Merge bk-internal.mysql.com:/home/bk/mysql-5.1

into  zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-5.1-maint

BitKeeper/etc/collapsed

@@ -5,5 +5,13 @@
 45001f7c3b2hhCXDKfUvzkX9TNe6VA
 45002051rHJfMEXAIMiAZV0clxvKSA
 4513d8e4Af4dQWuk13sArwofRgFDQw
+45143312u0Tz4r0wPXCbUKwdHa2jWA
+45143b90ewOQuTW8-jrB3ZSAQvMRJw
+45184588w9U72A6KX1hUFeAC4shSHA
+45185df8mZbxfp85FbA0VxUXkmDewA
 4519a6c5BVUxEHTf5iJnjZkixMBs8g
 451ab499rgdjXyOnUDqHu-wBDoS-OQ
+451b110a3ZV6MITl93ehXk2wxrbW7g
+45214442pBGT9KuZEGixBH71jTzbOA
+45214a07hVsIGwvwa-WrO-jpeaSwVw
+452a92d0-31-8wSzSfZi165fcGcXPA

client/Makefile.am

@@ -46,7 +46,8 @@ mysqladmin_SOURCES =		mysqladmin.cc
 mysql_LDADD =			@readline_link@ @TERMCAP_LIB@ $(LDADD) $(CXXLDFLAGS)
 mysqltest_SOURCES=		mysqltest.c $(top_srcdir)/mysys/my_getsystime.c \
 				$(yassl_dummy_link_fix)
-mysqltest_LDADD =		$(top_builddir)/regex/libregex.a $(LDADD)
+mysqltest_LDADD =		$(top_builddir)/regex/libregex.a $(LDADD) \
+				$(top_builddir)/mysys/libmysys.a
 mysqlbinlog_SOURCES =		mysqlbinlog.cc $(top_srcdir)/mysys/mf_tempdir.c \
 				$(top_srcdir)/mysys/my_new.cc \
 				$(top_srcdir)/mysys/my_bit.c \

client/mysql.cc

@@ -386,6 +386,21 @@ int main(int argc,char *argv[])
   else
     status.add_to_history=1;
   status.exit_status=1;
+
+  {
+    /* 
+     The file descriptor-layer may be out-of-sync with the file-number layer,
+     so we make sure that "stdout" is really open.  If its file is closed then
+     explicitly close the FD layer. 
+    */
+    int stdout_fileno_copy;
+    stdout_fileno_copy= dup(fileno(stdout)); /* Okay if fileno fails. */
+    if (stdout_fileno_copy == -1)
+      fclose(stdout);
+    else
+      close(stdout_fileno_copy);             /* Clean up dup(). */
+  }
+
   load_defaults("my",load_default_groups,&argc,&argv);
   defaults_argv=argv;
   if (get_options(argc, (char **) argv))

client/mysqldump.c

@@ -3405,7 +3405,7 @@ static int do_reset_master(MYSQL *mysql_con)
 }
 
 
-static int start_transaction(MYSQL *mysql_con, my_bool consistent_read_now)
+static int start_transaction(MYSQL *mysql_con)
 {
   /*
     We use BEGIN for old servers. --single-transaction --master-data will fail
@@ -3420,10 +3420,8 @@ static int start_transaction(MYSQL *mysql_con, my_bool consistent_read_now)
                                         "SET SESSION TRANSACTION ISOLATION "
                                         "LEVEL REPEATABLE READ") ||
           mysql_query_with_error_report(mysql_con, 0,
-                                        consistent_read_now ?
                                         "START TRANSACTION "
-                                        "WITH CONSISTENT SNAPSHOT" :
-                                        "BEGIN"));
+                                        "/*!40100 WITH CONSISTENT SNAPSHOT */"));
 }
 
 
@@ -3913,7 +3911,7 @@ int main(int argc, char **argv)
   if ((opt_lock_all_tables || opt_master_data) &&
       do_flush_tables_read_lock(mysql))
     goto err;
-  if (opt_single_transaction && start_transaction(mysql, test(opt_master_data)))
+  if (opt_single_transaction && start_transaction(mysql))
       goto err;
   if (opt_delete_master_logs && do_reset_master(mysql))
     goto err;

include/my_time.h

@@ -57,6 +57,16 @@ typedef long my_time_t;
 #define TIME_NO_ZERO_DATE	(TIME_NO_ZERO_IN_DATE*2)
 #define TIME_INVALID_DATES	(TIME_NO_ZERO_DATE*2)
 
+#define MYSQL_TIME_WARN_TRUNCATED    1
+#define MYSQL_TIME_WARN_OUT_OF_RANGE 2
+
+/* Limits for the TIME data type */
+#define TIME_MAX_HOUR 838
+#define TIME_MAX_MINUTE 59
+#define TIME_MAX_SECOND 59
+#define TIME_MAX_VALUE (TIME_MAX_HOUR*10000 + TIME_MAX_MINUTE*100 + \
+                        TIME_MAX_SECOND)
+
 enum enum_mysql_timestamp_type
 str_to_datetime(const char *str, uint length, MYSQL_TIME *l_time,
                 uint flags, int *was_cut);
@@ -69,7 +79,9 @@ ulonglong TIME_to_ulonglong(const MYSQL_TIME *time);
 
 
 my_bool str_to_time(const char *str,uint length, MYSQL_TIME *l_time,
-                    int *was_cut);
+                    int *warning);
+
+int check_time_range(struct st_mysql_time *time, int *warning);
 
 long calc_daynr(uint year,uint month,uint day);
 uint calc_days_in_year(uint year);
@@ -98,14 +110,24 @@ int my_datetime_to_str(const MYSQL_TIME *l_time, char *to);
 int my_TIME_to_str(const MYSQL_TIME *l_time, char *to);
 
 /* 
-  The following must be sorted so that simple intervals comes first.
-  (get_interval_value() depends on this)
+  Available interval types used in any statement.
+
+  'interval_type' must be sorted so that simple intervals comes first,
+  ie year, quarter, month, week, day, hour, etc. The order based on
+  interval size is also important and the intervals should be kept in a
+  large to smaller order. (get_interval_value() depends on this)
+ 
+  Note: If you change the order of elements in this enum you should fix 
+  order of elements in 'interval_type_to_name' and 'interval_names' 
+  arrays 
+  
+  See also interval_type_to_name, get_interval_value, interval_names
 */
 
 enum interval_type
 {
-  INTERVAL_YEAR, INTERVAL_QUARTER, INTERVAL_MONTH, INTERVAL_DAY, INTERVAL_HOUR,
-  INTERVAL_MINUTE, INTERVAL_WEEK, INTERVAL_SECOND, INTERVAL_MICROSECOND ,
+  INTERVAL_YEAR, INTERVAL_QUARTER, INTERVAL_MONTH, INTERVAL_WEEK, INTERVAL_DAY,
+  INTERVAL_HOUR, INTERVAL_MINUTE, INTERVAL_SECOND, INTERVAL_MICROSECOND,
   INTERVAL_YEAR_MONTH, INTERVAL_DAY_HOUR, INTERVAL_DAY_MINUTE,
   INTERVAL_DAY_SECOND, INTERVAL_HOUR_MINUTE, INTERVAL_HOUR_SECOND,
   INTERVAL_MINUTE_SECOND, INTERVAL_DAY_MICROSECOND, INTERVAL_HOUR_MICROSECOND,

mysql-test/extra/rpl_tests/rpl_flsh_tbls.test

@@ -7,6 +7,8 @@
 
 -- source include/master-slave.inc
 
+let $SERVER_VERSION=`select version()`;
+
 create table t1 (a int);
 insert into t1 values (10);
 create table t2 (a int);

mysql-test/extra/rpl_tests/rpl_truncate_helper.test

@@ -36,6 +36,7 @@ SELECT * FROM t1;
 --echo **** On Master ****
 connection master;
 DROP TABLE t1;
+let $SERVER_VERSION=`select version()`;
 --replace_result $SERVER_VERSION SERVER_VERSION
 --replace_regex /\/\* xid=[0-9]+ \*\//\/* xid= *\// /table_id: [0-9]+/table_id: #/
 SHOW BINLOG EVENTS;

mysql-test/include/ctype_like_escape.inc

@@ -11,8 +11,8 @@ insert into t1 values('ab_def');
 insert into t1 values('abc_ef');
 insert into t1 values('abcd_f');
 insert into t1 values('abcde_');
--- should return ab_def
+# should return ab_def
 select c1 as c1u from t1 where c1 like 'ab\_def';
--- should return ab_def
+# should return ab_def
 select c1 as c2h from t1 where c1 like 'ab#_def' escape '#';
 drop table t1;

mysql-test/include/mysqltest_while.inc

-let $1 = 10;
-while ($1)
-{
-while ($1)
-{
-while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
- while ($1)
-{
-  echo $1;
-  dec $1;
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}
-}

mysql-test/include/sourced.inc

-echo here is the sourced script;

mysql-test/include/sourced1.inc

---source include/sourced.inc

mysql-test/lib/mtr_cases.pl

@@ -152,43 +152,79 @@ sub collect_test_cases ($) {
     closedir TESTDIR;
   }
 
-  # To speed things up, we sort first in if the test require a restart
-  # or not, second in alphanumeric order.
-
+  # Reorder the test cases in an order that wil make them faster to run
   if ( $::opt_reorder )
   {
 
     my %sort_criteria;
-    my $tinfo;
 
     # Make a mapping of test name to a string that represents how that test
     # should be sorted among the other tests.  Put the most important criterion
     # first, then a sub-criterion, then sub-sub-criterion, et c.
-    foreach $tinfo (@$cases) 
+    foreach my $tinfo (@$cases)
+    {
+      my @criteria = ();
+
+      # Look for tests that muct be in run in a defined order
+      # that is defined by test having the same name except for
+      # the ending digit
+
+      # Put variables into hash
+      my $test_name= $tinfo->{'name'};
+      my $depend_on_test_name;
+      if ( $test_name =~ /^([\D]+)([0-9]{1})$/ )
+      {
+	my $base_name= $1;
+	my $idx= $2;
+	mtr_verbose("$test_name =>  $base_name idx=$idx");
+	if ( $idx > 1 )
+	{
+	  $idx-= 1;
+	  $base_name= "$base_name$idx";
+	  mtr_verbose("New basename $base_name");
+	}
+
+	foreach my $tinfo2 (@$cases)
+	{
+	  if ( $tinfo2->{'name'} eq $base_name )
 	  {
-      my @this_criteria = ();
+	    mtr_verbose("found dependent test $tinfo2->{'name'}");
+	    $depend_on_test_name=$base_name;
+	  }
+	}
+      }
 
+      if ( defined $depend_on_test_name )
+      {
+	mtr_verbose("Giving $test_name same critera as $depend_on_test_name");
+	$sort_criteria{$test_name} = $sort_criteria{$depend_on_test_name};
+      }
+      else
+      {
+	#
 	# Append the criteria for sorting, in order of importance.
-      push(@this_criteria, join("!", sort @{$tinfo->{'master_opt'}}) . "~");  # Ending with "~" makes empty sort later than filled
-      push(@this_criteria, "ndb=" . ($tinfo->{'ndb_test'} ? "1" : "0"));
-      push(@this_criteria, "restart=" . ($tinfo->{'master_restart'} ? "1" : "0"));
-      push(@this_criteria, "big_test=" . ($tinfo->{'big_test'} ? "1" : "0"));
-      push(@this_criteria, join("|", sort keys %{$tinfo}));  # Group similar things together.  The values may differ substantially.  FIXME?
-      push(@this_criteria, $tinfo->{'name'});   # Finally, order by the name
+	#
+	push(@criteria, "ndb=" . ($tinfo->{'ndb_test'} ? "1" : "0"));
+	# Group test with equal options together.
+	# Ending with "~" makes empty sort later than filled
+	push(@criteria, join("!", sort @{$tinfo->{'master_opt'}}) . "~");
 
-      $sort_criteria{$tinfo->{"name"}} = join(" ", @this_criteria);
+	$sort_criteria{$test_name} = join(" ", @criteria);
+      }
     }
 
