Merge bk-internal.mysql.com:/data0/bk/mysql-5.1

into  bk-internal.mysql.com:/data0/bk/mysql-5.1-kt

BUILD/Makefile.am

@@ -38,7 +38,6 @@ EXTRA_DIST =		FINISH.sh \
 			compile-pentium-debug-max \
 			compile-pentium-debug-max-no-embedded \
 			compile-pentium-debug-max-no-ndb \
-			compile-pentium-debug-no-bdb \
 			compile-pentium-debug-openssl \
 			compile-pentium-debug-yassl \
 			compile-pentium-gcov \

BUILD/compile-dist

@@ -52,7 +52,6 @@ fi
   --with-csv-storage-engine \
   --with-example-storage-engine \
   --with-federated-storage-engine \
-  --with-berkeley-db \
   --with-innodb \
   --with-ssl \
   --enable-thread-safe-client \

BUILD/compile-pentium-debug-no-bdb

-#! /bin/sh
-
-path=`dirname $0`
-. "$path/SETUP.sh"
-
-extra_flags="$pentium_cflags $debug_cflags"
-extra_configs="$pentium_configs $debug_configs --without-berkeley-db $static_link"
-
-. "$path/FINISH.sh"

BUILD/compile-solaris-sparc-purify

@@ -37,7 +37,7 @@ gmake -k clean || true
 path=`dirname $0`
 . "$path/autorun.sh"
 
-CFLAGS="-g -Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wimplicit-int -Wparentheses -Wsign-compare -Wwrite-strings -Wunused  -DHAVE_purify -DEXTRA_DEBUG -O2" CXX=gcc CXXLD=g++ CXXFLAGS="-g -Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wparentheses -Wsign-compare -Wwrite-strings -Woverloaded-virtual -Wsign-promo -Wreorder -Wctor-dtor-privacy -Wnon-virtual-dtor -felide-constructors -fno-exceptions -fno-rtti  -DHAVE_purify -DEXTRA_DEBUG -O2" ./configure --prefix=/usr/local/mysql --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-berkeley-db --with-embedded-server --with-innodb $EXTRA_CONFIG_FLAGS
+CFLAGS="-g -Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wimplicit-int -Wparentheses -Wsign-compare -Wwrite-strings -Wunused  -DHAVE_purify -DEXTRA_DEBUG -O2" CXX=gcc CXXLD=g++ CXXFLAGS="-g -Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wparentheses -Wsign-compare -Wwrite-strings -Woverloaded-virtual -Wsign-promo -Wreorder -Wctor-dtor-privacy -Wnon-virtual-dtor -felide-constructors -fno-exceptions -fno-rtti  -DHAVE_purify -DEXTRA_DEBUG -O2" ./configure --prefix=/usr/local/mysql --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-embedded-server --with-innodb $EXTRA_CONFIG_FLAGS
 
 gmake -j 4
 

CMakeLists.txt

@@ -131,9 +131,6 @@ ADD_SUBDIRECTORY(client)
 IF(WITH_ARCHIVE_STORAGE_ENGINE)
   ADD_SUBDIRECTORY(storage/archive)
 ENDIF(WITH_ARCHIVE_STORAGE_ENGINE)
-IF(WITH_BERKELEY_STORAGE_ENGINE)
-  ADD_SUBDIRECTORY(storage/bdb)
-ENDIF(WITH_BERKELEY_STORAGE_ENGINE)
 IF(WITH_BLACKHOLE_STORAGE_ENGINE)
   ADD_SUBDIRECTORY(storage/blackhole)
 ENDIF(WITH_BLACKHOLE_STORAGE_ENGINE)

configure.in

@@ -32,7 +32,6 @@ sinclude(config/ac-macros/check_cpu.m4)
 sinclude(config/ac-macros/character_sets.m4)
 sinclude(config/ac-macros/compiler_flag.m4)
 sinclude(config/ac-macros/plugins.m4)
-sinclude(config/ac-macros/ha_berkeley.m4)
 sinclude(config/ac-macros/ha_ndbcluster.m4)
 sinclude(config/ac-macros/large_file.m4)
 sinclude(config/ac-macros/misc.m4)
@@ -2142,12 +2141,6 @@ MYSQL_CHECK_SSL
 # functions tested above
 #--------------------------------------------------------------------
 
-MYSQL_STORAGE_ENGINE(berkeley,  berkeley-db, [BerkeleyDB Storage Engine],
-        [Transactional Tables using BerkeleyDB], [max,max-no-ndb])
-MYSQL_PLUGIN_DIRECTORY(berkeley,[storage/bdb])
-MYSQL_PLUGIN_STATIC(berkeley,   [[\$(bdb_libs_with_path)]])
-MYSQL_PLUGIN_ACTIONS(berkeley,  [MYSQL_SETUP_BERKELEY_DB])
-
 MYSQL_STORAGE_ENGINE(blackhole,,[Blackhole Storage Engine],
         [Basic Write-only Read-never tables], [max,max-no-ndb])
 MYSQL_PLUGIN_DIRECTORY(blackhole, [storage/blackhole])

libmysqld/CMakeLists.txt

@@ -16,7 +16,6 @@ INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/include
                     ${CMAKE_SOURCE_DIR}/sql
                     ${CMAKE_SOURCE_DIR}/regex
                     ${CMAKE_SOURCE_DIR}/extra/yassl/include 
-		    ${CMAKE_SOURCE_DIR}/storage/bdb/build_win32
                     ${CMAKE_SOURCE_DIR}/zlib 
 )
 
@@ -84,9 +83,6 @@ ENDIF(WITH_EXAMPLE_STORAGE_ENGINE)
 IF(WITH_INNOBASE_STORAGE_ENGINE)
   ADD_DEPENDENCIES(mysqlserver innobase)
 ENDIF(WITH_INNOBASE_STORAGE_ENGINE)
-IF(WITH_BERKELEY_STORAGE_ENGINE)
-  ADD_DEPENDENCIES(mysqlserver bdb)
-ENDIF(WITH_BERKELEY_STORAGE_ENGINE)
 
 ADD_LIBRARY(libmysqld MODULE cmake_dummy.c libmysqld.def)
 TARGET_LINK_LIBRARIES(libmysqld wsock32)

libmysqld/Makefile.am

@@ -45,7 +45,7 @@ noinst_HEADERS =	embedded_priv.h emb_qcache.h
 
 sqlsources = derror.cc field.cc field_conv.cc strfunc.cc filesort.cc \
 	ha_heap.cc ha_myisam.cc ha_myisammrg.cc \
-	ha_innodb.cc ha_berkeley.cc ha_federated.cc ha_ndbcluster.cc \
+	ha_innodb.cc ha_federated.cc ha_ndbcluster.cc \
 	ha_ndbcluster_binlog.cc ha_partition.cc \
 	handler.cc sql_handler.cc \
 	hostname.cc init.cc password.c \
@@ -96,10 +96,6 @@ yassl_inc_libs=	$(top_srcdir)/extra/yassl/src/.libs/libyassl.a \
 endif
 
 # Storage engine specific compilation options
-
-ha_berkeley.o:  ha_berkeley.cc
-		$(CXXCOMPILE) @bdb_includes@ $(LM_CFLAGS) -c $<
-
 ha_ndbcluster.o:ha_ndbcluster.cc
 		$(CXXCOMPILE) @ndbcluster_includes@ $(LM_CFLAGS) -c $<
 

mysql-test/extra/binlog_tests/binlog.test

@@ -3,7 +3,6 @@
 #
 
 -- source include/not_embedded.inc
--- source include/have_bdb.inc
 -- source include/have_innodb.inc
 -- source include/have_debug.inc
 
@@ -12,7 +11,7 @@ drop table if exists t1, t2;
 --enable_warnings
 reset master;
 
-create table t1 (a int) engine=bdb;
+create table t1 (a int) engine=innodb;
 create table t2 (a int) engine=innodb;
 begin;
 insert t1 values (5);

mysql-test/include/have_bdb.inc

--- require r/have_bdb.require
-disable_query_log;
-show variables like "have_bdb";
-enable_query_log;

mysql-test/install_test_db.sh

@@ -80,7 +80,7 @@ basedir=.
 EXTRA_ARG="--language=../sql/share/english/ --character-sets-dir=../sql/share/charsets/"
 fi
 
