dmaengine: sun4i: Add support for cyclic requests with dedicated DMA

Currently the cyclic transfers can be used only with normal DMAs. They
can be used by pcm_dmaengine module, which is required for implementing
sound with sun4i-hdmi encoder. This is so because the controller can
accept audio only from a dedicated DMA.

This patch enables them, following the existing style for the
scatter/gather type transfers.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200110141140.28527-2-stefan@olimex.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/dma/sun4i-dma.c

@@ -669,43 +669,41 @@ sun4i_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf, size_t len,
 	dma_addr_t src, dest;
 	u32 endpoints;
 	int nr_periods, offset, plength, i;
+	u8 ram_type, io_mode, linear_mode;
 
 	if (!is_slave_direction(dir)) {
 		dev_err(chan2dev(chan), "Invalid DMA direction\n");
 		return NULL;
 	}
 
-	if (vchan->is_dedicated) {
-		/*
-		 * As we are using this just for audio data, we need to use
-		 * normal DMA. There is nothing stopping us from supporting
-		 * dedicated DMA here as well, so if a client comes up and
-		 * requires it, it will be simple to implement it.
-		 */
-		dev_err(chan2dev(chan),
-			"Cyclic transfers are only supported on Normal DMA\n");
-		return NULL;
-	}
-
 	contract = generate_dma_contract();
 	if (!contract)
 		return NULL;
 
 	contract->is_cyclic = 1;
 
-	/* Figure out the endpoints and the address we need */
+	if (vchan->is_dedicated) {
+		io_mode = SUN4I_DDMA_ADDR_MODE_IO;
+		linear_mode = SUN4I_DDMA_ADDR_MODE_LINEAR;
+		ram_type = SUN4I_DDMA_DRQ_TYPE_SDRAM;
+	} else {
+		io_mode = SUN4I_NDMA_ADDR_MODE_IO;
+		linear_mode = SUN4I_NDMA_ADDR_MODE_LINEAR;
+		ram_type = SUN4I_NDMA_DRQ_TYPE_SDRAM;
+	}
+
 	if (dir == DMA_MEM_TO_DEV) {
 		src = buf;
 		dest = sconfig->dst_addr;
-		endpoints = SUN4I_DMA_CFG_SRC_DRQ_TYPE(SUN4I_NDMA_DRQ_TYPE_SDRAM) |
-			    SUN4I_DMA_CFG_DST_DRQ_TYPE(vchan->endpoint) |
-			    SUN4I_DMA_CFG_DST_ADDR_MODE(SUN4I_NDMA_ADDR_MODE_IO);
+		endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(vchan->endpoint) |
+			    SUN4I_DMA_CFG_DST_ADDR_MODE(io_mode) |
+			    SUN4I_DMA_CFG_SRC_DRQ_TYPE(ram_type);
 	} else {
 		src = sconfig->src_addr;
 		dest = buf;
-		endpoints = SUN4I_DMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) |
-			    SUN4I_DMA_CFG_SRC_ADDR_MODE(SUN4I_NDMA_ADDR_MODE_IO) |
-			    SUN4I_DMA_CFG_DST_DRQ_TYPE(SUN4I_NDMA_DRQ_TYPE_SDRAM);
+		endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(ram_type) |
+			    SUN4I_DMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) |
+			    SUN4I_DMA_CFG_SRC_ADDR_MODE(io_mode);
 	}
 
 	/*
@@ -747,8 +745,13 @@ sun4i_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf, size_t len,
 			dest = buf + offset;
 
 		/* Make the promise */
+		if (vchan->is_dedicated)
+			promise = generate_ddma_promise(chan, src, dest,
+							plength, sconfig);
+		else
 			promise = generate_ndma_promise(chan, src, dest,
 							plength, sconfig, dir);
+
 		if (!promise) {
 			/* TODO: should we free everything? */
 			return NULL;