-    @$cases = sort { $sort_criteria{$a->{"name"}} cmp $sort_criteria{$b->{"name"}}; } @$cases;
+    @$cases = sort {
+      $sort_criteria{$a->{'name'}} . $a->{'name'} cmp
+	$sort_criteria{$b->{'name'}} . $b->{'name'}; } @$cases;
 
-###  For debugging the sort-order
-#    foreach $tinfo (@$cases) 
-#    {
-#      print $sort_criteria{$tinfo->{"name"}};
-#      print " -> \t";
-#      print $tinfo->{"name"};
-#      print "\n";
-#    }
+    if ( $::opt_script_debug )
+    {
+      # For debugging the sort-order
+      foreach my $tinfo (@$cases)
+      {
+	print("$sort_criteria{$tinfo->{'name'}} -> \t$tinfo->{'name'}\n");
+      }
+    }
   }
 
   return $cases;
@@ -245,6 +281,7 @@ sub collect_one_test_case($$$$$$$) {
   $tinfo->{'path'}= $path;
   $tinfo->{'timezone'}= "GMT-3"; # for UNIX_TIMESTAMP tests to work
 
+  $tinfo->{'slave_num'}= 0; # Default, no slave
   if ( defined mtr_match_prefix($tname,"rpl") )
   {
     if ( $::opt_skip_rpl )
@@ -254,7 +291,8 @@ sub collect_one_test_case($$$$$$$) {
       return;
     }
 
-    $tinfo->{'slave_num'}= 1;           # Default, use one slave
+
+    $tinfo->{'slave_num'}= 1; # Default for rpl* tests, use one slave
 
     if ( $tname eq 'rpl_failsafe' or $tname eq 'rpl_chain_temp_table' )
     {
@@ -272,18 +310,18 @@ sub collect_one_test_case($$$$$$$) {
   {
     # This is an ndb test or all tests should be run with ndb cluster started
     $tinfo->{'ndb_test'}= 1;
-    if ( $::opt_skip_ndbcluster )
+    if ( ! $::opt_ndbcluster_supported )
     {
-      # All ndb test's should be skipped
+      # Ndb is not supported, skip them
       $tinfo->{'skip'}= 1;
-      $tinfo->{'comment'}= "No ndbcluster test(--skip-ndbcluster)";
+      $tinfo->{'comment'}= "No ndbcluster support";
       return;
     }
-    if ( ! $::opt_ndbcluster_supported )
+    elsif ( $::opt_skip_ndbcluster )
     {
-      # Ndb is not supported, skip them
+      # All ndb test's should be skipped
       $tinfo->{'skip'}= 1;
-      $tinfo->{'comment'}= "No ndbcluster support";
+      $tinfo->{'comment'}= "No ndbcluster tests(--skip-ndbcluster)";
       return;
     }
   }
@@ -316,57 +354,58 @@ sub collect_one_test_case($$$$$$$) {
 
   if ( -f $master_opt_file )
   {
-    $tinfo->{'master_restart'}= 1;    # We think so for now
 
-  MASTER_OPT:
-    {
     my $master_opt= mtr_get_opts_from_file($master_opt_file);
 
     foreach my $opt ( @$master_opt )
     {
       my $value;
 
-        # This is a dirty hack from old mysql-test-run, we use the opt
-        # file to flag other things as well, it is not a opt list at
-        # all
+      # The opt file is used both to send special options to the mysqld
+      # as well as pass special test case specific options to this
+      # script
 
       $value= mtr_match_prefix($opt, "--timezone=");
       if ( defined $value )
       {
 	$tinfo->{'timezone'}= $value;
-          last MASTER_OPT;
+	next;
       }
 
       $value= mtr_match_prefix($opt, "--result-file=");
       if ( defined $value )
       {
+	# Specifies the file mysqltest should compare
+	# output against
 	$tinfo->{'result_file'}= "r/$value.result";
-          if ( $::opt_result_ext and $::opt_record or
-               -f "$tinfo->{'result_file'}$::opt_result_ext")
-          {
-            $tinfo->{'result_file'}.= $::opt_result_ext;
-          }
-          $tinfo->{'master_restart'}= 0;
-          last MASTER_OPT;
+	next;
       }
 
       # If we set default time zone, remove the one we have
       $value= mtr_match_prefix($opt, "--default-time-zone=");
       if ( defined $value )
       {
-          $tinfo->{'master_opt'}= [];
+	$tinfo->{'timezone'}= "";
+	# Fallthrough, add this option
       }
 
+      # The --restart option forces a restart even if no special
+      # option is set. If the options are the same as next testcase
+      # there is no need to restart after the testcase
+      # has completed
+      if ( $opt eq "--force-restart" )
+      {
+	$tinfo->{'force_restart'}= 1;
+	next;
       }
 
-      # Ok, this was a real option list, add it
-      push(@{$tinfo->{'master_opt'}}, @$master_opt);
+      # Ok, this was a real option, add it
+      push(@{$tinfo->{'master_opt'}}, $opt);
     }
   }
 
   if ( -f $slave_opt_file )
   {
-    $tinfo->{'slave_restart'}= 1;
     my $slave_opt= mtr_get_opts_from_file($slave_opt_file);
 
     foreach my $opt ( @$slave_opt )
@@ -381,7 +420,6 @@ sub collect_one_test_case($$$$$$$) {
   if ( -f $slave_mi_file )
   {
     $tinfo->{'slave_mi'}= mtr_get_opts_from_file($slave_mi_file);
-    $tinfo->{'slave_restart'}= 1;
   }
 
   if ( -f $master_sh )
@@ -395,7 +433,6 @@ sub collect_one_test_case($$$$$$$) {
     else
     {
       $tinfo->{'master_sh'}= $master_sh;
-      $tinfo->{'master_restart'}= 1;
     }
   }
 
@@ -410,7 +447,6 @@ sub collect_one_test_case($$$$$$$) {
     else
     {
       $tinfo->{'slave_sh'}= $slave_sh;
-      $tinfo->{'slave_restart'}= 1;
     }
   }
 
@@ -515,17 +551,6 @@ sub collect_one_test_case($$$$$$$) {
       return;
     }
   }
-
-  # We can't restart a running server that may be in use
-
-  if ( $::glob_use_running_server and
-       ( $tinfo->{'master_restart'} or $tinfo->{'slave_restart'} ) )
-  {
-    $tinfo->{'skip'}= 1;
-    $tinfo->{'comment'}= "Can't restart a running server";
-    return;
-  }
-
 }
 
 

mysql-test/lib/mtr_gcov.pl

@@ -23,12 +23,28 @@ sub gcov_prepare () {
     -or -name \*.da | xargs rm`;
 }
 
+# Used by gcov
+our @mysqld_src_dirs=
+  (
+   "strings",
+   "mysys",
+   "include",
+   "extra",
+   "regex",
+   "isam",
+   "merge",
+   "myisam",
+   "myisammrg",
+   "heap",
+   "sql",
+  );
+
 sub gcov_collect () {
 
   print "Collecting source coverage info...\n";
   -f $::opt_gcov_msg and unlink($::opt_gcov_msg);
   -f $::opt_gcov_err and unlink($::opt_gcov_err);
-  foreach my $d ( @::mysqld_src_dirs )
+  foreach my $d ( @mysqld_src_dirs )
   {
     chdir("$::glob_basedir/$d");
     foreach my $f ( (glob("*.h"), glob("*.cc"), glob("*.c")) )

mysql-test/lib/mtr_io.pl

@@ -12,6 +12,7 @@ sub mtr_fromfile ($);
 sub mtr_tofile ($@);
 sub mtr_tonewfile($@);
 sub mtr_lastlinefromfile($);
+sub mtr_appendfile_to_file ($$);
 
 ##############################################################################
 #
@@ -170,4 +171,17 @@ sub mtr_tonewfile ($@) {
   close FILE;
 }
 
+sub mtr_appendfile_to_file ($$) {
+  my $from_file=  shift;
+  my $to_file=  shift;
+
+  open(TOFILE,">>",$to_file) or mtr_error("can't open file \"$to_file\": $!");
+  open(FROMFILE,"<",$from_file)
+    or mtr_error("can't open file \"$from_file\": $!");
+  print TOFILE while (<FROMFILE>);
+  close FROMFILE;
+  close TOFILE;
+}
+
+
 1;

mysql-test/lib/mtr_process.pl

@@ -4,7 +4,6 @@
 # and is part of the translation of the Bourne shell script with the
 # same name.
 
-#use Carp qw(cluck);
 use Socket;
 use Errno;
 use strict;
@@ -93,8 +92,6 @@ sub spawn_impl ($$$$$$$$) {
   my $pid_file=   shift;                 # FIXME
   my $spawn_opts= shift;
 
-  mtr_error("Can't spawn with empty \"path\"") unless defined $path;
-
   if ( $::opt_script_debug )
   {
     print STDERR "\n";
@@ -118,6 +115,9 @@ sub spawn_impl ($$$$$$$$) {
     print STDERR "#### ", "-" x 78, "\n";
   }
 
+  mtr_error("Can't spawn with empty \"path\"") unless defined $path;
+
+
  FORK:
   {
     my $pid= fork();
@@ -339,19 +339,6 @@ sub mtr_kill_leftovers () {
   mtr_report("Killing Possible Leftover Processes");
   mtr_debug("mtr_kill_leftovers(): started.");
 
-  mkpath("$::opt_vardir/log"); # Needed for mysqladmin log
-
-  # Stop or kill Instance Manager and all its children. If we failed to do
-  # that, we can only abort -- there is nothing left to do.
-
-  mtr_error("Failed to stop Instance Manager.")
-    unless mtr_im_stop($::instance_manager);
-
-  # Start shutdown of masters and slaves. Don't touch IM-managed mysqld
-  # instances -- they should be stopped by mtr_im_stop().
-
-  mtr_debug("Shutting down mysqld-instances...");
-
   my @kill_pids;
   my %admin_pids;
 
@@ -377,8 +364,9 @@ sub mtr_kill_leftovers () {
     $srv->{'pid'}= 0; # Assume we are done with it
   }
 
+  if ( ! $::opt_skip_ndbcluster )
+  {
     # Start shutdown of clusters.
-
     mtr_debug("Shutting down cluster...");
 
     foreach my $cluster (@{$::clusters})
@@ -399,7 +387,6 @@ sub mtr_kill_leftovers () {
 
       $cluster->{'pid'}= 0; # Assume we are done with it
 
-
       foreach my $ndbd (@{$cluster->{'ndbds'}})
       {
 	mtr_debug("    - ndbd " .
@@ -413,6 +400,7 @@ sub mtr_kill_leftovers () {
 	$ndbd->{'pid'}= 0; # Assume we are done with it
       }
     }
+  }
 
   # Wait for all the admin processes to complete
   mtr_wait_blocking(\%admin_pids);

mysql-test/lib/mtr_report.pl

@@ -53,13 +53,6 @@ sub mtr_show_failed_diff ($) {
   {
     $result_file=  $eval_file;
   }
-  elsif ( $::opt_result_ext and
-          ( $::opt_record or -f "$result_file$::opt_result_ext" ))
-  {
-    # If we have an special externsion for result files we use it if we are
-    # recording or a result file with that extension exists.
-    $result_file=  "$result_file$::opt_result_ext";
-  }
 
   my $diffopts= $::opt_udiff ? "-u" : "-c";
 
@@ -151,9 +144,11 @@ sub mtr_report_test_failed ($) {
     print "[ fail ]\n";
   }
 
-  # FIXME Instead of this test, and meaningless error message in 'else'
-  # we should write out into $::path_timefile when the error occurs.
-  if ( -f $::path_timefile )
+  if ( $tinfo->{'comment'} )
+  {
+    print "\nERROR: $tinfo->{'comment'}\n";
+  }
+  elsif ( -f $::path_timefile )
   {
     print "\nErrors are (from $::path_timefile) :\n";
     print mtr_fromfile($::path_timefile); # FIXME print_file() instead
@@ -177,7 +172,7 @@ sub mtr_report_stats ($) {
   my $tot_failed= 0;
   my $tot_tests=  0;
   my $tot_restarts= 0;
-  my $found_problems= 0;            # Some warnings are errors...
+  my $found_problems= 0; # Some warnings in the logfiles are errors...
 
   foreach my $tinfo (@$tests)
   {
@@ -288,6 +283,7 @@ sub mtr_report_stats ($) {
 
   print "\n";
 
