Many files:

  Fix bug #6817 and bug #6827 : do not crash the server if the buffer pool becomes filled by the locks of ONE huge transaction, return error 1206 instead; do not crash the server, but return error if we cannot allocate memory for the buffer pool at a mysqld startup
parent a3d2aaf9
......@@ -547,8 +547,9 @@ buf_pool_init(
}
/*----------------------------------------*/
} else {
buf_pool->frame_mem = ut_malloc(
UNIV_PAGE_SIZE * (n_frames + 1));
buf_pool->frame_mem = ut_malloc_low(
UNIV_PAGE_SIZE * (n_frames + 1),
TRUE, FALSE);
}
if (buf_pool->frame_mem == NULL) {
......
......@@ -42,6 +42,10 @@ initial segment in buf_LRU_get_recent_limit */
#define BUF_LRU_INITIAL_RATIO 8
/* If we switch on the InnoDB monitor because there are too few available
frames in the buffer pool, we set this to TRUE */
ibool buf_lru_switched_on_innodb_mon = FALSE;
/**********************************************************************
Takes a block out of the LRU list and page hash table and sets the block
state to BUF_BLOCK_REMOVE_HASH. */
......@@ -287,6 +291,32 @@ buf_LRU_try_free_flushed_blocks(void)
mutex_exit(&(buf_pool->mutex));
}
/**********************************************************************
Returns TRUE if less than 15 % of the buffer pool is available. This can be
used in heuristics to prevent huge transactions eating up the whole buffer
pool for their locks. */
ibool
buf_LRU_buf_pool_running_out(void)
/*==============================*/
/* out: TRUE if less than 15 % of buffer pool
left */
{
ibool ret = FALSE;
mutex_enter(&(buf_pool->mutex));
if (!recv_recovery_on && UT_LIST_GET_LEN(buf_pool->free)
+ UT_LIST_GET_LEN(buf_pool->LRU) < buf_pool->max_size / 7) {
ret = TRUE;
}
mutex_exit(&(buf_pool->mutex));
return(ret);
}
/**********************************************************************
Returns a free block from buf_pool. The block is taken off the free list.
If it is empty, blocks are moved from the end of the LRU list to the free
......@@ -325,7 +355,8 @@ loop:
} else if (!recv_recovery_on && UT_LIST_GET_LEN(buf_pool->free)
+ UT_LIST_GET_LEN(buf_pool->LRU) < buf_pool->max_size / 5) {
if (!srv_print_innodb_monitor) {
if (!buf_lru_switched_on_innodb_mon) {
/* Over 80 % of the buffer pool is occupied by lock
heaps or the adaptive hash index. This may be a memory
......@@ -342,16 +373,18 @@ loop:
"InnoDB: lock heap and hash index sizes.\n",
(ulong) (buf_pool->curr_size / (1024 * 1024 / UNIV_PAGE_SIZE)));
buf_lru_switched_on_innodb_mon = TRUE;
srv_print_innodb_monitor = TRUE;
os_event_set(srv_lock_timeout_thread_event);
}
} else if (!recv_recovery_on && UT_LIST_GET_LEN(buf_pool->free)
+ UT_LIST_GET_LEN(buf_pool->LRU) < buf_pool->max_size / 4) {
} else if (buf_lru_switched_on_innodb_mon) {
/* Switch off the InnoDB Monitor; this is a simple way
to stop the monitor if the situation becomes less urgent,
but may also surprise users! */
but may also surprise users if the user also switched on the
monitor! */
buf_lru_switched_on_innodb_mon = FALSE;
srv_print_innodb_monitor = FALSE;
}
......
......@@ -25,6 +25,16 @@ wasted. */
void
buf_LRU_try_free_flushed_blocks(void);
/*==================================*/
/**********************************************************************
Returns TRUE if less than 15 % of the buffer pool is available. This can be
used in heuristics to prevent huge transactions eating up the whole buffer
pool for their locks. */
ibool
buf_LRU_buf_pool_running_out(void);
/*==============================*/
/* out: TRUE if less than 15 % of buffer pool
left */
/*#######################################################################
These are low-level functions
......
......@@ -53,6 +53,10 @@ Created 5/24/1996 Heikki Tuuri
name already exists */
#define DB_TABLESPACE_DELETED 44 /* tablespace does not exist or is
being dropped right now */
#define DB_LOCK_TABLE_FULL 45 /* lock structs have exhausted the
buffer pool (for big transactions,
InnoDB stores the lock structs in the
buffer pool) */
/* The following are partial failure codes */
#define DB_FAIL 1000
......
......@@ -120,6 +120,7 @@ row_search_for_mysql(
/* out: DB_SUCCESS,
DB_RECORD_NOT_FOUND,
DB_END_OF_INDEX, DB_DEADLOCK,
DB_LOCK_TABLE_FULL,
or DB_TOO_BIG_RECORD */
byte* buf, /* in/out: buffer for the fetched
row in the MySQL format */
......
