Skip to content

G
gitlab-ce
Commit 43fc0557 authored by Marin Jankovski's avatar Marin Jankovski
Browse files
Options

Merge branch 'docs/refactor-update-guides' into 'master' 

Refactor the upgrading from source docs

Closes gitlab-org/release/framework#190

See merge request gitlab-org/gitlab-ce!25003
parents 36854b97 f812c962
Hide whitespace changes
Inline Side-by-side
Showing with 709 additions and 17385 deletions
doc/administration/integration/terminal.md
View file @ 43fc0557
...@@ -64,8 +64,9 @@ narrower set of rules, you can restrict it to URLs ending with `/terminal.ws` ...@@ -64,8 +64,9 @@ narrower set of rules, you can restrict it to URLs ending with `/terminal.ws`
(although this may still have a few false positives). (although this may still have a few false positives).
If you installed from source, or have made any configuration changes to your If you installed from source, or have made any configuration changes to your
Omnibus installation before upgrading to 8.15, you may need to make some Omnibus installation before upgrading to 8.15, you may need to make some changes
changes to your configuration. See the [8.14 to 8.15 upgrade](../../update/8.14-to-8.15.md#nginx-configuration) to your configuration. See the [Upgrading Community Edition and Enterprise
Edition from source](../../update/upgrading_from_source.md#nginx-configuration)
document for more details. document for more details.
If you'd like to disable web terminal support in GitLab, just stop passing If you'd like to disable web terminal support in GitLab, just stop passing
......
doc/development/contributing/merge_request_workflow.md
View file @ 43fc0557
...@@ -89,6 +89,11 @@ request is as follows: ...@@ -89,6 +89,11 @@ request is as follows:
1. If your merge request introduces changes that require additional steps when 1. If your merge request introduces changes that require additional steps when
installing GitLab from source, add them to `doc/install/installation.md` in installing GitLab from source, add them to `doc/install/installation.md` in
the same merge request. the same merge request.
1. If your merge request introduces changes that require additional steps when
upgrading GitLab from source, add them to
`doc/update/upgrading_from_source.md` in the same merge request. If these
instructions are specific to a version, add them to the "Version specific
upgrading instructions" section.
Please keep the change in a single MR **as small as possible**. If you want to Please keep the change in a single MR **as small as possible**. If you want to
contribute a large feature think very hard what the minimum viable change is. contribute a large feature think very hard what the minimum viable change is.
......
doc/update/10.0-to-10.1.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 10.0 to 10.1 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.5.tar.gz
echo '3247e217d6745c27ef23bdc77b6abdb4b57a118f ruby-2.3.5.tar.gz' | shasum -c - && tar xzf ruby-2.3.5.tar.gz
cd ruby-2.3.5
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab now runs [webpack](http://webpack.js.org) to compile frontend assets and
it has a minimum requirement of node v4.3.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v4.3.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
Since 8.17, GitLab requires the use of yarn `>= v0.17.0` to manage
JavaScript dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 9.2 and higher only supports Go 1.8.3 and dropped support for Go
1.5.x through 1.7.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://storage.googleapis.com/golang/go1.8.3.linux-amd64.tar.gz
echo '1862f4c3d3907e59b04a757cfda0ea7aa9ef39274af99a784f5be843c80c6772 go1.8.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.8.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.8.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-1-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-1-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 11. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/10-0-stable:config/gitlab.yml.example origin/10-1-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/10-0-stable:lib/support/nginx/gitlab-ssl origin/10-1-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/10-0-stable:lib/support/nginx/gitlab origin/10-1-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-1-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-1-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/10-0-stable:lib/support/init.d/gitlab.default.example origin/10-1-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 12. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 13. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 14. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (10.0)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 9.5 to 10.0](9.5-to-10.0.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-1-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-1-stable/lib/support/init.d/gitlab.default.example
doc/update/10.1-to-10.2.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 10.1 to 10.2 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.5.tar.gz
echo '3247e217d6745c27ef23bdc77b6abdb4b57a118f ruby-2.3.5.tar.gz' | shasum -c - && tar xzf ruby-2.3.5.tar.gz
cd ruby-2.3.5
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab now runs [webpack](http://webpack.js.org) to compile frontend assets and
it has a minimum requirement of node v4.3.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v4.3.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
Since 8.17, GitLab requires the use of yarn `>= v0.17.0` to manage
JavaScript dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 9.2 and higher only supports Go 1.8.3 and dropped support for Go
1.5.x through 1.7.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://storage.googleapis.com/golang/go1.8.3.linux-amd64.tar.gz
echo '1862f4c3d3907e59b04a757cfda0ea7aa9ef39274af99a784f5be843c80c6772 go1.8.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.8.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.8.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-2-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-2-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 11. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/10-1-stable:config/gitlab.yml.example origin/10-2-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/10-1-stable:lib/support/nginx/gitlab-ssl origin/10-2-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/10-1-stable:lib/support/nginx/gitlab origin/10-2-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-2-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-2-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/10-1-stable:lib/support/init.d/gitlab.default.example origin/10-2-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 12. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 13. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 14. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (10.1)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 10.0 to 10.1](10.0-to-10.1.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-2-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-2-stable/lib/support/init.d/gitlab.default.example
doc/update/10.2-to-10.3.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 10.2 to 10.3 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.5.tar.gz
echo '3247e217d6745c27ef23bdc77b6abdb4b57a118f ruby-2.3.5.tar.gz' | shasum -c - && tar xzf ruby-2.3.5.tar.gz
cd ruby-2.3.5
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab now runs [webpack](http://webpack.js.org) to compile frontend assets.
We require a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
Since 8.17, GitLab requires the use of yarn `>= v0.17.0` to manage
JavaScript dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 9.2 and higher only supports Go 1.8.3 and dropped support for Go
1.5.x through 1.7.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://storage.googleapis.com/golang/go1.8.3.linux-amd64.tar.gz
echo '1862f4c3d3907e59b04a757cfda0ea7aa9ef39274af99a784f5be843c80c6772 go1.8.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.8.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.8.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-3-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-3-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 11. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/10-2-stable:config/gitlab.yml.example origin/10-3-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/10-2-stable:lib/support/nginx/gitlab-ssl origin/10-3-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/10-2-stable:lib/support/nginx/gitlab origin/10-3-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-3-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-3-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/10-2-stable:lib/support/init.d/gitlab.default.example origin/10-3-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 12. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 13. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 14. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (10.2)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 10.1 to 10.2](10.1-to-10.2.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-3-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-3-stable/lib/support/init.d/gitlab.default.example
doc/update/10.3-to-10.4.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 10.3 to 10.4 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.6.tar.gz
echo '4e6a0f828819e15d274ae58485585fc8b7caace0 ruby-2.3.6.tar.gz' | shasum -c - && tar xzf ruby-2.3.6.tar.gz
cd ruby-2.3.6
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab now runs [webpack](http://webpack.js.org) to compile frontend assets.
We require a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
Since 8.17, GitLab requires the use of yarn `>= v0.17.0` to manage
JavaScript dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 9.2 and higher only supports Go 1.8.3 and dropped support for Go
1.5.x through 1.7.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://storage.googleapis.com/golang/go1.8.3.linux-amd64.tar.gz
echo '1862f4c3d3907e59b04a757cfda0ea7aa9ef39274af99a784f5be843c80c6772 go1.8.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.8.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.8.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-4-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-4-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 11. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/10-3-stable:config/gitlab.yml.example origin/10-4-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/10-3-stable:lib/support/nginx/gitlab-ssl origin/10-4-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/10-3-stable:lib/support/nginx/gitlab origin/10-4-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-4-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-4-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/10-3-stable:lib/support/init.d/gitlab.default.example origin/10-4-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 12. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 13. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 14. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (10.3)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 10.2 to 10.3](10.2-to-10.3.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-4-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-4-stable/lib/support/init.d/gitlab.default.example
doc/update/10.4-to-10.5.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 10.4 to 10.5 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.6.tar.gz
echo '4e6a0f828819e15d274ae58485585fc8b7caace0 ruby-2.3.6.tar.gz' | shasum -c - && tar xzf ruby-2.3.6.tar.gz
cd ruby-2.3.6
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab now runs [webpack](http://webpack.js.org) to compile frontend assets.
We require a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
Since 8.17, GitLab requires the use of yarn `>= v0.17.0` to manage
JavaScript dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 9.2 and higher only supports Go 1.8.3 and dropped support for Go
1.5.x through 1.7.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://storage.googleapis.com/golang/go1.8.3.linux-amd64.tar.gz
echo '1862f4c3d3907e59b04a757cfda0ea7aa9ef39274af99a784f5be843c80c6772 go1.8.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.8.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.8.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-5-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-5-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 11. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/10-4-stable:config/gitlab.yml.example origin/10-5-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/10-4-stable:lib/support/nginx/gitlab-ssl origin/10-5-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/10-4-stable:lib/support/nginx/gitlab origin/10-5-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-5-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-5-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/10-4-stable:lib/support/init.d/gitlab.default.example origin/10-5-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 12. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 13. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 14. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (10.4)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 10.3 to 10.4](10.3-to-10.4.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-5-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-5-stable/lib/support/init.d/gitlab.default.example
doc/update/10.5-to-10.6.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 10.5 to 10.6 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.6.tar.gz
echo '4e6a0f828819e15d274ae58485585fc8b7caace0 ruby-2.3.6.tar.gz' | shasum -c - && tar xzf ruby-2.3.6.tar.gz
cd ruby-2.3.6
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab utilizes [webpack](http://webpack.js.org) to compile frontend assets.
This requires a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
GitLab also requires the use of yarn `>= v1.2.0` to manage JavaScript
dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 9.2 and higher only supports Go 1.8.3 and dropped support for Go
1.5.x through 1.7.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://storage.googleapis.com/golang/go1.8.3.linux-amd64.tar.gz
echo '1862f4c3d3907e59b04a757cfda0ea7aa9ef39274af99a784f5be843c80c6772 go1.8.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.8.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.8.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-6-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-6-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 11. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/10-5-stable:config/gitlab.yml.example origin/10-6-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/10-5-stable:lib/support/nginx/gitlab-ssl origin/10-6-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/10-5-stable:lib/support/nginx/gitlab origin/10-6-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-6-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-6-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/10-5-stable:lib/support/init.d/gitlab.default.example origin/10-6-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 12. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 13. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 14. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (10.5)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 10.4 to 10.5](10.4-to-10.5.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-6-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-6-stable/lib/support/init.d/gitlab.default.example
doc/update/10.6-to-10.7.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 10.6 to 10.7 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.6.tar.gz
echo '4e6a0f828819e15d274ae58485585fc8b7caace0 ruby-2.3.6.tar.gz' | shasum -c - && tar xzf ruby-2.3.6.tar.gz
cd ruby-2.3.6
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab utilizes [webpack](http://webpack.js.org) to compile frontend assets.
This requires a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
GitLab also requires the use of yarn `>= v1.2.0` to manage JavaScript
dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 9.2 and higher only supports Go 1.9 and dropped support for Go
1.5.x through 1.8.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://storage.googleapis.com/golang/go1.9.linux-amd64.tar.gz
echo 'd70eadefce8e160638a9a6db97f7192d8463069ab33138893ad3bf31b0650a79 go1.9.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.9.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.9.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-7-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-7-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 11. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/10-6-stable:config/gitlab.yml.example origin/10-7-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/10-6-stable:lib/support/nginx/gitlab-ssl origin/10-7-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/10-6-stable:lib/support/nginx/gitlab origin/10-7-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-7-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-7-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/10-6-stable:lib/support/init.d/gitlab.default.example origin/10-7-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 12. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 13. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 14. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (10.6)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 10.5 to 10.6](10.5-to-10.6.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-7-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-7-stable/lib/support/init.d/gitlab.default.example
doc/update/10.7-to-10.8.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 10.7 to 10.8 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download Ruby and compile it:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.7.tar.gz
echo '540996fec64984ab6099e34d2f5820b14904f15a ruby-2.3.7.tar.gz' | shasum -c - && tar xzf ruby-2.3.7.tar.gz
cd ruby-2.3.7
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab utilizes [webpack](http://webpack.js.org) to compile frontend assets.
This requires a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
GitLab also requires the use of yarn `>= v1.2.0` to manage JavaScript
dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 9.2 and higher only supports Go 1.8.3 and dropped support for Go
1.5.x through 1.7.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://storage.googleapis.com/golang/go1.8.3.linux-amd64.tar.gz
echo '1862f4c3d3907e59b04a757cfda0ea7aa9ef39274af99a784f5be843c80c6772 go1.8.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.8.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.8.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-8-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-8-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 11. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/10-7-stable:config/gitlab.yml.example origin/10-8-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/10-7-stable:lib/support/nginx/gitlab-ssl origin/10-8-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/10-7-stable:lib/support/nginx/gitlab origin/10-8-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-8-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-8-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/10-7-stable:lib/support/init.d/gitlab.default.example origin/10-8-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 12. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 13. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 14. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (10.7)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 10.6 to 10.7](10.6-to-10.7.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-8-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-8-stable/lib/support/init.d/gitlab.default.example
doc/update/10.8-to-11.0.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 10.8 to 11.0 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the branch (version) of GitLab you would
like to install (e.g., `11-0-stable`. You can select the branch in the version
dropdown at the top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 11.0 and higher only support Ruby 2.4.x and dropped support for Ruby 2.3.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download Ruby and compile it:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.4/ruby-2.4.4.tar.gz
echo 'ec82b0d53bd0adad9b19e6b45e44d54e9ec3f10c ruby-2.4.4.tar.gz' | shasum -c - && tar xzf ruby-2.4.4.tar.gz
cd ruby-2.4.4
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab utilizes [webpack](http://webpack.js.org) to compile frontend assets.
This requires a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
GitLab also requires the use of yarn `>= v1.2.0` to manage JavaScript
dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 11.0 and higher only supports Go 1.9.x and newer, and dropped support for Go
1.5.x through 1.8.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://dl.google.com/go/go1.10.3.linux-amd64.tar.gz
echo 'fa1b0e45d3b647c252f51f5e1204aba049cde4af177ef9f2181f43004f901035 go1.10.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.10.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.10.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-0-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-0-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 11. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/10-8-stable:config/gitlab.yml.example origin/11-0-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/10-8-stable:lib/support/nginx/gitlab-ssl origin/11-0-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/10-8-stable:lib/support/nginx/gitlab origin/11-0-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-0-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-0-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/10-8-stable:lib/support/init.d/gitlab.default.example origin/11-0-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 12. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 13. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 14. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (10.8)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 10.7 to 10.8](10.7-to-10.8.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-0-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-0-stable/lib/support/init.d/gitlab.default.example
doc/update/11.0-to-11.1.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 11.0 to 11.1 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the branch (version) of GitLab you would
like to install (e.g., `11-1-stable`. You can select the branch in the version
dropdown at the top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 11.0 and higher only support Ruby 2.4.x and dropped support for Ruby 2.3.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download Ruby and compile it:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.4/ruby-2.4.4.tar.gz
echo 'ec82b0d53bd0adad9b19e6b45e44d54e9ec3f10c ruby-2.4.4.tar.gz' | shasum -c - && tar xzf ruby-2.4.4.tar.gz
cd ruby-2.4.4
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab utilizes [webpack](http://webpack.js.org) to compile frontend assets.
This requires a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
GitLab also requires the use of yarn `>= v1.2.0` to manage JavaScript
dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 11.0 and higher only supports Go 1.9.x and newer, and dropped support for Go
1.5.x through 1.8.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://dl.google.com/go/go1.10.3.linux-amd64.tar.gz
echo 'fa1b0e45d3b647c252f51f5e1204aba049cde4af177ef9f2181f43004f901035 go1.10.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.10.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.10.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-1-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-1-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update gitlab-pages
#### Only needed if you use GitLab Pages.
Install and compile gitlab-pages. GitLab-Pages uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-pages
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_PAGES_VERSION)
sudo -u git -H make
```
### 11. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 12. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/11-0-stable:config/gitlab.yml.example origin/11-1-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/11-0-stable:lib/support/nginx/gitlab-ssl origin/11-1-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/11-0-stable:lib/support/nginx/gitlab origin/11-1-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-1-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-1-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/11-0-stable:lib/support/init.d/gitlab.default.example origin/11-1-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 13. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 14. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 15. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (11.0)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 10.8 to 11.0](10.8-to-11.0.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-1-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-1-stable/lib/support/init.d/gitlab.default.example
doc/update/11.1-to-11.2.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 11.1 to 11.2 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the branch (version) of GitLab you would
like to install (e.g., `11-2-stable`. You can select the branch in the version
dropdown at the top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 11.0 and higher only support Ruby 2.4.x and dropped support for Ruby 2.3.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download Ruby and compile it:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.4/ruby-2.4.4.tar.gz
echo 'ec82b0d53bd0adad9b19e6b45e44d54e9ec3f10c ruby-2.4.4.tar.gz' | shasum -c - && tar xzf ruby-2.4.4.tar.gz
cd ruby-2.4.4
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab utilizes [webpack](http://webpack.js.org) to compile frontend assets.
This requires a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
GitLab also requires the use of yarn `>= v1.2.0` to manage JavaScript
dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 11.0 and higher only supports Go 1.9.x and newer, and dropped support for Go
1.5.x through 1.8.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://dl.google.com/go/go1.10.3.linux-amd64.tar.gz
echo 'fa1b0e45d3b647c252f51f5e1204aba049cde4af177ef9f2181f43004f901035 go1.10.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.10.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.10.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-2-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-2-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update gitlab-pages
#### Only needed if you use GitLab Pages.
Install and compile gitlab-pages. GitLab-Pages uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-pages
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_PAGES_VERSION)
sudo -u git -H make
```
### 11. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 12. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/11-1-stable:config/gitlab.yml.example origin/11-2-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/11-1-stable:lib/support/nginx/gitlab-ssl origin/11-2-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/11-1-stable:lib/support/nginx/gitlab origin/11-2-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-2-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-2-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/11-1-stable:lib/support/init.d/gitlab.default.example origin/11-2-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 13. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 14. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 15. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (11.1)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 11.0 to 11.1](11.0-to-11.1.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-2-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-2-stable/lib/support/init.d/gitlab.default.example
doc/update/11.2-to-11.3.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 11.2 to 11.3 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the branch (version) of GitLab you would
like to install (e.g., `11-3-stable`. You can select the branch in the version
dropdown at the top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 11.0 and higher only support Ruby 2.4.x and dropped support for Ruby 2.3.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download Ruby and compile it:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.4/ruby-2.4.4.tar.gz
echo 'ec82b0d53bd0adad9b19e6b45e44d54e9ec3f10c ruby-2.4.4.tar.gz' | shasum -c - && tar xzf ruby-2.4.4.tar.gz
cd ruby-2.4.4
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab utilizes [webpack](http://webpack.js.org) to compile frontend assets.
This requires a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
GitLab also requires the use of yarn `>= v1.2.0` to manage JavaScript
dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 11.0 and higher only supports Go 1.9.x and newer, and dropped support for Go
1.5.x through 1.8.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://dl.google.com/go/go1.10.3.linux-amd64.tar.gz
echo 'fa1b0e45d3b647c252f51f5e1204aba049cde4af177ef9f2181f43004f901035 go1.10.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.10.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.10.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-3-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-3-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update gitlab-pages
#### Only needed if you use GitLab Pages.
Install and compile gitlab-pages. GitLab-Pages uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-pages
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_PAGES_VERSION)
sudo -u git -H make
```
### 11. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 12. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/11-2-stable:config/gitlab.yml.example origin/11-3-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/11-2-stable:lib/support/nginx/gitlab-ssl origin/11-3-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/11-2-stable:lib/support/nginx/gitlab origin/11-3-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-3-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-3-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/11-2-stable:lib/support/init.d/gitlab.default.example origin/11-3-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 13. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 14. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 15. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (11.2)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 11.1 to 11.2](11.1-to-11.2.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-3-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-3-stable/lib/support/init.d/gitlab.default.example
doc/update/11.3-to-11.4.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 11.3 to 11.4 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the branch (version) of GitLab you would
like to install (e.g., `11-4-stable`. You can select the branch in the version
dropdown at the top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 11.0 and higher only support Ruby 2.4.x and dropped support for Ruby 2.3.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download Ruby and compile it:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.4/ruby-2.4.5.tar.gz
echo '4d650f302f1ec00256450b112bb023644b6ab6dd ruby-2.4.5.tar.gz' | shasum -c - && tar xzf ruby-2.4.5.tar.gz
cd ruby-2.4.5
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab utilizes [webpack](http://webpack.js.org) to compile frontend assets.
This requires a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
GitLab also requires the use of yarn `>= v1.2.0` to manage JavaScript
dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 11.4 and higher only supports Go 1.10.x and newer, and dropped support for Go
1.9.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://dl.google.com/go/go1.10.3.linux-amd64.tar.gz
echo 'fa1b0e45d3b647c252f51f5e1204aba049cde4af177ef9f2181f43004f901035 go1.10.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.10.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.10.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-4-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-4-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update gitlab-pages
#### Only needed if you use GitLab Pages.
Install and compile gitlab-pages. GitLab-Pages uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-pages
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_PAGES_VERSION)
sudo -u git -H make
```
### 11. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 12. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/11-3-stable:config/gitlab.yml.example origin/11-4-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/11-3-stable:lib/support/nginx/gitlab-ssl origin/11-4-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/11-3-stable:lib/support/nginx/gitlab origin/11-4-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-4-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-4-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/11-3-stable:lib/support/init.d/gitlab.default.example origin/11-4-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 13. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 14. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 15. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (11.3)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 11.2 to 11.3](11.2-to-11.3.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-4-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-4-stable/lib/support/init.d/gitlab.default.example
doc/update/11.4-to-11.5.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 11.4 to 11.5 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the branch (version) of GitLab you would
like to install (e.g., `11-5-stable`. You can select the branch in the version
dropdown at the top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 11.0 and higher only support Ruby 2.4.x and dropped support for Ruby 2.3.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download Ruby and compile it:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.4/ruby-2.4.5.tar.gz
echo '4d650f302f1ec00256450b112bb023644b6ab6dd ruby-2.4.5.tar.gz' | shasum -c - && tar xzf ruby-2.4.5.tar.gz
cd ruby-2.4.5
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab utilizes [webpack](http://webpack.js.org) to compile frontend assets.
