Merge tag 'drm-misc-fixes-2019-04-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

 - core: Make atomic_enable and disable optional for CRTC
 - dw-hdmi: Lower max frequency for the Allwinner H6, SCDC configuration
            improvements for older controller versions
 - omap: a fix for the CEC clock management policy
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411151658.orm46ccd5zmrw27l@flea

drivers/gpu/drm/bridge/synopsys/dw-hdmi.c

@@ -1037,6 +1037,31 @@ void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
 }
 EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_write);
 
+/* Filter out invalid setups to avoid configuring SCDC and scrambling */
+static bool dw_hdmi_support_scdc(struct dw_hdmi *hdmi)
+{
+	struct drm_display_info *display = &hdmi->connector.display_info;
+
+	/* Completely disable SCDC support for older controllers */
+	if (hdmi->version < 0x200a)
+		return false;
+
+	/* Disable if SCDC is not supported, or if an HF-VSDB block is absent */
+	if (!display->hdmi.scdc.supported ||
+	    !display->hdmi.scdc.scrambling.supported)
+		return false;
+
+	/*
+	 * Disable if display only support low TMDS rates and scrambling
+	 * for low rates is not supported either
+	 */
+	if (!display->hdmi.scdc.scrambling.low_rates &&
+	    display->max_tmds_clock <= 340000)
+		return false;
+
+	return true;
+}
+
 /*
  * HDMI2.0 Specifies the following procedure for High TMDS Bit Rates:
  * - The Source shall suspend transmission of the TMDS clock and data
@@ -1055,7 +1080,7 @@ void dw_hdmi_set_high_tmds_clock_ratio(struct dw_hdmi *hdmi)
 	unsigned long mtmdsclock = hdmi->hdmi_data.video_mode.mtmdsclock;
 
 	/* Control for TMDS Bit Period/TMDS Clock-Period Ratio */
-	if (hdmi->connector.display_info.hdmi.scdc.supported) {
+	if (dw_hdmi_support_scdc(hdmi)) {
 		if (mtmdsclock > HDMI14_MAX_TMDSCLK)
 			drm_scdc_set_high_tmds_clock_ratio(hdmi->ddc, 1);
 		else
@@ -1579,8 +1604,9 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
 
 	/* Set up HDMI_FC_INVIDCONF */
 	inv_val = (hdmi->hdmi_data.hdcp_enable ||
-		   vmode->mtmdsclock > HDMI14_MAX_TMDSCLK ||
-		   hdmi_info->scdc.scrambling.low_rates ?
+		   (dw_hdmi_support_scdc(hdmi) &&
+		    (vmode->mtmdsclock > HDMI14_MAX_TMDSCLK ||
+		     hdmi_info->scdc.scrambling.low_rates)) ?
 		HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE :
 		HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE);
 
@@ -1646,7 +1672,7 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
 	}
 
 	/* Scrambling Control */
-	if (hdmi_info->scdc.supported) {
+	if (dw_hdmi_support_scdc(hdmi)) {
 		if (vmode->mtmdsclock > HDMI14_MAX_TMDSCLK ||
 		    hdmi_info->scdc.scrambling.low_rates) {
 			/*

drivers/gpu/drm/drm_atomic_helper.c

@@ -1034,7 +1034,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
 			funcs->atomic_disable(crtc, old_crtc_state);
 		else if (funcs->disable)
 			funcs->disable(crtc);
-		else
+		else if (funcs->dpms)
 			funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
 
 		if (!(dev->irq_enabled && dev->num_crtcs))
@@ -1277,10 +1277,9 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
 		if (new_crtc_state->enable) {
 			DRM_DEBUG_ATOMIC("enabling [CRTC:%d:%s]\n",
 					 crtc->base.id, crtc->name);
-
 			if (funcs->atomic_enable)
 				funcs->atomic_enable(crtc, old_crtc_state);
-			else
+			else if (funcs->commit)
 				funcs->commit(crtc);
 		}
 	}

drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c

@@ -175,6 +175,7 @@ static int hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
 		REG_FLD_MOD(core->base, HDMI_CORE_SYS_INTR_UNMASK4, 0, 3, 3);
 		hdmi_wp_clear_irqenable(core->wp, HDMI_IRQ_CORE);
 		hdmi_wp_set_irqstatus(core->wp, HDMI_IRQ_CORE);
+		REG_FLD_MOD(core->wp->base, HDMI_WP_CLK, 0, 5, 0);
 		hdmi4_core_disable(core);
 		return 0;
 	}
@@ -182,16 +183,24 @@ static int hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
 	if (err)
 		return err;
 
