Skip to content

M
mariadb
Commit e7575da7 authored by monty@hundin.mysql.fi's avatar monty@hundin.mysql.fi
Browse files
Options

Portability fixes 

Added record_rnd_buffer
Added --safe-user-create
Fix for ALTER TABLE RENAME on windows
parent 410faef6
Hide whitespace changes
Inline Side-by-side
Showing with 367 additions and 186 deletions
Docs/manual.texi
View file @ e7575da7
......@@ -14522,15 +14522,10 @@ Skip some optimize stages. Implies @code{--skip-delay-key-write}.
@item --safe-show-database
Don't show databases for which the user doesn't have any privileges.
@item --secure
IP numbers returned by the @code{gethostbyname()} system call are
checked to make sure they resolve back to the original hostname. This
makes it harder for someone on the outside to get access by pretending
to be another host. This option also adds some sanity checks of
hostnames. The option is turned off by default in @strong{MySQL} Version 3.21
because sometimes it takes a long time to perform backward resolutions.
@strong{MySQL} Version 3.22 caches hostnames (unless @code{--skip-host-cache}
is used) and has this option enabled by default.
@item --safe-user-create
If this is enabled, a user can't create new users with the GRANT
command, if the user doesn't have @code{INSERT} privilege to the
@code{mysql.user} table or any column in this table.
@item --skip-concurrent-insert
Turn off the ability to select and insert at the same time on @code{MyISAM}
......@@ -15313,11 +15308,10 @@ by using @code{LOAD DATA} to load @file{/etc/passwd} into a table, which
can then be read with @code{SELECT}.
@item
If you don't trust your DNS, you should use IP numbers instead of hostnames
in the grant tables. In principle, the @code{--secure} option to
@code{mysqld} should make hostnames safe. In any case, you should be very
careful about creating grant table entries using hostname values that
contain wild cards!
If you don't trust your DNS, you should use IP numbers instead of
hostnames in the grant tables. In any case, you should be very careful
about creating grant table entries using hostname values that contain
wild cards!
@item
If you want to restrict the number of connections for a single user, you
......@@ -15325,21 +15319,31 @@ can do this by setting the @code{max_user_connections} variable in
@code{mysqld}.
@end itemize
@node Privileges options, What Privileges, Security, Privilege system
@subsection Startup Options for @code{mysqld} Concerning Security
The following @code{mysqld} options affect networking security:
The following @code{mysqld} options affect security:
@table @code
@item --secure
IP numbers returned by the @code{gethostbyname()} system call are
checked to make sure they resolve back to the original hostname. This
makes it harder for someone on the outside to get access by pretending
to be another host. This option also adds some sanity checks of
hostnames. The option is turned off by default in @strong{MySQL} Version
3.21 because sometimes it takes a long time to perform backward resolutions.
@strong{MySQL} Version 3.22 caches hostnames and has this option enabled by
default.
@item --safe-show-database
With this option,
@code{SHOW DATABASES} returns only those databases for which the user has
some kind of privilege.
@item @code{--safe-user-create}
If this is enabled, an user can't create new users with the @code{GRANT}
command, if the user doesn't have @code{INSERT} privilege to the
@code{mysql.user} table. If you want to give a user access to just create
new users with those privileges that the user has right to grant, you should
give the user the following privilege:
@example
GRANT INSERT(user) on mysql.user to 'user'@'hostname';
@end example
This will ensure that the user can't change any privilege columns directly,
but has to use the @code{GRANT} command to give privileges to other users.
@item --skip-grant-tables
This option causes the server not to use the privilege system at all. This
......@@ -15361,11 +15365,6 @@ support Unix sockets.
With this option, the
@code{SHOW DATABASES} statement doesn't return anything.
@item --safe-show-database
With this option,
@code{SHOW DATABASES} returns only those databases for which the user has
some kind of privilege.
@end table
......@@ -19812,6 +19811,11 @@ Each thread that does a sequential scan allocates a buffer of this
size for each table it scans. If you do many sequential scans, you may
want to increase this value.
@item @code{record_rnd_buffer}
When reading rows in sorted order after a sort, the rows are read through this
buffer to avoid a disk seeks. If not set, then it's set to the value of
@code{record_buffer}.
@item @code{query_buffer_size}
The initial allocation of the query buffer. If most of your queries are
long (like when inserting blobs), you should increase this!
......@@ -25946,6 +25950,7 @@ net_read_timeout current value: 30
net_write_timeout current value: 60
query_buffer_size current value: 0
record_buffer current value: 131072
record_rnd_buffer current value: 131072
slow_launch_time current value: 2
sort_buffer current value: 2097116
table_cache current value: 64
......@@ -26006,6 +26011,11 @@ shell> safe_mysqld -O key_buffer=512k -O sort_buffer=16k \
-O table_cache=32 -O record_buffer=8k -O net_buffer=1K &
@end example
If you are doing a @code{GROUP BY} or @code{ORDER BY} on files that are
much bigger than your available memory you should increase the value of
@code{record_rnd_buffer} to speed up the reading of rows after the sorting
is done.
When you have installed @strong{MySQL}, the @file{support-files} directory will
contain some different @code{my.cnf} example files, @file{my-huge.cnf},
@file{my-large.cnf}, @file{my-medium.cnf}, and @file{my-small.cnf}, you can
......@@ -26167,6 +26177,11 @@ common we may add general support for memory mapping.
Each request doing a sequential scan over a table allocates a read buffer
(variable @code{record_buffer}).
@item
When reading rows in 'random' order (for example after a sort) a
random-read buffer is allocated to avoid disk seeks.
(variable @code{record_rnd_buffer}).
@item
All joins are done in one pass, and most joins can be done without even
using a temporary table. Most temporary tables are memory-based (HEAP)
......@@ -27642,7 +27657,7 @@ significant decimal digits that will be stored for values, and
@code{2} (@code{scale}) represents the number of digits that will be
stored following the decimal point. In this case, therefore, the range
of values that can be stored in the @code{salary} column is from
@code{-9999999.99} to @code{9999999.99}. In ANSI/ISO SQL92, the syntax
@code{-999999.99} to @code{9999999.99}. In ANSI/ISO SQL92, the syntax
@code{DECIMAL(p)} is equivalent to @code{DECIMAL(p,0)}. Similarly, the
syntax @code{DECIMAL} is equivalent to @code{DECIMAL(p,0)}, where the
implementation is allowed to decide the value of @code{p}.
......@@ -29145,6 +29160,15 @@ mysql> select INTERVAL(22, 23, 30, 44, 200);
Normally, if any expression in a string comparison is case sensitive, the
comparison is performed in case-sensitive fashion.
If you are comparing case sensitive string with any of the standard
operators (@code{=}, @code{<>}..., but not @code{LIKE}) end space will
be ignored.
@example
mysql> select "a" ="A ";
-> 1
@end example
@table @code
@findex LIKE
@item expr LIKE pat [ESCAPE 'escape-char']
......@@ -37893,12 +37917,16 @@ To make Access work:
@itemize @bullet
@item
If you are using Access 2000, you should get and install the newest
Microsoft MDAC (@code{Microsoft Data Access Components}) from
@uref{http://www.microsoft.com/data}. This will fix the following bug
in Access: when you export data to @strong{MySQL}, the table and column
names aren't specified. Another way to around this bug is to upgrade to
MyODBC Version 2.50.33 and @strong{MySQL} Version 3.23.x, which together
provide a workaround for this bug!