+  # Print a list of testcases that failed
   if ( $tot_failed != 0 )
   {
     my $test_mode= join(" ", @::glob_test_mode) || "default";
@@ -301,7 +297,30 @@ sub mtr_report_stats ($) {
       }
     }
     print "\n";
+
+  }
+
+  # Print a list of check_testcases that failed(if any)
+  if ( $::opt_check_testcases )
+  {
+    my @check_testcases= ();
+
+    foreach my $tinfo (@$tests)
+    {
+      if ( defined $tinfo->{'check_testcase_failed'} )
+      {
+	push(@check_testcases, $tinfo->{'name'});
       }
+    }
+
+    if ( @check_testcases )
+    {
+      print "Check of testcase failed for: ";
+      print join(" ", @check_testcases);
+      print "\n\n";
+    }
+  }
+
   if ( $tot_failed != 0 || $found_problems)
   {
     mtr_error("there where failing test cases");

mysql-test/r/binlog_row_mix_innodb_myisam.result

@@ -220,7 +220,7 @@ select (@before:=unix_timestamp())*0;
 (@before:=unix_timestamp())*0
 0
 begin;
- select * from t1 for update;
+select * from t1 for update;
 insert into t2 values (20);
 ERROR HY000: Lock wait timeout exceeded; try restarting transaction
 select (@after:=unix_timestamp())*0;

mysql-test/r/binlog_stm_mix_innodb_myisam.result

@@ -195,7 +195,7 @@ select (@before:=unix_timestamp())*0;
 (@before:=unix_timestamp())*0
 0
 begin;
- select * from t1 for update;
+select * from t1 for update;
 insert into t2 values (20);
 ERROR HY000: Lock wait timeout exceeded; try restarting transaction
 select (@after:=unix_timestamp())*0;

mysql-test/r/check.result

 drop table if exists t1;
 create table t1(n int not null, key(n), key(n), key(n), key(n));
- check table t1 extended;
+check table t1 extended;
 insert into t1 values (200000);
 Table	Op	Msg_type	Msg_text
 test.t1	check	status	OK

mysql-test/r/csv.result

@@ -4913,8 +4913,7 @@ bonfire
 Colombo
 nondecreasing
 DROP TABLE t1;
-ALTER TABLE t2 RENAME t1
-#;
+ALTER TABLE t2 RENAME t1;
 DROP TABLE t1;
 CREATE TABLE t1 (
 Period smallint(4) unsigned zerofill DEFAULT '0000' NOT NULL,

mysql-test/r/drop.result

@@ -79,9 +79,9 @@ drop table if exists t1;
 create table t1 (i int);
 lock tables t1 read;
 create database mysqltest;
- drop table t1;
+drop table t1;
 show open tables;
- drop database mysqltest;
+drop database mysqltest;
 select 1;
 1
 1

mysql-test/r/flush.result

@@ -9,13 +9,13 @@ n
 flush tables with read lock;
 drop table t2;
 ERROR HY000: Can't execute the query because you have a conflicting read lock
- drop table t2;
+drop table t2;
 unlock tables;
 create database mysqltest;
 create table mysqltest.t1(n int);
 insert into mysqltest.t1 values (23);
 flush tables with read lock;
- drop database mysqltest;
+drop database mysqltest;
 select * from mysqltest.t1;
 n
 23
@@ -51,7 +51,7 @@ drop table t1, t2, t3;
 create table t1 (c1 int);
 create table t2 (c1 int);
 lock table t1 write;
- flush tables with read lock;
- insert into t2 values(1);
+flush tables with read lock;
+insert into t2 values(1);
 unlock tables;
 drop table t1, t2;

mysql-test/r/flush_block_commit.result

@@ -5,7 +5,7 @@ insert into t1 values(1);
 flush tables with read lock;
 select * from t1;
 a
- commit;
+commit;
 select * from t1;
 a
 unlock tables;
@@ -14,8 +14,8 @@ select * from t1 for update;
 a
 1
 begin;
- select * from t1 for update;
- flush tables with read lock;
+select * from t1 for update;
+flush tables with read lock;
 commit;
 a
 1
@@ -45,7 +45,7 @@ flush tables with read lock;
 show master status;
 File	Position	Binlog_Do_DB	Binlog_Ignore_DB
 master-bin.000001	102		
- commit;
+commit;
 show master status;
 File	Position	Binlog_Do_DB	Binlog_Ignore_DB
 master-bin.000001	102		

mysql-test/r/flush_read_lock_kill.result

 drop table if exists t1;
 create table t1 (kill_id int);
 insert into t1 values(connection_id());
- flush tables with read lock;
+flush tables with read lock;
 select ((@id := kill_id) - kill_id) from t1;
 ((@id := kill_id) - kill_id)
 0

mysql-test/r/flush_table.result

@@ -9,7 +9,7 @@ test.t1	check	status	OK
 unlock tables;
 lock table t1 read;
 lock table t1 read;
- flush table t1;
+flush table t1;
 select * from t1;
 a
 1
@@ -19,7 +19,7 @@ a
 1
 unlock tables;
 lock table t1 write;
- lock table t1 read;
+lock table t1 read;
 flush table t1;
 select * from t1;
 a
@@ -27,7 +27,7 @@ a
 unlock tables;
 unlock tables;
 lock table t1 read;
- lock table t1 write;
+lock table t1 write;
 flush table t1;
 select * from t1;
 a

mysql-test/r/func_compress.result

@@ -79,6 +79,16 @@ uncompress(a)	uncompressed_length(a)
 NULL	NULL
 a	1
 drop table t1;
+create table t1(a blob);
+insert into t1 values ('0'), (NULL), ('0');
+select compress(a), compress(a) from t1;
+select compress(a) is null from t1;
+compress(a) is null
+0
+1
+0
+drop table t1;
+End of 4.1 tests
 create table t1 (a varchar(32) not null);
 insert into t1 values ('foo');
 explain select * from t1 where uncompress(a) is null;

mysql-test/r/func_date_add.result

@@ -71,3 +71,17 @@ NULL
 NULL
 NULL
 drop table t1;
+End of 4.1 tests
+SELECT CAST('2006-09-26' AS DATE) + INTERVAL 1 DAY;
+CAST('2006-09-26' AS DATE) + INTERVAL 1 DAY
+2006-09-27
+SELECT CAST('2006-09-26' AS DATE) + INTERVAL 1 MONTH;
+CAST('2006-09-26' AS DATE) + INTERVAL 1 MONTH
+2006-10-26
+SELECT CAST('2006-09-26' AS DATE) + INTERVAL 1 YEAR;
+CAST('2006-09-26' AS DATE) + INTERVAL 1 YEAR
+2007-09-26
+SELECT CAST('2006-09-26' AS DATE) + INTERVAL 1 WEEK;
+CAST('2006-09-26' AS DATE) + INTERVAL 1 WEEK
+2006-10-03
+End of 5.0 tests

mysql-test/r/func_misc.result

@@ -63,7 +63,7 @@ FROM t1
 WHERE conn = 'default';
 IS_USED_LOCK('bug16501') = connection_id
 1
- SELECT GET_LOCK('bug16501',600);
+SELECT GET_LOCK('bug16501',600);
 SELECT IS_USED_LOCK('bug16501') = CONNECTION_ID();
 IS_USED_LOCK('bug16501') = CONNECTION_ID()
 1

mysql-test/r/func_sapdb.result

@@ -107,7 +107,9 @@ subtime("02:01:01.999999", "01:01:01.999999")
 01:00:00.000000
 select timediff("1997-01-01 23:59:59.000001","1995-12-31 23:59:59.000002");
 timediff("1997-01-01 23:59:59.000001","1995-12-31 23:59:59.000002")
-8807:59:59.999999
+838:59:59
+Warnings:
+Warning	1292	Truncated incorrect time value: '8807:59:59.999999'
 select timediff("1997-12-31 23:59:59.000001","1997-12-30 01:01:01.000002");
 timediff("1997-12-31 23:59:59.000001","1997-12-30 01:01:01.000002")
 46:58:57.999999
@@ -219,13 +221,16 @@ SELECT TIMEDIFF(t1, t4) As ttt, TIMEDIFF(t2, t3) As qqq,
 TIMEDIFF(t3, t2) As eee, TIMEDIFF(t2, t4) As rrr from test;
 ttt	qqq	eee	rrr
 -744:00:00	NULL	NULL	NULL
-26305:01:02	22:58:58	-22:58:58	NULL
--26305:01:02	-22:58:58	22:58:58	NULL
+838:59:59	22:58:58	-22:58:58	NULL
+-838:59:59	-22:58:58	22:58:58	NULL
 NULL	26:02:02	-26:02:02	NULL
 00:00:00	-26:02:02	26:02:02	NULL
 NULL	NULL	NULL	NULL
 NULL	NULL	NULL	NULL
 00:00:00	-24:00:00	24:00:00	NULL
+Warnings:
+Warning	1292	Truncated incorrect time value: '26305:01:02'
+Warning	1292	Truncated incorrect time value: '-26305:01:02'
 drop table t1, test;
 select addtime("-01:01:01.01", "-23:59:59.1") as a;
 a
@@ -235,7 +240,9 @@ a
 10000
 select microsecond(19971231235959.01) as a;
 a
-10000
+0
+Warnings:
+Warning	1292	Truncated incorrect time value: '19971231235959.01'
 select date_add("1997-12-31",INTERVAL "10.09" SECOND_MICROSECOND) as a;
 a
 1997-12-31 00:00:10.090000