This requires a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
GitLab also requires the use of yarn `>= v1.2.0` to manage JavaScript
dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 11.4 and higher only supports Go 1.10.x and newer, and dropped support for Go
1.9.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://dl.google.com/go/go1.10.5.linux-amd64.tar.gz
echo 'a035d9beda8341b645d3f45a1b620cf2d8fb0c5eb409be36b389c0fd384ecc3a go1.10.5.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.10.5.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.10.5.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-5-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-5-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update gitlab-pages
#### Only needed if you use GitLab Pages.
Install and compile gitlab-pages. GitLab-Pages uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-pages
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_PAGES_VERSION)
sudo -u git -H make
```
### 11. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 12. Update configuration files
#### New `unicorn.rb` configuration
Note: we have made [changes](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/22372) to `unicorn.rb` to allow GitLab run with both Unicorn and Puma in future.
- Make `/home/git/gitlab/config/unicorn.rb` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/11-5-stable/config/unicorn.rb.example> but with your settings.
- In particular, make sure that `require_relative "/home/git/gitlab/lib/gitlab/cluster/lifecycle_events"` line exists and the `before_exec`, `before_fork`, and `after_fork` handlers are configured as shown below:
```ruby
require_relative "/home/git/gitlab/lib/gitlab/cluster/lifecycle_events"
before_exec do |server|
# Signal application hooks that we're about to restart
Gitlab::Cluster::LifecycleEvents.do_master_restart
end
before_fork do |server, worker|
# Signal application hooks that we're about to fork
Gitlab::Cluster::LifecycleEvents.do_before_fork
end
after_fork do |server, worker|
# Signal application hooks of worker start
Gitlab::Cluster::LifecycleEvents.do_worker_start
end
```
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/11-4-stable:config/gitlab.yml.example origin/11-5-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/11-4-stable:lib/support/nginx/gitlab-ssl origin/11-5-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/11-4-stable:lib/support/nginx/gitlab origin/11-5-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-5-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-5-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/11-4-stable:lib/support/init.d/gitlab.default.example origin/11-5-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 13. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 14. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 15. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (11.4)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 11.3 to 11.4](11.3-to-11.4.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-5-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-5-stable/lib/support/init.d/gitlab.default.example
doc/update/11.5-to-11.6.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 11.5 to 11.6 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the branch (version) of GitLab you would
like to install (e.g., `11-6-stable`. You can select the branch in the version
dropdown at the top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 11.0 and higher only support Ruby 2.4.x and dropped support for Ruby 2.3.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download Ruby and compile it:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.5/ruby-2.5.3.tar.gz
echo 'f919a9fbcdb7abecd887157b49833663c5c15fda ruby-2.5.3.tar.gz' | shasum -c - && tar xzf ruby-2.5.3.tar.gz
cd ruby-2.5.3
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab utilizes [webpack](http://webpack.js.org) to compile frontend assets.
This requires a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
GitLab also requires the use of yarn `>= v1.2.0` to manage JavaScript
dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 11.4 and higher only supports Go 1.10.x and newer, and dropped support for Go
1.9.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://dl.google.com/go/go1.10.5.linux-amd64.tar.gz
echo 'a035d9beda8341b645d3f45a1b620cf2d8fb0c5eb409be36b389c0fd384ecc3a go1.10.5.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.10.5.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.10.5.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-6-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-6-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update gitlab-pages
#### Only needed if you use GitLab Pages
Install and compile gitlab-pages. GitLab-Pages uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-pages
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_PAGES_VERSION)
sudo -u git -H make
```
### 11. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 12. Update configuration files
#### New `unicorn.rb` configuration
We have made [changes](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/22372) to `unicorn.rb` to allow GitLab run with both Unicorn and Puma in future.
Make `/home/git/gitlab/config/unicorn.rb` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/11-6-stable/config/unicorn.rb.example> but with your settings.
In particular, make sure that `require_relative "/home/git/gitlab/lib/gitlab/cluster/lifecycle_events"` line exists and the `before_exec`, `before_fork`, and `after_fork` handlers are configured as shown below:
```ruby
require_relative "/home/git/gitlab/lib/gitlab/cluster/lifecycle_events"
before_exec do |server|
# Signal application hooks that we're about to restart
Gitlab::Cluster::LifecycleEvents.do_master_restart
end
before_fork do |server, worker|
# Signal application hooks that we're about to fork
Gitlab::Cluster::LifecycleEvents.do_before_fork
end
after_fork do |server, worker|
# Signal application hooks of worker start
Gitlab::Cluster::LifecycleEvents.do_worker_start
end
```
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/11-5-stable:config/gitlab.yml.example origin/11-6-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/11-5-stable:lib/support/nginx/gitlab-ssl origin/11-6-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/11-5-stable:lib/support/nginx/gitlab origin/11-6-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-6-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-6-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/11-5-stable:lib/support/init.d/gitlab.default.example origin/11-6-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 13. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --deployment --without development test mysql aws kerberos
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --deployment --without development test postgres aws kerberos
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 14. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 15. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (11.5)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 11.4 to 11.5](11.4-to-11.5.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-6-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-6-stable/lib/support/init.d/gitlab.default.example
doc/update/11.6-to-11.7.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 11.6 to 11.7 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the branch (version) of GitLab you would
like to install (e.g., `11-7-stable`. You can select the branch in the version
dropdown at the top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: Beginning in GitLab 11.0, we only support Ruby 2.4 or higher, and dropped
support for Ruby 2.3. Be sure to upgrade if necessary.
You can check which version you are running with `ruby -v`.
Download Ruby and compile it:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.5/ruby-2.5.3.tar.gz
echo 'f919a9fbcdb7abecd887157b49833663c5c15fda ruby-2.5.3.tar.gz' | shasum -c - && tar xzf ruby-2.5.3.tar.gz
cd ruby-2.5.3
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab utilizes [webpack](http://webpack.js.org) to compile frontend assets.
This requires a minimum version of node v6.0.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v6.0.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
GitLab also requires the use of yarn `>= v1.10.0` to manage JavaScript
dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 11.4 and higher only supports Go 1.10.x and newer, and dropped support for Go
1.9.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://dl.google.com/go/go1.10.5.linux-amd64.tar.gz
echo 'a035d9beda8341b645d3f45a1b620cf2d8fb0c5eb409be36b389c0fd384ecc3a go1.10.5.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.10.5.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.10.5.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-7-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-7-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update gitlab-pages
#### Only needed if you use GitLab Pages
Install and compile gitlab-pages. GitLab-Pages uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-pages
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_PAGES_VERSION)
sudo -u git -H make
```
### 11. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 12. Update configuration files
#### New `unicorn.rb` configuration
We have made [changes](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/22372) to `unicorn.rb` to allow GitLab run with both Unicorn and Puma in future.
Make `/home/git/gitlab/config/unicorn.rb` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/11-7-stable/config/unicorn.rb.example> but with your settings.
In particular, make sure that `require_relative "/home/git/gitlab/lib/gitlab/cluster/lifecycle_events"` line exists and the `before_exec`, `before_fork`, and `after_fork` handlers are configured as shown below:
```ruby
require_relative "/home/git/gitlab/lib/gitlab/cluster/lifecycle_events"
before_exec do |server|
# Signal application hooks that we're about to restart
Gitlab::Cluster::LifecycleEvents.do_master_restart
end
before_fork do |server, worker|
# Signal application hooks that we're about to fork
Gitlab::Cluster::LifecycleEvents.do_before_fork
end
after_fork do |server, worker|
# Signal application hooks of worker start
Gitlab::Cluster::LifecycleEvents.do_worker_start
end
```
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/11-6-stable:config/gitlab.yml.example origin/11-7-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/11-6-stable:lib/support/nginx/gitlab-ssl origin/11-7-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/11-6-stable:lib/support/nginx/gitlab origin/11-7-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-7-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-7-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/11-6-stable:lib/support/init.d/gitlab.default.example origin/11-7-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 13. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --deployment --without development test mysql aws kerberos
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --deployment --without development test postgres aws kerberos
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 14. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 15. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (11.6)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 11.5 to 11.6](11.5-to-11.6.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-7-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-7-stable/lib/support/init.d/gitlab.default.example
doc/update/11.7-to-11.8.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 11.7 to 11.8 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the branch (version) of GitLab you would
like to install (e.g., `11-8-stable`. You can select the branch in the version
dropdown at the top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: Beginning in GitLab 11.0, we only support Ruby 2.4 or higher, and dropped
support for Ruby 2.3. Be sure to upgrade if necessary.
You can check which version you are running with `ruby -v`.
Download Ruby and compile it:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.5/ruby-2.5.3.tar.gz
echo 'f919a9fbcdb7abecd887157b49833663c5c15fda ruby-2.5.3.tar.gz' | shasum -c - && tar xzf ruby-2.5.3.tar.gz
cd ruby-2.5.3
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
NOTE: Beginning in GitLab 11.8, we only support node 8 or higher, and dropped
support for node 6. Be sure to upgrade if necessary.
GitLab utilizes [webpack](http://webpack.js.org) to compile frontend assets.
This requires a minimum version of node v8.10.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v8.10.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
GitLab also requires the use of yarn `>= v1.10.0` to manage JavaScript
dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 11.4 and higher only supports Go 1.10.x and newer, and dropped support for Go
1.9.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://dl.google.com/go/go1.10.5.linux-amd64.tar.gz
echo 'a035d9beda8341b645d3f45a1b620cf2d8fb0c5eb409be36b389c0fd384ecc3a go1.10.5.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.10.5.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.10.5.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-8-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 11-8-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update gitlab-pages
#### Only needed if you use GitLab Pages
Install and compile gitlab-pages. GitLab-Pages uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-pages
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_PAGES_VERSION)
sudo -u git -H make
```
### 11. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 12. Update configuration files
#### New `unicorn.rb` configuration
We have made [changes](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/22372) to `unicorn.rb` to allow GitLab run with both Unicorn and Puma in future.
Make `/home/git/gitlab/config/unicorn.rb` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/11-8-stable/config/unicorn.rb.example> but with your settings.
In particular, make sure that `require_relative "/home/git/gitlab/lib/gitlab/cluster/lifecycle_events"` line exists and the `before_exec`, `before_fork`, and `after_fork` handlers are configured as shown below:
```ruby
require_relative "/home/git/gitlab/lib/gitlab/cluster/lifecycle_events"
before_exec do |server|
# Signal application hooks that we're about to restart
Gitlab::Cluster::LifecycleEvents.do_master_restart
end
before_fork do |server, worker|
# Signal application hooks that we're about to fork
Gitlab::Cluster::LifecycleEvents.do_before_fork
end
after_fork do |server, worker|
# Signal application hooks of worker start
Gitlab::Cluster::LifecycleEvents.do_worker_start
end
```
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/11-7-stable:config/gitlab.yml.example origin/11-8-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/11-7-stable:lib/support/nginx/gitlab-ssl origin/11-8-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/11-7-stable:lib/support/nginx/gitlab origin/11-8-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-8-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-8-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/11-7-stable:lib/support/init.d/gitlab.default.example origin/11-8-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 13. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --deployment --without development test mysql aws kerberos
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --deployment --without development test postgres aws kerberos
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 14. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 15. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (11.7)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 11.6 to 11.7](11.6-to-11.7.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-8-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/11-8-stable/lib/support/init.d/gitlab.default.example
doc/update/2.6-to-3.0.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 2.6 to 3.0 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/2.6-to-3.0.md) for the most up to date instructions.*
## 1. Stop server & resque
sudo service gitlab stop
## 2. Update code & db
```bash
# Get latest code
git fetch origin
git checkout v3.0.3
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u gitlab -H vim Gemfile
# Install libs
sudo -u gitlab bundle install --without development test postgres
# update db
sudo -u gitlab bundle exec rake db:migrate RAILS_ENV=production
# !!! Config should be replaced with a new one. Check it after replace
cp config/gitlab.yml.example config/gitlab.yml
# update Gitolite hooks
# Gitolite v2:
sudo cp ./lib/hooks/post-receive /home/git/share/gitolite/hooks/common/post-receive
sudo chown git:git /home/git/share/gitolite/hooks/common/post-receive
# Gitolite v3:
sudo cp ./lib/hooks/post-receive /home/git/.gitolite/hooks/common/post-receive
sudo chown git:git /home/git/.gitolite/hooks/common/post-receive
# set valid path to hooks in gitlab.yml in git_host section
# like this
git_host:
# Gitolite 2
hooks_path: /home/git/share/gitolite/hooks
# Gitolite 3
hooks_path: /home/git/.gitolite/hooks/
# Make some changes to Gitolite config
# For more information visit https://github.com/gitlabhq/gitlabhq/pull/1719
# Gitolite v2
sudo -u git -H sed -i 's/\(GL_GITCONFIG_KEYS\s*=>*\s*\).\{2\}/\\1"\.\*"/g' /home/git/.gitolite.rc
# gitlite v3
sudo -u git -H sed -i "s/\(GIT_CONFIG_KEYS\s*=>*\s*\).\{2\}/\\1'\.\*'/g" /home/git/.gitolite.rc
# Check app status
sudo -u gitlab bundle exec rake gitlab:app:status RAILS_ENV=production
```
## 3. Start all
sudo service gitlab start
doc/update/2.9-to-3.0.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 2.9 to 3.0 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/2.9-to-3.0.md) for the most up to date instructions.*
## 1. Stop server & resque
sudo service gitlab stop
## 2. Follow instructions
```bash
# Get latest code
sudo -u gitlab -H git fetch origin
sudo -u gitlab -H git checkout v3.0.3
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u gitlab -H vim Gemfile
# Install gems
sudo -u gitlab -H bundle install --without development test postgres
# Migrate db
sudo -u gitlab -H bundle exec rake db:migrate RAILS_ENV=production
# Make some changes to gitolite v3 config
# For more information visit https://github.com/gitlabhq/gitlabhq/pull/1719
# Gitolite version 3
sudo -u git -H sed -i "s/\(GIT_CONFIG_KEYS\s*=>*\s*\).\{2\}/\\1'\.\*'/g" /home/git/.gitolite.rc
# If you still use gitolite v2
sudo -u git -H sed -i 's/\(GL_GITCONFIG_KEYS\s*=>*\s*\).\{2\}/\\1"\.\*"/g' /home/git/.gitolite.rc
# Check APP Status
sudo -u gitlab -H bundle exec rake gitlab:app:status RAILS_ENV=production
```
## 3. Start all
sudo service gitlab start
doc/update/3.0-to-3.1.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 3.0 to 3.1 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/3.0-to-3.1.md) for the most up to date instructions.*
**IMPORTANT!**
In this release **we moved Resque jobs under own gitlab namespace**
Despite a lot of advantages it requires from our users to **replace gitolite post-receive hook with new one**.
Most of projects has post-receive file as symlink to gitolite `/home/git/.gitolite/hooks/post-receive`. But some of them may have a real file. In this case you should rewrite it with symlink to gitolite hook.
I wrote a bash script which will do it automatically for you. Just make sure all path inside is valid for you
## 1. Stop server & resque
sudo service gitlab stop
## 2. Update GitLab
```bash
# Get latest code
sudo -u gitlab -H git fetch
sudo -u gitlab -H git checkout v3.1.0
# Install new charlock_holmes
sudo gem install charlock_holmes --version '0.6.9'
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u gitlab -H vim Gemfile
# Install gems for MySQL
sudo -u gitlab -H bundle install --without development test postgres sqlite
# Migrate db
sudo -u gitlab -H bundle exec rake db:migrate RAILS_ENV=production
```
## 3. Update post-receive hooks
### Gitolite 3
Step 1: Rewrite post-receive hook
```bash
# Rewrite hook for gitolite 3
sudo cp ./lib/hooks/post-receive /home/git/.gitolite/hooks/common/post-receive
sudo chown git:git /home/git/.gitolite/hooks/common/post-receive
```
Step 2: Rewrite hooks in all projects to symlink gitolite hook
```bash
# 1. Check for valid path
sudo -u gitlab -H vim lib/support/rewrite-hooks.sh
# 2. Run script
sudo -u git -H lib/support/rewrite-hooks.sh
```
### Gitolite v2
Step 1: rewrite post-receive hook for gitolite 2
```
sudo cp ./lib/hooks/post-receive /home/git/share/gitolite/hooks/common/post-receive
sudo chown git:git /home/git/share/gitolite/hooks/common/post-receive
```
Step 2: Replace symlinks in project to valid place
#!/bin/bash
src="/home/git/repositories"
for dir in `ls "$src/"`
do
if [ -d "$src/$dir" ]; then
if [ "$dir" = "gitolite-admin.git" ]
then
continue
fi
project_hook="$src/$dir/hooks/post-receive"
gitolite_hook="/home/git/share/gitolite/hooks/common/post-receive"
ln -s -f $gitolite_hook $project_hook
fi
done
## 4. Check app status
```bash
# Check APP Status
sudo -u gitlab -H bundle exec rake gitlab:app:status RAILS_ENV=production
```
## 5. Start all
sudo service gitlab start
doc/update/3.1-to-4.0.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 3.1 to 4.0 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/3.1-to-4.0.md) for the most up to date instructions.*
## Important changes
- Support for SQLite was dropped
- Support for Gitolite 2 was dropped
- Projects are organized in namespaces
- The GitLab post-receive hook needs to be updated
- The configuration file needs to be updated
- Availability of `python2` executable
Most of projects has post-receive file as symlink to Gitolite `/home/git/.gitolite/hooks/post-receive`. But some of them may have a real file. In this case you should rewrite it with symlink to Gitolite hook.
I wrote a bash script which will do it automatically for you. Just make sure all path inside is valid for you
## 1. Stop GitLab & Resque
sudo service gitlab stop
## 2. Update GitLab
```bash
# Get latest code
sudo -u gitlab -H git fetch
sudo -u gitlab -H git checkout 4-0-stable
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u gitlab -H vim Gemfile
# Install gems for MySQL
sudo -u gitlab -H bundle install --without development test postgres
# Update repos permissions
sudo chmod -R ug+rwXs /home/git/repositories/
sudo chown -R git:git /home/git/repositories/
# Migrate db
sudo -u gitlab -H bundle exec rake db:migrate RAILS_ENV=production
# Enable namespaces (**Warning!** All projects in groups will be moved to subdirectories)
sudo -u gitlab -H bundle exec rake gitlab:enable_namespaces RAILS_ENV=production
```
## 3. Update post-receive hooks (Requires Gitolite v3 )
Step 1: Rewrite post-receive hook
```bash
sudo cp ./lib/hooks/post-receive /home/git/.gitolite/hooks/common/post-receive
sudo chown git:git /home/git/.gitolite/hooks/common/post-receive
```
Step 2: Update project hooks to be symlinks to the Gitolite hook
```bash
# 1. Check paths in script
sudo -u gitlab -H vim lib/support/rewrite-hooks.sh
# 2. Run script
sudo -u git -H lib/support/rewrite-hooks.sh
```
## 4. Replace config with new one
# backup old one
sudo -u gitlab -H cp config/gitlab.yml config/gitlab.yml.old
# copy new one
sudo -u gitlab -H cp config/gitlab.yml.example config/gitlab.yml
# edit it
sudo -u gitlab -H vim config/gitlab.yml
## 5. Disable ssh known_host check for own domain
echo "Host localhost
StrictHostKeyChecking no
UserKnownHostsFile=/dev/null" | sudo tee -a /etc/ssh/ssh_config
echo "Host YOUR_DOMAIN_NAME
StrictHostKeyChecking no
UserKnownHostsFile=/dev/null" | sudo tee -a /etc/ssh/ssh_config
## 6. Check GitLab's status
sudo -u gitlab -H bundle exec rake gitlab:check RAILS_ENV=production
## 7. Start GitLab & Resque
sudo service gitlab start
doc/update/4.0-to-4.1.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 4.0 to 4.1 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/4.0-to-4.1.md) for the most up to date instructions.*
## Important changes
- Resque replaced with Sidekiq
- New options for configuration file added
- Init.d script should be updated
- **requires ruby1.9.3-p327**
## 1. Stop GitLab & Resque
sudo service gitlab stop
## 2. Update GitLab
```bash
# Set the working directory
cd /home/gitlab/gitlab/
# Get latest code
sudo -u gitlab -H git fetch
sudo -u gitlab -H git checkout 4-1-stable
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u gitlab -H vim Gemfile
# Install gems for MySQL
sudo -u gitlab -H bundle install --without development test postgres
# Migrate db
sudo -u gitlab -H bundle exec rake db:migrate RAILS_ENV=production
```
## 3. Replace init.d script with a new one
```
# backup old one
sudo mv /etc/init.d/gitlab /etc/init.d/gitlab.old
# get new one using sidekiq
sudo curl --location --output /etc/init.d/gitlab https://raw.github.com/gitlabhq/gitlab-recipes/4-1-stable/init.d/gitlab
sudo chmod +x /etc/init.d/gitlab
```
## 4. Check GitLab's status
sudo -u gitlab -H bundle exec rake gitlab:check RAILS_ENV=production
## 5. Start GitLab & Sidekiq
sudo service gitlab start
## 6. Remove old init.d script
sudo rm /etc/init.d/gitlab.old
doc/update/4.1-to-4.2.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 4.1 to 4.2 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/4.1-to-4.2.md) for the most up to date instructions.*
## 1. Stop server & Resque
sudo service gitlab stop
## 2. Update code & DB
```bash
#Set the working directory
cd /home/gitlab/gitlab/
# Get latest code
sudo -u gitlab -H git fetch
sudo -u gitlab -H git checkout 4-2-stable
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u gitlab -H vim Gemfile
# Run a bundle install without deployment to generate the new Gemfile
sudo -u gitlab -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u gitlab -H bundle install --without development test postgres --deployment
# update db
sudo -u gitlab -H bundle exec rake db:migrate RAILS_ENV=production
```
## 3. Check GitLab's status
```bash
sudo -u gitlab -H bundle exec rake gitlab:check RAILS_ENV=production
```
## 4. Start all
sudo service gitlab start
doc/update/4.2-to-5.0.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 4.2 to 5.0 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/4.2-to-5.0.md) for the most up to date instructions.*
## Warning
GitLab 5.0 is affected by critical security vulnerability CVE-2013-4490.