(version 2.6 or above) Microsoft MDAC (@code{Microsoft Data Access
Components}) from @uref{http://www.microsoft.com/data}. This will fix
the following bug in Access: when you export data to @strong{MySQL}, the
table and column names aren't specified. Another way to around this bug
is to upgrade to MyODBC Version 2.50.33 and @strong{MySQL} Version
3.23.x, which together provide a workaround for this bug!
You should also get and apply the Microsoft Jet 4.0 Service Pack 5 (SP5)
which can be found here
@uref{http://support.microsoft.com/support/kb/articles/Q 239/1/14.ASP}.
Note that if you are using @strong{MySQL} Version 3.22, you must to apply the
MDAC patch and use MyODBC 2.50.32 or 2.50.34 and above to go around
......@@ -40033,7 +40061,7 @@ other APIs.
* C API function overview:: C API Function Overview
* C API functions:: C API Function Descriptions
* C API problems::
* Thread-safe clients::
* Thread-safe clients:: How to Make a Thread-safe Client
@end menu
The C API code is distributed with @strong{MySQL}. It is included in the
......@@ -42834,6 +42862,34 @@ If you program with POSIX threads, you can use
establish and release a mutex lock.
@end itemize
You need to know the following if you have a thread that is calling
MySQL functions, but that thread has not created the connection to the
MySQL database:
When you call @code{mysql_init()} or @code{mysql_connect()}, MySQL will
create a thread specific variable for the thread that is used by the
debug library (among other things).
If you have in a thread call a MySQL function, before a thread has
called @code{mysql_init()} or @code{mysql_connect()}, the thread will
not have the necessary thread specific variables in place and you are
likely to end up with a core dump sooner or later.
The get things to work smoothly you have to do the following:
@enumerate
@item
Call @code{my_init()} at the start of your program if it calls
any other MySQL function before calling @code{mysql_real_connect()}.
@item
Call @code{my_thread_init()} in the thread handler before calling
any MySQL function.
@item
In the thread, call @code{my_thread_end()} before calling
@code{pthread_exit()}. This will free the memory used by MySQL thread
specific variables.
@end enumerate
You may get some errors because of undefined symbols when linking your
client with @code{mysqlclient_r}. In most cases this is because you haven't
included the thread libraries on the link/compile line.
......@@ -45434,6 +45490,8 @@ Romanian error messages.
Hungarian error messages.
@item Roberto M. Serqueira
Portugise error messages.
@item Carsten H. Pedersen
Danish error messages
@item David Sacerdote @email{davids@@secnet.com}
Ideas for secure checking of DNS hostnames.
@item Wei-Jou Chen @email{jou@@nematic.ieo.nctu.edu.tw}
......@@ -45672,7 +45730,7 @@ users use this code as the rest of the code and because of this we are
not yet 100% confident in this code.
@menu
* News-3.23.41::
* News-3.23.41:: Changes in release 3.23.41
* News-3.23.40:: Changes in release 3.23.40
* News-3.23.39:: Changes in release 3.23.39
* News-3.23.38:: Changes in release 3.23.38
......@@ -45721,8 +45779,35 @@ not yet 100% confident in this code.
@appendixsubsec Changes in release 3.23.41
@itemize @bullet
@item
InnoDB now supports < 4 GB rows. The former limit was 8000 bytes.
@item
The @code{doublewrite} file flush method is used in InnoDB.
It reduces the need for Unix fsync calls to a fraction and
improves performance on most Unix flavors.
@item
You can now use the InnoDB Monitor to print a lot of InnoDB state
information, including locks, to the standard output; useful in
performance tuning.
@item
Several bugs which could cause hangs in InnoDB have been fixed.
@item
Split @code{record_buffer} to @code{record_buffer} and
@code{record_rnd_buffer}. To make things compatible to previous MySQL
versions, if @code{record_rnd_buffer} is not set, then it takes the
value of @code{record_buffer}.
@item
Fixed optimizing bug in @code{ORDER BY} where some @code{ORDER BY} parts
where wrongly removed.
@item
Fixed overflow bug with @code{ALTER TABLE} and @code{MERGE} tables.
@item
Added prototypes for @code{my_thread_init()} and @code{my_thread_end()} to
@file{mysql_com.h}
@item
Added option @code{--safe-user-create} to @code{mysqld}.
@item
Added options to the @code{--ansi} startup options to let the user
decide which @code{ansi} options one to enable.
@end itemize
@node News-3.23.40, News-3.23.39, News-3.23.41, News-3.23.x
include/mysql_com.h
View file @ e7575da7
......@@ -218,17 +218,19 @@ my_bool check_scramble(const char *, const char *message,
unsigned long *salt,my_bool old_ver);
char *get_tty_password(char *opt_message);
void hash_password(unsigned long *result, const char *password);
#ifdef __cplusplus
}
#endif
/* Some other useful functions */
void my_init(void);
void load_defaults(const char *conf_file, const char **groups,
int *argc, char ***argv);
my_bool my_thread_init(void);
void my_thread_end(void);
#ifdef __cplusplus
}
#endif
#define NULL_LENGTH ((unsigned long) ~0) /* For net_store_length */
#ifdef __WIN__
......
include/mysqld_error.h
View file @ e7575da7
......@@ -211,4 +211,5 @@
#define ER_DROP_DB_WITH_READ_LOCK 1208
#define ER_CREATE_DB_WITH_READ_LOCK 1209
#define ER_WRONG_ARGUMENTS 1210
#define ER_ERROR_MESSAGES 211
#define ER_NO_PERMISSON_TO_CREATE_USER 1211
#define ER_ERROR_MESSAGES 212
innobase/buf/buf0flu.c
View file @ e7575da7
......@@ -10,6 +10,7 @@ Created 11/11/1995 Heikki Tuuri
#ifdef UNIV_NONINL
#include "buf0flu.ic"
#include "trx0sys.h"
#endif
#include "ut0byte.h"
......
innobase/include/univ.i
View file @ e7575da7
......@@ -9,12 +9,10 @@ Created 1/20/1994 Heikki Tuuri
#ifndef univ_i
#define univ_i
#if (defined(_WIN32) || defined(_WIN64))
#if (defined(_WIN32) || defined(_WIN64)) && !defined(MYSQL_SERVER)
#define __WIN__
#ifndef MYSQL_SERVER
#include <windows.h>
#endif
/* If you want to check for errors with compiler level -W4,
comment out the above include of windows.h and let the following defines
......
