Commit 2e790057 authored by Mike Lewis's avatar Mike Lewis

Merge branch 'docs/add-missing-keywords' into 'master'

Add missing keywords

Closes #51675

See merge request gitlab-org/gitlab-ce!25444
parents d9e143c3 34e2414c
...@@ -11,11 +11,11 @@ description: "Learn how to use GitLab CI/CD, the GitLab built-in Continuous Inte ...@@ -11,11 +11,11 @@ description: "Learn how to use GitLab CI/CD, the GitLab built-in Continuous Inte
CI/CD is a vast area, so GitLab provides documentation for all levels of expertise. Consult the following table to find the right documentation for you: CI/CD is a vast area, so GitLab provides documentation for all levels of expertise. Consult the following table to find the right documentation for you:
| Level of expertise | Resource | | Level of expertise | Resource |
|:------------------------------------|:------------------------------------------------------------------------------------------------------------------------------------------------------| |:------------------------------------|:--------------------------------------------------------------------------------------------------------------------------------------|
| New to the concepts of CI and CD | For a high-level overview, read an [introduction to CI/CD with GitLab](introduction/index.md). | | New to the concepts of CI and CD | For a high-level overview, read an [introduction to CI/CD with GitLab](introduction/index.md). |
| Familiar with GitLab CI/CD concepts | After getting familiar with GitLab CI/CD, let us walk you through a simple example in our [quick start guide](quick_start/README.md). | | Familiar with GitLab CI/CD concepts | After getting familiar with GitLab CI/CD, let us walk you through a simple example in our [quick start guide](quick_start/README.md). |
| A GitLab CI/CD expert | Jump straight to our [`.gitlab.yml`](yaml/README.md) reference. | | A GitLab CI/CD expert | Jump straight to our [`.gitlab.yml`](yaml/README.md) reference. |
NOTE: **Note:** NOTE: **Note:**
Within the [DevOps lifecycle](../README.md#the-entire-devops-lifecycle), GitLab CI/CD spans Within the [DevOps lifecycle](../README.md#the-entire-devops-lifecycle), GitLab CI/CD spans
...@@ -25,12 +25,12 @@ the [Verify (CI)](../README.md#verify) and [Release (CD)](../README.md#release) ...@@ -25,12 +25,12 @@ the [Verify (CI)](../README.md#verify) and [Release (CD)](../README.md#release)
The following documentation provides the minimum required knowledge for making use of GitLab CI/CD: The following documentation provides the minimum required knowledge for making use of GitLab CI/CD:
| Topic | Description | | Topic | Description |
|:------------------------------------------------------------------------|:---------------------------------------------------------| |:------------------------------------------------------------------------------------|:----------------------------------------------------------------------------------------------------------------|
| [Getting started with GitLab CI/CD](quick_start/README.md) | Outlines the first steps for configuring GitLab CI/CD. | | [Getting started with GitLab CI/CD](quick_start/README.md) | Outlines the first steps for configuring GitLab CI/CD. |
| [Introduction to pipelines and jobs](pipelines.md) | Provides an overview of GitLab CI/CD and jobs. | | [Introduction to pipelines and jobs](pipelines.md) | Provides an overview of GitLab CI/CD and jobs. |
| [Configuration of your pipelines with `.gitlab-ci.yml`](yaml/README.md) | A comprehensive reference for the `.gitlab-ci.yml` file. | | [Configuration of your pipelines with `.gitlab-ci.yml`](yaml/README.md) | A comprehensive reference for the `.gitlab-ci.yml` file. |
| [`.gitlab-ci.yml` introduction](../user/project/pages/getting_started_part_four.md) | A step-by-step introduction to writing a GitLab CI/CD configuration file (`.gitlab-ci.yml`) for the first time. | | [`.gitlab-ci.yml` introduction](../user/project/pages/getting_started_part_four.md) | A step-by-step introduction to writing a GitLab CI/CD configuration file (`.gitlab-ci.yml`) for the first time. |
NOTE: **Note:** NOTE: **Note:**
Familiarity with [GitLab Runner](https://docs.gitlab.com/runner/) is useful because it is Familiarity with [GitLab Runner](https://docs.gitlab.com/runner/) is useful because it is
......
# Configuration of your pipelines with .gitlab-ci.yml # GitLab CI/CD Pipeline Configuration Reference
This document describes the usage of `.gitlab-ci.yml`, the file that is used by GitLab CI/CD [pipelines](../pipelines.md) are configured using a YAML file called `.gitlab-ci.yml` within each project.
GitLab Runner to manage your project's pipelines.
From version 7.12, GitLab CI uses a [YAML](https://en.wikipedia.org/wiki/YAML) The `.gitlab-ci.yml` file defines the structure and order of the pipelines and determines:
file (`.gitlab-ci.yml`) for the project configuration. It is placed in the root
of your repository and contains definitions of how your project should be built.
If you want a quick introduction to GitLab CI, follow our - What to execute using [GitLab Runner](https://docs.gitlab.com/runner/).
[quick start guide](../quick_start/README.md). - What decisions to make when specific conditions are encountered. For example, when a process succeeds or fails.
This topic covers CI/CD pipeline configuration. For other CI/CD configuration information, see:
- [GitLab CI/CD Variables](../variables/README.md), for configuring the environment the pipelines run in.
- [GitLab Runner advanced configuration](https://docs.gitlab.com/runner/configuration/advanced-configuration.html), for configuring GitLab Runner.
We have complete examples of configuring pipelines:
- For a quick introduction to GitLab CI, follow our [quick start guide](../quick_start/README.md).
- For a collection of examples, see [GitLab CI/CD Examples](../examples/README.md).
- To see a large `.gitlab-ci.yml` file used in an enterprise, see the [`.gitlab-ci.yml` file for `gitlab-ce`](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/.gitlab-ci.yml).
NOTE: **Note:** NOTE: **Note:**
If you have a [mirrored repository where GitLab pulls from](https://docs.gitlab.com/ee/workflow/repository_mirroring.html#pulling-from-a-remote-repository-starter), If you have a [mirrored repository where GitLab pulls from](https://docs.gitlab.com/ee/workflow/repository_mirroring.html#pulling-from-a-remote-repository-starter),
you may need to enable pipeline triggering in your project's you may need to enable pipeline triggering in your project's
**Settings > Repository > Pull from a remote repository > Trigger pipelines for mirror updates**. **Settings > Repository > Pull from a remote repository > Trigger pipelines for mirror updates**.
## Jobs ## Introduction
Pipeline configuration begins with jobs. Jobs are the most fundamental element of a `.gitlab-ci.yml` file.
The YAML file defines a set of jobs with constraints stating when they should Jobs are:
be run. You can specify an unlimited number of jobs which are defined as
top-level elements with an arbitrary name and always have to contain at least - Defined with constraints stating under what conditions they should be executed.
the `script` clause. - Top-level elements with an arbitrary name and must contain at least the [`script`](#script) clause.
- Not limited in how many can be defined.