## Important changes
- We don't use `gitlab` user any more. Everything will be moved to `git` user
- Self signed SSL certificates are not supported until GitLab 5.1
- **requires ruby1.9.3**
## 0. Stop GitLab
sudo service gitlab stop
## 1. add bash to git user
```
sudo chsh -s /bin/bash git
```
## 2. git clone gitlab-shell
```
cd /home/git/
sudo -u git -H git clone https://github.com/gitlabhq/gitlab-shell.git /home/git/gitlab-shell
```
## 3. set up gitlab-shell
```bash
# chmod all repos and files under git
sudo chown git:git -R /home/git/repositories/
# login as git
sudo su git
cd /home/git/gitlab-shell
git checkout v1.1.0
# copy config
cp config.yml.example config.yml
# change URL to GitLab instance
# ! make sure the URL ends with '/' like 'https://gitlab.example/'
vim config.yml
# rewrite hooks
./support/rewrite-hooks.sh
# check ruby version for git user ( 1.9 required!! )
# GitLab shell requires system ruby 1.9
ruby -v
# exit from git user
exit
```
## 4. Copy GitLab instance to git user
```bash
sudo cp -R /home/gitlab/gitlab /home/git/gitlab
sudo chown git:git -R /home/git/gitlab
sudo rm -rf /home/gitlab/gitlab-satellites
# if exists
sudo rm /tmp/gitlab.socket
```
## 5. Update GitLab to recent version
```bash
cd /home/git/gitlab
# backup current config
sudo -u git -H cp config/gitlab.yml config/gitlab.yml.old
sudo -u git -H git fetch
sudo -u git -H git checkout 5-0-stable
# replace config with recent one
sudo -u git -H cp config/gitlab.yml.example config/gitlab.yml
# edit it
sudo -u git -H vim config/gitlab.yml
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
sudo -u git -H bundle exec rake gitlab:shell:setup RAILS_ENV=production
sudo -u git -H bundle exec rake gitlab:shell:build_missing_projects RAILS_ENV=production
sudo -u git -H mkdir -p /home/git/gitlab-satellites
sudo -u git -H bundle exec rake gitlab:satellites:create RAILS_ENV=production
# migrate wiki to git
sudo -u git -H bundle exec rake gitlab:wiki:migrate RAILS_ENV=production
# check permissions for /home/git/.ssh/
sudo -u git -H chmod 700 /home/git/.ssh
sudo -u git -H chmod 600 /home/git/.ssh/authorized_keys
# check permissions for /home/git/gitlab/
sudo chown -R git /home/git/gitlab/log/
sudo chown -R git /home/git/gitlab/tmp/
sudo chmod -R u+rwX /home/git/gitlab/log/
sudo chmod -R u+rwX /home/git/gitlab/tmp/
sudo -u git -H mkdir -p /home/git/gitlab/tmp/pids/
sudo chmod -R u+rwX /home/git/gitlab/tmp/pids
```
## 6. Update init.d script and Nginx config
```bash
# init.d
sudo rm /etc/init.d/gitlab
sudo curl --location --output /etc/init.d/gitlab https://raw.github.com/gitlabhq/gitlab-recipes/5-0-stable/init.d/gitlab
sudo chmod +x /etc/init.d/gitlab
# unicorn
sudo -u git -H cp /home/git/gitlab/config/unicorn.rb /home/git/gitlab/config/unicorn.rb.old
sudo -u git -H cp /home/git/gitlab/config/unicorn.rb.example /home/git/gitlab/config/unicorn.rb
# Nginx
# Replace path from '/home/gitlab/' to '/home/git/'
sudo vim /etc/nginx/sites-enabled/gitlab
sudo service nginx restart
```
## 7. Start GitLab instance
```
sudo service gitlab start
# check if unicorn and sidekiq started
# If not try to logout, also check replaced path from '/home/gitlab/' to '/home/git/'
# in Nginx, unicorn, init.d etc
ps aux | grep unicorn
ps aux | grep sidekiq
```
## 8. Check installation
```bash
# In 5-10 seconds lets check gitlab-shell
sudo -u git -H /home/git/gitlab-shell/bin/check
# Example of success output
# Check GitLab API access: OK
# Check directories and files:
# /home/git/repositories: OK
# /home/git/.ssh/authorized_keys: OK
# Now check GitLab instance
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
## 9. Cleanup
**If everything works as expected you can cleanup some old things**
Recommend you wait a bit and do a backup before completing the following.
```bash
# remove GitLab user from system
sudo userdel -r gitlab
cd /home/git
# cleanup .profile
## remove text from .profile added during gitolite installation:
## PATH=\$PATH:/home/git/bin
## export PATH
## to see what a clean .profile for new users on your system would look like see /etc/skel/.profile
sudo -u git -H vim .profile
# remove gitolite
sudo rm -R bin
sudo rm -Rf gitolite
sudo rm -R .gitolite
sudo rm .gitolite.rc
sudo rm -f gitlab.pub
sudo rm projects.list
# reset tmp folders
sudo service gitlab stop
cd /home/git/gitlab
sudo rm -R tmp
sudo -u git -H mkdir tmp
sudo chmod -R u+rwX tmp/
# create directory for pids, make sure GitLab can write to it
sudo -u git -H mkdir tmp/pids/
sudo chmod -R u+rwX tmp/pids/
# if you are already running a newer version of GitLab check that installation guide for other tmp folders you need to create
# reboot system
sudo reboot
# login, check that GitLab is running fine
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
doc/update/5.0-to-5.1.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 5.0 to 5.1 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/5.0-to-5.1.md) for the most up to date instructions.*
## Warning
GitLab 5.1 is affected by critical security vulnerability CVE-2013-4490.
## Release notes
- `unicorn` replaced with `puma`
- merge request cached diff will be truncated
## 1. Stop server
sudo service gitlab stop
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch
sudo -u git -H git checkout 5-1-stable
```
## 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.3.0
# replace your old config with the new one
sudo -u git -H mv config.yml config.yml.old
sudo -u git -H cp config.yml.example config.yml
# edit options to match old config
sudo -u git -H vi config.yml
```
## 4. Install libs, migrations etc
```bash
cd /home/git/gitlab
sudo rm tmp/sockets/gitlab.socket
sudo -u git -H cp config/puma.rb.example config/puma.rb
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
sudo -u git -H bundle exec rake migrate_merge_requests RAILS_ENV=production
sudo -u git -H bundle exec rake assets:precompile RAILS_ENV=production
```
## 5. Update init.d script with a new one
```bash
# init.d
sudo rm /etc/init.d/gitlab
sudo curl --location --output /etc/init.d/gitlab https://raw.github.com/gitlabhq/gitlab-recipes/5-1-stable/init.d/gitlab
sudo chmod +x /etc/init.d/gitlab
```
## 6. MySQL grant privileges
Only if you are using MySQL:
```bash
mysql -u root -p
mysql> GRANT LOCK TABLES ON `gitlabhq_production`.* TO 'gitlab'@'localhost';
mysql> \q
```
## 7. Start application
sudo service gitlab start
## 8. Check installation
```bash
# In 5-10 seconds lets check gitlab-shell
sudo -u git -H /home/git/gitlab-shell/bin/check
# Example of success output
# Check GitLab API access: OK
# Check directories and files:
# /home/git/repositories: OK
# /home/git/.ssh/authorized_keys: OK
# Now check gitlab instance
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
doc/update/5.1-to-5.2.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 5.1 to 5.2 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/5.1-to-5.2.md) for the most up to date instructions.*
## Warning
GitLab 5.2 is affected by critical security vulnerabilities CVE-2013-4490 and CVE-2013-4489.
## 0. Backup
It's useful to make a backup just in case things go south:
(With MySQL, this may require granting "LOCK TABLES" privileges to the GitLab user on the database version)
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 1. Stop server
sudo service gitlab stop
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch
sudo -u git -H git checkout 5-2-stable
```
## 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.4.0
```
## 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# MySQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test mysql --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test mysql --deployment
# Both MySQL and PostgreSQL
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
sudo -u git -H bundle exec rake assets:precompile RAILS_ENV=production
```
## 5. Update config files
- Make `/home/git/gitlab/config/gitlab.yml` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/5-2-stable/config/gitlab.yml.example> but with your settings.
- Make `/home/git/gitlab/config/puma.rb` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/5-2-stable/config/puma.rb.example> but with your settings.
## 6. Update Init script
```bash
cd /home/git/gitlab
sudo rm /etc/init.d/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
sudo chmod +x /etc/init.d/gitlab
```
## 7. Create uploads directory
```bash
cd /home/git/gitlab
sudo -u git -H mkdir public/uploads
sudo chmod -R u+rwX public/uploads
```
## 8. Start application
sudo service gitlab start
sudo service nginx restart
## 9. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade complete!
## Things went south? Revert to previous version (5.1)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 5.0 to 5.1](5.0-to-5.1.md), except for the database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
doc/update/5.1-to-5.4.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 5.1 to 5.4 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/5.1-to-5.4.md) for the most up to date instructions.*
Also works starting from 5.2.
## 0. Backup
It's useful to make a backup just in case things go south (with MySQL, this may require granting "LOCK TABLES" privileges to the GitLab user on the database version):
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 1. Stop server
sudo service gitlab stop
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch
sudo -u git -H git checkout 5-4-stable # Latest version of 5-4-stable addresses CVE-2013-4489
```
## 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.7.9 # Addresses multiple critical security vulnerabilities
```
## 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# MySQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test mysql --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test mysql --deployment
# Both MySQL and PostgreSQL
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
sudo -u git -H bundle exec rake assets:precompile RAILS_ENV=production
```
## 5. Update config files
- Make `/home/git/gitlab/config/gitlab.yml` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/5-4-stable/config/gitlab.yml.example> but with your settings.
- Make `/home/git/gitlab/config/puma.rb` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/5-4-stable/config/puma.rb.example> but with your settings.
## 6. Update Init script
```bash
sudo rm /etc/init.d/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
sudo chmod +x /etc/init.d/gitlab
```
## 7. Create uploads directory
```bash
cd /home/git/gitlab
sudo -u git -H mkdir public/uploads
sudo chmod -R u+rwX public/uploads
```
## 8. Start application
sudo service gitlab start
sudo service nginx restart
## 9. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade complete!
## Things went south? Revert to previous version (5.3)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 5.2 to 5.3](5.2-to-5.3.md), except for the database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
doc/update/5.1-to-6.0.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 5.1 to 6.0 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/5.1-to-6.0.md) for the most up to date instructions.*
## Warning
GitLab 6.0 is affected by critical security vulnerabilities CVE-2013-4490 and CVE-2013-4489.
## Deprecations
### Global projects
The root (global) namespace for projects is deprecated.
So you need to move all your global projects under groups or users manually before update or they will be automatically moved to the project owner namespace during the update. When a project is moved all its members will receive an email with instructions how to update their git remote URL. Please make sure you disable sending email when you do a test of the upgrade.
### Teams
We introduce group membership in 6.0 as a replacement for teams.
The old combination of groups and teams was confusing for a lot of people.
And when the members of a team where changed this wasn't reflected in the project permissions.
In GitLab 6.0 you will be able to add members to a group with a permission level for each member.
These group members will have access to the projects in that group.
Any changes to group members will immediately be reflected in the project permissions.
You can even have multiple owners for a group, greatly simplifying administration.
## 0. Backup & prepare for update
It's useful to make a backup just in case things go south:
(With MySQL, this may require granting "LOCK TABLES" privileges to the GitLab user on the database version)
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
The migrations in this update are very sensitive to incomplete or inconsistent data. If you have a long-running GitLab installation and some of the previous upgrades did not work out 100% correct this may bite you now. The following can help you have a more smooth upgrade.
### Find projects with invalid project names
#### MySQL
Login to MySQL:
mysql -u root -p
Find projects with invalid names:
```bash
mysql> use gitlabhq_production;
# find projects with invalid first char, projects must start with letter
mysql> select name from projects where name REGEXP '^[^A-Za-z]';
# find projects with other invalid chars
## names must only contain alphanumeric chars, underscores, spaces, periods, and dashes
mysql> select name from projects where name REGEXP '[^a-zA-Z0-9_ .-]+';
```
If any projects have invalid names try correcting them from the web interface before starting the upgrade.
If correcting them from the web interface fails you can correct them using MySQL:
```bash
# e.g. replace invalid / with allowed _
mysql> update projects set name = REPLACE(name,'/','_');
# repeat for all invalid chars found in project names
```
#### PostgreSQL
Make sure all project names start with a letter and only contain alphanumeric chars, underscores, spaces, periods, and dashes (a-zA-Z0-9_ .-).
### Find other common errors
```
cd /home/git/gitlab
# Start rails console
sudo -u git -H bin/rails console production
# Make sure none of the following rails commands return results
# All project owners should have an owner:
Project.all.select { |project| project.owner.blank? }
# Every user should have a namespace:
User.all.select { |u| u.namespace.blank? }
# Projects in the global namespace should not conflict with projects in the owner namespace:
Project.where(namespace_id: nil).select { |p| Project.where(path: p.path, namespace_id: p.owner.try(:namespace).try(:id)).present? }
```
If any of the above rails commands returned results other than `=> []` try correcting the issue from the web interface.
If you find projects without an owner (first rails command above), correct it. For MySQL setups:
```bash
# get your user id
mysql> select id, name from users order by name;
# set yourself as owner of project
# replace your_user_id with your user id and bad_project_id with the project id from the rails command
mysql> update projects set creator_id=your_user_id where id=bad_project_id;
```
## 1. Stop server
sudo service gitlab stop
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch
sudo -u git -H git checkout 6-0-stable
```
## 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.7.9
```
## 4. Install additional packages
```bash
# For reStructuredText markup language support install required package:
sudo apt-get install python-docutils
```
## 5. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# MySQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test mysql --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test mysql --deployment
# Both MySQL and PostgreSQL
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
sudo -u git -H bundle exec rake migrate_groups RAILS_ENV=production
sudo -u git -H bundle exec rake migrate_global_projects RAILS_ENV=production
sudo -u git -H bundle exec rake migrate_keys RAILS_ENV=production
sudo -u git -H bundle exec rake migrate_inline_notes RAILS_ENV=production
sudo -u git -H bundle exec rake gitlab:satellites:create RAILS_ENV=production
# Clear redis cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
# Clear and precompile assets
sudo -u git -H bundle exec rake assets:clean RAILS_ENV=production
sudo -u git -H bundle exec rake assets:precompile RAILS_ENV=production
#Add dealing with newlines for editor
sudo -u git -H git config --global core.autocrlf input
```
## 6. Update config files
Note: We switched from Puma in GitLab 5.x to unicorn in GitLab 6.0.
- Make `/home/git/gitlab/config/gitlab.yml` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/6-0-stable/config/gitlab.yml.example> but with your settings.
- Make `/home/git/gitlab/config/unicorn.rb` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/6-0-stable/config/unicorn.rb.example> but with your settings.
## 7. Update Init script
```bash
cd /home/git/gitlab
sudo rm /etc/init.d/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
sudo chmod +x /etc/init.d/gitlab
```
## 8. Create uploads directory
```bash
cd /home/git/gitlab
sudo -u git -H mkdir -p public/uploads
sudo chmod -R u+rwX public/uploads
```
## 9. Start application
sudo service gitlab start
sudo service nginx restart
## 10. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade complete!
## Things went south? Revert to previous version (5.1)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 5.0 to 5.1](5.0-to-5.1.md), except for the database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
doc/update/5.2-to-5.3.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 5.2 to 5.3 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/5.2-to-5.3.md) for the most up to date instructions.*
## Warning
GitLab 5.3 is affected by critical security vulnerabilities CVE-2013-4490 and CVE-2013-4489.
## 0. Backup
It's useful to make a backup just in case things go south (with MySQL, this may require granting "LOCK TABLES" privileges to the GitLab user on the database version):
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 1. Stop server
sudo service gitlab stop
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch
sudo -u git -H git checkout 5-3-stable
```
## 3. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# MySQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test mysql --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test mysql --deployment
# Both MySQL and PostgreSQL
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
sudo -u git -H bundle exec rake assets:precompile RAILS_ENV=production
```
## 4. Update config files
- Make `/home/git/gitlab/config/gitlab.yml` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/5-3-stable/config/gitlab.yml.example> but with your settings.
- Make `/home/git/gitlab/config/puma.rb` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/5-3-stable/config/puma.rb.example> but with your settings.
## 5. Update Init script
```bash
sudo rm /etc/init.d/gitlab
sudo curl --location --output /etc/init.d/gitlab https://raw.github.com/gitlabhq/gitlabhq/5-3-stable/lib/support/init.d/gitlab
sudo chmod +x /etc/init.d/gitlab
```
## 6. Start application
sudo service gitlab start
sudo service nginx restart
## 7. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade complete!
## Things went south? Revert to previous version (5.2)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 5.1 to 5.2](5.1-to-5.2.md), except for the database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
doc/update/5.3-to-5.4.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 5.3 to 5.4 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/5.3-to-5.4.md) for the most up to date instructions.*
## 0. Backup
It's useful to make a backup just in case things go south (with MySQL, this may require granting "LOCK TABLES" privileges to the GitLab user on the database version):
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 1. Stop server
sudo service gitlab stop
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch
sudo -u git -H git checkout 5-4-stable # Latest version of 5-4-stable addresses CVE-2013-4489
```
## 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.7.9 # Addresses multiple critical security vulnerabilities
```
## 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# MySQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test mysql --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test mysql --deployment
# Both MySQL and PostgreSQL
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
sudo -u git -H bundle exec rake assets:precompile RAILS_ENV=production
```
## 5. Update config files
- Make `/home/git/gitlab/config/gitlab.yml` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/5-4-stable/config/gitlab.yml.example> but with your settings.
- Make `/home/git/gitlab/config/puma.rb` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/5-4-stable/config/puma.rb.example> but with your settings.
## 6. Update Init script
```bash
sudo rm /etc/init.d/gitlab
sudo curl --location --output /etc/init.d/gitlab https://raw.github.com/gitlabhq/gitlabhq/5-4-stable/lib/support/init.d/gitlab
sudo chmod +x /etc/init.d/gitlab
```
## 7. Start application
sudo service gitlab start
sudo service nginx restart
## 8. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade complete!
## Things went south? Revert to previous version (5.3)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 5.2 to 5.3](5.2-to-5.3.md), except for the database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
doc/update/5.4-to-6.0.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 5.4 to 6.0 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/5.4-to-6.0.md) for the most up to date instructions.*
## Warning
GitLab 6.0 is affected by critical security vulnerabilities CVE-2013-4490 and CVE-2013-4489.
**You need to follow this guide first, before updating past 6.0, as it contains critical migration steps that are only present
in the `6-0-stable` branch**
## Deprecations
### Global projects
The root (global) namespace for projects is deprecated.
So you need to move all your global projects under groups or users manually before update or they will be automatically moved to the project owner namespace during the update. When a project is moved all its members will receive an email with instructions how to update their git remote URL. Please make sure you disable sending email when you do a test of the upgrade.
### Teams
We introduce group membership in 6.0 as a replacement for teams.
The old combination of groups and teams was confusing for a lot of people.
And when the members of a team where changed this wasn't reflected in the project permissions.
In GitLab 6.0 you will be able to add members to a group with a permission level for each member.
These group members will have access to the projects in that group.
Any changes to group members will immediately be reflected in the project permissions.
You can even have multiple owners for a group, greatly simplifying administration.
## 0. Backup
It's useful to make a backup just in case things go south (with MySQL, this may require granting "LOCK TABLES" privileges to the GitLab user on the database version):
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 1. Stop server
sudo service gitlab stop
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch
sudo -u git -H git checkout 6-0-stable
```
## 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.7.9
```
## 4. Install additional packages
```bash
# For reStructuredText markup language support install required package:
sudo apt-get install python-docutils
```
## 5. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# MySQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test mysql --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test mysql --deployment
# Both MySQL and PostgreSQL
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
sudo -u git -H bundle exec rake migrate_groups RAILS_ENV=production
sudo -u git -H bundle exec rake migrate_global_projects RAILS_ENV=production
sudo -u git -H bundle exec rake migrate_keys RAILS_ENV=production
sudo -u git -H bundle exec rake migrate_inline_notes RAILS_ENV=production
sudo -u git -H bundle exec rake gitlab:satellites:create RAILS_ENV=production
# Clear redis cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
# Clear and precompile assets
sudo -u git -H bundle exec rake assets:clean RAILS_ENV=production
sudo -u git -H bundle exec rake assets:precompile RAILS_ENV=production
```
## 6. Update config files
Note: We switched from Puma in GitLab 5.4 to unicorn in GitLab 6.0.
- Make `/home/git/gitlab/config/gitlab.yml` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/gitlab.yml.example> but with your settings.
- Make `/home/git/gitlab/config/unicorn.rb` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/unicorn.rb.example> but with your settings.
## 7. Update Init script
```bash
sudo rm /etc/init.d/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
sudo chmod +x /etc/init.d/gitlab
```
## 8. Start application
sudo service gitlab start
sudo service nginx restart
## 9. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade complete!
## Troubleshooting
The migrations in this update are very sensitive to incomplete or inconsistent data. If you have a long-running GitLab installation and some of the previous upgrades did not work out 100% correct this may bite you now. The following commands can be run in the rails console to look for 'bad' data.