mysql-test/t/distinct.test
View file @ e7575da7
......@@ -198,3 +198,12 @@ insert into t2 values (1,1),(2,2),(3,3);
select t1.a,sec_to_time(sum(time_to_sec(t))) from t1 left join t2 on (t1.b=t2.a) group by t1.a,t2.b;
select distinct t1.a,sec_to_time(sum(time_to_sec(t))) from t1 left join t2 on (t1.b=t2.a) group by t1.a,t2.b;
drop table t1,t2;
#
# Test problem with DISTINCT and HAVING
#
create table t1 (a int not null,b char(5), c text);
insert into t1 (a) values (1),(2),(3),(4),(1),(2),(3),(4);
select distinct a from t1 group by b,a having a > 2 order by a desc;
select distinct a,c from t1 group by b,c,a having a > 2 order by a desc;
drop table t1;
sql/mysql_priv.h
View file @ e7575da7
......@@ -251,6 +251,7 @@ void kill_mysql(void);
void close_connection(NET *net,uint errcode=0,bool lock=1);
bool check_access(THD *thd,uint access,const char *db=0,uint *save_priv=0,
bool no_grant=0);
bool check_table_access(THD *thd,uint want_access,TABLE_LIST *tables);
bool check_process_priv(THD *thd=0);
int generate_table(THD *thd, TABLE_LIST *table_list,
......@@ -530,10 +531,10 @@ extern ulong keybuff_size,sortbuff_size,max_item_sort_length,table_cache_size,
what_to_log,flush_time,
max_tmp_tables,max_heap_table_size,query_buff_size,
lower_case_table_names,thread_stack,thread_stack_min,
binlog_cache_size, max_binlog_cache_size;
binlog_cache_size, max_binlog_cache_size, record_rnd_cache_size;
extern ulong specialflag, current_pid;
extern bool low_priority_updates, using_update_log;
extern bool opt_sql_bin_update, opt_safe_show_db, opt_warnings;
extern bool low_priority_updates, using_update_log,opt_warnings;
extern bool opt_sql_bin_update, opt_safe_show_db, opt_safe_user_create;
extern char language[LIBLEN],reg_ext[FN_EXTLEN],blob_newline;
extern const char **errmesg; /* Error messages */
extern const char *default_tx_isolation_name;
......
sql/mysqld.cc
View file @ e7575da7
......@@ -213,7 +213,8 @@ static bool opt_log,opt_update_log,opt_bin_log,opt_slow_log,opt_noacl,
opt_disable_networking=0, opt_bootstrap=0,opt_skip_show_db=0,
opt_ansi_mode=0,opt_myisam_log=0,
opt_large_files=sizeof(my_off_t) > 4;
bool opt_sql_bin_update = 0, opt_log_slave_updates = 0, opt_safe_show_db=0;
bool opt_sql_bin_update = 0, opt_log_slave_updates = 0, opt_safe_show_db=0,
opt_safe_user_create=0;
FILE *bootstrap_file=0;
int segfaulted = 0; // ensure we do not enter SIGSEGV handler twice
extern MASTER_INFO glob_mi;
......@@ -261,7 +262,7 @@ ulong keybuff_size,sortbuff_size,max_item_sort_length,table_cache_size,
query_buff_size, lower_case_table_names, mysqld_net_retry_count,
net_interactive_timeout, slow_launch_time = 2L,
net_read_timeout,net_write_timeout,slave_open_temp_tables=0,
open_files_limit=0, max_binlog_size;
open_files_limit=0, max_binlog_size, record_rnd_cache_size;
ulong slave_net_timeout;
ulong thread_cache_size=0, binlog_cache_size=0, max_binlog_cache_size=0;
volatile ulong cached_thread_count=0;
......@@ -1481,9 +1482,13 @@ static void open_log(MYSQL_LOG *log, const char *hostname,
// get rid of extention if the log is binary to avoid problems
if (type == LOG_BIN)
{
char* p = strrchr((char*) opt_name, FN_EXTCHAR);
char *p = fn_ext(opt_name);
if (p)
*p = 0;
{
uint length=(uint) (p-opt_name);
strmake(tmp,opt_name,min(length,FN_REFLEN));
opt_name=tmp;
}
}
log->open(opt_name,type);
}
......@@ -2471,7 +2476,8 @@ enum options {
OPT_GEMINI_FLUSH_LOG, OPT_GEMINI_RECOVER,
OPT_GEMINI_UNBUFFERED_IO, OPT_SKIP_SAFEMALLOC,
OPT_SKIP_STACK_TRACE, OPT_SKIP_SYMLINKS,
OPT_MAX_BINLOG_DUMP_EVENTS, OPT_SPORADIC_BINLOG_DUMP_FAIL
OPT_MAX_BINLOG_DUMP_EVENTS, OPT_SPORADIC_BINLOG_DUMP_FAIL,
OPT_SAFE_USER_CREATE
};
static struct option long_options[] = {
......@@ -2583,7 +2589,7 @@ static struct option long_options[] = {
(int) OPT_REPLICATE_REWRITE_DB},
{"safe-mode", no_argument, 0, (int) OPT_SAFE},
{"safe-show-database", no_argument, 0, (int) OPT_SAFE_SHOW_DB},
{"socket", required_argument, 0, (int) OPT_SOCKET},
{"safe-user-create", no_argument, 0, (int) OPT_SAFE_USER_CREATE},
{"server-id", required_argument, 0, (int) OPT_SERVER_ID},
{"set-variable", required_argument, 0, 'O'},
{"skip-bdb", no_argument, 0, (int) OPT_BDB_SKIP},
......@@ -2603,6 +2609,7 @@ static struct option long_options[] = {
{"skip-stack-trace", no_argument, 0, (int) OPT_SKIP_STACK_TRACE},
{"skip-symlink", no_argument, 0, (int) OPT_SKIP_SYMLINKS},
{"skip-thread-priority", no_argument, 0, (int) OPT_SKIP_PRIOR},
{"socket", required_argument, 0, (int) OPT_SOCKET},
{"sql-bin-update-same", no_argument, 0, (int) OPT_SQL_BIN_UPDATE_SAME},
#include "sslopt-longopts.h"
#ifdef __WIN__
......@@ -2741,6 +2748,8 @@ CHANGEABLE_VAR changeable_vars[] = {
0, MALLOC_OVERHEAD, (long) ~0, MALLOC_OVERHEAD, IO_SIZE },
{ "record_buffer", (long*) &my_default_record_cache_size,
128*1024L, IO_SIZE*2+MALLOC_OVERHEAD, ~0L, MALLOC_OVERHEAD, IO_SIZE },
{ "record_rnd_buffer", (long*) &record_rnd_cache_size,
0, IO_SIZE*2+MALLOC_OVERHEAD, ~0L, MALLOC_OVERHEAD, IO_SIZE },
{ "slave_net_timeout", (long*) &slave_net_timeout,
SLAVE_NET_TIMEOUT, 1, 65535, 0, 1 },
{ "slow_launch_time", (long*) &slow_launch_time,
......@@ -2856,6 +2865,7 @@ struct show_var_st init_vars[]= {
{"port", (char*) &mysql_port, SHOW_INT},
{"protocol_version", (char*) &protocol_version, SHOW_INT},
{"record_buffer", (char*) &my_default_record_cache_size,SHOW_LONG},
{"record_rnd_buffer", (char*) &record_rnd_cache_size, SHOW_LONG},
{"query_buffer_size", (char*) &query_buff_size, SHOW_LONG},
{"safe_show_database", (char*) &opt_safe_show_db, SHOW_BOOL},
{"server_id", (char*) &server_id, SHOW_LONG},
......@@ -3030,6 +3040,8 @@ static void usage(void)
--safe-mode Skip some optimize stages (for testing)\n\
--safe-show-database Don't show databases for which the user has no\n\
privileges\n\
--safe-user-create Don't new users cretaion without privileges to the\n\
mysql.user table\n\
--skip-concurrent-insert\n\
Don't use concurrent insert with MyISAM\n\
--skip-delay-key-write\n\
......@@ -3747,6 +3759,9 @@ static void get_options(int argc,char **argv)
case OPT_SAFE_SHOW_DB:
opt_safe_show_db=1;
break;
case OPT_SAFE_USER_CREATE:
opt_safe_user_create=1;
break;
case OPT_SKIP_SAFEMALLOC:
#ifdef SAFEMALLOC
sf_malloc_quick=1;
......@@ -3770,6 +3785,9 @@ static void get_options(int argc,char **argv)
fix_paths();
default_table_type_name=ha_table_typelib.type_names[default_table_type-1];
default_tx_isolation_name=tx_isolation_typelib.type_names[default_tx_isolation];
/* To be deleted in MySQL 4.0 */
if (!record_rnd_cache_size)
record_rnd_cache_size=my_default_record_cache_size;
}
......
