Skip to content

M
mariadb
Commit 7c4e55cb authored by Matthias Leich's avatar Matthias Leich
Browse files
Options

Merge of fix for Bug#42003 and Bug#43114 into more actual GCA tree 

modifications according to the reviews are included
parents 6ac6c9ed b771483b
Show whitespace changes
Inline Side-by-side
Showing with 1386 additions and 935 deletions
mysql-test/include/wait_until_count_sessions.inc
View file @ 7c4e55cb
......@@ -2,11 +2,20 @@
#
# SUMMARY
#
# Waits until the passed number ($count_sessions) of concurrent sessions was
# observed via
# Waits until the passed number ($count_sessions) of concurrent sessions or
# a smaller number was observed via
# SHOW STATUS LIKE 'Threads_connected'
# or the operation times out.
# Note: Starting with 5.1 we could also use
# Note:
# 1. We wait for $current_sessions <= $count_sessions because in the use case
# with count_sessions.inc before and wait_until_count_sessions.inc after
# the core of the test it could happen that the disconnects of sessions
# belonging to the preceeding test are not finished.
# sessions at test begin($count_sessions) = m + n
# sessions of the previous test which will be soon disconnected = n (n >= 0)
# sessions at test end ($current sessions, assuming the test disconnects
# all additional sessions) = m
# 2. Starting with 5.1 we could also use
# SELECT COUNT(*) FROM information_schema.processlist
# I stay with "SHOW STATUS LIKE 'Threads_connected'" because this
# runs in all versions 5.0+
......@@ -19,7 +28,7 @@
#
# OR typical example of a test which uses more than one session
# Such a test could harm successing tests if there is no server shutdown
# and start between.cw
# and start between.
#
# If the testing box is slow than the disconnect of sessions belonging to
# the current test might happen when the successing test gets executed.
......@@ -79,7 +88,11 @@
# backup.test, grant3.test
#
#
# Created: 2009-01-14 mleich
# Created:
# 2009-01-14 mleich
# Modified:
# 2009-02-24 mleich Fix Bug#43114 wait_until_count_sessions too restrictive,
# random PB failures
#
let $wait_counter= 100;
......@@ -93,7 +106,7 @@ let $wait_timeout= 0;
while ($wait_counter)
{
let $current_sessions= query_get_value(SHOW STATUS LIKE 'Threads_connected', Value, 1);
let $success= `SELECT $current_sessions = $count_sessions`;
let $success= `SELECT $current_sessions <= $count_sessions`;
if ($success)
{
let $wait_counter= 0;
......@@ -107,7 +120,7 @@ while ($wait_counter)
if (!$success)
{
--echo # Timeout in wait_until_count_sessions.inc
--echo # Number of sessions expected: $count_sessions found: $current_sessions
--echo # Number of sessions expected: <= $count_sessions found: $current_sessions
SHOW PROCESSLIST;
}
mysql-test/r/consistent_snapshot.result
View file @ 7c4e55cb
drop table if exists t1;
create table t1 (a int) engine=innodb;
start transaction with consistent snapshot;
insert into t1 values(1);
select * from t1;
DROP TABLE IF EXISTS t1;
# Establish connection con1 (user=root)
# Establish connection con2 (user=root)
# Switch to connection con1
CREATE TABLE t1 (a INT) ENGINE=innodb;
START TRANSACTION WITH CONSISTENT SNAPSHOT;
# Switch to connection con2
INSERT INTO t1 VALUES(1);
# Switch to connection con1
SELECT * FROM t1;
a
commit;
delete from t1;
start transaction;
insert into t1 values(1);
select * from t1;
COMMIT;
DELETE FROM t1;
START TRANSACTION;
# Switch to connection con2
INSERT INTO t1 VALUES(1);
# Switch to connection con1
SELECT * FROM t1;
a
1
commit;
drop table t1;
COMMIT;
# Switch to connection default + close connections con1 and con2
DROP TABLE t1;
mysql-test/r/dirty_close.result
View file @ 7c4e55cb
drop table if exists t1;
create table t1 (n int);
insert into t1 values (1),(2),(3);
select * from t1;
DROP TABLE IF EXISTS t1;
CREATE TABLE t1 (n INT);
INSERT INTO t1 VALUES (1),(2),(3);
SELECT * FROM t1;
n
1
2
3
drop table t1;
DROP TABLE t1;
mysql-test/r/flush_block_commit.result
View file @ 7c4e55cb
drop table if exists t1;
create table t1 (a int) engine=innodb;
begin;
insert into t1 values(1);
flush tables with read lock;
select * from t1;
# Establish connection con1 (user=root)
# Establish connection con2 (user=root)
# Establish connection con3 (user=root)
# Switch to connection con1
DROP TABLE IF EXISTS t1;
CREATE TABLE t1 (a INT) ENGINE=innodb;
BEGIN;
INSERT INTO t1 VALUES(1);
# Switch to connection con2
FLUSH TABLES WITH READ LOCK;
SELECT * FROM t1;
a
commit;
select * from t1;
# Switch to connection con1
COMMIT;
# Switch to connection con2
SELECT * FROM t1;
a
unlock tables;
begin;
select * from t1 for update;
UNLOCK TABLES;
# Switch to connection con1
# Switch to connection con1
BEGIN;
SELECT * FROM t1 FOR UPDATE;
a
1
begin;
select * from t1 for update;
flush tables with read lock;
commit;
# Switch to connection con2
BEGIN;
SELECT * FROM t1 FOR UPDATE;
# Switch to connection con3
FLUSH TABLES WITH READ LOCK;
# Switch to connection con1
COMMIT;
# Switch to connection con2
a
1
unlock tables;
commit;
begin;
insert into t1 values(10);
flush tables with read lock;
commit;
unlock tables;
flush tables with read lock;
unlock tables;
begin;
select * from t1;
# Switch to connection con3
UNLOCK TABLES;
# Switch to connection con2
COMMIT;
# Switch to connection con1
BEGIN;
INSERT INTO t1 VALUES(10);
FLUSH TABLES WITH READ LOCK;
COMMIT;
UNLOCK TABLES;
# Switch to connection con2
FLUSH TABLES WITH READ LOCK;
UNLOCK TABLES;
BEGIN;
SELECT * FROM t1;
a
1
10
show create database test;
SHOW CREATE DATABASE test;
Database Create Database
test CREATE DATABASE `test` /*!40100 DEFAULT CHARACTER SET latin1 */
drop table t1;
DROP TABLE t1;
# Switch to connection default and close connections con1, con2, con3
mysql-test/r/flush_block_commit_notembedded.result
View file @ 7c4e55cb
create table t1 (a int) engine=innodb;
reset master;
set autocommit=0;
insert t1 values (1);
flush tables with read lock;
show master status;
# Establish connection con1 (user=root)
# Establish connection con2 (user=root)
# Switch to connection con1
CREATE TABLE t1 (a INT) ENGINE=innodb;
RESET MASTER;
SET AUTOCOMMIT=0;
INSERT t1 VALUES (1);
# Switch to connection con2
FLUSH TABLES WITH READ LOCK;
SHOW MASTER STATUS;
File Position Binlog_Do_DB Binlog_Ignore_DB
master-bin.000001 98
commit;
show master status;
# Switch to connection con1
COMMIT;
# Switch to connection con2
SHOW MASTER STATUS;
File Position Binlog_Do_DB Binlog_Ignore_DB
master-bin.000001 98
unlock tables;
drop table t1;
set autocommit=1;
UNLOCK TABLES;
# Switch to connection con1
DROP TABLE t1;
SET AUTOCOMMIT=1;
# Switch to connection default and close connections con1 and con2
mysql-test/r/flush_read_lock_kill.result
View file @ 7c4e55cb
drop table if exists t1;
create table t1 (kill_id int);
insert into t1 values(connection_id());
flush tables with read lock;
select ((@id := kill_id) - kill_id) from t1;
SET @old_concurrent_insert= @@global.concurrent_insert;
SET @@global.concurrent_insert= 0;
DROP TABLE IF EXISTS t1;
CREATE TABLE t1 (kill_id INT);
INSERT INTO t1 VALUES(connection_id());
FLUSH TABLES WITH READ LOCK;
SELECT ((@id := kill_id) - kill_id) FROM t1;
((@id := kill_id) - kill_id)
0
kill connection @id;
drop table t1;
KILL CONNECTION @id;
DROP TABLE t1;
SET @@global.concurrent_insert= @old_concurrent_insert;
mysql-test/r/lock_multi.result
View file @ 7c4e55cb
......@@ -51,10 +51,10 @@ ERROR HY000: Can't execute the query because you have a conflicting read lock
UNLOCK TABLES;
DROP DATABASE mysqltest_1;
ERROR HY000: Can't drop database 'mysqltest_1'; database doesn't exist
use mysql;
USE mysql;
LOCK TABLES columns_priv WRITE, db WRITE, host WRITE, user WRITE;
FLUSH TABLES;
use mysql;
USE mysql;
SELECT user.Select_priv FROM user, db WHERE user.user = db.user LIMIT 1;
OPTIMIZE TABLES columns_priv, db, host, user;
Table Op Msg_type Msg_text
......@@ -65,7 +65,7 @@ mysql.user optimize status OK
UNLOCK TABLES;
Select_priv
N
use test;
USE test;
use test;
CREATE TABLE t1 (c1 int);
LOCK TABLE t1 WRITE;
......@@ -93,7 +93,7 @@ create table t1 (a int);
connection: locker
lock tables t1 read;
connection: writer
create table t2 like t1;;
create table t2 like t1;
connection: default
kill query
ERROR 70100: Query execution was interrupted
......
mysql-test/r/mysqlbinlog.result
View file @ 7c4e55cb
......@@ -349,9 +349,9 @@ DELIMITER ;
ROLLBACK /* added by mysqlbinlog */;
/*!50003 SET COMPLETION_TYPE=@OLD_COMPLETION_TYPE*/;
CREATE TABLE t1 (c1 CHAR(10));
flush logs;
FLUSH LOGS;
INSERT INTO t1 VALUES ('0123456789');
flush logs;
FLUSH LOGS;
DROP TABLE t1;
We expect this value to be 1
The bug being tested was that 'Query' lines were not preceded by '#'
......@@ -361,23 +361,23 @@ SELECT COUNT(*) AS `BUG#28293_expect_1` FROM patch WHERE a LIKE '%Query%';
BUG#28293_expect_1
1
DROP TABLE patch;
flush logs;
create table t1(a int);
insert into t1 values(connection_id());
flush logs;
drop table t1;
FLUSH LOGS;
CREATE TABLE t1(a INT);
INSERT INTO t1 VALUES(connection_id());
FLUSH LOGS;
DROP TABLE t1;
1
drop table t1;
DROP TABLE t1;
shell> mysqlbinlog std_data/corrupt-relay-bin.000624 > var/tmp/bug31793.sql
set @@global.server_id= 4294967295;
reset master;
flush logs;
select
(@a:=load_file("MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
is not null;
(@a:=load_file("MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
is not null
SET @@global.server_id= 4294967295;
RESET MASTER;
FLUSH LOGS;
SELECT
(@a:=LOAD_FILE("MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
IS NOT NULL;
(@a:=LOAD_FILE("MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
IS NOT NULL
1
*** Unsigned server_id 4294967295 is found: 1 ***
set @@global.server_id= 1;
SET @@global.server_id= 1;
End of 5.0 tests
mysql-test/r/read_only.result
View file @ 7c4e55cb
......@@ -47,7 +47,7 @@ Note 1051 Unknown table 'ttt'
drop table t1,t2;
drop user test@localhost;
#
# Bug #27440 read_only allows create and drop database
# Bug#27440 read_only allows create and drop database
#
drop database if exists mysqltest_db1;
drop database if exists mysqltest_db2;
......
mysql-test/r/skip_name_resolve.result
View file @ 7c4e55cb
......@@ -5,10 +5,10 @@ GRANT USAGE ON *.* TO 'mysqltest_1'@'127.0.0.1/255.255.255.255'
GRANT ALL PRIVILEGES ON `test`.* TO 'mysqltest_1'@'127.0.0.1/255.255.255.255'
REVOKE ALL ON test.* FROM mysqltest_1@'127.0.0.1/255.255.255.255';
DROP USER mysqltest_1@'127.0.0.1/255.255.255.255';
select user();
user()
SELECT USER();
USER()
#
show processlist;
SHOW PROCESSLIST;
Id User Host db Command Time State Info
<id> root <host> test <command> <time> <state> <info>
<id> root <host> test <command> <time> <state> <info>
mysql-test/r/sp-security.result
View file @ 7c4e55cb
......@@ -332,7 +332,7 @@ ERROR 42000: SELECT command denied to user 'user_bug14533'@'localhost' for table
drop user user_bug14533@localhost;
drop database db_bug14533;
CREATE DATABASE db_bug7787;
use db_bug7787;
USE db_bug7787;
CREATE PROCEDURE p1()
SHOW INNODB STATUS;
Warnings:
......@@ -352,12 +352,12 @@ GRANT SUPER ON *.* TO mysqltest_2@localhost;
GRANT ALL PRIVILEGES ON mysqltest.* TO mysqltest_2@localhost;
---> connection: mysqltest_2_con
use mysqltest;
USE mysqltest;
CREATE PROCEDURE wl2897_p1() SELECT 1;
CREATE FUNCTION wl2897_f1() RETURNS INT RETURN 1;
---> connection: mysqltest_1_con
use mysqltest;
USE mysqltest;
CREATE DEFINER=root@localhost PROCEDURE wl2897_p2() SELECT 2;
ERROR 42000: Access denied; you need the SUPER privilege for this operation
CREATE DEFINER=root@localhost FUNCTION wl2897_f2() RETURNS INT RETURN 2;
......@@ -373,7 +373,7 @@ Warnings:
Note 1449 There is no 'a @ b @ c'@'localhost' registered
---> connection: con1root
use mysqltest;
USE mysqltest;
SHOW CREATE PROCEDURE wl2897_p1;
Procedure sql_mode Create Procedure
wl2897_p1 CREATE DEFINER=`mysqltest_2`@`localhost` PROCEDURE `wl2897_p1`()
......@@ -403,7 +403,7 @@ CREATE USER mysqltest_2@localhost;
GRANT ALL PRIVILEGES ON mysqltest.* TO mysqltest_2@localhost;
---> connection: mysqltest_1_con
use mysqltest;
USE mysqltest;
CREATE PROCEDURE bug13198_p1()
SELECT 1;
CREATE FUNCTION bug13198_f1() RETURNS INT
......@@ -416,7 +416,7 @@ bug13198_f1()
1
---> connection: mysqltest_2_con
use mysqltest;
USE mysqltest;
CALL bug13198_p1();
1
1
......@@ -428,7 +428,7 @@ bug13198_f1()
DROP USER mysqltest_1@localhost;
---> connection: mysqltest_2_con
use mysqltest;
USE mysqltest;
CALL bug13198_p1();
ERROR HY000: There is no 'mysqltest_1'@'localhost' registered
SELECT bug13198_f1();
......@@ -445,7 +445,7 @@ Host User Password
localhost user19857 *82DC221D557298F6CE9961037DB1C90604792F5C
---> connection: mysqltest_2_con
use test;
USE test;
CREATE PROCEDURE sp19857() DETERMINISTIC
BEGIN
DECLARE a INT;
......
mysql-test/r/view.result
View file @ 7c4e55cb
......@@ -3603,7 +3603,7 @@ DROP VIEW v2;
DROP VIEW v3;
DROP TABLE t1;
#
# Bug#29477: Not all fields of the target table were checked to have
# Bug#29477 Not all fields of the target table were checked to have
# a default value when inserting into a view.
#
create table t1(f1 int, f2 int not null);
......@@ -3643,7 +3643,7 @@ MAX(a) COUNT(DISTINCT a)
DROP VIEW v1;
DROP TABLE t1;
# -----------------------------------------------------------------
# -- Bug#34337: Server crash when Altering a view using a table name.
# -- Bug#34337 Server crash when Altering a view using a table name.
# -----------------------------------------------------------------
DROP TABLE IF EXISTS t1;
......@@ -3660,7 +3660,7 @@ DROP TABLE t1;
# -- End of test case for Bug#34337.
# -----------------------------------------------------------------
# -- Bug#35193: VIEW query is rewritten without "FROM DUAL",
# -- Bug#35193 VIEW query is rewritten without "FROM DUAL",
# -- causing syntax error
# -----------------------------------------------------------------
......
mysql-test/r/view_grant.result
View file @ 7c4e55cb
......@@ -788,7 +788,7 @@ v3 CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VI
DROP USER u26813@localhost;
DROP DATABASE db26813;
#
# Bug#29908: A user can gain additional access through the ALTER VIEW.
# Bug#29908 A user can gain additional access through the ALTER VIEW.
#
CREATE DATABASE mysqltest_29908;
USE mysqltest_29908;
......
mysql-test/t/alter_table-big.test
View file @ 7c4e55cb
# In order to be more or less robust test for bug#25044 has to take
# In order to be more or less robust test for Bug#25044 has to take
# significant time (e.g. about 9 seconds on my (Dmitri's) computer)
# so we probably want execute it only in --big-test mode.
# Also in 5.1 this test will require statement-based binlog.
......@@ -6,8 +6,8 @@
#
# Test for bug #25044 "ALTER TABLE ... ENABLE KEYS acquires global
# 'opening tables' lock".
# Test for Bug#25044 ALTER TABLE ... ENABLE KEYS acquires global
# 'opening tables' lock
#
# ALTER TABLE ... ENABLE KEYS should not acquire LOCK_open mutex for
# the whole its duration as it prevents other queries from execution.
......@@ -57,6 +57,7 @@ show binlog events in 'master-bin.000001' from 98;
# Clean up
drop tables t1, t2;
disconnect addconroot;
--echo End of 5.0 tests
mysql-test/t/connect.test
View file @ 7c4e55cb
......@@ -18,12 +18,16 @@ connect (con2,localhost,root,,test);
show tables;
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,root,z,test2);
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,root,z,);
connection default;
disconnect con1;
disconnect con2;
grant ALL on *.* to test@localhost identified by "gambling";
grant ALL on *.* to test@127.0.0.1 identified by "gambling";
......@@ -35,20 +39,23 @@ show tables;
connect (con4,localhost,test,gambling,test);
show tables;
connection default;
disconnect con3;
disconnect con4;
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,,test2);
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,,"");
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,zorro,test2);
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,zorro,);
# check if old password version also works
update mysql.user set password=old_password("gambling2") where user=_binary"test";
flush privileges;
......@@ -57,30 +64,34 @@ connect (con10,localhost,test,gambling2,);
connect (con5,localhost,test,gambling2,mysql);
connection con5;
set password="";
--error 1372
--error ER_PASSWD_LENGTH
set password='gambling3';
set password=old_password('gambling3');
show tables;
connect (con6,localhost,test,gambling3,test);
show tables;
connection default;
disconnect con10;
disconnect con5;
disconnect con6;
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,,test2);
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,,);
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,zorro,test2);
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--error 1045
--error ER_ACCESS_DENIED_ERROR
connect (fail_con,localhost,test,zorro,);
# remove user 'test' so that other tests which may use 'test'
# do not depend on this test.
delete from mysql.user where user=_binary"test";
flush privileges;
......@@ -98,4 +109,5 @@ disconnect con7;
connection default;
drop table t1;
# End of 4.1 tests
mysql-test/t/consistent_snapshot.test
View file @ 7c4e55cb
-- source include/have_innodb.inc
--source include/have_innodb.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--disable_warnings
drop table if exists t1;
DROP TABLE IF EXISTS t1;
--enable_warnings
--echo # Establish connection con1 (user=root)
connect (con1,localhost,root,,);
--echo # Establish connection con2 (user=root)
connect (con2,localhost,root,,);