All project owners should have an owner:
```
Project.all.select { |project| project.owner.blank? }
```
Every user should have a namespace:
```
User.all.select { |u| u.namespace.blank? }
```
Projects in the global namespace should not conflict with projects in the owner namespace:
```
Project.where(namespace_id: nil).select { |p| Project.where(path: p.path, namespace_id: p.owner.try(:namespace).try(:id)).present? }
```
doc/update/6.0-to-6.1.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 6.0 to 6.1 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/6.0-to-6.1.md) for the most up to date instructions.*
## Warning
GitLab 6.1 is affected by critical security vulnerabilities CVE-2013-4490 and CVE-2013-4489.
**In 6.1 we remove a lot of deprecated code.**
**You should update to 6.0 before installing 6.1 so all the necessary conversions are run.**
## Deprecations
### Global issue numbers
In 6.1 issue numbers are project specific. This means all issues are renumbered and get a new number in their URL. If you use an old issue number URL and the issue number does not exist yet you are redirected to the new one. This conversion does not trigger if the old number already exists for this project, this is unlikely but will happen with old issues and large projects.
## 0. Backup
It's useful to make a backup just in case things go south (with MySQL, this may require granting "LOCK TABLES" privileges to the GitLab user on the database version):
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 1. Stop server
sudo service gitlab stop
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout 6-1-stable
# For GitLab Enterprise Edition: sudo -u git -H git checkout 6-1-stable-ee
```
## 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.7.9
```
## 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# MySQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test mysql --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test mysql --deployment
# Both MySQL and PostgreSQL
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
sudo -u git -H bundle exec rake migrate_iids RAILS_ENV=production
sudo -u git -H bundle exec rake assets:clean RAILS_ENV=production
sudo -u git -H bundle exec rake assets:precompile RAILS_ENV=production
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
## 5. Update config files
- Make `/home/git/gitlab/config/gitlab.yml` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/6-1-stable/config/gitlab.yml.example> but with your settings.
- Make `/home/git/gitlab/config/unicorn.rb` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/6-1-stable/config/unicorn.rb.example> but with your settings.
## 6. Update Init script
```bash
sudo rm /etc/init.d/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
## 7. Start application
sudo service gitlab start
sudo service nginx restart
## 8. Check application status
Check if GitLab and its environment are configured correctly:
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade complete!
## Things went south? Revert to previous version (6.0)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 5.4 to 6.0](5.4-to-6.0.md), except for the database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
doc/update/6.1-to-6.2.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 6.1 to 6.2 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/6.1-to-6.2.md) for the most up to date instructions.*
**You should update to 6.1 before installing 6.2 so all the necessary conversions are run.**
## 0. Backup
It's useful to make a backup just in case things go south: (With MySQL, this may require granting "LOCK TABLES" privileges to the GitLab user on the database version).
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 1. Stop server
sudo service gitlab stop
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout 6-2-stable # Latest version of 6-2-stable addresses CVE-2013-4489
# For GitLab Enterprise Edition: sudo -u git -H git checkout 6-2-stable-ee
```
## 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.7.9 # Addresses multiple critical security vulnerabilities
```
## 4. Install additional packages
```bash
# Add support for logrotate for better log file handling
sudo apt-get install logrotate
```
## 5. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# MySQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test mysql --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test mysql --deployment
# Both MySQL and PostgreSQL
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
sudo -u git -H bundle exec rake assets:clean RAILS_ENV=production
sudo -u git -H bundle exec rake assets:precompile RAILS_ENV=production
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
## 6. Update config files
TIP: to see what changed in `gitlab.yml.example` in this release use next command:
```
git diff 6-1-stable:config/gitlab.yml.example 6-2-stable:config/gitlab.yml.example
```
- Make `/home/git/gitlab/config/gitlab.yml` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/6-2-stable/config/gitlab.yml.example> but with your settings.
- Make `/home/git/gitlab/config/unicorn.rb` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/6-2-stable/config/unicorn.rb.example> but with your settings.
- Copy rack attack middleware config:
```bash
sudo -u git -H cp config/initializers/rack_attack.rb.example config/initializers/rack_attack.rb
```
- Uncomment `config.middleware.use Rack::Attack` in `/home/git/gitlab/config/application.rb`
- Set up logrotate.
```bash
sudo cp lib/support/logrotate/gitlab /etc/logrotate.d/gitlab
```
## 7. Update Init script
```bash
sudo rm /etc/init.d/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
## 8. Start application
sudo service gitlab start
sudo service nginx restart
## 9. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade complete!
## Things went south? Revert to previous version (6.1)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 6.0 to 6.1](6.0-to-6.1.md), except for the database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
doc/update/6.2-to-6.3.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 6.2 to 6.3 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/6.2-to-6.3.md) for the most up to date instructions.*
**Requires version: 6.1 or 6.2.**
## 0. Backup
It's useful to make a backup just in case things go south: (With MySQL, this may require granting "LOCK TABLES" privileges to the GitLab user on the database version)
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 1. Stop server
sudo service gitlab stop
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout 6-3-stable
# For GitLab Enterprise Edition: sudo -u git -H git checkout 6-3-stable-ee
```
## 3. Update gitlab-shell (and its config)
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.7.9 # Addresses multiple critical security vulnerabilities
```
The gitlab-shell config changed recently, so check for config file changes and make `/home/git/gitlab-shell/config.yml` the same as <https://github.com/gitlabhq/gitlab-shell/blob/master/config.yml.example>
## 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# MySQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test mysql --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test mysql --deployment
# Both MySQL and PostgreSQL
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
## 5. Update config files
TIP: to see what changed in gitlab.yml.example in this release use next command:
```
git diff 6-2-stable:config/gitlab.yml.example 6-3-stable:config/gitlab.yml.example
```
- Make `/home/git/gitlab/config/gitlab.yml` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/6-3-stable/config/gitlab.yml.example> but with your settings.
- Make `/home/git/gitlab/config/unicorn.rb` same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/6-3-stable/config/unicorn.rb.example> but with your settings.
```bash
# Copy rack attack middleware config
cd /home/git/gitlab
sudo -u git -H cp config/initializers/rack_attack.rb.example config/initializers/rack_attack.rb
```
## 6. Update Init script
```bash
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
## 7. Start application
sudo service gitlab start
sudo service nginx restart
## 8. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade complete!
## Things went south? Revert to previous version (6.2)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 6.1 to 6.2](6.1-to-6.2.md), except for the database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
doc/update/6.3-to-6.4.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 6.3 to 6.4 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/6.3-to-6.4.md) for the most up to date instructions.*
## 0. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 1. Stop server
```bash
sudo service gitlab stop
````
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout 6-4-stable
# For GitLab Enterprise Edition: sudo -u git -H git checkout 6-4-stable-ee
```
## 3. Update gitlab-shell (and its config)
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.8.0
```
## 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# MySQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test mysql --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test mysql --deployment
# Both MySQL and PostgreSQL
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
## 5. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
## 6. Check application status
Check if GitLab and its environment are configured correctly:
```bash
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check with:
```bash
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations upgrade complete!
## Things went south? Revert to previous version (6.3)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 6.2 to 6.3](6.2-to-6.3.md), except for the database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
doc/update/6.4-to-6.5.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 6.4 to 6.5 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/6.4-to-6.5.md) for the most up to date instructions.*
## 0. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 1. Stop server
sudo service gitlab stop
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 6-5-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 6-5-stable-ee
```
## 3. Update gitlab-shell (and its config)
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.8.0
```
## 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# MySQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test mysql --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test mysql --deployment
# Both MySQL and PostgreSQL
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
## 5. Start application
sudo service gitlab start
sudo service nginx restart
## 6. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
## Things went south? Revert to previous version (6.4)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 6.3 to 6.4](6.3-to-6.4.md), except for the database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
doc/update/6.5-to-6.6.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 6.5 to 6.6 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/6.5-to-6.6.md) for the most up to date instructions.*
## 0. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 1. Stop server
sudo service gitlab stop
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 6-6-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 6-6-stable-ee
```
## 3. Update gitlab-shell (and its config)
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.8.0
```
## 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# The Modernizr gem was yanked from RubyGems. It is required for GitLab >= 2.8.0
# Edit `Gemfile` and change `gem "modernizr", "2.5.3"` to
# `gem "modernizr-rails", "2.7.1"``
sudo -u git -H vim Gemfile
# MySQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test mysql --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test mysql --deployment
# Both MySQL and PostgreSQL
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
## 5. Start application
sudo service gitlab start
sudo service nginx restart
## 6. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
## Things went south? Revert to previous version (6.5)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 6.4 to 6.5](6.4-to-6.5.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
doc/update/6.6-to-6.7.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 6.6 to 6.7 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/6.6-to-6.7.md) for the most up to date instructions.*
## 0. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 1. Stop server
sudo service gitlab stop
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 6-7-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 6-7-stable-ee
```
## 3. Update gitlab-shell (and its config)
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.9.1
```
## 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test postgres --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL
# Run a bundle install without deployment to generate the new Gemfile
sudo -u git -H bundle install --without development test mysql --no-deployment
# Install libs (with deployment this time)
sudo -u git -H bundle install --without development test mysql --deployment
# Both MySQL and PostgreSQL
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
# Update the logrotate configuration (keep logs for 90 days instead of 52 weeks)
sudo cp lib/support/logrotate/gitlab /etc/logrotate.d/gitlab
# Compress existing .log.1 files because we turned off delaycompress in logrotate
sudo -u git -H gzip /home/git/gitlab/log/*.log.1
sudo -u git -H gzip /home/git/gitlab-shell/gitlab-shell.log.1
# Close access to gitlab-satellites for others
sudo chmod u+rwx,g=rx,o-rwx /home/git/gitlab-satellites
# Add directory for uploads
sudo -u git -H mkdir -p /home/git/gitlab/public/uploads
```
## 5. Start application
sudo service gitlab start
sudo service nginx restart
## 6. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
## Things went south? Revert to previous version (6.6)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 6.5 to 6.6](6.5-to-6.6.md), except for the database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
doc/update/6.7-to-6.8.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 6.7 to 6.8 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/6.7-to-6.8.md) for the most up to date instructions.*
## 0. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 1. Stop server
```bash
sudo service gitlab stop
```
## 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 6-8-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 6-8-stable-ee
```
## 3. Update gitlab-shell (and its config)
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.9.3
```
## 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
# Close access to gitlab-satellites for others
sudo chmod u+rwx,g=rx,o-rwx /home/git/gitlab-satellites
```
## 5. Update config files
### New configuration options for gitlab.yml
There are new configuration options available for gitlab.yml. View them with the command below and apply them to your current gitlab.yml if desired.
```
git diff 6-7-stable:config/gitlab.yml.example 6-8-stable:config/gitlab.yml.example
```
### MySQL? Remove reaping frequency
If you are using MySQL as a database, remove `reaping_frequency` from you database.yml to prevent crashes. [Relevant commit](https://gitlab.com/gitlab-org/gitlab-ce/commit/5163a8fcb9cfd63435560fda00173b76df2ccc93).
### HTTPS? Disable gzip
If you are using HTTPS, disable gzip as in [this commit](https://gitlab.com/gitlab-org/gitlab-ce/commit/563fec734912d81cd7caea6fa8ec2b397fb72a9b) to prevent BREACH attacks.
### Turn on asset compression
To improve performance, enable gzip asset compression as seen [in this commit](https://gitlab.com/gitlab-org/gitlab-ce/commit/8af94ed75505f0253823b9b2d44320fecea5b5fb).
## 6. Start application
sudo service gitlab start
sudo service nginx restart
## 7. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
## Things went south? Revert to previous version (6.7)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 6.6 to 6.7](6.6-to-6.7.md), except for the database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
doc/update/6.8-to-6.9.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 6.8 to 6.9 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/6.8-to-6.9.md) for the most up to date instructions.*
### 0. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 6-9-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 6-9-stable-ee
```
### 3. Update gitlab-shell (and its config)
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.9.4
```
### 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 5. Update config files
#### New configuration options for gitlab.yml
There are new configuration options available for gitlab.yml. View them with the command below and apply them to your current gitlab.yml if desired.
```
git diff 6-8-stable:config/gitlab.yml.example 6-9-stable:config/gitlab.yml.example
```
### 6. Start application
sudo service gitlab start
sudo service nginx restart
### 7. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
## Things went south? Revert to previous version (6.8)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 6.7 to 6.8](6.7-to-6.8.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
doc/update/6.9-to-7.0.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 6.9 to 7.0 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/6.9-to-7.0.md) for the most up to date instructions.*
### 0. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Update Ruby
If you are still using Ruby 1.9.3 or below, you will need to update Ruby.
You can check which version you are running with `ruby -v`.
If you are you running Ruby 2.0.x, you do not need to upgrade ruby, but can consider doing so for performance reasons.
If you are running Ruby 2.1.1 consider upgrading to 2.1.2, because of the high memory usage of Ruby 2.1.1.
Install, update dependencies:
```bash
sudo apt-get install build-essential zlib1g-dev libyaml-dev libssl-dev libgdbm-dev libreadline-dev libncurses5-dev libffi-dev curl
```
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --location --progress ftp://ftp.ruby-lang.org/pub/ruby/2.1/ruby-2.1.2.tar.gz | tar xz
cd ruby-2.1.2
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 3. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-0-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-0-stable-ee
```
### 4. Update gitlab-shell (and its config)
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.9.6
```
### 5. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 6. Update config files
#### New configuration options for gitlab.yml
There are new configuration options available for gitlab.yml. View them with the command below and apply them to your current gitlab.yml if desired.
```
git diff origin/6-9-stable:config/gitlab.yml.example origin/7-0-stable:config/gitlab.yml.example
```
- HTTP setups: Make `/etc/nginx/sites-available/nginx` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/7-0-stable/lib/support/nginx/gitlab> but with your settings.
- HTTPS setups: Make `/etc/nginx/sites-available/nginx-ssl` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/7-0-stable/lib/support/nginx/gitlab-ssl> but with your setting.
### 7. Start application
sudo service gitlab start
sudo service nginx restart
### 8. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
## Things went south? Revert to previous version (6.9)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 6.8 to 6.9](6.8-to-6.9.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
doc/update/6.x-or-7.x-to-7.14.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 6.x or 7.x to 7.14 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/6.x-or-7.x-to-7.14.md) for the most up to date instructions.*
This allows you to upgrade any version of GitLab from 6.0 and up (including 7.0 and up) to 7.14.
## Global issue numbers
As of 6.1 issue numbers are project specific. This means all issues are renumbered and get a new number in their URL. If you use an old issue number URL and the issue number does not exist yet you are redirected to the new one. This conversion does not trigger if the old number already exists for this project, this is unlikely but will happen with old issues and large projects.
## Editable labels
In GitLab 7.2 we replace Issue and Merge Request tags with labels, making it
possible to edit the label text and color. The characters `?`, `&` and `,` are
no longer allowed however so those will be removed from your tags during the
database migrations for GitLab 7.2.
## Stash changes
If you deleted the vendors folder during your original installation, [you will get an error](https://gitlab.com/gitlab-org/gitlab-ce/issues/1494) when you attempt to rebuild the assets in step 7. To avoid this, stash the changes in your GitLab working copy before starting:
git stash
## 0. Stop server
sudo service gitlab stop
## 1. Backup
It's useful to make a backup just in case things go south:
(With MySQL, this may require granting "LOCK TABLES" privileges to the GitLab user on the database version)
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
## 2. Update Ruby
If you are still using Ruby 1.9.3 or below, you will need to update Ruby.
You can check which version you are running with `ruby -v`.
If you are you running Ruby 2.0.x, you do not need to upgrade ruby, but can consider doing so for performance reasons.
If you are running Ruby 2.1.1 consider upgrading to 2.1.6, because of the high memory usage of Ruby 2.1.1.
Install, update dependencies:
```bash
sudo apt-get install build-essential zlib1g-dev libyaml-dev libssl-dev libgdbm-dev libreadline-dev libncurses5-dev libffi-dev curl
```
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --progress https://cache.ruby-lang.org/pub/ruby/2.1/ruby-2.1.6.tar.gz | tar xz
cd ruby-2.1.6
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
## 3. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-14-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-14-stable-ee
```
## 4. Install additional packages
```bash
# Add support for logrotate for better log file handling
sudo apt-get install logrotate
# Install pkg-config and cmake, which is needed for the latest versions of rugged
sudo apt-get install pkg-config cmake
# If you want to use Kerberos with GitLab EE for user authentication, install Kerberos header files
# If you don't know what Kerberos is, you can assume you don't need it.
sudo apt-get install libkrb5-dev
# Install nodejs, javascript runtime required for assets
sudo apt-get install nodejs
```
## 5. Configure Redis to use sockets
# Configure redis to use sockets
sudo cp /etc/redis/redis.conf /etc/redis/redis.conf.orig
# Disable Redis listening on TCP by setting 'port' to 0
sed 's/^port .*/port 0/' /etc/redis/redis.conf.orig | sudo tee /etc/redis/redis.conf
# Enable Redis socket for default Debian / Ubuntu path
echo 'unixsocket /var/run/redis/redis.sock' | sudo tee -a /etc/redis/redis.conf
# Be sure redis group can write to the socket, enable only if supported (>= redis 2.4.0).
sudo sed -i '/# unixsocketperm/ s/^# unixsocketperm.*/unixsocketperm 0775/' /etc/redis/redis.conf
# Activate the changes to redis.conf
sudo service redis-server restart
# Add git to the redis group
sudo usermod -aG redis git
# Configure Redis connection settings
sudo -u git -H cp config/resque.yml.example config/resque.yml
# Change the Redis socket path if you are not using the default Debian / Ubuntu configuration
sudo -u git -H editor config/resque.yml
# Configure gitlab-shell to use Redis sockets
sudo -u git -H sed -i 's|^ # socket.*| socket: /var/run/redis/redis.sock|' /home/git/gitlab-shell/config.yml
## 6. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.6.5
```
## 7. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations from 6.0 to 6.1
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production VERSION=20130909132950
# Enable internal issue IDs (introduced in GitLab 6.1)
sudo -u git -H bundle exec rake migrate_iids RAILS_ENV=production
# Run left database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Close access to gitlab-satellites for others
sudo chmod u+rwx,g+rx,o-rwx /home/git/gitlab-satellites
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
## 8. Update config files
TIP: to see what changed in `gitlab.yml.example` in this release use next command:
```
git diff 6-0-stable:config/gitlab.yml.example 7-14-stable:config/gitlab.yml.example
```
- Make `/home/git/gitlab/config/gitlab.yml` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/7-14-stable/config/gitlab.yml.example> but with your settings.
- Make `/home/git/gitlab/config/unicorn.rb` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/7-14-stable/config/unicorn.rb.example> but with your settings.
- Make `/home/git/gitlab-shell/config.yml` the same as <https://gitlab.com/gitlab-org/gitlab-shell/blob/v2.6.5/config.yml.example> but with your settings.
- Copy rack attack middleware config.
```bash
sudo -u git -H cp config/initializers/rack_attack.rb.example config/initializers/rack_attack.rb
```
- Set up logrotate
```bash
sudo cp lib/support/logrotate/gitlab /etc/logrotate.d/gitlab
```
### Change Nginx settings
- HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/7-14-stable/lib/support/nginx/gitlab> but with your settings.
- HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/7-14-stable/lib/support/nginx/gitlab-ssl> but with your settings.
- A new `location /uploads/` section has been added that needs to have the same content as the existing `location @gitlab` section.
### Check the version of /usr/local/bin/git
If you installed Git from source into /usr/local/bin/git then please [check
your version](7.13-to-7.14.md).
## 9. Start application
sudo service gitlab start
sudo service nginx restart
## 10. Check application status
Check if GitLab and its environment are configured correctly:
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade complete!
## 11. Update OmniAuth configuration
When using Google omniauth login, changes of the Google account required.
Ensure that `Contacts API` and the `Google+ API` are enabled in the [Google Developers Console](https://console.developers.google.com/).
More details can be found at the [integration documentation](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/integration/google.md).
## 12. Optional optimizations for GitLab setups with MySQL databases
Only applies if running MySQL database created with GitLab 6.7 or earlier. If you are not experiencing any issues you may not need the following instructions however following them will bring your database in line with the latest recommended installation configuration and help avoid future issues. Be sure to follow these directions exactly. These directions should be safe for any MySQL instance but to be sure make a current MySQL database backup beforehand.