sql/records.cc
View file @ e7575da7
......@@ -66,7 +66,7 @@ void init_read_record(READ_RECORD *info,THD *thd, TABLE *table,
table->file->rnd_init(0);
if (! (specialflag & SPECIAL_SAFE_MODE) &&
my_default_record_cache_size &&
record_rnd_cache_size &&
!table->file->fast_key_read() &&
(table->db_stat & HA_READ_ONLY ||
table->reginfo.lock_type <= TL_READ_NO_INSERT) &&
......@@ -216,7 +216,7 @@ static int init_rr_cache(READ_RECORD *info)
info->reclength=ALIGN_SIZE(info->struct_length);
info->error_offset=info->table->reclength;
info->cache_records=my_default_record_cache_size/
info->cache_records=record_rnd_cache_size/
(info->reclength+info->struct_length);
rec_cache_size=info->cache_records*info->reclength;
info->rec_cache_size=info->cache_records*info->ref_length;
......
sql/share/czech/errmsg.txt
View file @ e7575da7
......@@ -221,3 +221,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/danish/errmsg.txt
View file @ e7575da7
......@@ -2,29 +2,29 @@
This file is public domain and comes with NO WARRANTY of any kind */
/* Knud Riishøjgård knudriis@post.tele.dk 99 &&
Carsten H. Pedersen, carsten.pedersen@bitbybit.dk oct. 1999 */
Carsten H. Pedersen, carsten.pedersen@bitbybit.dk oct. 1999 / aug. 2001. */
"hashchk",
"isamchk",
"NEJ",
"JA",
"Kan ikke oprette filen '%-.64s' (Fejlkode: %d)",
"Kan ikke opprette tabellen '%-.64s' (Fejlkode: %d)",
"Kan ikke oprette tabellen '%-.64s' (Fejlkode: %d)",
"Kan ikke oprette databasen '%-.64s'. Fejl %d",
"Kan ikke oprette databasen '%-.64s'. Databasen eksisterer",
"Kan ikke slette (droppe) '%-.64s'. Databasen eksisterer ikke",
"Fejl ved sletning (drop) af databasen (kan ikke slette '%-.64s', Fejl %d)",
"Fejl ved sletting af database (kan ikke slette biblioteket '%-.64s', Fejl %d)",
"Fejl ved sletting af database (kan ikke slette folderen '%-.64s', Fejl %d)",
"Fejl ved sletning af '%-.64s' (Fejlkode: %d)",
"Kan ikke læse posten i systembiblioteket",
"Kan ikke læse posten i systemfolderen",
"Kan ikke læse status af '%-.64s' (Fejlkode: %d)",
"Kan ikke læse aktive bibliotek (Fejlkode: %d)",
"Kan ikke læse aktive folder (Fejlkode: %d)",
"Kan ikke låse fil (Fejlkode: %d)",
"Kan ikke åbne fil: '%-.64s'. (Fejlkode: %d)",
"Kan ikke finde fila: '%-.64s' (Fejlkode: %d)",
"Kan ikke læse bibliotek '%-.64s' (Fejlkode: %d)",
"Kan ikke skifte bibliotek til '%-.64s' (Fejlkode: %d)",
"Posten erændret siden sidst læst '%-.64s'",
"Kan ikke læse folder '%-.64s' (Fejlkode: %d)",
"Kan ikke skifte folder til '%-.64s' (Fejlkode: %d)",
"Posten er ændret siden sidste læsning '%-.64s'",
"Ikke mere diskplads (%s). Venter på at få frigjort plads....",
"Kan ikke skrive, flere ens nøgler i tabellen '%-.64s'",
"Fejl ved lukning af '%-.64s' (Fejlkode: %d)",
......@@ -32,10 +32,10 @@
"Fejl ved omdøbning af '%-.64s' til '%-.64s' (Fejlkode: %d)",
"Fejl ved skriving av filen '%-.64s' (Fejlkode: %d)",
"'%-.64s' er låst mod opdateringer",
"Sortering afbrutt",
"Sortering afbrudt",
"View '%-.64s' eksisterer ikke for '%-.64s'",
"Modtog fejl %d fra tabel håndterer",
"Tabel håndtereren for '%-.64s' har ikke denne mulighed",
"Modtog fejl %d fra tabel håndteringen",
"Denne mulighed eksisterer ikke for tabeltypen '%-.64s'",
"Kan ikke finde posten i '%-.64s'",
"Forkert indhold i: '%-.64s'",
"Fejl i indeksfilen til tabellen '%-.64s', prøv at reparere den",
......@@ -43,95 +43,95 @@
"'%-.64s' er skrivebeskyttet",
"Ikke mere hukommelse. Genstart serveren og prøv igen (mangler %d bytes)",
"Ikke mere sorteringshukommelse. Øg sorteringshukommelse (sort buffer size) for serveren",
"Uventet sluttning af fil (eof) ved læsning af filen '%-.64s' (Fejlkode: %d)",
"For mange tilkoblinger (connections)",
"Uventet afslutning på fil (eof) ved læsning af filen '%-.64s' (Fejlkode: %d)",
"For mange forbindelser (connections)",
"Udgået for tråde/hukommelse",
"Kan ikke få værtsnavn for din adresse",
"Forkert håndtryk (handshake)",
"Adgang nægtet bruger: '%-.32s@%-.64s' til databasen '%-.64s'",
"Adgang nægtet bruger: '%-.32s@%-.64s' (Bruger password: %s)",
"Adgang nægtet bruger: '%-.32s@%-.64s' (Bruger adgangskode: %s)",
"Ingen database valgt",
"Ukendt kommando",
"Kolonne '%-.64s' kan ikke være nul",
"Kolonne '%-.64s' kan ikke være NULL",
"Ukendt database '%-.64s'",
"Tabellen '%-.64s' eksisterer allerede",
"Tabellen '%-.64s' findes allerede",
"Ukendt tabel '%-.64s'",
"Felt: '%-.64s' i tabel %s er ikke entydigt",
"Database nedkobling er i gang",
"Database nedlukning er i gang",
"Ukendt kolonne '%-.64s' i tabel %s",
"Grugte '%-.64s' som ikke var i group by",
"Brugte '%-.64s' som ikke var i group by",
"Kan ikke gruppere på '%-.64s'",
"Udtrykket har summer (sum) funktioner og kolonner i samme udtryk",
"Kolonne tæller stemmer ikke med værditæller",
"Identifikationen '%-.64s' er for lang",
"Feltnavnet '%-.64s' eksisterer allerede",
"Indeksnavnet '%-.64s' eksisterer allerede",
"Kolonne tæller stemmer ikke med antallet af værdier",
"Navnet '%-.64s' er for langt",
"Feltnavnet '%-.64s' findes allerede",
"Indeksnavnet '%-.64s' findes allerede",
"Ens værdier '%-.64s' for indeks %d",
"Forkert kolonnespecifikaton for felt '%-.64s'",
"%s nær '%-.64s' på linje %d",
"Forespørgsel var tom",
"Ikke unikt tabel/alias: '%-.64s'",
"Tabellen/aliaset: '%-.64s' er ikke unikt",
"Ugyldig standardværdi for '%-.64s'",
"Flere primærindekser specificeret",
"For mange indekser specificeret. Maks %d indekser tillatt",
"For mange indeksdele specificeret. Maks %d dele tillatt",
"Specificeret indeks var for langt. Maks indekslængde er %d",
"Indeks felt '%-.64s' eksiterer ikke i tabellen",
"Blob felt '%-.64s' kan ikke bruges ved specifikation af indeks",
"Flere primærnøgler specificeret",
"For mange nøgler specificeret. Kun %d nøgler må bruges",
"For mange nøgledele specificeret. Kun %d dele må bruges",
"Specificeret nøgle var for lang. Maksimal nøglelængde er %d",
"Nøglefeltet '%-.64s' eksisterer ikke i tabellen",
"BLOB feltet '%-.64s' kan ikke bruges ved specifikation af indeks",
"For stor feltlængde for kolonne '%-.64s' (maks = %d). Brug BLOB i stedet",
"Der kan kun bruges eet AUTO-felt og det skal være indekseret",
"%s: klar for tilslutninger\n",
"Der kan kun specificeres eet AUTO_INCREMENT-felt, og det skal være indekseret",
"%s: klar til tilslutninger\n",