mysql-test/r/func_time.result

@@ -339,7 +339,9 @@ extract(DAY_MINUTE FROM "02 10:11:12")
 21011
 select extract(DAY_SECOND FROM "225 10:11:12");
 extract(DAY_SECOND FROM "225 10:11:12")
-225101112
+8385959
+Warnings:
+Warning	1292	Truncated incorrect time value: '225 10:11:12'
 select extract(HOUR FROM "1999-01-02 10:11:12");
 extract(HOUR FROM "1999-01-02 10:11:12")
 10
@@ -612,7 +614,7 @@ date_add(date,INTERVAL "1 1:1:1" DAY_SECOND)
 2003-01-03 01:01:01
 select date_add(date,INTERVAL "1" WEEK) from t1;
 date_add(date,INTERVAL "1" WEEK)
-2003-01-09 00:00:00
+2003-01-09
 select date_add(date,INTERVAL "1" QUARTER) from t1;
 date_add(date,INTERVAL "1" QUARTER)
 2003-04-02
@@ -621,7 +623,7 @@ timestampadd(MINUTE, 1, date)
 2003-01-02 00:01:00
 select timestampadd(WEEK, 1, date) from t1;
 timestampadd(WEEK, 1, date)
-2003-01-09 00:00:00
+2003-01-09
 select timestampadd(SQL_TSI_SECOND, 1, date) from t1;
 timestampadd(SQL_TSI_SECOND, 1, date)
 2003-01-02 00:00:01
@@ -902,6 +904,93 @@ fmtddate	field2
 Sep-4 12:00AM	abcd
 DROP TABLE testBug8868;
 SET NAMES DEFAULT;
+SELECT SEC_TO_TIME(3300000);
+SEC_TO_TIME(3300000)
+838:59:59
+Warnings:
+Warning	1292	Truncated incorrect time value: '3300000'
+SELECT SEC_TO_TIME(3300000)+0;
+SEC_TO_TIME(3300000)+0
+8385959.000000
+Warnings:
+Warning	1292	Truncated incorrect time value: '3300000'
+SELECT SEC_TO_TIME(3600 * 4294967296);
+SEC_TO_TIME(3600 * 4294967296)
+838:59:59
+Warnings:
+Warning	1292	Truncated incorrect time value: '15461882265600'
+SELECT TIME_TO_SEC('916:40:00');
+TIME_TO_SEC('916:40:00')
+3020399
+Warnings:
+Warning	1292	Truncated incorrect time value: '916:40:00'
+SELECT ADDTIME('500:00:00', '416:40:00');
+ADDTIME('500:00:00', '416:40:00')
+838:59:59
+Warnings:
+Warning	1292	Truncated incorrect time value: '916:40:00'
+SELECT ADDTIME('916:40:00', '416:40:00');
+ADDTIME('916:40:00', '416:40:00')
+838:59:59
+Warnings:
+Warning	1292	Truncated incorrect time value: '916:40:00'
+Warning	1292	Truncated incorrect time value: '1255:39:59'
+SELECT SUBTIME('916:40:00', '416:40:00');
+SUBTIME('916:40:00', '416:40:00')
+422:19:59
+Warnings:
+Warning	1292	Truncated incorrect time value: '916:40:00'
+SELECT SUBTIME('-916:40:00', '416:40:00');
+SUBTIME('-916:40:00', '416:40:00')
+-838:59:59
+Warnings:
+Warning	1292	Truncated incorrect time value: '-916:40:00'
+Warning	1292	Truncated incorrect time value: '-1255:39:59'
+SELECT MAKETIME(916,0,0);
+MAKETIME(916,0,0)
+838:59:59
+Warnings:
+Warning	1292	Truncated incorrect time value: '916:00:00'
+SELECT MAKETIME(4294967296, 0, 0);
+MAKETIME(4294967296, 0, 0)
+838:59:59
+Warnings:
+Warning	1292	Truncated incorrect time value: '4294967296:00:00'
+SELECT MAKETIME(-4294967296, 0, 0);
+MAKETIME(-4294967296, 0, 0)
+-838:59:59
+Warnings:
+Warning	1292	Truncated incorrect time value: '-4294967296:00:00'
+SELECT MAKETIME(0, 4294967296, 0);
+MAKETIME(0, 4294967296, 0)
+NULL
+SELECT MAKETIME(0, 0, 4294967296);
+MAKETIME(0, 0, 4294967296)
+NULL
+SELECT MAKETIME(CAST(-1 AS UNSIGNED), 0, 0);
+MAKETIME(CAST(-1 AS UNSIGNED), 0, 0)
+838:59:59
+Warnings:
+Warning	1292	Truncated incorrect time value: '18446744073709551615:00:00'
+SELECT EXTRACT(HOUR FROM '100000:02:03');
+EXTRACT(HOUR FROM '100000:02:03')
+838
+Warnings:
+Warning	1292	Truncated incorrect time value: '100000:02:03'
+CREATE TABLE t1(f1 TIME);
+INSERT INTO t1 VALUES('916:00:00 a');
+Warnings:
+Warning	1265	Data truncated for column 'f1' at row 1
+Warning	1264	Out of range value adjusted for column 'f1' at row 1
+SELECT * FROM t1;
+f1
+838:59:59
+DROP TABLE t1;
+SELECT SEC_TO_TIME(CAST(-1 AS UNSIGNED));
+SEC_TO_TIME(CAST(-1 AS UNSIGNED))
+838:59:59
+Warnings:
+Warning	1292	Truncated incorrect time value: '18446744073709551615'
 (select time_format(timediff(now(), DATE_SUB(now(),INTERVAL 5 DAY)),'%H') As H)
 union
 (select time_format(timediff(now(), DATE_SUB(now(),INTERVAL 5 DAY)),'%H') As H);

mysql-test/r/grant2.result

@@ -336,12 +336,12 @@ drop database mysqltest_1;
 set password = password("changed");
 ERROR 42000: Access denied for user ''@'localhost' to database 'mysql'
 lock table mysql.user write;
- flush privileges;
- grant all on *.* to 'mysqltest_1'@'localhost';
+flush privileges;
+grant all on *.* to 'mysqltest_1'@'localhost';
 unlock tables;
 lock table mysql.user write;
- set password for 'mysqltest_1'@'localhost' = password('');
- revoke all on *.* from 'mysqltest_1'@'localhost';
+set password for 'mysqltest_1'@'localhost' = password('');
+revoke all on *.* from 'mysqltest_1'@'localhost';
 unlock tables;
 drop user 'mysqltest_1'@'localhost';
 create database TESTDB;

mysql-test/r/handler_innodb.result

@@ -476,7 +476,7 @@ handler t1 read first;
 c1
 1
 send the below to another connection, do not wait for the result
- optimize table t1;
+optimize table t1;
 proceed with the normal connection
 handler t1 read next;
 c1
@@ -502,7 +502,7 @@ flush tables with read lock;
 drop table t1;
 ERROR HY000: Can't execute the query because you have a conflicting read lock
 send the below to another connection, do not wait for the result
- drop table t1;
+drop table t1;
 proceed with the normal connection
 select * from t1;
 c1

mysql-test/r/handler_myisam.result

@@ -476,7 +476,7 @@ handler t1 read first;
 c1
 1
 send the below to another connection, do not wait for the result
- optimize table t1;
+optimize table t1;
 proceed with the normal connection
 handler t1 read next;
 c1
@@ -502,7 +502,7 @@ flush tables with read lock;
 drop table t1;
 ERROR HY000: Can't execute the query because you have a conflicting read lock
 send the below to another connection, do not wait for the result
- drop table t1;
+drop table t1;
 proceed with the normal connection
 select * from t1;
 c1

mysql-test/r/innodb_notembedded.result

@@ -10,7 +10,7 @@ start transaction;
 select f1();
 f1()
 100
- update t1 set col2=0 where col1=1;
+update t1 set col2=0 where col1=1;
 select * from t1;
 col1	col2
 1	100

mysql-test/r/kill.result

@@ -22,7 +22,7 @@ create table t2 (id int unsigned not null);
 insert into t2 select id from t1;
 create table t3 (kill_id int);
 insert into t3 values(connection_id());
- select id from t1 where id in (select distinct id from t2);
+select id from t1 where id in (select distinct id from t2);
 select ((@id := kill_id) - kill_id) from t3;
 ((@id := kill_id) - kill_id)
 0
@@ -32,7 +32,7 @@ drop table t1, t2, t3;
 select get_lock("a", 10);
 get_lock("a", 10)
 1
- select get_lock("a", 10);
+select get_lock("a", 10);
 get_lock("a", 10)
 NULL
 select 1;

mysql-test/r/lock_multi.result

@@ -2,8 +2,8 @@ drop table if exists t1,t2;
 create table t1(n int);
 insert into t1 values (1);
 lock tables t1 write;
- update low_priority t1 set n = 4;
- select n from t1;
+update low_priority t1 set n = 4;
+select n from t1;
 unlock tables;
 n
 4
@@ -11,8 +11,8 @@ drop table t1;
 create table t1(n int);
 insert into t1 values (1);
 lock tables t1 read;
- update low_priority t1 set n = 4;
- select n from t1;
+update low_priority t1 set n = 4;
+select n from t1;
 unlock tables;
 n
 1
@@ -23,7 +23,7 @@ insert into t1 values(1,1);
 insert into t1 values(2,2);
 insert into t2 values(1,2);
 lock table t1 read;
- update t1,t2 set c=a where b=d;
+update t1,t2 set c=a where b=d;
 select c from t2;
 c
 2
@@ -32,14 +32,14 @@ drop table t2;
 create table t1 (a int);
 create table t2 (a int);
 lock table t1 write, t2 write;
- insert t1 select * from t2;
+insert t1 select * from t2;
 drop table t2;
 ERROR 42S02: Table 'test.t2' doesn't exist
 drop table t1;
 create table t1 (a int);
 create table t2 (a int);
 lock table t1 write, t2 write, t1 as t1_2 write, t2 as t2_2 write;
- insert t1 select * from t2;
+insert t1 select * from t2;
 drop table t2;
 ERROR 42S02: Table 'test.t2' doesn't exist
 drop table t1;
@@ -54,7 +54,7 @@ use mysql;
 LOCK TABLES columns_priv WRITE, db WRITE, host WRITE, user WRITE;
 FLUSH TABLES;
 use mysql;
- SELECT user.Select_priv FROM user, db WHERE user.user = db.user LIMIT 1;
+SELECT user.Select_priv FROM user, db WHERE user.user = db.user LIMIT 1;
 OPTIMIZE TABLES columns_priv, db, host, user;
 Table	Op	Msg_type	Msg_text
 mysql.columns_priv	optimize	status	OK
@@ -68,14 +68,14 @@ use test;
 use test;
 CREATE TABLE t1 (c1 int);
 LOCK TABLE t1 WRITE;
- FLUSH TABLES WITH READ LOCK;
+FLUSH TABLES WITH READ LOCK;
 CREATE TABLE t2 (c1 int);
 UNLOCK TABLES;
 UNLOCK TABLES;
 DROP TABLE t1, t2;
 CREATE TABLE t1 (c1 int);
 LOCK TABLE t1 WRITE;
- FLUSH TABLES WITH READ LOCK;
+FLUSH TABLES WITH READ LOCK;
 CREATE TABLE t2 AS SELECT * FROM t1;
 ERROR HY000: Table 't2' was not locked with LOCK TABLES
 UNLOCK TABLES;
@@ -83,7 +83,7 @@ UNLOCK TABLES;
 DROP TABLE t1;
 CREATE DATABASE mysqltest_1;
 FLUSH TABLES WITH READ LOCK;
- DROP DATABASE mysqltest_1;
+DROP DATABASE mysqltest_1;
 DROP DATABASE mysqltest_1;
 ERROR HY000: Can't execute the query because you have a conflicting read lock
 UNLOCK TABLES;
@@ -91,7 +91,7 @@ DROP DATABASE mysqltest_1;
 ERROR HY000: Can't drop database 'mysqltest_1'; database doesn't exist
 create table t1 (f1 int(12) unsigned not null auto_increment, primary key(f1)) engine=innodb;
 lock tables t1 write;
- alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; //
- alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; //
+alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; //
+alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; //
 unlock tables;
 drop table t1;

mysql-test/r/log_tables.result

@@ -39,14 +39,14 @@ ERROR HY000: You can't use usual read lock with log tables. Try READ LOCAL inste
 lock tables mysql.slow_log READ LOCAL, mysql.general_log READ LOCAL;
 unlock tables;
 lock tables mysql.general_log READ LOCAL;
- flush logs;
+flush logs;
 unlock tables;
 select "Mark that we woke up from flush logs in the test"
        as "test passed";
 test passed
 Mark that we woke up from flush logs in the test
 lock tables mysql.general_log READ LOCAL;
- truncate mysql.general_log;
+truncate mysql.general_log;
 unlock tables;
 select "Mark that we woke up from TRUNCATE in the test"
        as "test passed";

mysql-test/r/multi_update.result

@@ -509,8 +509,8 @@ create table t2 (a int);
 insert into t2 values (10), (20), (30);
 create view v1 as select a as b, a/10 as a from t2;
 lock table t1 write;
- alter table t1 add column c int default 100 after a;
- update t1, v1 set t1.b=t1.a+t1.b+v1.b where t1.a=v1.a;
+alter table t1 add column c int default 100 after a;
+update t1, v1 set t1.b=t1.a+t1.b+v1.b where t1.a=v1.a;
 unlock tables;
 select * from t1;
 a	c	b

mysql-test/r/mysql.result

@@ -149,4 +149,17 @@ ERROR at line 1: USE must be followed by a database name
 \\
 ';
 ';
+create table t17583 (a int);
+insert into t17583 (a) values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
+insert into t17583 select a from t17583;
+insert into t17583 select a from t17583;
+insert into t17583 select a from t17583;
+insert into t17583 select a from t17583;
+insert into t17583 select a from t17583;
+insert into t17583 select a from t17583;
+insert into t17583 select a from t17583;
+select count(*) from t17583;
+count(*)
+1280
+drop table t17583;
 End of 5.0 tests