```
# Stop GitLab
sudo service gitlab stop
# Secure your MySQL installation (added in GitLab 6.2)
sudo mysql_secure_installation
# Login to MySQL
mysql -u root -p
# do not type the 'mysql>', this is part of the prompt
# Convert all tables to use the InnoDB storage engine (added in GitLab 6.8)
SELECT CONCAT('ALTER TABLE gitlabhq_production.', table_name, ' ENGINE=InnoDB;') AS 'Copy & run these SQL statements:' FROM information_schema.tables WHERE table_schema = 'gitlabhq_production' AND `ENGINE` <> 'InnoDB' AND `TABLE_TYPE` = 'BASE TABLE';
# If previous query returned results, copy & run all shown SQL statements
# Convert all tables to correct character set
SET foreign_key_checks = 0;
SELECT CONCAT('ALTER TABLE gitlabhq_production.', table_name, ' CONVERT TO CHARACTER SET utf8 COLLATE utf8_general_ci;') AS 'Copy & run these SQL statements:' FROM information_schema.tables WHERE table_schema = 'gitlabhq_production' AND `TABLE_COLLATION` <> 'utf8_unicode_ci' AND `TABLE_TYPE` = 'BASE TABLE';
# If previous query returned results, copy & run all shown SQL statements
# turn foreign key checks back on
SET foreign_key_checks = 1;
# Find MySQL users
mysql> SELECT user FROM mysql.user WHERE user LIKE '%git%';
# If git user exists and gitlab user does not exist
# you are done with the database cleanup tasks
mysql> \q
# If both users exist skip to Delete gitlab user
# Create new user for GitLab (changed in GitLab 6.4)
# change $password in the command below to a real password you pick
mysql> CREATE USER 'git'@'localhost' IDENTIFIED BY '$password';
# Grant the git user necessary permissions on the database
mysql> GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, DROP, INDEX, ALTER, LOCK TABLES ON `gitlabhq_production`.* TO 'git'@'localhost';
# Delete the old gitlab user
mysql> DELETE FROM mysql.user WHERE user='gitlab';
# Quit the database session
mysql> \q
# Try connecting to the new database with the new user
sudo -u git -H mysql -u git -p -D gitlabhq_production
# Type the password you replaced $password with earlier
# You should now see a 'mysql>' prompt
# Quit the database session
mysql> \q
# Update database configuration details
# See config/database.yml.mysql for latest recommended configuration details
# Remove the reaping_frequency setting line if it exists (removed in GitLab 6.8)
# Set production -> pool: 10 (updated in GitLab 5.3)
# Set production -> username: git
# Set production -> password: the password your replaced $password with earlier
sudo -u git -H editor /home/git/gitlab/config/database.yml
```
## Things went south? Revert to previous version (7.0)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 6.9 to 7.0](6.9-to-7.0.md), except for the database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
## Login issues after upgrade?
If running in HTTPS mode, be sure to read [Can't Verify CSRF token authenticity](https://github.com/gitlabhq/gitlab-public-wiki/wiki/Trouble-Shooting-Guide#cant-verify-csrf-token-authenticitycant-get-past-login-pageredirected-to-login-page)
doc/update/7.0-to-7.1.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.0 to 7.1 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/7.0-to-7.1.md) for the most up to date instructions.*
### 0. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Update Ruby
If you are still using Ruby 1.9.3 or below, you will need to update Ruby.
You can check which version you are running with `ruby -v`.
If you are you running Ruby 2.0.x, you do not need to upgrade ruby, but can consider doing so for performance reasons.
If you are running Ruby 2.1.1 consider upgrading to 2.1.2, because of the high memory usage of Ruby 2.1.1.
Install, update dependencies:
```bash
sudo apt-get install build-essential zlib1g-dev libyaml-dev libssl-dev libgdbm-dev libreadline-dev libncurses5-dev libffi-dev curl
```
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --location --progress ftp://ftp.ruby-lang.org/pub/ruby/2.1/ruby-2.1.2.tar.gz | tar xz
cd ruby-2.1.2
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 3. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-1-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-1-stable-ee
```
### 4. Update gitlab-shell (and its config)
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.9.6
```
### 5. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 6. Update config files
#### New configuration options for gitlab.yml
There are new configuration options available for gitlab.yml. View them with the command below and apply them to your current gitlab.yml if desired.
```
git diff 7-0-stable:config/gitlab.yml.example 7-1-stable:config/gitlab.yml.example
```
### 7. Start application
sudo service gitlab start
sudo service nginx restart
### 8. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
## Things went south? Revert to previous version (7.0)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 6.9 to 7.0](6.9-to-7.0.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-1-stable/config/gitlab.yml.example
doc/update/7.1-to-7.2.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.1 to 7.2 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/7.1-to-7.2.md) for the most up to date instructions.*
## Editable labels
In GitLab 7.2 we replace Issue and Merge Request tags with labels, making it
possible to edit the label text and color. The characters `?`, `&` and `,` are
no longer allowed however so those will be removed from your tags during the
database migrations for GitLab 7.2.
### 0. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-2-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-2-stable-ee
```
### 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v1.9.8
```
### 4. Install new system dependencies
The latest version of the 'rugged' gem requires `pkg-config` and `cmake` to
build its native extensions.
```bash
sudo apt-get install pkg-config cmake
```
### 5. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 6. Update config files
#### New configuration options for `gitlab.yml`
There are new configuration options available for `gitlab.yml`. View them with the command below and apply them to your current `gitlab.yml`.
```
git diff 7-1-stable:config/gitlab.yml.example 7-2-stable:config/gitlab.yml.example
```
- HTTP setups: Make `/etc/nginx/sites-available/nginx` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/7-0-stable/lib/support/nginx/gitlab> but with your settings.
- HTTPS setups: Make `/etc/nginx/sites-available/nginx-ssl` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/7-0-stable/lib/support/nginx/gitlab-ssl> but with your setting.
Update rack attack middleware config
```
sudo -u git -H cp config/initializers/rack_attack.rb.example config/initializers/rack_attack.rb
```
### 7. Start application
sudo service gitlab start
sudo service nginx restart
### 8. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
### 9. Update OmniAuth configuration
When using Google omniauth login, changes of the Google account required.
Ensure that `Contacts API` and the `Google+ API` are enabled in the [Google Developers Console](https://console.developers.google.com/).
More details can be found at the [integration documentation](../integration/google.md).
## Things went south? Revert to previous version (7.1)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.0 to 7.1](7.0-to-7.1.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-2-stable/config/gitlab.yml.example
doc/update/7.10-to-7.11.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.10 to 7.11 This document was moved to [another location](upgrading_from_source.md).
### 0. Stop server
sudo service gitlab stop
### 1. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 2. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-11-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-11-stable-ee
```
### 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.6.3
```
### 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 5. Update config files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
```
git diff origin/7-10-stable:config/gitlab.yml.example origin/7-11-stable:config/gitlab.yml.example
``````
### 6. Start application
sudo service gitlab start
sudo service nginx restart
### 7. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (7.10)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.9 to 7.10](7.9-to-7.10.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-11-stable/config/gitlab.yml.example
doc/update/7.11-to-7.12.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.11 to 7.12 This document was moved to [another location](upgrading_from_source.md).
### 0. Double-check your Git version
**This notice applies only to /usr/local/bin/git**
If you compiled Git from source on your GitLab server then please double-check
that you are using a version that protects against CVE-2014-9390. For six
months after this vulnerability became known the GitLab installation guide
still contained instructions that would install the outdated, 'vulnerable' Git
version 2.1.2.
Run the following command to get your current Git version.
```
/usr/local/bin/git --version
```
If you see 'No such file or directory' then you did not install Git according
to the outdated instructions from the GitLab installation guide and you can go
to the next step 'Stop server' below.
If you see a version string then it should be v1.8.5.6, v1.9.5, v2.0.5, v2.1.4,
v2.2.1 or newer. You can use the [instructions in the GitLab source
installation
guide](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/doc/install/installation.md#1-packages-dependencies)
to install a newer version of Git.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-12-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-12-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.6.3
```
### 5. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 6. Update config files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
```
git diff origin/7-11-stable:config/gitlab.yml.example origin/7-12-stable:config/gitlab.yml.example
``````
### 7. Start application
sudo service gitlab start
sudo service nginx restart
### 8. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (7.11)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.10 to 7.11](7.10-to-7.11.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-12-stable/config/gitlab.yml.example
doc/update/7.12-to-7.13.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.12 to 7.13 This document was moved to [another location](upgrading_from_source.md).
### 0. Double-check your Git version
**This notice applies only to /usr/local/bin/git**
If you compiled Git from source on your GitLab server then please double-check
that you are using a version that protects against CVE-2014-9390. For six
months after this vulnerability became known the GitLab installation guide
still contained instructions that would install the outdated, 'vulnerable' Git
version 2.1.2.
Run the following command to get your current Git version.
```
/usr/local/bin/git --version
```
If you see 'No such file or directory' then you did not install Git according
to the outdated instructions from the GitLab installation guide and you can go
to the next step 'Stop server' below.
If you see a version string then it should be v1.8.5.6, v1.9.5, v2.0.5, v2.1.4,
v2.2.1 or newer. You can use the [instructions in the GitLab source
installation
guide](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/doc/install/installation.md#1-packages-dependencies)
to install a newer version of Git.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-13-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-13-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.6.3
```
### 5. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 6. Update config files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
```
git diff origin/7-12-stable:config/gitlab.yml.example origin/7-13-stable:config/gitlab.yml.example
``````
### 7. Start application
sudo service gitlab start
sudo service nginx restart
### 8. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (7.12)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.11 to 7.12](7.11-to-7.12.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-13-stable/config/gitlab.yml.example
doc/update/7.13-to-7.14.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.13 to 7.14 This document was moved to [another location](upgrading_from_source.md).
### 0. Double-check your Git version
**This notice applies only to /usr/local/bin/git**
If you compiled Git from source on your GitLab server then please double-check
that you are using a version that protects against CVE-2014-9390. For six
months after this vulnerability became known the GitLab installation guide
still contained instructions that would install the outdated, 'vulnerable' Git
version 2.1.2.
Run the following command to get your current Git version.
```
/usr/local/bin/git --version
```
If you see 'No such file or directory' then you did not install Git according
to the outdated instructions from the GitLab installation guide and you can go
to the next step 'Stop server' below.
If you see a version string then it should be v1.8.5.6, v1.9.5, v2.0.5, v2.1.4,
v2.2.1 or newer. You can use the [instructions in the GitLab source
installation
guide](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/doc/install/installation.md#1-packages-dependencies)
to install a newer version of Git.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-14-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-14-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.6.5
```
### 5. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 6. Update config files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
```
git diff origin/7-13-stable:config/gitlab.yml.example origin/7-14-stable:config/gitlab.yml.example
``````
### 7. Start application
sudo service gitlab start
sudo service nginx restart
### 8. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (7.13)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.12 to 7.13](7.12-to-7.13.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-14-stable/config/gitlab.yml.example
doc/update/7.14-to-8.0.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.14 to 8.0 This document was moved to [another location](upgrading_from_source.md).
### 0. Double-check your Git version
**This notice applies only to /usr/local/bin/git**
If you compiled Git from source on your GitLab server then please double-check
that you are using a version that protects against CVE-2014-9390. For six
months after this vulnerability became known the GitLab installation guide
still contained instructions that would install the outdated, 'vulnerable' Git
version 2.1.2.
Run the following command to get your current Git version:
```sh
/usr/local/bin/git --version
```
If you see 'No such file or directory' then you did not install Git according
to the outdated instructions from the GitLab installation guide and you can go
to the next step 'Stop server' below.
If you see a version string then it should be v1.8.5.6, v1.9.5, v2.0.5, v2.1.4,
v2.2.1 or newer. You can use the [instructions in the GitLab source
installation
guide](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/doc/install/installation.md#1-packages-dependencies)
to install a newer version of Git.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-0-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-0-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.6.5
```
### 5. Install gitlab-git-http-server
First we download Go 1.5 and install it into `/usr/local/go`:
```bash
curl --remote-name --progress https://storage.googleapis.com/golang/go1.5.linux-amd64.tar.gz
echo '5817fa4b2252afdb02e11e8b9dc1d9173ef3bd5a go1.5.linux-amd64.tar.gz' | shasum -c - && \
sudo tar -C /usr/local -xzf go1.5.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.5.linux-amd64.tar.gz
```
Now we download `gitlab-git-http-server` and install it in `/home/git/gitlab-git-http-server`:
```bash
cd /home/git
sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-git-http-server.git
cd gitlab-git-http-server
sudo -u git -H git checkout 0.2.14
sudo -u git -H make
```
Make sure your unicorn.rb file contains a 'listen' line for
'127.0.0.1:8080' and that this line is not commented out.
```
cd /home/git/gitlab
grep ^listen config/unicorn.rb
# If there is no 'listen' line for 127.0.0.1:8080, add it:
sudo -u git tee -a config/unicorn.rb <<EOF
listen "127.0.0.1:8080", :tcp_nopush => true
EOF
```
If your Git repositories are in a directory other than `/home/git/repositories`,
you need to tell `gitlab-git-http-server` about it via `/etc/default/gitlab`.
See `lib/support/init.d/gitlab.default.example` for the options.
### 6. Copy secrets
The `secrets.yml` file is used to store keys to encrypt sessions and encrypt secure variables.
When you run migrations make sure to store it someplace safe.
Don't store it in the same place as your database backups,
otherwise your secrets are exposed if one of your backups is compromised.
```
cd /home/git/gitlab
sudo -u git -H cp config/secrets.yml.example config/secrets.yml
sudo -u git -H chmod 0600 config/secrets.yml
```
### 7. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 8. Update config files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/7-14-stable:config/gitlab.yml.example origin/8-0-stable:config/gitlab.yml.example
```
The new options include configuration of GitLab CI that are now being part of GitLab CE and EE.
#### New Nginx configuration
Because of the new `gitlab-git-http-server` you need to update your Nginx
configuration. If you skip this step 'git clone' and 'git push' over HTTP(S)
will stop working.
View changes between the previous recommended Nginx configuration and the
current one:
```sh
# For HTTPS configurations
git diff origin/7-14-stable:lib/support/nginx/gitlab-ssl origin/8-0-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/7-14-stable:lib/support/nginx/gitlab origin/8-0-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates](https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache).
Also note that because Apache does not support upstreams behind Unix sockets you will need to let gitlab-git-http-server listen on a TCP port. You can do this via [/etc/default/gitlab](https://gitlab.com/gitlab-org/gitlab-ce/blob/8-0-stable/lib/support/init.d/gitlab.default.example#L34).
### 9. Migrate GitLab CI to GitLab CE/EE
Now, GitLab CE and EE has CI integrated. However, migrations don't happen automatically and you need to do it manually.
Please follow the following guide [to migrate](../migrate_ci_to_ce/README.md) your GitLab CI instance to GitLab CE/EE.
### 10. Use Redis v2.4.0+
Previous versions of GitLab allowed Redis versions >= 2.0 to be used, but
Sidekiq jobs could fail due to lack of support for the SREM command. GitLab
8.0 now checks that Redis >= 2.4.0 is used. You can check your Redis version
with the following command:
redis-cli info | grep redis_version
### 11. Start application
sudo service gitlab start
sudo service nginx restart
### 12. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (7.14)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.13 to 7.14](7.13-to-7.14.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
## Troubleshooting
### "You appear to have cloned an empty repository."
If you see this message when attempting to clone a repository hosted by GitLab,
this is likely due to an outdated Nginx or Apache configuration, or a missing or
misconfigured `gitlab-git-http-server` instance. Double-check that you correctly
completed [Step 5](#5-install-gitlab-git-http-server) to install the daemon and
[Step 8](#new-nginx-configuration) to reconfigure Nginx.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-0-stable/config/gitlab.yml.example
doc/update/7.2-to-7.3.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.2 to 7.3 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/7.2-to-7.3.md) for the most up to date instructions.*
### 0. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-3-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-3-stable-ee
```
### 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.0.1
```
### 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 5. Configure Redis to use sockets
# Configure redis to use sockets
sudo cp /etc/redis/redis.conf /etc/redis/redis.conf.orig
# Disable Redis listening on TCP by setting 'port' to 0
sed 's/^port .*/port 0/' /etc/redis/redis.conf.orig | sudo tee /etc/redis/redis.conf
# Enable Redis socket for default Debian / Ubuntu path
echo 'unixsocket /var/run/redis/redis.sock' | sudo tee -a /etc/redis/redis.conf
# Be sure redis group can write to the socket, enable only if supported (>= redis 2.4.0).
sudo sed -i '/# unixsocketperm/ s/^# unixsocketperm.*/unixsocketperm 0775/' /etc/redis/redis.conf
# Activate the changes to redis.conf
sudo service redis-server restart
# Add git to the redis group
sudo usermod -aG redis git
# Configure Redis connection settings
sudo -u git -H cp config/resque.yml.example config/resque.yml
# Change the Redis socket path if you are not using the default Debian / Ubuntu configuration
sudo -u git -H editor config/resque.yml
# Configure gitlab-shell to use Redis sockets
sudo -u git -H sed -i 's|^ # socket.*| socket: /var/run/redis/redis.sock|' /home/git/gitlab-shell/config.yml
### 6. Update config files
#### New configuration options for gitlab.yml
There are new configuration options available for gitlab.yml. View them with the command below and apply them to your current gitlab.yml.
```
git diff origin/7-2-stable:config/gitlab.yml.example origin/7-3-stable:config/gitlab.yml.example
```
```
# Use the default Unicorn socket backlog value of 1024
sudo -u git -H sed -i 's/:backlog => 64/:backlog => 1024/' config/unicorn.rb
```
- HTTP setups: Make `/etc/nginx/sites-available/nginx` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/7-3-stable/lib/support/nginx/gitlab> but with your settings.
- HTTPS setups: Make `/etc/nginx/sites-available/nginx-ssl` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/7-3-stable/lib/support/nginx/gitlab-ssl> but with your setting.
### 7. Start application
sudo service gitlab start
sudo service nginx restart
### 8. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
### 9. Update OmniAuth configuration
When using Google omniauth login, changes of the Google account required.
Ensure that `Contacts API` and the `Google+ API` are enabled in the [Google Developers Console](https://console.developers.google.com/).
More details can be found at the [integration documentation](../integration/google.md).
## Things went south? Revert to previous version (7.2)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.1 to 7.2](7.1-to-7.2.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-3-stable/config/gitlab.yml.example
doc/update/7.3-to-7.4.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.3 to 7.4 This document was moved to [another location](upgrading_from_source.md).
*Make sure you view this [upgrade guide from the `master` branch](https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update/7.3-to-7.4.md) for the most up to date instructions.*
### 0. Stop server
sudo service gitlab stop
### 1. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 2. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-4-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-4-stable-ee
```
### 3. Install libs, migrations, etc.
```bash
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 4. Update config files
#### New configuration options for gitlab.yml
There are new configuration options available for gitlab.yml. View them with the command below and apply them to your current gitlab.yml.
```
git diff origin/7-3-stable:config/gitlab.yml.example origin/7-4-stable:config/gitlab.yml.example
```
#### Change timeout for unicorn
```
# set timeout to 60
sudo -u git -H editor config/unicorn.rb
```
#### Change Nginx HTTPS settings
- HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as <https://gitlab.com/gitlab-org/gitlab-ce/blob/7-4-stable/lib/support/nginx/gitlab-ssl> but with your setting.
#### MySQL Databases: Update database.yml config file
- Add `collation: utf8_general_ci` to `config/database.yml` as seen in [config/database.yml.mysql][mysql]:
```
sudo -u git -H editor config/database.yml
```
### 5. Start application
sudo service gitlab start
sudo service nginx restart
### 6. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
### 7. Optional optimizations for GitLab setups with MySQL databases
Only applies if running MySQL database created with GitLab 6.7 or earlier. If you are not experiencing any issues you may not need the following instructions however following them will bring your database in line with the latest recommended installation configuration and help avoid future issues. Be sure to follow these directions exactly. These directions should be safe for any MySQL instance but to be sure make a current MySQL database backup beforehand.
```
# Stop GitLab
sudo service gitlab stop
# Secure your MySQL installation (added in GitLab 6.2)
sudo mysql_secure_installation
# Login to MySQL
mysql -u root -p
# do not type the 'mysql>', this is part of the prompt
# Convert all tables to use the InnoDB storage engine (added in GitLab 6.8)
SELECT CONCAT('ALTER TABLE gitlabhq_production.', table_name, ' ENGINE=InnoDB;') AS 'Copy & run these SQL statements:' FROM information_schema.tables WHERE table_schema = 'gitlabhq_production' AND `ENGINE` <> 'InnoDB' AND `TABLE_TYPE` = 'BASE TABLE';
# If previous query returned results, copy & run all shown SQL statements
# Convert all tables to correct character set
SET foreign_key_checks = 0;
SELECT CONCAT('ALTER TABLE gitlabhq_production.', table_name, ' CONVERT TO CHARACTER SET utf8 COLLATE utf8_general_ci;') AS 'Copy & run these SQL statements:' FROM information_schema.tables WHERE table_schema = 'gitlabhq_production' AND `TABLE_COLLATION` <> 'utf8_unicode_ci' AND `TABLE_TYPE` = 'BASE TABLE';
# If previous query returned results, copy & run all shown SQL statements
# turn foreign key checks back on
SET foreign_key_checks = 1;
# Find MySQL users
mysql> SELECT user FROM mysql.user WHERE user LIKE '%git%';
# If git user exists and gitlab user does not exist
# you are done with the database cleanup tasks
mysql> \q
# If both users exist skip to Delete gitlab user
# Create new user for GitLab (changed in GitLab 6.4)
# change $password in the command below to a real password you pick
mysql> CREATE USER 'git'@'localhost' IDENTIFIED BY '$password';
# Grant the git user necessary permissions on the database
mysql> GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, DROP, INDEX, ALTER, LOCK TABLES ON `gitlabhq_production`.* TO 'git'@'localhost';
# Delete the old gitlab user
mysql> DELETE FROM mysql.user WHERE user='gitlab';
# Quit the database session
mysql> \q
# Try connecting to the new database with the new user
sudo -u git -H mysql -u git -p -D gitlabhq_production
# Type the password you replaced $password with earlier
# You should now see a 'mysql>' prompt
# Quit the database session
mysql> \q
# Update database configuration details
# See config/database.yml.mysql for latest recommended configuration details
# Remove the reaping_frequency setting line if it exists (removed in GitLab 6.8)
# Set production -> pool: 10 (updated in GitLab 5.3)
# Set production -> username: git
# Set production -> password: the password your replaced $password with earlier
sudo -u git -H editor /home/git/gitlab/config/database.yml
# Start GitLab
sudo service gitlab start
sudo service nginx restart
# Run thorough check
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
## Things went south? Revert to previous version (7.3)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.2 to 7.3](7.2-to-7.3.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-4-stable/config/gitlab.yml.example
[mysql]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-4-stable/config/database.yml.mysql
doc/update/7.4-to-7.5.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.4 to 7.5 This document was moved to [another location](upgrading_from_source.md).
### 0. Stop server
sudo service gitlab stop
### 1. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 2. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-5-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-5-stable-ee
```
### 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.2.0
```
### 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 5. Update config files
#### New configuration options for gitlab.yml
There are new configuration options available for gitlab.yml. View them with the command below and apply them to your current gitlab.yml.