-mysqld_boot=" $execdir/mysqld --no-defaults --bootstrap --skip-grant-tables --basedir=$basedir --datadir=$ldata --skip-innodb --skip-ndbcluster --skip-bdb --tmpdir=. $EXTRA_ARG"
+mysqld_boot=" $execdir/mysqld --no-defaults --bootstrap --skip-grant-tables --basedir=$basedir --datadir=$ldata --skip-innodb --skip-ndbcluster --tmpdir=. $EXTRA_ARG"
 echo "running $mysqld_boot"
 
 if $scriptdir/mysql_create_system_tables test $mdata $hostname | $mysqld_boot

mysql-test/mysql-test-run.pl

@@ -2122,7 +2122,6 @@ sub install_db ($$) {
   mtr_add_arg($args, "--datadir=%s", $data_dir);
   mtr_add_arg($args, "--skip-innodb");
   mtr_add_arg($args, "--skip-ndbcluster");
-  mtr_add_arg($args, "--skip-bdb");
   mtr_add_arg($args, "--tmpdir=.");
 
   if ( ! $opt_netware )
@@ -2215,7 +2214,6 @@ basedir             = $path_my_basedir
 server_id           = $server_id
 skip-stack-trace
 skip-innodb
-skip-bdb
 skip-ndbcluster
 EOF
 ;
@@ -2629,7 +2627,6 @@ sub mysqld_arguments ($$$$$) {
   if ( $opt_valgrind_mysqld )
   {
     mtr_add_arg($args, "%s--skip-safemalloc", $prefix);
-    mtr_add_arg($args, "%s--skip-bdb", $prefix);
   }
 
   my $pidfile;

mysql-test/mysql-test-run.sh

@@ -536,8 +536,8 @@ while test $# -gt 0; do
     --valgrind | --valgrind-all)
       find_valgrind;
       VALGRIND=$FIND_VALGRIND
-      EXTRA_MASTER_MYSQLD_OPT="$EXTRA_MASTER_MYSQLD_OPT --skip-safemalloc --skip-bdb"
-      EXTRA_SLAVE_MYSQLD_OPT="$EXTRA_SLAVE_MYSQLD_OPT --skip-safemalloc --skip-bdb"
+      EXTRA_MASTER_MYSQLD_OPT="$EXTRA_MASTER_MYSQLD_OPT --skip-safemalloc"
+      EXTRA_SLAVE_MYSQLD_OPT="$EXTRA_SLAVE_MYSQLD_OPT --skip-safemalloc"
       SLEEP_TIME_AFTER_RESTART=10
       SLEEP_TIME_FOR_DELETE=60
       USE_RUNNING_SERVER=0

mysql-test/r/backup.result

@@ -6,26 +6,26 @@ Table	Op	Msg_type	Msg_text
 test.t4	backup	error	Failed copying .frm file (errno: X)
 test.t4	backup	status	Operation failed
 Warnings:
-Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead.
+Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead
 Error	1	Can't create/write to file 'MYSQLTEST_VARDIR/bogus/t4.frm' (Errcode: X)
 backup table t4 to '../tmp';
 Table	Op	Msg_type	Msg_text
 test.t4	backup	status	OK
 Warnings:
-Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead.
+Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead
 backup table t4 to '../tmp';
 Table	Op	Msg_type	Msg_text
 test.t4	backup	error	Failed copying .frm file (errno: X)
 test.t4	backup	status	Operation failed
 Warnings:
-Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead.
+Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead
 Error	1	Can't create/write to file 'MYSQLTEST_VARDIR/tmp/t4.frm' (Errcode: X)
 drop table t4;
 restore table t4 from '../tmp';
 Table	Op	Msg_type	Msg_text
 test.t4	restore	status	OK
 Warnings:
-Warning	1541	The syntax 'RESTORE TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead.
+Warning	1541	The syntax 'RESTORE TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead
 select count(*) from t4;
 count(*)
 0
@@ -35,19 +35,19 @@ backup table t1 to '../tmp';
 Table	Op	Msg_type	Msg_text
 test.t1	backup	status	OK
 Warnings:
-Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead.
+Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead
 drop table t1;
 restore table t1 from '../bogus';
 Table	Op	Msg_type	Msg_text
 t1	restore	error	Failed copying .frm file
 Warnings:
-Warning	1541	The syntax 'RESTORE TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead.
+Warning	1541	The syntax 'RESTORE TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead
 Error	29	File 'MYSQLTEST_VARDIR/bogus/t1.frm' not found (Errcode: X)
 restore table t1 from '../tmp';
 Table	Op	Msg_type	Msg_text
 test.t1	restore	status	OK
 Warnings:
-Warning	1541	The syntax 'RESTORE TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead.
+Warning	1541	The syntax 'RESTORE TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead
 select n from t1;
 n
 23
@@ -62,7 +62,7 @@ Table	Op	Msg_type	Msg_text
 test.t2	backup	status	OK
 test.t3	backup	status	OK
 Warnings:
-Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead.
+Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead
 drop table t1,t2,t3;
 restore table t1,t2,t3 from '../tmp';
 Table	Op	Msg_type	Msg_text
@@ -70,7 +70,7 @@ test.t1	restore	status	OK
 test.t2	restore	status	OK
 test.t3	restore	status	OK
 Warnings:
-Warning	1541	The syntax 'RESTORE TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead.
+Warning	1541	The syntax 'RESTORE TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead
 select n from t1;
 n
 23
@@ -91,7 +91,7 @@ restore table t1 from '../tmp';
 Table	Op	Msg_type	Msg_text
 test.t1	restore	status	OK
 Warnings:
-Warning	1541	The syntax 'RESTORE TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead.
+Warning	1541	The syntax 'RESTORE TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead
 rename table t1 to t5;
 lock tables t5 write;
 backup table t5 to '../tmp';
@@ -99,7 +99,7 @@ unlock tables;
 Table	Op	Msg_type	Msg_text
 test.t5	backup	status	OK
 Warnings:
-Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead.
+Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead
 drop table t5;
 DROP TABLE IF EXISTS `t+1`;
 CREATE  TABLE `t+1` (c1 INT);
@@ -108,13 +108,13 @@ BACKUP  TABLE `t+1` TO '../tmp';
 Table	Op	Msg_type	Msg_text
 test.t+1	backup	status	OK
 Warnings:
-Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead.
+Warning	1541	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead
 DROP    TABLE `t+1`;
 RESTORE TABLE `t+1` FROM '../tmp';
 Table	Op	Msg_type	Msg_text
 test.t+1	restore	status	OK
 Warnings:
-Warning	1541	The syntax 'RESTORE TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead.
+Warning	1541	The syntax 'RESTORE TABLE' is deprecated and will be removed in MySQL 5.2. Please use MySQL Administrator (mysqldump, mysql) instead
 SELECT * FROM `t+1`;
 c1
 1

mysql-test/r/bdb-alter-table-1.result

-drop table if exists t1;
-create table t1(objid BIGINT not null, tablename  varchar(64), oid BIGINT not null, test BIGINT,  PRIMARY KEY (objid), UNIQUE(tablename))  engine=BDB;
-insert into t1 values(1, 't1',4,9);
-insert into t1 values(2, 'metatable',1,9);
-insert into t1 values(3, 'metaindex',1,9 );
-select * from t1;
-objid	tablename	oid	test
-1	t1	4	9
-2	metatable	1	9
-3	metaindex	1	9
-alter table t1 drop column test;

mysql-test/r/bdb-alter-table-2.result

-select * from t1;
-objid	tablename	oid
-1	t1	4
-2	metatable	1
-3	metaindex	1
-drop table t1;