+	/*
+	 * Initialize CEC clock divider: CEC needs 2MHz clock hence
+	 * set the divider to 24 to get 48/24=2MHz clock
+	 */
+	REG_FLD_MOD(core->wp->base, HDMI_WP_CLK, 0x18, 5, 0);
+
 	/* Clear TX FIFO */
 	if (!hdmi_cec_clear_tx_fifo(adap)) {
 		pr_err("cec-%s: could not clear TX FIFO\n", adap->name);
-		return -EIO;
+		err = -EIO;
+		goto err_disable_clk;
 	}
 
 	/* Clear RX FIFO */
 	if (!hdmi_cec_clear_rx_fifo(adap)) {
 		pr_err("cec-%s: could not clear RX FIFO\n", adap->name);
-		return -EIO;
+		err = -EIO;
+		goto err_disable_clk;
 	}
 
 	/* Clear CEC interrupts */
@@ -236,6 +245,12 @@ static int hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
 		hdmi_write_reg(core->base, HDMI_CEC_INT_STATUS_1, temp);
 	}
 	return 0;
+
+err_disable_clk:
+	REG_FLD_MOD(core->wp->base, HDMI_WP_CLK, 0, 5, 0);
+	hdmi4_core_disable(core);
+
+	return err;
 }
 
 static int hdmi_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
@@ -333,11 +348,8 @@ int hdmi4_cec_init(struct platform_device *pdev, struct hdmi_core_data *core,
 		return ret;
 	core->wp = wp;
 
-	/*
-	 * Initialize CEC clock divider: CEC needs 2MHz clock hence
-	 * set the devider to 24 to get 48/24=2MHz clock
-	 */
-	REG_FLD_MOD(core->wp->base, HDMI_WP_CLK, 0x18, 5, 0);
+	/* Disable clock initially, hdmi_cec_adap_enable() manages it */
+	REG_FLD_MOD(core->wp->base, HDMI_WP_CLK, 0, 5, 0);
 
 	ret = cec_register_adapter(core->adap, &pdev->dev);
 	if (ret < 0) {

drivers/gpu/drm/omapdrm/dss/hdmi4_core.c

@@ -708,7 +708,7 @@ int hdmi4_audio_config(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
 	else
 		acore.i2s_cfg.justification = HDMI_AUDIO_JUSTIFY_RIGHT;
 	/*
-	 * The I2S input word length is twice the lenght given in the IEC-60958
+	 * The I2S input word length is twice the length given in the IEC-60958
 	 * status word. If the word size is greater than
 	 * 20 bits, increment by one.
 	 */

drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c

@@ -48,8 +48,13 @@ static enum drm_mode_status
 sun8i_dw_hdmi_mode_valid_h6(struct drm_connector *connector,
 			    const struct drm_display_mode *mode)
 {
-	/* This is max for HDMI 2.0b (4K@60Hz) */
-	if (mode->clock > 594000)
+	/*
+	 * Controller support maximum of 594 MHz, which correlates to
+	 * 4K@60Hz 4:4:4 or RGB. However, for frequencies greater than
+	 * 340 MHz scrambling has to be enabled. Because scrambling is
+	 * not yet implemented, just limit to 340 MHz for now.
+	 */
+	if (mode->clock > 340000)
 		return MODE_CLOCK_HIGH;
 
 	return MODE_OK;

drivers/gpu/drm/sun4i/sun8i_tcon_top.c

@@ -227,7 +227,7 @@ static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
 
 err_unregister_gates:
 	for (i = 0; i < CLK_NUM; i++)
-		if (clk_data->hws[i])
+		if (!IS_ERR_OR_NULL(clk_data->hws[i]))
 			clk_hw_unregister_gate(clk_data->hws[i]);
 	clk_disable_unprepare(tcon_top->bus);
 err_assert_reset:
@@ -245,6 +245,7 @@ static void sun8i_tcon_top_unbind(struct device *dev, struct device *master,
 
 	of_clk_del_provider(dev->of_node);
 	for (i = 0; i < CLK_NUM; i++)
+		if (clk_data->hws[i])
 			clk_hw_unregister_gate(clk_data->hws[i]);
 
 	clk_disable_unprepare(tcon_top->bus);

include/drm/drm_modeset_helper_vtables.h

@@ -418,6 +418,8 @@ struct drm_crtc_helper_funcs {
 	 * Drivers can use the @old_crtc_state input parameter if the operations
 	 * needed to enable the CRTC don't depend solely on the new state but
 	 * also on the transition between the old state and the new state.
+	 *
+	 * This function is optional.
 	 */
 	void (*atomic_enable)(struct drm_crtc *crtc,
 			      struct drm_crtc_state *old_crtc_state);
@@ -441,6 +443,8 @@ struct drm_crtc_helper_funcs {
 	 * parameter @old_crtc_state which could be used to access the old
 	 * state. Atomic drivers should consider to use this one instead
 	 * of @disable.
+	 *
+	 * This function is optional.
 	 */
 	void (*atomic_disable)(struct drm_crtc *crtc,
 			       struct drm_crtc_state *old_crtc_state);