### Test 1:
### - While a consistent snapshot transaction is executed,
### no external inserts should be visible to the transaction.
--echo # Switch to connection con1
connection con1;
create table t1 (a int) engine=innodb;
start transaction with consistent snapshot;
CREATE TABLE t1 (a INT) ENGINE=innodb;
START TRANSACTION WITH CONSISTENT SNAPSHOT;
--echo # Switch to connection con2
connection con2;
insert into t1 values(1);
INSERT INTO t1 VALUES(1);
--echo # Switch to connection con1
connection con1;
select * from t1; # if consistent snapshot was set as expected, we
SELECT * FROM t1; # if consistent snapshot was set as expected, we
# should see nothing.
commit;
COMMIT;
### Test 2:
### - For any non-consistent snapshot transaction, external
### committed inserts should be visible to the transaction.
delete from t1;
start transaction; # Now we omit WITH CONSISTENT SNAPSHOT
DELETE FROM t1;
START TRANSACTION; # Now we omit WITH CONSISTENT SNAPSHOT
--echo # Switch to connection con2
connection con2;
insert into t1 values(1);
INSERT INTO t1 VALUES(1);
--echo # Switch to connection con1
connection con1;
select * from t1; # if consistent snapshot was not set, as expected, we
SELECT * FROM t1; # if consistent snapshot was not set, as expected, we
# should see 1.
commit;
COMMIT;
drop table t1;
--echo # Switch to connection default + close connections con1 and con2
connection default;
disconnect con1;
disconnect con2;
DROP TABLE t1;
# End of 4.1 tests
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/dirty_close.test
View file @ 7c4e55cb
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
connect (con1,localhost,root,,);
connect (con2,localhost,root,,);
connection con1;
......@@ -5,12 +9,19 @@ dirty_close con1;
connection con2;
--disable_warnings
drop table if exists t1;
DROP TABLE IF EXISTS t1;
--enable_warnings
create table t1 (n int);
insert into t1 values (1),(2),(3);
select * from t1;
drop table t1;
CREATE TABLE t1 (n INT);
INSERT INTO t1 VALUES (1),(2),(3);
SELECT * FROM t1;
DROP TABLE t1;
connection default;
disconnect con2;
# End of 4.1 tests
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/flush_block_commit.test
View file @ 7c4e55cb
......@@ -4,74 +4,106 @@
# This is intended to mimick how mysqldump and innobackup work.
# And it requires InnoDB
-- source include/have_innodb.inc
--source include/have_innodb.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--echo # Establish connection con1 (user=root)
connect (con1,localhost,root,,);
--echo # Establish connection con2 (user=root)
connect (con2,localhost,root,,);
--echo # Establish connection con3 (user=root)
connect (con3,localhost,root,,);
--echo # Switch to connection con1
connection con1;
--disable_warnings
drop table if exists t1;
DROP TABLE IF EXISTS t1;
--enable_warnings
create table t1 (a int) engine=innodb;
CREATE TABLE t1 (a INT) ENGINE=innodb;
# blocks COMMIT ?
begin;
insert into t1 values(1);
BEGIN;
INSERT INTO t1 VALUES(1);
--echo # Switch to connection con2
connection con2;
flush tables with read lock;
select * from t1;
FLUSH TABLES WITH READ LOCK;
SELECT * FROM t1;
--echo # Switch to connection con1
connection con1;
send commit; # blocked by con2
send COMMIT; # blocked by con2
sleep 1;
--echo # Switch to connection con2
connection con2;
select * from t1; # verify con1 was blocked and data did not move
unlock tables;
SELECT * FROM t1; # verify con1 was blocked and data did not move
UNLOCK TABLES;
--echo # Switch to connection con1
connection con1;
reap;
# No deadlock ?
--echo # Switch to connection con1
connection con1;
begin;
select * from t1 for update;
BEGIN;
SELECT * FROM t1 FOR UPDATE;
--echo # Switch to connection con2
connection con2;
begin;
send select * from t1 for update; # blocked by con1
BEGIN;
send SELECT * FROM t1 FOR UPDATE; # blocked by con1
sleep 1;
--echo # Switch to connection con3
connection con3;
send flush tables with read lock; # blocked by con2
send FLUSH TABLES WITH READ LOCK; # blocked by con2
--echo # Switch to connection con1
connection con1;
commit; # should not be blocked by con3
COMMIT; # should not be blocked by con3
--echo # Switch to connection con2
connection con2;
reap;
--echo # Switch to connection con3
connection con3;
reap;
unlock tables;
UNLOCK TABLES;
# BUG#6732 FLUSH TABLES WITH READ LOCK + COMMIT hangs later FLUSH TABLES
# Bug#6732 FLUSH TABLES WITH READ LOCK + COMMIT hangs later FLUSH TABLES
# WITH READ LOCK
--echo # Switch to connection con2
connection con2;
commit; # unlock InnoDB row locks to allow insertions
COMMIT; # unlock InnoDB row locks to allow insertions
--echo # Switch to connection con1
connection con1;
begin;
insert into t1 values(10);
flush tables with read lock;
commit;
unlock tables;
BEGIN;
INSERT INTO t1 VALUES(10);
FLUSH TABLES WITH READ LOCK;
COMMIT;
UNLOCK TABLES;
--echo # Switch to connection con2
connection con2;
flush tables with read lock; # bug caused hang here
unlock tables;
FLUSH TABLES WITH READ LOCK; # bug caused hang here
UNLOCK TABLES;
# Bug#7358 SHOW CREATE DATABASE fails if open transaction
BEGIN;
SELECT * FROM t1;
SHOW CREATE DATABASE test;
# BUG#7358 SHOW CREATE DATABASE fails if open transaction
DROP TABLE t1;
begin;
select * from t1;
show create database test;
drop table t1;
# Cleanup
--echo # Switch to connection default and close connections con1, con2, con3
connection default;
disconnect con1;
disconnect con2;
disconnect con3;
# End of 4.1 tests
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/flush_block_commit_notembedded.test
View file @ 7c4e55cb
......@@ -3,32 +3,51 @@
# We verify that we did not introduce a deadlock.
# This is intended to mimick how mysqldump and innobackup work.
-- source include/have_log_bin.inc
--source include/have_log_bin.inc
# And it requires InnoDB
-- source include/have_log_bin.inc
-- source include/have_innodb.inc
--source include/have_log_bin.inc
--source include/have_innodb.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--echo # Establish connection con1 (user=root)
connect (con1,localhost,root,,);
--echo # Establish connection con2 (user=root)
connect (con2,localhost,root,,);
# FLUSH TABLES WITH READ LOCK should block writes to binlog too
--echo # Switch to connection con1
connection con1;
create table t1 (a int) engine=innodb;
reset master;
set autocommit=0;
insert t1 values (1);
CREATE TABLE t1 (a INT) ENGINE=innodb;
RESET MASTER;
SET AUTOCOMMIT=0;
INSERT t1 VALUES (1);
--echo # Switch to connection con2
connection con2;
flush tables with read lock;
show master status;
FLUSH TABLES WITH READ LOCK;
SHOW MASTER STATUS;
--echo # Switch to connection con1
connection con1;
send commit;
send COMMIT;
--echo # Switch to connection con2
connection con2;
sleep 1;
show master status;
unlock tables;
SHOW MASTER STATUS;
UNLOCK TABLES;
--echo # Switch to connection con1
connection con1;
reap;
drop table t1;
set autocommit=1;
DROP TABLE t1;
SET AUTOCOMMIT=1;
--echo # Switch to connection default and close connections con1 and con2
connection default;
disconnect con1;
disconnect con2;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/flush_read_lock_kill.test
View file @ 7c4e55cb
......@@ -8,19 +8,27 @@
# won't test anything interesting).
# This also won't work with the embedded server test
-- source include/not_embedded.inc
--source include/not_embedded.inc
-- source include/have_debug.inc
--source include/have_debug.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
# Disable concurrent inserts to avoid test failures when reading the
# connection id which was inserted into a table by another thread.
SET @old_concurrent_insert= @@global.concurrent_insert;
SET @@global.concurrent_insert= 0;
connect (con1,localhost,root,,);
connect (con2,localhost,root,,);
connection con1;
--disable_warnings
drop table if exists t1;
DROP TABLE IF EXISTS t1;
--enable_warnings
create table t1 (kill_id int);
insert into t1 values(connection_id());
CREATE TABLE t1 (kill_id INT);
INSERT INTO t1 VALUES(connection_id());
# Thanks to the parameter we passed to --debug, this FLUSH will
# block on a debug build running with our --debug=make_global... It
......@@ -28,14 +36,14 @@ insert into t1 values(connection_id());
# --debug) it will succeed immediately
connection con1;
send flush tables with read lock;
send FLUSH TABLES WITH READ LOCK;
# kill con1
connection con2;
select ((@id := kill_id) - kill_id) from t1;
SELECT ((@id := kill_id) - kill_id) FROM t1;
--sleep 2 # leave time for FLUSH to block
kill connection @id;
KILL CONNECTION @id;
connection con1;
# On debug builds it will be error 1053 (killed); on non-debug, or
......@@ -46,4 +54,13 @@ connection con1;
reap;
connection con2;
drop table t1;
DROP TABLE t1;
connection default;
disconnect con2;
# Restore global concurrent_insert value
SET @@global.concurrent_insert= @old_concurrent_insert;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/init_connect.test
View file @ 7c4e55cb
......@@ -5,6 +5,9 @@
# should work with embedded server after mysqltest is fixed
--source include/not_embedded.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--source include/add_anonymous_users.inc
connect (con0,localhost,root,,);
......@@ -233,7 +236,8 @@ connect (con1,localhost,mysqltest1,,);
connection con1;
select * from t1;
connection con0;
connection default;
disconnect con0;
disconnect con1;
drop trigger trg1;
......@@ -244,3 +248,7 @@ set global init_connect="set @a='a\\0c'";
revoke all privileges, grant option from mysqltest1@localhost;
drop user mysqltest1@localhost;
drop table t1, t2;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/lock_multi.test
View file @ 7c4e55cb
-- source include/not_embedded.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--disable_warnings
drop table if exists t1,t2;
--enable_warnings
......@@ -14,12 +18,23 @@ create table t1(n int);
insert into t1 values (1);
lock tables t1 write;
connection writer;
send update low_priority t1 set n = 4;
send
update low_priority t1 set n = 4;
connection reader;
--sleep 2
send select n from t1;
# Sleep a bit till the update of connection writer is in work and hangs
let $wait_timeout= 5;
let $show_statement= SHOW PROCESSLIST;
let $field= State;
let $condition= = 'Locked';
--source include/wait_show_condition.inc
send
select n from t1;
connection locker;
--sleep 2
# Sleep a bit till the select of connection reader is in work and hangs
# Here we cannot use include/wait_show_condition.inc because this routine
# cannot count the number of 'Locked' sessions or access two columns within
# the same query_get_value call.
--sleep 3
unlock tables;
connection writer;
reap;
......@@ -32,12 +47,23 @@ create table t1(n int);
insert into t1 values (1);
lock tables t1 read;
connection writer;
send update low_priority t1 set n = 4;
send
update low_priority t1 set n = 4;
connection reader;
--sleep 2
send select n from t1;
# Sleep a bit till the update of connection writer is in work and hangs
let $wait_timeout= 5;
let $show_statement= SHOW PROCESSLIST;
let $field= State;
let $condition= = 'Locked';
--source include/wait_show_condition.inc
#
send
select n from t1;
connection locker;
--sleep 2
# Sleep a bit till the select of connection reader is in work and hangs
# Here we cannot use include/wait_show_condition.inc.
--sleep 3
#
unlock tables;
connection writer;
reap;
......@@ -58,10 +84,15 @@ insert into t1 values(2,2);
insert into t2 values(1,2);
lock table t1 read;
connection writer;
--sleep 2
send update t1,t2 set c=a where b=d;
# mleich: IMHO the "send is not necessary because the update should not block.
# But it will save some runtime in case we block because of an error.
send
update t1,t2 set c=a where b=d;
connection reader;
--sleep 2
# Sleep a bit till the update of connection writer is finished
# Here we cannot use include/wait_show_condition.inc.
--sleep 3
#
select c from t2;
connection writer;
reap;
......@@ -70,7 +101,7 @@ drop table t1;
drop table t2;
#
# Test problem when using locks on many tables and droping a table that
# Test problem when using locks on many tables and dropping a table that
# is to-be-locked by another thread
#
......@@ -79,11 +110,18 @@ create table t1 (a int);
create table t2 (a int);
lock table t1 write, t2 write;
connection reader;
send insert t1 select * from t2;
send
insert t1 select * from t2;
connection locker;
# Sleep a bit till the insert of connection reader is in work and hangs
let $wait_timeout= 5;
let $show_statement= SHOW PROCESSLIST;
let $field= State;
let $condition= = 'Locked';
--source include/wait_show_condition.inc
drop table t2;
connection reader;
--error 1146
--error ER_NO_SUCH_TABLE
reap;
connection locker;
drop table t1;
......@@ -91,7 +129,7 @@ drop table t1;
# End of 4.1 tests
#
# BUG#9998 - MySQL client hangs on USE "database"
# Bug#9998 MySQL client hangs on USE "database"
#
create table t1(a int);
lock tables t1 write;
......@@ -102,7 +140,7 @@ unlock tables;
drop table t1;
#
# Bug#19815 - CREATE/RENAME/DROP DATABASE can deadlock on a global read lock
# Bug#19815 CREATE/RENAME/DROP DATABASE can deadlock on a global read lock
#
connect (con1,localhost,root,,);
connect (con2,localhost,root,,);
......@@ -114,12 +152,18 @@ FLUSH TABLES WITH READ LOCK;
# With bug in place: acquire LOCK_mysql_create_table and
# wait in wait_if_global_read_lock().
connection con2;
send DROP DATABASE mysqltest_1;
--sleep 1
send
DROP DATABASE mysqltest_1;
#
# With bug in place: try to acquire LOCK_mysql_create_table...
# When fixed: Reject dropping db because of the read lock.
connection con1;
# Wait a bit so that the session con2 is in state "Waiting for release of readlock"
let $wait_timeout= 5;
let $show_statement= SHOW PROCESSLIST;
let $field= State;
let $condition= = 'Waiting for release of readlock';
--source include/wait_show_condition.inc
--error ER_CANT_UPDATE_WITH_READLOCK
DROP DATABASE mysqltest_1;
UNLOCK TABLES;
......@@ -135,26 +179,33 @@ disconnect con2;
--error ER_DB_DROP_EXISTS
DROP DATABASE mysqltest_1;
#
# Bug#16986 - Deadlock condition with MyISAM tables
# Bug#16986 Deadlock condition with MyISAM tables
#
# Need a matching user in mysql.user for multi-table select
--source include/add_anonymous_users.inc
connection locker;
use mysql;
USE mysql;
LOCK TABLES columns_priv WRITE, db WRITE, host WRITE, user WRITE;
FLUSH TABLES;
--sleep 1
#
connection reader;
use mysql;
#NOTE: This must be a multi-table select, otherwise the deadlock will not occur
send SELECT user.Select_priv FROM user, db WHERE user.user = db.user LIMIT 1;
--sleep 1
USE mysql;
# Note: This must be a multi-table select, otherwise the deadlock will not occur
send
SELECT user.Select_priv FROM user, db WHERE user.user = db.user LIMIT 1;
#
connection locker;
# Sleep a bit till the select of connection reader is in work and hangs
let $wait_timeout= 5;
let $show_statement= SHOW PROCESSLIST;
let $field= State;
let $condition= = 'Locked';
--source include/wait_show_condition.inc
# Make test case independent from earlier grants.
--replace_result "Table is already up to date" "OK"
OPTIMIZE TABLES columns_priv, db, host, user;
......@@ -162,7 +213,7 @@ UNLOCK TABLES;
#
connection reader;
reap;
use test;
USE test;
#
connection locker;
use test;
......@@ -177,11 +228,17 @@ LOCK TABLE t1 WRITE;
#
# This waits until t1 is unlocked.
connection locker;
send FLUSH TABLES WITH READ LOCK;
--sleep 1
send
FLUSH TABLES WITH READ LOCK;
#
# This must not block.
connection writer;
# Sleep a bit till the flush of connection locker is in work and hangs
let $wait_timeout= 5;
let $show_statement= SHOW PROCESSLIST;
let $field= State;
let $condition= = 'Flushing tables';
--source include/wait_show_condition.inc
CREATE TABLE t2 (c1 int);
UNLOCK TABLES;
#
......@@ -201,12 +258,18 @@ LOCK TABLE t1 WRITE;
#
# This waits until t1 is unlocked.
connection locker;
send FLUSH TABLES WITH READ LOCK;
--sleep 1
send
FLUSH TABLES WITH READ LOCK;
#
# This must not block.
connection writer;
--error 1100
# Sleep a bit till the flush of connection locker is in work and hangs
let $wait_timeout= 5;
let $show_statement= SHOW PROCESSLIST;
let $field= State;
let $condition= = 'Flushing tables';
--source include/wait_show_condition.inc
--error ER_TABLE_NOT_LOCKED
CREATE TABLE t2 AS SELECT * FROM t1;
UNLOCK TABLES;
#
......@@ -220,8 +283,9 @@ DROP TABLE t1;
--source include/delete_anonymous_users.inc
#
# Bug #17264: MySQL Server freeze
# Bug#17264 MySQL Server freeze
#
connection locker;
# Disable warnings to allow test to run also without InnoDB
......@@ -230,17 +294,29 @@ create table t1 (f1 int(12) unsigned not null auto_increment, primary key(f1)) e
--enable_warnings
lock tables t1 write;
connection writer;
--sleep 2
# mleich: I have doubts if the next sleep is really necessary
# Therefore I set it to comment but don't remove it
# in case it hat to be enabled again.
# --sleep 2
delimiter //;
send alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; //
send
alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; //
delimiter ;//
connection reader;
--sleep 2
# Wait till connection writer is blocked
let $wait_timeout= 5;
let $show_statement= SHOW PROCESSLIST;
let $field= State;
let $condition= = 'Locked';
--source include/wait_show_condition.inc
delimiter //;
send alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; //
send
alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; alter table t1 auto_increment=0; //
delimiter ;//
connection locker;