For example:
```yaml ```yaml
job1: job1:
...@@ -39,6 +52,14 @@ Jobs are picked up by [Runners](../runners/README.md) and executed within the ...@@ -39,6 +52,14 @@ Jobs are picked up by [Runners](../runners/README.md) and executed within the
environment of the Runner. What is important, is that each job is run environment of the Runner. What is important, is that each job is run
independently from each other. independently from each other.
### Validate the .gitlab-ci.yml
Each instance of GitLab CI has an embedded debug tool called Lint, which validates the
content of your `.gitlab-ci.yml` files. You can find the Lint under the page `ci/lint` of your
project namespace. For example, `http://gitlab.example.com/gitlab-org/project-123/-/ci/lint`.
### Unavailable names for jobs
Each job must have a unique name, but there are a few **reserved `keywords` that Each job must have a unique name, but there are a few **reserved `keywords` that
cannot be used as job names**: cannot be used as job names**:
...@@ -51,42 +72,137 @@ cannot be used as job names**: ...@@ -51,42 +72,137 @@ cannot be used as job names**:
- `variables` - `variables`
- `cache` - `cache`
A job is defined by a list of parameters that define the job behavior. ### Using reserved keywords
| Keyword | Required | Description | If you get validation error when using specific values (for example, `true` or `false`), try to:
|---------------|----------|-------------|
| [script](#script) | yes | Defines a shell script which is executed by Runner | - Quote them.
| [extends](#extends) | no | Defines a configuration entry that this job is going to inherit from | - Change them to a different form. For example, `/bin/true`.
| [include](#include) | no | Defines a configuration entry that allows this job to include external YAML files |
| [image](#image-and-services) | no | Use docker image, covered in [Using Docker Images](../docker/using_docker_images.md#define-image-and-services-from-gitlab-ciyml) | ## Configuration parameters
| [services](#image-and-services) | no | Use docker services, covered in [Using Docker Images](../docker/using_docker_images.md#define-image-and-services-from-gitlab-ciyml) |
| [stage](#stage) | no | Defines a job stage (default: `test`) | A job is defined as a list of parameters that define the job's behavior.
| type | no | Alias for `stage` |
| [variables](#variables) | no | Define job variables on a job level | The following table lists available parameters for jobs:
| [only](#only-and-except-simplified) | no | Defines a list of git refs for which job is created |
| [except](#only-and-except-simplified) | no | Defines a list of git refs for which job is not created | | Keyword | Description |
| [tags](#tags) | no | Defines a list of tags which are used to select Runner | |:---------------------------------------------------|:----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| [allow_failure](#allow_failure) | no | Allow job to fail. Failed job doesn't contribute to commit status | | [`script`](#script) | Shell script which is executed by Runner. |
| [when](#when) | no | Define when to run job. Can be `on_success`, `on_failure`, `always` or `manual` | | [`image`](#image) | Use docker images. Also available: `image:name` and `image:entrypoint`. |
| [dependencies](#dependencies) | no | Define other jobs that a job depends on so that you can pass artifacts between them| | [`services`](#services) | Use docker services images. Also available: `services:name`, `services:alias`, `services:entrypoint`, and `services:command`. |
| [artifacts](#artifacts) | no | Define list of [job artifacts](#artifacts) | | [`before_script`](#before_script-and-after_script) | Override a set of commands that are executed before job. |
| [cache](#cache) | no | Define list of files that should be cached between subsequent runs | | [`after_script`](#before_script-and-after_script) | Override a set of commands that are executed after job. |
| [before_script](#before_script-and-after_script) | no | Override a set of commands that are executed before job | | [`stages`](#stages) | Define stages in a pipeline. |
| [after_script](#before_script-and-after_script) | no | Override a set of commands that are executed after job | | [`stage`](#stage) | Defines a job stage (default: `test`). |
| [environment](#environment) | no | Defines a name of environment to which deployment is done by this job | | [`only`](#onlyexcept-basic) | Limit when jobs are created. Also available: [`only:refs`, `only:kubernetes`, `only:variables`, and `only:changes`](#onlyexcept-advanced). |
| [coverage](#coverage) | no | Define code coverage settings for a given job | | [`except`](#onlyexcept-basic) | Limit when jobs are not created. Also available: [`except:refs`, `except:kubernetes`, `except:variables`, and `except:changes`](#onlyexcept-advanced). |
| [retry](#retry) | no | Define when and how many times a job can be auto-retried in case of a failure | | [`tags`](#tags) | List of tags which are used to select Runner. |
| [parallel](#parallel) | no | Defines how many instances of a job should be run in parallel | | [`allow_failure`](#allow_failure) | Allow job to fail. Failed job doesn't contribute to commit status. |
| [`when`](#when) | When to run job. Also available: `when:manual` and `when:delayed`. |
## `image` and `services` | [`environment`](#environment) | Name of an environment to which the job deploys. Also available: `environment:name`, `environment:url`, `environment:on_stop`, and `environment:action`. |
| [`cache`](#cache) | List of files that should be cached between subsequent runs. Also available: `cache:paths`, `cache:key`, `cache:untracked`, and `cache:policy`. |
This allows to specify a custom Docker image and a list of services that can be | [`artifacts`](#artifacts) | List of files and directories to attach to a job on success. Also available: `artifacts:paths`, `artifacts:name`, `artifacts:untracked`, `artifacts:when`, `artifacts:expire_in`, `artifacts:reports`, and `artifacts:reports:junit`.<br><br>In GitLab [Enterprise Edition](https://about.gitlab.com/pricing/), these are available: `artifacts:reports:codequality`, `artifacts:reports:sast`, `artifacts:reports:dependency_scanning`, `artifacts:reports:container_scanning`, `artifacts:reports:dast`, `artifacts:reports:license_management`, and `artifacts:reports:performance`. |
used for time of the job. The configuration of this feature is covered in | [`dependencies`](#dependencies) | Other jobs that a job depends on so that you can pass artifacts between them. |
[a separate document](../docker/README.md). | [`coverage`](#coverage) | Code coverage settings for a given job. |
| [`retry`](#retry) | When and how many times a job can be auto-retried in case of a failure. |
## `before_script` and `after_script` | [`parallel`](#parallel) | How many instances of a job should be run in parallel. |
| [`trigger`](#trigger-premium) | Defines a downstream pipeline trigger. |
> Introduced in GitLab 8.7 and requires GitLab Runner v1.2 | [`include`](#include) | Allows this job to include external YAML files. Also available: `include:local`, `include:file`, `include:template`, and `include:remote`. |
| [`extends`](#extends) | Configuration entry that this job is going to inherit from. |
| [`pages`](#pages) | Upload the result of a job to use with GitLab Pages. |
| [`variables`](#variables) | Define job variables on a job level. |
NOTE: **Note:**
Parameters `types` and `type` are [deprecated](#deprecated-parameters).
## Parameter details
The following are detailed explanations for parameters used to configure CI/CD pipelines.
### `script`
`script` is the only required keyword that a job needs. It's a shell script
which is executed by the Runner. For example:
```yaml
job:
script: "bundle exec rspec"
```
This parameter can also contain several commands using an array:
```yaml
job:
script:
- uname -a
- bundle exec rspec
```
NOTE: **Note:**
Sometimes, `script` commands will need to be wrapped in single or double quotes.