mysql-test/r/bdb-crash.result

-drop table if exists t1;
-CREATE TABLE t1 (
-ChargeID int(10) unsigned NOT NULL auto_increment,
-ServiceID int(10) unsigned DEFAULT '0' NOT NULL,
-ChargeDate date DEFAULT '0000-00-00' NOT NULL,
-ChargeAmount decimal(20,2) DEFAULT '0.00' NOT NULL,
-FedTaxes decimal(20,2) DEFAULT '0.00' NOT NULL,
-ProvTaxes decimal(20,2) DEFAULT '0.00' NOT NULL,
-ChargeStatus enum('New','Auth','Unauth','Sale','Denied','Refund')
-DEFAULT 'New' NOT NULL,
-ChargeAuthorizationMessage text,
-ChargeComment text,
-ChargeTimeStamp varchar(20),
-PRIMARY KEY (ChargeID),
-KEY ServiceID (ServiceID),
-KEY ChargeDate (ChargeDate)
-) engine=BDB;
-BEGIN;
-INSERT INTO t1
-VALUES(NULL,1,'2001-03-01',1,1,1,'New',NULL,NULL,'now');
-COMMIT;
-BEGIN;
-UPDATE t1 SET ChargeAuthorizationMessage = 'blablabla' WHERE
-ChargeID = 1;
-COMMIT;
-INSERT INTO t1
-VALUES(NULL,1,'2001-03-01',1,1,1,'New',NULL,NULL,'now');
-select * from t1;
-ChargeID	ServiceID	ChargeDate	ChargeAmount	FedTaxes	ProvTaxes	ChargeStatus	ChargeAuthorizationMessage	ChargeComment	ChargeTimeStamp
-1	1	2001-03-01	1.00	1.00	1.00	New	blablabla	NULL	now
-2	1	2001-03-01	1.00	1.00	1.00	New	NULL	NULL	now
-drop table t1;
-create table t1 (a int) engine=bdb;
-set autocommit=0;
-insert into t1 values(1);
-analyze table t1;
-Table	Op	Msg_type	Msg_text
-test.t1	analyze	status	OK
-drop table t1;

mysql-test/r/bdb-deadlock.result

-drop table if exists t1,t2;
-create table t1 (id integer, x integer) engine=BDB;
-create table t2 (id integer, x integer) engine=BDB;
-insert into t1 values(0, 0);
-insert into t2 values(0, 0);
-set autocommit=0;
-update t1 set x = 1 where id = 0;
-set autocommit=0;
-update t2 set x = 1 where id = 0;
-select x from t1 where id = 0;
-select x from t2 where id = 0;
-ERROR 40001: Deadlock found when trying to get lock; try restarting transaction
-commit;
-x
-1
-commit;
-select * from t1;
-id	x
-0	1
-select * from t2;
-id	x
-0	1
-commit;
-select * from t1;
-id	x
-0	1
-select * from t2;
-id	x
-0	1
-commit;
-drop table t1,t2;

mysql-test/r/bdb_cache.result

-drop table if exists t1, t2, t3;
-flush status;
-set autocommit=0;
-create table t1 (a int not null) engine=bdb;
-insert into t1 values (1),(2),(3);
-select * from t1;
-a
-1
-2
-3
-show status like "Qcache_queries_in_cache";
-Variable_name	Value
-Qcache_queries_in_cache	0
-drop table t1;
-set autocommit=1;
-create table t1 (a int not null) engine=bdb;
-begin;
-insert into t1 values (1),(2),(3);
-select * from t1;
-a
-1
-2
-3
-show status like "Qcache_queries_in_cache";
-Variable_name	Value
-Qcache_queries_in_cache	0
-drop table t1;
-create table t1 (a int not null) engine=bdb;
-create table t2 (a int not null) engine=bdb;
-create table t3 (a int not null) engine=bdb;
-insert into t1 values (1),(2);
-insert into t2 values (1),(2);
-insert into t3 values (1),(2);
-select * from t1;
-a
-1
-2
-select * from t2;
-a
-1
-2
-select * from t3;
-a
-1
-2
-show status like "Qcache_queries_in_cache";
-Variable_name	Value
-Qcache_queries_in_cache	3
-show status like "Qcache_hits";
-Variable_name	Value
-Qcache_hits	0
-begin;
-select * from t1;
-a
-1
-2
-select * from t2;
-a
-1
-2
-select * from t3;
-a
-1
-2
-show status like "Qcache_queries_in_cache";
-Variable_name	Value
-Qcache_queries_in_cache	3
-show status like "Qcache_hits";
-Variable_name	Value
-Qcache_hits	0
-insert into t1 values (3);
-insert into t2 values (3);
-insert into t1 values (4);
-select * from t1;
-a
-1
-2
-3
-4
-select * from t2;
-a
-1
-2
-3
-select * from t3;
-a
-1
-2
-show status like "Qcache_queries_in_cache";
-Variable_name	Value
-Qcache_queries_in_cache	3
-show status like "Qcache_hits";
-Variable_name	Value
-Qcache_hits	0
-commit;
-show status like "Qcache_queries_in_cache";
-Variable_name	Value
-Qcache_queries_in_cache	1
-drop table if exists t1, t2, t3;

mysql-test/r/binlog_row_binlog.result

 drop table if exists t1, t2;
 reset master;
-create table t1 (a int) engine=bdb;
+create table t1 (a int) engine=innodb;
 create table t2 (a int) engine=innodb;
 begin;
 insert t1 values (5);
@@ -10,12 +10,12 @@ insert t2 values (5);
 commit;
 show binlog events from 102;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	#	Query	1	#	use `test`; create table t1 (a int) engine=bdb
+master-bin.000001	#	Query	1	#	use `test`; create table t1 (a int) engine=innodb
 master-bin.000001	#	Query	1	#	use `test`; create table t2 (a int) engine=innodb
 master-bin.000001	#	Query	1	#	use `test`; BEGIN
 master-bin.000001	#	Table_map	1	#	table_id: # (test.t1)
 master-bin.000001	#	Write_rows	1	#	table_id: # flags: STMT_END_F
-master-bin.000001	#	Query	1	#	use `test`; COMMIT
+master-bin.000001	#	Xid	1	#	COMMIT /* xid= */
 master-bin.000001	#	Query	1	#	use `test`; BEGIN
 master-bin.000001	#	Table_map	1	#	table_id: # (test.t2)
 master-bin.000001	#	Write_rows	1	#	table_id: # flags: STMT_END_F

mysql-test/r/binlog_stm_binlog.result

@@ -12,7 +12,7 @@ master-bin.000001	367	Xid	1	394	COMMIT /* XID */
 drop table t1;
 drop table if exists t1, t2;
 reset master;
-create table t1 (a int) engine=bdb;
+create table t1 (a int) engine=innodb;
 create table t2 (a int) engine=innodb;
 begin;
 insert t1 values (5);
@@ -22,11 +22,11 @@ insert t2 values (5);
 commit;
 show binlog events from 102;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	#	Query	1	#	use `test`; create table t1 (a int) engine=bdb
+master-bin.000001	#	Query	1	#	use `test`; create table t1 (a int) engine=innodb
 master-bin.000001	#	Query	1	#	use `test`; create table t2 (a int) engine=innodb
 master-bin.000001	#	Query	1	#	use `test`; BEGIN
 master-bin.000001	#	Query	1	#	use `test`; insert t1 values (5)
-master-bin.000001	#	Query	1	#	use `test`; COMMIT
+master-bin.000001	#	Xid	1	#	COMMIT /* xid= */
 master-bin.000001	#	Query	1	#	use `test`; BEGIN
 master-bin.000001	#	Query	1	#	use `test`; insert t2 values (5)
 master-bin.000001	#	Xid	1	#	COMMIT /* xid= */

mysql-test/r/ctype_utf8.result

@@ -479,7 +479,7 @@ drop table t1;
 create table t1 (
 c char(10) character set utf8,
 unique key a (c(1))
-) engine=bdb;
+) engine=innodb;
 insert into t1 values ('a'),('b'),('c'),('d'),('e'),('f');
 insert into t1 values ('aa');
 ERROR 23000: Duplicate entry 'aa' for key 'a'
@@ -637,7 +637,7 @@ drop table t1;
 create table t1 (
 c char(10) character set utf8 collate utf8_bin,
 unique key a (c(1))
-) engine=bdb;
+) engine=innodb;
 insert into t1 values ('a'),('b'),('c'),('d'),('e'),('f');
 insert into t1 values ('aa');
 ERROR 23000: Duplicate entry 'aa' for key 'a'
@@ -707,7 +707,7 @@ drop table t1;
 create table t1 (
 str varchar(255) character set utf8 not null,
 key str (str(2))
-) engine=bdb;
+) engine=innodb;
 INSERT INTO t1 VALUES ('str');
 INSERT INTO t1 VALUES ('str2');
 select * from t1 where str='str';
@@ -796,7 +796,7 @@ insert into t1 values(1,'foo'),(2,'foobar');
 select * from t1 where b like 'foob%';
 a	b
 2	foobar
-alter table t1 engine=bdb;
+alter table t1 engine=innodb;
 select * from t1 where b like 'foob%';
 a	b
 2	foobar