mysql-test/r/mysqltest.result

@@ -152,8 +152,38 @@ mysqltest: At line 1: Missing delimiter
 mysqltest: At line 1: End of line junk detected: "sleep 7
 # Another comment
 "
+mysqltest: At line 1: Missing delimiter
+mysqltest: At line 1: Missing delimiter
+mysqltest: At line 1: End of line junk detected: "disconnect default
+
+#
+# comment
+# comment2
+
+# comment 3
+--disable_query_log
+"
+mysqltest: At line 1: End of line junk detected: "disconnect default # comment
+# comment part2
+
+# comment 3
+--disable_query_log
+"
 mysqltest: At line 1: Extra delimiter ";" found
 mysqltest: At line 1: Extra delimiter ";" found
+mysqltest: At line 1: Missing argument(s) to 'error'
+mysqltest: At line 1: Missing argument(s) to 'error'
+mysqltest: At line 1: The sqlstate definition must start with an uppercase S
+mysqltest: At line 1: The error name definition must start with an uppercase E
+mysqltest: At line 1: Invalid argument to error: '9eeeee' - the errno may only consist of digits[0-9]
+mysqltest: At line 1: Invalid argument to error: '1sssss' - the errno may only consist of digits[0-9]
+mysqltest: At line 1: The sqlstate must be exactly 5 chars long
+mysqltest: At line 1: The sqlstate may only consist of digits[0-9] and _uppercase_ letters
+mysqltest: At line 1: The sqlstate must be exactly 5 chars long
+mysqltest: At line 1: Unknown SQL error name 'E9999'
+mysqltest: At line 1: Invalid argument to error: '999e9' - the errno may only consist of digits[0-9]
+mysqltest: At line 1: Invalid argument to error: '9b' - the errno may only consist of digits[0-9]
+mysqltest: At line 1: Too many errorcodes specified
 MySQL
 "MySQL"
 MySQL: The world''s most popular open source database
@@ -239,7 +269,7 @@ mysqltest: At line 1: Missing assignment operator in let
 1
 # Execute: echo $success ;
 1 
-mysqltest: At line 1: Missing file name in source
+mysqltest: At line 1: Missing required argument 'filename' to command 'source'
 mysqltest: At line 1: Could not open file ./non_existingFile
 mysqltest: In included file "MYSQLTEST_VARDIR/tmp/recursive.sql": At line 1: Source directives are nesting too deep
 mysqltest: In included file "MYSQLTEST_VARDIR/tmp/error.sql": At line 1: query 'garbage ' failed: 1064: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'garbage' at line 1
@@ -332,16 +362,16 @@ Counter is greater than 0, (counter=10)
 Counter is not 0, (counter=0)
 1
 Testing while with not
-mysqltest: In included file "./include/mysqltest_while.inc": At line 64: Nesting too deeply
+mysqltest: In included file "MYSQLTEST_VARDIR/tmp/mysqltest_while.inc": At line 64: Nesting too deeply
 mysqltest: At line 1: missing '(' in while
 mysqltest: At line 1: missing ')' in while
 mysqltest: At line 1: Missing '{' after while. Found "dec $i"
 mysqltest: At line 1: Stray '}' - end of block before beginning
 mysqltest: At line 1: Stray 'end' command - end of block before beginning
-mysqltest: At line 1: query '' failed: 1065: Query was empty
+mysqltest: At line 1: query '{' failed: 1064: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '{' at line 1
 mysqltest: At line 1: Missing '{' after while. Found "echo hej"
 mysqltest: At line 3: Missing end of block
-mysqltest: At line 1: Missing newline between while and '{'
+mysqltest: At line 3: Missing end of block
 mysqltest: At line 1: missing '(' in if
 mysqltest: At line 1: Stray 'end' command - end of block before beginning
 select "b" bs col1, "c" bs col2;
@@ -371,17 +401,15 @@ mysqltest: At line 1: Wrong column number to replace_column in 'replace_column 1
 mysqltest: At line 1: Invalid integer argument "10!"
 mysqltest: At line 1: End of line junk detected: "!"
 mysqltest: At line 1: Invalid integer argument "a"
-mysqltest: At line 1: Syntax error in connect - expected '(' found 'mysqltest: At line 1: Missing connection host
-mysqltest: At line 1: Missing connection host
-mysqltest: At line 1: Missing connection user
-mysqltest: At line 1: Missing connection user
-mysqltest: At line 1: Missing connection password
-mysqltest: At line 1: Missing connection db
-mysqltest: At line 1: Could not open connection 'con2': 1049 Unknown database 'illegal_db'
+mysqltest: At line 1: Missing required argument 'connection name' to command 'connect'
+mysqltest: At line 1: Missing required argument 'connection name' to command 'connect'
+mysqltest: At line 1: Missing required argument 'host' to command 'connect'
+mysqltest: At line 1: Missing required argument 'host' to command 'connect'
+mysqltest: At line 1: query 'connect  con2,localhost,root,,illegal_db' failed: 1049: Unknown database 'illegal_db'
 mysqltest: At line 1: Illegal argument for port: 'illegal_port'
 mysqltest: At line 1: Illegal option to connect: SMTP
 OK
-mysqltest: In included file "MYSQLTEST_VARDIR/tmp/mysqltest.sql": At line 7: Connection limit exhausted - increase MAX_CONS in mysqltest.c
+mysqltest: In included file "MYSQLTEST_VARDIR/tmp/mysqltest.sql": At line 7: Connection limit exhausted, you can have max 128 connections
 mysqltest: In included file "MYSQLTEST_VARDIR/tmp/mysqltest.sql": At line 3: connection 'test_con1' not found in connection pool
 mysqltest: In included file "MYSQLTEST_VARDIR/tmp/mysqltest.sql": At line 2: Connection test_con1 already exists
 connect(localhost,root,,test,MASTER_PORT,MASTER_SOCKET);
@@ -449,7 +477,6 @@ sleep;
 ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'sleep' at line 1
 ;
 ERROR 42000: Query was empty
-End of 5.0 tests
 select "b" as col1, "c" as col2;
 col1	col2
 b	c
@@ -477,4 +504,18 @@ a	D
 1	1
 1	4
 drop table t1;
-End of 5.1 tests
+mysqltest: At line 1: Missing required argument 'filename' to command 'remove_file'
+mysqltest: At line 1: Missing required argument 'filename' to command 'write_file'
+mysqltest: At line 1: End of file encountered before 'EOF' delimiter was found
+mysqltest: At line 1: End of line junk detected: "write_file filename ";
+"
+mysqltest: At line 1: Missing required argument 'filename' to command 'file_exists'
+mysqltest: At line 1: Missing required argument 'from_file' to command 'copy_file'
+mysqltest: At line 1: Missing required argument 'to_file' to command 'copy_file'
+hello
+hello
+hello
+mysqltest: At line 1: Max delimiter length(16) exceeded
+hello
+hello
+End of tests

mysql-test/r/partition.result

@@ -1090,41 +1090,15 @@ drop table t1;
 create table t1 (a int) engine myisam
 partition by range (a)
 subpartition by hash (a)
-(partition p0 VALUES LESS THAN (1) DATA DIRECTORY = 'hello/master-data/tmpdata' INDEX DIRECTORY = 'hello/master-data/tmpinx'
+(partition p0 VALUES LESS THAN (1) DATA DIRECTORY = 'MYSQLTEST_VARDIR/master-data/tmpdata' INDEX DIRECTORY = 'MYSQLTEST_VARDIR/master-data/tmpinx'
 (SUBPARTITION subpart00, SUBPARTITION subpart01));
-hello/master-data/test/t1.frm
-hello/master-data/test/t1.par
-hello/master-data/test/t1#P#p0#SP#subpart00.MYD
-hello/master-data/test/t1#P#p0#SP#subpart00.MYI
-hello/master-data/test/t1#P#p0#SP#subpart01.MYD
-hello/master-data/test/t1#P#p0#SP#subpart01.MYI
-hello/master-data/tmpdata/t1#P#p0#SP#subpart00.MYD
-hello/master-data/tmpdata/t1#P#p0#SP#subpart01.MYD
-hello/master-data/tmpinx/t1#P#p0#SP#subpart00.MYI
-hello/master-data/tmpinx/t1#P#p0#SP#subpart01.MYI
+Checking if file exists before alter
 ALTER TABLE t1 REORGANIZE PARTITION p0 INTO
-(partition p1 VALUES LESS THAN (1) DATA DIRECTORY = 'hello/master-data/tmpdata' INDEX DIRECTORY = 'hello/master-data/tmpinx'
+(partition p1 VALUES LESS THAN (1) DATA DIRECTORY = 'MYSQLTEST_VARDIR/master-data/tmpdata' INDEX DIRECTORY = 'MYSQLTEST_VARDIR/master-data/tmpinx'
 (SUBPARTITION subpart10, SUBPARTITION subpart11),
-partition p2 VALUES LESS THAN (2) DATA DIRECTORY = 'hello/master-data/tmpdata' INDEX DIRECTORY = 'hello/master-data/tmpinx'
+partition p2 VALUES LESS THAN (2) DATA DIRECTORY = 'MYSQLTEST_VARDIR/master-data/tmpdata' INDEX DIRECTORY = 'MYSQLTEST_VARDIR/master-data/tmpinx'
 (SUBPARTITION subpart20, SUBPARTITION subpart21));
-hello/master-data/test/t1.frm
-hello/master-data/test/t1.par
-hello/master-data/test/t1#P#p1#SP#subpart10.MYD
-hello/master-data/test/t1#P#p1#SP#subpart10.MYI
-hello/master-data/test/t1#P#p1#SP#subpart11.MYD
-hello/master-data/test/t1#P#p1#SP#subpart11.MYI
-hello/master-data/test/t1#P#p2#SP#subpart20.MYD
-hello/master-data/test/t1#P#p2#SP#subpart20.MYI
-hello/master-data/test/t1#P#p2#SP#subpart21.MYD
-hello/master-data/test/t1#P#p2#SP#subpart21.MYI
-hello/master-data/tmpdata/t1#P#p1#SP#subpart10.MYD
-hello/master-data/tmpdata/t1#P#p1#SP#subpart11.MYD
-hello/master-data/tmpdata/t1#P#p2#SP#subpart20.MYD
-hello/master-data/tmpdata/t1#P#p2#SP#subpart21.MYD
-hello/master-data/tmpinx/t1#P#p1#SP#subpart10.MYI
-hello/master-data/tmpinx/t1#P#p1#SP#subpart11.MYI
-hello/master-data/tmpinx/t1#P#p2#SP#subpart20.MYI
-hello/master-data/tmpinx/t1#P#p2#SP#subpart21.MYI
+Checking if file exists after alter
 drop table t1;
 create table t1 (a bigint unsigned not null, primary key(a))
 engine = myisam

mysql-test/r/ps_11bugs.result

@@ -130,3 +130,36 @@ prepare st_18492 from 'select * from t1 where 3 in (select (1+1) union select 1)
 execute st_18492;
 a
 drop table t1;
+create table t1 (a int, b varchar(4));
+create table t2 (a int, b varchar(4), primary key(a));
+prepare stmt1 from 'insert into t1 (a, b) values (?, ?)';
+prepare stmt2 from 'insert into t2 (a, b) values (?, ?)';
+set @intarg= 11;
+set @varchararg= '2222';
+execute stmt1 using @intarg, @varchararg;
+execute stmt2 using @intarg, @varchararg;
+set @intarg= 12;
+execute stmt1 using @intarg, @UNDEFINED;
+execute stmt2 using @intarg, @UNDEFINED;
+set @intarg= 13;
+execute stmt1 using @UNDEFINED, @varchararg;
+execute stmt2 using @UNDEFINED, @varchararg;
+ERROR 23000: Column 'a' cannot be null
+set @intarg= 14;
+set @nullarg= Null;
+execute stmt1 using @UNDEFINED, @nullarg;
+execute stmt2 using @nullarg, @varchararg;
+ERROR 23000: Column 'a' cannot be null
+select * from t1;
+a	b
+11	2222
+12	NULL
+NULL	2222
+NULL	NULL
+select * from t2;
+a	b
+11	2222
+12	NULL
+drop table t1;
+drop table t2;
+End of 5.0 tests.