```
git diff origin/7-4-stable:config/gitlab.yml.example origin/7-5-stable:config/gitlab.yml.example
```
#### Change Nginx settings
- HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`][nginx] but with your settings.
- HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`][nginx-ssl] but with your setting.
### 6. Start application
sudo service gitlab start
sudo service nginx restart
### 7. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
## Things went south? Revert to previous version (7.4)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.3 to 7.4](7.3-to-7.4.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-5-stable/config/gitlab.yml.example
[nginx]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-5-stable/lib/support/nginx/gitlab
[nginx-ssl]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-5-stable/lib/support/nginx/gitlab-ssl
doc/update/7.5-to-7.6.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.5 to 7.6 This document was moved to [another location](upgrading_from_source.md).
### 0. Stop server
sudo service gitlab stop
### 1. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 2. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-6-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-6-stable-ee
```
### 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.4.0
```
### 4. Install libs, migrations, etc.
```bash
sudo apt-get install libkrb5-dev
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 5. Update config files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
```
git diff origin/7-5-stable:config/gitlab.yml.example origin/7-6-stable:config/gitlab.yml.example
```
#### Change Nginx settings
- HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`][nginx] but with your settings.
- HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`][nginx-ssl] but with your setting.
#### Set up time zone (optional)
Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`][app] (unlikely), unset it.
### 6. Start application
sudo service gitlab start
sudo service nginx restart
### 7. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
## Things went south? Revert to previous version (7.5)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.4 to 7.5](7.4-to-7.5.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-6-stable/config/gitlab.yml.example
[app]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-6-stable/config/application.rb
[nginx]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-6-stable/lib/support/nginx/gitlab
[nginx-ssl]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-6-stable/lib/support/nginx/gitlab-ssl
doc/update/7.6-to-7.7.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.6 to 7.7 This document was moved to [another location](upgrading_from_source.md).
### 0. Stop server
sudo service gitlab stop
### 1. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 2. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-7-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-7-stable-ee
```
### 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.4.2
```
### 4. Install libs, migrations, etc.
```bash
sudo apt-get install libkrb5-dev
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 5. Update config files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
```
git diff origin/7-6-stable:config/gitlab.yml.example origin/7-7-stable:config/gitlab.yml.example
```
#### Change Nginx settings
- HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`][nginx] but with your settings.
- HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`][nginx-ssl] but with your setting.
#### Set up time zone (optional)
Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`][app] (unlikely), unset it.
### 6. Start application
sudo service gitlab start
sudo service nginx restart
### 7. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
### 8. GitHub settings (if applicable)
If you are using GitHub as an OAuth provider for authentication, you should change the callback URL so that it
only contains a root URL (ex. `https://gitlab.example.com/`)
## Things went south? Revert to previous version (7.6)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.5 to 7.6](7.5-to-7.6.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-7-stable/config/gitlab.yml.example
[app]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-7-stable/config/application.rb
[nginx]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-7-stable/lib/support/nginx/gitlab
[nginx-ssl]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-7-stable/lib/support/nginx/gitlab-ssl
doc/update/7.7-to-7.8.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.7 to 7.8 This document was moved to [another location](upgrading_from_source.md).
### 0. Stop server
sudo service gitlab stop
### 1. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 2. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-8-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-8-stable-ee
```
### 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.5.4
```
### 4. Install libs, migrations, etc.
```bash
sudo apt-get install libkrb5-dev
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 5. Update config files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
```
git diff origin/7-7-stable:config/gitlab.yml.example origin/7-8-stable:config/gitlab.yml.example
```
#### Change Nginx settings
- HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`][nginx] but with your settings.
- HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`][nginx-ssl] but with your settings.
- A new `location /uploads/` section has been added that needs to have the same content as the existing `location @gitlab` section.
#### Set up time zone (optional)
Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`][app] (unlikely), unset it.
### 6. Start application
sudo service gitlab start
sudo service nginx restart
### 7. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
### 8. GitHub settings (if applicable)
If you are using GitHub as an OAuth provider for authentication, you should change the callback URL so that it
only contains a root URL (ex. `https://gitlab.example.com/`)
## Things went south? Revert to previous version (7.7)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.6 to 7.7](7.6-to-7.7.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-8-stable/config/gitlab.yml.example
[app]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-8-stable/config/application.rb
[nginx]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-8-stable/lib/support/nginx/gitlab
[nginx-ssl]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-8-stable/lib/support/nginx/gitlab-ssl
doc/update/7.8-to-7.9.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.8 to 7.9 This document was moved to [another location](upgrading_from_source.md).
### 0. Stop server
sudo service gitlab stop
### 1. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 2. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-9-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-9-stable-ee
```
### 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.6.0
```
### 4. Install libs, migrations, etc.
Please refer to the [Node.js setup documentation](https://github.com/joyent/node/wiki/installing-node.js-via-package-manager#debian-and-ubuntu-based-linux-distributions) if you aren't running default GitLab server setup.
```bash
sudo apt-get install nodejs
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 5. Update config files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
```
git diff origin/7-8-stable:config/gitlab.yml.example origin/7-9-stable:config/gitlab.yml.example
```
#### Change Nginx settings
- HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`][nginx] but with your settings.
- HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`][nginx-ssl] but with your settings.
- A new `location /uploads/` section has been added that needs to have the same content as the existing `location @gitlab` section.
#### Set up time zone (optional)
Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`][app] (unlikely), unset it.
### 6. Start application
sudo service gitlab start
sudo service nginx restart
### 7. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
### 8. GitHub settings (if applicable)
If you are using GitHub as an OAuth provider for authentication, you should change the callback URL so that it
only contains a root URL (ex. `https://gitlab.example.com/`)
## Things went south? Revert to previous version (7.8)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.7 to 7.8](7.7-to-7.8.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-9-stable/config/gitlab.yml.example
[app]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-9-stable/config/application.rb
[nginx]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-9-stable/lib/support/nginx/gitlab
[nginx-ssl]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-9-stable/lib/support/nginx/gitlab-ssl
doc/update/7.9-to-7.10.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 7.9 to 7.10 This document was moved to [another location](upgrading_from_source.md).
### 0. Stop server
sudo service gitlab stop
### 1. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 2. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 7-10-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 7-10-stable-ee
```
### 3. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.6.2
```
### 4. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without ... postgres')
sudo -u git -H bundle install --without development test postgres --deployment
# PostgreSQL installations (note: the line below states '--without ... mysql')
sudo -u git -H bundle install --without development test mysql --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
### 5. Update config files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
```
git diff origin/7-9-stable:config/gitlab.yml.example origin/7-10-stable:config/gitlab.yml.example
```
#### Change Nginx settings
- HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`][nginx] but with your settings.
- HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`][nginx-ssl] but with your settings.
- A new `location /uploads/` section has been added that needs to have the same content as the existing `location @gitlab` section.
#### Set up time zone (optional)
Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`][app] (unlikely), unset it.
### 6. Start application
sudo service gitlab start
sudo service nginx restart
### 7. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations upgrade is complete!
### 8. GitHub settings (if applicable)
If you are using GitHub as an OAuth provider for authentication, you should change the callback URL so that it
only contains a root URL (ex. `https://gitlab.example.com/`)
## Things went south? Revert to previous version (7.9)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.8 to 7.9](7.8-to-7.9.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-10-stable/config/gitlab.yml.example
[app]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-10-stable/config/application.rb
[nginx]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-10-stable/lib/support/nginx/gitlab
[nginx-ssl]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-10-stable/lib/support/nginx/gitlab-ssl
doc/update/8.0-to-8.1.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.0 to 8.1 This document was moved to [another location](upgrading_from_source.md).
**NOTE:** GitLab 8.0 introduced several significant changes related to
installation and configuration which *are not duplicated here*. Be sure you're
already running a working version of 8.0 before proceeding with this guide.
### 0. Double-check your Git version
**This notice applies only to /usr/local/bin/git**
If you compiled Git from source on your GitLab server then please double-check
that you are using a version that protects against CVE-2014-9390. For six
months after this vulnerability became known the GitLab installation guide
still contained instructions that would install the outdated, 'vulnerable' Git
version 2.1.2.
Run the following command to get your current Git version:
```sh
/usr/local/bin/git --version
```
If you see 'No such file or directory' then you did not install Git according
to the outdated instructions from the GitLab installation guide and you can go
to the next step 'Stop server' below.
If you see a version string then it should be v1.8.5.6, v1.9.5, v2.0.5, v2.1.4,
v2.2.1 or newer. You can use the [instructions in the GitLab source
installation
guide](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/doc/install/installation.md#1-packages-dependencies)
to install a newer version of Git.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-1-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-1-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.6.5
```
### 5. Update gitlab-git-http-server
```bash
cd /home/git/gitlab-git-http-server
sudo -u git -H git fetch origin
sudo -u git -H git checkout 0.3.0
sudo -u git -H make
```
### 6. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 7. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-0-stable:config/gitlab.yml.example origin/8-1-stable:config/gitlab.yml.example
```
#### Nginx configuration
View changes between the previous recommended Nginx configuration and the
current one:
```sh
# For HTTPS configurations
git diff origin/8-0-stable:lib/support/nginx/gitlab-ssl origin/8-1-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-0-stable:lib/support/nginx/gitlab origin/8-1-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-git-http-server listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-1-stable/lib/support/init.d/gitlab.default.example#L34
### 8. Start application
sudo service gitlab start
sudo service nginx restart
### 9. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.0)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 7.14 to 8.0](7.14-to-8.0.md), except for the database migration
(The backup is already migrated to the previous version)
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
## Troubleshooting
### "You appear to have cloned an empty repository."
See the [7.14 to 8.0 update guide](7.14-to-8.0.md#troubleshooting).
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-1-stable/config/gitlab.yml.example
doc/update/8.1-to-8.2.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.1 to 8.2 This document was moved to [another location](upgrading_from_source.md).
**NOTE:** GitLab 8.0 introduced several significant changes related to
installation and configuration which *are not duplicated here*. Be sure you're
already running a working version of at least 8.0 before proceeding with this
guide.
### 0. Double-check your Git version
**This notice applies only to /usr/local/bin/git**
If you compiled Git from source on your GitLab server then please double-check
that you are using a version that protects against CVE-2014-9390. For six
months after this vulnerability became known the GitLab installation guide
still contained instructions that would install the outdated, 'vulnerable' Git
version 2.1.2.
Run the following command to get your current Git version:
```sh
/usr/local/bin/git --version
```
If you see 'No such file or directory' then you did not install Git according
to the outdated instructions from the GitLab installation guide and you can go
to the next step 'Stop server' below.
If you see a version string then it should be v1.8.5.6, v1.9.5, v2.0.5, v2.1.4,
v2.2.1 or newer. You can use the [instructions in the GitLab source
installation
guide](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/doc/install/installation.md#1-packages-dependencies)
to install a newer version of Git.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-2-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-2-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch
sudo -u git -H git checkout v2.6.8
```
### 5. Replace gitlab-git-http-server with gitlab-workhorse
Install and compile gitlab-workhorse. This requires [Go
1.5](https://golang.org/dl) which should already be on your system
from GitLab 8.1.
```bash
cd /home/git
sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-workhorse.git
cd gitlab-workhorse
sudo -u git -H git checkout 0.4.2
sudo -u git -H make
```
Update the GitLab 'default' file.
```
cd /home/git/gitlab
test -e /etc/default/gitlab && \
sudo sed -i.pre-8.2 's/^\([^=]*\)gitlab_git_http_server/\1gitlab_workhorse/' /etc/default/gitlab
```
Make sure that you also update your **NGINX configuration** to use
the new gitlab-workhorse.socket file.
### 6. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
# Update init.d script
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 7. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-1-stable:config/gitlab.yml.example origin/8-2-stable:config/gitlab.yml.example
```
#### Nginx configuration
View changes between the previous recommended Nginx configuration and the
current one:
```sh
# For HTTPS configurations
git diff origin/8-1-stable:lib/support/nginx/gitlab-ssl origin/8-2-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-1-stable:lib/support/nginx/gitlab origin/8-2-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-2-stable/lib/support/init.d/gitlab.default.example#L34
### 8. Start application
sudo service gitlab start
sudo service nginx restart
### 9. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.1)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.0 to 8.1](8.0-to-8.1.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
## Troubleshooting
### "You appear to have cloned an empty repository."
See the [7.14 to 8.0 update guide](7.14-to-8.0.md#troubleshooting).
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-2-stable/config/gitlab.yml.example
doc/update/8.10-to-8.11.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.10 to 8.11 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
We will continue supporting Ruby < 2.3 for the time being but we recommend you
upgrade to Ruby 2.3 if you're running a source installation, as this is the same
version that ships with our Omnibus package.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.1.tar.gz
echo 'c39b4001f7acb4e334cb60a0f4df72d434bef711 ruby-2.3.1.tar.gz' | shasum --check - && tar xzf ruby-2.3.1.tar.gz
cd ruby-2.3.1
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-11-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-11-stable-ee
```
### 5. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v3.4.0
```
### 6. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all
sudo -u git -H git checkout v0.7.11
sudo -u git -H make
```
### 7. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 8. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-10-stable:config/gitlab.yml.example origin/8-11-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
# For HTTPS configurations
git diff origin/8-10-stable:lib/support/nginx/gitlab-ssl origin/8-11-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-10-stable:lib/support/nginx/gitlab origin/8-11-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-11-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-11-stable/config/initializers/smtp_settings.rb.sample#L13?
#### Init script
Ensure you're still up-to-date with the latest init script changes:
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 9. Start application
sudo service gitlab start
sudo service nginx restart
### 10. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.10)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.9 to 8.10](8.9-to-8.10.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-11-stable/config/gitlab.yml.example
doc/update/8.11-to-8.12.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.11 to 8.12 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
We will continue supporting Ruby < 2.3 for the time being but we recommend you
upgrade to Ruby 2.3 if you're running a source installation, as this is the same
version that ships with our Omnibus package.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.1.tar.gz
echo 'c39b4001f7acb4e334cb60a0f4df72d434bef711 ruby-2.3.1.tar.gz' | shasum --check - && tar xzf ruby-2.3.1.tar.gz
cd ruby-2.3.1
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-12-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-12-stable-ee
```
### 5. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v3.6.1
```
### 6. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all
sudo -u git -H git checkout v0.8.2
sudo -u git -H make
```
### 7. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 8. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-11-stable:config/gitlab.yml.example origin/8-12-stable:config/gitlab.yml.example
```
#### Git configuration
Configure Git to generate packfile bitmaps (introduced in Git 2.0) on
the GitLab server during `git gc`.
```sh
sudo -u git -H git config --global repack.writeBitmaps true
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
# For HTTPS configurations
git diff origin/8-11-stable:lib/support/nginx/gitlab-ssl origin/8-12-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-11-stable:lib/support/nginx/gitlab origin/8-12-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-12-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-12-stable/config/initializers/smtp_settings.rb.sample#L13?
#### Init script
Ensure you're still up-to-date with the latest init script changes:
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 9. Start application
sudo service gitlab start
sudo service nginx restart
### 10. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.11)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.10 to 8.11](8.10-to-8.11.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-12-stable/config/gitlab.yml.example
doc/update/8.12-to-8.13.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.12 to 8.13 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
We will continue supporting Ruby < 2.3 for the time being but we recommend you
upgrade to Ruby 2.3 if you're running a source installation, as this is the same
version that ships with our Omnibus package.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.1.tar.gz
echo 'c39b4001f7acb4e334cb60a0f4df72d434bef711 ruby-2.3.1.tar.gz' | shasum --check - && tar xzf ruby-2.3.1.tar.gz
cd ruby-2.3.1
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-13-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-13-stable-ee
```
### 5. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v3.6.7
```
### 6. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all
sudo -u git -H git checkout v0.8.5
sudo -u git -H make
```
### 7. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 8. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-12-stable:config/gitlab.yml.example origin/8-13-stable:config/gitlab.yml.example
```
#### Git configuration
Configure Git to generate packfile bitmaps (introduced in Git 2.0) on
the GitLab server during `git gc`.
```sh
sudo -u git -H git config --global repack.writeBitmaps true
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
# For HTTPS configurations
git diff origin/8-12-stable:lib/support/nginx/gitlab-ssl origin/8-13-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-12-stable:lib/support/nginx/gitlab origin/8-13-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-13-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-13-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
Ensure you're still up-to-date with the latest init script changes:
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 9. Start application
sudo service gitlab start
sudo service nginx restart
### 10. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.12)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.11 to 8.12](8.11-to-8.12.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-13-stable/config/gitlab.yml.example
doc/update/8.13-to-8.14.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.13 to 8.14 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
We will continue supporting Ruby < 2.3 for the time being but we recommend you
upgrade to Ruby 2.3 if you're running a source installation, as this is the same
version that ships with our Omnibus package.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.1.tar.gz
echo 'c39b4001f7acb4e334cb60a0f4df72d434bef711 ruby-2.3.1.tar.gz' | shasum --check - && tar xzf ruby-2.3.1.tar.gz
cd ruby-2.3.1
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-14-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-14-stable-ee
```
### 5. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v4.1.1
```
### 6. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all
sudo -u git -H git checkout v1.0.1
sudo -u git -H make
```
### 7. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 8. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-13-stable:config/gitlab.yml.example origin/8-14-stable:config/gitlab.yml.example
```
#### Git configuration
Configure Git to generate packfile bitmaps (introduced in Git 2.0) on
the GitLab server during `git gc`.
```sh
sudo -u git -H git config --global repack.writeBitmaps true
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
# For HTTPS configurations
git diff origin/8-13-stable:lib/support/nginx/gitlab-ssl origin/8-14-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-13-stable:lib/support/nginx/gitlab origin/8-14-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-14-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-14-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
Ensure you're still up-to-date with the latest init script changes:
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 9. Start application
sudo service gitlab start
sudo service nginx restart
### 10. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.13)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.12 to 8.13](8.12-to-8.13.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-14-stable/config/gitlab.yml.example
doc/update/8.14-to-8.15.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.14 to 8.15 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
We will continue supporting Ruby < 2.3 for the time being but we recommend you
upgrade to Ruby 2.3 if you're running a source installation, as this is the same
version that ships with our Omnibus package.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.1.tar.gz
echo 'c39b4001f7acb4e334cb60a0f4df72d434bef711 ruby-2.3.1.tar.gz' | shasum --check - && tar xzf ruby-2.3.1.tar.gz
cd ruby-2.3.1
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 8-15-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 8-15-stable-ee
```
### 5. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 6. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake "gitlab:workhorse:install[/home/git/gitlab-workhorse]" RAILS_ENV=production
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v4.1.1
```
### 8. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/8-14-stable:config/gitlab.yml.example origin/8-15-stable:config/gitlab.yml.example
```
#### Git configuration
Configure Git to generate packfile bitmaps (introduced in Git 2.0) on
the GitLab server during `git gc`.
```sh
cd /home/git/gitlab
sudo -u git -H git config --global repack.writeBitmaps true
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/8-14-stable:lib/support/nginx/gitlab-ssl origin/8-15-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-14-stable:lib/support/nginx/gitlab origin/8-15-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-15-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-15-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 9. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 10. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.14)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.13 to 8.14](8.13-to-8.14.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-15-stable/config/gitlab.yml.example
doc/update/8.15-to-8.16.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.15 to 8.16 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
We will continue supporting Ruby < 2.3 for the time being but we recommend you
upgrade to Ruby 2.3 if you're running a source installation, as this is the same
version that ships with our Omnibus package.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.3.tar.gz
echo '1014ee699071aa2ddd501907d18cbe15399c997d ruby-2.3.3.tar.gz' | shasum -c - && tar xzf ruby-2.3.3.tar.gz
cd ruby-2.3.3
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 8-16-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 8-16-stable-ee
```
### 5. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 6. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake "gitlab:workhorse:install[/home/git/gitlab-workhorse]" RAILS_ENV=production
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v4.1.1
```
### 8. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/8-15-stable:config/gitlab.yml.example origin/8-16-stable:config/gitlab.yml.example
```
#### Git configuration
Configure Git to generate packfile bitmaps (introduced in Git 2.0) on
the GitLab server during `git gc`.
```sh
cd /home/git/gitlab
sudo -u git -H git config --global repack.writeBitmaps true
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/8-15-stable:lib/support/nginx/gitlab-ssl origin/8-16-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-15-stable:lib/support/nginx/gitlab origin/8-16-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-16-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-16-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 9. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 10. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.15)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.14 to 8.15](8.14-to-8.15.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-16-stable/config/gitlab.yml.example
doc/update/8.16-to-8.17.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.16 to 8.17 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
We will continue supporting Ruby < 2.3 for the time being but we recommend you
upgrade to Ruby 2.3 if you're running a source installation, as this is the same
version that ships with our Omnibus package.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.3.tar.gz
echo '1014ee699071aa2ddd501907d18cbe15399c997d ruby-2.3.3.tar.gz' | shasum -c - && tar xzf ruby-2.3.3.tar.gz
cd ruby-2.3.3
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab now runs [webpack](http://webpack.js.org) to compile frontend assets and
it has a minimum requirement of node v4.3.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v4.3.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
### 5. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 8-17-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 8-17-stable-ee
```
### 6. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Install/update frontend asset dependencies
sudo -u git -H npm install --production
# Clean up assets and cache
sudo -u git -H bundle exec rake gitlab:assets:clean gitlab:assets:compile cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 7. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake "gitlab:workhorse:install[/home/git/gitlab-workhorse]" RAILS_ENV=production
```
### 8. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v4.1.1
```
### 9. Update configuration files
#### New configuration options for `gitlab.yml`
There might be new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/8-16-stable:config/gitlab.yml.example origin/8-17-stable:config/gitlab.yml.example
```
#### Git configuration
Configure Git to generate packfile bitmaps (introduced in Git 2.0) on
the GitLab server during `git gc`.
