
......@@ -3849,19 +3889,21 @@ typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 {
*field
*/
/*values for PCIe Device Page 0 Flags field */
#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x4000)
#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x2000)
#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x0400)
#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x0200)
#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x0080)
#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x0040)
#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x0020)
#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x0010)
#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x0002)
#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x0001)
/*values for PCIe Device Page 0 Flags field*/
#define MPI26_PCIEDEV0_FLAGS_2_RETIMER_PRESENCE (0x00020000)
#define MPI26_PCIEDEV0_FLAGS_RETIMER_PRESENCE (0x00010000)
#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x00008000)
#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x00004000)
#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x00002000)
#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x00000400)
#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x00000200)
#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x00000100)
#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x00000080)
#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x00000040)
#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x00000020)
#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x00000010)
#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x00000002)
#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x00000001)
/* values for PCIe Device Page 0 SupportedLinkRates field */
#define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED (0x08)
......
drivers/scsi/mpt3sas/mpi/mpi2_image.h 0 → 100644
View file @ ff92b9dd
This diff is collapsed.
drivers/scsi/mpt3sas/mpi/mpi2_init.h
View file @ ff92b9dd
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright 2000-2015 Avago Technologies. All rights reserved.
* Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2_init.h
......
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
View file @ ff92b9dd
This diff is collapsed.
drivers/scsi/mpt3sas/mpi/mpi2_pci.h
View file @ ff92b9dd
/*
* Copyright 2012-2015 Avago Technologies. All rights reserved.
* Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2_pci.h
* Title: MPI PCIe Attached Devices structures and definitions.
* Creation Date: October 9, 2012
*
* mpi2_pci.h Version: 02.00.02
* mpi2_pci.h Version: 02.00.03
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
......@@ -23,6 +23,7 @@
* Removed SOP support.
* 07-01-16 02.00.02 Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to
* NVME Encapsulated Request.
* 07-22-18 02.00.03 Updted flags field for NVME Encapsulated req
* --------------------------------------------------------------------------
*/
......@@ -75,10 +76,10 @@ typedef struct _MPI26_NVME_ENCAPSULATED_REQUEST {
#define MPI26_NVME_FLAGS_SUBMISSIONQ_ADMIN (0x0010)
/*Error Response Address Space */
#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR (0x000C)
#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR_MASK (0x000C)
#define MPI26_NVME_FLAGS_SYSTEM_RSP_ADDR (0x0000)
#define MPI26_NVME_FLAGS_IOCPLB_RSP_ADDR (0x0008)
#define MPI26_NVME_FLAGS_IOCPLBNTA_RSP_ADDR (0x000C)
/*Data Direction*/
#define MPI26_NVME_FLAGS_IOCCTL_RSP_ADDR (0x0008)
/* Data Direction*/
#define MPI26_NVME_FLAGS_DATADIRECTION_MASK (0x0003)
#define MPI26_NVME_FLAGS_NODATATRANSFER (0x0000)
#define MPI26_NVME_FLAGS_WRITE (0x0001)
......
drivers/scsi/mpt3sas/mpi/mpi2_raid.h
View file @ ff92b9dd
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright 2000-2014 Avago Technologies. All rights reserved.
* Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2_raid.h
......
drivers/scsi/mpt3sas/mpi/mpi2_sas.h
View file @ ff92b9dd
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright 2000-2015 Avago Technologies. All rights reserved.
* Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2_sas.h
......
drivers/scsi/mpt3sas/mpi/mpi2_tool.h
View file @ ff92b9dd
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright 2000-2014 Avago Technologies. All rights reserved.
* Copyright 2000-2020 Broadcom Inc. All rights reserved.
*
*
* Name: mpi2_tool.h
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
* mpi2_tool.h Version: 02.00.14
* mpi2_tool.h Version: 02.00.15
*
* Version History
* ---------------
......@@ -38,6 +38,8 @@
* 11-18-14 02.00.13 Updated copyright information.
* 08-25-16 02.00.14 Added new values for the Flags field of Toolbox Clean
* Tool Request Message.
* 07-22-18 02.00.15 Added defines for new TOOLBOX_PCIE_LANE_MARGINING tool.