mysql-test/r/have_bdb.require

-Variable_name	Value
-have_bdb	YES

mysql-test/r/im_options.result

@@ -43,7 +43,6 @@ character-sets-dir	option_value
 basedir	option_value
 skip-stack-trace	option_value
 skip-innodb	option_value
-skip-bdb	option_value
 skip-ndbcluster	option_value
 nonguarded	option_value
 log-output	option_value
@@ -64,7 +63,6 @@ character-sets-dir	option_value
 basedir	option_value
 skip-stack-trace	option_value
 skip-innodb	option_value
-skip-bdb	option_value
 skip-ndbcluster	option_value
 nonguarded	option_value
 log-output	option_value

mysql-test/r/im_utils.result

@@ -22,7 +22,6 @@ basedir	VALUE
 server_id	VALUE
 skip-stack-trace	VALUE
 skip-innodb	VALUE
-skip-bdb	VALUE
 skip-ndbcluster	VALUE
 log-output	VALUE
 SHOW INSTANCE OPTIONS mysqld2;
@@ -41,7 +40,6 @@ basedir	VALUE
 server_id	VALUE
 skip-stack-trace	VALUE
 skip-innodb	VALUE
-skip-bdb	VALUE
 skip-ndbcluster	VALUE
 nonguarded	VALUE
 log-output	VALUE

mysql-test/r/index_merge_bdb.result

-drop table if exists t1;
-create table t1 (
-pk int primary key,
-key1 int,
-key2 int,  
-filler char(200),
-filler2 char(200),  
-index(key1),
-index(key2)
-) engine=bdb;
-select * from t1 where (key1 >= 2 and key1 <= 10) or (pk >= 4 and pk <=8 );
-pk	key1	key2	filler	filler2
-2	2	2	filler-data	filler-data-2
-3	3	3	filler-data	filler-data-2
-9	9	9	filler-data	filler-data-2
-10	10	10	filler-data	filler-data-2
-4	4	4	filler-data	filler-data-2
-5	5	5	filler-data	filler-data-2
-6	6	6	filler-data	filler-data-2
-7	7	7	filler-data	filler-data-2
-8	8	8	filler-data	filler-data-2
-set @maxv=1000;
-select * from t1 where 
-(pk < 5) or (pk > 10 and pk < 15) or (pk >= 50 and pk < 55 ) or (pk > @maxv-10) 
-or key1=18 or key1=60;
-pk	key1	key2	filler	filler2
-18	18	18	filler-data	filler-data-2
-60	60	60	filler-data	filler-data-2
-1	1	1	filler-data	filler-data-2
-2	2	2	filler-data	filler-data-2
-3	3	3	filler-data	filler-data-2
-4	4	4	filler-data	filler-data-2
-11	11	11	filler-data	filler-data-2
-12	12	12	filler-data	filler-data-2
-13	13	13	filler-data	filler-data-2
-14	14	14	filler-data	filler-data-2
-50	50	50	filler-data	filler-data-2
-51	51	51	filler-data	filler-data-2
-52	52	52	filler-data	filler-data-2
-53	53	53	filler-data	filler-data-2
-54	54	54	filler-data	filler-data-2
-991	991	991	filler-data	filler-data-2
-992	992	992	filler-data	filler-data-2
-993	993	993	filler-data	filler-data-2
-994	994	994	filler-data	filler-data-2
-995	995	995	filler-data	filler-data-2
-996	996	996	filler-data	filler-data-2
-997	997	997	filler-data	filler-data-2
-998	998	998	filler-data	filler-data-2
-999	999	999	filler-data	filler-data-2
-1000	1000	1000	filler-data	filler-data-2
-select * from t1 where 
-(pk < 5) or (pk > 10 and pk < 15) or (pk >= 50 and pk < 55 ) or (pk > @maxv-10) 
-or key1 < 3 or key1 > @maxv-11;
-pk	key1	key2	filler	filler2
-990	990	990	filler-data	filler-data-2
-1	1	1	filler-data	filler-data-2
-2	2	2	filler-data	filler-data-2
-3	3	3	filler-data	filler-data-2
-4	4	4	filler-data	filler-data-2
-11	11	11	filler-data	filler-data-2
-12	12	12	filler-data	filler-data-2
-13	13	13	filler-data	filler-data-2
-14	14	14	filler-data	filler-data-2
-50	50	50	filler-data	filler-data-2
-51	51	51	filler-data	filler-data-2
-52	52	52	filler-data	filler-data-2
-53	53	53	filler-data	filler-data-2
-54	54	54	filler-data	filler-data-2
-991	991	991	filler-data	filler-data-2
-992	992	992	filler-data	filler-data-2
-993	993	993	filler-data	filler-data-2
-994	994	994	filler-data	filler-data-2
-995	995	995	filler-data	filler-data-2
-996	996	996	filler-data	filler-data-2
-997	997	997	filler-data	filler-data-2
-998	998	998	filler-data	filler-data-2
-999	999	999	filler-data	filler-data-2
-1000	1000	1000	filler-data	filler-data-2
-select * from t1 where 
-(pk < 5) or (pk > 10 and pk < 15) or (pk >= 50 and pk < 55 ) or (pk > @maxv-10) 
-or
-(key1 < 5) or (key1 > 10 and key1 < 15) or (key1 >= 50 and key1 < 55 ) or (key1 > @maxv-10);
-pk	key1	key2	filler	filler2
-1	1	1	filler-data	filler-data-2
-2	2	2	filler-data	filler-data-2
-3	3	3	filler-data	filler-data-2
-4	4	4	filler-data	filler-data-2
-11	11	11	filler-data	filler-data-2
-12	12	12	filler-data	filler-data-2
-13	13	13	filler-data	filler-data-2
-14	14	14	filler-data	filler-data-2
-50	50	50	filler-data	filler-data-2
-51	51	51	filler-data	filler-data-2
-52	52	52	filler-data	filler-data-2
-53	53	53	filler-data	filler-data-2
-54	54	54	filler-data	filler-data-2
-991	991	991	filler-data	filler-data-2
-992	992	992	filler-data	filler-data-2
-993	993	993	filler-data	filler-data-2
-994	994	994	filler-data	filler-data-2
-995	995	995	filler-data	filler-data-2
-996	996	996	filler-data	filler-data-2
-997	997	997	filler-data	filler-data-2
-998	998	998	filler-data	filler-data-2
-999	999	999	filler-data	filler-data-2
-1000	1000	1000	filler-data	filler-data-2
-select * from t1 where 
-(pk > 10 and pk < 15) or (pk >= 50 and pk < 55 )
-or
-(key1 < 5) or (key1 > @maxv-10);
-pk	key1	key2	filler	filler2
-1	1	1	filler-data	filler-data-2
-2	2	2	filler-data	filler-data-2
-3	3	3	filler-data	filler-data-2
-4	4	4	filler-data	filler-data-2
-991	991	991	filler-data	filler-data-2
-992	992	992	filler-data	filler-data-2
-993	993	993	filler-data	filler-data-2
-994	994	994	filler-data	filler-data-2
-995	995	995	filler-data	filler-data-2
-996	996	996	filler-data	filler-data-2
-997	997	997	filler-data	filler-data-2
-998	998	998	filler-data	filler-data-2
-999	999	999	filler-data	filler-data-2
-1000	1000	1000	filler-data	filler-data-2
-11	11	11	filler-data	filler-data-2
-12	12	12	filler-data	filler-data-2
-13	13	13	filler-data	filler-data-2
-14	14	14	filler-data	filler-data-2
-50	50	50	filler-data	filler-data-2
-51	51	51	filler-data	filler-data-2
-52	52	52	filler-data	filler-data-2
-53	53	53	filler-data	filler-data-2
-54	54	54	filler-data	filler-data-2
-drop table t1;

mysql-test/r/log_tables.result

@@ -29,13 +29,13 @@ on (mysql.general_log.command_type = join_test.command_type)
 drop table join_test;
 flush logs;
 lock tables mysql.general_log WRITE;
-ERROR HY000: You can't write-lock a log table. Only read access is possible.
+ERROR HY000: You can't write-lock a log table. Only read access is possible
 lock tables mysql.slow_log WRITE;
-ERROR HY000: You can't write-lock a log table. Only read access is possible.
+ERROR HY000: You can't write-lock a log table. Only read access is possible
 lock tables mysql.general_log READ;
-ERROR HY000: You can't use usual read lock with log tables. Try READ LOCAL instead.
+ERROR HY000: You can't use usual read lock with log tables. Try READ LOCAL instead
 lock tables mysql.slow_log READ;
-ERROR HY000: You can't use usual read lock with log tables. Try READ LOCAL instead.
+ERROR HY000: You can't use usual read lock with log tables. Try READ LOCAL instead
 lock tables mysql.slow_log READ LOCAL, mysql.general_log READ LOCAL;
 unlock tables;
 lock tables mysql.general_log READ LOCAL;
@@ -161,13 +161,13 @@ TIMESTAMP	USER_HOST	THREAD_ID	1	Query	set global slow_query_log='ON'
 TIMESTAMP	USER_HOST	THREAD_ID	1	Query	select * from mysql.general_log
 flush logs;
 lock tables mysql.general_log WRITE;
-ERROR HY000: You can't write-lock a log table. Only read access is possible.
+ERROR HY000: You can't write-lock a log table. Only read access is possible
 lock tables mysql.slow_log WRITE;
-ERROR HY000: You can't write-lock a log table. Only read access is possible.
+ERROR HY000: You can't write-lock a log table. Only read access is possible
 lock tables mysql.general_log READ;
-ERROR HY000: You can't use usual read lock with log tables. Try READ LOCAL instead.
+ERROR HY000: You can't use usual read lock with log tables. Try READ LOCAL instead
 lock tables mysql.slow_log READ;
-ERROR HY000: You can't use usual read lock with log tables. Try READ LOCAL instead.
+ERROR HY000: You can't use usual read lock with log tables. Try READ LOCAL instead
 lock tables mysql.slow_log READ LOCAL, mysql.general_log READ LOCAL;
 unlock tables;
 set global general_log='OFF';

mysql-test/r/multi_update.result

@@ -492,7 +492,7 @@ create table t2 like t1;
 insert into t2 select * from t1;
 delete t1,t2 from t2,t1 where t1.a<'B' and t2.b=t1.b;
 drop table t1,t2;
-create table t1 ( c char(8) not null ) engine=bdb;
+create table t1 ( c char(8) not null ) engine=innodb;
 insert into t1 values ('0'),('1'),('2'),('3'),('4'),('5'),('6'),('7'),('8'),('9');
 insert into t1 values ('A'),('B'),('C'),('D'),('E'),('F');
 alter table t1 add b char(8) not null;

mysql-test/r/ndb_lock.result

@@ -64,17 +64,26 @@ pk	u	o
 insert into t1 values (1,1,1);
 drop table t1;
 create table t1 (x integer not null primary key, y varchar(32), z integer, key(z)) engine = ndb;
-insert into t1 values (1,'one',1), (2,'two',2),(3,"three",3);
+insert into t1 values (1,'one',1);
 begin;
 select * from t1 where x = 1 for update;
 x	y	z
 1	one	1
 begin;
-select * from t1 where x = 2 for update;
+select * from t1 where x = 1 for update;
+ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+rollback;
+rollback;
+insert into t1 values (2,'two',2),(3,"three",3);
+begin;
+select * from t1 where x = 1 for update;
 x	y	z
-2	two	2
+1	one	1
 select * from t1 where x = 1 for update;
 ERROR HY000: Lock wait timeout exceeded; try restarting transaction
+select * from t1 where x = 2 for update;
+x	y	z
+2	two	2
 rollback;
 commit;
 begin;

mysql-test/r/rowid_order_bdb.result

-drop table if exists t1, t2, t3,t4;
-create table t1 ( 
-pk1 int not NULL,
-key1 int(11),
-key2 int(11),
-PRIMARY KEY  (pk1),
-KEY key1 (key1),
-KEY key2 (key2)
-) engine=bdb;
-insert into t1 values (-5, 1, 1),
-(-100, 1, 1),
-(3, 1, 1),
-(0, 1, 1),
-(10, 1, 1);
-explain select * from t1 force index(key1, key2) where key1 < 3 or key2 < 3;
-id	select_type	table	type	possible_keys	key	key_len	ref	rows	Extra
-1	SIMPLE	t1	index_merge	key1,key2	key1,key2	5,5	NULL	5	Using sort_union(key1,key2); Using where
-select * from t1 force index(key1, key2) where key1 < 3 or key2 < 3;
-pk1	key1	key2
--100	1	1
--5	1	1
-0	1	1
-3	1	1
-10	1	1
-drop table t1;
-create table t1 ( 
-pk1 int unsigned not NULL,
-key1 int(11),
-key2 int(11),
-PRIMARY KEY  (pk1),
-KEY key1 (key1),
-KEY key2 (key2)
-) engine=bdb;
-insert into t1 values (0, 1, 1),
-(0xFFFFFFFF, 1, 1),
-(0xFFFFFFFE, 1, 1),
-(1, 1, 1),
-(2, 1, 1);
-select * from t1 force index(key1, key2) where key1 < 3 or key2 < 3;
-pk1	key1	key2
-0	1	1
-1	1	1
-2	1	1
-4294967294	1	1
-4294967295	1	1
-drop table t1;
-create table t1 ( 
-pk1 char(4) not NULL,
-key1 int(11),
-key2 int(11),
-PRIMARY KEY  (pk1),
-KEY key1 (key1),
-KEY key2 (key2)
-) engine=bdb collate latin2_general_ci;
-insert into t1 values ('a1', 1, 1),
-('b2', 1, 1),
-('A3', 1, 1),
-('B4', 1, 1);
-select * from t1 force index(key1, key2) where key1 < 3 or key2 < 3;
-pk1	key1	key2
-a1	1	1
-A3	1	1
-b2	1	1
-B4	1	1
-drop table t1;
-create table t1 (
-pk1 int not NULL,
-pk2 char(4) not NULL collate latin1_german1_ci,
-pk3 char(4) not NULL collate latin1_bin,
-key1 int(11),
-key2 int(11),
-PRIMARY KEY  (pk1,pk2,pk3),
-KEY key1 (key1),
-KEY key2 (key2)
-) engine=bdb;
-insert into t1 values 
-(1, 'u', 'u',        1, 1),
-(1, 'u', char(0xEC), 1, 1),
-(1, 'u', 'x',        1, 1);
-insert ignore into t1 select pk1, char(0xEC), pk3, key1, key2  from t1;
-insert ignore into t1 select pk1, 'x', pk3, key1, key2  from t1 where pk2='u';
-insert ignore into t1 select 2, pk2, pk3, key1, key2  from t1;
-select * from t1;
-pk1	pk2	pk3	key1	key2
-1		u	1	1
-1		x	1	1
-1			1	1
-1	u	u	1	1
-1	u	x	1	1
-1	u		1	1
-1	x	u	1	1
-1	x	x	1	1
-1	x		1	1
-2		u	1	1
-2		x	1	1
-2			1	1
-2	u	u	1	1
-2	u	x	1	1
-2	u		1	1
-2	x	u	1	1
-2	x	x	1	1
-2	x		1	1
-select * from t1 force index(key1, key2) where key1 < 3 or key2 < 3;
-pk1	pk2	pk3	key1	key2
-1		u	1	1
-1		x	1	1
-1			1	1
-1	u	u	1	1
-1	u	x	1	1
-1	u		1	1
-1	x	u	1	1
-1	x	x	1	1
-1	x		1	1
-2		u	1	1
-2		x	1	1
-2			1	1
-2	u	u	1	1
-2	u	x	1	1
-2	u		1	1
-2	x	u	1	1
-2	x	x	1	1
-2	x		1	1
-alter table t1 drop primary key;
-select * from t1;
-pk1	pk2	pk3	key1	key2
-1		u	1	1
-1		x	1	1
-1			1	1
-1	u	u	1	1
-1	u	x	1	1
-1	u		1	1
-1	x	u	1	1
-1	x	x	1	1
-1	x		1	1
-2		u	1	1
-2		x	1	1
-2			1	1
-2	u	u	1	1
-2	u	x	1	1
-2	u		1	1
-2	x	u	1	1
-2	x	x	1	1
-2	x		1	1
-select * from t1 force index(key1, key2) where key1 < 3 or key2 < 3;
-pk1	pk2	pk3	key1	key2
-1		u	1	1
-1		x	1	1
-1			1	1
-1	u	u	1	1
-1	u	x	1	1
-1	u		1	1
-1	x	u	1	1
-1	x	x	1	1
-1	x		1	1
-2		u	1	1
-2		x	1	1
-2			1	1
-2	u	u	1	1
-2	u	x	1	1
-2	u		1	1
-2	x	u	1	1
-2	x	x	1	1
-2	x		1	1
-drop table t1;
-create table t1  (
-pk1 varchar(8) NOT NULL default '',
-pk2 varchar(4) NOT NULL default '',
-key1 int(11),
-key2 int(11),
-primary key(pk1, pk2),
-KEY key1 (key1),
-KEY key2 (key2)
-) engine=bdb;
-insert into t1 values ('','empt',2,2),
-('a','a--a',2,2),
-('bb','b--b',2,2),
-('ccc','c--c',2,2),
-('dddd','d--d',2,2);
-select * from t1 force index(key1, key2) where key1 < 3 or key2 < 3;
-pk1	pk2	key1	key2
-	empt	2	2
-a	a--a	2	2
-bb	b--b	2	2
-ccc	c--c	2	2
-dddd	d--d	2	2
-drop table t1;

mysql-test/r/show_check.result

@@ -692,7 +692,7 @@ drop database mysqltest;
 show full plugin;
 show warnings;
 Level	Code	Message
-Warning	1541	The syntax 'SHOW PLUGIN' is deprecated and will be removed in MySQL 5.2. Please use 'SHOW PLUGINS' instead.
+Warning	1541	The syntax 'SHOW PLUGIN' is deprecated and will be removed in MySQL 5.2. Please use 'SHOW PLUGINS' instead
 show plugin;
 show plugins;
 End of 5.1 tests

mysql-test/r/sp_trans.result

@@ -535,7 +535,7 @@ use db_bug7787|
 CREATE PROCEDURE p1()
 SHOW INNODB STATUS; |
 Warnings:
-Warning	1541	The syntax 'SHOW INNODB STATUS' is deprecated and will be removed in MySQL 5.2. Please use 'SHOW ENGINE INNODB STATUS' instead.
+Warning	1541	The syntax 'SHOW INNODB STATUS' is deprecated and will be removed in MySQL 5.2. Please use 'SHOW ENGINE INNODB STATUS' instead
 GRANT EXECUTE ON PROCEDURE p1 TO user_bug7787@localhost|
 DROP DATABASE db_bug7787|
 drop user user_bug7787@localhost|

mysql-test/r/type_timestamp.result

@@ -101,13 +101,13 @@ create table t1 (t2 timestamp(2), t4 timestamp(4), t6 timestamp(6),
 t8 timestamp(8), t10 timestamp(10), t12 timestamp(12),
 t14 timestamp(14));
 Warnings:
-Warning	1541	The syntax 'TIMESTAMP(2)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead.
-Warning	1541	The syntax 'TIMESTAMP(4)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead.
-Warning	1541	The syntax 'TIMESTAMP(6)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead.
-Warning	1541	The syntax 'TIMESTAMP(8)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead.
-Warning	1541	The syntax 'TIMESTAMP(10)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead.
-Warning	1541	The syntax 'TIMESTAMP(12)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead.
-Warning	1541	The syntax 'TIMESTAMP(14)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead.
+Warning	1541	The syntax 'TIMESTAMP(2)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead
+Warning	1541	The syntax 'TIMESTAMP(4)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead
+Warning	1541	The syntax 'TIMESTAMP(6)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead
+Warning	1541	The syntax 'TIMESTAMP(8)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead
+Warning	1541	The syntax 'TIMESTAMP(10)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead
+Warning	1541	The syntax 'TIMESTAMP(12)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead
+Warning	1541	The syntax 'TIMESTAMP(14)' is deprecated and will be removed in MySQL 5.2. Please use 'TIMESTAMP' instead
 insert t1 values (0,0,0,0,0,0,0),
 ("1997-12-31 23:47:59", "1997-12-31 23:47:59", "1997-12-31 23:47:59",
 "1997-12-31 23:47:59", "1997-12-31 23:47:59", "1997-12-31 23:47:59",

mysql-test/r/warnings.result

@@ -175,7 +175,7 @@ Warning	1266	Using storage engine MyISAM for table 't1'
 drop table t1;
 set table_type=MYISAM;
 Warnings:
-Warning	1541	The syntax 'table_type' is deprecated and will be removed in MySQL 5.2. Please use 'storage_engine' instead.
+Warning	1541	The syntax 'table_type' is deprecated and will be removed in MySQL 5.2. Please use 'storage_engine' instead
 create table t1 (a int);
 insert into t1 (a) values (1), (2), (3), (4), (5), (6), (7), (8), (9), (10);
 update t1 set a='abc';

mysql-test/t/bdb-alter-table-1.test

-#
-# Test of problem when shutting down mysqld at once after ALTER TABLE
-#
--- source include/have_bdb.inc
---disable_warnings
-drop table if exists t1;
---enable_warnings
-
-create table t1(objid BIGINT not null, tablename  varchar(64), oid BIGINT not null, test BIGINT,  PRIMARY KEY (objid), UNIQUE(tablename))  engine=BDB;
-insert into t1 values(1, 't1',4,9);
-insert into t1 values(2, 'metatable',1,9);
-insert into t1 values(3, 'metaindex',1,9 );
-select * from t1;
-alter table t1 drop column test;
-
-# Now we do a reboot and continue with the next test
-
-# End of 4.1 tests

mysql-test/t/bdb-alter-table-2-master.opt

---skip-external-locking
-

mysql-test/t/bdb-alter-table-2.test

-#
-# Note that this test uses tables from the previous test
-# This is to test that the table t1 survives a reboot of MySQL
-# The options in the -master.opt file are just there to force the reboot
-#
--- source include/have_bdb.inc
-select * from t1;
-drop table t1;
-
-# End of 4.1 tests

mysql-test/t/bdb-crash.test

--- source include/have_bdb.inc
-
-# test for bug reported by Mark Steele
-
---disable_warnings
-drop table if exists t1;
---enable_warnings
-CREATE TABLE t1 (
-  ChargeID int(10) unsigned NOT NULL auto_increment,
-  ServiceID int(10) unsigned DEFAULT '0' NOT NULL,
-  ChargeDate date DEFAULT '0000-00-00' NOT NULL,
-  ChargeAmount decimal(20,2) DEFAULT '0.00' NOT NULL,
-  FedTaxes decimal(20,2) DEFAULT '0.00' NOT NULL,
-  ProvTaxes decimal(20,2) DEFAULT '0.00' NOT NULL,
-  ChargeStatus enum('New','Auth','Unauth','Sale','Denied','Refund')
-DEFAULT 'New' NOT NULL,
-  ChargeAuthorizationMessage text,
-  ChargeComment text,
-  ChargeTimeStamp varchar(20),
-  PRIMARY KEY (ChargeID),
-  KEY ServiceID (ServiceID),
-  KEY ChargeDate (ChargeDate)
-) engine=BDB;
-
-BEGIN;
-INSERT INTO t1
-VALUES(NULL,1,'2001-03-01',1,1,1,'New',NULL,NULL,'now');
-COMMIT;
-
-BEGIN;
-UPDATE t1 SET ChargeAuthorizationMessage = 'blablabla' WHERE
-ChargeID = 1;
-COMMIT;
-
-INSERT INTO t1
-VALUES(NULL,1,'2001-03-01',1,1,1,'New',NULL,NULL,'now');
-select * from t1;
-drop table t1;
-
-#
-# Test for bug #2342 "Running ANALYZE TABLE on bdb table 
-# inside a transaction hangs server thread"
-
-create table t1 (a int) engine=bdb;
-
-set autocommit=0;
-insert into t1 values(1);
-analyze table t1;
-drop table t1;
-
-# End of 4.1 tests