```sh
cd /home/git/gitlab
sudo -u git -H git config --global repack.writeBitmaps true
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/8-16-stable:lib/support/nginx/gitlab-ssl origin/8-17-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-16-stable:lib/support/nginx/gitlab origin/8-17-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-17-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-17-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example].
You need to update this file if you want to [enable GitLab Pages][pages-admin].
View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/8-16-stable:lib/support/init.d/gitlab.default.example origin/8-17-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 10. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 11. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.16)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.15 to 8.16](8.15-to-8.16.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-17-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-17-stable/lib/support/init.d/gitlab.default.example
[pages-admin]: ../administration/pages/source.md
doc/update/8.17-to-9.0.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.17 to 9.0 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 only supports Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.3.tar.gz
echo '1014ee699071aa2ddd501907d18cbe15399c997d ruby-2.3.3.tar.gz' | shasum -c - && tar xzf ruby-2.3.3.tar.gz
cd ruby-2.3.3
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab now runs [webpack](http://webpack.js.org) to compile frontend assets and
it has a minimum requirement of node v4.3.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v4.3.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
Since 8.17, GitLab requires the use of yarn `>= v0.17.0` to manage
JavaScript dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 9-0-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 9-0-stable-ee
```
### 6. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
```
### 7. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1. GitLab-Workhorse uses [GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 8. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/8-17-stable:config/gitlab.yml.example origin/9-0-stable:config/gitlab.yml.example
```
#### Configuration changes for repository storages
This version introduces a new configuration structure for repository storages.
Update your current configuration as follows, replacing with your storages names and paths:
**For installations from source**
1. Update your `gitlab.yml`, from
```yaml
repositories:
storages: # You must have at least a 'default' storage path.
default: /home/git/repositories
nfs: /mnt/nfs/repositories
cephfs: /mnt/cephfs/repositories
```
to
```yaml
repositories:
storages: # You must have at least a 'default' storage path.
default:
path: /home/git/repositories
nfs:
path: /mnt/nfs/repositories
cephfs:
path: /mnt/cephfs/repositories
```
**For Omnibus installations**
1. Update your `/etc/gitlab/gitlab.rb`, from
```ruby
git_data_dirs({
"default" => "/var/opt/gitlab/git-data",
"nfs" => "/mnt/nfs/git-data",
"cephfs" => "/mnt/cephfs/git-data"
})
```
to
```ruby
git_data_dirs({
"default" => { "path" => "/var/opt/gitlab/git-data" },
"nfs" => { "path" => "/mnt/nfs/git-data" },
"cephfs" => { "path" => "/mnt/cephfs/git-data" }
})
```
#### Git configuration
Configure Git to generate packfile bitmaps (introduced in Git 2.0) on
the GitLab server during `git gc`.
```sh
cd /home/git/gitlab
sudo -u git -H git config --global repack.writeBitmaps true
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/8-17-stable:lib/support/nginx/gitlab-ssl origin/9-0-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-17-stable:lib/support/nginx/gitlab origin/9-0-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-0-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-0-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/8-17-stable:lib/support/init.d/gitlab.default.example origin/9-0-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 9. Install libs, migrations, etc.
GitLab 9.0.11 [introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/24570)
a dependency on the `re2` regular expression library. To install this dependency:
```bash
sudo apt-get install libre2-dev
```
Ubuntu 14.04 (Trusty Tahr) doesn't have the `libre2-dev` package available, but
you can [install re2 manually](https://github.com/google/re2/wiki/Install).
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 10. Optional: install Gitaly
Gitaly is still an optional component of GitLab. If you want to save time
during your 9.0 upgrade **you can skip this step**.
If you do want to set up Gitaly in GitLab 9.0 then follow [Gitaly section of the installation
guide](../install/installation.md#install-gitaly).
### 11. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 12. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.17)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.16 to 8.17](8.16-to-8.17.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-0-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-0-stable/lib/support/init.d/gitlab.default.example
doc/update/8.2-to-8.3.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.2 to 8.3 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
**NOTE:** GitLab 8.0 introduced several significant changes related to
installation and configuration which *are not duplicated here*. Be sure you're
already running a working version of at least 8.0 before proceeding with this
guide.
### 0. Double-check your Git version
**This notice applies only to /usr/local/bin/git**
If you compiled Git from source on your GitLab server then please double-check
that you are using a version that protects against CVE-2014-9390. For six
months after this vulnerability became known the GitLab installation guide
still contained instructions that would install the outdated, 'vulnerable' Git
version 2.1.2.
Run the following command to get your current Git version:
```sh
/usr/local/bin/git --version
```
If you see 'No such file or directory' then you did not install Git according
to the outdated instructions from the GitLab installation guide and you can go
to the next step 'Stop server' below.
If you see a version string then it should be v1.8.5.6, v1.9.5, v2.0.5, v2.1.4,
v2.2.1 or newer. You can use the [instructions in the GitLab source installation
guide](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/doc/install/installation.md#1-packages-dependencies)
to install a newer version of Git.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-3-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-3-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all
sudo -u git -H git checkout v2.6.9
```
### 5. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires [Go 1.5](https://golang.org/dl)
which should already be on your system from GitLab 8.1.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all
sudo -u git -H git checkout 0.5.4
sudo -u git -H make
```
### 6. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 7. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-2-stable:config/gitlab.yml.example origin/8-3-stable:config/gitlab.yml.example
```
#### GitLab default file
The value of the `gitlab_workhorse_options` variable should be updated within the default gitlab file (`/etc/default/gitlab`) according to the following diff:
```sh
git diff origin/8-2-stable:lib/support/init.d/gitlab.default.example origin/8-3-stable:lib/support/init.d/gitlab.default.example
```
#### Nginx configuration
GitLab 8.3 introduces major changes in the NGINX configuration.
Because all HTTP requests pass through gitlab-workhorse now a lot of
directives need to be removed from NGINX. During future upgrades there
should be much less changes in the NGINX configuration because of
this.
View changes between the previous recommended Nginx configuration and the
current one:
```sh
# For HTTPS configurations
git diff origin/8-2-stable:lib/support/nginx/gitlab-ssl origin/8-3-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-2-stable:lib/support/nginx/gitlab origin/8-3-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-3-stable/lib/support/init.d/gitlab.default.example#L34
#### Init script
We updated the init script for GitLab in order to pass new
configuration options to gitlab-workhorse. We let gitlab-workhorse
connect to the Rails application via a Unix domain socket and we tell
it where the 'public' directory of GitLab is.
```
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 8. Use Redis v2.8.0+
Previous versions of GitLab allowed Redis versions >= 2.0 to be used, but
GitLab 8.3 uses Sidekiq 4.0, which requires Redis 2.8. You can check your Redis version
with the following command:
redis-cli info | grep redis_version
If you need to upgrade, see the [installation guide for Redis](https://gitlab.com/gitlab-org/gitlab-ce/blob/8-3-stable/doc/install/installation.md#6-redis).
### 9. Start application
sudo service gitlab start
sudo service nginx restart
### 10. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.2)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.1 to 8.2](8.1-to-8.2.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
## Troubleshooting
### "You appear to have cloned an empty repository."
See the [7.14 to 8.0 update guide](7.14-to-8.0.md#troubleshooting).
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-3-stable/config/gitlab.yml.example
doc/update/8.3-to-8.4.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.3 to 8.4 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-4-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-4-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all
sudo -u git -H git checkout v2.6.10
```
### 5. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires [Go 1.5](https://golang.org/dl)
which should already be on your system from GitLab 8.1.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all
sudo -u git -H git checkout 0.6.2
sudo -u git -H make
```
### 6. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 7. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-3-stable:config/gitlab.yml.example origin/8-4-stable:config/gitlab.yml.example
```
#### Init script
We updated the init script for GitLab in order to set a specific PATH for gitlab-workhorse.
```
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 8. Start application
sudo service gitlab start
sudo service nginx restart
### 9. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.3)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.2 to 8.3](8.2-to-8.3.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-4-stable/config/gitlab.yml.example
doc/update/8.4-to-8.5.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.4 to 8.5 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-5-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-5-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all
sudo -u git -H git checkout v2.6.10
```
### 5. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all
sudo -u git -H git checkout 0.6.4
sudo -u git -H make
```
### 6. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 7. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-4-stable:config/gitlab.yml.example origin/8-5-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
# For HTTPS configurations
git diff origin/8-4-stable:lib/support/nginx/gitlab-ssl origin/8-5-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-4-stable:lib/support/nginx/gitlab origin/8-5-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-5-stable/lib/support/init.d/gitlab.default.example#L37
#### Init script
Ensure you're still up-to-date with the latest init script changes:
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 8. Start application
sudo service gitlab start
sudo service nginx restart
### 9. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.4)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.3 to 8.4](8.3-to-8.4.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-5-stable/config/gitlab.yml.example
doc/update/8.5-to-8.6.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.5 to 8.6 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-6-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-6-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all
sudo -u git -H git checkout v2.6.12
```
### 5. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all
sudo -u git -H git checkout v0.7.1
sudo -u git -H make
```
### 6. Updates for PostgreSQL Users
Starting with 8.6 users using GitLab in combination with PostgreSQL are required
to have the `pg_trgm` extension enabled for all GitLab databases. If you're
using GitLab's Omnibus packages there's nothing you'll need to do manually as
this extension is enabled automatically. Users who install GitLab without using
Omnibus (e.g. by building from source) have to enable this extension manually.
To enable this extension run the following SQL command as a PostgreSQL super
user for _every_ GitLab database:
```sql
CREATE EXTENSION IF NOT EXISTS pg_trgm;
```
Certain operating systems might require the installation of extra packages for
this extension to be available. For example, users using Ubuntu will have to
install the `postgresql-contrib` package in order for this extension to be
available.
### 7. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 8. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-5-stable:config/gitlab.yml.example origin/8-6-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
# For HTTPS configurations
git diff origin/8-5-stable:lib/support/nginx/gitlab-ssl origin/8-6-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-5-stable:lib/support/nginx/gitlab origin/8-6-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-6-stable/lib/support/init.d/gitlab.default.example#L37
#### Init script
Ensure you're still up-to-date with the latest init script changes:
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 9. Start application
sudo service gitlab start
sudo service nginx restart
### 10. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.5)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.4 to 8.5](8.4-to-8.5.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-6-stable/config/gitlab.yml.example
doc/update/8.6-to-8.7.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.6 to 8.7 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-7-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-7-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --tags
sudo -u git -H git checkout v2.7.2
```
### 5. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all
sudo -u git -H git checkout v0.7.1
sudo -u git -H make
```
### 6. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 7. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-6-stable:config/gitlab.yml.example origin/8-7-stable:config/gitlab.yml.example
```
#### Git configuration
Disable `git gc --auto` because GitLab runs `git gc` for us already.
```sh
sudo -u git -H git config --global gc.auto 0
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
# For HTTPS configurations
git diff origin/8-6-stable:lib/support/nginx/gitlab-ssl origin/8-7-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-6-stable:lib/support/nginx/gitlab origin/8-7-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-7-stable/lib/support/init.d/gitlab.default.example#L37
#### Init script
Ensure you're still up-to-date with the latest init script changes:
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 8. Start application
sudo service gitlab start
sudo service nginx restart
### 9. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.6)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.5 to 8.6](8.5-to-8.6.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-7-stable/config/gitlab.yml.example
doc/update/8.7-to-8.8.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.7 to 8.8 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-8-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-8-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v2.7.2
```
### 5. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all
sudo -u git -H git checkout v0.7.1
sudo -u git -H make
```
### 6. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 7. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-7-stable:config/gitlab.yml.example origin/8-8-stable:config/gitlab.yml.example
```
#### Git configuration
Disable `git gc --auto` because GitLab runs `git gc` for us already.
```sh
sudo -u git -H git config --global gc.auto 0
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
# For HTTPS configurations
git diff origin/8-7-stable:lib/support/nginx/gitlab-ssl origin/8-8-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-7-stable:lib/support/nginx/gitlab origin/8-8-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-8-stable/lib/support/init.d/gitlab.default.example#L37
#### Init script
Ensure you're still up-to-date with the latest init script changes:
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 8. Start application
sudo service gitlab start
sudo service nginx restart
### 9. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.7)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.6 to 8.7](8.6-to-8.7.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-8-stable/config/gitlab.yml.example
doc/update/8.8-to-8.9.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.8 to 8.9 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-9-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-9-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v3.0.0
```
### 5. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all
sudo -u git -H git checkout v0.7.5
sudo -u git -H make
```
### 6. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
# Login to MySQL
mysql -u root -p
# Grant the GitLab user the REFERENCES permission on the database
GRANT REFERENCES ON `gitlabhq_production`.* TO 'git'@'localhost';
# Quit the database session
mysql> \q
```
### 7. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 8. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-8-stable:config/gitlab.yml.example origin/8-9-stable:config/gitlab.yml.example
```
#### Git configuration
Disable `git gc --auto` because GitLab runs `git gc` for us already.
```sh
sudo -u git -H git config --global gc.auto 0
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
# For HTTPS configurations
git diff origin/8-8-stable:lib/support/nginx/gitlab-ssl origin/8-9-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-8-stable:lib/support/nginx/gitlab origin/8-9-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-9-stable/lib/support/init.d/gitlab.default.example#L37
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/v8.9.0/config/initializers/smtp_settings.rb.sample#L13
#### Init script
Ensure you're still up-to-date with the latest init script changes:
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 9. Start application
sudo service gitlab start
sudo service nginx restart
### 10. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.8)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.7 to 8.8](8.7-to-8.8.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-9-stable/config/gitlab.yml.example
doc/update/8.9-to-8.10.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 8.9 to 8.10 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
sudo service gitlab stop
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Get latest code
```bash
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
sudo -u git -H git checkout 8-10-stable
```
OR
For GitLab Enterprise Edition:
```bash
sudo -u git -H git checkout 8-10-stable-ee
```
### 4. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v3.2.1
```
### 5. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all
sudo -u git -H git checkout v0.7.8
sudo -u git -H make
```
### 6. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
# Login to MySQL
mysql -u root -p
# Grant the GitLab user the REFERENCES permission on the database
GRANT REFERENCES ON `gitlabhq_production`.* TO 'git'@'localhost';
# Quit the database session
mysql> \q
```
### 7. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 8. Update configuration files
#### New configuration options for `gitlab.yml`
There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
git diff origin/8-9-stable:config/gitlab.yml.example origin/8-10-stable:config/gitlab.yml.example
```
#### Git configuration
Disable `git gc --auto` because GitLab runs `git gc` for us already.
```sh
sudo -u git -H git config --global gc.auto 0
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
# For HTTPS configurations
git diff origin/8-9-stable:lib/support/nginx/gitlab-ssl origin/8-10-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/8-9-stable:lib/support/nginx/gitlab origin/8-10-stable:lib/support/nginx/gitlab
```
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-10-stable/lib/support/init.d/gitlab.default.example#L37
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/v8.9.0/config/initializers/smtp_settings.rb.sample#L13
#### Init script
Ensure you're still up-to-date with the latest init script changes:
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
### 9. Start application
sudo service gitlab start
sudo service nginx restart
### 10. Check application status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (8.9)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.8 to 8.9](8.8-to-8.9.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-10-stable/config/gitlab.yml.example
doc/update/9.0-to-9.1.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 9.0 to 9.1 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.3.tar.gz
echo '1014ee699071aa2ddd501907d18cbe15399c997d ruby-2.3.3.tar.gz' | shasum -c - && tar xzf ruby-2.3.3.tar.gz
cd ruby-2.3.3
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab now runs [webpack](http://webpack.js.org) to compile frontend assets and
it has a minimum requirement of node v4.3.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v4.3.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
Since 8.17, GitLab requires the use of yarn `>= v0.17.0` to manage
JavaScript dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 9-1-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 9-1-stable-ee
```
### 6. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
```
### 7. Update gitlab-workhorse
Install and compile gitlab-workhorse. This requires
[Go 1.5](https://golang.org/dl) which should already be on your system from
GitLab 8.1. GitLab-Workhorse uses [GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 8. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/9-0-stable:config/gitlab.yml.example origin/9-1-stable:config/gitlab.yml.example
```
#### Configuration changes for repository storages
This version introduces a new configuration structure for repository storages.
Update your current configuration as follows, replacing with your storages names and paths:
**For installations from source**
1. Update your `gitlab.yml`, from
```yaml
repositories:
storages: # You must have at least a 'default' storage path.
default: /home/git/repositories
nfs: /mnt/nfs/repositories
cephfs: /mnt/cephfs/repositories
```
to
```yaml
repositories:
storages: # You must have at least a 'default' storage path.
default:
path: /home/git/repositories
nfs:
path: /mnt/nfs/repositories
cephfs:
path: /mnt/cephfs/repositories
```
**For Omnibus installations**
1. Update your `/etc/gitlab/gitlab.rb`, from
```ruby
git_data_dirs({
"default" => "/var/opt/gitlab/git-data",
"nfs" => "/mnt/nfs/git-data",
"cephfs" => "/mnt/cephfs/git-data"
})
```
to
```ruby
git_data_dirs({
"default" => { "path" => "/var/opt/gitlab/git-data" },
"nfs" => { "path" => "/mnt/nfs/git-data" },
"cephfs" => { "path" => "/mnt/cephfs/git-data" }
})
```
#### Git configuration
Configure Git to generate packfile bitmaps (introduced in Git 2.0) on
the GitLab server during `git gc`.
```sh
cd /home/git/gitlab
sudo -u git -H git config --global repack.writeBitmaps true
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/9-0-stable:lib/support/nginx/gitlab-ssl origin/9-1-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/9-0-stable:lib/support/nginx/gitlab origin/9-1-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-1-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-1-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/9-0-stable:lib/support/init.d/gitlab.default.example origin/9-1-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 9. Install libs, migrations, etc.
GitLab 9.1.8 [introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/24570)
a dependency on the `re2` regular expression library. To install this dependency:
```bash
sudo apt-get install libre2-dev
```
Ubuntu 14.04 (Trusty Tahr) doesn't have the `libre2-dev` package available, but
you can [install re2 manually](https://github.com/google/re2/wiki/Install).
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 10. Optional: install Gitaly
Gitaly is still an optional component of GitLab. If you want to save time
during your 9.1 upgrade **you can skip this step**.
If you have not yet set up Gitaly then follow [Gitaly section of the installation
guide](../install/installation.md#install-gitaly).
If you installed Gitaly in GitLab 9.0 you need to make some changes in
gitlab.yml, and create a new config.toml file.
#### Gitaly gitlab.yml changes
Look for `socket_path:` the `gitaly:` section. Its value is usually
`/home/git/gitlab/tmp/sockets/private/gitaly.socket`. Note what socket
path your gitlab.yml is using. Now go to the `repositories:` section,
and for each entry under `storages:`, add a `gitaly_address:` based on
the socket path, but with `unix:` in front.
```yaml
repositories:
storages:
default:
path: /home/git/repositories
gitaly_address: unix:/home/git/gitlab/tmp/sockets/private/gitaly.socket
other_storage:
path: /home/git/other-repositories
gitaly_address: unix:/home/git/gitlab/tmp/sockets/private/gitaly.socket
```
Each entry under `storages:` should use the same `gitaly_address`.
#### Compile Gitaly
This step will also create `config.toml.example` which you need below.
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
#### Gitaly config.toml
In GitLab 9.1 we are replacing environment variables in Gitaly with a
TOML configuration file.
```shell
cd /home/git/gitaly
sudo mv env env.old
sudo -u git cp config.toml.example config.toml
# If you are using custom repository storage paths they need to be in config.toml
sudo -u git -H editor config.toml
```
### 11. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 12. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (9.0)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 8.17 to 9.0](8.17-to-9.0.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-1-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-1-stable/lib/support/init.d/gitlab.default.example
doc/update/9.1-to-9.2.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 9.1 to 9.2 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.3.tar.gz
echo '1014ee699071aa2ddd501907d18cbe15399c997d ruby-2.3.3.tar.gz' | shasum -c - && tar xzf ruby-2.3.3.tar.gz
cd ruby-2.3.3
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab now runs [webpack](http://webpack.js.org) to compile frontend assets and
it has a minimum requirement of node v4.3.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v4.3.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
Since 8.17, GitLab requires the use of yarn `>= v0.17.0` to manage
JavaScript dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 9.2 and higher only supports Go 1.8.3 and dropped support for Go
1.5.x through 1.7.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://storage.googleapis.com/golang/go1.8.3.linux-amd64.tar.gz
echo '1862f4c3d3907e59b04a757cfda0ea7aa9ef39274af99a784f5be843c80c6772 go1.8.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.8.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.8.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 9-2-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 9-2-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/9-1-stable:config/gitlab.yml.example origin/9-2-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/9-1-stable:lib/support/nginx/gitlab-ssl origin/9-2-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/9-1-stable:lib/support/nginx/gitlab origin/9-2-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-2-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-2-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/9-1-stable:lib/support/init.d/gitlab.default.example origin/9-2-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 10. Install libs, migrations, etc.
GitLab 9.2.8 [introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/24570)
a dependency on the `re2` regular expression library. To install this dependency:
```bash
sudo apt-get install libre2-dev
```
Ubuntu 14.04 (Trusty Tahr) doesn't have the `libre2-dev` package available, but
you can [install re2 manually](https://github.com/google/re2/wiki/Install).
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:pack RAILS_ENV=production
sudo -u git -H bundle exec rake gettext:po_to_json RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 11. Optional: install Gitaly
Gitaly is still an optional component of GitLab. If you want to save time
during your 9.2 upgrade **you can skip this step**.
If you have not yet set up Gitaly then follow [Gitaly section of the installation
guide](../install/installation.md#install-gitaly).