mysql-test/r/query_cache_notembedded.result

@@ -326,7 +326,7 @@ insert into t1 values(3);
 set i_var = sleep(3);
 return 0;
 end;|
- select f1();
+select f1();
 select sleep(4);
 sleep(4)
 0

mysql-test/r/rename.result

@@ -43,7 +43,7 @@ Note	1051	Unknown table 't4'
 CREATE TABLE t1 (a int);
 CREATE TABLE t3 (a int);
 FLUSH TABLES WITH READ LOCK;
- RENAME TABLE t1 TO t2, t3 to t4;
+RENAME TABLE t1 TO t2, t3 to t4;
 show tables;
 Tables_in_test
 t1

mysql-test/r/rpl_err_ignoredtable.result

@@ -26,7 +26,7 @@ create table t2 (a int primary key);
 insert into t2 values(1);
 create table t3 (id int);
 insert into t3 values(connection_id());
- update t2 set a = a + 1 + get_lock('crash_lock%20C', 10);
+update t2 set a = a + 1 + get_lock('crash_lock%20C', 10);
 select (@id := id) - id from t3;
 (@id := id) - id
 0

mysql-test/r/rpl_master_pos_wait.result

@@ -12,7 +12,7 @@ id	select_type	table	type	possible_keys	key	key_len	ref	rows	filtered	Extra
 1	SIMPLE	NULL	NULL	NULL	NULL	NULL	NULL	NULL	NULL	No tables used
 Warnings:
 Note	1003	select master_pos_wait(_latin1'master-bin.999999',0,2) AS `master_pos_wait('master-bin.999999',0,2)`
- select master_pos_wait('master-bin.999999',0);
+select master_pos_wait('master-bin.999999',0);
 stop slave sql_thread;
 master_pos_wait('master-bin.999999',0)
 NULL

mysql-test/r/rpl_ndb_sp003.result

@@ -21,7 +21,7 @@ END|
 SELECT get_lock("test", 200);
 get_lock("test", 200)
 1
- CALL test.p1();
+CALL test.p1();
 CALL test.p2();
 SELECT release_lock("test");
 release_lock("test")

mysql-test/r/rpl_row_sp003.result

@@ -21,7 +21,7 @@ END|
 SELECT get_lock("test", 200);
 get_lock("test", 200)
 1
- CALL test.p1();
+CALL test.p1();
 CALL test.p2();
 SELECT release_lock("test");
 release_lock("test")

mysql-test/r/rpl_stm_000001.result

@@ -44,7 +44,7 @@ create table t2(id int);
 insert into t2 values(connection_id());
 create temporary table t3(n int);
 insert into t3 select get_lock('crash_lock%20C', 1) from t2;
- update t1 set n = n + get_lock('crash_lock%20C', 2);
+update t1 set n = n + get_lock('crash_lock%20C', 2);
 select (@id := id) - id from t2;
 (@id := id) - id
 0

mysql-test/r/show_check.result

@@ -672,7 +672,22 @@ SHOW TABLES FROM no_such_database;
 ERROR 42000: Unknown database 'no_such_database'
 SHOW COLUMNS FROM no_such_table;
 ERROR 42S02: Table 'test.no_such_table' doesn't exist
-End of 5.0 tests.
+flush status;
+show status like 'slow_queries';
+Variable_name  Value
+Slow_queries 0
+show tables;
+Tables_in_test
+show status like 'slow_queries';
+Variable_name  Value
+Slow_queries 0
+select 1 from information_schema.tables limit 1;
+1
+1
+show status like 'slow_queries';
+Variable_name  Value
+Slow_queries 1
+End of 5.0 tests
 SHOW AUTHORS;
 create database mysqltest;
 show create database mysqltest;

mysql-test/r/sp-threads.result

@@ -31,7 +31,7 @@ create procedure bug9486()
 update t1, t2 set val= 1 where id1=id2;
 call bug9486();
 lock tables t2 write;
- call bug9486();
+call bug9486();
 show processlist;
 Id	User	Host	db	Command	Time	State	Info
 #	root	localhost	test	Sleep	#		NULL
@@ -77,7 +77,7 @@ select * from t1;
 end|
 use test;
 lock table t1 write;
- call p2();
+call p2();
 use test;
 drop procedure p1;
 create procedure p1() select * from t1;

mysql-test/r/sp_notembedded.result

@@ -74,8 +74,7 @@ flush status|
 flush query cache|
 delete from t1|
 drop procedure bug3583|
-drop table t1;
-#|
+drop table t1|
 drop procedure if exists bug6807|
 create procedure bug6807()
 begin

mysql-test/r/subselect.result

@@ -2717,8 +2717,7 @@ select (1,2,3) = (select * from t1);
 ERROR 21000: Operand should contain 3 column(s)
 select (select * from t1) = (1,2,3);
 ERROR 21000: Operand should contain 2 column(s)
-drop table t1
-#;
+drop table t1;
 CREATE TABLE `t1` (
 `itemid` bigint(20) unsigned NOT NULL auto_increment,
 `sessionid` bigint(20) unsigned default NULL,

mysql-test/r/synchronization.result

 drop table if exists t1;
 CREATE TABLE t1 (x1 int);
- ALTER TABLE t1 CHANGE x1 x2 int;
+ALTER TABLE t1 CHANGE x1 x2 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -8,7 +8,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x2 x1 int;
+ALTER TABLE t1 CHANGE x2 x1 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -16,7 +16,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x1 x2 int;
+ALTER TABLE t1 CHANGE x1 x2 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -24,7 +24,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x2 x1 int;
+ALTER TABLE t1 CHANGE x2 x1 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -32,7 +32,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x1 x2 int;
+ALTER TABLE t1 CHANGE x1 x2 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -40,7 +40,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x2 x1 int;
+ALTER TABLE t1 CHANGE x2 x1 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -48,7 +48,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x1 x2 int;
+ALTER TABLE t1 CHANGE x1 x2 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -56,7 +56,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x2 x1 int;
+ALTER TABLE t1 CHANGE x2 x1 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -64,7 +64,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x1 x2 int;
+ALTER TABLE t1 CHANGE x1 x2 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -72,7 +72,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x2 x1 int;
+ALTER TABLE t1 CHANGE x2 x1 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -80,7 +80,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x1 x2 int;
+ALTER TABLE t1 CHANGE x1 x2 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -88,7 +88,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x2 x1 int;
+ALTER TABLE t1 CHANGE x2 x1 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -96,7 +96,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x1 x2 int;
+ALTER TABLE t1 CHANGE x1 x2 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -104,7 +104,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x2 x1 int;
+ALTER TABLE t1 CHANGE x2 x1 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -112,7 +112,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x1 x2 int;
+ALTER TABLE t1 CHANGE x1 x2 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -120,7 +120,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x2 x1 int;
+ALTER TABLE t1 CHANGE x2 x1 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -128,7 +128,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x1 x2 int;
+ALTER TABLE t1 CHANGE x1 x2 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -136,7 +136,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x2 x1 int;
+ALTER TABLE t1 CHANGE x2 x1 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -144,7 +144,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x1 x2 int;
+ALTER TABLE t1 CHANGE x1 x2 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table
@@ -152,7 +152,7 @@ t2	CREATE TABLE `t2` (
   `xx` int(11) DEFAULT NULL
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 DROP TABLE t2;
- ALTER TABLE t1 CHANGE x2 x1 int;
+ALTER TABLE t1 CHANGE x2 x1 int;
 CREATE TABLE t2 LIKE t1;
 SHOW CREATE TABLE t2;
 Table	Create Table

mysql-test/r/user_var.result

@@ -215,6 +215,7 @@ select @@version;
 select @@global.version;
 @@global.version
 #
+End of 4.1 tests
 set @first_var= NULL;
 create table t1 select @first_var;
 show create table t1;
@@ -301,3 +302,11 @@ select @var;
 @var
 3
 drop table t1;
+insert into city 'blah';
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ''blah'' at line 1
+SHOW COUNT(*) WARNINGS;
+@@session.warning_count
+1
+SHOW COUNT(*) ERRORS;
+@@session.error_count
+1

mysql-test/t/connect.test

@@ -59,6 +59,7 @@ flush privileges;
 
 connect (con10,localhost,test,gambling2,);
 connect (con5,localhost,test,gambling2,mysql);
+connection con5;
 set password="";
 --error 1372
 set password='gambling3';

mysql-test/t/crash_commit_before.test

@@ -20,6 +20,9 @@ SET SESSION debug="d,crash_commit_before";
 --error 2013
 COMMIT;
 
+# Turn on reconnect
+--enable_reconnect
+
 # Call script that will poll the server waiting for it to be back online again
 --source include/wait_until_connected_again.inc
 

mysql-test/t/csv.test

@@ -1295,7 +1295,7 @@ SELECT fld3 FROM t2;
 #
 
 DROP TABLE t1;
-ALTER TABLE t2 RENAME t1
+ALTER TABLE t2 RENAME t1;
 
 #
 # Drop and recreate

mysql-test/t/disabled.def

@@ -9,29 +9,18 @@
 #  Do not use any TAB characters for whitespace.
 #
 ##############################################################################
-#events_bugs              : BUG#17619 2006-02-21 andrey  Race conditions
-#events_stress            : BUG#17619 2006-02-21 andrey  Race conditions
-#events                   : BUG#17619 2006-02-21 andrey  Race conditions
-#events_scheduling        : BUG#19170 2006-04-26 andrey  Test case of 19170 fails on some platforms. Has to be checked.
 im_options                : Bug#20294 2006-07-24 stewart   Instance manager test im_options fails randomly
-#im_life_cycle             : Bug#20368 2006-06-10 alik    im_life_cycle test fails
-im_daemon_life_cycle     : BUG#22379 2006-09-15 ingo    im_daemon_life_cycle.test fails on merge of 5.1 -> 5.1-engines
-im_instance_conf         : BUG#20294 2006-09-16 ingo    Instance manager test im_instance_conf fails randomly
 concurrent_innodb        : BUG#21579 2006-08-11 mleich innodb_concurrent random failures with varying differences
 ndb_autodiscover         : BUG#18952 2006-02-16 jmiller Needs to be fixed w.r.t binlog
 ndb_autodiscover2        : BUG#18952 2006-02-16 jmiller Needs to be fixed w.r.t binlog
-#ndb_binlog_ignore_db     : BUG#21279 2006-07-25 ingo    Randomly throws a warning
 ndb_load                 : BUG#17233 2006-05-04 tomas failed load data from infile causes mysqld dbug_assert, binlog not flushed
 partition_03ndb          : BUG#16385 2006-03-24 mikael Partitions: crash when updating a range partitioned NDB table
-ps                       : BUG#21524 2006-08-08 pgalbraith 'ps' test fails in --ps-protocol test AMD64 bit
 ps_7ndb                  : BUG#18950 2006-02-16 jmiller create table like does not obtain LOCK_open
 rpl_ndb_2innodb          : BUG#19227 2006-04-20 pekka pk delete apparently not replicated
 rpl_ndb_2myisam          : BUG#19227 Seems to pass currently
-#rpl_ndb_commit_afterflush : BUG#19328 2006-05-04 tomas Slave timeout with COM_REGISTER_SLAVE error causing stop
 rpl_ndb_dd_partitions    : BUG#19259 2006-04-21 rpl_ndb_dd_partitions fails on s/AMD
 rpl_ndb_ddl              : BUG#18946 result file needs update + test needs to checked
 rpl_ndb_innodb2ndb       : Bug #19710  Cluster replication to partition table fails on DELETE FROM statement
-#rpl_ndb_log              : BUG#18947 2006-03-21 tomas CRBR: order in binlog of create table and insert (on different table) not determ
 rpl_ndb_myisam2ndb       : Bug #19710  Cluster replication to partition table fails on DELETE FROM statement
 rpl_row_blob_innodb      : BUG#18980 2006-04-10 kent    Test fails randomly
 rpl_sp                   : BUG#16456 2006-02-16 jmiller
@@ -39,8 +28,5 @@ rpl_multi_engine         : BUG#22583 2006-09-23 lars
 
 # the below testcase have been reworked to avoid the bug, test contains comment, keep bug open
 #ndb_binlog_ddl_multi     : BUG#18976 2006-04-10 kent    CRBR: multiple binlog, second binlog may miss schema log events
-#rpl_ndb_idempotent       : BUG#21298 2006-07-27 msvensson
-#rpl_row_basic_7ndb       : BUG#21298 2006-07-27 msvensson
-#rpl_truncate_7ndb        : BUG#21298 2006-07-27 msvensson
 ndb_binlog_discover      : bug#21806 2006-08-24
 ndb_autodiscover3        : bug#21806

mysql-test/t/func_compress.test

@@ -56,7 +56,19 @@ insert into t1 values(NULL), (compress('a'));
 select uncompress(a), uncompressed_length(a) from t1;
 drop table t1;
 