--sleep 2
# Wait till connection reader is blocked
# Here we cannot use include/wait_show_condition.inc.
--sleep 3
unlock tables;
connection writer;
reap;
......@@ -263,7 +339,7 @@ lock tables t1 read;
--echo connection: writer
connection writer;
let $ID= `select connection_id()`;
--send create table t2 like t1;
send create table t2 like t1;
--echo connection: default
connection default;
let $show_type= open tables where in_use=2 and name_locked=1;
......@@ -282,7 +358,7 @@ connection default;
drop table t1;
#
# Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
# Bug#38691 segfault/abort in ``UPDATE ...JOIN'' while
# ``FLUSH TABLES WITH READ LOCK''
#
......@@ -354,7 +430,7 @@ while ($i) {
dec $i;
--connection locker
--error 0,1060
--error 0,ER_DUP_FIELDNAME
ALTER TABLE t2 ADD COLUMN a int(11) unsigned default NULL;
UPDATE t2 SET a=b;
......@@ -362,11 +438,11 @@ while ($i) {
--send UPDATE t2 INNER JOIN (t1 JOIN t3 USING(a)) USING(a) SET a = NULL WHERE t1.b <> t2.b
--connection locker
--error 0,1091
--error 0,ER_CANT_DROP_FIELD_OR_KEY
ALTER TABLE t2 DROP COLUMN a;
--connection writer
--error 0,1054
--error 0,ER_BAD_FIELD_ERROR
--reap
}
--enable_query_log
......@@ -379,7 +455,7 @@ while ($i) {
dec $i;
--connection locker
--error 0,1060
--error 0,ER_DUP_FIELDNAME
ALTER TABLE t2 ADD COLUMN a int(11) unsigned default NULL;
UPDATE t2 SET a=b;
......@@ -388,11 +464,11 @@ while ($i) {
--send EXECUTE stmt
--connection locker
--error 0,1091
--error 0,ER_CANT_DROP_FIELD_OR_KEY
ALTER TABLE t2 DROP COLUMN a;
--connection writer
--error 0,1054
--error 0,ER_BAD_FIELD_ERROR
--reap
}
......@@ -400,6 +476,7 @@ while ($i) {
--connection default
DROP TABLE t1, t2, t3;
#
# Bug#38499: flush tables and multitable table update with derived table cause
# crash
......@@ -460,7 +537,7 @@ while ($i) {
dec $i;
--connection locker
--error 0,1060
--error 0,ER_DUP_FIELDNAME
ALTER TABLE t1 ADD COLUMN a int(11) unsigned default NULL;
UPDATE t1 SET a=b;
......@@ -468,11 +545,11 @@ while ($i) {
--send UPDATE t1, (SELECT 1 FROM t1 t1i) d SET a = 0 WHERE 1=0;
--connection locker
--error 0,1091
--error 0,ER_CANT_DROP_FIELD_OR_KEY
ALTER TABLE t1 DROP COLUMN a;
--connection writer
--error 0,1054 # unknown column error
--error 0,ER_BAD_FIELD_ERROR # unknown column error
--reap
}
--enable_query_log
......@@ -485,7 +562,7 @@ while ($i) {
dec $i;
--connection locker
--error 0,1060
--error 0,ER_DUP_FIELDNAME
ALTER TABLE t1 ADD COLUMN a INT;
UPDATE t1 SET a=b;
......@@ -494,11 +571,11 @@ while ($i) {
--send EXECUTE stmt
--connection locker
--error 0,1091
--error 0,ER_CANT_DROP_FIELD_OR_KEY
ALTER TABLE t1 DROP COLUMN a;
--connection writer
--error 0,1054 # Unknown column 'a' in 'field list'
--error 0,ER_BAD_FIELD_ERROR # Unknown column 'a' in 'field list'
--reap
}
--enable_query_log
......@@ -557,7 +634,7 @@ while ($i) {
dec $i;
--connection locker
--error 0,1060
--error 0,ER_DUP_FIELDNAME
ALTER TABLE t1 ADD COLUMN a int(11) unsigned default NULL;
UPDATE t1 SET a=b;
......@@ -565,11 +642,11 @@ while ($i) {
--send UPDATE t1, ((SELECT 1 FROM t1 t1i) UNION (SELECT 2 FROM t1 t1ii)) e SET a = 0 WHERE 1=0;
--connection locker
--error 0,1091
--error 0,ER_CANT_DROP_FIELD_OR_KEY
ALTER TABLE t1 DROP COLUMN a;
--connection writer
--error 0,1054 # Unknown column 'a' in 'field list'
--error 0,ER_BAD_FIELD_ERROR # Unknown column 'a' in 'field list'
--reap
}
--enable_query_log
......@@ -582,7 +659,7 @@ while ($i) {
dec $i;
--connection locker
--error 0,1060
--error 0,ER_DUP_FIELDNAME
ALTER TABLE t1 ADD COLUMN a INT;
UPDATE t1 SET a=b;
......@@ -591,15 +668,25 @@ while ($i) {
--send EXECUTE stmt
--connection locker
--error 0,1091
--error 0,ER_CANT_DROP_FIELD_OR_KEY
ALTER TABLE t1 DROP COLUMN a;
--connection writer
--error 0,1054 # Unknown column 'a' in 'field list'
--error 0,ER_BAD_FIELD_ERROR # Unknown column 'a' in 'field list'
--reap
}
--enable_query_log
--connection default
DROP TABLE t1;
# Close connections used in many subtests
--disconnect reader
--disconnect locker
--disconnect writer
# End of 5.0 tests
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/mysqlbinlog.test
View file @ 7c4e55cb
......@@ -103,7 +103,7 @@ select "--- --position --" as "";
--replace_regex /SQL_LOAD_MB-[0-9]-[0-9]/SQL_LOAD_MB-#-#/
--exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --read-from-remote-server --position=231 --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000002
# Bug#7853 (mysqlbinlog does not accept input from stdin)
# Bug#7853 mysqlbinlog does not accept input from stdin
--disable_query_log
select "--- reading stdin --" as "";
--enable_query_log
......@@ -117,7 +117,7 @@ select "--- reading stdin --" as "";
drop table t1,t2;
#
#BUG#14157: utf8 encoding in binlog without set character_set_client
# Bug#14157 utf8 encoding in binlog without set character_set_client
#
flush logs;
--write_file $MYSQLTEST_VARDIR/tmp/bug14157.sql
......@@ -174,7 +174,6 @@ flush logs;
call p1();
drop procedure p1;
--error ER_SP_DOES_NOT_EXIST
call p1();
--replace_regex /SQL_LOAD_MB-[0-9]-[0-9]/SQL_LOAD_MB-#-#/
--exec $MYSQL_BINLOG --short-form $MYSQLTEST_VARDIR/log/master-bin.000007
......@@ -222,9 +221,9 @@ flush logs;
CREATE TABLE t1 (c1 CHAR(10));
# we need this for getting fixed timestamps inside of this test
flush logs;
FLUSH LOGS;
INSERT INTO t1 VALUES ('0123456789');
flush logs;
FLUSH LOGS;
DROP TABLE t1;
# We create a table, patch, and load the output into it
......@@ -233,10 +232,10 @@ DROP TABLE t1;
# as described in the original bug
--disable_query_log
CREATE TABLE patch (a blob);
CREATE TABLE patch (a BLOB);
--exec $MYSQL_BINLOG --hexdump --local-load=$MYSQLTEST_VARDIR/tmp/ $MYSQLTEST_VARDIR/log/master-bin.000011 > $MYSQLTEST_VARDIR/tmp/mysqlbinlog_tmp.dat
eval LOAD DATA LOCAL INFILE '$MYSQLTEST_VARDIR/tmp/mysqlbinlog_tmp.dat'
INTO TABLE patch FIELDS TERMINATED by '' LINES STARTING BY '#';
INTO TABLE patch FIELDS TERMINATED BY '' LINES STARTING BY '#';
--remove_file $MYSQLTEST_VARDIR/tmp/mysqlbinlog_tmp.dat
--enable_query_log
......@@ -248,49 +247,51 @@ SELECT COUNT(*) AS `BUG#28293_expect_1` FROM patch WHERE a LIKE '%Query%';
DROP TABLE patch;
#
# Bug #29928: incorrect connection_id() restoring from mysqlbinlog out
# Bug#29928 incorrect connection_id() restoring from mysqlbinlog out
#
flush logs;
create table t1(a int);
insert into t1 values(connection_id());
let $a= `select a from t1`;
flush logs;
FLUSH LOGS;
CREATE TABLE t1(a INT);
INSERT INTO t1 VALUES(connection_id());
let $a= `SELECT a FROM t1`;
FLUSH LOGS;
--exec $MYSQL_BINLOG $MYSQLTEST_VARDIR/log/master-bin.000013 > $MYSQLTEST_VARDIR/tmp/bug29928.sql
drop table t1;
DROP TABLE t1;
connect (con1, localhost, root, , test);
connection con1;
--exec $MYSQL test < $MYSQLTEST_VARDIR/tmp/bug29928.sql
--remove_file $MYSQLTEST_VARDIR/tmp/bug29928.sql
let $b= `select a from t1`;
let $b= `SELECT a FROM t1`;
disconnect con1;
connection default;
let $c= `select $a=$b`;
let $c= `SELECT $a=$b`;
--echo $c
drop table t1;
DROP TABLE t1;
echo shell> mysqlbinlog std_data/corrupt-relay-bin.000624 > var/tmp/bug31793.sql;
error 1;
exec $MYSQL_BINLOG $MYSQL_TEST_DIR/std_data/corrupt-relay-bin.000624 > $MYSQLTEST_VARDIR/tmp/bug31793.sql;
remove_file $MYSQLTEST_VARDIR/tmp/bug31793.sql;
#
# Bug #37313 BINLOG Contains Incorrect server id
# Bug#37313 BINLOG Contains Incorrect server id
#
let $save_server_id= `select @@global.server_id`;
let $s_id_max=`select (1 << 32) - 1`;
eval set @@global.server_id= $s_id_max;
let $binlog_file= $MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog;
let $save_server_id= `SELECT @@global.server_id`;
let $s_id_max= `SELECT (1 << 32) - 1`;
eval SET @@global.server_id= $s_id_max;
reset master;
flush logs;
--exec $MYSQL_BINLOG $MYSQLTEST_VARDIR/log/master-bin.000001 > $MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog
RESET MASTER;
FLUSH LOGS;
--exec $MYSQL_BINLOG $MYSQLTEST_VARDIR/log/master-bin.000001 > $binlog_file
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
eval select
(@a:=load_file("$MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog"))
is not null;
let $s_id_unsigned= `select @a like "%server id $s_id_max%" /* must return 1 */`;
eval SELECT
(@a:=LOAD_FILE("$binlog_file"))
IS NOT NULL;
let $s_id_unsigned= `SELECT @a LIKE "%server id $s_id_max%" /* must return 1 */`;
echo *** Unsigned server_id $s_id_max is found: $s_id_unsigned ***;
eval set @@global.server_id= $save_server_id;
--remove_file $MYSQLTEST_VARDIR/tmp/mysqlbinlog_bug37313.binlog
eval SET @@global.server_id= $save_server_id;
--remove_file $binlog_file
--echo End of 5.0 tests
mysql-test/t/mysqltest.test
View file @ 7c4e55cb
......@@ -6,6 +6,9 @@
# This test uses chmod, can't be run with root permissions
-- source include/not_as_root.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
# ============================================================================
#
# Test of mysqltest itself
......@@ -2154,3 +2157,5 @@ rmdir $MYSQLTEST_VARDIR/tmp/testdir;
--echo End of tests
# Wait till we reached the initial number of concurrent sessions
--source include/wait_until_count_sessions.inc
mysql-test/t/read_only.test
View file @ 7c4e55cb
......@@ -4,6 +4,9 @@
# should work with embedded server after mysqltest is fixed
-- source include/not_embedded.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--disable_warnings
DROP TABLE IF EXISTS t1,t2,t3;
--enable_warnings
......@@ -40,24 +43,24 @@ connection con1;
select @@global.read_only;
--error 1290
--error ER_OPTION_PREVENTS_STATEMENT
create table t3 (a int);
--error 1290
--error ER_OPTION_PREVENTS_STATEMENT
insert into t1 values(1);
# if a statement, after parse stage, looks like it will update a
# non-temp table, it will be rejected, even if at execution it would
# have turned out that 0 rows would be updated
--error 1290
--error ER_OPTION_PREVENTS_STATEMENT
update t1 set a=1 where 1=0;
# multi-update is special (see sql_parse.cc) so we test it
--error 1290
--error ER_OPTION_PREVENTS_STATEMENT
update t1,t2 set t1.a=t2.a+1 where t1.a=t2.a;
# check multi-delete to be sure
--error 1290
--error ER_OPTION_PREVENTS_STATEMENT
delete t1,t2 from t1,t2 where t1.a=t2.a;
# With temp tables updates should be accepted:
......@@ -71,7 +74,7 @@ insert into t3 values(1);
insert into t4 select * from t3;
# a non-temp table updated:
--error 1290
--error ER_OPTION_PREVENTS_STATEMENT
update t1,t3 set t1.a=t3.a+1 where t1.a=t3.a;
# no non-temp table updated (just swapped):
......@@ -79,7 +82,7 @@ update t1,t3 set t3.a=t1.a+1 where t1.a=t3.a;
update t4,t3 set t4.a=t3.a+1 where t4.a=t3.a;
--error 1290
--error ER_OPTION_PREVENTS_STATEMENT
delete t1 from t1,t3 where t1.a=t3.a;
delete t3 from t1,t3 where t1.a=t3.a;
......@@ -98,11 +101,11 @@ delete t1 from t1,t3 where t1.a=t3.a;
drop table t1;
--error 1290
--error ER_OPTION_PREVENTS_STATEMENT
insert into t1 values(1);
#
# BUG #22077 "DROP TEMPORARY TABLE fails with wrong error if read_only is set"
# Bug#22077 DROP TEMPORARY TABLE fails with wrong error if read_only is set
#
# check if DROP TEMPORARY on a non-existing temporary table returns the right
# error
......@@ -114,11 +117,12 @@ drop temporary table ttt;
drop temporary table if exists ttt;
connection default;
disconnect con1;
drop table t1,t2;
drop user test@localhost;
--echo #
--echo # Bug #27440 read_only allows create and drop database
--echo # Bug#27440 read_only allows create and drop database
--echo #
--disable_warnings
drop database if exists mysqltest_db1;
......@@ -151,3 +155,7 @@ delete from mysql.columns_priv where User like 'mysqltest_%';
flush privileges;
drop database mysqltest_db1;
set global read_only=0;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/show_check.test
View file @ 7c4e55cb
# Uses GRANT commands that usually disabled in embedded server
-- source include/not_embedded.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
#
# Test of some show commands
#
......@@ -33,7 +36,7 @@ check table t1 medium;
check table t1 extended;
show index from t1;
--disable_metadata
--error 1062
--error ER_DUP_ENTRY
insert into t1 values (5,5,5);
--echo -- Here we enable metadata just to check that the collation of the
......@@ -191,14 +194,14 @@ show columns from t1;
drop table t1;
#
# Test for Bug #2593 "SHOW CREATE TABLE doesn't properly double quotes"
# Test for Bug#2593 SHOW CREATE TABLE doesn't properly double quotes
#
SET @old_sql_mode= @@sql_mode, sql_mode= '';
SET @old_sql_quote_show_create= @@sql_quote_show_create, sql_quote_show_create= OFF;
######### hook for WL#1324 #
--error 1103
--error ER_WRONG_TABLE_NAME
CREATE TABLE `a/b` (i INT);
# the above test should WORK when WL#1324 is done,
# it should be removed and
......@@ -224,7 +227,7 @@ CREATE TABLE `a/b` (i INT);
#SHOW CREATE TABLE """a";
#DROP TABLE """a";
#
#Bug #4374 SHOW TABLE STATUS FROM ignores collation_connection
#Bug#4374 SHOW TABLE STATUS FROM ignores collation_connection
#set names latin1;
#create database ``;
#create table ``.`` (a int) engine=heap;
......@@ -252,7 +255,7 @@ SET sql_quote_show_create= @old_sql_quote_show_create;
SET sql_mode= @old_sql_mode;
#
# Test for bug #2719 "Heap tables status shows wrong or missing data."
# Test for Bug#2719 Heap tables status shows wrong or missing data.
#
select @@max_heap_table_size;
......@@ -313,7 +316,7 @@ show table status;
drop table t1, t2, t3;
#
# Test for bug #3342 SHOW CREATE DATABASE seems to require DROP privilege
# Test for Bug#3342 SHOW CREATE DATABASE seems to require DROP privilege
#
create database mysqltest;
......@@ -328,30 +331,33 @@ connect (con1,localhost,mysqltest_1,,mysqltest);
connection con1;
select * from t1;
show create database mysqltest;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
drop table t1;
--error 1044
--error ER_DBACCESS_DENIED_ERROR
drop database mysqltest;
disconnect con1;
connect (con2,localhost,mysqltest_2,,test);
connection con2;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
select * from mysqltest.t1;
--error 1044
--error ER_DBACCESS_DENIED_ERROR
show create database mysqltest;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
drop table mysqltest.t1;
--error 1044
--error ER_DBACCESS_DENIED_ERROR
drop database mysqltest;
disconnect con2;
connect (con3,localhost,mysqltest_3,,test);
connection con3;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
select * from mysqltest.t1;
--error 1044
--error ER_DBACCESS_DENIED_ERROR
show create database mysqltest;
drop table mysqltest.t1;
drop database mysqltest;
disconnect con3;
connection default;
set names binary;
......@@ -371,7 +377,7 @@ flush privileges;
#drop database ``;
# Test that USING <keytype> is always shown in SHOW CREATE TABLE when it was
# specified during table creation, but not otherwise. (Bug #7235)
# specified during table creation, but not otherwise. (Bug#7235)
CREATE TABLE t1 (i int, KEY (i)) ENGINE=MEMORY;
SHOW CREATE TABLE t1;
DROP TABLE t1;
......@@ -402,7 +408,7 @@ ALTER TABLE t1 ENGINE=MEMORY;
SHOW CREATE TABLE t1;
DROP TABLE t1;
# Test for BUG#9439 "Reporting wrong datatype for sub_part on show index"
# Test for Bug#9439 Reporting wrong datatype for sub_part on show index
CREATE TABLE t1(
field1 text NOT NULL,
PRIMARY KEY(field1(1000))
......@@ -412,7 +418,7 @@ show index from t1;
--disable_metadata
drop table t1;
# Test for BUG#11635: mysqldump exports TYPE instead of USING for HASH
# Test for Bug#11635 mysqldump exports TYPE instead of USING for HASH
create table t1 (
c1 int NOT NULL,
c2 int NOT NULL,
......@@ -422,7 +428,7 @@ create table t1 (
SHOW CREATE TABLE t1;
DROP TABLE t1;
# Test for BUG#93: 4.1 protocl crash on corupted frm and SHOW TABLE STATUS
# Test for Bug#93 4.1 protocl crash on corupted frm and SHOW TABLE STATUS
flush tables;
......@@ -430,7 +436,7 @@ flush tables;
system echo "this is a junk file for test" >> $MYSQLTEST_VARDIR/master-data/test/t1.frm ;
--replace_column 6 # 7 # 8 # 9 #
SHOW TABLE STATUS like 't1';
--error 1033
--error ER_NOT_FORM_FILE
show create table t1;
drop table t1;
......@@ -438,7 +444,7 @@ drop table t1;
--echo End of 4.1 tests
#
# BUG 12183 - SHOW OPEN TABLES behavior doesn't match grammar
# Bug#12183 SHOW OPEN TABLES behavior doesn't match grammar
# First we close all open tables with FLUSH tables and then we open some.
CREATE TABLE txt1(a int);
CREATE TABLE tyt2(a int);
......@@ -456,14 +462,14 @@ DROP TABLE txt1;
DROP TABLE tyt2;
DROP TABLE urkunde;
#
# BUG #12591 (SHOW TABLES FROM dbname produces wrong error message)
# Bug#12591 SHOW TABLES FROM dbname produces wrong error message
#
--error 1049
--error ER_BAD_DB_ERROR
SHOW TABLES FROM non_existing_database;
#
# Bug#17203: "sql_no_cache sql_cache" in views created from prepared
# Bug#17203 "sql_no_cache sql_cache" in views created from prepared
# statement
#
# The problem was that initial user setting was forgotten, and current
......@@ -543,7 +549,7 @@ SHOW COLUMNS FROM no_such_table;
#
# Bug #19764: SHOW commands end up in the slow log as table scans
# Bug#19764 SHOW commands end up in the slow log as table scans
#
flush status;
show status like 'slow_queries';
......@@ -555,7 +561,7 @@ select 1 from information_schema.tables limit 1;
show status like 'slow_queries';
#
# BUG#10491: Server returns data as charset binary SHOW CREATE TABLE or SELECT
# BUG#10491 Server returns data as charset binary SHOW CREATE TABLE or SELECT
# FROM I_S.
#
......@@ -827,7 +833,7 @@ DROP DATABASE mysqltest1;
use test;
#
# Bug #28808: log_queries_not_using_indexes variable dynamic change is ignored
# Bug#28808 log_queries_not_using_indexes variable dynamic change is ignored
#
flush status;
show variables like "log_queries_not_using_indexes";
......@@ -843,7 +849,7 @@ select 1 from information_schema.tables limit 1;
show status like 'slow_queries';
#
# Bug #30088: Can't disable myisam-recover by a value of ""
# Bug#30088 Can't disable myisam-recover by a value of ""
#
show variables like 'myisam_recover_options';
......@@ -868,3 +874,7 @@ show create table t1;
drop table t1;
--echo End of 5.0 tests
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/skip_name_resolve.test
View file @ 7c4e55cb
# Can't be tested with embedded server
-- source include/not_embedded.inc
--source include/not_embedded.inc
# Bug #8471: IP address with mask fail when skip-name-resolve is on
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
# Bug#8471 IP address with mask fail when skip-name-resolve is on
GRANT ALL ON test.* TO mysqltest_1@'127.0.0.1/255.255.255.255';
SHOW GRANTS FOR mysqltest_1@'127.0.0.1/255.255.255.255';
REVOKE ALL ON test.* FROM mysqltest_1@'127.0.0.1/255.255.255.255';
......@@ -9,12 +12,17 @@ DROP USER mysqltest_1@'127.0.0.1/255.255.255.255';
# End of 4.1 tests
# Bug #13407 "Remote connecting crashes server".
# Bug#13407 Remote connecting crashes server
# Server crashed when one used USER() function in connection for which
# was impossible to obtain peer hostname.
connect (con1, 127.0.0.1, root, , test, $MASTER_MYPORT, );
--replace_column 1 #
select user();
SELECT USER();
--replace_column 1 <id> 3 <host> 5 <command> 6 <time> 7 <state> 8 <info>
show processlist;
SHOW PROCESSLIST;
connection default;
disconnect con1;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/sp-security.test
View file @ 7c4e55cb
......@@ -5,6 +5,9 @@
# Can't test with embedded server that doesn't support grants
-- source include/not_embedded.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
connect (con1root,localhost,root,,);
connection con1root;
......@@ -156,7 +159,7 @@ call db1_secret.stamp(6);
select db1_secret.db();
#
# BUG#2777
# Bug#2777 Stored procedure doesn't observe definer's rights
#
connection con1root;
......@@ -215,7 +218,7 @@ call q();
select * from t2;
#
# BUG#6030: Stored procedure has no appropriate DROP privilege
# Bug#6030 Stored procedure has no appropriate DROP privilege
# (or ALTER for that matter)
# still connection con2user1 in db2
......@@ -330,7 +333,7 @@ flush privileges;
drop table t1;
#
# BUG#9503: reseting correct parameters of thread after error in SP function
# Bug#9503 reseting correct parameters of thread after error in SP function
#
connect (root,localhost,root,,test);
connection root;
......@@ -366,10 +369,12 @@ REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1@localhost;
drop function bug_9503;
use test;
drop database mysqltest;
connection default;
disconnect root;
#
# correct value from current_user() in function run from "security definer"
# (BUG#7291)
# (Bug#7291 Stored procedures: wrong CURRENT_USER value)
#
connection con1root;
use test;
......@@ -398,7 +403,7 @@ REVOKE ALL PRIVILEGES, GRANT OPTION FROM user1@localhost;
drop user user1@localhost;