"%s: Normal nedlukning\n",
"%s: Opdaget signal %d. Afslutter!!\n",
"%s: Fangede signal %d. Afslutter!!\n",
"%s: Server lukket\n",
"%s: Forceret nedlukning af tråd: %ld bruger: '%-.64s'\n",
"Kan ikke oprette IP socket",
"Tabellen '%-.64s' har intet indeks som det der er brugt i CREATE INDEX. Genopret tabellen",
"Tabellen '%-.64s' har ikke den nøgle, som blev brugt i CREATE INDEX. Genopret tabellen",
"Felt adskiller er ikke som forventet, se dokumentationen",
"Man kan ikke bruge faste feltlængder med BLOB. Brug i stedet 'fields terminated by'.",
"Filen '%-.64s' skal være i database-biblioteket for at kunne læses af alle",
"Filen '%-.64s' skal være i database-folderen og kunne læses af alle",
"Filen '%-.64s' eksisterer allerede",
"Poster: %ld Fjernet: %ld Sprunget over: %ld Advarsler: %ld",
"Poster: %ld Ens: %ld",
"Forkert indeksdel. Den anvendte indeksdel er ikke en streng eller den længden er større end indekslængden",
"Forkert indeksdel. Den anvendte nøgledel er ikke en streng eller længden er større end nøglelængden",
"Man kan ikke slette alle felter med ALTER TABLE. Brug DROP TABLE i stedet.",
"Kan ikke DROP '%-.64s'. Undersøg om felt/indeks eksisterer.",
"Kan ikke udføre DROP '%-.64s'. Undersøg om feltet/nøglen eksisterer.",
"Poster: %ld Ens: %ld Advarsler: %ld",
"INSERT TABLE '%-.64s' er ikke tilladt i FROM tabel liste",
"Ukendt tråd id: %lu",
"Du er ikke ejer av tråden %lu",
"Du er ikke ejer af tråden %lu",
"Ingen tabeller i brug",
"For mange tekststrenge kolonne %s og SET",
"Kan ikke lave unikt loggfilnavn %s.(1-999)\n",
"For mange tekststrenge til specifikationen af SET i kolonne %-.64s",
"Kan ikke lave unikt log-filnavn %s.(1-999)\n",
"Tabellen '%-.64s' var låst med READ lås og kan ikke opdateres",
"Tabellen '%-.64s' var ikke låst med LOCK TABLES",
"Blob feltet '%-.64s' kan ikke have en standard værdi",
"BLOB feltet '%-.64s' kan ikke have en standard værdi",
"Ugyldigt database navn '%-.64s'",
"Ugyldigt tabel navn '%-.64s'",
"SELECT ville undersøge for mange poster og ville sannsynligvis tage meget lang tid. Undersøg WHERE delen og brug SET OPTION SQL_BIG_SELECTS=1 hvis SELECTen er korrekt"
"SELECT ville undersøge for mange poster og ville sandsynligvis tage meget lang tid. Undersøg WHERE delen og brug SET OPTION SQL_BIG_SELECTS=1 hvis udtrykket er korrekt"
"Ukendt fejl",
"Ukendt procedure %s",
"Forkert antal parametre til proceduren %s",
"Forkert(e) parametre til proceduren %s",
"Ukendt tabel '%-.64s' i %s",
"Feltet '%-.64s' er anvendt to ganger",
"Forkert brug af gruppe-funktion",
"Tabellen '%-.64s' bruger et efternavn som ikke findes i denne MySQL version",
"Feltet '%-.64s' er anvendt to gange",
"Forkert brug af grupperings-funktion",
"Tabellen '%-.64s' bruger et filtypenavn som ikke findes i denne MySQL version",
"En tabel skal have mindst een kolonne",
"Tabellen '%-.64s' er fuld",
"Ukendt karaktersæt: '%-.64s'",
"Ukendt tegnsæt: '%-.64s'",
"For mange tabeller. MySQL kan kun bruge %d tabeller i et join",
"For mange felter",
"For store poster. Max post størrelse, unde BOLB's, er %d. Du må lave nogle felter til BLOB's",
"For store poster. Max post størrelse, uden BLOB's, er %d. Du må lave nogle felter til BLOB's",
"Thread stack brugt: Brugt: %ld af en %ld stak. Brug 'mysqld -O thread_stack=#' for at allokere en større stak om nødvendigt",
"Krydsreferencer fundet i OUTER JOIN. Check dine ON conditions",
"Kolonne '%-.32s' bruges som UNIQUE eller INDEX men er ikke defineret som NOT NULL",
"Kan ikke læse funktionen '%-.64s'",
"Kan ikke starte funktionen '%-.64s'; %-.80s",
"Ingen sti tilladte for delt bibliotek",
"Angivelse af sti ikke tilladt for delt bibliotek",
"Funktionen '%-.64s' findes allerede",
"Kan ikke åbne delt bibliotek '%-.64s' (errno: %d %s)",
"Kan ikke finde funktionen '%-.64s' in bibliotek'",
"Kan ikke finde funktionen '%-.64s' i bibliotek'",
"Funktionen '%-.64s' er ikke defineret",
"Værten er blokeret på grund af mange fejlforespørgsler. Lås op med 'mysqladmin flush-hosts'",
"Værten '%-.64s' kan ikke tilkoble denne MySQL-server",
......@@ -139,7 +139,7 @@
"Du skal have tilladelse til at opdatere tabeller i MySQL databasen for at ændre andres adgangskoder",
"Kan ikke finde nogen tilsvarende poster i bruger tabellen",
"Poster fundet: %ld Ændret: %ld Advarsler: %ld",
"Kan ikke danne en ny tråd (thread) (errno %d). Hvis computeren ikke er løbet tør for hukommelse, kan du se i brugervejledningen for en mulig operativ-system - afhængig fejl",
"Kan ikke danne en ny tråd (fejl nr. %d). Hvis computeren ikke er løbet tør for hukommelse, kan du se i brugervejledningen for en mulig operativ-system - afhængig fejl",
"Kolonne antallet stemmer ikke overens med antallet af værdier i post %ld",
"Kan ikke genåbne tabel '%-.64s',
"Forkert brug af nulværdi (NULL)",
......@@ -171,47 +171,48 @@
"Denne tabeltype understøtter ikke brug af AUTO_INCREMENT kolonner",
"INSERT DELAYED kan ikke bruges med tabellen '%-.64s', fordi tabellen er låst med LOCK TABLES",
"Forkert kolonnenavn '%-.100s'",
"Den brugte tabel styrer kan ikke indeksere kolonnen '%-.64s'",
"Den brugte tabeltype kan ikke indeksere kolonnen '%-.64s'",
"Tabellerne i MERGE er ikke defineret ens",
"Kan ikke skrive til tabellen '%-.64s' fordi det vil bryde CONSTRAINT regler",
"BLOB column '%-.64s' used in key specification without a key length",
"All parts of a PRIMARY KEY must be NOT NULL; If you need NULL in a key, use UNIQUE instead",
"Result consisted of more than one row",
"This table type requires a primary key",
"This version of MySQL is not compiled with RAID support",
"You are using safe update mode and you tried to update a table without a WHERE that uses a KEY column",
"Key '%-.64s' doesn't exist in table '%-.64s'",
"Can't open table",
"The handler for the table doesn't support check/repair",
"You are not allowed to execute this command in a transaction",
"Got error %d during COMMIT",
"Got error %d during ROLLBACK",
"Got error %d during FLUSH_LOGS",
"Got error %d during CHECKPOINT",
"Aborted connection %ld to db: '%-.64s' user: '%-.32s' host: `%-.64s' (%-.64s)",
"The handler for the table does not support binary table dump",
"Binlog closed while trying to FLUSH MASTER",
"Failed rebuilding the index of dumped table '%-.64s'",