-# End of 4.1 tests
+#
+# Bug #23254: problem with compress(NULL)
+#
+
+create table t1(a blob);
+insert into t1 values ('0'), (NULL), ('0');
+--disable_result_log
+select compress(a), compress(a) from t1;
+--enable_result_log
+select compress(a) is null from t1;
+drop table t1;
+
+--echo End of 4.1 tests
 
 #
 # Bug #18539: uncompress(d) is null: impossible?

mysql-test/t/func_date_add.test

@@ -64,4 +64,17 @@ insert into t1 values (date_add('2000-01-04', INTERVAL NULL DAY));
 select * from t1;
 drop table t1;
 
-# End of 4.1 tests
+--echo End of 4.1 tests
+
+#
+# Bug#21811
+#
+# Make sure we end up with an appropriate
+# date format (DATE) after addition operation
+#
+SELECT CAST('2006-09-26' AS DATE) + INTERVAL 1 DAY;
+SELECT CAST('2006-09-26' AS DATE) + INTERVAL 1 MONTH;
+SELECT CAST('2006-09-26' AS DATE) + INTERVAL 1 YEAR;
+SELECT CAST('2006-09-26' AS DATE) + INTERVAL 1 WEEK;
+
+--echo End of 5.0 tests

mysql-test/t/func_time.test

@@ -466,6 +466,47 @@ SET NAMES DEFAULT;
 
 
 #
+# Bug #11655: Wrong time is returning from nested selects - maximum time exists
+#
+# check if SEC_TO_TIME() handles out-of-range values correctly
+SELECT SEC_TO_TIME(3300000);
+SELECT SEC_TO_TIME(3300000)+0;
+SELECT SEC_TO_TIME(3600 * 4294967296);
+
+# check if TIME_TO_SEC() handles out-of-range values correctly
+SELECT TIME_TO_SEC('916:40:00');
+
+# check if ADDTIME() handles out-of-range values correctly
+SELECT ADDTIME('500:00:00', '416:40:00');
+SELECT ADDTIME('916:40:00', '416:40:00');
+
+# check if SUBTIME() handles out-of-range values correctly
+SELECT SUBTIME('916:40:00', '416:40:00');
+SELECT SUBTIME('-916:40:00', '416:40:00');
+
+# check if MAKETIME() handles out-of-range values correctly
+SELECT MAKETIME(916,0,0);
+SELECT MAKETIME(4294967296, 0, 0);
+SELECT MAKETIME(-4294967296, 0, 0);
+SELECT MAKETIME(0, 4294967296, 0);
+SELECT MAKETIME(0, 0, 4294967296);
+SELECT MAKETIME(CAST(-1 AS UNSIGNED), 0, 0);
+
+# check if EXTRACT() handles out-of-range values correctly
+SELECT EXTRACT(HOUR FROM '100000:02:03');
+
+# check if we get proper warnings if both input string truncation
+# and out-of-range value occur
+CREATE TABLE t1(f1 TIME);
+INSERT INTO t1 VALUES('916:00:00 a');
+SELECT * FROM t1;
+DROP TABLE t1;
+
+#
+# Bug #20927: sec_to_time treats big unsigned as signed
+#
+# check if SEC_TO_TIME() handles BIGINT UNSIGNED values correctly
+SELECT SEC_TO_TIME(CAST(-1 AS UNSIGNED));
 # Bug #19844 time_format in Union truncates values
 #
 

mysql-test/t/im_daemon_life_cycle.imtest

@@ -8,6 +8,9 @@
 
 --source include/im_check_env.inc
 
+# Turn on reconnect, not on by default anymore
+--enable_reconnect
+
 ###########################################################################
 
 # Kill the IM main process and check that the IM Angel will restart the main

mysql-test/t/mysql.test

@@ -153,4 +153,21 @@ drop table t1;
 --exec echo "SELECT '\';';" >> $MYSQLTEST_VARDIR/tmp/bug20103.sql
 --exec $MYSQL              < $MYSQLTEST_VARDIR/tmp/bug20103.sql 2>&1
 
+#
+# Bug#17583: mysql drops connection when stdout is not writable
+#
+create table t17583 (a int);
+insert into t17583 (a) values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
+insert into t17583 select a from t17583;
+insert into t17583 select a from t17583;
+insert into t17583 select a from t17583;
+insert into t17583 select a from t17583;
+insert into t17583 select a from t17583;
+insert into t17583 select a from t17583;
+insert into t17583 select a from t17583;
+# Close to the minimal data needed to exercise bug.
+select count(*) from t17583;
+--exec echo "select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; select count(*) from t17583; " |$MYSQL test >&-
+drop table t17583;
+
 --echo End of 5.0 tests

mysql-test/t/not_embedded_server-master.opt

---loose-to-force-a-restart
+--force-restart

mysql-test/t/partition.test

@@ -4,6 +4,7 @@
 # Taken fromm the select test
 #
 -- source include/have_partition.inc
+-- source include/have_innodb.inc
 #
 # This test is disabled on Windows due to BUG#19107
 #
@@ -1286,37 +1287,51 @@ eval SET @inx_dir = 'INDEX DIRECTORY = ''$MYSQLTEST_VARDIR/master-data/tmpinx'''
 let $inx_directory = `select @inx_dir`;
 --enable_query_log
 
---replace_result $MYSQLTEST_VARDIR "hello"
+--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
 eval create table t1 (a int) engine myisam
 partition by range (a)
 subpartition by hash (a)
 (partition p0 VALUES LESS THAN (1) $data_directory $inx_directory
  (SUBPARTITION subpart00, SUBPARTITION subpart01));
 
---replace_result $MYSQLTEST_VARDIR "hello"
---exec ls $MYSQLTEST_VARDIR/master-data/test/t1.* || true
---replace_result $MYSQLTEST_VARDIR "hello"
---exec ls $MYSQLTEST_VARDIR/master-data/test/t1#* || true
---replace_result $MYSQLTEST_VARDIR "hello"
---exec ls $MYSQLTEST_VARDIR/master-data/tmpdata/t1#* || true
---replace_result $MYSQLTEST_VARDIR "hello"
---exec ls $MYSQLTEST_VARDIR/master-data/tmpinx/t1#* || true
---replace_result $MYSQLTEST_VARDIR "hello"
-
+--echo Checking if file exists before alter
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1.frm
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1.par
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p0#SP#subpart00.MYD
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p0#SP#subpart00.MYI
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p0#SP#subpart01.MYD
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p0#SP#subpart01.MYI
+--file_exists $MYSQLTEST_VARDIR/master-data/tmpdata/t1#P#p0#SP#subpart00.MYD
+--file_exists $MYSQLTEST_VARDIR/master-data/tmpdata/t1#P#p0#SP#subpart01.MYD
+--file_exists $MYSQLTEST_VARDIR/master-data/tmpinx/t1#P#p0#SP#subpart00.MYI
+--file_exists $MYSQLTEST_VARDIR/master-data/tmpinx/t1#P#p0#SP#subpart01.MYI
+
+--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
 eval ALTER TABLE t1 REORGANIZE PARTITION p0 INTO
 (partition p1 VALUES LESS THAN (1) $data_directory $inx_directory
  (SUBPARTITION subpart10, SUBPARTITION subpart11),
  partition p2 VALUES LESS THAN (2) $data_directory $inx_directory
  (SUBPARTITION subpart20, SUBPARTITION subpart21));
 
---replace_result $MYSQLTEST_VARDIR "hello"
---exec ls $MYSQLTEST_VARDIR/master-data/test/t1.* || true
---replace_result $MYSQLTEST_VARDIR "hello"
---exec ls $MYSQLTEST_VARDIR/master-data/test/t1#* || true
---replace_result $MYSQLTEST_VARDIR "hello"
---exec ls $MYSQLTEST_VARDIR/master-data/tmpdata/t1#* || true
---replace_result $MYSQLTEST_VARDIR "hello"
---exec ls $MYSQLTEST_VARDIR/master-data/tmpinx/t1#* || true
+--echo Checking if file exists after alter
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1.frm
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1.par
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p1#SP#subpart10.MYD
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p1#SP#subpart10.MYI
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p1#SP#subpart11.MYD
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p1#SP#subpart11.MYI
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p2#SP#subpart20.MYD
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p2#SP#subpart20.MYI
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p2#SP#subpart21.MYD
+--file_exists $MYSQLTEST_VARDIR/master-data/test/t1#P#p2#SP#subpart21.MYI
+--file_exists $MYSQLTEST_VARDIR/master-data/tmpdata/t1#P#p1#SP#subpart10.MYD
+--file_exists $MYSQLTEST_VARDIR/master-data/tmpdata/t1#P#p1#SP#subpart11.MYD
+--file_exists $MYSQLTEST_VARDIR/master-data/tmpdata/t1#P#p2#SP#subpart20.MYD
+--file_exists $MYSQLTEST_VARDIR/master-data/tmpdata/t1#P#p2#SP#subpart21.MYD
+--file_exists $MYSQLTEST_VARDIR/master-data/tmpinx/t1#P#p1#SP#subpart10.MYI
+--file_exists $MYSQLTEST_VARDIR/master-data/tmpinx/t1#P#p1#SP#subpart11.MYI
+--file_exists $MYSQLTEST_VARDIR/master-data/tmpinx/t1#P#p2#SP#subpart20.MYI
+--file_exists $MYSQLTEST_VARDIR/master-data/tmpinx/t1#P#p2#SP#subpart21.MYI
 
 drop table t1;
 --exec rmdir $MYSQLTEST_VARDIR/master-data/tmpdata || true

mysql-test/t/ps-master.opt

+--log-slow-queries --log-long-format --log-queries-not-using-indexes

mysql-test/t/ps_11bugs.test

@@ -144,3 +144,37 @@ prepare st_18492 from 'select * from t1 where 3 in (select (1+1) union select 1)
 execute st_18492;
 
 drop table t1;
+
+#
+# Bug#19356: Assertion failure with undefined @uservar in prepared statement execution
+# 
+create table t1 (a int, b varchar(4));
+create table t2 (a int, b varchar(4), primary key(a));
+
+prepare stmt1 from 'insert into t1 (a, b) values (?, ?)';
+prepare stmt2 from 'insert into t2 (a, b) values (?, ?)';
+
+set @intarg= 11;
+set @varchararg= '2222';
+execute stmt1 using @intarg, @varchararg;
+execute stmt2 using @intarg, @varchararg;
+set @intarg= 12;
+execute stmt1 using @intarg, @UNDEFINED;
+execute stmt2 using @intarg, @UNDEFINED;
+set @intarg= 13;
+execute stmt1 using @UNDEFINED, @varchararg;
+--error 1048
+execute stmt2 using @UNDEFINED, @varchararg;
+set @intarg= 14;
+set @nullarg= Null;
+execute stmt1 using @UNDEFINED, @nullarg;
+--error 1048
+execute stmt2 using @nullarg, @varchararg;
+
+select * from t1;
+select * from t2;
+
+drop table t1;
+drop table t2;
+
+--echo End of 5.0 tests.

mysql-test/t/ps_1general.test

@@ -316,8 +316,8 @@ prepare stmt4 from ' show table status from test like ''t9%'' ';
 --replace_column 8 # 12 # 13 # 14 #
 # Bug#4288
 execute stmt4;
---replace_column 2 #
 prepare stmt4 from ' show status like ''Threads_running'' ';
+--replace_column 2 #
 execute stmt4;
 prepare stmt4 from ' show variables like ''sql_mode'' ';
 execute stmt4;

mysql-test/t/ps_grant.test

@@ -35,7 +35,7 @@ use mysqltest;
 --source include/ps_create.inc
 --source include/ps_renew.inc
 --enable_query_log
-eval use $DB;
+use test;
 grant usage on mysqltest.* to second_user@localhost
 identified by 'looser' ;
 grant select on mysqltest.t9 to second_user@localhost

mysql-test/t/query_cache.test

@@ -699,7 +699,7 @@ select a from t1;
 flush query cache;
 
 drop table t1, t2;
-set GLOBAL query_cache_size=1355776
+set GLOBAL query_cache_size=1355776;
 
 
 #

mysql-test/t/rpl_slave_status.test

@@ -19,7 +19,7 @@ start slave;
 connection master;
 --disable_warnings
 drop table if exists t1;
---enable_warning
+--enable_warnings
 create table t1 (n int);
 insert into t1 values (1);
 save_master_pos;

mysql-test/t/rpl_truncate_7ndb.test

@@ -39,6 +39,7 @@ SELECT * FROM t1 ORDER BY a,b;
 --echo **** On Master ****
 connection master;
 DROP TABLE t1;
+let SERVER_VERSION=`select version()`;
 --replace_regex /\/\* xid=[0-9]+ \*\//\/* xid= *\// /table_id: [0-9]+/table_id: #/
 --replace_result $SERVER_VERSION SERVER_VERSION
 SHOW BINLOG EVENTS;

mysql-test/t/show_check-master.opt

+--log-slow-queries --log-long-format --log-queries-not-using-indexes

mysql-test/t/show_check.test

@@ -501,7 +501,19 @@ SHOW TABLES FROM no_such_database;
 --error ER_NO_SUCH_TABLE
 SHOW COLUMNS FROM no_such_table;
 
-# End of 5.0 tests.
+
+#
+# Bug #19764: SHOW commands end up in the slow log as table scans
+#
+flush status;
+show status like 'slow_queries';
+show tables;
+show status like 'slow_queries';
+# Table scan query, to ensure that slow_queries does still get incremented
+# (mysqld is started with --log-queries-not-using-indexes)
+select 1 from information_schema.tables limit 1;
+show status like 'slow_queries';
+
 --echo End of 5.0 tests.
 