#
# Bug #12318: Wrong error message when accessing an inaccessible stored
# Bug#12318 Wrong error message when accessing an inaccessible stored
# procedure in another database when the current database is
# information_schema.
#
......@@ -438,7 +443,7 @@ revoke usage on *.* from mysqltest_1@localhost;
drop user mysqltest_1@localhost;
#
# BUG#12812 create view calling a function works without execute right
# Bug#12812 create view calling a function works without execute right
# on function
delimiter |;
--disable_warnings
......@@ -464,7 +469,7 @@ delimiter ;|
#
# BUG#14834: Server denies to execute Stored Procedure
# Bug#14834 Server denies to execute Stored Procedure
#
# The problem here was with '_' in the database name.
#
......@@ -507,7 +512,7 @@ drop database db_bug14834;
#
# BUG#14533: 'desc tbl' in stored procedure causes error
# Bug#14533 'desc tbl' in stored procedure causes error
# ER_TABLEACCESS_DENIED_ERROR
#
create database db_bug14533;
......@@ -546,13 +551,13 @@ drop database db_bug14533;
#
# BUG#7787: Stored procedures: improper warning for "grant execute" statement
# Bug#7787 Stored procedures: improper warning for "grant execute" statement
#
# Prepare.
CREATE DATABASE db_bug7787;
use db_bug7787;
USE db_bug7787;
# Test.
......@@ -569,7 +574,7 @@ use test;
#
# WL#2897: Complete definer support in the stored routines.
# WL#2897 Complete definer support in the stored routines.
#
# The following cases are tested:
# 1. check that if DEFINER-clause is not explicitly specified, stored routines
......@@ -614,7 +619,7 @@ GRANT ALL PRIVILEGES ON mysqltest.* TO mysqltest_2@localhost;
--echo ---> connection: mysqltest_2_con
--connection mysqltest_2_con
use mysqltest;
USE mysqltest;
CREATE PROCEDURE wl2897_p1() SELECT 1;
......@@ -626,7 +631,7 @@ CREATE FUNCTION wl2897_f1() RETURNS INT RETURN 1;
--echo ---> connection: mysqltest_1_con
--connection mysqltest_1_con
use mysqltest;
USE mysqltest;
--error ER_SPECIFIC_ACCESS_DENIED_ERROR
CREATE DEFINER=root@localhost PROCEDURE wl2897_p2() SELECT 2;
......@@ -652,7 +657,7 @@ CREATE DEFINER='a @ b @ c'@localhost FUNCTION wl2897_f3() RETURNS INT RETURN 3;
--echo ---> connection: con1root
--connection con1root
use mysqltest;
USE mysqltest;
SHOW CREATE PROCEDURE wl2897_p1;
SHOW CREATE PROCEDURE wl2897_p3;
......@@ -672,7 +677,7 @@ DROP DATABASE mysqltest;
#
# BUG#13198: SP executes if definer does not exist
# Bug#13198 SP executes if definer does not exist
#
# Prepare environment.
......@@ -702,7 +707,7 @@ GRANT ALL PRIVILEGES ON mysqltest.* TO mysqltest_2@localhost;
--echo ---> connection: mysqltest_1_con
--connection mysqltest_1_con
use mysqltest;
USE mysqltest;
CREATE PROCEDURE bug13198_p1()
SELECT 1;
......@@ -720,7 +725,7 @@ SELECT bug13198_f1();
--echo ---> connection: mysqltest_2_con
--connection mysqltest_2_con
use mysqltest;
USE mysqltest;
CALL bug13198_p1();
......@@ -742,7 +747,7 @@ DROP USER mysqltest_1@localhost;
--echo ---> connection: mysqltest_2_con
--connection mysqltest_2_con
use mysqltest;
USE mysqltest;
--error ER_NO_SUCH_USER
CALL bug13198_p1();
......@@ -764,7 +769,7 @@ DROP DATABASE mysqltest;
#
# Bug#19857 - When a user with CREATE ROUTINE priv creates a routine,
# Bug#19857 When a user with CREATE ROUTINE priv creates a routine,
# it results in NULL p/w
#
......@@ -780,7 +785,7 @@ SELECT Host,User,Password FROM mysql.user WHERE User='user19857';
--echo ---> connection: mysqltest_2_con
--connection mysqltest_2_con
use test;
USE test;
DELIMITER //;
CREATE PROCEDURE sp19857() DETERMINISTIC
......@@ -814,8 +819,7 @@ DROP USER user19857@localhost;
#
# BUG#18630: Arguments of suid routine calculated in wrong security
# context
# Bug#18630 Arguments of suid routine calculated in wrong security context
#
# Arguments of suid routines were calculated in definer's security
# context instead of caller's context thus creating security hole.
......@@ -886,3 +890,7 @@ DROP FUNCTION f_suid;
DROP TABLE t1;
--echo End of 5.0 tests.
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/sp_notembedded.test
View file @ 7c4e55cb
# Can't test with embedded server
-- source include/not_embedded.inc
--sleep 2
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--disable_warnings
drop table if exists t1,t3;
--enable_warnings
delimiter |;
#
# BUG#4902: Stored procedure with SHOW WARNINGS leads to packet error
# Bug#4902: Stored procedure with SHOW WARNINGS leads to packet error
#
# Added tests for show grants command
--disable_warnings
......@@ -47,7 +50,7 @@ drop procedure bug4902_2|
#
# BUG#5278: Stored procedure packets out of order if SET PASSWORD.
# Bug#5278: Stored procedure packets out of order if SET PASSWORD.
#
--disable_warnings
drop function if exists bug5278|
......@@ -58,13 +61,16 @@ begin
return 'okay';
end|
--error 1133
--error ER_PASSWORD_NO_MATCH
select bug5278()|
--error 1133
--error ER_PASSWORD_NO_MATCH
select bug5278()|
drop function bug5278|
#
# Bug#3583: query cache doesn't work for stored procedures
#
--disable_warnings
drop table if exists t1|
--enable_warnings
......@@ -72,9 +78,6 @@ create table t1 (
id char(16) not null default '',
data int not null
)|
#
# BUG#3583: query cache doesn't work for stored procedures
#
--disable_warnings
drop procedure if exists bug3583|
--enable_warnings
......@@ -110,8 +113,9 @@ delete from t1|
drop procedure bug3583|
drop table t1|
#
# BUG#6807: Stored procedure crash if CREATE PROCEDURE ... KILL QUERY
# Bug#6807: Stored procedure crash if CREATE PROCEDURE ... KILL QUERY
#
--disable_warnings
drop procedure if exists bug6807|
......@@ -125,16 +129,16 @@ begin
select 'Not reached';
end|
--error 1317
--error ER_QUERY_INTERRUPTED
call bug6807()|
--error 1317
--error ER_QUERY_INTERRUPTED
call bug6807()|
drop procedure bug6807|
#
# BUG#10100: function (and stored procedure?) recursivity problem
# Bug#10100: function (and stored procedure?) recursivity problem
#
--disable_warnings
drop function if exists bug10100f|
......@@ -233,11 +237,11 @@ begin
close c;
end|
#end of the stack checking
# end of the stack checking
set @@max_sp_recursion_depth=255|
set @var=1|
#disable log because error about stack overrun contains numbers which
#depend on a system
# disable log because error about stack overrun contains numbers which
# depend on a system
-- disable_result_log
-- error ER_STACK_OVERRUN_NEED_MORE
call bug10100p(255, @var)|
......@@ -266,6 +270,7 @@ drop table t3|
delimiter ;|
#
# Bug#15298 SHOW GRANTS FOR CURRENT_USER: Incorrect output in DEFINER context
#
......@@ -282,6 +287,11 @@ call 15298_1();
call 15298_2();
connection default;
disconnect con1;
drop user mysqltest_1@localhost;
drop procedure 15298_1;
drop procedure 15298_2;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/ssl-big.test
View file @ 7c4e55cb
......@@ -4,12 +4,15 @@
-- source include/have_ssl.inc
-- source include/big_test.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--disable_warnings
DROP TABLE IF EXISTS t1, t2;
--enable_warnings
#
# Bug #29579 Clients using SSL can hang the server
# Bug#29579 Clients using SSL can hang the server
#
connect (ssl_con,localhost,root,,,,,SSL);
......@@ -53,4 +56,9 @@ while ($count)
connect (ssl_con,localhost,root,,,,,SSL);
drop table t1;
connection default;
disconnect ssl_con;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/ssl.test
View file @ 7c4e55cb
......@@ -3,6 +3,9 @@
-- source include/have_ssl.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
connect (ssl_con,localhost,root,,,,,SSL);
# Check ssl turned on
......@@ -14,4 +17,9 @@ SHOW STATUS LIKE 'Ssl_cipher';
# Check ssl turned on
SHOW STATUS LIKE 'Ssl_cipher';
connection default;
disconnect ssl_con;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/ssl_compress.test
View file @ 7c4e55cb
......@@ -4,6 +4,9 @@
-- source include/have_ssl.inc
-- source include/have_compress.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
connect (ssl_compress_con,localhost,root,,,,,SSL COMPRESS);
# Check ssl turned on
......@@ -20,3 +23,10 @@ SHOW STATUS LIKE 'Ssl_cipher';
# Check compression turned on
SHOW STATUS LIKE 'Compression';
connection default;
disconnect ssl_compress_con;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/status.test
View file @ 7c4e55cb
# embedded server causes different stat
-- source include/not_embedded.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
# PS causes different statistics
--disable_ps_protocol
......@@ -208,3 +211,7 @@ DROP PROCEDURE p1;
DROP FUNCTION f1;
# End of 5.0 tests
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/user_limits.test
View file @ 7c4e55cb
......@@ -3,7 +3,10 @@
#
# Requires privileges to be enabled
-- source include/not_embedded.inc
--source include/not_embedded.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
# Prepare play-ground
--disable_warnings
......@@ -28,11 +31,11 @@ connect (mqph, localhost, mysqltest_1,,);
connection mqph;
select * from t1;
select * from t1;
--error 1226
--error ER_USER_LIMIT_REACHED
select * from t1;
connect (mqph2, localhost, mysqltest_1,,);
connection mqph2;
--error 1226
--error ER_USER_LIMIT_REACHED
select * from t1;
# cleanup
connection default;
......@@ -50,12 +53,12 @@ select * from t1;
select * from t1;
delete from t1;
delete from t1;
--error 1226
--error ER_USER_LIMIT_REACHED
delete from t1;
select * from t1;
connect (muph2, localhost, mysqltest_1,,);
connection muph2;
--error 1226
--error ER_USER_LIMIT_REACHED
delete from t1;
select * from t1;
# Cleanup
......@@ -74,7 +77,7 @@ connect (mcph2, localhost, mysqltest_1,,);
connection mcph2;
select * from t1;
--replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
--error 1226
--error ER_USER_LIMIT_REACHED
connect (mcph3, localhost, mysqltest_1,,);
# Old connection is still ok
select * from t1;
......@@ -83,7 +86,7 @@ select * from t1;
disconnect mcph1;
disconnect mcph2;
--replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
--error 1226
--error ER_USER_LIMIT_REACHED
connect (mcph3, localhost, mysqltest_1,,);
# Cleanup
connection default;
......@@ -101,7 +104,7 @@ connect (muc2, localhost, mysqltest_1,,);
connection muc2;
select * from t1;
--replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
--error 1226
--error ER_USER_LIMIT_REACHED
connect (muc3, localhost, mysqltest_1,,);
# Closing of one of connections should help
disconnect muc1;
......@@ -115,7 +118,7 @@ connect (muc4, localhost, mysqltest_1,,);
connection muc4;
select * from t1;
--replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
--error 1226
--error ER_USER_LIMIT_REACHED
connect (muc5, localhost, mysqltest_1,,);
# Clean up
connection default;
......@@ -129,7 +132,7 @@ drop user mysqltest_1@localhost;
select @@session.max_user_connections, @@global.max_user_connections;
# Local max_user_connections variable can't be set directly
# since this limit is per-account
--error 1229
--error ER_GLOBAL_VARIABLE
set session max_user_connections= 2;
# But it is ok to set global max_user_connections
set global max_user_connections= 2;
......@@ -144,7 +147,7 @@ connect (muca2, localhost, mysqltest_1,,);
connection muca2;
select * from t1;
--replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
--error 1203
--error ER_TOO_MANY_USER_CONNECTIONS
connect (muca3, localhost, mysqltest_1,,);
# Now we are testing that per-account limit prevails over gloabl limit
connection default;
......@@ -154,7 +157,7 @@ connect (muca3, localhost, mysqltest_1,,);
connection muca3;
select @@session.max_user_connections, @@global.max_user_connections;
--replace_result $MASTER_MYPORT MYSQL_PORT $MASTER_MYSOCK MYSQL_SOCK
--error 1226
--error ER_USER_LIMIT_REACHED
connect (muca4, localhost, mysqltest_1,,);
# Cleanup
connection default;
......@@ -167,3 +170,7 @@ drop user mysqltest_1@localhost;
# Final cleanup
drop table t1;
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
mysql-test/t/view.test
View file @ 7c4e55cb
......@@ -10,12 +10,12 @@ use test;
#
# create view on nonexistent table
-- error 1146
-- error ER_NO_SUCH_TABLE
create view v1 (c,d) as select a,b from t1;
create temporary table t1 (a int, b int);
# view on temporary table
-- error 1352
-- error ER_VIEW_SELECT_TMPTABLE
create view v1 (c) as select b+1 from t1;
drop table t1;
......@@ -42,18 +42,18 @@ select * from t1;
select c from v1;
show create table v1;
show create view v1;
-- error 1347
-- error ER_WRONG_OBJECT
show create view t1;
drop table t1;
# try to use fields from underlying table
-- error 1054
-- error ER_BAD_FIELD_ERROR
select a from v1;
-- error 1054
-- error ER_BAD_FIELD_ERROR
select v1.a from v1;
-- error 1054
-- error ER_BAD_FIELD_ERROR
select b from v1;
-- error 1054
-- error ER_BAD_FIELD_ERROR
select v1.b from v1;
# view with different algorithms (explain output differs)
......@@ -64,9 +64,9 @@ select c from v2;
explain extended select c from v2;
# try to use underlying table fields in VIEW creation process
-- error 1054
-- error ER_BAD_FIELD_ERROR
create view v3 (c) as select a+1 from v1;
-- error 1054
-- error ER_BAD_FIELD_ERROR
create view v3 (c) as select b+1 from v1;
......@@ -104,7 +104,7 @@ select * from v1;
select * from v2;
# try to create VIEW with name of existing VIEW
-- error 1050
-- error ER_TABLE_EXISTS_ERROR
create view v1 (c,d,e,f) as select a,b, a in (select a+2 from t1), a = all (select a from t1) from t1;
# 'or replace' should work in this case
......@@ -112,7 +112,7 @@ create or replace view v1 (c,d,e,f) as select a,b, a in (select a+2 from t1), a
# try to ALTER unexisting VIEW
drop view v2;
-- error 1146
-- error ER_NO_SUCH_TABLE
alter view v2 as select c, d from v1;
# 'or replace' on unexisting view
......@@ -126,15 +126,15 @@ select * from v1;
select * from v2;
# try to drop nonexistent VIEW
-- error 1051
-- error ER_BAD_TABLE_ERROR
drop view v100;
# try to drop table with DROP VIEW
-- error 1347
-- error ER_WRONG_OBJECT
drop view t1;
# try to drop VIEW with DROP TABLE
-- error 1051
-- error ER_BAD_TABLE_ERROR
drop table v1;
# try to drop table with DROP VIEW
......@@ -175,7 +175,7 @@ drop table t1;
# syntax compatibility
#
create table t1 (a int);
-- error 1368
-- error ER_VIEW_NONUPD_CHECK
create view v1 as select distinct a from t1 WITH CHECK OPTION;
create view v1 as select a from t1 WITH CHECK OPTION;
create view v2 as select a from t1 WITH CASCADED CHECK OPTION;
......@@ -232,10 +232,10 @@ create algorithm=temptable view v2 (a,c) as select a, b+1 from t1;
select is_updatable from information_schema.views where table_name='v2';
select is_updatable from information_schema.views where table_name='v1';
# try to update expression
-- error 1348
-- error ER_NONUPDATEABLE_COLUMN
update v1 set c=a+c;
# try to update VIEW with forced TEMPORARY TABLE algorithm
-- error 1288
-- error ER_NON_UPDATABLE_TABLE
update v2 set a=a+c;
# updatable field of updateable view
update v1 set a=a+c;
......@@ -254,10 +254,10 @@ insert into t2 values (10), (20);
create view v1 (a,c) as select a, b+1 from t1;
create algorithm=temptable view v2 (a,c) as select a, b+1 from t1;
# try to update expression
-- error 1348
-- error ER_NONUPDATEABLE_COLUMN
update t2,v1 set v1.c=v1.a+v1.c where t2.x=v1.a;
# try to update VIEW with forced TEMPORARY TABLE algorithm
-- error 1288
-- error ER_NON_UPDATABLE_TABLE
update t2,v2 set v2.a=v2.v2.a+c where t2.x=v2.a;
# updatable field of updateable view
update t2,v1 set v1.a=v1.a+v1.c where t2.x=v1.a;
......@@ -292,7 +292,7 @@ insert into t1 values (1,2), (2,3), (3,4), (4,5), (5,10);
create view v1 (a,c) as select a, b+1 from t1;
create algorithm=temptable view v2 (a,c) as select a, b+1 from t1;
# try to update VIEW with forced TEMPORARY TABLE algorithm
-- error 1288
-- error ER_NON_UPDATABLE_TABLE
delete from v2 where c < 4;
# updatable field of updateable view
delete from v1 where c < 4;
......@@ -311,7 +311,7 @@ insert into t2 values (1), (2), (3), (4);
create view v1 (a,c) as select a, b+1 from t1;
create algorithm=temptable view v2 (a,c) as select a, b+1 from t1;
# try to update VIEW with forced TEMPORARY TABLE algorithm
-- error 1288
-- error ER_NON_UPDATABLE_TABLE
delete v2 from t2,v2 where t2.x=v2.a;
# updatable field of updateable view
delete v1 from t2,v1 where t2.x=v1.a;
......@@ -331,7 +331,7 @@ set updatable_views_with_limit=NO;
update v1 set x=x+1;
update v2 set x=x+1;
update v1 set x=x+1 limit 1;
-- error 1288
-- error ER_NON_UPDATABLE_TABLE
update v2 set x=x+1 limit 1;
set updatable_views_with_limit=YES;
update v1 set x=x+1 limit 1;
......@@ -353,13 +353,13 @@ create view v3 (x,y,z) as select b, a, b from t1;
create view v4 (x,y,z) as select c+1, b, a from t1;
create algorithm=temptable view v5 (x,y,z) as select c, b, a from t1;
# try insert to VIEW with fields duplicate
-- error 1471
-- error ER_NON_INSERTABLE_TABLE
insert into v3 values (-60,4,30);
# try insert to VIEW with expression in SELECT list
-- error 1471
-- error ER_NON_INSERTABLE_TABLE
insert into v4 values (-60,4,30);
# try insert to VIEW using temporary table algorithm
-- error 1471
-- error ER_NON_INSERTABLE_TABLE
insert into v5 values (-60,4,30);
insert into v1 values (-60,4,30);
insert into v1 (z,y,x) values (50,6,-100);
......@@ -381,13 +381,13 @@ create view v3 (x,y,z) as select b, a, b from t1;
create view v4 (x,y,z) as select c+1, b, a from t1;
create algorithm=temptable view v5 (x,y,z) as select c, b, a from t1;
# try insert to VIEW with fields duplicate
-- error 1471
-- error ER_NON_INSERTABLE_TABLE
insert into v3 select c, b, a from t2;
# try insert to VIEW with expression in SELECT list
-- error 1471
-- error ER_NON_INSERTABLE_TABLE
insert into v4 select c, b, a from t2;
# try insert to VIEW using temporary table algorithm
-- error 1471
-- error ER_NON_INSERTABLE_TABLE
insert into v5 select c, b, a from t2;
insert into v1 select c, b, a from t2;
insert into v1 (z,y,x) select a+20,b+2,-100 from t2;
......@@ -424,7 +424,7 @@ create table t1 (a int, primary key(a));
insert into t1 values (1), (2), (3), (200);
create ALGORITHM=TEMPTABLE view v1 (x) as select a from t1;
create view v2 (y) as select x from v1;
-- error 1288
-- error ER_NON_UPDATABLE_TABLE
update v2 set y=10 where y=2;
drop table t1;
drop view v1,v2;
......@@ -479,17 +479,17 @@ create table t1 (col1 char(5),col2 char(5));
create view v1 as select * from t1;
drop table t1;
create table t1 (col1 char(5),newcol2 char(5));
-- error 1356
-- error ER_VIEW_INVALID
insert into v1 values('a','aa');
drop table t1;
-- error 1356
-- error ER_VIEW_INVALID
select * from v1;
drop view v1;
#
# check of duplication of column names
#
-- error 1060
-- error ER_DUP_FIELDNAME
create view v1 (a,a) as select 'a','a';
#
......@@ -559,7 +559,7 @@ drop table t1;
#
# error on preparation
#
-- error 1096
-- error ER_NO_TABLES_USED
CREATE VIEW v02 AS SELECT * FROM DUAL;
SHOW TABLES;
......@@ -575,7 +575,7 @@ drop view v1;
#
create table t1 (col1 int,col2 char(22));
create view v1 as select * from t1;
-- error 1347
-- error ER_WRONG_OBJECT
create index i1 on v1 (col1);
drop view v1;
drop table t1;
......@@ -735,7 +735,7 @@ create function x1 () returns int return 5;
create table t1 (s1 int);
create view v1 as select x1() from t1;
drop function x1;
-- error 1356
-- error ER_VIEW_INVALID
select * from v1;
--replace_column 8 # 12 # 13 #
show table status;
......@@ -786,10 +786,10 @@ create table t1 (a int);
create view v1 as select a from t1;
create view v3 as select a from t1;
create database mysqltest;
-- error 1450
-- error ER_FORBID_SCHEMA_CHANGE
rename table v1 to mysqltest.v1;
rename table v1 to v2;
--error 1050
--error ER_TABLE_EXISTS_ERROR
rename table v3 to v1, v2 to t1;
drop table t1;
drop view v2,v3;
......@@ -802,19 +802,19 @@ create view v1 as select 'a',1;
create view v2 as select * from v1 union all select * from v1;
create view v3 as select * from v2 where 1 = (select `1` from v2);
create view v4 as select * from v3;
-- error 1242
-- error ER_SUBQUERY_NO_1_ROW
select * from v4;
drop view v4, v3, v2, v1;
#
# VIEW over SELECT with prohibited clauses
#
-- error 1350
-- error ER_VIEW_SELECT_CLAUSE
create view v1 as select 5 into @w;
-- error 1350
-- error ER_VIEW_SELECT_CLAUSE
create view v1 as select 5 into outfile 'ttt';
create table t1 (a int);
-- error 1350
-- error ER_VIEW_SELECT_CLAUSE
create view v1 as select a from t1 procedure analyse();
-- error ER_VIEW_SELECT_DERIVED
create view v1 as select 1 from (select 1) as d1;
......@@ -839,109 +839,109 @@ create table t2 (col1 int);
create view v1 as select * from t1;
create view v2 as select * from v1;
create view v3 as select v2.col1 from v2,t2 where v2.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update v2 set col1 = (select max(col1) from v1);
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update v2 set col1 = (select max(col1) from t1);
-- error 1093
-- error ER_UPDATE_TABLE_USED
update v2 set col1 = (select max(col1) from v2);
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update v2,t2 set v2.col1 = (select max(col1) from v1) where v2.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update t1,t2 set t1.col1 = (select max(col1) from v1) where t1.col1 = t2.col1;
-- error 1093
-- error ER_UPDATE_TABLE_USED
update v1,t2 set v1.col1 = (select max(col1) from v1) where v1.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update t2,v2 set v2.col1 = (select max(col1) from v1) where v2.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update t2,t1 set t1.col1 = (select max(col1) from v1) where t1.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update t2,v1 set v1.col1 = (select max(col1) from v1) where v1.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update v2,t2 set v2.col1 = (select max(col1) from t1) where v2.col1 = t2.col1;
-- error 1093
-- error ER_UPDATE_TABLE_USED
update t1,t2 set t1.col1 = (select max(col1) from t1) where t1.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update v1,t2 set v1.col1 = (select max(col1) from t1) where v1.col1 = t2.col1;
-- error 1093
-- error ER_UPDATE_TABLE_USED
update t2,v2 set v2.col1 = (select max(col1) from t1) where v2.col1 = t2.col1;
-- error 1093
-- error ER_UPDATE_TABLE_USED
update t2,t1 set t1.col1 = (select max(col1) from t1) where t1.col1 = t2.col1;
-- error 1093
-- error ER_UPDATE_TABLE_USED
update t2,v1 set v1.col1 = (select max(col1) from t1) where v1.col1 = t2.col1;
-- error 1093
-- error ER_UPDATE_TABLE_USED
update v2,t2 set v2.col1 = (select max(col1) from v2) where v2.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update t1,t2 set t1.col1 = (select max(col1) from v2) where t1.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update v1,t2 set v1.col1 = (select max(col1) from v2) where v1.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update t2,v2 set v2.col1 = (select max(col1) from v2) where v2.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update t2,t1 set t1.col1 = (select max(col1) from v2) where t1.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update t2,v1 set v1.col1 = (select max(col1) from v2) where v1.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update v3 set v3.col1 = (select max(col1) from v1);
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update v3 set v3.col1 = (select max(col1) from t1);
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update v3 set v3.col1 = (select max(col1) from v2);
-- error 1093
-- error ER_UPDATE_TABLE_USED
update v3 set v3.col1 = (select max(col1) from v3);
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
delete from v2 where col1 = (select max(col1) from v1);
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
delete from v2 where col1 = (select max(col1) from t1);
-- error 1093
-- error ER_UPDATE_TABLE_USED
delete from v2 where col1 = (select max(col1) from v2);
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
delete v2 from v2,t2 where (select max(col1) from v1) > 0 and v2.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
delete t1 from t1,t2 where (select max(col1) from v1) > 0 and t1.col1 = t2.col1;
-- error 1093
-- error ER_UPDATE_TABLE_USED
delete v1 from v1,t2 where (select max(col1) from v1) > 0 and v1.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
delete v2 from v2,t2 where (select max(col1) from t1) > 0 and v2.col1 = t2.col1;
-- error 1093
-- error ER_UPDATE_TABLE_USED
delete t1 from t1,t2 where (select max(col1) from t1) > 0 and t1.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
delete v1 from v1,t2 where (select max(col1) from t1) > 0 and v1.col1 = t2.col1;
-- error 1093
-- error ER_UPDATE_TABLE_USED
delete v2 from v2,t2 where (select max(col1) from v2) > 0 and v2.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
delete t1 from t1,t2 where (select max(col1) from v2) > 0 and t1.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
delete v1 from v1,t2 where (select max(col1) from v2) > 0 and v1.col1 = t2.col1;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
insert into v2 values ((select max(col1) from v1));
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
insert into t1 values ((select max(col1) from v1));
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
insert into v2 values ((select max(col1) from v1));
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
insert into v2 values ((select max(col1) from t1));
-- error 1093
-- error ER_UPDATE_TABLE_USED
insert into t1 values ((select max(col1) from t1));
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
insert into v2 values ((select max(col1) from t1));
-- error 1093
-- error ER_UPDATE_TABLE_USED
insert into v2 values ((select max(col1) from v2));
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
insert into t1 values ((select max(col1) from v2));
-- error 1093
-- error ER_UPDATE_TABLE_USED
insert into v2 values ((select max(col1) from v2));
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
insert into v3 (col1) values ((select max(col1) from v1));
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
insert into v3 (col1) values ((select max(col1) from t1));
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
insert into v3 (col1) values ((select max(col1) from v2));
#check with TZ tables in list
-- error 1443
# check with TZ tables in list
-- error ER_VIEW_PREVENT_UPDATE
insert into v3 (col1) values ((select CONVERT_TZ('20050101000000','UTC','MET') from v2));
insert into v3 (col1) values ((select CONVERT_TZ('20050101000000','UTC','MET') from t2));
-- error 1048
-- error ER_BAD_NULL_ERROR
insert into mysql.time_zone values ('', (select CONVERT_TZ('20050101000000','UTC','MET') from t2));
# temporary table algorithm view should be equal to subquery in the from clause
create algorithm=temptable view v4 as select * from t1;
......@@ -957,7 +957,7 @@ drop table t1,t2;
#
create table t1 (s1 int);
create view v1 as select * from t1;
-- error 1347
-- error ER_WRONG_OBJECT
handler v1 open as xx;
drop view v1;
drop table t1;
......@@ -1005,7 +1005,7 @@ create table t2 (a int);
create view v1 as select * from t1;
lock tables t1 read, v1 read;
select * from v1;
-- error 1100
-- error ER_TABLE_NOT_LOCKED
select * from t2;
drop view v1;
drop table t1, t2;
......@@ -1017,7 +1017,7 @@ create table t1 (a int);
create view v1 as select * from t1 where a < 2 with check option;
# simple insert
insert into v1 values(1);
-- error 1369
-- error ER_VIEW_CHECK_FAILED
insert into v1 values(3);
# simple insert with ignore
insert ignore into v1 values (2),(3),(0);
......@@ -1026,7 +1026,7 @@ select * from t1;
delete from t1;
# INSERT SELECT test
insert into v1 SELECT 1;
-- error 1369
-- error ER_VIEW_CHECK_FAILED
insert into v1 SELECT 3;
# prepare data for next check
create table t2 (a int);
......@@ -1034,9 +1034,9 @@ insert into t2 values (2),(3),(0);
# INSERT SELECT with ignore test
insert ignore into v1 SELECT a from t2;
select * from t1;
#simple UPDATE test
# simple UPDATE test
update v1 set a=-1 where a=0;
-- error 1369
-- error ER_VIEW_CHECK_FAILED
update v1 set a=2 where a=1;
select * from t1;
# prepare data for next check
......@@ -1063,12 +1063,12 @@ create view v2 as select * from v1 where a > 0 with local check option;
create view v3 as select * from v1 where a > 0 with cascaded check option;
insert into v2 values (1);
insert into v3 values (1);
-- error 1369
-- error ER_VIEW_CHECK_FAILED
insert into v2 values (0);
-- error 1369
-- error ER_VIEW_CHECK_FAILED
insert into v3 values (0);
insert into v2 values (2);
-- error 1369
-- error ER_VIEW_CHECK_FAILED
insert into v3 values (2);
select * from t1;
drop view v3,v2,v1;
......@@ -1080,7 +1080,7 @@ drop table t1;
create table t1 (a int, primary key (a));
create view v1 as select * from t1 where a < 2 with check option;
insert into v1 values (1) on duplicate key update a=2;
-- error 1369
-- error ER_VIEW_CHECK_FAILED
insert into v1 values (1) on duplicate key update a=2;
insert ignore into v1 values (1) on duplicate key update a=2;
select * from t1;
......@@ -1093,13 +1093,13 @@ drop table t1;
create table t1 (s1 int);
create view v1 as select * from t1;
create view v2 as select * from v1;
-- error 1146
-- error ER_NO_SUCH_TABLE
alter view v1 as select * from v2;
-- error 1146
-- error ER_NO_SUCH_TABLE
alter view v1 as select * from v1;
-- error 1146
-- error ER_NO_SUCH_TABLE
create or replace view v1 as select * from v2;
-- error 1146
-- error ER_NO_SUCH_TABLE
create or replace view v1 as select * from v1;
drop view v2,v1;
drop table t1;
......@@ -1134,7 +1134,7 @@ select * from t2;
# check it with check option
alter view v2 as select * from t2 where s1 in (select s1 from t1) with check option;
insert into v2 values (5);
-- error 1369
-- error ER_VIEW_CHECK_FAILED
update v2 set s1 = 1;
insert into t1 values (1);
update v2 set s1 = 1;
......@@ -1166,7 +1166,7 @@ drop table t1;
create table t1 (s1 tinyint);
create view v1 as select * from t1 where s1 <> 0 with local check option;
create view v2 as select * from v1 with cascaded check option;
-- error 1369
-- error ER_VIEW_CHECK_FAILED
insert into v2 values (0);
drop view v2, v1;
drop table t1;
......@@ -1177,7 +1177,7 @@ drop table t1;
create table t1 (s1 int);
create view v1 as select * from t1 where s1 < 5 with check option;
#single value
-- error 1369
-- error ER_VIEW_CHECK_FAILED
insert ignore into v1 values (6);
#several values
insert ignore into v1 values (6),(3);
......@@ -1191,7 +1191,7 @@ drop table t1;
create table t1 (s1 tinyint);
create trigger t1_bi before insert on t1 for each row set new.s1 = 500;
create view v1 as select * from t1 where s1 <> 127 with check option;
-- error 1369
-- error ER_VIEW_CHECK_FAILED
insert into v1 values (0);
select * from v1;
select * from t1;
......@@ -1205,7 +1205,7 @@ drop table t1;
create table t1 (s1 tinyint);
create view v1 as select * from t1 where s1 <> 0;
create view v2 as select * from v1 where s1 <> 1 with cascaded check option;
-- error 1369
-- error ER_VIEW_CHECK_FAILED
insert into v2 values (0);
select * from v2;
select * from t1;
......@@ -1218,7 +1218,7 @@ drop table t1;
# fixed length fields
create table t1 (a int, b char(10));
create view v1 as select * from t1 where a != 0 with check option;
-- error 1369
-- error ER_VIEW_CHECK_FAILED
load data infile '../std_data_ln/loaddata3.dat' into table v1 fields terminated by '' enclosed by '' ignore 1 lines;
select * from t1;
select * from v1;
......@@ -1231,7 +1231,7 @@ drop table t1;
# variable length fields
create table t1 (a text, b text);
create view v1 as select * from t1 where a <> 'Field A' with check option;
-- error 1369
-- error ER_VIEW_CHECK_FAILED
load data infile '../std_data_ln/loaddata2.dat' into table v1 fields terminated by ',' enclosed by '''';
select concat('|',a,'|'), concat('|',b,'|') from t1;
select concat('|',a,'|'), concat('|',b,'|') from v1;
......@@ -1247,14 +1247,14 @@ drop table t1;
#
create table t1 (s1 smallint);
create view v1 as select * from t1 where 20 < (select (s1) from t1);
-- error 1471
-- error ER_NON_INSERTABLE_TABLE
insert into v1 values (30);
create view v2 as select * from t1;
create view v3 as select * from t1 where 20 < (select (s1) from v2);
-- error 1471
-- error ER_NON_INSERTABLE_TABLE
insert into v3 values (30);
create view v4 as select * from v2 where 20 < (select (s1) from t1);
-- error 1471
-- error ER_NON_INSERTABLE_TABLE
insert into v4 values (30);
drop view v4, v3, v2, v1;
drop table t1;
......@@ -1312,7 +1312,7 @@ select * from t2;
# view without primary key
create view v2 (a,b) as select t1.b as a, t2.a as b from t1, t2;
set updatable_views_with_limit=NO;
-- error 1288
-- error ER_NON_UPDATABLE_TABLE
update v2 set a= 10 where a=200 limit 1;
set updatable_views_with_limit=DEFAULT;
# just view selects
......@@ -1340,14 +1340,14 @@ create table t2 (a int, primary key (a), b int);
insert into t2 values (1000, 2000);
create view v3 (a,b) as select t1.a as a, t2.a as b from t1, t2;
# inserting into join view without field list
-- error 1394
-- error ER_VIEW_NO_INSERT_FIELD_LIST
insert into v3 values (1,2);
-- error 1394
-- error ER_VIEW_NO_INSERT_FIELD_LIST
insert into v3 select * from t2;
# inserting in several tables of join view
-- error 1393
-- error ER_VIEW_MULTIUPDATE
insert into v3(a,b) values (1,2);
-- error 1393
-- error ER_VIEW_MULTIUPDATE
insert into v3(a,b) select * from t2;
# correct inserts into join view
insert into v3(a) values (1);
......@@ -1358,11 +1358,11 @@ insert into v3(a) values (1) on duplicate key update a=a+10000+VALUES(a);
select * from t1;
select * from t2;
# try delete from join view
-- error 1395
-- error ER_VIEW_DELETE_MERGE_VIEW
delete from v3;
-- error 1395
-- error ER_VIEW_DELETE_MERGE_VIEW
delete v3,t1 from v3,t1;
-- error 1395
-- error ER_VIEW_DELETE_MERGE_VIEW
delete t1,v3 from t1,v3;
# delete from t1 just to reduce result set size
delete from t1;
......@@ -1394,7 +1394,7 @@ drop view v1;
drop table t1;
#
# Resolving view fields in subqueries in VIEW (Bug #6394)
# Resolving view fields in subqueries in VIEW (Bug#6394)
#
create table t1(c1 int);
create table t2(c2 int);
......@@ -1411,7 +1411,7 @@ drop view v2, v1;
drop table t1, t2;
#
# view over other view setup (BUG#7433)
# view over other view setup (Bug#7433)
#
CREATE TABLE t1 (C1 INT, C2 INT);
CREATE TABLE t2 (C2 INT);
......@@ -1422,7 +1422,7 @@ drop view v2, v1;
drop table t1, t2;
#
# view and group_concat() (BUG#7116)
# view and group_concat() (Bug#7116)
#
create table t1 (col1 char(5),col2 int,col3 int);
insert into t1 values ('one',10,25), ('two',10,50), ('two',10,50), ('one',20,25), ('one',30,25);
......@@ -1433,18 +1433,18 @@ drop view v1;
drop table t1;
#
# Item_ref resolved as view field (BUG#6894)
# Item_ref resolved as view field (Bug#6894)
#
create table t1 (s1 int, s2 char);
create view v1 as select s1, s2 from t1;
-- error 1054
-- error ER_BAD_FIELD_ERROR
select s2 from v1 vq1 where 2 = (select count(*) from v1 vq2 having vq1.s2 = vq2.s2);
select s2 from v1 vq1 where 2 = (select count(*) aa from v1 vq2 having vq1.s2 = aa);
drop view v1;
drop table t1;
#
# Test case for bug #9398 CREATE TABLE with SELECT from a multi-table view
# Test case for Bug#9398 CREATE TABLE with SELECT from a multi-table view
#
CREATE TABLE t1 (a1 int);
CREATE TABLE t2 (a2 int);
......@@ -1460,7 +1460,7 @@ DROP VIEW v1;
DROP TABLE t1,t2,t3;
#
# Test for BUG#8703 "insert into table select from view crashes"
# Test for Bug#8703 insert into table select from view crashes
#
create table t1 (a int);
create table t2 like t1;
......@@ -1472,7 +1472,7 @@ drop view v1;
drop table t1,t2,t3;
#
# Test for BUG #6106: query over a view using subquery for the underlying table
# Test for Bug#6106 query over a view using subquery for the underlying table
#
CREATE TABLE t1 (col1 int PRIMARY KEY, col2 varchar(10));
......@@ -1515,7 +1515,7 @@ SELECT a.col1,a.col2,b.col2,b.col3
WHERE b.col2 IS NULL OR
b.col2=(SELECT MAX(col2) FROM v2 b WHERE b.col1=a.col1);
# Tests from the report for bug #6107
# Tests from the report for Bug#6107
SELECT a.col1,a.col2,b.col2,b.col3
FROM v2 b RIGHT JOIN v1 a ON a.col1=b.col1
......@@ -1534,7 +1534,7 @@ DROP VIEW v1,v2,v3;
DROP TABLE t1,t2;