"Error from master: '%-.64s'",
"Net error reading from master",
"Net error writing to master",
"Can't find FULLTEXT index matching the column list",
"Can't execute the given command because you have active locked tables or an active transaction",
"Unknown system variable '%-.64'",
"Table '%-.64s' is marked as crashed and should be repaired",
"Table '%-.64s' is marked as crashed and last (automatic?) repair failed",
"Warning: Some non-transactional changed tables couldn't be rolled back",
"Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage. Increase this mysqld variable and try again',
"This operation cannot be performed with a running slave, run SLAVE STOP first",
"This operation requires a running slave, configure slave and do SLAVE START",
"The server is not configured as slave, fix in config file or with CHANGE MASTER TO",
"Could not initialize master info structure, check permisions on master.info",
"Could not create slave thread, check system resources",
"User %-.64s has already more than 'max_user_connections' active connections",
"You may only use constant expressions with SET",
"Lock wait timeout exceeded",
"The total number of locks exceeds the lock table size",
"Update locks cannot be acquired during a READ UNCOMMITTED transaction",
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"BLOB kolonnen '%-.64s' brugt i nøglespecifikation uden nøglelængde",
"Alle dele af en PRIMARY KEY skal være NOT NULL; Hvis du skal bruge NULL i nøglen, brug UNIQUE istedet",
"Resultatet bestod af mere end een række",
"Denne tabeltype kræver en primærnøgle",
"Denne udgave af MySQL er ikke oversat med understøttelse af RAID",
"Du bruger sikker opdaterings modus ('safe update mode') og du forsøgte at opdatere en tabel uden en WHERE klausul, der gør brug af et KEY felt",
"Nøglen '%-.64s' eksisterer ikke i tabellen '%-.64s'",
"Kan ikke åbne tabellen",
"Denne tabeltype understøtter ikke CHECK/REPAIR",
"Du må ikke bruge denne kommando i en transaktion",
"Modtog fejl %d mens kommandoen COMMIT blev udført",
"Modtog fejl %d mens kommandoen ROLLBACK blev udført",
"Modtog fejl %d mens kommandoen FLUSH_LOGS blev udført",
"Modtog fejl %d mens kommandoen CHECKPOINT blev udført",
"Afbrød forbindelsen %ld til databasen '%-.64s' bruger: '%-.32s' vært: `%-.64s' (%-.64s)",
"Denne tabeltype unserstøtter ikke binært tabeldump",
"Binlog blev lukket mens kommandoen FLUSH MASTER blev udført",
"Kunne ikke genopbygge indekset for den dumpede tabel '%-.64s'",
"Fejl fra master: '%-.64s'",
"Netværksfejl ved læsning fra master",
"Netværksfejl ved skrivning til master",
"Kan ikke finde en FULLTEXT nøgle som svarer til kolonne listen",
"Kan ikke udføre den givne kommando fordi der findes aktive, låste tabeller eller fordi der udføres en transaktion",
"Ukendt systemvariabel '%-.64'",
"Tabellen '%-.64s' er markeret med fejl og bør repareres",
"Tabellen '%-.64s' er markeret med fejl og sidste (automatiske?) REPAIR fejlede",
"Advarsel: Visse data i tabeller der ikke understøtter transaktioner kunne ikke tilbagestilles",
"Fler-udtryks transaktion krævede mere plads en 'max_binlog_cache_size' bytes. Forhøj værdien af denne variabel og prøv igen',
"Denne handling kunne ikke udføres med kørende slave, brug først kommandoen SLAVE STOP",
"Denne handling kræver en kørende slave. Konfigurer en slave og brug kommandoen SLAVE START",
"Denne server er ikke konfigureret som slave. Ret in config-filen eller brug kommandoen CHANGE MASTER TO",
"Kunne ikke initialisere master info-struktur. Check om rettigheder i master.info",
"Kunne ikke danne en slave-tråd. Check systemressourcerne",
"Brugeren %-.64s har allerede mere end 'max_user_connections' aktive forbindelser",
"Du må kun bruge konstantudtryk med SET",
"Lock wait timeout overskredet",
"Det totale antal låse overstiger størrelsen på låse-tabellen",
"Update lås kan ikke opnås under en READ UNCOMMITTED transaktion",
"DROP DATABASE er ikke tilladt mens en tråd holder på globalt read lock",
"CREATE DATABASE er ikke tilladt mens en tråd holder på globalt read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/dutch/errmsg.txt
View file @ e7575da7
......@@ -212,3 +212,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/english/errmsg.txt
View file @ e7575da7
......@@ -212,3 +212,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/estonian/errmsg.txt
View file @ e7575da7
......@@ -216,3 +216,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/french/errmsg.txt
View file @ e7575da7
......@@ -212,3 +212,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/german/errmsg.txt
View file @ e7575da7
......@@ -215,3 +215,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/greek/errmsg.txt
View file @ e7575da7
......@@ -212,3 +212,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/hungarian/errmsg.txt
View file @ e7575da7
......@@ -214,3 +214,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/italian/errmsg.txt
View file @ e7575da7
......@@ -212,3 +212,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/japanese/errmsg.txt
View file @ e7575da7
......@@ -214,3 +214,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/korean/errmsg.txt
View file @ e7575da7
......@@ -212,3 +212,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/norwegian-ny/errmsg.txt
View file @ e7575da7
......@@ -214,3 +214,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/norwegian/errmsg.txt
View file @ e7575da7
......@@ -214,3 +214,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/polish/errmsg.txt
View file @ e7575da7
......@@ -216,3 +216,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/portuguese/errmsg.txt
View file @ e7575da7
......@@ -212,3 +212,4 @@
"DROP DATABASE não permitido enquanto uma 'thread' está assegurando um travamento global de leitura",
"CREATE DATABASE não permitido enquanto uma 'thread' está assegurando um travamento global de leitura",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/romanian/errmsg.txt
View file @ e7575da7
......@@ -216,3 +216,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/russian/errmsg.txt
View file @ e7575da7
......@@ -215,3 +215,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/slovak/errmsg.txt
View file @ e7575da7