* Added option for DeviceInfo field in ISTWI tool.
* --------------------------------------------------------------------------
*/
......@@ -58,6 +60,7 @@
#define MPI2_TOOLBOX_BEACON_TOOL (0x05)
#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06)
#define MPI2_TOOLBOX_TEXT_DISPLAY_TOOL (0x07)
#define MPI26_TOOLBOX_BACKEND_PCIE_LANE_MARGIN (0x08)
/****************************************************************************
* Toolbox reply
......@@ -226,6 +229,13 @@ typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST {
#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE (0x80)
#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK (0x07)
/*MPI26 TOOLBOX Request MsgFlags defines */
#define MPI26_TOOLBOX_REQ_MSGFLAGS_ADDRESSING_MASK (0x01)
/*Request uses Man Page 43 device index addressing */
#define MPI26_TOOLBOX_REQ_MSGFLAGS_ADDRESSING_DEVINDEX (0x00)
/*Request uses Man Page 43 device info struct addressing */
#define MPI26_TOOLBOX_REQ_MSGFLAGS_ADDRESSING_DEVINFO (0x01)
/*Toolbox ISTWI Read Write Tool reply message */
typedef struct _MPI2_TOOLBOX_ISTWI_REPLY {
U8 Tool; /*0x00 */
......@@ -387,6 +397,64 @@ Mpi2ToolboxTextDisplayRequest_t,
#define MPI2_TOOLBOX_CONSOLE_FLAG_TIMESTAMP (0x01)
/***************************************************************************
* Toolbox Backend Lane Margining Tool
***************************************************************************
*/
/*Toolbox Backend Lane Margining Tool request message */
typedef struct _MPI26_TOOLBOX_LANE_MARGINING_REQUEST {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 ChainOffset; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U8 Command; /*0x0C */
U8 SwitchPort; /*0x0D */
U16 DevHandle; /*0x0E */
U8 RegisterOffset; /*0x10 */
U8 Reserved5; /*0x11 */
U16 DataLength; /*0x12 */
MPI25_SGE_IO_UNION SGL; /*0x14 */
} MPI26_TOOLBOX_LANE_MARGINING_REQUEST,
*PTR_MPI2_TOOLBOX_LANE_MARGINING_REQUEST,
Mpi26ToolboxLaneMarginingRequest_t,
*pMpi2ToolboxLaneMarginingRequest_t;
/* defines for the Command field */
#define MPI26_TOOL_MARGIN_COMMAND_ENTER_MARGIN_MODE (0x01)
#define MPI26_TOOL_MARGIN_COMMAND_READ_REGISTER_DATA (0x02)
#define MPI26_TOOL_MARGIN_COMMAND_WRITE_REGISTER_DATA (0x03)
#define MPI26_TOOL_MARGIN_COMMAND_EXIT_MARGIN_MODE (0x04)
/*Toolbox Backend Lane Margining Tool reply message */
typedef struct _MPI26_TOOLBOX_LANE_MARGINING_REPLY {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 MsgLength; /*0x02 */
U8 Function; /*0x03 */
U16 Reserved2; /*0x04 */
U8 Reserved3; /*0x06 */
U8 MsgFlags; /*0x07 */
U8 VP_ID; /*0x08 */
U8 VF_ID; /*0x09 */
U16 Reserved4; /*0x0A */
U16 Reserved5; /*0x0C */
U16 IOCStatus; /*0x0E */
U32 IOCLogInfo; /*0x10 */
U16 ReturnedDataLength; /*0x14 */
U16 Reserved6; /*0x16 */
} MPI26_TOOLBOX_LANE_MARGINING_REPLY,
*PTR_MPI26_TOOLBOX_LANE_MARGINING_REPLY,
Mpi26ToolboxLaneMarginingReply_t,
*pMpi26ToolboxLaneMarginingReply_t;
/*****************************************************************************
*
......
drivers/scsi/mpt3sas/mpt3sas_base.h
View file @ ff92b9dd
......@@ -55,6 +55,7 @@
#include "mpi/mpi2_tool.h"
#include "mpi/mpi2_sas.h"
#include "mpi/mpi2_pci.h"
#include "mpi/mpi2_image.h"
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7