#
# BUG#8490 Select from views containing subqueries causes server to hang
# Bug#8490 Select from views containing subqueries causes server to hang
# forever.
#
create table t1 as select 1 A union select 2 union select 3;
......@@ -1549,7 +1549,7 @@ drop view v1, v2;
drop table t1, t2, t3;
#
# Test case for bug #8528: select from view over multi-table view
# Test case for Bug#8528 select from view over multi-table view
#
CREATE TABLE t1 (a int);
CREATE TABLE t2 (b int);
......@@ -1565,7 +1565,7 @@ DROP VIEW v2,v1;
DROP TABLE t1, t2;
#
# Correct restoring view name in SP table locking BUG#9758
# Correct restoring view name in SP table locking Bug#9758
#
create table t1 (a int);
create view v1 as select sum(a) from t1 group by a;
......@@ -1594,7 +1594,7 @@ SELECT d, c FROM v1 ORDER BY d,c;
DROP VIEW v1;
DROP TABLE t1, t2;
#
# using sum(distinct ) & avg(distinct ) in views (BUG#7015)
# using sum(distinct ) & avg(distinct ) in views (Bug#7015)
#
create table t1 (s1 int);
create view v1 as select sum(distinct s1) from t1;
......@@ -1606,7 +1606,7 @@ drop view v1;
drop table t1;
#
# using cast(... as decimal) in views (BUG#11387);
# using cast(... as decimal) in views (Bug#11387);
#
create view v1 as select cast(1 as decimal);
select * from v1;
......@@ -1627,7 +1627,7 @@ drop view v1;
drop table t1,t2,t3;
#
# Generation unique names for columns, and correct names check (BUG#7448)
# Generation unique names for columns, and correct names check (Bug#7448)
#
# names with ' and \
create view v1 as select '\\','\\shazam';
......@@ -1670,24 +1670,24 @@ create view v1 as select 's1', 's1', s1 from t1;
select * from v1;
drop view v1;
# underlying field name conflict with set name
-- error 1060
-- error ER_DUP_FIELDNAME
create view v1 as select 1 as s1, 's1', s1 from t1;
-- error 1060
-- error ER_DUP_FIELDNAME
create view v1 as select 's1', s1, 1 as s1 from t1;
drop table t1;
# set names differ by case only
-- error 1060
-- error ER_DUP_FIELDNAME
create view v1(k, K) as select 1,2;
#
# using time_format in view (BUG#7521)
# using time_format in view (Bug#7521)
#
create view v1 as SELECT TIME_FORMAT(SEC_TO_TIME(3600),'%H:%i') as t;
select * from v1;
drop view v1;
#
# evaluation constant functions in WHERE (BUG#4663)
# evaluation constant functions in WHERE (Bug#4663)
#
create table t1 (a timestamp default now());
create table t2 (b timestamp default now());
......@@ -1708,7 +1708,7 @@ DROP VIEW v1;
DROP TABLE t1;
#
# checking views after some view with error (BUG#11337)
# checking views after some view with error (Bug#11337)
#
CREATE TABLE t1 (col1 time);
CREATE TABLE t2 (col1 time);
......@@ -1749,7 +1749,7 @@ drop view v1, v2, v3, v4, v5, v6;
drop table t2,t3;
#
# bug #11325 Wrong date comparison in views
# Bug#11325 Wrong date comparison in views
#
create table t1 (f1 date);
insert into t1 values ('2005-01-01'),('2005-02-02');
......@@ -1760,7 +1760,7 @@ drop view v1;
drop table t1;
#
# using encrypt & substring_index in view (BUG#7024)
# using encrypt & substring_index in view (Bug#7024)
#
CREATE VIEW v1 AS SELECT ENCRYPT("dhgdhgd");
disable_result_log;
......@@ -1772,21 +1772,21 @@ SELECT * FROM v1;
drop view v1;
#
# hide underlying tables names in case of imposibility to update (BUG#10773)
# hide underlying tables names in case of imposibility to update (Bug#10773)
#
create table t1 (f59 int, f60 int, f61 int);
insert into t1 values (19,41,32);
create view v1 as select f59, f60 from t1 where f59 in
(select f59 from t1);
-- error 1288
-- error ER_NON_UPDATABLE_TABLE
update v1 set f60=2345;
-- error 1443
-- error ER_VIEW_PREVENT_UPDATE
update t1 set f60=(select max(f60) from v1);
drop view v1;
drop table t1;
#
# Using var_samp with view (BUG#10651)
# Using var_samp with view (Bug#10651)
#
create table t1 (s1 int);
create view v1 as select var_samp(s1) from t1;
......@@ -1794,24 +1794,26 @@ show create view v1;
drop view v1;
drop table t1;
#
# Correct inserting data check (absence of default value) for view
# underlying tables (BUG#6443)
# underlying tables (Bug#6443)
#
set sql_mode='strict_all_tables';
CREATE TABLE t1 (col1 INT NOT NULL, col2 INT NOT NULL);
CREATE VIEW v1 (vcol1) AS SELECT col1 FROM t1;
CREATE VIEW v2 (vcol1) AS SELECT col1 FROM t1 WHERE col2 > 2;
-- error 1364
-- error ER_NO_DEFAULT_FOR_FIELD
INSERT INTO t1 (col1) VALUES(12);
-- error 1423
-- error ER_NO_DEFAULT_FOR_VIEW_FIELD
INSERT INTO v1 (vcol1) VALUES(12);
-- error 1423
-- error ER_NO_DEFAULT_FOR_VIEW_FIELD
INSERT INTO v2 (vcol1) VALUES(12);
set sql_mode=default;
drop view v2,v1;
drop table t1;
#
# Bug#11399 Use an alias in a select statement on a view
#
......@@ -1822,8 +1824,9 @@ select f1 as alias from v1;
drop view v1;
drop table t1;
#
# Test for bug #6120: SP cache to be invalidated when altering a view
# Test for Bug#6120 SP cache to be invalidated when altering a view
#
CREATE TABLE t1 (s1 int, s2 int);
......@@ -1842,8 +1845,9 @@ DROP PROCEDURE p1;
DROP VIEW v1;
DROP TABLE t1;
#
# Test for bug #11709 View was ordered by wrong column
# Test for Bug#11709 View was ordered by wrong column
#
create table t1 (f1 int, f2 int);
create view v1 as select f1 as f3, f2 as f1 from t1;
......@@ -1852,8 +1856,9 @@ select * from v1 order by f1;
drop view v1;
drop table t1;
#
# Test for bug #11771: wrong query_id in SELECT * FROM <view>
# Test for Bug#11771 wrong query_id in SELECT * FROM <view>
#
CREATE TABLE t1 (f1 char);
INSERT INTO t1 VALUES ('A');
......@@ -1866,8 +1871,9 @@ SELECT * FROM t1;
DROP VIEW v1;
DROP TABLE t1;
#
# opening table in correct locking mode (BUG#9597)
# opening table in correct locking mode (Bug#9597)
#
CREATE TABLE t1 ( bug_table_seq INTEGER NOT NULL);
CREATE OR REPLACE VIEW v1 AS SELECT * from t1;
......@@ -1884,8 +1890,9 @@ DROP PROCEDURE p1;
DROP VIEW v1;
DROP TABLE t1;
#
# Bug #11335 View redefines column types
# Bug#11335 View redefines column types
#
create table t1 (f1 tinyint(1), f2 char(1), f3 varchar(1), f4 geometry, f5 datetime);
create view v1 as select * from t1;
......@@ -1893,8 +1900,9 @@ desc v1;
drop view v1;
drop table t1;
#
# Bug #11760 Typo in Item_func_add_time::print() results in NULLs returned
# Bug#11760 Typo in Item_func_add_time::print() results in NULLs returned
# subtime() in view
create table t1(f1 datetime);
insert into t1 values('2005.01.01 12:0:0');
......@@ -1903,8 +1911,9 @@ select * from v1;
drop view v1;
drop table t1;
#
# Test for bug #11412: query over a multitable view with GROUP_CONCAT
# Test for Bug#11412 query over a multitable view with GROUP_CONCAT
#
CREATE TABLE t1 (
aid int PRIMARY KEY,
......@@ -1927,8 +1936,9 @@ SELECT pid,GROUP_CONCAT(CONCAT(fn,' ',ln) ORDER BY 1) FROM v1 GROUP BY pid;
DROP VIEW v1;
DROP TABLE t1,t2;
#
# Test for bug #12382: SELECT * FROM view after INSERT command
# Test for Bug#12382 SELECT * FROM view after INSERT command
#
CREATE TABLE t1 (id int PRIMARY KEY, f varchar(255));
......@@ -1942,8 +1952,9 @@ SELECT * FROM v1;
DROP VIEW v1;
DROP TABLE t1;
#
# Test for bug #12470: crash for a simple select from a view defined
# Test for Bug#12470 crash for a simple select from a view defined
# as a join over 5 tables
CREATE TABLE t1 (pk int PRIMARY KEY, b int);
......@@ -1961,27 +1972,29 @@ SELECT a FROM v1;
DROP VIEW v1;
DROP TABLE t1,t2,t3,t4,t5;
#
# Bug #12298 Typo in function name results in erroneous view being created.
# Bug#12298 Typo in function name results in erroneous view being created.
#
create view v1 as select timestampdiff(day,'1997-01-01 00:00:00','1997-01-02 00:00:00') as f1;
select * from v1;
drop view v1;
#
# repeatable CREATE VIEW statement BUG#12468
# repeatable CREATE VIEW statement Bug#12468
#
create table t1(a int);
create procedure p1() create view v1 as select * from t1;
drop table t1;
-- error 1146
-- error ER_NO_SUCH_TABLE
call p1();
-- error 1146
-- error ER_NO_SUCH_TABLE
call p1();
drop procedure p1;
#
# Bug #10624 Views with multiple UNION and UNION ALL produce incorrect results
# Bug#10624 Views with multiple UNION and UNION ALL produce incorrect results
#
create table t1 (f1 int);
create table t2 (f1 int);
......@@ -1991,20 +2004,23 @@ create view v1 as select * from t1 union select * from t2 union all select * fro
select * from v1;
drop view v1;
drop table t1,t2;
#
# Test for bug #10970: view referring a temporary table indirectly
# Test for Bug#10970 view referring a temporary table indirectly
#
CREATE TEMPORARY TABLE t1 (a int);
CREATE FUNCTION f1 () RETURNS int RETURN (SELECT COUNT(*) FROM t1);
-- error 1352
-- error ER_VIEW_SELECT_TMPTABLE
CREATE VIEW v1 AS SELECT f1();
DROP FUNCTION f1;
DROP TABLE t1;
#
# BUG #12533 (crash on DESCRIBE <view> after renaming base table column)
# Bug#12533 (crash on DESCRIBE <view> after renaming base table column)
#
--disable_warnings
DROP TABLE IF EXISTS t1;
......@@ -2016,13 +2032,14 @@ CREATE VIEW v1 AS SELECT * FROM t1;
DESCRIBE v1;
ALTER TABLE t1 CHANGE COLUMN f4 f4x CHAR(5);
--error 1356
--error ER_VIEW_INVALID
DESCRIBE v1;
DROP TABLE t1;
DROP VIEW v1;
#
# Bug #12489 wrongly printed strcmp() function results in creation of broken
# Bug#12489 wrongly printed strcmp() function results in creation of broken
# view
create table t1 (f1 char);
create view v1 as select strcmp(f1,'a') from t1;
......@@ -2030,8 +2047,9 @@ select * from v1;
drop view v1;
drop table t1;
#
# Bug #12922 if(sum(),...) with group from view returns wrong results
# Bug#12922 if(sum(),...) with group from view returns wrong results
#
create table t1 (f1 int, f2 int,f3 int);
insert into t1 values (1,10,20),(2,0,0);
......@@ -2039,7 +2057,9 @@ create view v1 as select * from t1;
select if(sum(f1)>1,f2,f3) from v1 group by f1;
drop view v1;
drop table t1;
# BUG#12941
# Bug#12941
#
--disable_warnings
create table t1 (
......@@ -2073,7 +2093,8 @@ order by users_names;
drop view v1, v2;
drop table t1, t2;
# Bug #6808 - Views: CREATE VIEW v ... FROM t AS v fails
# Bug#6808 Views: CREATE VIEW v ... FROM t AS v fails
#
create table t1 (s1 int);
......@@ -2081,8 +2102,9 @@ create view abc as select * from t1 as abc;
drop table t1;
drop view abc;
#
# Bug #12993 View column rename broken in subselect
# Bug#12993 View column rename broken in subselect
#
create table t1(f1 char(1));
create view v1 as select * from t1;
......@@ -2090,15 +2112,17 @@ select * from (select f1 as f2 from v1) v where v.f2='a';
drop view v1;
drop table t1;
#
# Bug #11416 Server crash if using a view that uses function convert_tz
# Bug#11416 Server crash if using a view that uses function convert_tz
#
create view v1 as SELECT CONVERT_TZ('2004-01-01 12:00:00','GMT','MET');
select * from v1;
drop view v1;
#
# Bugs #12963, #13000: wrong creation of VIEW with DAYNAME, DAYOFWEEK, and WEEKDAY
# Bugs#12963, #13000 wrong creation of VIEW with DAYNAME, DAYOFWEEK, and WEEKDAY
#
CREATE TABLE t1 (date DATE NOT NULL);
......@@ -2128,8 +2152,9 @@ SELECT * FROM v3;
DROP TABLE t1;
DROP VIEW v1, v2, v3;
#
# Bug #13411: crash when using non-qualified view column in HAVING clause
# Bug#13411 crash when using non-qualified view column in HAVING clause
#
CREATE TABLE t1 ( a int, b int );
......@@ -2141,8 +2166,9 @@ SELECT v1.a FROM v1 GROUP BY v1.a HAVING a > 1;
DROP VIEW v1;
DROP TABLE t1;
#
# Bug #13410: failed name resolution for qualified view column in HAVING
# Bug#13410 failed name resolution for qualified view column in HAVING
#
CREATE TABLE t1 ( a int, b int );
......@@ -2156,8 +2182,9 @@ SELECT v_1.a FROM v1 AS v_1 GROUP BY v_1.a HAVING v_1.a IN (1,2,3);
DROP VIEW v1;
DROP TABLE t1;
#
# Bug #13327 view wasn't using index for const condition
# Bug#13327 view wasn't using index for const condition
#
CREATE TABLE t1 (a INT, b INT, INDEX(a,b));
......@@ -2174,8 +2201,9 @@ EXPLAIN SELECT * FROM v2 WHERE a=1;
DROP VIEW v1,v2;
DROP TABLE t1,t2,t3;
#
# Bug #13622 Wrong view .frm created if some field's alias contain \n
# Bug#13622 Wrong view .frm created if some field's alias contain \n
#
create table t1 (f1 int);
create view v1 as select t1.f1 as '123
......@@ -2184,7 +2212,8 @@ select * from v1;
drop view v1;
drop table t1;
# Bug #14466 lost sort order in GROUP_CONCAT() in a view
# Bug#14466 lost sort order in GROUP_CONCAT() in a view
#
create table t1 (f1 int, f2 int);
insert into t1 values(1,1),(1,2),(1,3);
......@@ -2195,8 +2224,9 @@ select * from v2;
drop view v1,v2;
drop table t1;
#
# BUG#14026 Crash on second PS execution when using views
# Bug#14026 Crash on second PS execution when using views
#
create table t1 (x int, y int);
create table t2 (x int, y int, z int);
......@@ -2219,8 +2249,9 @@ execute stmt1 using @parm1;
drop view v1;
drop table t1,t2,t3,t4;
#
# Bug #14540: OPTIMIZE, ANALYZE, REPAIR applied to not a view
# Bug#14540 OPTIMIZE, ANALYZE, REPAIR applied to not a view
#
CREATE TABLE t1(id INT);
......@@ -2239,7 +2270,7 @@ DROP VIEW v1;
#
# BUG#14719: Views DEFINER grammar is incorrect
# Bug#14719 Views DEFINER grammar is incorrect
#
create definer = current_user() sql security invoker view v1 as select 1;
......@@ -2250,8 +2281,9 @@ create definer = current_user sql security invoker view v1 as select 1;
show create view v1;
drop view v1;
#
# Bug #14816 test_if_order_by_key() expected only Item_fields.
# Bug#14816 test_if_order_by_key() expected only Item_fields.
#
create table t1 (id INT, primary key(id));
insert into t1 values (1),(2);
......@@ -2260,8 +2292,9 @@ explain select id from v1 order by id;
drop view v1;
drop table t1;
#
# Bug #14850 Item_ref's values wasn't updated
# Bug#14850 Item_ref's values wasn't updated
#
create table t1(f1 int, f2 int);
insert into t1 values (null, 10), (null,2);
......@@ -2271,8 +2304,9 @@ select f1, sum(f2) from v1 group by f1;
drop view v1;
drop table t1;
#
# BUG#14885: incorrect SOURCE in view created in a procedure
# Bug#14885 incorrect SOURCE in view created in a procedure
# TODO: here SOURCE string must be shown when it will be possible
#
--disable_warnings
......@@ -2290,8 +2324,9 @@ show create view v1;
drop view v1;
drop procedure p1;
#
# BUG#15096: using function with view for view creation
# Bug#15096 using function with view for view creation
#
CREATE VIEW v1 AS SELECT 42 AS Meaning;
--disable_warnings
......@@ -2311,8 +2346,9 @@ select * from v2;
drop view v2,v1;
drop function f1;
#
# Bug#14861: aliased column names are not preserved.
# Bug#14861 aliased column names are not preserved.
#
create table t1 (id numeric, warehouse_id numeric);
create view v1 as select id from t1;
......@@ -2330,8 +2366,9 @@ order by v2.receipt_id;
drop view v2, v1;
drop table t1;
#
# Bug#16016: MIN/MAX optimization for views
# Bug#16016 MIN/MAX optimization for views
#
CREATE TABLE t1 (a int PRIMARY KEY, b int);
......@@ -2354,8 +2391,9 @@ EXPLAIN SELECT MIN(a) FROM v1;
DROP VIEW v1;
DROP TABLE t1;
#
# Bug#16382: grouping name is resolved against a view column name
# Bug#16382 grouping name is resolved against a view column name
# which coincides with a select column name
CREATE TABLE t1 (x varchar(10));
......@@ -2371,8 +2409,9 @@ SELECT IF(x IS NULL, 'blank', 'not blank') AS x FROM v1 GROUP BY x;
DROP VIEW v1;
DROP TABLE t1;
#
# BUG#15943: mysql_next_result hangs on invalid SHOW CREATE VIEW
# Bug#15943 mysql_next_result hangs on invalid SHOW CREATE VIEW
#
delimiter //;
......@@ -2386,6 +2425,7 @@ drop view v1;
//
delimiter ;//
#
# Bug#17726 Not checked empty list caused endless loop
#
......@@ -2400,8 +2440,9 @@ select * from v2;
drop view v2, v1;
drop table t1;
#
# Bug #18386: select from view over a table with ORDER BY view_col clause
# Bug#18386 select from view over a table with ORDER BY view_col clause
# given view_col is not an image of any column from the base table
CREATE TABLE t1 (a int);
......@@ -2414,8 +2455,9 @@ SELECT my_sqrt FROM v1 ORDER BY my_sqrt;
DROP VIEW v1;
DROP TABLE t1;
#
# Bug #18237: invalid count optimization applied to an outer join with a view
# Bug#18237 invalid count optimization applied to an outer join with a view
#
CREATE TABLE t1 (id int PRIMARY KEY);
......@@ -2435,8 +2477,9 @@ DROP VIEW v2;
DROP TABLE t1, t2;
#
# Bug #16069: VIEW does return the same results as underlying SELECT
# Bug#16069 VIEW does return the same results as underlying SELECT
# with WHERE condition containing BETWEEN over dates
CREATE TABLE t1 (id int NOT NULL PRIMARY KEY,
......@@ -2455,8 +2498,9 @@ SELECT * FROM v1 WHERE td BETWEEN CAST('2005.01.02' AS DATE) AND CAST('2005.01.0
DROP VIEW v1;
DROP TABLE t1;
#
# BUG#14308: Recursive view definitions
# Bug#14308 Recursive view definitions
#
# using view only
create table t1 (a int);
......@@ -2486,8 +2530,9 @@ select * from v1;
drop function f1;
drop view t1, v1;
#
# Bug #15153: CONVERT_TZ() is not allowed in all places in VIEWs
# Bug#15153 CONVERT_TZ() is not allowed in all places in VIEWs
#
# Error was reported when one tried to use CONVERT_TZ() function
# select list of view which was processed using MERGE algorithm.
......@@ -2513,8 +2558,9 @@ select * from v2;
drop view v1, v2;
drop table t1;
#
# Bug #19490: usage of view specified by a query with GROUP BY
# Bug#19490 usage of view specified by a query with GROUP BY
# an expression containing non-constant interval
CREATE TABLE t1 (id int NOT NULL PRIMARY KEY, d datetime);
......@@ -2529,8 +2575,9 @@ SELECT * FROM v1;
DROP VIEW v1;
DROP TABLE t1;