......@@ -220,3 +220,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/spanish/errmsg.txt
View file @ e7575da7
......@@ -213,3 +213,4 @@
"DROP DATABASE no permitido mientras un thread está ejerciendo un bloqueo de lectura global",
"CREATE DATABASE no permitido mientras un thread está ejerciendo un bloqueo de lectura global",
"Wrong arguments to %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/share/swedish/errmsg.txt
View file @ e7575da7
......@@ -212,3 +212,4 @@
"DROP DATABASE not allowed while thread is holding global read lock",
"CREATE DATABASE not allowed while thread is holding global read lock",
"Felaktiga argument till %s",
"%-.32s@%-.64s is not allowed to create new users",
sql/sql_acl.cc
View file @ e7575da7
......@@ -943,16 +943,41 @@ end:
DBUG_RETURN(error);
}
/* Return 1 if we are allowed to create new users */
static bool test_if_create_new_users(THD *thd)
{
bool create_new_users=1; // Assume that we are allowed to create new users
if (opt_safe_user_create && !(thd->master_access & INSERT_ACL))
{
TABLE_LIST tl;
uint db_access;
bzero((char*) &tl,sizeof(tl));
tl.db= (char*) "mysql";
tl.real_name= (char*) "user";
db_access=acl_get(thd->host, thd->ip, (char*) &thd->remote.sin_addr,
thd->priv_user, tl.db);
if (!(db_access & INSERT_ACL))
{
if (check_grant(thd,INSERT_ACL,&tl,0,1))
create_new_users=0;
}
}
return create_new_users;
}
/****************************************************************************
** Handle GRANT commands
****************************************************************************/
static int replace_user_table(TABLE *table, const LEX_USER &combo,
uint rights, char what)
uint rights, char what, bool create_user)
{
int error = -1;
uint i,j;
bool ima=0;
bool old_row_exists=0;
char *password,empty_string[1];
DBUG_ENTER("replace_user_table");
......@@ -971,14 +996,21 @@ static int replace_user_table(TABLE *table, const LEX_USER &combo,
(byte*) table->field[0]->ptr,0,
HA_READ_KEY_EXACT))
{
if (what == 'N')
if (!create_user)
{
my_printf_error(ER_NONEXISTING_GRANT,ER(ER_NONEXISTING_GRANT),
MYF(0),combo.user.str,combo.host.str);
THD *thd=current_thd;
if (what == 'N')
my_printf_error(ER_NONEXISTING_GRANT,ER(ER_NONEXISTING_GRANT),
MYF(0),combo.user.str,combo.host.str);
else
my_printf_error(ER_NO_PERMISSON_TO_CREATE_USER,
ER(ER_NO_PERMISSON_TO_CREATE_USER),
MYF(0),thd->user,
thd->host ? thd->host : thd->ip ? thd->ip: "");
error= -1;
goto end;
}
ima = 0; // no row; ima on Serbian means 'there is something'
old_row_exists = 0;
restore_record(table,2); // cp empty row from record[2]
table->field[0]->store(combo.host.str,combo.host.length);
table->field[1]->store(combo.user.str,combo.user.length);
......@@ -986,7 +1018,7 @@ static int replace_user_table(TABLE *table, const LEX_USER &combo,
}
else
{
ima = 1;
old_row_exists = 1;
store_record(table,1); // Save copy for update
if (combo.password.str) // If password given
table->field[2]->store(password,(uint) strlen(password));
......@@ -1001,7 +1033,7 @@ static int replace_user_table(TABLE *table, const LEX_USER &combo,
}
rights=get_access(table,3);
if (ima) // there is a row, therefore go to update, instead of insert
if (old_row_exists)
{
/*
We should NEVER delete from the user table, as a uses can still
......@@ -1033,7 +1065,7 @@ static int replace_user_table(TABLE *table, const LEX_USER &combo,
acl_cache->clear(1); // Clear privilege cache
if (!combo.password.str)
password=0; // No password given on command
if (ima)
if (old_row_exists)
acl_update_user(combo.user.str,combo.host.str,password,rights);
else
acl_insert_user(combo.user.str,combo.host.str,password,rights);
......@@ -1052,7 +1084,7 @@ static int replace_db_table(TABLE *table, const char *db,
uint rights, char what)
{
uint i,j,store_rights;
bool ima=0;
bool old_row_exists=0;
int error;
DBUG_ENTER("replace_db_table");
......@@ -1076,7 +1108,7 @@ static int replace_db_table(TABLE *table, const char *db,
combo.user.str,combo.host.str);
goto abort;
}
ima = 0; // no row
old_row_exists = 0;
restore_record(table,2); // cp empty row from record[2]
table->field[0]->store(combo.host.str,combo.host.length);
table->field[1]->store(db,(uint) strlen(db));
......@@ -1084,7 +1116,7 @@ static int replace_db_table(TABLE *table, const char *db,
}
else
{
ima = 1;
old_row_exists = 1;
store_record(table,1);
}
......@@ -1097,8 +1129,9 @@ static int replace_db_table(TABLE *table, const char *db,
rights=get_access(table,3);
rights=fix_rights_for_db(rights);
if (ima) // there is a row, therefore go update, else insert
if (old_row_exists)
{
// update old existing row
if (rights)
{
if ((error=table->file->update_row(table->record[1],table->record[0])))
......@@ -1117,7 +1150,7 @@ static int replace_db_table(TABLE *table, const char *db,
}
acl_cache->clear(1); // Clear privilege cache
if (ima)
if (old_row_exists)
acl_update_db(combo.user.str,combo.host.str,db,rights);
else
acl_insert_db(combo.user.str,combo.host.str,db,rights);
......@@ -1324,7 +1357,7 @@ static int replace_column_table(GRANT_TABLE *g_t,
while ((xx=iter++))
{
uint privileges = xx->rights;
bool ima=0;
bool old_row_exists=0;
key_restore(table,key,0,key_length);
table->field[4]->store(xx->column.ptr(),xx->column.length());
......@@ -1339,7 +1372,7 @@ static int replace_column_table(GRANT_TABLE *g_t,
result= -1; /* purecov: inspected */
continue; /* purecov: inspected */
}
ima = 0;
old_row_exists = 0;
restore_record(table,2); // Get empty record
key_restore(table,key,0,key_length);
table->field[4]->store(xx->column.ptr(),xx->column.length());
......@@ -1353,13 +1386,13 @@ static int replace_column_table(GRANT_TABLE *g_t,
privileges = tmp & ~(privileges | rights);
else
privileges |= tmp;
ima = 1;
old_row_exists = 1;
store_record(table,1); // copy original row
}
table->field[6]->store((longlong) get_rights_for_column(privileges));
if (ima) // there is a row, therefore go update, else insert
if (old_row_exists)
{
if (privileges)
error=table->file->update_row(table->record[1],table->record[0]);
......@@ -1465,7 +1498,7 @@ static int replace_table_table(THD *thd, GRANT_TABLE *grant_table,
uint rights, uint kolone, bool revoke_grant)
{
char grantor[HOSTNAME_LENGTH+1+USERNAME_LENGTH];
int ima = 1;
int old_row_exists = 1;