For example, commands that contain a colon (`:`) need to be wrapped in quotes so
that the YAML parser knows to interpret the whole thing as a string rather than
a "key: value" pair. Be careful when using special characters:
`:`, `{`, `}`, `[`, `]`, `,`, `&`, `*`, `#`, `?`, `|`, `-`, `<`, `>`, `=`, `!`, `%`, `@`, `` ` ``.
### `image`
Used to specify [a Docker image](../docker/using_docker_images.md#what-is-an-image) to use for the job.
For:
- Simple definition examples, see [Define `image` and `services` from .gitlab-ci.yml](../docker/using_docker_images.md#define-image-and-services-from-gitlab-ciyml).
- Detailed usage information, refer to [Docker integration](../docker/README.md) documentation.
#### `image:name`
An [extended docker configuration option](../docker/using_docker_images.md#extended-docker-configuration-options).
For more information, see [Available settings for `image`](../docker/using_docker_images.md#available-settings-for-image).
#### `image:entrypoint`
An [extended docker configuration option](../docker/using_docker_images.md#extended-docker-configuration-options).
For more information, see [Available settings for `image`](../docker/using_docker_images.md#available-settings-for-image).
### `services`
Used to specify a [service Docker image](../docker/using_docker_images.md#what-is-a-service), linked to a base image specified in [`image`](#image).
For:
- Simple definition examples, see [Define `image` and `services` from .gitlab-ci.yml](../docker/using_docker_images.md#define-image-and-services-from-gitlab-ciyml).
- Detailed usage information, refer to [Docker integration](../docker/README.md) documentation.
- For example services, see [GitLab CI Services](../services/README.md).
#### `services:name`
An [extended docker configuration option](../docker/using_docker_images.md#extended-docker-configuration-options).
For more information, see see [Available settings for `services`](../docker/using_docker_images.md#available-settings-for-services).
#### `services:alias`
An [extended docker configuration option](../docker/using_docker_images.md#extended-docker-configuration-options).
For more information, see see [Available settings for `services`](../docker/using_docker_images.md#available-settings-for-services).
#### `services:entrypoint`
An [extended docker configuration option](../docker/using_docker_images.md#extended-docker-configuration-options).
For more information, see see [Available settings for `services`](../docker/using_docker_images.md#available-settings-for-services).
#### `services:command`
An [extended docker configuration option](../docker/using_docker_images.md#extended-docker-configuration-options).
For more information, see see [Available settings for `services`](../docker/using_docker_images.md#available-settings-for-services).
### `before_script` and `after_script`
> Introduced in GitLab 8.7 and requires GitLab Runner v1.2.
`before_script` is used to define the command that should be run before all `before_script` is used to define the command that should be run before all
jobs, including deploy jobs, but after the restoration of [artifacts](#artifacts). jobs, including deploy jobs, but after the restoration of [artifacts](#artifacts).
...@@ -116,7 +232,7 @@ job: ...@@ -116,7 +232,7 @@ job:
- execute this after my script - execute this after my script
``` ```
## `stages` ### `stages`
`stages` is used to define stages that can be used by jobs and is defined `stages` is used to define stages that can be used by jobs and is defined
globally. globally.
...@@ -150,7 +266,7 @@ There are also two edge cases worth mentioning: ...@@ -150,7 +266,7 @@ There are also two edge cases worth mentioning:
`test` and `deploy` are allowed to be used as job's stage by default. `test` and `deploy` are allowed to be used as job's stage by default.
1. If a job doesn't specify a `stage`, the job is assigned the `test` stage. 1. If a job doesn't specify a `stage`, the job is assigned the `test` stage.
## `stage` ### `stage`
`stage` is defined per-job and relies on [`stages`](#stages) which is defined `stage` is defined per-job and relies on [`stages`](#stages) which is defined
globally. It allows to group jobs into different stages, and jobs of the same globally. It allows to group jobs into different stages, and jobs of the same
...@@ -179,38 +295,7 @@ job 4: ...@@ -179,38 +295,7 @@ job 4:
script: make deploy script: make deploy
``` ```
## `types` ### `only`/`except` (basic)
CAUTION: **Deprecated:**
`types` is deprecated, and could be removed in one of the future releases.
Use [stages](#stages) instead.
## `script`
`script` is the only required keyword that a job needs. It's a shell script
which is executed by the Runner. For example:
```yaml
job:
script: "bundle exec rspec"
```
This parameter can also contain several commands using an array:
```yaml
job:
script:
- uname -a
- bundle exec rspec
```
Sometimes, `script` commands will need to be wrapped in single or double quotes.
For example, commands that contain a colon (`:`) need to be wrapped in quotes so
that the YAML parser knows to interpret the whole thing as a string rather than
a "key: value" pair. Be careful when using special characters:
`:`, `{`, `}`, `[`, `]`, `,`, `&`, `*`, `#`, `?`, `|`, `-`, `<`, `>`, `=`, `!`, `%`, `@`, `` ` ``.
## `only` and `except` (simplified)
`only` and `except` are two parameters that set a job policy to limit when `only` and `except` are two parameters that set a job policy to limit when
jobs are created: jobs are created:
...@@ -299,7 +384,7 @@ job: ...@@ -299,7 +384,7 @@ job:
only: ['branches', 'tags'] only: ['branches', 'tags']
``` ```
## `only` and `except` (complex) ### `only`/`except` (advanced)
> - `refs` and `kubernetes` policies introduced in GitLab 10.0. > - `refs` and `kubernetes` policies introduced in GitLab 10.0.
> - `variables` policy introduced in GitLab 10.7. > - `variables` policy introduced in GitLab 10.7.
...@@ -323,7 +408,7 @@ If you use multiple keys under `only` or `except`, they act as an AND. The logic ...@@ -323,7 +408,7 @@ If you use multiple keys under `only` or `except`, they act as an AND. The logic
> (any of refs) AND (any of variables) AND (any of changes) AND (if kubernetes is active) > (any of refs) AND (any of variables) AND (any of changes) AND (if kubernetes is active)
### `only:refs` and `except:refs` #### `only:refs`/`except:refs`
The `refs` strategy can take the same values as the The `refs` strategy can take the same values as the
[simplified only/except configuration](#only-and-except-simplified). [simplified only/except configuration](#only-and-except-simplified).
...@@ -339,7 +424,7 @@ deploy: ...@@ -339,7 +424,7 @@ deploy:
- schedules - schedules
``` ```
### `only:kubernetes` and `except:kubernetes` #### `only:kubernetes`/`except:kubernetes`
The `kubernetes` strategy accepts only the `active` keyword. The `kubernetes` strategy accepts only the `active` keyword.
...@@ -352,7 +437,7 @@ deploy: ...@@ -352,7 +437,7 @@ deploy:
kubernetes: active kubernetes: active
``` ```
### `only:variables` and `except:variables` #### `only:variables`/`except:variables`
The `variables` keyword is used to define variables expressions. In other words, The `variables` keyword is used to define variables expressions. In other words,
you can use predefined variables / project / group or you can use predefined variables / project / group or
...@@ -384,7 +469,7 @@ end-to-end: ...@@ -384,7 +469,7 @@ end-to-end:
Learn more about [variables expressions](../variables/README.md#variables-expressions). Learn more about [variables expressions](../variables/README.md#variables-expressions).