#
# Bug#19077: A nested materialized view is used before being populated.
# Bug#19077 A nested materialized view is used before being populated.
#
CREATE TABLE t1 (i INT, j BIGINT);
INSERT INTO t1 VALUES (1, 2), (2, 2), (3, 2);
......@@ -2540,8 +2587,9 @@ SELECT * FROM v2;
DROP VIEW v2, v1;
DROP TABLE t1;
#
# Bug #19573: VIEW with HAVING that refers an alias name
# Bug#19573 VIEW with HAVING that refers an alias name
#
CREATE TABLE t1(
......@@ -2567,8 +2615,9 @@ SELECT * FROM v1;
DROP VIEW v1;
DROP TABLE t1;
#
# Bug #19089: wrong inherited dafault values in temp table views
# Bug#19089 wrong inherited dafault values in temp table views
#
CREATE TABLE t1 (id int NOT NULL PRIMARY KEY, a char(6) DEFAULT 'xxx');
......@@ -2600,7 +2649,7 @@ DROP TABLE t1,t2;
#
# Bug#16110: insert permitted into view col w/o default value
# Bug#16110 insert permitted into view col w/o default value
#
CREATE TABLE t1 (a INT NOT NULL, b INT NULL DEFAULT NULL);
CREATE VIEW v1 AS SELECT a, b FROM t1;
......@@ -2608,7 +2657,7 @@ CREATE VIEW v1 AS SELECT a, b FROM t1;
INSERT INTO v1 (b) VALUES (2);
SET SQL_MODE = STRICT_ALL_TABLES;
--error 1423
--error ER_NO_DEFAULT_FOR_VIEW_FIELD
INSERT INTO v1 (b) VALUES (4);
SET SQL_MODE = '';
......@@ -2617,8 +2666,9 @@ SELECT * FROM t1;
DROP VIEW v1;
DROP TABLE t1;
#
# Bug #18243: expression over a view column that with the REVERSE function
# Bug#18243 expression over a view column that with the REVERSE function
#
CREATE TABLE t1 (firstname text, surname text);
......@@ -2633,8 +2683,9 @@ SELECT CONCAT(LEFT(name,LENGTH(name)-INSTR(REVERSE(name)," ")),
DROP VIEW v1;
DROP TABLE t1;
#
# Bug #19714: wrong type of a view column specified by an expressions over ints
# Bug#19714 wrong type of a view column specified by an expressions over ints
#
CREATE TABLE t1 (i int, j int);
......@@ -2646,8 +2697,9 @@ DESCRIBE t2;
DROP VIEW v1;
DROP TABLE t1,t2;
#
# Bug #17526: views with TRIM functions
# Bug#17526 views with TRIM functions
#
CREATE TABLE t1 (s varchar(10));
......@@ -2670,8 +2722,9 @@ DROP VIEW v1;
DROP TABLE t1;
#
#Bug #21080: ALTER VIEW makes user restate SQL SECURITY mode, and ALGORITHM
# Bug#21080 ALTER VIEW makes user restate SQL SECURITY mode, and ALGORITHM
#
CREATE TABLE t1 (x INT, y INT);
CREATE ALGORITHM=TEMPTABLE SQL SECURITY INVOKER VIEW v1 AS SELECT x FROM t1;
......@@ -2682,7 +2735,9 @@ SHOW CREATE VIEW v1;
DROP VIEW v1;
DROP TABLE t1;
# Bug #21086: server crashes when VIEW defined with a SELECT with COLLATE
# Bug#21086 server crashes when VIEW defined with a SELECT with COLLATE
# clause is called
#
CREATE TABLE t1 (s1 char);
......@@ -2700,19 +2755,20 @@ SELECT s1 FROM t1;
DROP VIEW v1, v2;
DROP TABLE t1;
#
# Bug #11551: Asymmetric + undocumented behaviour of DROP VIEW and DROP TABLE
# Bug#11551 Asymmetric + undocumented behaviour of DROP VIEW and DROP TABLE
#
CREATE TABLE t1 (id INT);
CREATE VIEW v1 AS SELECT id FROM t1;
SHOW TABLES;
--error 1051
--error ER_BAD_TABLE_ERROR
DROP VIEW v2,v1;
SHOW TABLES;
CREATE VIEW v1 AS SELECT id FROM t1;
--error 1347
--error ER_WRONG_OBJECT
DROP VIEW t1,v1;
SHOW TABLES;
......@@ -2721,13 +2777,14 @@ DROP TABLE t1;
DROP VIEW IF EXISTS v1;
--enable_warnings
#
# Bug #21261: Wrong access rights was required for an insert to a view
# Bug#21261 Wrong access rights was required for an insert to a view
#
CREATE DATABASE bug21261DB;
USE bug21261DB;
CONNECT (root,localhost,root,,bug21261DB);
CONNECTION root;
connect (root,localhost,root,,bug21261DB);
connection root;
CREATE TABLE t1 (x INT);
CREATE SQL SECURITY INVOKER VIEW v1 AS SELECT x FROM t1;
......@@ -2736,34 +2793,41 @@ GRANT INSERT, UPDATE ON t1 TO 'user21261'@'localhost';
CREATE TABLE t2 (y INT);
GRANT SELECT ON t2 TO 'user21261'@'localhost';
CONNECT (user21261, localhost, user21261,, bug21261DB);
CONNECTION user21261;
connect (user21261, localhost, user21261,, bug21261DB);
connection user21261;
INSERT INTO v1 (x) VALUES (5);
UPDATE v1 SET x=1;
CONNECTION root;
connection root;
GRANT SELECT ON v1 TO 'user21261'@'localhost';
GRANT SELECT ON t1 TO 'user21261'@'localhost';
CONNECTION user21261;
connection user21261;
UPDATE v1,t2 SET x=1 WHERE x=y;
CONNECTION root;
connection root;
SELECT * FROM t1;
REVOKE ALL PRIVILEGES, GRANT OPTION FROM 'user21261'@'localhost';
DROP USER 'user21261'@'localhost';
DROP VIEW v1;
DROP TABLE t1;
DROP DATABASE bug21261DB;
connection default;
USE test;
disconnect root;
disconnect user21261;
#
# Bug #15950: NOW() optimized away in VIEWs
# Bug#15950 NOW() optimized away in VIEWs
#
create table t1 (f1 datetime);
create view v1 as select * from t1 where f1 between now() and now() + interval 1 minute;
show create view v1;
drop view v1;
drop table t1;
#
# Test for BUG#16899: Possible buffer overflow in handling of DEFINER-clause.
# Test for Bug#16899 Possible buffer overflow in handling of DEFINER-clause.
#
# Prepare.
......@@ -2790,8 +2854,7 @@ DROP TABLE t1;
#
# BUG#17591: Updatable view not possible with trigger or stored
# function
# Bug#17591 Updatable view not possible with trigger or stored function
#
# During prelocking phase we didn't update lock type of view tables,
# hence READ lock was always requested.
......@@ -2835,8 +2898,9 @@ DROP FUNCTION f2;
DROP VIEW v1, v2;
DROP TABLE t1;
#
# Bug #5500: wrong select_type in EXPLAIN output for queries over views
# Bug#5500 wrong select_type in EXPLAIN output for queries over views
#
CREATE TABLE t1 (s1 int);
......@@ -2853,19 +2917,21 @@ EXPLAIN SELECT * FROM v1 t WHERE t.s1+1 < (SELECT MAX(t1.s1) FROM t1);
DROP VIEW v1;
DROP TABLE t1;
#
# Bug #5505: Wrong error message on INSERT into a view
# Bug#5505 Wrong error message on INSERT into a view
#
create table t1 (s1 int);
create view v1 as select s1 as a, s1 as b from t1;
--error 1471
--error ER_NON_INSERTABLE_TABLE
insert into v1 values (1,1);
update v1 set a = 5;
drop view v1;
drop table t1;
#
# Bug #21646: view qith a subquery in ON expression
# Bug#21646 view qith a subquery in ON expression
#
CREATE TABLE t1(pk int PRIMARY KEY);
......@@ -2884,8 +2950,7 @@ DROP TABLE t1, t2;
#
# Bug#19111: TRIGGERs selecting from a VIEW on the firing base table
# fail
# Bug#19111 TRIGGERs selecting from a VIEW on the firing base table fail
#
# Allow to select from a view on a table being modified in a trigger
# and stored function, since plain select is allowed there.
......@@ -2916,23 +2981,24 @@ DROP FUNCTION f1;
DROP VIEW v1;
DROP TABLE t1;
#
# Bug #16813 (WITH CHECK OPTION doesn't work with UPDATE)
# Bug#16813 (WITH CHECK OPTION doesn't work with UPDATE)
#
CREATE TABLE t1(id INT UNSIGNED NOT NULL AUTO_INCREMENT PRIMARY KEY, val INT UNSIGNED NOT NULL);
CREATE VIEW v1 AS SELECT id, val FROM t1 WHERE val >= 1 AND val <= 5 WITH CHECK OPTION;
INSERT INTO v1 (val) VALUES (2);
INSERT INTO v1 (val) VALUES (4);
-- error 1369
-- error ER_VIEW_CHECK_FAILED
INSERT INTO v1 (val) VALUES (6);
-- error 1369
-- error ER_VIEW_CHECK_FAILED
UPDATE v1 SET val=6 WHERE id=2;
DROP VIEW v1;
DROP TABLE t1;
#
# BUG#22584: last_insert_id not updated after inserting a record
# Bug#22584 last_insert_id not updated after inserting a record
# through a updatable view
#
# We still do not update LAST_INSERT_ID if AUTO_INCREMENT column is
......@@ -2968,8 +3034,9 @@ SELECT * FROM t1;
DROP VIEW v1, v2;
DROP TABLE t1;
#
# Bug #25580: !0 as an operand in a select expression of a view
# Bug#25580 !0 as an operand in a select expression of a view
#
CREATE VIEW v AS SELECT !0 * 5 AS x FROM DUAL;
......@@ -2980,8 +3047,9 @@ SELECT * FROM v;
DROP VIEW v;
#
# BUG#24293: '\Z' token is not handled correctly in views
# Bug#24293 '\Z' token is not handled correctly in views
#
--disable_warnings
......@@ -2995,8 +3063,9 @@ SHOW CREATE VIEW v1;
DROP VIEW v1;
#
# Bug #26124: BETWEEN over a view column of the DATETIME type
# Bug#26124 BETWEEN over a view column of the DATETIME type
#
CREATE TABLE t1 (mydate DATETIME);
......@@ -3011,8 +3080,9 @@ SELECT * FROM v1 WHERE mydate BETWEEN '2007-01-01' AND '2007-01-31';
DROP VIEW v1;
DROP TABLE t1;
#
# Bug #25931: update of a multi-table view with check option
# Bug#25931 update of a multi-table view with check option
#
CREATE TABLE t1 (a int);
......@@ -3024,7 +3094,7 @@ CREATE VIEW v1 AS
SELECT t2.b FROM t1,t2 WHERE t1.a = t2.b WITH CHECK OPTION;
SELECT * FROM v1;
--error 1369
--error ER_VIEW_CHECK_FAILED
UPDATE v1 SET b=3;
SELECT * FROM v1;
SELECT * FROM t1;
......@@ -3033,8 +3103,9 @@ SELECT * FROM t2;
DROP VIEW v1;
DROP TABLE t1,t2;
#
# Bug#12122: Views with ORDER BY can't be resolved using MERGE algorithm.
# Bug#12122 Views with ORDER BY can't be resolved using MERGE algorithm.
#
create table t1(f1 int, f2 int);
insert into t1 values(1,2),(1,3),(1,1),(2,3),(2,1),(2,2);
......@@ -3048,7 +3119,7 @@ drop view v1;
drop table t1;
#
# Bug#26209: queries with GROUP BY and ORDER BY using views
# Bug#26209 queries with GROUP BY and ORDER BY using views
#
CREATE TABLE t1 (
......@@ -3067,9 +3138,9 @@ SELECT code, COUNT(DISTINCT country) FROM v1 GROUP BY code ORDER BY MAX(id);
DROP VIEW v1;
DROP TABLE t1;
#
# BUG#25897: Some queries are no longer possible after a CREATE VIEW
# fails
# Bug#25897 Some queries are no longer possible after a CREATE VIEW fails
#
--disable_warnings
DROP VIEW IF EXISTS v1;
......@@ -3083,9 +3154,9 @@ eval CREATE VIEW v1 AS $query;
--echo # Previously the following would fail.
eval $query;
#
# Bug#24532: The return data type of IS TRUE is different from similar
# operations
# Bug#24532 The return data type of IS TRUE is different from similar operations
#
--disable_warnings
......@@ -3170,8 +3241,9 @@ drop view view_24532_a;
drop view view_24532_b;
drop table table_24532;
#
# Bug#26560: view using subquery with a reference to an outer alias
# Bug#26560 view using subquery with a reference to an outer alias
#
CREATE TABLE t1 (
......@@ -3210,8 +3282,9 @@ SELECT * FROM v1;
DROP VIEW v1;
DROP table t1,t2;
#
# Bug#27786: Inconsistent Operation Performing UNION On View With ORDER BY
# Bug#27786 Inconsistent Operation Performing UNION On View With ORDER BY
#
CREATE TABLE t1 (a INT); INSERT INTO t1 VALUES (1),(2),(3);
CREATE VIEW v1 AS SELECT a FROM t1 ORDER BY a;
......@@ -3226,8 +3299,9 @@ EXPLAIN SELECT * FROM t1 UNION SELECT * FROM v1 ORDER BY a;
DROP VIEW v1;
DROP TABLE t1;
#
# Bug #27921 View ignores precision for CAST()
# Bug#27921 View ignores precision for CAST()
#
CREATE VIEW v1 AS SELECT CAST( 1.23456789 AS DECIMAL( 7,5 ) ) AS col;
SELECT * FROM v1;
......@@ -3238,8 +3312,9 @@ CREATE VIEW v1 AS SELECT CAST(1.23456789 AS DECIMAL(8,0)) AS col;
SHOW CREATE VIEW v1;
DROP VIEW v1;
#
# Bug #28716: CHECK OPTION expression is evaluated over expired record buffers
# Bug#28716 CHECK OPTION expression is evaluated over expired record buffers
# when VIEW is updated via temporary tables
#
CREATE TABLE t1 (a INT);
......@@ -3254,9 +3329,10 @@ SELECT * FROM v1;
DROP VIEW v1;
DROP TABLE t1,t2;
#
# Bug #28561: update on multi-table view with CHECK OPTION and
# a subquery in WHERE condition
# Bug#28561 update on multi-table view with CHECK OPTION and a subquery
# in WHERE condition
#
CREATE TABLE t1 (id int);
......@@ -3273,8 +3349,9 @@ UPDATE v1 SET c=1;
DROP VIEW v1;
DROP TABLE t1,t2;
#
# Bug #27827: CHECK OPTION ignores ON conditions when updating
# Bug#27827 CHECK OPTION ignores ON conditions when updating
# a multi-table view with CHECK OPTION.
#
......@@ -3291,14 +3368,14 @@ CREATE VIEW v1 AS
SELECT t1.a1, t1.c FROM t1 JOIN t2 ON t1.a1=t2.a2 AND t1.c < 3
WITH CHECK OPTION;
SELECT * FROM v1;
--error 1369
--error ER_VIEW_CHECK_FAILED
UPDATE v1 SET c=3;
PREPARE t FROM 'UPDATE v1 SET c=3';
--error 1369
--error ER_VIEW_CHECK_FAILED
EXECUTE t;
--error 1369
--error ER_VIEW_CHECK_FAILED
EXECUTE t;
--error 1369
--error ER_VIEW_CHECK_FAILED
INSERT INTO v1(a1, c) VALUES (3, 3);
UPDATE v1 SET c=1 WHERE a1=1;
SELECT * FROM v1;
......@@ -3309,14 +3386,14 @@ CREATE VIEW v2 AS SELECT t1.a1, t1.c
JOIN (t3 JOIN t4 ON t3.a3=t4.a4)
ON t2.a2=t3.a3 WITH CHECK OPTION;
SELECT * FROM v2;
--error 1369
--error ER_VIEW_CHECK_FAILED
UPDATE v2 SET c=3;
PREPARE t FROM 'UPDATE v2 SET c=3';
--error 1369
--error ER_VIEW_CHECK_FAILED
EXECUTE t;
--error 1369
--error ER_VIEW_CHECK_FAILED
EXECUTE t;
--error 1369
--error ER_VIEW_CHECK_FAILED
INSERT INTO v2(a1, c) VALUES (3, 3);
UPDATE v2 SET c=2 WHERE a1=1;
SELECT * FROM v2;
......@@ -3325,8 +3402,9 @@ SELECT * FROM t1;
DROP VIEW v1,v2;
DROP TABLE t1,t2,t3,t4;
#
# Bug #29104: assertion abort for a query with a view column reference
# Bug#29104 assertion abort for a query with a view column reference
# in the GROUP BY list and a condition requiring the value
# of another view column to be equal to a constant
#
......@@ -3349,8 +3427,9 @@ EXPLAIN SELECT a, SUM(b) FROM v1 WHERE a=1 GROUP BY a;
DROP VIEW v1;
DROP TABLE t1;
#
# Bug #29392: SELECT over a multi-table view with ORDER BY
# Bug#29392 SELECT over a multi-table view with ORDER BY
# selecting the same view column with two different aliases
#
......@@ -3403,8 +3482,9 @@ SELECT t.person_id AS a, t.person_id AS b FROM v1 t WHERE t.person_id=6;
DROP VIEW v1;
DROP TABLE t1,t2,t3;
#
# Bug#30020: Insufficient check led to a wrong info provided by the
# Bug#30020 Insufficient check led to a wrong info provided by the
# information schema table.
#
create table t1 (i int);
......@@ -3416,8 +3496,9 @@ select table_name, is_updatable from information_schema.views
drop view v1;
drop table t1;
#
# Bug #28701: SELECTs from VIEWs completely ignore USE/FORCE KEY, allowing
# Bug#28701 SELECTs from VIEWs completely ignore USE/FORCE KEY, allowing
# invalid statements
#
......@@ -3436,7 +3517,7 @@ DROP TABLE t1;
#
# Bug #28702: VIEWs defined with USE/FORCE KEY ignore that request
# Bug#28702 VIEWs defined with USE/FORCE KEY ignore that request
#
CREATE TABLE t1 (a INT NOT NULL AUTO_INCREMENT, b INT NOT NULL DEFAULT 0,
PRIMARY KEY(a), KEY (b));
......@@ -3456,8 +3537,9 @@ DROP VIEW v2;
DROP VIEW v3;
DROP TABLE t1;
--echo #
--echo # Bug#29477: Not all fields of the target table were checked to have
--echo # Bug#29477 Not all fields of the target table were checked to have
--echo # a default value when inserting into a view.
--echo #
create table t1(f1 int, f2 int not null);
......@@ -3471,8 +3553,9 @@ set @@sql_mode=@old_mode;
drop view v1;
drop table t1;
#
# Bug #33389: Selecting from a view into a table from within SP or trigger
# Bug#33389 Selecting from a view into a table from within SP or trigger
# crashes server
#
......@@ -3492,8 +3575,9 @@ execute stmt;
drop view v1, v2;
drop table t1, t2;
#
# Bug #33049: Assert while running test-as3ap test(mysql-bench suite)
# Bug#33049 Assert while running test-as3ap test(mysql-bench suite)
#
CREATE TABLE t1 (a INT);
......@@ -3508,7 +3592,7 @@ DROP TABLE t1;
###########################################################################
--echo # -----------------------------------------------------------------
--echo # -- Bug#34337: Server crash when Altering a view using a table name.
--echo # -- Bug#34337 Server crash when Altering a view using a table name.