......@@ -38,8 +38,10 @@ ut_malloc_low(
/*==========*/
/* out, own: allocated memory */
ulint n, /* in: number of bytes to allocate */
ibool set_to_zero); /* in: TRUE if allocated memory should be set
ibool set_to_zero, /* in: TRUE if allocated memory should be set
to zero if UNIV_SET_MEM_TO_ZERO is defined */
ibool assert_on_error); /* in: if TRUE, we crash mysqld if the memory
cannot be allocated */
/**************************************************************************
Allocates memory. Sets it also to zero if UNIV_SET_MEM_TO_ZERO is
defined. */
......
......@@ -199,7 +199,7 @@ mem_pool_create(
but only when allocated at a higher level in mem0mem.c.
This is to avoid masking useful Purify warnings. */
pool->buf = ut_malloc_low(size, FALSE);
pool->buf = ut_malloc_low(size, FALSE, TRUE);
pool->size = size;
mutex_create(&(pool->mutex));
......
......@@ -308,7 +308,8 @@ handle_new_error:
return(TRUE);
} else if (err == DB_DEADLOCK || err == DB_LOCK_WAIT_TIMEOUT) {
} else if (err == DB_DEADLOCK || err == DB_LOCK_WAIT_TIMEOUT
|| err == DB_LOCK_TABLE_FULL) {
/* Roll back the whole transaction; this resolution was added
to version 3.23.43 */
......
......@@ -730,8 +730,18 @@ sel_set_rec_lock(
ulint type, /* in: LOCK_ORDINARY, LOCK_GAP, or LOC_REC_NOT_GAP */
que_thr_t* thr) /* in: query thread */
{
trx_t* trx;
ulint err;
trx = thr_get_trx(thr);
if (UT_LIST_GET_LEN(trx->trx_locks) > 10000) {
if (buf_LRU_buf_pool_running_out()) {
return(DB_LOCK_TABLE_FULL);
}
}
if (index->type & DICT_CLUSTERED) {
err = lock_clust_rec_read_check_and_lock(0, rec, index, mode,
type, thr);
......@@ -2765,6 +2775,7 @@ row_search_for_mysql(
/* out: DB_SUCCESS,
DB_RECORD_NOT_FOUND,
DB_END_OF_INDEX, DB_DEADLOCK,
DB_LOCK_TABLE_FULL,
or DB_TOO_BIG_RECORD */
byte* buf, /* in/out: buffer for the fetched
row in the MySQL format */
......
......@@ -1172,6 +1172,9 @@ NetWare. */
}
if (ret == NULL) {
fprintf(stderr,
"InnoDB: Fatal error: cannot allocate the memory for the buffer pool\n");
return(DB_ERROR);
}
......
......@@ -61,8 +61,10 @@ ut_malloc_low(
/*==========*/
/* out, own: allocated memory */
ulint n, /* in: number of bytes to allocate */
ibool set_to_zero) /* in: TRUE if allocated memory should be set
ibool set_to_zero, /* in: TRUE if allocated memory should be set
to zero if UNIV_SET_MEM_TO_ZERO is defined */
ibool assert_on_error) /* in: if TRUE, we crash mysqld if the memory
cannot be allocated */
{
void* ret;
......@@ -86,9 +88,7 @@ ut_malloc_low(
"InnoDB: Check if you should increase the swap file or\n"
"InnoDB: ulimits of your operating system.\n"
"InnoDB: On FreeBSD check you have compiled the OS with\n"
"InnoDB: a big enough maximum process size.\n"
"InnoDB: We now intentionally generate a seg fault so that\n"
"InnoDB: on Linux we get a stack trace.\n",
"InnoDB: a big enough maximum process size.\n",
(ulong) n, (ulong) ut_total_allocated_memory,
#ifdef __WIN__
(ulong) GetLastError()
......@@ -110,7 +110,15 @@ ut_malloc_low(
/* Intentional segfault on NetWare causes an abend. Avoid this
by graceful exit handling in ut_a(). */
#if (!defined __NETWARE__)
if (assert_on_error) {
fprintf(stderr,
"InnoDB: We now intentionally generate a seg fault so that\n"
"InnoDB: on Linux we get a stack trace.\n");
if (*ut_mem_null_ptr) ut_mem_null_ptr = 0;
} else {
return(NULL);
}
#else
ut_a(0);
#endif
......@@ -144,7 +152,7 @@ ut_malloc(
/* out, own: allocated memory */
ulint n) /* in: number of bytes to allocate */
{
return(ut_malloc_low(n, TRUE));
return(ut_malloc_low(n, TRUE, TRUE));
}
/**************************************************************************
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment