amari.xlog: Unify start with sync

Let's use "sync(reason=start)" instead of dedicated "start" event for
uniformity. Periodic syncs are now "sync(reason=periodic)" and after
logrotation support there will be also "pre-logrotate" and
"post-logrotate" reasons. Emit "sync(reason=stop)" at xlog shutdown for
uniformity and to make it more clear from looking at just enb.xlog about
what is xlog state at the end.

Stop requiring "start" to be present in the header - we will soon rework
xlog reader to look around for nearby sync automatically so that reading
could be started from any position in the stream.

amari/kpi.py

@@ -154,7 +154,7 @@ def _read(logm):
             x = LogError.EOF # represent EOF as LogError
 
         # ignore sync events
-        if isinstance(x, xlog.Event)  and  x.event == "sync":
+        if isinstance(x, xlog.SyncEvent):
             continue
 
         # handle messages that update current Measurement

amari/xlog.py

@@ -40,12 +40,12 @@
 # Queries are specific to monitored LTE service.
 # Events  are specific to xlog itself and can be as follows:
 #
-#   - "start"                       when xlog starts
 #   - "service attach"              when xlog successfully connects to monitored LTE service
 #   - "service detach"              when xlog disconnects from monitored LTE service
 #   - "service connect failure"     when xlog tries to connect to monitored LTE service
 #                                   with unsuccessful result.
-#   - "sync"                        emitted periodically with current state of
+#   - "sync"                        emitted periodically and when xlogs starts,
+#                                   stops (TODO and rotate logs). Comes with current state of
 #                                   connection to LTE service and xlog setup
 #   - "xlog failure"                on internal xlog error
 
@@ -128,6 +128,7 @@ class LogSpec:
 
 # xlog queries service @wsuri periodically according to queries specified by
 # logspecv and logs the result.
+@func
 def xlog(ctx, wsuri, logspecv):
     # make sure we always have meta.sync - either the caller specifies it
     # explicitly, or we add it automatically to come first with default
@@ -155,8 +156,11 @@ def xlog(ctx, wsuri, logspecv):
 
     xl = _XLogger(wsuri, logspecv, lsync.period)
 
-    slogspecv = ' '.join(['%s' % _ for _ in logspecv])
-    xl.jemit("start", {"generator": "xlog %s %s" % (wsuri, slogspecv)})
+    # emit sync at start/stop
+    xl.jemit_sync("detached", "start", {})
+    def _():
+        xl.jemit_sync("detached", "stop", {})
+    defer(_)
 
     while 1:
         try:
@@ -203,9 +207,10 @@ class _XLogger:
 
     # jemit_sync emits line with sync event to the log.
     # TODO logrotate at this point
-    def jemit_sync(xl, state, args_dict):
+    def jemit_sync(xl, state, reason, args_dict):
         tnow = time.now()
         d = {"state":   state,
+             "reason":  reason,
              "generator": "xlog %s %s" % (xl.wsuri, ' '.join(['%s' % _ for _ in xl.logspecv]))}
         d.update(args_dict)
         xl.jemit("sync", d)
@@ -217,7 +222,7 @@ class _XLogger:
         # emit sync periodically even in detached state
         # this is useful to still know e.g. intended logspec if the service is stopped for a long time
         if time.now() - xl.tsync  >=  xl.δt_sync:
-            xl.jemit_sync("detached", {})
+            xl.jemit_sync("detached", "periodic", {})
 
         # connect to the service
         try:
@@ -314,7 +319,7 @@ class _XLogger:
                     raise ctx.err()
 
             if logspec.query == 'meta.sync':
-                xl.jemit_sync("attached", srv_info)
+                xl.jemit_sync("attached", "periodic", srv_info)
             else:
                 resp_raw = req_(ctx, logspec.query, opts)
                 xl.emit(resp_raw)
@@ -429,6 +434,13 @@ class Message(xdict):
     # .timestamp    seconds since epoch
     pass
 
+# SyncEvent specializes Event and represents "sync" event in xlog.
+class SyncEvent(Event):
+    # .state
+    # .reason
+    # .generator
+    pass
+
 
 # Reader(r) creates new reader that will read xlog data from r.
 @func(Reader)
@@ -436,23 +448,6 @@ def __init__(xr, r):
     xr._r = r
     xr._lineno = 0
 
-    # parse header
-    try:
-        head = xr._jread1()
-        if head is None:
-            raise xr._err("header: unexpected EOF")
-        meta = head.get1("meta", dict)
-        ev0, t0 = xr._parse_metahead(meta)
-        if ev0 != "start":
-            raise xr._err("header: starts with meta.event=%s  ; expected `start`" % ev0)
-
-        gen = meta.get1("generator", str)
-        # TODO parse generator -> ._xlogspecv
-
-    except:
-        xr._r.close()
-        raise
-
 # close release resources associated with the Reader.
 @func(Reader)
 def close(xr):
@@ -469,6 +464,16 @@ def read(xr): # -> Event|Message|None
         x.__class__ = Event
         meta = x.get1("meta", dict)
         x.event, x.timestamp = xr._parse_metahead(meta)
+        if x.event in {"sync", "start"}:  # for backward compatibility with old logs meta:start
+            x.__class__ = SyncEvent       # is reported to users as sync(start) event
+            x.generator = meta.get1("generator", str)
+            if x.event == "start":
+                x.state  = "detached"
+                x.reason = "start"
+            else:
+                x.state  = meta.get1("state",  str)
+                x.reason = meta.get1("reason", str)
+            # TODO parse generator -> .logspecv
         return x
 
     if "message" in x:

amari/xlog_test.py

 # -*- coding: utf-8 -*-
-# Copyright (C) 2022  Nexedi SA and Contributors.
+# Copyright (C) 2022-2023  Nexedi SA and Contributors.
 #                          Kirill Smelkov <kirr@nexedi.com>
 #
 # This program is free software: you can Use, Study, Modify and Redistribute
@@ -38,8 +38,14 @@ zzzqqqrrrr
     xr = xlog.Reader(io.BytesIO(data))
     defer(xr.close)
 
-    # TODO check xr.tstart     == 0.01
-    # TODO check xr.xlogspecv  == ue_get[]/3.0s erab_get[]/3.0s
+    # :1
+    _ = xr.read()
+    assert type(_) is xlog.SyncEvent
+    assert _.event     == "start"
+    assert _.timestamp == 0.01
+    assert _ == {"meta": {"event":      "start",
+                          "time":       0.01,
+                          "generator":  "xlog ws://localhost:9001 ue_get[]/3.0s erab_get[]/3.0s"}}
 
     # :2
     _ = xr.read()