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 12. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 13. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (9.1)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 9.0 to 9.1](9.0-to-9.1.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-2-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-2-stable/lib/support/init.d/gitlab.default.example
doc/update/9.2-to-9.3.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 9.2 to 9.3 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.3.tar.gz
echo '1014ee699071aa2ddd501907d18cbe15399c997d ruby-2.3.3.tar.gz' | shasum -c - && tar xzf ruby-2.3.3.tar.gz
cd ruby-2.3.3
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab now runs [webpack](http://webpack.js.org) to compile frontend assets and
it has a minimum requirement of node v4.3.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v4.3.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
Since 8.17, GitLab requires the use of yarn `>= v0.17.0` to manage
JavaScript dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 9.2 and higher only supports Go 1.8.3 and dropped support for Go
1.5.x through 1.7.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://storage.googleapis.com/golang/go1.8.3.linux-amd64.tar.gz
echo '1862f4c3d3907e59b04a757cfda0ea7aa9ef39274af99a784f5be843c80c6772 go1.8.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.8.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.8.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 9-3-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 9-3-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
If you have not yet set up Gitaly then follow [Gitaly section of the installation
guide](../install/installation.md#install-gitaly).
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 11. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/9-2-stable:config/gitlab.yml.example origin/9-3-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/9-2-stable:lib/support/nginx/gitlab-ssl origin/9-3-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/9-2-stable:lib/support/nginx/gitlab origin/9-3-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-3-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-3-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/9-2-stable:lib/support/init.d/gitlab.default.example origin/9-3-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 12. Install libs, migrations, etc.
GitLab 9.3.8 [introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/24570)
a dependency on the `re2` regular expression library. To install this dependency:
```bash
sudo apt-get install libre2-dev
```
Ubuntu 14.04 (Trusty Tahr) doesn't have the `libre2-dev` package available, but
you can [install re2 manually](https://github.com/google/re2/wiki/Install).
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 13. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 14. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (9.2)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 9.1 to 9.2](9.1-to-9.2.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-3-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-3-stable/lib/support/init.d/gitlab.default.example
doc/update/9.3-to-9.4.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 9.3 to 9.4 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.3.tar.gz
echo '1014ee699071aa2ddd501907d18cbe15399c997d ruby-2.3.3.tar.gz' | shasum -c - && tar xzf ruby-2.3.3.tar.gz
cd ruby-2.3.3
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab now runs [webpack](http://webpack.js.org) to compile frontend assets and
it has a minimum requirement of node v4.3.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v4.3.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
Since 8.17, GitLab requires the use of yarn `>= v0.17.0` to manage
JavaScript dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 9.2 and higher only supports Go 1.8.3 and dropped support for Go
1.5.x through 1.7.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://storage.googleapis.com/golang/go1.8.3.linux-amd64.tar.gz
echo '1862f4c3d3907e59b04a757cfda0ea7aa9ef39274af99a784f5be843c80c6772 go1.8.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.8.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.8.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 9-4-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 9-4-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
If you have not yet set up Gitaly then follow [Gitaly section of the installation
guide](../install/installation.md#install-gitaly).
As of GitLab 9.4, Gitaly is a mandatory component of GitLab.
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-9.4 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 11. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/9-3-stable:config/gitlab.yml.example origin/9-4-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/9-3-stable:lib/support/nginx/gitlab-ssl origin/9-4-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/9-3-stable:lib/support/nginx/gitlab origin/9-4-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-4-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-4-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/9-3-stable:lib/support/init.d/gitlab.default.example origin/9-4-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 12. Install libs, migrations, etc.
GitLab 9.4 [introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/24570)
a dependency on the `re2` regular expression library. To install this dependency:
```bash
sudo apt-get install libre2-dev
```
Ubuntu 14.04 (Trusty Tahr) doesn't have the `libre2-dev` package available, but
you can [install re2 manually](https://github.com/google/re2/wiki/Install).
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 13. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 14. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (9.3)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 9.2 to 9.3](9.2-to-9.3.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-4-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-4-stable/lib/support/init.d/gitlab.default.example
doc/update/9.4-to-9.5.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 9.4 to 9.5 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.3.tar.gz
echo '1014ee699071aa2ddd501907d18cbe15399c997d ruby-2.3.3.tar.gz' | shasum -c - && tar xzf ruby-2.3.3.tar.gz
cd ruby-2.3.3
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab now runs [webpack](http://webpack.js.org) to compile frontend assets and
it has a minimum requirement of node v4.3.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v4.3.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
Since 8.17, GitLab requires the use of yarn `>= v0.17.0` to manage
JavaScript dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 9.2 and higher only supports Go 1.8.3 and dropped support for Go
1.5.x through 1.7.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://storage.googleapis.com/golang/go1.8.3.linux-amd64.tar.gz
echo '1862f4c3d3907e59b04a757cfda0ea7aa9ef39274af99a784f5be843c80c6772 go1.8.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.8.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.8.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 9-5-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 9-5-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-9.5 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 11. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/9-4-stable:config/gitlab.yml.example origin/9-5-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/9-4-stable:lib/support/nginx/gitlab-ssl origin/9-5-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/9-4-stable:lib/support/nginx/gitlab origin/9-5-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-5-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-5-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/9-4-stable:lib/support/init.d/gitlab.default.example origin/9-5-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 12. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 13. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 14. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (9.4)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 9.3 to 9.4](9.3-to-9.4.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-5-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/9-5-stable/lib/support/init.d/gitlab.default.example
doc/update/9.5-to-10.0.md
View file @ 43fc0557
--- ---
comments: false redirect_to: upgrading_from_source.md
--- ---
# From 9.5 to 10.0 This document was moved to [another location](upgrading_from_source.md).
Make sure you view this update guide from the tag (version) of GitLab you would
like to install. In most cases this should be the highest numbered production
tag (without rc in it). You can select the tag in the version dropdown at the
top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: GitLab 9.0 and higher only support Ruby 2.3.x and dropped support for Ruby 2.1.x. Be
sure to upgrade your interpreter if necessary.
You can check which version you are running with `ruby -v`.
Download and compile Ruby:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.3.tar.gz
echo '1014ee699071aa2ddd501907d18cbe15399c997d ruby-2.3.3.tar.gz' | shasum -c - && tar xzf ruby-2.3.3.tar.gz
cd ruby-2.3.3
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
GitLab now runs [webpack](http://webpack.js.org) to compile frontend assets and
it has a minimum requirement of node v4.3.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v4.3.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
Since 8.17, GitLab requires the use of yarn `>= v0.17.0` to manage
JavaScript dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 9.2 and higher only supports Go 1.8.3 and dropped support for Go
1.5.x through 1.7.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://storage.googleapis.com/golang/go1.8.3.linux-amd64.tar.gz
echo '1862f4c3d3907e59b04a757cfda0ea7aa9ef39274af99a784f5be843c80c6772 go1.8.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.8.3.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.8.3.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-0-stable
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout 10-0-stable-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### New Gitaly configuration options required
In order to function Gitaly needs some additional configuration information. Below we assume you installed Gitaly in `/home/git/gitaly` and GitLab Shell in `/home/git/gitlab-shell`.
```shell
echo '
[gitaly-ruby]
dir = "/home/git/gitaly/ruby"
[gitlab-shell]
dir = "/home/git/gitlab-shell"
' | sudo -u git tee -a /home/git/gitaly/config.toml
```
#### Check Gitaly configuration
Due to a bug in the `rake gitlab:gitaly:install` script your Gitaly
configuration file may contain syntax errors. The block name
`[[storages]]`, which may occur more than once in your `config.toml`
file, should be `[[storage]]` instead.
```shell
sudo -u git -H sed -i.pre-10.0 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
```
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 11. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/9-5-stable:config/gitlab.yml.example origin/10-0-stable:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/9-5-stable:lib/support/nginx/gitlab-ssl origin/10-0-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/9-5-stable:lib/support/nginx/gitlab origin/10-0-stable:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx
configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-0-stable/lib/support/init.d/gitlab.default.example#L38
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line
to config/initializers/smtp_settings.rb:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-0-stable/config/initializers/smtp_settings.rb.sample#L13
#### Init script
There might be new configuration options available for [`gitlab.default.example`][gl-example]. View them with the command below and apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/9-5-stable:lib/support/init.d/gitlab.default.example origin/10-0-stable:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 12. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 13. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 14. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Things went south? Revert to previous version (9.5)
### 1. Revert the code to the previous version
Follow the [upgrade guide from 9.4 to 9.5](9.4-to-9.5.md), except for the
database migration (the backup is already migrated to the previous version).
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-0-stable/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/10-0-stable/lib/support/init.d/gitlab.default.example
doc/update/README.md
View file @ 43fc0557
...@@ -18,14 +18,20 @@ Based on your installation, choose a section below that fits your needs. ...@@ -18,14 +18,20 @@ Based on your installation, choose a section below that fits your needs.
## Installation from source ## Installation from source
- [Upgrading Community Edition from source][source-ce] - The individual - [Upgrading Community Edition and Enterprise Edition from
upgrade guides are for those who have installed GitLab CE from source. source](upgrading_from_source.md) - The guidelines for upgrading Community
- [Upgrading Enterprise Edition from source][source-ee] - The individual Edition and Enterprise Edition from source.
upgrade guides are for those who have installed GitLab EE from source.
- [Patch versions](patch_versions.md) guide includes the steps needed for a - [Patch versions](patch_versions.md) guide includes the steps needed for a
patch version, eg. 6.2.0 to 6.2.1, and apply to both Community and Enterprise patch version, eg. 6.2.0 to 6.2.1, and apply to both Community and Enterprise
Editions. Editions.
In the past we used separate documents for the upgrading instructions, but we
have since switched to using a single document. The old upgrading guidelines
can still be found in the Git repository:
- [Old upgrading guidelines for Community Edition][old-ce-upgrade-docs]
- [Old upgrading guidelines for Enterprise Edition][old-ee-upgrade-docs]
## Installation using Docker ## Installation using Docker
GitLab provides official Docker images for both Community and Enterprise GitLab provides official Docker images for both Community and Enterprise
...@@ -113,11 +119,10 @@ The following guides are for subscribers of the Enterprise Edition only. ...@@ -113,11 +119,10 @@ The following guides are for subscribers of the Enterprise Edition only.
If you wish to upgrade your GitLab installation from Community to Enterprise If you wish to upgrade your GitLab installation from Community to Enterprise
Edition, follow the guides below based on the installation method: Edition, follow the guides below based on the installation method:
- [Source CE to EE update guides][source-ee] - Find your version, and follow the - [Source CE to EE update guides][source-ce-to-ee] - The steps are very similar
`-ce-to-ee.md` guide. The steps are very similar to a version upgrade: stop to a version upgrade: stop the server, get the code, update config files for
the server, get the code, update config files for the new functionality, the new functionality, install libraries and do migrations, update the init
install libraries and do migrations, update the init script, start the script, start the application and check its status.
application and check its status.
- [Omnibus CE to EE][omni-ce-ee] - Follow this guide to update your Omnibus - [Omnibus CE to EE][omni-ce-ee] - Follow this guide to update your Omnibus
GitLab Community Edition to the Enterprise Edition. GitLab Community Edition to the Enterprise Edition.
...@@ -138,8 +143,9 @@ possible. ...@@ -138,8 +143,9 @@ possible.
upgrading a PostgreSQL database with minimal downtime. upgrading a PostgreSQL database with minimal downtime.
[omnidocker]: http://docs.gitlab.com/omnibus/docker/README.html [omnidocker]: http://docs.gitlab.com/omnibus/docker/README.html
[source-ee]: https://gitlab.com/gitlab-org/gitlab-ee/tree/master/doc/update [old-ee-upgrade-docs]: https://gitlab.com/gitlab-org/gitlab-ee/tree/11-8-stable-ee/doc/update
[source-ce]: https://gitlab.com/gitlab-org/gitlab-ce/tree/master/doc/update [old-ce-upgrade-docs]: https://gitlab.com/gitlab-org/gitlab-ce/tree/11-8-stable/doc/update
[source-ce-to-ee]: upgrading_from_ce_to_ee.md
[ee-ce]: ../downgrade_ee_to_ce/README.md [ee-ce]: ../downgrade_ee_to_ce/README.md
[ce]: https://about.gitlab.com/features/#community [ce]: https://about.gitlab.com/features/#community
[ee]: https://about.gitlab.com/features/#enterprise [ee]: https://about.gitlab.com/features/#enterprise
......
doc/update/upgrading_from_ce_to_ee.md 0 → 100644
View file @ 43fc0557
---
comments: false
---
# Upgrading from Community Edition to Enterprise Edition from source
NOTE: **NOTE** In the past we used separate documents for upgrading from
Community Edition to Enterprise Edition. These documents can be found in the
[`doc/update` directory of Enterprise Edition's source
code][old-ee-upgrade-docs].
## General upgrading steps
This guide assumes you have a correctly configured and tested installation of
GitLab Community Edition. If you run into any trouble or if you have any
questions please contact us at [support@gitlab.com].
In all examples, replace `EE_BRANCH` with the Enterprise Edition branch for the
version you are using, and `CE_BRANCH` with the Community Edition branch.
Branch names use the format `major-minor-stable-ee` for Enterprise Edition, and
`major-minor-stable` for Community Edition. For example, for 11.8.0 you would
use the following branches:
* Enterprise Edition: `11-8-stable-ee`
* Community Edition: `11-8-stable`
### 0. Backup
Make a backup just in case something goes wrong:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
For installations using MySQL, this may require granting "LOCK TABLES"
privileges to the GitLab user on the database version.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Get the EE code
```bash
cd /home/git/gitlab
sudo -u git -H git remote add -f ee https://gitlab.com/gitlab-org/gitlab-ee.git
sudo -u git -H git checkout EE_BRANCH
```
### 3. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Clean up assets and cache
sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production
```
### 4. Install `gitlab-elasticsearch-indexer` (optional) **[STARTER ONLY]**
If you're interested in using GitLab's new [elasticsearch repository
indexer][indexer-beta] (currently in beta) please follow the instructions on the
document linked above and enable the indexer usage in the GitLab admin settings.
### 5. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 6. Check application status
Check if GitLab and its environment are configured correctly:
```bash
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check with:
```bash
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations upgrade complete!
## Things went south? Revert to previous version (Community Edition)
### 1. Revert the code to the previous version
```bash
cd /home/git/gitlab
sudo -u git -H git checkout CE_BRANCH
```
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
## Version specific steps
Certain versions of GitLab may require you to perform additional steps when
upgrading from Community Edition to Enterprise Edition. Should such steps be
necessary, they will listed per version below.
<!--
Example:
### 11.8.0
Additional instructions here.
-->
[support@gitlab.com]: mailto:support@gitlab.com
[old-ee-upgrade-docs]: https://gitlab.com/gitlab-org/gitlab-ee/tree/11-8-stable-ee/doc/update
[indexer-beta]: https://docs.gitlab.com/ee/integration/elasticsearch.html
doc/update/upgrading_from_source.md 0 → 100644
View file @ 43fc0557
---
comments: false
---
# Upgrading Community Edition and Enterprise Edition from source
Make sure you view this update guide from the branch (version) of GitLab you
would like to install (e.g., `11.8`. You can select the version in the version
dropdown at the top left corner of GitLab (below the menu bar).
In all examples, replace `BRANCH` with the branch for the version you uprading
to (e.g. `11-8-stable` for `11.8`), and replace `PREVIOUS_BRANCH` with the
branch for the version you are upgrading from (e.g. `11-7-stable` for `11.7`).
If the highest number stable branch is unclear please check the
[GitLab Blog](https://about.gitlab.com/blog/archives.html) for installation
guide links by version.
## Guidelines for all versions
This section contains all the steps necessary to upgrade Community Edition or
Enterprise Edition, regardless of the version you are upgrading to. Version
specific guidelines (should there be any) are covered separately.
### 1. Stop server
```bash
sudo service gitlab stop
```
### 2. Backup
NOTE: If you installed GitLab from source, make sure `rsync` is installed.
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
```
### 3. Update Ruby
NOTE: Beginning in GitLab 11.0, we only support Ruby 2.4 or higher, and dropped
support for Ruby 2.3. Be sure to upgrade if necessary.
You can check which version you are running with `ruby -v`.
Download Ruby and compile it:
```bash
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.5/ruby-2.5.3.tar.gz
echo 'f919a9fbcdb7abecd887157b49833663c5c15fda ruby-2.5.3.tar.gz' | shasum -c - && tar xzf ruby-2.5.3.tar.gz
cd ruby-2.5.3
./configure --disable-install-rdoc
make
sudo make install
```
Install Bundler:
```bash
sudo gem install bundler --no-document --version '< 2'
```
### 4. Update Node
NOTE: Beginning in GitLab 11.8, we only support node 8 or higher, and dropped
support for node 6. Be sure to upgrade if necessary.
GitLab utilizes [webpack](http://webpack.js.org) to compile frontend assets.
This requires a minimum version of node v8.10.0.
You can check which version you are running with `node -v`. If you are running
a version older than `v8.10.0` you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
<https://nodejs.org/en/download/>
GitLab also requires the use of yarn `>= v1.10.0` to manage JavaScript
dependencies.
```bash
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
```
More information can be found on the [yarn website](https://yarnpkg.com/en/docs/install).
### 5. Update Go
NOTE: GitLab 11.4 and higher only supports Go 1.10.x and newer, and dropped support for Go
1.9.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with `go version`.
Download and install Go:
```bash
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://dl.google.com/go/go1.10.5.linux-amd64.tar.gz
echo 'a035d9beda8341b645d3f45a1b620cf2d8fb0c5eb409be36b389c0fd384ecc3a go1.10.5.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.10.5.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.10.5.linux-amd64.tar.gz
```
### 6. Get latest code
```bash
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
```
For GitLab Community Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout BRANCH
```
OR
For GitLab Enterprise Edition:
```bash
cd /home/git/gitlab
sudo -u git -H git checkout BRANCH-ee
```
### 7. Update gitlab-shell
```bash
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
```
### 8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
```
### 9. Update Gitaly
#### Compile Gitaly
```shell
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
```
### 10. Update gitlab-pages
#### Only needed if you use GitLab Pages
Install and compile gitlab-pages. GitLab-Pages uses
[GNU Make](https://www.gnu.org/software/make/).
If you are not using Linux you may have to run `gmake` instead of
`make` below.
```bash
cd /home/git/gitlab-pages
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_PAGES_VERSION)
sudo -u git -H make
```
### 11. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary
permissions on the database:
```bash
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
```
If you use MySQL with replication, or just have MySQL configured with binary logging,
you will need to also run the following on all of your MySQL servers:
```bash
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
```
You can make this setting permanent by adding it to your `my.cnf`:
```
log_bin_trust_function_creators=1
```
### 12. Update configuration files
#### New configuration options for `gitlab.yml`
There might be configuration options available for [`gitlab.yml`][yaml]. View
them with the command below and apply them manually to your current
`gitlab.yml`:
```sh
cd /home/git/gitlab
git diff origin/PREVIOUS_BRANCH:config/gitlab.yml.example origin/BRANCH:config/gitlab.yml.example
```
#### Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
```sh
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/PREVIOUS_BRANCH:lib/support/nginx/gitlab-ssl origin/BRANCH:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/PREVIOUS_BRANCH:lib/support/nginx/gitlab origin/BRANCH:lib/support/nginx/gitlab
```
If you are using Strict-Transport-Security in your installation to continue
using it you must enable it in your Nginx configuration as GitLab application no
longer handles setting it.
If you are using Apache instead of NGINX please see the updated [Apache templates].
Also note that because Apache does not support upstreams behind Unix sockets you
will need to let gitlab-workhorse listen on a TCP port. You can do this
via [/etc/default/gitlab].
#### SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to
add the following line to `config/initializers/smtp_settings.rb`:
```ruby
ActionMailer::Base.delivery_method = :smtp
```
See [smtp_settings.rb.sample] as an example.
#### Init script
There might be new configuration options available for
[`gitlab.default.example`][gl-example]. View them with the command below and
apply them manually to your current `/etc/default/gitlab`:
```sh
cd /home/git/gitlab
git diff origin/PREVIOUS_BRANCH:lib/support/init.d/gitlab.default.example origin/BRANCH:lib/support/init.d/gitlab.default.example
```
Ensure you're still up-to-date with the latest init script changes:
```bash
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
```
For Ubuntu 16.04.1 LTS:
```bash
sudo systemctl daemon-reload
```
### 13. Install libs, migrations, etc.
```bash
cd /home/git/gitlab
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --deployment --without development test mysql aws kerberos
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --deployment --without development test postgres aws kerberos
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
```
**MySQL installations**: Run through the `MySQL strings limits` and `Tables and
data conversion to utf8mb4` [tasks](../install/database_mysql.md).
### 14. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
### 15. Check application status
Check if GitLab and its environment are configured correctly:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
```
To make sure you didn't miss anything run a more thorough check:
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
```
If all items are green, then congratulations, the upgrade is complete!
## Version specific upgrading instructions
This section contains upgrading instructions for specific versions. When
present, first follow the upgrading guidelines for all versions. If the version
you are upgrading to is not listed here, then no additional steps are required.
<!--
Example:
### 11.8.0
Additional instructions here.
-->
## Things went south? Revert to previous version
### 1. Revert the code to the previous version
To revert to a previous version, you'll need to following the upgrading guides
for the previous version. If you upgraded to 11.8 and want to revert back to
11.7, you'll need to follow the guides for upgrading from 11.6 to 11.7. You can
use the version dropdown at the top of the page to select the right version.
When reverting, you should _not_ follow the database migration guides, as the
backup is already migrated to the previous version.
### 2. Restore from the backup
```bash
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
```
If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/gitlab.yml.example
[gl-example]: https://gitlab.com/gitlab-org/gitlab-ce/blob/master/lib/support/init.d/gitlab.default.example
[smtp_settings.rb.sample]: https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/initializers/smtp_settings.rb.sample#L13
[Apache templates]: https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache
[/etc/default/gitlab]: https://gitlab.com/gitlab-org/gitlab-ce/blob/master/lib/support/init.d/gitlab.default.example#L38
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7