int error=0;
uint store_table_rights,store_col_rights;
DBUG_ENTER("replace_table_table");
......@@ -1505,13 +1538,13 @@ static int replace_table_table(THD *thd, GRANT_TABLE *grant_table,
table_name); /* purecov: deadcode */
DBUG_RETURN(-1); /* purecov: deadcode */
}
ima = 0; // no row
old_row_exists = 0;
restore_record(table,1); // Get saved record
}
store_table_rights=get_rights_for_table(rights);
store_col_rights=get_rights_for_column(kolone);
if (ima)
if (old_row_exists)
{
uint j,k;
store_record(table,1);
......@@ -1536,7 +1569,7 @@ static int replace_table_table(THD *thd, GRANT_TABLE *grant_table,
rights=fix_rights_for_table(store_table_rights);
kolone=fix_rights_for_column(store_col_rights);
if (ima) // there is a row, therefore go update, else insert
if (old_row_exists)
{
if (store_table_rights || store_col_rights)
{
......@@ -1668,10 +1701,12 @@ int mysql_table_grant (THD *thd, TABLE_LIST *table_list,
continue;
}
/* Create user if needed */
if ((replace_user_table(tables[0].table,
if (replace_user_table(tables[0].table,
*Str,
0,
revoke_grant ? 'N' : 'Y')))
revoke_grant ? 'N' : 'Y',
(revoke_grant ? 0 :
test_if_create_new_users(thd))))
{
result= -1; // Remember error
continue; // Add next user
......@@ -1773,6 +1808,7 @@ int mysql_grant (THD *thd, const char *db, List <LEX_USER> &list, uint rights,
List_iterator <LEX_USER> str_list (list);
LEX_USER *Str;
char what;
bool create_new_users=0;
TABLE_LIST tables[2];
DBUG_ENTER("mysql_grant");
......@@ -1799,8 +1835,10 @@ int mysql_grant (THD *thd, const char *db, List <LEX_USER> &list, uint rights,
DBUG_RETURN(-1); /* purecov: deadcode */
}
// go through users in user_list
if (!revoke_grant)
create_new_users= test_if_create_new_users(thd);
// go through users in user_list
pthread_mutex_lock(&LOCK_grant);
VOID(pthread_mutex_lock(&acl_cache->lock));
grant_version++;
......@@ -1822,11 +1860,14 @@ int mysql_grant (THD *thd, const char *db, List <LEX_USER> &list, uint rights,
}
if ((replace_user_table(tables[0].table,
*Str,
(!db ? rights : 0), what)))
result= -1;
if (db && replace_db_table(tables[1].table, db, *Str, rights & DB_ACLS,
what))
(!db ? rights : 0), what, create_new_users)))
result= -1;
else
{
if (db && replace_db_table(tables[1].table, db, *Str, rights & DB_ACLS,
what))
result= -1;
}
}
VOID(pthread_mutex_unlock(&acl_cache->lock));
pthread_mutex_unlock(&LOCK_grant);
......@@ -1978,7 +2019,7 @@ void grant_reload(void)
****************************************************************************/
bool check_grant(THD *thd, uint want_access, TABLE_LIST *tables,
uint show_table)
uint show_table, bool no_errors)
{
TABLE_LIST *table;
char *user = thd->priv_user;
......@@ -2026,7 +2067,7 @@ bool check_grant(THD *thd, uint want_access, TABLE_LIST *tables,
err:
pthread_mutex_unlock(&LOCK_grant);
if (show_table != 1) // Not a silent skip of table
if (!no_errors) // Not a silent skip of table
{
const char *command="";
if (want_access & SELECT_ACL)
......
sql/sql_acl.h
View file @ e7575da7
......@@ -74,7 +74,7 @@ int grant_init(void);
void grant_free(void);
void grant_reload(void);
bool check_grant(THD *thd, uint want_access, TABLE_LIST *tables,
uint show_command=0);
uint show_command=0, bool dont_print_error=0);
bool check_grant_column (THD *thd,TABLE *table, const char *name,uint length,
uint show_command=0);
bool check_grant_all_columns(THD *thd, uint want_access, TABLE *table);
......
sql/sql_base.cc
View file @ e7575da7
......@@ -133,7 +133,7 @@ int list_open_tables(THD *thd,List<char> *tables, const char *db,
table_list.db= (char*) db;
table_list.real_name= entry->real_name;/*real name*/
table_list.grant.privilege=col_access;
if (check_grant(thd,TABLE_ACLS,&table_list,1))
if (check_grant(thd,TABLE_ACLS,&table_list,1,1))
continue;
}
/* need to check if he have't already listed it */
......
sql/sql_parse.cc
View file @ e7575da7
......@@ -36,7 +36,6 @@ extern "C" int gethostname(char *name, int namelen);
static int check_for_max_user_connections(const char *user, int u_length,
const char *host);
static void decrease_user_connections(const char *user, const char *host);
static bool check_table_access(THD *thd,uint want_access, TABLE_LIST *tables);
static bool check_db_used(THD *thd,TABLE_LIST *tables);
static bool check_merge_table_access(THD *thd, char *db, TABLE_LIST *tables);
static bool check_dup(THD *thd,const char *db,const char *name,
......@@ -1956,7 +1955,7 @@ mysql_execute_command(void)
else
res = mysql_grant(thd, lex->db, lex->users_list, lex->grant,
lex->sql_command == SQLCOM_REVOKE);
if(!res)
if (!res)
{
mysql_update_log.write(thd, thd->query,thd->query_length);
if (mysql_bin_log.is_open())
......@@ -2116,7 +2115,7 @@ bool check_process_priv(THD *thd)
** in the table list for GRANT checking
*/
static bool
bool
check_table_access(THD *thd,uint want_access,TABLE_LIST *tables)
{
uint found=0,found_access=0;
......
sql/sql_show.cc
View file @ e7575da7
......@@ -220,7 +220,7 @@ mysql_find_files(THD *thd,List<char> *files, const char *db,const char *path,
table_list.db= (char*) db;
table_list.real_name=file->name;
table_list.grant.privilege=col_access;
if (check_grant(thd,TABLE_ACLS,&table_list,1))
if (check_grant(thd,TABLE_ACLS,&table_list,1,1))
continue;
}
if (files->push_back(thd->strdup(file->name)))
......
sql/sql_table.cc
View file @ e7575da7
......@@ -59,9 +59,9 @@ int mysql_rm_table(THD *thd,TABLE_LIST *tables, my_bool if_exists)
VOID(pthread_mutex_lock(&LOCK_open));
pthread_mutex_unlock(&thd->mysys_var->mutex);
if(global_read_lock)
if (global_read_lock)
{
if(thd->global_read_lock)
if (thd->global_read_lock)
{
my_error(ER_TABLE_NOT_LOCKED_FOR_WRITE,MYF(0),
tables->real_name);
......@@ -1126,7 +1126,12 @@ int mysql_alter_table(THD *thd,char *new_db, char *new_name,
strmov(new_name_buff,new_name);
fn_same(new_name_buff,table_name,3);
#ifdef FN_LOWER_CASE
if (!my_strcasecmp(new_name_buff,table_name))// Check if name changed
if (lower_case_table_names)
casedn_str(new_name);
if ((lower_case_table_names &&
!my_strcasecmp(new_name_buff,table_name)) ||
(!lower_case_table_names &&
!strcmp(new_name_buff,table_name)))
#else
if (!strcmp(new_name_buff,table_name)) // Check if name changed
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7