 --disable_result_log

mysql-test/t/sp.test

@@ -2940,11 +2940,11 @@ begin
 end|
 --disable_parsing
 --replace_regex /table_id: [0-9]+/table_id: #/
-show binlog events;
-show storage engines;
-show master status;
-show slave hosts;
-show slave status;
+show binlog events|
+show storage engines|
+show master status|
+show slave hosts|
+show slave status|
 --enable_parsing
 
 call bug4902()|

mysql-test/t/sp_notembedded.test

@@ -19,11 +19,11 @@ begin
   show grants for 'root'@'localhost';
 end|
 --disable_parsing
-show binlog events;
-show storage engines;
-show master status;
-show slave hosts;
-show slave status;
+show binlog events|
+show storage engines|
+show master status|
+show slave hosts|
+show slave status|
 --enable_parsing
 
 call bug4902()|
@@ -110,7 +110,7 @@ flush status|
 flush query cache|
 delete from t1|
 drop procedure bug3583|
-drop table t1;
+drop table t1|
 
 #
 # BUG#6807: Stored procedure crash if CREATE PROCEDURE ... KILL QUERY

mysql-test/t/subselect.test

@@ -1728,7 +1728,7 @@ select (select a from t1) = (1,2);
 select (1,2,3) = (select * from t1);
 -- error 1241
 select (select * from t1) = (1,2,3);
-drop table t1
+drop table t1;
 
 #
 # Item_int_with_ref check (BUG#10020)

mysql-test/t/system_mysql_db_fix.test

@@ -42,7 +42,7 @@ CREATE TABLE db (
   KEY User (User)
 )
 engine=MyISAM;
---enable-warnings
+--enable_warnings
 
 INSERT INTO db VALUES ('%','test',   '','Y','Y','Y','Y','Y','Y');
 INSERT INTO db VALUES ('%','test\_%','','Y','Y','Y','Y','Y','Y');
@@ -60,7 +60,7 @@ CREATE TABLE host (
   PRIMARY KEY Host (Host,Db)
 )
 engine=MyISAM;
---enable-warnings
+--enable_warnings
 
 --disable_warnings
 CREATE TABLE user (
@@ -79,7 +79,7 @@ CREATE TABLE user (
   PRIMARY KEY Host (Host,User)
 )
 engine=MyISAM;
---enable-warnings
+--enable_warnings
 
 INSERT INTO user VALUES ('localhost','root','','Y','Y','Y','Y','Y','Y','Y','Y','Y');
 INSERT INTO user VALUES ('localhost','',    '','N','N','N','N','N','N','N','N','N');

mysql-test/t/user_var.test

@@ -144,6 +144,8 @@ select @@version;
 --replace_column 1 #
 select @@global.version;
 
+--echo End of 4.1 tests
+
 # Bug #6598: problem with cast(NULL as signed integer);
 #
 
@@ -210,4 +212,10 @@ select @var:=f2 from t1 group by f1 order by f2 desc limit 1;
 select @var;
 drop table t1;
 
-# End of 4.1 tests
+#
+# Bug#19024 - SHOW COUNT(*) WARNINGS not return Errors 
+#
+--error 1064
+insert into city 'blah';
+SHOW COUNT(*) WARNINGS;
+SHOW COUNT(*) ERRORS;

mysql-test/t/wait_timeout.test

@@ -55,7 +55,7 @@ select 2;
 select 3;
 # Disconnect so that we will not be confused by a future abort from this
 # connection.
-disconnect default
+disconnect default;
 
 #
 # Do the same test as above on a TCP connection

mysys/CMakeLists.txt

@@ -20,7 +20,7 @@ ADD_LIBRARY(mysys array.c charset-def.c charset.c checksum.c default.c default_m
 				my_clock.c my_compress.c my_conio.c my_copy.c my_crc32.c my_create.c my_delete.c
 				my_div.c my_error.c my_file.c my_fopen.c my_fstream.c my_gethostbyname.c 
 				my_gethwaddr.c my_getopt.c my_getsystime.c my_getwd.c my_handler.c my_init.c
-				my_lib.c my_lock.c my_lockmem.c my_lread.c my_lwrite.c my_malloc.c my_messnc.c
+				my_lib.c my_lock.c my_lockmem.c my_malloc.c my_messnc.c
 				my_mkdir.c my_mmap.c my_net.c my_once.c my_open.c my_pread.c my_pthread.c 
 				my_quick.c my_read.c my_realloc.c my_redel.c my_rename.c my_seek.c my_sleep.c
 				my_static.c my_symlink.c my_symlink2.c my_sync.c my_thr_init.c my_wincond.c

mysys/Makefile.am

@@ -43,7 +43,7 @@ libmysys_a_SOURCES =    my_init.c my_getwd.c mf_getdate.c my_mmap.c \
 			tree.c trie.c list.c hash.c array.c string.c typelib.c \
 			my_copy.c my_append.c my_lib.c \
 			my_delete.c my_rename.c my_redel.c \
-			my_chsize.c my_lread.c my_lwrite.c my_clock.c \
+			my_chsize.c my_clock.c \
 			my_quick.c my_lockmem.c my_static.c \
 			my_sync.c my_getopt.c my_mkdir.c \
 			default_modify.c default.c \

mysys/charset.c

@@ -312,7 +312,7 @@ static my_bool my_read_charset_file(const char *filename, myf myflags)
 {
   char *buf;
   int  fd;
-  uint len;
+  uint len, tmp_len;
   MY_STAT stat_info;
   
   if (!my_stat(filename, &stat_info, MYF(myflags)) ||
@@ -321,12 +321,11 @@ static my_bool my_read_charset_file(const char *filename, myf myflags)
     return TRUE;
   
   if ((fd=my_open(filename,O_RDONLY,myflags)) < 0)
-  {
-    my_free(buf,myflags);
-    return TRUE;
-  }
-  len=read(fd,buf,len);
+    goto error;
+  tmp_len=my_read(fd, buf, len, myflags);
   my_close(fd,myflags);
+  if (tmp_len != len)
+    goto error;
   
   if (my_parse_charset_xml(buf,len,add_collation))
   {
@@ -340,6 +339,10 @@ static my_bool my_read_charset_file(const char *filename, myf myflags)
   
   my_free(buf, myflags);  
   return FALSE;
+
+error:
+  my_free(buf, myflags);
+  return TRUE;
 }
 
 

mysys/make-ccc

 rm -f .deps/* raid.o mf_iocache.o libmysys.a
-ccc -DDEFAULT_BASEDIR="\"/usr/local/mysql\"" -DDATADIR="\"/usr/local/mysql/var\"" -DHAVE_CONFIG_H -I./../include -I../include -I.. -DDBUG_OFF -fast -O3 -fomit-frame-pointer -c array.c checksum.c default.c errors.c getopt.c getopt1.c getvar.c hash.c list.c mf_brkhant.c mf_cache.c mf_casecnv.c mf_dirname.c mf_fn_ext.c mf_format.c mf_getdate.c mf_keycache.c mf_loadpath.c mf_pack.c mf_pack2.c mf_path.c mf_qsort.c mf_qsort2.c mf_radix.c mf_reccache.c mf_same.c mf_sort.c mf_soundex.c mf_stripp.c mf_unixpath.c mf_wcomp.c mf_wfile.c mulalloc.c my_alarm.c my_alloc.c my_append.c my_chsize.c my_clock.c my_compress.c my_copy.c my_create.c my_delete.c my_div.c my_error.c my_fopen.c my_fstream.c my_getwd.c my_init.c my_lib.c my_lockmem.c my_lread.c my_lwrite.c my_malloc.c my_messnc.c my_mkdir.c my_net.c my_once.c my_open.c my_pread.c my_pthread.c my_quick.c my_read.c my_realloc.c my_redel.c my_rename.c my_seek.c my_static.c my_tempnam.c my_thr_init.c my_write.c ptr_cmp.c queues.c safemalloc.c string.c thr_alarm.c thr_lock.c thr_mutex.c thr_rwlock.c tree.c typelib.c
+ccc -DDEFAULT_BASEDIR="\"/usr/local/mysql\"" -DDATADIR="\"/usr/local/mysql/var\"" -DHAVE_CONFIG_H -I./../include -I../include -I.. -DDBUG_OFF -fast -O3 -fomit-frame-pointer -c array.c checksum.c default.c errors.c getopt.c getopt1.c getvar.c hash.c list.c mf_brkhant.c mf_cache.c mf_casecnv.c mf_dirname.c mf_fn_ext.c mf_format.c mf_getdate.c mf_keycache.c mf_loadpath.c mf_pack.c mf_pack2.c mf_path.c mf_qsort.c mf_qsort2.c mf_radix.c mf_reccache.c mf_same.c mf_sort.c mf_soundex.c mf_stripp.c mf_unixpath.c mf_wcomp.c mf_wfile.c mulalloc.c my_alarm.c my_alloc.c my_append.c my_chsize.c my_clock.c my_compress.c my_copy.c my_create.c my_delete.c my_div.c my_error.c my_fopen.c my_fstream.c my_getwd.c my_init.c my_lib.c my_lockmem.c my_malloc.c my_messnc.c my_mkdir.c my_net.c my_once.c my_open.c my_pread.c my_pthread.c my_quick.c my_read.c my_realloc.c my_redel.c my_rename.c my_seek.c my_static.c my_tempnam.c my_thr_init.c my_write.c ptr_cmp.c queues.c safemalloc.c string.c thr_alarm.c thr_lock.c thr_mutex.c thr_rwlock.c tree.c typelib.c
 make raid.o mf_iocache.o my_lock.o
 ar -cr libmysys.a array.o raid.o mf_iocache.o my_lock.o

mysys/mf_iocache.c

@@ -333,7 +333,11 @@ my_bool reinit_io_cache(IO_CACHE *info, enum cache_type type,
     {
       info->read_end=info->write_pos;
       info->end_of_file=my_b_tell(info);
-      info->seek_not_done=1;
+      /*
+        Trigger a new seek only if we have a valid
+        file handle.
+      */
+      info->seek_not_done= (info->file != -1);
     }
     else if (type == WRITE_CACHE)
     {

mysys/my_read.c

@@ -51,9 +51,10 @@ uint my_read(File Filedes, byte *Buffer, uint Count, myf MyFlags)
       DBUG_PRINT("warning",("Read only %ld bytes off %ld from %d, errno: %d",
                             readbytes, Count, Filedes, my_errno));
 #ifdef THREAD
-      if ((int) readbytes <= 0 && errno == EINTR)
+      if ((readbytes == 0 || (int) readbytes == -1) && errno == EINTR)
       {  
-        DBUG_PRINT("debug", ("my_read() was interrupted and returned %d", (int) readbytes));
+        DBUG_PRINT("debug", ("my_read() was interrupted and returned %d",
+                             (int) readbytes));
         continue;                              /* Interrupted */
       }
 #endif