### `only:changes` and `except:changes` #### `only:changes`/`except:changes`
Using the `changes` keyword with `only` or `except`, makes it possible to define if Using the `changes` keyword with `only` or `except`, makes it possible to define if
a job should be created based on files modified by a git push event. a job should be created based on files modified by a git push event.
...@@ -415,7 +500,7 @@ CAUTION: **Warning:** ...@@ -415,7 +500,7 @@ CAUTION: **Warning:**
There are some caveats when using this feature with new branches and tags. See There are some caveats when using this feature with new branches and tags. See
the section below. the section below.
#### Using `changes` with new branches and tags ##### Using `changes` with new branches and tags
If you are pushing a **new** branch or a **new** tag to GitLab, the policy If you are pushing a **new** branch or a **new** tag to GitLab, the policy
always evaluates to true and GitLab will create a job. This feature is not always evaluates to true and GitLab will create a job. This feature is not
...@@ -423,7 +508,7 @@ connected with merge requests yet, and because GitLab is creating pipelines ...@@ -423,7 +508,7 @@ connected with merge requests yet, and because GitLab is creating pipelines
before an user can create a merge request we don't know a target branch at before an user can create a merge request we don't know a target branch at
this point. this point.
#### Using `changes` with `merge_requests` ##### Using `changes` with `merge_requests`
With [pipelines for merge requests](../merge_request_pipelines/index.md), With [pipelines for merge requests](../merge_request_pipelines/index.md),
make it possible to define if a job should be created base on files modified make it possible to define if a job should be created base on files modified
...@@ -446,7 +531,7 @@ In the scenario above, if you create or update a merge request that changes ...@@ -446,7 +531,7 @@ In the scenario above, if you create or update a merge request that changes
either files in `service-one` folder or `Dockerfile`, GitLab creates and triggers either files in `service-one` folder or `Dockerfile`, GitLab creates and triggers
the `docker build service one` job. the `docker build service one` job.
## `tags` ### `tags`
`tags` is used to select specific Runners from the list of all Runners that are `tags` is used to select specific Runners from the list of all Runners that are
allowed to run this project. allowed to run this project.
...@@ -489,7 +574,7 @@ osx job: ...@@ -489,7 +574,7 @@ osx job:
- echo "Hello, $USER!" - echo "Hello, $USER!"
``` ```
## `allow_failure` ### `allow_failure`
`allow_failure` allows a job to fail without impacting the rest of the CI `allow_failure` allows a job to fail without impacting the rest of the CI
suite. suite.
...@@ -525,7 +610,7 @@ job3: ...@@ -525,7 +610,7 @@ job3:
- deploy_to_staging - deploy_to_staging
``` ```
## `when` ### `when`
`when` is used to implement jobs that are run in case of failure or despite the `when` is used to implement jobs that are run in case of failure or despite the
failure. failure.
...@@ -587,10 +672,8 @@ The above script will: ...@@ -587,10 +672,8 @@ The above script will:
success or failure. success or failure.
1. Allow you to manually execute `deploy_job` from GitLab's UI. 1. Allow you to manually execute `deploy_job` from GitLab's UI.
### `when:manual` #### `when:manual`
> **Notes:**
>
> - Introduced in GitLab 8.10. > - Introduced in GitLab 8.10.
> - Blocking manual actions were introduced in GitLab 9.0. > - Blocking manual actions were introduced in GitLab 9.0.
> - Protected actions were introduced in GitLab 9.2. > - Protected actions were introduced in GitLab 9.2.
...@@ -622,7 +705,7 @@ a user wants to trigger an action. In other words, in order to trigger a manual ...@@ -622,7 +705,7 @@ a user wants to trigger an action. In other words, in order to trigger a manual
action assigned to a branch that the pipeline is running for, the user needs to action assigned to a branch that the pipeline is running for, the user needs to
have the ability to merge to this branch. have the ability to merge to this branch.
### `when:delayed` #### `when:delayed`
> [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/21767) in GitLab 11.4. > [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/21767) in GitLab 11.4.
...@@ -658,10 +741,8 @@ This job will never be executed in the future unless you execute the job manuall ...@@ -658,10 +741,8 @@ This job will never be executed in the future unless you execute the job manuall
You can start a delayed job immediately by clicking the **Play** button. You can start a delayed job immediately by clicking the **Play** button.
GitLab runner will pick your job soon and start the job. GitLab runner will pick your job soon and start the job.
## `environment` ### `environment`
> **Notes:**
>
> - Introduced in GitLab 8.9. > - Introduced in GitLab 8.9.
> - You can read more about environments and find more examples in the > - You can read more about environments and find more examples in the
> [documentation about environments][environment]. > [documentation about environments][environment].
...@@ -683,10 +764,8 @@ deploy to production: ...@@ -683,10 +764,8 @@ deploy to production:
In the above example, the `deploy to production` job will be marked as doing a In the above example, the `deploy to production` job will be marked as doing a
deployment to the `production` environment. deployment to the `production` environment.
### `environment:name` #### `environment:name`
> **Notes:**
>
> - Introduced in GitLab 8.11. > - Introduced in GitLab 8.11.
> - Before GitLab 8.11, the name of an environment could be defined as a string like > - Before GitLab 8.11, the name of an environment could be defined as a string like
> `environment: production`. The recommended way now is to define it under the > `environment: production`. The recommended way now is to define it under the
...@@ -722,10 +801,8 @@ deploy to production: ...@@ -722,10 +801,8 @@ deploy to production:
name: production name: production
``` ```
### `environment:url` #### `environment:url`
> **Notes:**
>
> - Introduced in GitLab 8.11. > - Introduced in GitLab 8.11.
> - Before GitLab 8.11, the URL could be added only in GitLab's UI. The > - Before GitLab 8.11, the URL could be added only in GitLab's UI. The
> recommended way now is to define it in `.gitlab-ci.yml`. > recommended way now is to define it in `.gitlab-ci.yml`.
...@@ -749,10 +826,8 @@ deploy to production: ...@@ -749,10 +826,8 @@ deploy to production:
url: https://prod.example.com url: https://prod.example.com
``` ```
### `environment:on_stop` #### `environment:on_stop`
> **Notes:**
>
> - [Introduced][ce-6669] in GitLab 8.13. > - [Introduced][ce-6669] in GitLab 8.13.
> - Starting with GitLab 8.14, when you have an environment that has a stop action > - Starting with GitLab 8.14, when you have an environment that has a stop action
> defined, GitLab will automatically trigger a stop action when the associated > defined, GitLab will automatically trigger a stop action when the associated
...@@ -764,7 +839,7 @@ the environment. ...@@ -764,7 +839,7 @@ the environment.
Read the `environment:action` section for an example. Read the `environment:action` section for an example.