mysql-test/t/bdb-deadlock.test

-# This test doesn't work with the embedded version as this code
-# assumes that one query is running while we are doing queries on
-# a second connection.
-# This would work if mysqltest run would be threaded and handle each
-# connection in a separate thread.
-#
-
--- source include/not_embedded.inc
--- source include/have_bdb.inc
-
-connect (con1,localhost,root,,);
-connect (con2,localhost,root,,);
-
---disable_warnings
-drop table if exists t1,t2;
---enable_warnings
-connection con1;
-create table t1 (id integer, x integer) engine=BDB;
-create table t2 (id integer, x integer) engine=BDB;
-insert into t1 values(0, 0);
-insert into t2 values(0, 0);
-set autocommit=0;
-update t1 set x = 1 where id = 0;
-
-connection con2;
-set autocommit=0;
-update t2 set x = 1 where id = 0;
-
-# The following query should hang because con1 is locking the page
---send
-select x from t1 where id = 0;
-
-connection con1;
-# This should generate a deadlock as we are trying to access a locked row
---send
-select x from t2 where id = 0;
-
-connection con2;
---error 1213
-reap;
-commit;
-
-connection con1;
-reap;
-commit;
-
-connection con2;
-select * from t1;
-select * from t2;
-commit;
-
-connection con1;
-select * from t1;
-select * from t2;
-commit;
-
-drop table t1,t2;
-
-# End of 4.1 tests

mysql-test/t/bdb-deadlock.tminus

-# This test doesn't work with the embedded version as this code
-# assumes that one query is running while we are doing queries on
-# a second connection.
-# This would work if mysqltest run would be threaded and handle each
-# connection in a separate thread.
-#
-
-#-- source include/not_embedded.inc
--- source include/have_bdb.inc
-
-connect (con1,localhost,root,,);
-connect (con2,localhost,root,,);
-
---disable_warnings
-drop table if exists t1,t2;
---enable_warnings
-connection con1;
-create table t1 (id integer, x integer) engine=BDB;
-create table t2 (id integer, x integer) engine=BDB;
-insert into t1 values(0, 0);
-insert into t2 values(0, 0);
-set autocommit=0;
-update t1 set x = 1 where id = 0;
-
-connection con2;
-set autocommit=0;
-update t2 set x = 1 where id = 0;
-
-# The following query should hang because con1 is locking the page
---send
-select x from t1 where id = 0;
-
-connection con1;
-# This should generate a deadlock as we are trying to access a locked row
---send
-select x from t2 where id = 0;
-
-connection con2;
---error 1213
-reap;
-commit;
-
-connection con1;
-reap;
-commit;
-
-connection con2;
-select * from t1;
-select * from t2;
-commit;
-
-connection con1;
-select * from t1;
-select * from t2;
-commit;
-
-drop table t1,t2;
-
-# End of 4.1 tests

mysql-test/t/bdb_cache-master.opt

---set-variable=query_cache_size=1M

mysql-test/t/bdb_cache.test

--- source include/have_bdb.inc
--- source include/have_query_cache.inc
-
-#
-# Without auto_commit.
-#
---disable_warnings
-drop table if exists t1, t2, t3;
---enable_warnings
-flush status;
-set autocommit=0;
-create table t1 (a int not null) engine=bdb;
-insert into t1 values (1),(2),(3);
-select * from t1;
-show status like "Qcache_queries_in_cache";
-drop table t1;
-set autocommit=1;
-create table t1 (a int not null) engine=bdb;
-begin;
-insert into t1 values (1),(2),(3);
-select * from t1;
-show status like "Qcache_queries_in_cache";
-drop table t1;
-create table t1 (a int not null) engine=bdb;
-create table t2 (a int not null) engine=bdb;
-create table t3 (a int not null) engine=bdb;
-insert into t1 values (1),(2);
-insert into t2 values (1),(2);
-insert into t3 values (1),(2);
-select * from t1;
-select * from t2;
-select * from t3;
-show status like "Qcache_queries_in_cache";
-show status like "Qcache_hits";
-begin;
-select * from t1;
-select * from t2;
-select * from t3;
-show status like "Qcache_queries_in_cache";
-show status like "Qcache_hits";
-insert into t1 values (3);
-insert into t2 values (3);
-insert into t1 values (4);
-select * from t1;
-select * from t2;
-select * from t3;
-show status like "Qcache_queries_in_cache";
-show status like "Qcache_hits";
-commit;
-show status like "Qcache_queries_in_cache";
-drop table if exists t1, t2, t3;
-
-# End of 4.1 tests

mysql-test/t/bdb_gis.test

--- source include/have_bdb.inc
-SET storage_engine=bdb;
---source include/gis_generic.inc

mysql-test/t/ctype_utf8.test

@@ -360,7 +360,7 @@ drop table t1;
 create table t1 (
 c char(10) character set utf8,
 unique key a (c(1))
-) engine=bdb;
+) engine=innodb;
 --enable_warnings
 insert into t1 values ('a'),('b'),('c'),('d'),('e'),('f');
 --error 1062
@@ -483,7 +483,7 @@ drop table t1;
 create table t1 (
 c char(10) character set utf8 collate utf8_bin,
 unique key a (c(1))
-) engine=bdb;
+) engine=innodb;
 --enable_warnings
 insert into t1 values ('a'),('b'),('c'),('d'),('e'),('f');
 --error 1062
@@ -558,7 +558,7 @@ drop table t1;
 create table t1 (
   str varchar(255) character set utf8 not null,
   key str (str(2))
-) engine=bdb;
+) engine=innodb;
 --enable_warnings
 INSERT INTO t1 VALUES ('str');
 INSERT INTO t1 VALUES ('str2');
@@ -644,7 +644,7 @@ create table t1 (
 insert into t1 values(1,'foo'),(2,'foobar');
 select * from t1 where b like 'foob%';
 --disable_warnings
-alter table t1 engine=bdb;
+alter table t1 engine=innodb;
 --enable_warnings
 select * from t1 where b like 'foob%';
 drop table t1;

mysql-test/t/disabled.def

@@ -44,3 +44,4 @@ rpl_row_basic_7ndb       : BUG#21298 2006-07-27 msvensson
 rpl_truncate_7ndb        : BUG#21298 2006-07-27 msvensson
 crash_commit_before      : 2006-08-02 msvensson
 rpl_ndb_dd_advance       : BUG#18679 2006-07-28 jimw (Test fails randomly)
+federated_transactions   : Need to be re-enabled once Patrick's merge is complete

mysql-test/t/federated_transactions.test

@@ -10,7 +10,7 @@ CREATE TABLE federated.t1 (
     `id` int(20) NOT NULL,
     `name` varchar(32) NOT NULL default ''
     )
-  DEFAULT CHARSET=latin1 ENGINE=InnoDB;
+  DEFAULT CHARSET=latin1 ENGINE=innodb;
 
 connection master;
 DROP TABLE IF EXISTS federated.t1;

mysql-test/t/index_merge_bdb.test

-#
-# 2-sweeps read Index_merge test
-#
--- source include/have_bdb.inc
-
---disable_warnings
-drop table if exists t1;
---enable_warnings
-
-create table t1 (
-  pk int primary key,
-  key1 int,
-  key2 int,  
-  filler char(200),
-  filler2 char(200),  
-  index(key1),
-  index(key2)
-) engine=bdb;
-
-
---disable_query_log
-let $1=1000;
-while ($1)
-{
-  eval insert into t1 values($1, $1, $1, 'filler-data','filler-data-2');
-  dec $1;
-}
---enable_query_log
-
-select * from t1 where (key1 >= 2 and key1 <= 10) or (pk >= 4 and pk <=8 );
-
-set @maxv=1000;
-
-select * from t1 where 
-  (pk < 5) or (pk > 10 and pk < 15) or (pk >= 50 and pk < 55 ) or (pk > @maxv-10) 
-  or key1=18 or key1=60;
-
-select * from t1 where 
-  (pk < 5) or (pk > 10 and pk < 15) or (pk >= 50 and pk < 55 ) or (pk > @maxv-10) 
-  or key1 < 3 or key1 > @maxv-11;
-
-select * from t1 where 
-  (pk < 5) or (pk > 10 and pk < 15) or (pk >= 50 and pk < 55 ) or (pk > @maxv-10) 
-  or
-  (key1 < 5) or (key1 > 10 and key1 < 15) or (key1 >= 50 and key1 < 55 ) or (key1 > @maxv-10);
-
-select * from t1 where 
-  (pk > 10 and pk < 15) or (pk >= 50 and pk < 55 )
-  or
-  (key1 < 5) or (key1 > @maxv-10);
-
-drop table t1;

mysql-test/t/multi_update.test

@@ -485,7 +485,7 @@ delete t1,t2 from t2,t1 where t1.a<'B' and t2.b=t1.b;
 drop table t1,t2;
 
 --disable_warnings
-create table t1 ( c char(8) not null ) engine=bdb;
+create table t1 ( c char(8) not null ) engine=innodb;
 --enable_warnings
 
 insert into t1 values ('0'),('1'),('2'),('3'),('4'),('5'),('6'),('7'),('8'),('9');

mysql-test/t/ndb_lock.test

@@ -73,7 +73,7 @@ drop table t1;
 
 create table t1 (x integer not null primary key, y varchar(32), z integer, key(z)) engine = ndb;
 
-insert into t1 values (1,'one',1), (2,'two',2),(3,"three",3); 
+insert into t1 values (1,'one',1);
 
 # PK access
 connection con1;
@@ -82,11 +82,22 @@ select * from t1 where x = 1 for update;
 
 connection con2;
 begin;
-select * from t1 where x = 2 for update;
 --error 1205
 select * from t1 where x = 1 for update;
 rollback;
 
+connection con1;
+rollback;
+insert into t1 values (2,'two',2),(3,"three",3); 
+begin;
+select * from t1 where x = 1 for update;
+
+connection con2;
+--error 1205
+select * from t1 where x = 1 for update;
+select * from t1 where x = 2 for update;
+rollback;
+
 connection con1;
 commit;
 

mysql-test/t/ps_6bdb.test

-###############################################
-#                                             #
-#   Prepared Statements test on BDB tables    #
-#                                             #
-###############################################
-
-#    
-# NOTE: PLEASE SEE ps_1general.test (bottom) 
-#       BEFORE ADDING NEW TEST CASES HERE !!!
-
-use test;
-
--- source include/have_bdb.inc
-let $type= 'BDB' ;
--- source include/ps_create.inc
--- source include/ps_renew.inc
-
--- source include/ps_query.inc
--- source include/ps_modify.inc
--- source include/ps_modify1.inc
--- source include/ps_conv.inc
-
-drop table t1, t9;
-
-# End of 4.1 tests

mysys/base64.c

@@ -42,7 +42,7 @@ base64_needed_encoded_length(int length_of_data)
 int
 base64_needed_decoded_length(int length_of_encoded_data)
 {
-  return ceil(length_of_encoded_data * 3 / 4);
+  return (int)ceil(length_of_encoded_data * 3 / 4);
 }
 
 

mysys/my_pread.c

@@ -46,7 +46,7 @@ uint my_pread(File Filedes, byte *Buffer, uint Count, my_off_t offset,
       before seeking to the given offset
     */
 
-    error= (old_offset= lseek(Filedes, 0L, MY_SEEK_CUR)) == -1L ||
+    error= (old_offset= (off_t)lseek(Filedes, 0L, MY_SEEK_CUR)) == -1L ||
            lseek(Filedes, offset, MY_SEEK_SET) == -1L;
 
     if (!error)                                 /* Seek was successful */
@@ -121,7 +121,7 @@ uint my_pwrite(int Filedes, const byte *Buffer, uint Count, my_off_t offset,
       As we cannot change the file pointer, we save the old position,
       before seeking to the given offset
     */
-    error= ((old_offset= lseek(Filedes, 0L, MY_SEEK_CUR)) == -1L ||
+    error= ((old_offset= (off_t)lseek(Filedes, 0L, MY_SEEK_CUR)) == -1L ||
             lseek(Filedes, offset, MY_SEEK_SET) == -1L);
 
     if (!error)                                 /* Seek was successful */

netware/mysql_install_db.c

@@ -361,7 +361,6 @@ int mysql_install_db(int argc, char *argv[])
 	add_arg(&al, "--bootstrap");
 	add_arg(&al, "--skip-grant-tables");
 	add_arg(&al, "--skip-innodb");
-	add_arg(&al, "--skip-bdb");
 
   // spawn mysqld
   err = spawn(mysqld, &al, TRUE, sql_file, out_log, err_log);

netware/mysql_test_run.c

@@ -210,7 +210,6 @@ void install_db(char *datadir)
   add_arg(&al, "--basedir=%s", base_dir);
   add_arg(&al, "--datadir=%s", datadir);
   add_arg(&al, "--skip-innodb");
-  add_arg(&al, "--skip-bdb");
 
   // spawn
   if ((err = spawn(mysqld_file, &al, TRUE, input, output, error)) != 0)

scripts/mysql_install_db.sh

@@ -212,7 +212,7 @@ then
 fi
 mysqld_install_cmd_line="$mysqld $defaults $mysqld_opt --bootstrap \
 --skip-grant-tables --basedir=$basedir --datadir=$ldata --skip-innodb \
---skip-bdb --skip-ndbcluster $args --max_allowed_packet=8M --net_buffer_length=16K"
+--skip-ndbcluster $args --max_allowed_packet=8M --net_buffer_length=16K"
 if $scriptdir/mysql_create_system_tables $create_option $mdata $hostname $windows \
    | eval "$mysqld_install_cmd_line" 
 then

sql-common/my_time.c

@@ -429,7 +429,7 @@ str_to_datetime(const char *str, uint length, MYSQL_TIME *l_time,
     goto err;
   }
 
-  if (check_date(l_time, not_zero_date, flags, was_cut))
+  if ((my_bool)check_date(l_time, not_zero_date, flags, was_cut))
     goto err;
 
   l_time->time_type= (number_of_fields <= 3 ?

sql/CMakeLists.txt

@@ -8,8 +8,7 @@ INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/include
                     ${CMAKE_SOURCE_DIR}/sql 
                     ${CMAKE_SOURCE_DIR}/regex 
                     ${CMAKE_SOURCE_DIR}/zlib
-                    ${CMAKE_SOURCE_DIR}/storage/bdb/build_win32
-                    ${CMAKE_SOURCE_DIR}/storage/bdb/dbinc)
+)
 
 SET_SOURCE_FILES_PROPERTIES(${CMAKE_SOURCE_DIR}/sql/message.rc 
 							${CMAKE_SOURCE_DIR}/sql/message.h 
@@ -29,7 +28,7 @@ ADD_DEFINITIONS(-DHAVE_ROW_BASED_REPLICATION -DMYSQL_SERVER
 ADD_EXECUTABLE(mysqld ../sql-common/client.c derror.cc des_key_file.cc
                discover.cc ../libmysql/errmsg.c field.cc field_conv.cc 
                filesort.cc gstream.cc  ha_heap.cc ha_myisam.cc ha_myisammrg.cc
-               ha_innodb.cc ha_partition.cc ha_federated.cc ha_berkeley.cc
+               ha_innodb.cc ha_partition.cc ha_federated.cc
                handler.cc hash_filo.cc hash_filo.h 
                hostname.cc init.cc item.cc item_buff.cc item_cmpfunc.cc 
                item_create.cc item_func.cc item_geofunc.cc item_row.cc 
@@ -79,9 +78,6 @@ ENDIF(WITH_EXAMPLE_STORAGE_ENGINE)
 IF(WITH_INNOBASE_STORAGE_ENGINE)
   TARGET_LINK_LIBRARIES(mysqld innobase)
 ENDIF(WITH_INNOBASE_STORAGE_ENGINE)
-IF(WITH_BERKELEY_STORAGE_ENGINE)
-  TARGET_LINK_LIBRARIES(mysqld bdb)
-ENDIF(WITH_BERKELEY_STORAGE_ENGINE)
 
 ADD_DEPENDENCIES(mysqld GenError)
 

sql/field.cc

@@ -6571,7 +6571,7 @@ void Field_varstring::sql_type(String &res) const
 }
 
 
-uint Field_varstring::data_length(const char *from)
+uint32 Field_varstring::data_length(const char *from)
 {
   return length_bytes == 1 ? (uint) (uchar) *ptr : uint2korr(ptr);
 }