--echo # -----------------------------------------------------------------
--echo
......@@ -3538,7 +3622,7 @@ DROP TABLE t1;
###########################################################################
--echo # -----------------------------------------------------------------
--echo # -- Bug#35193: VIEW query is rewritten without "FROM DUAL",
--echo # -- Bug#35193 VIEW query is rewritten without "FROM DUAL",
--echo # -- causing syntax error
--echo # -----------------------------------------------------------------
--echo
......@@ -3561,15 +3645,16 @@ DROP VIEW v1;
###########################################################################
#
# Bug#39040: valgrind errors/crash when creating views with binlog logging
# Bug#39040 valgrind errors/crash when creating views with binlog logging
# enabled
#
# Bug is visible only when running in valgrind with binary logging.
CREATE VIEW v1 AS SELECT 1;
DROP VIEW v1;
#
# Bug #33461: SELECT ... FROM <view> USE INDEX (...) throws an error
# Bug#33461 SELECT ... FROM <view> USE INDEX (...) throws an error
#
CREATE TABLE t1 (c1 INT PRIMARY KEY, c2 INT, INDEX (c2));
......
mysql-test/t/view_grant.test
View file @ 7c4e55cb
# Can't test with embedded server
-- source include/not_embedded.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
# simple test of grants
grant create view on test.* to test@localhost;
show grants for test@localhost;
......@@ -26,19 +29,19 @@ grant create view,select on test.* to mysqltest_1@localhost;
connect (user1,localhost,mysqltest_1,,test);
connection user1;
-- error ER_SPECIFIC_ACCESS_DENIED_ERROR
--error ER_SPECIFIC_ACCESS_DENIED_ERROR
create definer=root@localhost view v1 as select * from mysqltest.t1;
create view v1 as select * from mysqltest.t1;
# try to modify view without DROP privilege on it
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
alter view v1 as select * from mysqltest.t1;
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
create or replace view v1 as select * from mysqltest.t1;
# no CRETE VIEW privilege
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
create view mysqltest.v2 as select * from mysqltest.t1;
# no SELECT privilege
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
create view v2 as select * from mysqltest.t2;
connection root;
......@@ -48,7 +51,7 @@ show create view v1;
grant create view,drop,select on test.* to mysqltest_1@localhost;
connection user1;
# following 'use' command is workaround of bug #9582 and should be removed
# following 'use' command is workaround of Bug#9582 and should be removed
# when that bug will be fixed
use test;
alter view v1 as select * from mysqltest.t1;
......@@ -76,7 +79,7 @@ grant select (c) on mysqltest.v1 to mysqltest_1@localhost;
connection user1;
select c from mysqltest.v1;
# there are no privileges on column 'd'
-- error 1143
--error ER_COLUMNACCESS_DENIED_ERROR
select d from mysqltest.v1;
connection root;
......@@ -96,7 +99,7 @@ grant select (c) on mysqltest.v1 to mysqltest_1@localhost;
connection user1;
select c from mysqltest.v1;
# there are no privileges on column 'd'
-- error 1143
--error ER_COLUMNACCESS_DENIED_ERROR
select d from mysqltest.v1;
connection root;
......@@ -111,7 +114,7 @@ connection root;
--disable_warnings
create database mysqltest;
--enable_warnings
#prepare views and tables
# prepare views and tables
create table mysqltest.t1 (a int, b int);
create table mysqltest.t2 (a int, b int);
create view mysqltest.v1 (c,d) as select a+1,b+1 from mysqltest.t1;
......@@ -133,21 +136,21 @@ select c from mysqltest.v4;
show columns from mysqltest.v1;
show columns from mysqltest.v2;
# but explain/show do not
-- error 1345
--error ER_VIEW_NO_EXPLAIN
explain select c from mysqltest.v1;
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
show create view mysqltest.v1;
-- error 1345
--error ER_VIEW_NO_EXPLAIN
explain select c from mysqltest.v2;
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
show create view mysqltest.v2;
-- error 1345
--error ER_VIEW_NO_EXPLAIN
explain select c from mysqltest.v3;
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
show create view mysqltest.v3;
-- error 1345
--error ER_VIEW_NO_EXPLAIN
explain select c from mysqltest.v4;
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
show create view mysqltest.v4;
# allow to see one of underlying table
......@@ -156,19 +159,19 @@ grant select on mysqltest.t1 to mysqltest_1@localhost;
connection user1;
# EXPLAIN of view on above table works
explain select c from mysqltest.v1;
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
show create view mysqltest.v1;
explain select c from mysqltest.v2;
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
show create view mysqltest.v2;
# but other EXPLAINs do not
-- error 1345
--error ER_VIEW_NO_EXPLAIN
explain select c from mysqltest.v3;
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
show create view mysqltest.v3;
-- error 1345
--error ER_VIEW_NO_EXPLAIN
explain select c from mysqltest.v4;
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
show create view mysqltest.v4;
# allow to see any view in mysqltest database
......@@ -222,14 +225,14 @@ select * from t1;
update v2 set a=a+c;
select * from t1;
# no rights on column
-- error 1143
--error ER_COLUMNACCESS_DENIED_ERROR
update t2,v2 set v2.c=v2.a+v2.c where t2.x=v2.c;
-- error 1143
--error ER_COLUMNACCESS_DENIED_ERROR
update v2 set c=a+c;
# no rights for view
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
update t2,v3 set v3.a=v3.a+v3.c where t2.x=v3.c;
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
update v3 set a=a+c;
use test;
......@@ -263,9 +266,9 @@ select * from t1;
delete v1 from t2,v1 where t2.x=v1.c;
select * from t1;
# no rights for view
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
delete v2 from t2,v2 where t2.x=v2.c;
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
delete from v2 where c < 4;
use test;
......@@ -299,9 +302,9 @@ select * from t1;
insert into v1 select x,y from t2;
select * from t1;
# no rights for view
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
insert into v2 values (5,6);
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
insert into v2 select x,y from t2;
use test;
......@@ -329,10 +332,10 @@ connection user1;
create view v1 as select * from mysqltest.t1;
create view v2 as select b from mysqltest.t2;
# There are not rights on mysqltest.v1
-- error 1142
--error ER_TABLEACCESS_DENIED_ERROR
create view mysqltest.v1 as select * from mysqltest.t1;
# There are not any rights on mysqltest.t2.a
-- error 1143
--error ER_COLUMNACCESS_DENIED_ERROR
create view v3 as select a from mysqltest.t2;
# give CREATE VIEW privileges (without any privileges for result column)
......@@ -352,13 +355,13 @@ create view mysqltest.v3 as select b from mysqltest.t2;
# Expression need select privileges
-- error 1143
--error ER_COLUMNACCESS_DENIED_ERROR
create view v4 as select b+1 from mysqltest.t2;
connection root;
grant create view,update,select on test.* to mysqltest_1@localhost;
connection user1;
-- error 1143
--error ER_COLUMNACCESS_DENIED_ERROR
create view v4 as select b+1 from mysqltest.t2;
connection root;
......@@ -411,7 +414,7 @@ connection root;
# check view definer information
show create view v1;
revoke select on mysqltest.t1 from mysqltest_1@localhost;
-- error ER_VIEW_INVALID
--error ER_VIEW_INVALID
select * from v1;
grant select on mysqltest.t1 to mysqltest_1@localhost;
select * from v1;
......@@ -420,7 +423,7 @@ drop view v1;
drop database mysqltest;
#
# rights on execution of view underlying functiond (BUG#9505)
# rights on execution of view underlying functiond (Bug#9505)
#
connection root;
--disable_warnings
......@@ -453,11 +456,11 @@ connection user1;
use mysqltest;
select * from v1;
select * from v2;
-- error ER_VIEW_INVALID
--error ER_VIEW_INVALID
select * from v3;
-- error ER_VIEW_INVALID
--error ER_VIEW_INVALID
select * from v4;
-- error ER_VIEW_INVALID
--error ER_VIEW_INVALID
select * from v5;
use test;
......@@ -505,13 +508,13 @@ use test;
connection root;
create view v5 as select * from v1;
revoke execute on function f2 from mysqltest_1@localhost;
-- error ER_VIEW_INVALID
--error ER_VIEW_INVALID
select * from v1;
-- error ER_VIEW_INVALID
--error ER_VIEW_INVALID
select * from v2;
select * from v3;
select * from v4;
-- error ER_VIEW_INVALID
--error ER_VIEW_INVALID
select * from v5;
drop view v1, v2, v3, v4, v5;
......@@ -549,13 +552,13 @@ use test;
connection root;
revoke select on t1 from mysqltest_1@localhost;
-- error ER_VIEW_INVALID
--error ER_VIEW_INVALID
select * from v1;
-- error ER_VIEW_INVALID
--error ER_VIEW_INVALID
select * from v2;
select * from v3;
select * from v4;
-- error ER_VIEW_INVALID
--error ER_VIEW_INVALID
select * from v5;
#drop view v1, v2, v3, v4, v5;
......@@ -588,11 +591,11 @@ connection user1;
use mysqltest;
select * from v1;
select * from v2;
-- error ER_VIEW_INVALID
--error ER_VIEW_INVALID
select * from v3;
-- error ER_VIEW_INVALID
--error ER_VIEW_INVALID
select * from v4;
-- error ER_VIEW_INVALID
--error ER_VIEW_INVALID
select * from v5;
use test;
......@@ -604,7 +607,7 @@ REVOKE ALL PRIVILEGES, GRANT OPTION FROM mysqltest_1@localhost;
drop database mysqltest;
#
# BUG#14256: definer in view definition is not fully qualified
# Bug#14256 definer in view definition is not fully qualified
#
--disable_warnings
drop view if exists v1;
......@@ -641,6 +644,7 @@ drop view v1;
select @v1def1, @v1def2, @v1def1=@v1def2;
connection root;
disconnect test14256;
drop user test14256;
# Restore the anonymous users.
......@@ -650,8 +654,8 @@ flush privileges;
drop table t1;
#
# BUG#14726: freeing stack variable in case of an error of opening
# a view when we have locked tables with LOCK TABLES statement.
# Bug#14726 freeing stack variable in case of an error of opening a view when
# we have locked tables with LOCK TABLES statement.
#
connection root;
--disable_warnings
......@@ -668,7 +672,7 @@ connection user1;
use mysqltest;
LOCK TABLES v1 READ;
-- error ER_TABLEACCESS_DENIED_ERROR
--error ER_TABLEACCESS_DENIED_ERROR
SHOW CREATE TABLE v1;
UNLOCK TABLES;
use test;
......@@ -679,7 +683,7 @@ drop user mysqltest_1@localhost;
drop database mysqltest;
#
# switch to default connaction
# switch to default connection
#
disconnect user1;
disconnect root;
......@@ -696,7 +700,7 @@ drop view v1;
drop view v2;
#
# Bug#18681: View privileges are broken
# Bug#18681 View privileges are broken
#
CREATE DATABASE mysqltest1;
CREATE USER readonly@localhost;
......@@ -717,54 +721,55 @@ GRANT UPDATE,SELECT ON mysqltest1.v_tus TO readonly@localhost;
GRANT DELETE ON mysqltest1.v_td TO readonly@localhost;
GRANT DELETE,SELECT ON mysqltest1.v_tds TO readonly@localhost;
CONNECT (n1,localhost,readonly,,);
CONNECTION n1;
connect (n1,localhost,readonly,,);
connection n1;
--error 1356
--error ER_VIEW_INVALID
SELECT * FROM mysqltest1.v_t1;
--error 1356
--error ER_VIEW_INVALID
INSERT INTO mysqltest1.v_t1 VALUES(4);
--error 1356
--error ER_VIEW_INVALID
DELETE FROM mysqltest1.v_t1 WHERE x = 1;
--error 1356
--error ER_VIEW_INVALID
UPDATE mysqltest1.v_t1 SET x = 3 WHERE x = 2;
--error 1356
--error ER_VIEW_INVALID
UPDATE mysqltest1.v_t1 SET x = 3;
--error 1356
--error ER_VIEW_INVALID
DELETE FROM mysqltest1.v_t1;
--error 1356
--error ER_VIEW_INVALID
SELECT 1 FROM mysqltest1.v_t1;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
SELECT * FROM mysqltest1.t1;
SELECT * FROM mysqltest1.v_ts;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
SELECT * FROM mysqltest1.v_ts, mysqltest1.t1 WHERE mysqltest1.t1.x = mysqltest1.v_ts.x;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
SELECT * FROM mysqltest1.v_ti;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
INSERT INTO mysqltest1.v_ts VALUES (100);
INSERT INTO mysqltest1.v_ti VALUES (100);
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
UPDATE mysqltest1.v_ts SET x= 200 WHERE x = 100;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
UPDATE mysqltest1.v_ts SET x= 200;
UPDATE mysqltest1.v_tu SET x= 200 WHERE x = 100;
UPDATE mysqltest1.v_tus SET x= 200 WHERE x = 100;
UPDATE mysqltest1.v_tu SET x= 200;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
DELETE FROM mysqltest1.v_ts WHERE x= 200;
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
DELETE FROM mysqltest1.v_ts;
--error 1143
--error ER_COLUMNACCESS_DENIED_ERROR
DELETE FROM mysqltest1.v_td WHERE x= 200;
DELETE FROM mysqltest1.v_tds WHERE x= 200;
DELETE FROM mysqltest1.v_td;
CONNECTION default;
connection default;
disconnect n1;
DROP VIEW mysqltest1.v_tds;
DROP VIEW mysqltest1.v_td;
DROP VIEW mysqltest1.v_tus;
......@@ -777,21 +782,21 @@ DROP USER readonly@localhost;
DROP DATABASE mysqltest1;
#
# BUG#14875: Bad view DEFINER makes SHOW CREATE VIEW fail
# Bug#14875 Bad view DEFINER makes SHOW CREATE VIEW fail
#
CREATE TABLE t1 (a INT PRIMARY KEY);
INSERT INTO t1 VALUES (1), (2), (3);
CREATE DEFINER = 'no-such-user'@localhost VIEW v AS SELECT a from t1;
#--warning 1448
#--warning ER_VIEW_OTHER_USER
SHOW CREATE VIEW v;
--error 1449
--error ER_NO_SUCH_USER
SELECT * FROM v;
DROP VIEW v;
DROP TABLE t1;
USE test;
#
# Bug#20363: Create view on just created view is now denied
# Bug#20363 Create view on just created view is now denied
#
eval CREATE USER mysqltest_db1@localhost identified by 'PWD';
eval GRANT ALL ON mysqltest_db1.* TO mysqltest_db1@localhost WITH GRANT OPTION;
......@@ -822,6 +827,7 @@ SELECT * FROM view2;
SELECT * from view3;
connection default;
disconnect session1;
DROP VIEW mysqltest_db1.view3;
DROP VIEW mysqltest_db1.view2;
DROP VIEW mysqltest_db1.view1;
......@@ -829,7 +835,7 @@ DROP TABLE mysqltest_db1.t1;
DROP SCHEMA mysqltest_db1;
DROP USER mysqltest_db1@localhost;
#
# BUG#20482: failure on Create join view with sources views/tables
# Bug#20482 failure on Create join view with sources views/tables
# in different schemas
#
--disable_warnings
......@@ -851,8 +857,8 @@ DROP DATABASE test1;
#
# BUG#20570: CURRENT_USER() in a VIEW with SQL SECURITY DEFINER
# returns invoker name
# Bug#20570 CURRENT_USER() in a VIEW with SQL SECURITY DEFINER returns
# invoker name
#
--disable_warnings
DROP VIEW IF EXISTS v1;
......@@ -911,7 +917,7 @@ DROP USER mysqltest_u1@localhost;
#
# Bug#17254: Error for DEFINER security on VIEW provides too much info
# Bug#17254 Error for DEFINER security on VIEW provides too much info
#
connect (root,localhost,root,,);
connection root;
......@@ -935,12 +941,12 @@ DROP USER def_17254@localhost;
connect (inv,localhost,inv_17254,,db17254);
connection inv;
--echo for a user
--error 1142
--error ER_TABLEACCESS_DENIED_ERROR
SELECT * FROM v1;
connection root;
--echo for a superuser
--error 1449
--error ER_NO_SUCH_USER
SELECT * FROM v1;
DROP USER inv_17254@localhost;
DROP DATABASE db17254;
......@@ -949,7 +955,7 @@ disconnect inv;
#
# BUG#24404: strange bug with view+permission+prepared statement
# Bug#24404 strange bug with view+permission+prepared statement
#
--disable_warnings
DROP DATABASE IF EXISTS mysqltest_db1;
......@@ -1017,7 +1023,7 @@ DROP USER mysqltest_u1@localhost;
DROP USER mysqltest_u2@localhost;
#
# Bug#26813: The SUPER privilege is wrongly required to alter a view created
# Bug#26813 The SUPER privilege is wrongly required to alter a view created
# by another user.
#
connection root;
......@@ -1050,7 +1056,7 @@ DROP DATABASE db26813;
disconnect u1;
--echo #
--echo # Bug#29908: A user can gain additional access through the ALTER VIEW.
--echo # Bug#29908 A user can gain additional access through the ALTER VIEW.
--echo #
connection root;
CREATE DATABASE mysqltest_29908;
......@@ -1095,7 +1101,7 @@ disconnect u2;
--echo #######################################################################
#
# BUG#24040: Create View don't succed with "all privileges" on a database.
# Bug#24040 Create View don't succed with "all privileges" on a database.
#
# Prepare.
......@@ -1179,7 +1185,7 @@ SELECT * FROM mysqltest1.t4;
# Cleanup.
-- disconnect bug24040_con
disconnect bug24040_con;
DROP DATABASE mysqltest1;
DROP DATABASE mysqltest2;
......@@ -1187,7 +1193,7 @@ DROP USER mysqltest_u1@localhost;
#
# Bug #41354: Access control is bypassed when all columns of a view are
# Bug#41354 Access control is bypassed when all columns of a view are
# selected by * wildcard
CREATE DATABASE db1;
......@@ -1202,7 +1208,6 @@ connect (addconfoo, localhost, foo,,);
connection addconfoo;
USE db1;
SELECT f1 FROM t1;
--error ER_COLUMNACCESS_DENIED_ERROR
SELECT f2 FROM t1;
......@@ -1216,8 +1221,9 @@ SELECT f2 FROM v1;
SELECT * FROM v1;
connection default;
USE test;
disconnect root;
disconnect addconfoo;
USE test;
REVOKE SELECT (f1) ON db1.t1 FROM foo;
REVOKE SELECT (f1) ON db1.v1 FROM foo;
DROP USER foo;
......@@ -1225,4 +1231,8 @@ DROP VIEW db1.v1;
DROP TABLE db1.t1;
DROP DATABASE db1;
connection default;
--echo End of 5.0 tests.
# Wait till we reached the initial number of concurrent sessions
--source include/wait_until_count_sessions.inc
mysql-test/t/wait_timeout.test
View file @ 7c4e55cb
......@@ -2,7 +2,7 @@
-- source include/not_embedded.inc
#
# Bug #8731: wait_timeout does not work on Mac OS X
# Bug#8731 wait_timeout does not work on Mac OS X
#
......@@ -87,6 +87,7 @@ while (!`select @aborted_clients`)
}
}
--enable_query_log
disconnect wait_con;
connection con1;
# When the connection is closed in this way, the error code should
......@@ -97,3 +98,5 @@ select 2;
--enable_reconnect
select 3;
disconnect con1;
# The last connect is to keep tools checking the current test happy.
connect (default,localhost,root,,test,,);
mysql-test/t/xa.test
View file @ 7c4e55cb
......@@ -2,6 +2,10 @@
# WL#1756
#
-- source include/have_innodb.inc
# Save the initial number of concurrent sessions
--source include/count_sessions.inc
--disable_warnings
drop table if exists t1, t2;
--enable_warnings
......@@ -14,10 +18,10 @@ xa rollback 'test1';
select * from t1;
xa start 'test2';
--error 1399
--error ER_XAER_RMFAIL
xa start 'test-bad';
insert t1 values (20);
--error 1399
--error ER_XAER_RMFAIL
xa prepare 'test2';
xa end 'test2';
xa prepare 'test2';
......@@ -27,22 +31,22 @@ select * from t1;
xa start 'testa','testb';
insert t1 values (30);
--error 1399
--error ER_XAER_RMFAIL
commit;
xa end 'testa','testb';
--error 1399
--error ER_XAER_RMFAIL
begin;
--error 1399
--error ER_XAER_RMFAIL
create table t2 (a int);
connect (con1,localhost,root,,);
connection con1;
--error 1440
--error ER_XAER_DUPID
xa start 'testa','testb';
--error 1440
--error ER_XAER_DUPID
xa start 'testa','testb', 123;
# gtrid [ , bqual [ , formatID ] ]
......@@ -51,7 +55,7 @@ insert t1 values (40);
xa end 'testb',' 0@P`',11;
xa prepare 'testb',0x2030405060,11;
--error 1399
--error ER_XAER_RMFAIL
start transaction;
xa recover;
......@@ -64,11 +68,11 @@ xa prepare 'testa','testb';
xa recover;
--error 1397
--error ER_XAER_NOTA
xa commit 'testb',0x2030405060,11;
xa rollback 'testa','testb';
--error 1064
--error ER_PARSE_ERROR
xa start 'zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz';
select * from t1;
......@@ -119,3 +123,7 @@ xa start 'a','c';
drop table t1;
--echo End of 5.0 tests
# Wait till all disconnects are completed
--source include/wait_until_count_sessions.inc
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7