### `environment:action` #### `environment:action`
> [Introduced][ce-6669] in GitLab 8.13. > [Introduced][ce-6669] in GitLab 8.13.
...@@ -805,10 +880,8 @@ The `stop_review_app` job is **required** to have the following keywords defined ...@@ -805,10 +880,8 @@ The `stop_review_app` job is **required** to have the following keywords defined
- `stage` should be the same as the `review_app` in order for the environment - `stage` should be the same as the `review_app` in order for the environment
to stop automatically when the branch is deleted to stop automatically when the branch is deleted
### Dynamic environments #### Dynamic environments
> **Notes:**
>
> - [Introduced][ce-6323] in GitLab 8.12 and GitLab Runner 1.6. > - [Introduced][ce-6323] in GitLab 8.12 and GitLab Runner 1.6.
> - The `$CI_ENVIRONMENT_SLUG` was [introduced][ce-7983] in GitLab 8.15. > - The `$CI_ENVIRONMENT_SLUG` was [introduced][ce-7983] in GitLab 8.15.
> - The `name` and `url` parameters can use any of the defined CI variables, > - The `name` and `url` parameters can use any of the defined CI variables,
...@@ -841,10 +914,8 @@ The common use case is to create dynamic environments for branches and use them ...@@ -841,10 +914,8 @@ The common use case is to create dynamic environments for branches and use them
as Review Apps. You can see a simple example using Review Apps at as Review Apps. You can see a simple example using Review Apps at
<https://gitlab.com/gitlab-examples/review-apps-nginx/>. <https://gitlab.com/gitlab-examples/review-apps-nginx/>.
## `cache` ### `cache`
> **Notes:**
>
> - Introduced in GitLab Runner v0.7.0. > - Introduced in GitLab Runner v0.7.0.
> - `cache` can be set globally and per-job. > - `cache` can be set globally and per-job.
> - From GitLab 9.0, caching is enabled and shared between pipelines and jobs > - From GitLab 9.0, caching is enabled and shared between pipelines and jobs
...@@ -862,7 +933,7 @@ workspace. ...@@ -862,7 +933,7 @@ workspace.
If `cache` is defined outside the scope of jobs, it means it is set If `cache` is defined outside the scope of jobs, it means it is set
globally and all jobs will use that definition. globally and all jobs will use that definition.
### `cache:paths` #### `cache:paths`
Use the `paths` directive to choose which files or directories will be cached. Use the `paths` directive to choose which files or directories will be cached.
Wildcards can be used as well. Wildcards can be used as well.
...@@ -898,7 +969,7 @@ Note that since cache is shared between jobs, if you're using different ...@@ -898,7 +969,7 @@ Note that since cache is shared between jobs, if you're using different
paths for different jobs, you should also set a different **cache:key** paths for different jobs, you should also set a different **cache:key**
otherwise cache content can be overwritten. otherwise cache content can be overwritten.
### `cache:key` #### `cache:key`
> Introduced in GitLab Runner v1.0.0. > Introduced in GitLab Runner v1.0.0.
...@@ -939,7 +1010,7 @@ cache: ...@@ -939,7 +1010,7 @@ cache:
- binaries/ - binaries/
``` ```
### `cache:untracked` #### `cache:untracked`
Set `untracked: true` to cache all files that are untracked in your Git Set `untracked: true` to cache all files that are untracked in your Git
repository: repository:
...@@ -962,7 +1033,7 @@ rspec: ...@@ -962,7 +1033,7 @@ rspec:
- binaries/ - binaries/
``` ```
### `cache:policy` #### `cache:policy`
> Introduced in GitLab 9.4. > Introduced in GitLab 9.4.
...@@ -1009,10 +1080,8 @@ Additionally, if you have a job that unconditionally recreates the cache without ...@@ -1009,10 +1080,8 @@ Additionally, if you have a job that unconditionally recreates the cache without
reference to its previous contents, you can use `policy: push` in that job to reference to its previous contents, you can use `policy: push` in that job to
skip the download step. skip the download step.
## `artifacts` ### `artifacts`
> **Notes:**
>
> - Introduced in GitLab Runner v0.7.0 for non-Windows platforms. > - Introduced in GitLab Runner v0.7.0 for non-Windows platforms.
> - Windows support was added in GitLab Runner v.1.0.0. > - Windows support was added in GitLab Runner v.1.0.0.
> - From GitLab 9.2, caches are restored before artifacts. > - From GitLab 9.2, caches are restored before artifacts.
...@@ -1025,9 +1094,9 @@ attached to the job after success. ...@@ -1025,9 +1094,9 @@ attached to the job after success.
The artifacts will be sent to GitLab after the job finishes successfully and will The artifacts will be sent to GitLab after the job finishes successfully and will
be available for download in the GitLab UI. be available for download in the GitLab UI.
[Read more about artifacts.](../../user/project/pipelines/job_artifacts.md) [Read more about artifacts](../../user/project/pipelines/job_artifacts.md).
### `artifacts:paths` #### `artifacts:paths`
You can only use paths that are within the project workspace. To pass artifacts You can only use paths that are within the project workspace. To pass artifacts
between different jobs, see [dependencies](#dependencies). between different jobs, see [dependencies](#dependencies).
...@@ -1072,7 +1141,7 @@ release-job: ...@@ -1072,7 +1141,7 @@ release-job:
- tags - tags
``` ```
### `artifacts:name` #### `artifacts:name`
> Introduced in GitLab 8.6 and GitLab Runner v1.1.0. > Introduced in GitLab 8.6 and GitLab Runner v1.1.0.
...@@ -1153,7 +1222,7 @@ job: ...@@ -1153,7 +1222,7 @@ job:
- binaries/ - binaries/
``` ```
### `artifacts:untracked` #### `artifacts:untracked`
`artifacts:untracked` is used to add all Git untracked files as artifacts (along `artifacts:untracked` is used to add all Git untracked files as artifacts (along
to the paths defined in `artifacts:paths`). to the paths defined in `artifacts:paths`).
...@@ -1178,7 +1247,7 @@ artifacts: ...@@ -1178,7 +1247,7 @@ artifacts:
- binaries/ - binaries/
``` ```
### `artifacts:when` #### `artifacts:when`
> Introduced in GitLab 8.9 and GitLab Runner v1.3.0. > Introduced in GitLab 8.9 and GitLab Runner v1.3.0.
...@@ -1199,7 +1268,7 @@ job: ...@@ -1199,7 +1268,7 @@ job:
when: on_failure when: on_failure
``` ```
### `artifacts:expire_in` #### `artifacts:expire_in`
> Introduced in GitLab 8.9 and GitLab Runner v1.3.0. > Introduced in GitLab 8.9 and GitLab Runner v1.3.0.
...@@ -1234,7 +1303,7 @@ job: ...@@ -1234,7 +1303,7 @@ job:
expire_in: 1 week expire_in: 1 week
``` ```
### `artifacts:reports` #### `artifacts:reports`
> [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/20390) in > [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/20390) in
GitLab 11.2. Requires GitLab Runner 11.2 and above. GitLab 11.2. Requires GitLab Runner 11.2 and above.
...@@ -1252,7 +1321,7 @@ NOTE: **Note:** ...@@ -1252,7 +1321,7 @@ NOTE: **Note:**
If you also want the ability to browse the report output files, include the If you also want the ability to browse the report output files, include the
[`artifacts:paths`](#artifactspaths) keyword. [`artifacts:paths`](#artifactspaths) keyword.
#### `artifacts:reports:junit` ##### `artifacts:reports:junit`
> [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/20390) in > [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/20390) in
GitLab 11.2. Requires GitLab Runner 11.2 and above. GitLab 11.2. Requires GitLab Runner 11.2 and above.
...@@ -1286,7 +1355,7 @@ concatenated into a single file. Use a filename pattern (`junit: rspec-*.xml`), ...@@ -1286,7 +1355,7 @@ concatenated into a single file. Use a filename pattern (`junit: rspec-*.xml`),
an array of filenames (`junit: [rspec-1.xml, rspec-2.xml, rspec-3.xml]`), or a an array of filenames (`junit: [rspec-1.xml, rspec-2.xml, rspec-3.xml]`), or a
combination thereof (`junit: [rspec.xml, test-results/TEST-*.xml]`). combination thereof (`junit: [rspec.xml, test-results/TEST-*.xml]`).
#### `artifacts:reports:codequality` **[STARTER]** ##### `artifacts:reports:codequality` **[STARTER]**
> Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above. > Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above.
...@@ -1296,7 +1365,7 @@ as artifacts. ...@@ -1296,7 +1365,7 @@ as artifacts.
The collected Code Quality report will be uploaded to GitLab as an artifact and will The collected Code Quality report will be uploaded to GitLab as an artifact and will
be automatically shown in merge requests. be automatically shown in merge requests.
#### `artifacts:reports:sast` **[ULTIMATE]** ##### `artifacts:reports:sast` **[ULTIMATE]**
> Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above. > Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above.
...@@ -1307,7 +1376,7 @@ The collected SAST report will be uploaded to GitLab as an artifact and will ...@@ -1307,7 +1376,7 @@ The collected SAST report will be uploaded to GitLab as an artifact and will
be automatically shown in merge requests, pipeline view and provide data for security be automatically shown in merge requests, pipeline view and provide data for security
dashboards. dashboards.
#### `artifacts:reports:dependency_scanning` **[ULTIMATE]** ##### `artifacts:reports:dependency_scanning` **[ULTIMATE]**
> Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above. > Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above.
...@@ -1318,7 +1387,7 @@ The collected Dependency Scanning report will be uploaded to GitLab as an artifa ...@@ -1318,7 +1387,7 @@ The collected Dependency Scanning report will be uploaded to GitLab as an artifa
be automatically shown in merge requests, pipeline view and provide data for security be automatically shown in merge requests, pipeline view and provide data for security
dashboards. dashboards.
#### `artifacts:reports:container_scanning` **[ULTIMATE]** ##### `artifacts:reports:container_scanning` **[ULTIMATE]**
> Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above. > Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above.
...@@ -1329,7 +1398,7 @@ The collected Container Scanning report will be uploaded to GitLab as an artifac ...@@ -1329,7 +1398,7 @@ The collected Container Scanning report will be uploaded to GitLab as an artifac
be automatically shown in merge requests, pipeline view and provide data for security be automatically shown in merge requests, pipeline view and provide data for security
dashboards. dashboards.
#### `artifacts:reports:dast` **[ULTIMATE]** ##### `artifacts:reports:dast` **[ULTIMATE]**
> Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above. > Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above.
...@@ -1340,7 +1409,7 @@ The collected DAST report will be uploaded to GitLab as an artifact and will ...@@ -1340,7 +1409,7 @@ The collected DAST report will be uploaded to GitLab as an artifact and will
be automatically shown in merge requests, pipeline view and provide data for security be automatically shown in merge requests, pipeline view and provide data for security
dashboards. dashboards.
#### `artifacts:reports:license_management` **[ULTIMATE]** ##### `artifacts:reports:license_management` **[ULTIMATE]**
> Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above. > Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above.
...@@ -1351,7 +1420,7 @@ The collected License Management report will be uploaded to GitLab as an artifac ...@@ -1351,7 +1420,7 @@ The collected License Management report will be uploaded to GitLab as an artifac
be automatically shown in merge requests, pipeline view and provide data for security be automatically shown in merge requests, pipeline view and provide data for security
dashboards. dashboards.
#### `artifacts:reports:performance` **[PREMIUM]** ##### `artifacts:reports:performance` **[PREMIUM]**
> Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above. > Introduced in GitLab 11.5. Requires GitLab Runner 11.5 and above.
...@@ -1361,7 +1430,7 @@ as artifacts. ...@@ -1361,7 +1430,7 @@ as artifacts.
The collected Performance report will be uploaded to GitLab as an artifact and will The collected Performance report will be uploaded to GitLab as an artifact and will
be automatically shown in merge requests. be automatically shown in merge requests.
## `dependencies` ### `dependencies`
> Introduced in GitLab 8.6 and GitLab Runner v1.1.1. > Introduced in GitLab 8.6 and GitLab Runner v1.1.1.
...@@ -1420,7 +1489,7 @@ deploy: ...@@ -1420,7 +1489,7 @@ deploy:
script: make deploy script: make deploy
``` ```
### When a dependent job will fail #### When a dependent job will fail
> Introduced in GitLab 10.3. > Introduced in GitLab 10.3.
...@@ -1434,7 +1503,7 @@ You can ask your administrator to ...@@ -1434,7 +1503,7 @@ You can ask your administrator to
[flip this switch](../../administration/job_artifacts.md#validation-for-dependencies) [flip this switch](../../administration/job_artifacts.md#validation-for-dependencies)
and bring back the old behavior. and bring back the old behavior.
## `coverage` ### `coverage`
> [Introduced][ce-7447] in GitLab 8.17. > [Introduced][ce-7447] in GitLab 8.17.
...@@ -1454,7 +1523,7 @@ job1: ...@@ -1454,7 +1523,7 @@ job1:
coverage: '/Code coverage: \d+\.\d+/' coverage: '/Code coverage: \d+\.\d+/'
``` ```
## `retry` ### `retry`
> [Introduced][ce-12909] in GitLab 9.5. > [Introduced][ce-12909] in GitLab 9.5.
> [Behaviour expanded](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/21758) > [Behaviour expanded](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/21758)
...@@ -1528,7 +1597,7 @@ Possible values for `when` are: ...@@ -1528,7 +1597,7 @@ Possible values for `when` are:
- `missing_dependency_failure`: Retry if a dependency was missing. - `missing_dependency_failure`: Retry if a dependency was missing.
- `runner_unsupported`: Retry if the runner was unsupported. - `runner_unsupported`: Retry if the runner was unsupported.
## `parallel` ### `parallel`
> [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/22631) in GitLab 11.5. > [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/22631) in GitLab 11.5.
...@@ -1548,7 +1617,49 @@ test: ...@@ -1548,7 +1617,49 @@ test:
parallel: 5 parallel: 5
``` ```
## `include` ### `trigger` **[PREMIUM]**
> [Introduced](https://gitlab.com/gitlab-org/gitlab-ee/issues/8997) in [GitLab Premium](https://about.gitlab.com/pricing/) 11.8.
`trigger` allows you to define downstream pipeline trigger. When a job created
from `trigger` definition is started by GitLab, a downstream pipeline gets
created.
Learn more about [multi-project pipelines](https://docs.gitlab.com/ee/ci/multi_project_pipelines.html#creating-cross-project-pipelines-from-gitlab-ci-yml).
#### Simple `trigger` syntax
The most simple way to configure a downstream trigger to use `trigger` keyword
with a full path to a downstream project:
```yaml
rspec:
stage: test
script: bundle exec rspec
staging:
stage: deploy
trigger: my/deployment
```
#### Complex `trigger` syntax
It is possible to configure a branch name that GitLab will use to create
a downstream pipeline with:
```yaml
rspec:
stage: test
script: bundle exec rspec
staging:
stage: deploy
trigger:
project: my/deployment
branch: stable
```
### `include`
> - Introduced in [GitLab Premium](https://about.gitlab.com/pricing/) 10.5. > - Introduced in [GitLab Premium](https://about.gitlab.com/pricing/) 10.5.
> - Available for Starter, Premium and Ultimate since 10.6. > - Available for Starter, Premium and Ultimate since 10.6.
...@@ -1585,7 +1696,7 @@ of using YAML anchors, you can use the [`extends` keyword](#extends). ...@@ -1585,7 +1696,7 @@ of using YAML anchors, you can use the [`extends` keyword](#extends).
See [usage examples](#include-examples). See [usage examples](#include-examples).
### `include:local` #### `include:local`
`include:local` includes a file from the same repository as `.gitlab-ci.yml`. `include:local` includes a file from the same repository as `.gitlab-ci.yml`.
It's referenced using full paths relative to the root directory (`/`). It's referenced using full paths relative to the root directory (`/`).
...@@ -1607,7 +1718,7 @@ include: ...@@ -1607,7 +1718,7 @@ include:
- local: '/templates/.gitlab-ci-template.yml' - local: '/templates/.gitlab-ci-template.yml'
``` ```
### `include:file` #### `include:file`
> [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/53903) in GitLab 11.7. > [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/53903) in GitLab 11.7.
...@@ -1638,11 +1749,11 @@ include: ...@@ -1638,11 +1749,11 @@ include:
file: '/templates/.gitlab-ci-template.yml' file: '/templates/.gitlab-ci-template.yml'
``` ```
All nested includes will be executed in the scope of the target project, All [nested includes](#nested-includes) will be executed in the scope of the target project,
so it is possible to used local (relative to target project), project, remote so it is possible to used local (relative to target project), project, remote
or template includes. or template includes.
### `include:template` #### `include:template`
> [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/53445) in GitLab 11.7. > [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/53445) in GitLab 11.7.
...@@ -1657,10 +1768,10 @@ include: ...@@ -1657,10 +1768,10 @@ include:
- template: Auto-DevOps.gitlab-ci.yml - template: Auto-DevOps.gitlab-ci.yml
``` ```
All nested includes will be executed only with the permission of the user, All [nested includes](#nested-includes) will be executed only with the permission of the user,
so it is possible to use project, remote or template includes. so it is possible to use project, remote or template includes.
### `include:remote` #### `include:remote`
`include:remote` can be used to include a file from a different location, `include:remote` can be used to include a file from a different location,
using HTTP/HTTPS, referenced by using the full URL. The remote file must be using HTTP/HTTPS, referenced by using the full URL. The remote file must be
...@@ -1675,7 +1786,7 @@ include: ...@@ -1675,7 +1786,7 @@ include:
All nested includes will be executed without context as public user, so only another remote, All nested includes will be executed without context as public user, so only another remote,
or public project, or template is allowed. or public project, or template is allowed.
### Nested includes #### Nested includes
> [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/53903) in GitLab 11.7. > [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/53903) in GitLab 11.7.
...@@ -1683,11 +1794,11 @@ Nested includes allow you to compose a set of includes. ...@@ -1683,11 +1794,11 @@ Nested includes allow you to compose a set of includes.
A total of 50 includes is allowed. A total of 50 includes is allowed.
Duplicate includes are considered a configuration error. Duplicate includes are considered a configuration error.
### `include` examples #### `include` examples
Here are a few more `include` examples. Here are a few more `include` examples.
#### Single string or array of multiple values ##### Single string or array of multiple values
You can include your extra YAML file(s) either as a single string or You can include your extra YAML file(s) either as a single string or
an array of multiple values. The following examples are all valid. an array of multiple values. The following examples are all valid.
...@@ -1741,7 +1852,7 @@ include: ...@@ -1741,7 +1852,7 @@ include:
file: '/templates/.gitlab-ci-template.yml' file: '/templates/.gitlab-ci-template.yml'
``` ```
#### Re-using a `before_script` template ##### Re-using a `before_script` template
In the following example, the content of `.before-script-template.yml` will be In the following example, the content of `.before-script-template.yml` will be
automatically fetched and evaluated along with the content of `.gitlab-ci.yml`. automatically fetched and evaluated along with the content of `.gitlab-ci.yml`.
...@@ -1765,7 +1876,7 @@ rspec: ...@@ -1765,7 +1876,7 @@ rspec:
- bundle exec rspec - bundle exec rspec
``` ```
#### Overriding external template values ##### Overriding external template values
The following example shows specific YAML-defined variables and details of the The following example shows specific YAML-defined variables and details of the
`production` job from an include file being customized in `.gitlab-ci.yml`. `production` job from an include file being customized in `.gitlab-ci.yml`.
...@@ -1850,7 +1961,7 @@ In this case, if `install_dependencies` and `deploy` were not repeated in ...@@ -1850,7 +1961,7 @@ In this case, if `install_dependencies` and `deploy` were not repeated in
`.gitlab-ci.yml`, they would not be part of the script for the `production` `.gitlab-ci.yml`, they would not be part of the script for the `production`
job in the combined CI configuration. job in the combined CI configuration.
#### Using nested includes ##### Using nested includes
The examples below show how includes can be nested from different sources The examples below show how includes can be nested from different sources
using a combination of different methods. using a combination of different methods.
...@@ -1895,7 +2006,7 @@ docker-test: ...@@ -1895,7 +2006,7 @@ docker-test:
script: docker run my-image /run/tests.sh script: docker run my-image /run/tests.sh
``` ```
## `extends` ### `extends`
> Introduced in GitLab 11.3. > Introduced in GitLab 11.3.
...@@ -1976,7 +2087,7 @@ spinach: ...@@ -1976,7 +2087,7 @@ spinach:
script: rake spinach script: rake spinach
``` ```
## Using `extends` and `include` together ### Using `extends` and `include` together
`extends` works across configuration files combined with `include`. `extends` works across configuration files combined with `include`.
...@@ -2001,7 +2112,7 @@ useTemplate: ...@@ -2001,7 +2112,7 @@ useTemplate:
This will run a job called `useTemplate` that runs `echo Hello!` as defined in This will run a job called `useTemplate` that runs `echo Hello!` as defined in
the `.template` job, and uses the `alpine` Docker image as defined in the local job. the `.template` job, and uses the `alpine` Docker image as defined in the local job.
## `pages` ### `pages`
`pages` is a special job that is used to upload static content to GitLab that `pages` is a special job that is used to upload static content to GitLab that
can be used to serve your website. It has a special syntax, so the two can be used to serve your website. It has a special syntax, so the two
...@@ -2030,7 +2141,7 @@ pages: ...@@ -2030,7 +2141,7 @@ pages:
Read more on [GitLab Pages user documentation](../../user/project/pages/index.md). Read more on [GitLab Pages user documentation](../../user/project/pages/index.md).
## `variables` ### `variables`
> Introduced in GitLab Runner v0.5.0. > Introduced in GitLab Runner v0.5.0.
...@@ -2063,9 +2174,9 @@ you can set in `.gitlab-ci.yml`, there are also the so called ...@@ -2063,9 +2174,9 @@ you can set in `.gitlab-ci.yml`, there are also the so called
[Variables](../variables/README.md#variables) [Variables](../variables/README.md#variables)
which can be set in GitLab's UI. which can be set in GitLab's UI.
[Learn more about variables and their priority.][variables] Learn more about [variables and their priority][variables].
### Git strategy #### Git strategy
> Introduced in GitLab 8.9 as an experimental feature. May change or be removed > Introduced in GitLab 8.9 as an experimental feature. May change or be removed
> completely in future releases. `GIT_STRATEGY=none` requires GitLab Runner > completely in future releases. `GIT_STRATEGY=none` requires GitLab Runner
...@@ -2110,7 +2221,7 @@ NOTE: **Note:** `GIT_STRATEGY` is not supported for ...@@ -2110,7 +2221,7 @@ NOTE: **Note:** `GIT_STRATEGY` is not supported for
but may be in the future. See the [support Git strategy with Kubernetes executor feature proposal](https://gitlab.com/gitlab-org/gitlab-runner/issues/3847) but may be in the future. See the [support Git strategy with Kubernetes executor feature proposal](https://gitlab.com/gitlab-org/gitlab-runner/issues/3847)
for updates. for updates.
### Git submodule strategy #### Git submodule strategy
> Requires GitLab Runner v1.10+. > Requires GitLab Runner v1.10+.
...@@ -2148,9 +2259,9 @@ Note that for this feature to work correctly, the submodules must be configured ...@@ -2148,9 +2259,9 @@ Note that for this feature to work correctly, the submodules must be configured
- a relative path to another repository on the same GitLab server. See the - a relative path to another repository on the same GitLab server. See the
[Git submodules](../git_submodules.md) documentation. [Git submodules](../git_submodules.md) documentation.
### Git checkout #### Git checkout
> Introduced in GitLab Runner 9.3 > Introduced in GitLab Runner 9.3.
The `GIT_CHECKOUT` variable can be used when the `GIT_STRATEGY` is set to either The `GIT_CHECKOUT` variable can be used when the `GIT_STRATEGY` is set to either
`clone` or `fetch` to specify whether a `git checkout` should be run. If not `clone` or `fetch` to specify whether a `git checkout` should be run. If not
...@@ -2177,7 +2288,7 @@ script: ...@@ -2177,7 +2288,7 @@ script:
- git merge $CI_BUILD_REF_NAME - git merge $CI_BUILD_REF_NAME
``` ```
### Job stages attempts #### Job stages attempts
> Introduced in GitLab, it requires GitLab Runner v1.9+. > Introduced in GitLab, it requires GitLab Runner v1.9+.
...@@ -2201,7 +2312,7 @@ variables: ...@@ -2201,7 +2312,7 @@ variables:
You can set them globally or per-job in the [`variables`](#variables) section. You can set them globally or per-job in the [`variables`](#variables) section.
### Shallow cloning #### Shallow cloning
> Introduced in GitLab 8.9 as an experimental feature. May change in future > Introduced in GitLab 8.9 as an experimental feature. May change in future
releases or be removed completely. releases or be removed completely.
...@@ -2211,7 +2322,7 @@ shallow cloning of the repository which can significantly speed up cloning for ...@@ -2211,7 +2322,7 @@ shallow cloning of the repository which can significantly speed up cloning for
repositories with a large number of commits or old, large binaries. The value is repositories with a large number of commits or old, large binaries. The value is
passed to `git fetch` and `git clone`. passed to `git fetch` and `git clone`.
>**Note:** NOTE: **Note:**
If you use a depth of 1 and have a queue of jobs or retry If you use a depth of 1 and have a queue of jobs or retry
jobs, jobs may fail. jobs, jobs may fail.
...@@ -2234,6 +2345,22 @@ variables: ...@@ -2234,6 +2345,22 @@ variables:
You can set it globally or per-job in the [`variables`](#variables) section. You can set it globally or per-job in the [`variables`](#variables) section.
## Deprecated parameters
The following parameters are deprecated.
### `types`
CAUTION: **Deprecated:**
`types` is deprecated, and could be removed in a future release.
Use [`stages`](#stages) instead.
### `type`
CAUTION: **Deprecated:**
`type` is deprecated, and could be removed in one of the future releases.
Use [`stage`](#stage) instead.
## Special YAML features ## Special YAML features
It's possible to use special YAML features like anchors (`&`), aliases (`*`) It's possible to use special YAML features like anchors (`&`), aliases (`*`)
...@@ -2393,7 +2520,9 @@ You can see that the hidden keys are conveniently used as templates. ...@@ -2393,7 +2520,9 @@ You can see that the hidden keys are conveniently used as templates.
## Triggers ## Triggers
Triggers can be used to force a rebuild of a specific branch, tag or commit, Triggers can be used to force a rebuild of a specific branch, tag or commit,
with an API call. with an API call when a pipeline gets created using a trigger token.
Not to be confused with [`trigger`](#trigger-premium).
[Read more in the triggers documentation.](../triggers/README.md) [Read more in the triggers documentation.](../triggers/README.md)
...@@ -2409,22 +2538,6 @@ using Git 2.10 or newer: ...@@ -2409,22 +2538,6 @@ using Git 2.10 or newer:
git push -o ci.skip git push -o ci.skip
``` ```
## Validate the .gitlab-ci.yml
Each instance of GitLab CI has an embedded debug tool called Lint, which validates the
content of your `.gitlab-ci.yml` files. You can find the Lint under the page `ci/lint` of your
project namespace (e.g, `http://gitlab-example.com/gitlab-org/project-123/-/ci/lint`)
## Using reserved keywords
If you get validation error when using specific values (e.g., `true` or `false`),
try to quote them, or change them to a different form (e.g., `/bin/true`).
## Examples
See a [list of examples](../examples/README.md "CI/CD examples") for using
GitLab CI/CD with various languages.
[ce-6323]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/6323 [ce-6323]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/6323
[ce-6669]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/6669 [ce-6669]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/6669
[ce-7983]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/7983 [ce-7983]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/7983
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment