Add more words to spelling exceptions list

More words that should be allowed to pass through the spell checker.

doc/.vale/gitlab/spelling-exceptions.txt

@@ -5,6 +5,7 @@ Alibaba
 allowlist
 allowlisting
 allowlists
+anonymized
 Ansible
 Anthos
 API
@@ -62,8 +63,11 @@ burndown
 cacheable
 CAS
 CentOS
+Certbot
 chai
-Chatops
+chatbot
+chatbots
+ChatOps
 checksummed
 checksumming
 Citrix
@@ -96,6 +100,7 @@ deduplicated
 deduplicates
 deduplicating
 deduplication
+deliverables
 denylist
 denylisting
 denylists
@@ -105,6 +110,9 @@ deprovision
 deprovisioned
 deprovisioning
 deprovisions
+dequarantine
+dequarantined
+dequarantining
 DevOps
 discoverability
 Disqus
@@ -133,6 +141,7 @@ failovers
 failsafe
 fastlane
 favicon
+Filebeat
 Fio
 firewalled
 Flawfinder
@@ -199,12 +208,14 @@ jsdom
 JupyterHub
 kanban
 kanbans
+Kaniko
 Karma
 Kerberos
 Kibana
 Kinesis
 Knative
 Kramdown
+kubectl
 Kubernetes
 Kubesec
 Laravel
@@ -226,6 +237,8 @@ Makefile
 Makefiles
 Markdown
 markdownlint
+matcher
+matchers
 Mattermost
 mbox
 memoization
@@ -260,6 +273,8 @@ nameservers
 namespace
 namespaced
 namespaces
+namespacing
+namespacings
 Nanoc
 NGINX
 Nokogiri
@@ -278,6 +293,7 @@ Packagist
 parallelization
 parallelizations
 passwordless
+Patroni
 performant
 phaser
 phasers
@@ -327,6 +343,8 @@ Redcarpet
 Redis
 Redmine
 reCAPTCHA
+redirection
+redirections
 refactorings
 referer
 referers
@@ -343,6 +361,7 @@ requeue
 requeued
 requeues
 reusability
+Restlet
 resynced
 resyncing
 resyncs
@@ -368,6 +387,8 @@ Salesforce
 SAML
 sandboxing
 sbt
+scatterplot
+scatterplots
 Sendmail
 Sentry
 serverless
@@ -421,6 +442,7 @@ substrings
 syslog
 tcpdump
 Tiller
+timecop
 todos
 tokenizer
 Tokenizers
@@ -432,13 +454,15 @@ tooltips
 Trello
 triaging
 TypeScript
+Twilio
 Twitter
 Ubuntu
 unarchive
 unarchived
 unarchives
-Unassign
-Unassigns
+unarchiving
+unassign
+unassigns
 uncheck
 unchecked
 unchecking
@@ -482,10 +506,12 @@ unresolve
 unresolved
 unresolving
 unschedule
+unscoped
 unstage
 unstaged
 unstages
 unstaging
+unstarted
 unstash
 unstashed
 unstashing
@@ -504,6 +530,8 @@ validator
 validators
 vendored
 versionless
+viewport
+viewports
 virtualized
 virtualizing
 Vue

doc/development/rake_tasks.md

@@ -147,7 +147,7 @@ To run several tests inside one directory:
 
 ### Speed up tests, Rake tasks, and migrations
 
-[Spring](https://github.com/rails/spring) is a Rails application preloader. It
+[Spring](https://github.com/rails/spring) is a Rails application pre-loader. It
 speeds up development by keeping your application running in the background so
 you don't need to boot it every time you run a test, Rake task or migration.
 
@@ -203,9 +203,9 @@ To generate a sprite file containing all the Emoji, run:
 bundle exec rake gemojione:sprite
 ```
 
-If new emoji are added, the spritesheet may change size. To compensate for
-such changes, first generate the `emoji.png` spritesheet with the above Rake
-task, then check the dimensions of the new spritesheet and update the
+If new emoji are added, the sprite sheet may change size. To compensate for
+such changes, first generate the `emoji.png` sprite sheet with the above Rake
+task, then check the dimensions of the new sprite sheet and update the
 `SPRITESHEET_WIDTH` and `SPRITESHEET_HEIGHT` constants accordingly.
 
 ## Update project templates

doc/development/routing.md

@@ -76,6 +76,6 @@ To get started, see an [example merge request](https://gitlab.com/gitlab-org/git
 
 ## Useful links
 
-- [Routing improvements masterplan](https://gitlab.com/gitlab-org/gitlab/-/issues/215362)
+- [Routing improvements master plan](https://gitlab.com/gitlab-org/gitlab/-/issues/215362)
 - [Scoped routing explained](https://gitlab.com/gitlab-org/gitlab/-/issues/214217)
 - [Removal of deprecated routes](https://gitlab.com/gitlab-org/gitlab/-/issues/28848)

doc/development/service_measurement.md

@@ -8,8 +8,8 @@ The measuring module is a tool that allows to measure a service's execution, and
 
 - Service class name
 - Execution time
-- Number of sql calls
-- Detailed gc stats and diffs
+- Number of SQL calls
+- Detailed `gc` stats and diffs
 - RSS memory usage
 - Server worker ID
 
@@ -74,7 +74,7 @@ In the following example, the `:gitlab_service_measuring_projects_import_service
 [feature flag](feature_flags/development.md#enabling-a-feature-flag-in-development) is used to enable the measuring feature
 for `Projects::ImportService`.
 
-From chatops:
+From ChatOps:
 
 ```shell
 /chatops run feature set gitlab_service_measuring_projects_import_service true

doc/development/sidekiq_style_guide.md

@@ -78,7 +78,7 @@ As a general rule, a worker can be considered idempotent if:
 
 - It can safely run multiple times with the same arguments.
 - Application side-effects are expected to happen only once
-  (or side-effects of a second run are not impactful).
+  (or side-effects of a second run do not have an effect).
 
 A good example of that would be a cache expiration worker.
 
@@ -156,7 +156,7 @@ named `disable_<queue name>_deduplication`. For example to disable
 deduplication for the `AuthorizedProjectsWorker`, we would enable the
 feature flag `disable_authorized_projects_deduplication`.
 
-From chatops:
+From ChatOps:
 
 ```shell
 /chatops run feature set disable_authorized_projects_deduplication true
@@ -272,10 +272,10 @@ annotated with the `worker_resource_boundary` method.
 
 Most workers tend to spend most of their time blocked, wait on network responses
 from other services such as Redis, PostgreSQL, and Gitaly. Since Sidekiq is a
-multithreaded environment, these jobs can be scheduled with high concurrency.
+multi-threaded environment, these jobs can be scheduled with high concurrency.
 
 Some workers, however, spend large amounts of time _on-CPU_ running logic in
-Ruby. Ruby MRI does not support true multithreading - it relies on the
+Ruby. Ruby MRI does not support true multi-threading - it relies on the
 [GIL](https://thoughtbot.com/blog/untangling-ruby-threads#the-global-interpreter-lock)
 to greatly simplify application development by only allowing one section of Ruby
 code in a process to run at a time, no matter how many cores the machine
@@ -427,7 +427,7 @@ isn't picked up by the cops. In any case, please leave a code-comment
 pointing to which context will be used when disabling the cops.
 
 When you do provide objects to the context, please make sure that the
-route for namespaces and projects is preloaded. This can be done using
+route for namespaces and projects is pre-loaded. This can be done using
 the `.with_route` scope defined on all `Routable`s.
 
 ### Cron-Workers

doc/development/telemetry/usage_ping.md

@@ -113,9 +113,9 @@ sequenceDiagram
 ## How Usage Ping works
 
 1. The Usage Ping [cron job](https://gitlab.com/gitlab-org/gitlab/-/blob/master/app/workers/gitlab_usage_ping_worker.rb#L30) is set in Sidekiq to run weekly.
-1. When the cron job runs, it calls [GitLab::UsageData.to_json](https://gitlab.com/gitlab-org/gitlab/-/blob/master/app/services/submit_usage_ping_service.rb#L22).
-1. GitLab::UsageData.to_json [cascades down](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/gitlab/usage_data.rb#L22) to ~400+ other counter method calls.
-1. The response of all methods calls are [merged together](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/gitlab/usage_data.rb#L14) into a single JSON payload in GitLab::UsageData.to_json.
+1. When the cron job runs, it calls [`GitLab::UsageData.to_json`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/app/services/submit_usage_ping_service.rb#L22).
+1. `GitLab::UsageData.to_json` [cascades down](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/gitlab/usage_data.rb#L22) to ~400+ other counter method calls.
+1. The response of all methods calls are [merged together](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/gitlab/usage_data.rb#L14) into a single JSON payload in `GitLab::UsageData.to_json`.
 1. The JSON payload is then [posted to the Versions application]( https://gitlab.com/gitlab-org/gitlab/-/blob/master/app/services/submit_usage_ping_service.rb#L20).
 
 ## Implementing Usage Ping
@@ -137,11 +137,11 @@ For large tables, PostgreSQL can take a long time to count rows due to MVCC [(Mu
 For GitLab.com, there are extremely large tables with 15 second query timeouts, so we use batch counting to avoid encountering timeouts. Here are the sizes of some GitLab.com tables:
 
 | Table                        | Row counts in millions |
-|----------------------------|------------------------|
-| merge_request_diff_commits | 2280                   |
-| ci_build_trace_sections    | 1764                   |
-| merge_request_diff_files   | 1082                   |
-| events                     | 514                    |
+|------------------------------|------------------------|
+| `merge_request_diff_commits` | 2280                   |
+| `ci_build_trace_sections`    | 1764                   |
+| `merge_request_diff_files`   | 1082                   |
+| `events`                     | 514                    |
 
 There are two batch counting methods provided, `Ordinary Batch Counters` and `Distinct Batch Counters`. Batch counting requires indexes on columns to calculate max, min, and range queries. In some cases, a specialized index may need to be added on the columns involved in a counter.
 
@@ -204,7 +204,7 @@ Method: `redis_usage_data(counter, &block)`
 Arguments:
 
 - `counter`: a counter from `Gitlab::UsageDataCounters`, that has `fallback_totals` method implemented
-- or a `block`: wich is evaluated
+- or a `block`: which is evaluated
 
 Example of usage:
 

doc/development/testing_guide/best_practices.md

@@ -330,7 +330,7 @@ Feature.enabled?(:ci_live_trace) # => false
 If you wish to set up a test where a feature flag is enabled only
 for some actors and not others, you can specify this in options
 passed to the helper. For example, to enable the `ci_live_trace`
-feature flag for a specifc project:
+feature flag for a specific project:
 
 ```ruby
 project1, project2 = build_list(:project, 2)
@@ -347,7 +347,7 @@ This represents an actual behavior of FlipperGate:
 
 1. You can enable an override for a specified actor to be enabled
 1. You can disable (remove) an override for a specified actor,
-   fallbacking to default state
+   falling back to default state
 1. There's no way to model that you explicitly disable a specified actor
 
 ```ruby
@@ -467,7 +467,7 @@ However, if a spec makes direct Redis calls, it should mark itself with the
 #### Background jobs / Sidekiq
 
 By default, Sidekiq jobs are enqueued into a jobs array and aren't processed.
-If a test enqueues Sidekiq jobs and need them to be processed, the
+If a test queues Sidekiq jobs and need them to be processed, the
 `:sidekiq_inline` trait can be used.
 
 The `:sidekiq_might_not_need_inline` trait was added when [Sidekiq inline mode was
@@ -723,7 +723,7 @@ module Spec
 end
 ```
 
-Helpers should not change the RSpec config. For instance, the helpers module
+Helpers should not change the RSpec configuration. For instance, the helpers module
 described above should not include:
 
 ```ruby
@@ -784,9 +784,9 @@ end
 This will create a repository containing two files, with default permissions and
 the specified content.
 
-### Config
+### Configuration
 
-RSpec config files are files that change the RSpec config (i.e.
+RSpec configuration files are files that change the RSpec configuration (i.e.
 `RSpec.configure do |config|` blocks). They should be placed under
 `spec/support/`.
 
@@ -805,7 +805,7 @@ RSpec.configure do |config|
 end
 ```
 
-If a config file only consists of `config.include`, you can add these
+If a configuration file only consists of `config.include`, you can add these
 `config.include` directly in `spec/spec_helper.rb`.
 
 For very generic helpers, consider including them in the `spec/support/rspec.rb`

doc/development/testing_guide/end_to_end/page_objects.md

@@ -89,7 +89,7 @@ end
 
 ### Defining Elements
 
-The `view` DSL method will correspond to the rails View, partial, or vue component that renders the elements.
+The `view` DSL method will correspond to the rails View, partial, or Vue component that renders the elements.
 
 The `element` DSL method in turn declares an element for which a corresponding
 `data-qa-selector=element_name_snaked` data attribute will need to be added to the view file.
@@ -134,7 +134,7 @@ view 'app/views/my/view.html.haml' do
 end
 ```
 
-To add these elements to the view, you must change the rails View, partial, or vue component by adding a `data-qa-selector` attribute
+To add these elements to the view, you must change the rails View, partial, or Vue component by adding a `data-qa-selector` attribute
 for each element defined.
 
 In our case, `data-qa-selector="login_field"`, `data-qa-selector="password_field"` and `data-qa-selector="sign_in_button"`
@@ -149,7 +149,7 @@ In our case, `data-qa-selector="login_field"`, `data-qa-selector="password_field
 
 Things to note:
 
-- The name of the element and the qa_selector must match and be snake_cased
+- The name of the element and the `qa_selector` must match and be snake_cased
 - If the element appears on the page unconditionally, add `required: true` to the element. See
   [Dynamic element validation](dynamic_element_validation.md)
 - You may see `.qa-selector` classes in existing Page Objects. We should prefer the [`data-qa-selector`](#data-qa-selector-vs-qa-selector)
@@ -255,7 +255,7 @@ These steps ensure the sanity selectors check will detect problems properly.
 
 For example, `qa/qa/ee/page/merge_request/show.rb` adds EE-specific methods to `qa/qa/page/merge_request/show.rb` (with
 `QA::Page::MergeRequest::Show.prepend_if_ee('QA::EE::Page::MergeRequest::Show')`) and following is how it's implemented
-(only showing the relevant part and refering to the 4 steps described above with inline comments):
+(only showing the relevant part and referring to the 4 steps described above with inline comments):
 
 ```ruby
 module QA

doc/development/testing_guide/end_to_end/running_tests_that_require_special_setup.md

@@ -24,7 +24,7 @@ To run the tests from the `/qa` directory:
 CHROME_HEADLESS=false bin/qa Test::Instance::All http://localhost -- qa/specs/features/ee/browser_ui/3_create/jenkins/jenkins_build_status_spec.rb
 ```
 
-The test will automatically spinup a Docker container for Jenkins and tear down once the test completes.
+The test will automatically spin up a Docker container for Jenkins and tear down once the test completes.
 
 However, if you need to run Jenkins manually outside of the tests, use this command:
 

doc/development/testing_guide/end_to_end/style_guide.md

@@ -49,7 +49,7 @@ Notice that in the above example, before clicking the `:operations_environments_
 
 When adding new elements to a page, it's important that we have a uniform element naming convention.
 
-We follow a simple formula roughly based on hungarian notation.
+We follow a simple formula roughly based on Hungarian notation.
 
 *Formula*: `element :<descriptor>_<type>`
 
@@ -109,7 +109,7 @@ we use the name of the page object in [snake_case](https://en.wikipedia.org/wiki
 (all lowercase, with words separated by an underscore). See good and bad examples below.
 
 While we prefer to follow the standard in most cases, it is also acceptable to
-use common abbreviations (e.g., mr) or other alternatives, as long as
+use common abbreviations (e.g., `mr`) or other alternatives, as long as
 the name is not ambiguous. This can include appending `_page` if it helps to
 avoid confusion or make the code more readable. For example, if a page object is
 named `New`, it could be confusing to name the block argument `new` because that

doc/development/testing_guide/flaky_tests.md

@@ -49,7 +49,7 @@ examples in a JSON report file on `master` (`retrieve-tests-metadata` and
 
 This was originally implemented in: <https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/13021>.
 
-If you want to enable retries locally, you can use the `RETRIES` env variable.
+If you want to enable retries locally, you can use the `RETRIES` environment variable.
 For instance `RETRIES=1 bin/rspec ...` would retry the failing examples once.
 
 ## Problems we had in the past at GitLab
@@ -79,11 +79,11 @@ For instance `RETRIES=1 bin/rspec ...` would retry the failing examples once.
 - [Bis](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/34609#note_34048715): <https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/12604>
 - [Bis](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/34698#note_34276286): <https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/12664>
 - [Assert against the underlying database state instead of against a page's content](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/31437): <https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/10934>
-- In JS tests, shifting elements can cause Capybara to misclick when the element moves at the exact time Capybara sends the click
+- In JS tests, shifting elements can cause Capybara to mis-click when the element moves at the exact time Capybara sends the click
   - [Dropdowns rendering upward or downward due to window size and scroll position](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/17660)
-  - [Lazy loaded images can cause Capybara to misclick](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/18713)
+  - [Lazy loaded images can cause Capybara to mis-click](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/18713)
 - [Triggering JS events before the event handlers are set up](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/18742)
-- [Wait for the image to be lazy-loaded when asserting on a Markdown image's src attribute](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/25408)
+- [Wait for the image to be lazy-loaded when asserting on a Markdown image's `src` attribute](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/25408)
 
 #### Capybara viewport size related issues
 

doc/development/testing_guide/review_apps.md

@@ -55,8 +55,8 @@ subgraph "CNG-mirror pipeline"
      each component (e.g. `gitlab-rails-ee`, `gitlab-shell`, `gitaly` etc.)
      based on the commit from the [GitLab pipeline](https://gitlab.com/gitlab-org/gitlab/pipelines/125315730) and stores
      them in its [registry](https://gitlab.com/gitlab-org/build/CNG-mirror/container_registry).
-   - We use the [`CNG-mirror`](https://gitlab.com/gitlab-org/build/CNG-mirror) project so that the `CNG`, (**C**loud
-     **N**ative **G**itLab), project's registry is not overloaded with a
+   - We use the [`CNG-mirror`](https://gitlab.com/gitlab-org/build/CNG-mirror) project so that the `CNG`, (Cloud
+     Native GitLab), project's registry is not overloaded with a
      lot of transient Docker images.
    - Note that the official CNG images are built by the `cloud-native-image`
      job, which runs only for tags, and triggers itself a [`CNG`](https://gitlab.com/gitlab-org/build/CNG) pipeline.
@@ -139,8 +139,8 @@ browser performance testing using a
 The `review-apps-ee` and `review-apps-ce` clusters are currently set up with
 the following node pools:
 
-- `review-apps-ee` of preemptible `e2-highcpu-16` (16 vCPU, 16 GB memory) nodes with autoscaling
-- `review-apps-ce` of preemptible `n1-standard-8` (8 vCPU, 16 GB memory) nodes with autoscaling
+- `review-apps-ee` of pre-emptible `e2-highcpu-16` (16 vCPU, 16 GB memory) nodes with autoscaling
+- `review-apps-ce` of pre-emptible `n1-standard-8` (8 vCPU, 16 GB memory) nodes with autoscaling
 
 ### Helm
 
@@ -278,14 +278,14 @@ kubectl top pods | sort --key 2 --numeric
 
 **Potential cause:**
 
-This could be a sign that there are too many stale secrets and/or config maps.
+This could be a sign that there are too many stale secrets and/or configuration maps.
 
 **Where to look for further debugging:**
 
 Look at [the list of Configurations](https://console.cloud.google.com/kubernetes/config?project=gitlab-review-apps)
 or `kubectl get secret,cm --sort-by='{.metadata.creationTimestamp}' | grep 'review-'`.
 
-Any secrets or config maps older than 5 days are suspect and should be deleted.
+Any secrets or configuration maps older than 5 days are suspect and should be deleted.
 
 **Useful commands:**
 
@@ -354,7 +354,7 @@ For the record, the debugging steps to find out this issue were:
 1. Web search for exact error message, following rabbit hole to [a relevant Kubernetes bug report](https://github.com/kubernetes/kubernetes/issues/57345)
 1. Access the node over SSH via the GCP console (**Computer Engine > VM
    instances** then click the "SSH" button for the node where the `dns-gitlab-review-app-external-dns` pod runs)
-1. In the node: `systemctl --version` => systemd 232
+1. In the node: `systemctl --version` => `systemd 232`
 1. Gather some more information:
    - `mount | grep kube | wc -l` => e.g. 290
    - `systemctl list-units --all | grep -i var-lib-kube | wc -l` => e.g. 142

doc/development/understanding_explain_plans.md

@@ -198,8 +198,7 @@ There are quite a few different types of nodes, so we only cover some of the
 more common ones here.
 
 A full list of all the available nodes and their descriptions can be found in
-the [PostgreSQL source file
-"plannodes.h"](https://gitlab.com/postgres/postgres/blob/master/src/include/nodes/plannodes.h)
+the [PostgreSQL source file `plannodes.h`](https://gitlab.com/postgres/postgres/blob/master/src/include/nodes/plannodes.h)
 
 ### Seq Scan
 
@@ -686,11 +685,11 @@ Planning time: 0.411 ms
 Execution time: 0.113 ms
 ```
 
-### Chatops
+### ChatOps
 
-[GitLab employees can also use our chatops solution, available in Slack using the
+[GitLab employees can also use our ChatOps solution, available in Slack using the
 `/chatops` slash command](chatops_on_gitlabcom.md).
-You can use chatops to get a query plan by running the following:
+You can use ChatOps to get a query plan by running the following:
 
 ```sql
 /chatops run explain SELECT COUNT(*) FROM projects WHERE visibility_level IN (0, 20)
@@ -719,7 +718,7 @@ with their own clone of the production database.
 Joe is available in the
 [`#database-lab`](https://gitlab.slack.com/archives/CLJMDRD8C) channel on Slack.
 
-Unlike chatops, it gives you a way to execute DDL statements (like creating indexes and tables) and get query plan not only for `SELECT` but also `UPDATE` and `DELETE`.
+Unlike ChatOps, it gives you a way to execute DDL statements (like creating indexes and tables) and get query plan not only for `SELECT` but also `UPDATE` and `DELETE`.
 
 For example, in order to test new index you can do the following:
 

doc/development/uploads.md

@@ -92,7 +92,7 @@ We can identify three major use-cases for an upload:
 
 1. **storage:** if we are uploading for storing a file (i.e. artifacts, packages, discussion attachments). In this case [direct upload](#direct-upload) is the proper level as it's the less resource-intensive operation. Additional information can be found on [File Storage in GitLab](file_storage.md).
 1. **in-controller/synchronous processing:** if we allow processing **small files** synchronously, using [disk buffered upload](#disk-buffered-upload) may speed up development.
-1. **Sidekiq/asynchronous processing:** Async processing must implement [direct upload](#direct-upload), the reason being that it's the only way to support Cloud Native deployments without a shared NFS.
+1. **Sidekiq/asynchronous processing:** Asynchronous processing must implement [direct upload](#direct-upload), the reason being that it's the only way to support Cloud Native deployments without a shared NFS.
 
 For more details about currently broken feature see [epic &1802](https://gitlab.com/groups/gitlab-org/-/epics/1802).
 
@@ -128,7 +128,7 @@ This is the default kind of upload, and it's most expensive in terms of resource
 
 In this case, workhorse is unaware of files being uploaded and acts as a regular proxy.
 
-When a multipart request reaches the rails application, `Rack::Multipart` leaves behind tempfiles in `/tmp` and uses valuable Ruby process time to copy files around.
+When a multipart request reaches the rails application, `Rack::Multipart` leaves behind temporary files in `/tmp` and uses valuable Ruby process time to copy files around.
 
 ```mermaid
 sequenceDiagram

doc/development/utilities.md

@@ -49,7 +49,7 @@ Refer to: <https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/utils/mer
 
 ## `Override`
 
-Refer to <https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/utils/override.rb>:
+Refer to [`override.rb`](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/utils/override.rb):
 
 - This utility can help you check if one method would override
   another or not. It is the same concept as Java's `@Override` annotation
@@ -153,7 +153,7 @@ Refer to <https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/utils/stro
 
 ## `RequestCache`
 
-Refer to <https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/cache/request_cache.rb>.
+Refer to [`request_cache.rb`](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/cache/request_cache.rb).
 
 This module provides a simple way to cache values in RequestStore,
 and the cache key would be based on the class name, method name,

doc/development/windows.md

@@ -47,7 +47,7 @@ There is a chance that your Google Cloud group may already have an image
 built. Search the available images before you do the work to build your
 own.
 
-Build a Google Cloud image with the above shared runners repo by doing the following:
+Build a Google Cloud image with the above shared runners repository by doing the following:
 
 1. Install [Packer](https://www.packer.io/) (tested to work with version 1.5.1).
 1. Install Packer Windows Update Provisioner.
@@ -55,7 +55,7 @@ Build a Google Cloud image with the above shared runners repo by doing the follo
    1. Run the command `go build -o packer-provisioner-windows-update` (requires `go` to be installed).
    1. Verify `packer-provisioner-windows-update` is in the `PATH` environment variable.
 1. Add all [required environment variables](https://gitlab.com/gitlab-org/ci-cd/shared-runners/images/gcp/windows-containers/-/blob/master/packer.json#L2-10)
-   in the `packer.json` file to your environment (perhaps use [direnv](https://direnv.net/)).
+   in the `packer.json` file to your environment (perhaps use [`direnv`](https://direnv.net/)).
 1. Build the image by running the command: `packer build packer.json`.
 
 ## How to use a Windows image in GCP
@@ -96,7 +96,7 @@ Here are a few tips on GCP and Windows.
 ### GCP cost savings
 
 To minimise the cost of your GCP VM instance, stop it when you're not using it.
-If you do, you'll need to redownload the RDP file from the console as the IP
+If you do, you'll need to re-download the RDP file from the console as the IP
 address changes every time you stop and start it.
 
 ### chocolatey
@@ -119,13 +119,13 @@ You can install .NET version 3 support with the following `DISM` command:
 
 `DISM /Online /Enable-Feature /FeatureName:NetFx3 /All`
 
-### nix -> Windows cmd tips
+### nix -> Windows `cmd` tips
 
-The first tip for using the Windows command shell is to open Powershell and use that instead.
+The first tip for using the Windows command shell is to open PowerShell and use that instead.
 
-Start Powershell: `start powershell`.
+Start PowerShell: `start powershell`.
 
-Powershell has aliases for all of the following commands so you don't have to learn the native commands:
+PowerShell has aliases for all of the following commands so you don't have to learn the native commands:
 
 - `ls` ---> `dir`
 - `rm` ---> `del`

doc/user/project/clusters/serverless/index.md

@@ -33,7 +33,7 @@ of the box through its main components:
 - [Serving](https://github.com/knative/serving): Request-driven compute that can scale to zero.
 - [Eventing](https://github.com/knative/eventing): Management and delivery of events.
 
-For more information on Knative, visit the [Knative docs repo](https://github.com/knative/docs).
+For more information on Knative, visit the [Knative docs repository](https://github.com/knative/docs).
 
 With GitLab Serverless, you can deploy both functions-as-a-service (FaaS) and serverless applications.
 
@@ -61,14 +61,14 @@ To run Knative on GitLab, you will need:
    wildcard domain where your applications will be served. Configure your DNS server to use the
    external IP address or hostname for that domain.
 1. **`.gitlab-ci.yml`:** GitLab uses [Kaniko](https://github.com/GoogleContainerTools/kaniko)
-   to build the application. We also use [gitlabktl](https://gitlab.com/gitlab-org/gitlabktl)
+   to build the application. We also use [GitLab Knative tool](https://gitlab.com/gitlab-org/gitlabktl)
    CLI to simplify the deployment of services and functions to Knative.
 1. **`serverless.yml`** (for [functions only](#deploying-functions)): When using serverless to deploy functions, the `serverless.yml` file
    will contain the information for all the functions being hosted in the repository as well as a reference to the
    runtime being used.
 1. **`Dockerfile`** (for [applications only](#deploying-serverless-applications)): Knative requires a
    `Dockerfile` in order to build your applications. It should be included at the root of your
-   project's repo and expose port `8080`. `Dockerfile` is not require if you plan to build serverless functions
+   project's repository and expose port `8080`. `Dockerfile` is not require if you plan to build serverless functions
    using our [runtimes](https://gitlab.com/gitlab-org/serverless/runtimes).
 1. **Prometheus** (optional): Installing Prometheus allows you to monitor the scale and traffic of your serverless function/application.
    See [Installing Applications](../index.md#installing-applications) for more information.
@@ -97,9 +97,9 @@ The minimum recommended cluster size to run Knative is 3-nodes, 6 vCPUs, and 22.
 1. The Ingress is now available at this address and will route incoming requests to the proper service based on the DNS
    name in the request. To support this, a wildcard DNS record should be created for the desired domain name. For example,
    if your Knative base domain is `knative.info` then you need to create an A record or CNAME record with domain `*.knative.info`
-   pointing the ip address or hostname of the Ingress.
+   pointing the IP address or hostname of the Ingress.
 
-   ![dns entry](img/dns-entry.png)
+   ![DNS entry](img/dns-entry.png)
 
 NOTE: **Note:**
 You can deploy either [functions](#deploying-functions) or [serverless applications](#deploying-serverless-applications)
@@ -318,7 +318,7 @@ Explanation of the fields used above:
 |-----------|-------------|
 | `name` | Indicates which provider is used to execute the `serverless.yml` file. In this case, the TriggerMesh middleware. |
 | `envs` | Includes the environment variables to be passed as part of function execution for **all** functions in the file, where `FOO` is the variable name and `BAR` are the variable contents. You may replace this with your own variables. |
-| `secrets` | Includes the contents of the Kubernetes secret as environment variables accessible to be passed as part of function execution for **all** functions in the file. The secrets are expected in ini format. |
+| `secrets` | Includes the contents of the Kubernetes secret as environment variables accessible to be passed as part of function execution for **all** functions in the file. The secrets are expected in INI format. |
 
 ### `functions`
 
@@ -332,7 +332,7 @@ subsequent lines contain the function attributes.
 | `runtime` (optional)| The runtime to be used to execute the function. This can be a runtime alias (see [Runtime aliases](#runtime-aliases)), or it can be a full URL to a custom runtime repository. When the runtime is not specified, we assume that `Dockerfile` is present in the function directory specified by `source`. |
 | `description` | A short description of the function. |
 | `envs` | Sets an environment variable for the specific function only. |
-| `secrets` | Includes the contents of the Kubernetes secret as environment variables accessible to be passed as part of function execution for the specific function only. The secrets are expected in ini format. |
+| `secrets` | Includes the contents of the Kubernetes secret as environment variables accessible to be passed as part of function execution for the specific function only. The secrets are expected in INI format. |
 
 ### Deployment
 
@@ -384,7 +384,7 @@ The sample function can now be triggered from any HTTP client using a simple `PO
      http://functions-echo.functions-1.functions.example.com/
      ```
 
-  1. Using a web-based tool (ie. postman, restlet, etc)
+  1. Using a web-based tool (such as Postman or Restlet)
 
      ![function execution](img/function-execution.png)
 

doc/user/project/import/svn.md

@@ -82,7 +82,7 @@ For more information regarding the SubGit configuration options, refer to
 
 ### Initial translation
 
-Now that SubGit has configured the Git/SVN repos, run `subgit` to perform the
+Now that SubGit has configured the Git/SVN repositories, run `subgit` to perform the
 initial translation of existing SVN revisions into the Git repository:
 
 ```shell

doc/user/project/integrations/webex_teams.md

@@ -4,7 +4,7 @@ You can configure GitLab to send notifications to a Webex Teams space.
 
 ## Create a webhook for the space
 
-1. Go to the [Incoming Webooks app page](https://apphub.webex.com/teams/applications/incoming-webhooks-cisco-systems).
+1. Go to the [Incoming Webhooks app page](https://apphub.webex.com/teams/applications/incoming-webhooks-cisco-systems).
 1. Click **Connect** and log in to Webex Teams, if required.
 1. Enter a name for the webhook and select the space that will receive the notifications.
 1. Click **ADD**.

doc/user/project/issues/design_management.md

@@ -68,7 +68,7 @@ Navigate to the **Design Management** page from any issue by clicking the **Desi
 To upload design images, click the **Upload Designs** button and select images to upload.
 
 [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/34353) in [GitLab Premium](https://about.gitlab.com/pricing/) 12.9,
-you can drag and drop designs onto the dedicated dropzone to upload them.
+you can drag and drop designs onto the dedicated drop zone to upload them.
 
 ![Drag and drop design uploads](img/design_drag_and_drop_uploads_v12_9.png)
 

doc/user/project/issues/index.md

@@ -157,7 +157,7 @@ context, such as past work, dependencies, or duplicates.
 
 ### Crosslinking issues
 
-You can [crosslink issues](crosslinking_issues.md) by referencing an issue from another
+You can [cross-link issues](crosslinking_issues.md) by referencing an issue from another
 issue or merge request by including its URL or ID. The referenced issue displays a
 message in the Activity stream about the reference, with a link to the other issue or MR.
 

doc/user/project/merge_requests/reviewing_and_managing_merge_requests.md

@@ -112,7 +112,7 @@ in a Merge Request. To do so, click the **...** button in the gutter of the Merg
 If you've set up [GitLab CI/CD](../../../ci/README.md) in your project,
 you will be able to see:
 
-- Both pre and post-merge pipelines and the environment information if any.
+- Both pre-merge and post-merge pipelines and the environment information if any.
 - Which deployments are in progress.
 
 If there's an [environment](../../../ci/environments/index.md) and the application is

doc/user/project/pages/getting_started/fork_sample_project.md

@@ -52,5 +52,5 @@ You can take some **optional** further steps:
 
     ![Change repo's path](../img/change_path_v12_10.png)
 
-  - Now go to your SSG's config file and change the [base URL](../getting_started_part_one.md#urls-and-baseurls)
+  - Now go to your SSG's configuration file and change the [base URL](../getting_started_part_one.md#urls-and-baseurls)
     from `"project-name"` to `""`. The project name setting varies by SSG and may not be in the config file.

doc/user/project/pages/index.md

@@ -55,7 +55,7 @@ To update a GitLab Pages website:
 
 | Document | Description |
 | -------- | ----------- |
-| [GitLab Pages domain names, URLs, and baseurls](getting_started_part_one.md) | Learn about GitLab Pages default domains. |
+| [GitLab Pages domain names, URLs, and base URLs](getting_started_part_one.md) | Learn about GitLab Pages default domains. |
 | [Explore GitLab Pages](introduction.md) | Requirements, technical aspects, specific GitLab CI/CD configuration options, Access Control, custom 404 pages, limitations, FAQ. |
 | [Custom domains and SSL/TLS Certificates](custom_domains_ssl_tls_certification/index.md) | Custom domains and subdomains, DNS records, and SSL/TLS certificates. |
 | [Let's Encrypt integration](custom_domains_ssl_tls_certification/lets_encrypt_integration.md) | Secure your Pages sites with Let's Encrypt certificates, which are automatically obtained and renewed by GitLab. |

doc/user/project/pages/introduction.md

@@ -25,7 +25,7 @@ In brief, this is what you need to upload your website in GitLab Pages:
 1. Domain of the instance: domain name that is used for GitLab Pages
    (ask your administrator).
 1. GitLab CI/CD: a `.gitlab-ci.yml` file with a specific job named [`pages`](../../../ci/yaml/README.md#pages) in the root directory of your repository.
-1. A directory called `public` in your site's repo containing the content
+1. A directory called `public` in your site's repository containing the content
    to be published.
 1. GitLab Runner enabled for the project.
 
@@ -87,7 +87,7 @@ will be deleted.
 
 When using Pages under the general domain of a GitLab instance (`*.example.io`),
 you _cannot_ use HTTPS with sub-subdomains. That means that if your
-username/groupname contains a dot, for example `foo.bar`, the domain
+username or group name contains a dot, for example `foo.bar`, the domain
 `https://foo.bar.example.io` will _not_ work. This is a limitation of the
 [HTTP Over TLS protocol](https://tools.ietf.org/html/rfc2818#section-3.1). HTTP pages will continue to work provided you
 don't redirect HTTP to HTTPS.

doc/user/project/pages/lets_encrypt_for_gitlab_pages.md

@@ -105,7 +105,7 @@ operating systems the steps might be slightly different. Follow the
    therefore, it needs to be part of the website content under the
    repo's [`public`](index.md#how-it-works) folder.
 
-1. Add, commit, and push the file into your repo in GitLab. Once the pipeline
+1. Add, commit, and push the file into your repository in GitLab. Once the pipeline
    passes, press **Enter** on your terminal to continue issuing your
    certificate. CertBot will then prompt you with the following message:
 

doc/user/project/repository/forking_workflow.md

@@ -46,7 +46,7 @@ You can use [repository mirroring](repository_mirroring.md) to keep your fork sy
 
 The main difference is that with repository mirroring your remote fork will be automatically kept up-to-date.
 
-Without mirroring, to work locally you'll have to use `git pull` to update your local repo
+Without mirroring, to work locally you'll have to use `git pull` to update your local repository
 with the upstream project, then push the changes back to your fork to update it.
 
 CAUTION: **Caution:**

doc/user/project/repository/index.md

@@ -27,7 +27,7 @@ that you [connect with GitLab via SSH](../../../ssh/README.md).
 
 ## Files
 
-Use a repository to store your files in GitLab. From [GitLab 12.10 onwards](https://gitlab.com/gitlab-org/gitlab/-/issues/33806),
+Use a repository to store your files in GitLab. In [GitLab 12.10 and later](https://gitlab.com/gitlab-org/gitlab/-/issues/33806),
 you'll see on the repository's file tree an icon next to the file name
 according to its extension:
 
@@ -84,9 +84,9 @@ according to the markup language.
 | [AsciiDoc](../../asciidoc.md) | `adoc`, `ad`, `asciidoc` |
 | [Textile](https://textile-lang.com/) | `textile` |
 | [rdoc](http://rdoc.sourceforge.net/doc/index.html)  | `rdoc` |
-| [Orgmode](https://orgmode.org/) | `org` |
+| [Org mode](https://orgmode.org/) | `org` |
 | [creole](http://www.wikicreole.org/) | `creole` |
-| [Mediawiki](https://www.mediawiki.org/wiki/MediaWiki) | `wiki`, `mediawiki` |
+| [MediaWiki](https://www.mediawiki.org/wiki/MediaWiki) | `wiki`, `mediawiki` |
 
 ### Repository README and index files
 
@@ -219,7 +219,9 @@ vendored code, and most markup languages are excluded. This behavior can be
 adjusted by overriding the default. For example, to enable `.proto` files to be
 detected, add the following to `.gitattributes` in the root of your repository.
 
-> *.proto linguist-detectable=true
+```plaintext
+*.proto linguist-detectable=true
+```
 
 ## Locked files **(PREMIUM)**
 

doc/user/project/repository/reducing_the_repo_size_using_git.md

@@ -27,8 +27,7 @@ project](../settings/import_export.html#exporting-a-project-and-its-data).
 To make cloning your project faster, rewrite branches and tags to remove
 unwanted files.
 
-1. [Install `git
-   filter-repo`](https://github.com/newren/git-filter-repo/blob/master/INSTALL.md)
+1. [Install `git filter-repo`](https://github.com/newren/git-filter-repo/blob/master/INSTALL.md)
    using a supported package manager, or from source.
 
 1. Clone a fresh copy of the repository using `--bare`.
@@ -52,8 +51,7 @@ unwanted files.
    git filter-repo --path path/to/big/file.m4v --invert-paths
    ```
 
-   See the [`git filter-repo`
-   documentation](https://htmlpreview.github.io/?https://github.com/newren/git-filter-repo/blob/docs/html/git-filter-repo.html#EXAMPLES)
+   See the [`git filter-repo` documentation](https://htmlpreview.github.io/?https://github.com/newren/git-filter-repo/blob/docs/html/git-filter-repo.html#EXAMPLES)
    for more examples, and the complete documentation.
 
 1. Force push your changes to overwrite all branches on GitLab.
@@ -81,8 +79,7 @@ unwanted files.
 
 To reduce the size of your repository in GitLab you will need to remove GitLab
 internal refs that reference commits contain large files. Before completing
-these steps, first [purged files from your repository
-history](#purging-files-from-your-repository-history).
+these steps, first [purged files from your repository history](#purging-files-from-your-repository-history).
 
 As well as branches and tags, which are a type of Git ref, GitLab automatically
 creates other refs. These refs prevent dead links to commits, or missing diffs
@@ -97,12 +94,10 @@ fetching faster. The hidden refs to prevent commits with discussion from being
 deleted (`refs/keep-around/*`) cannot be fetched at all. These refs can,
 however, be accessed from the Git bundle inside the project export.
 
-1. [Install `git
-   filter-repo`](https://github.com/newren/git-filter-repo/blob/master/INSTALL.md)
+1. [Install `git filter-repo`](https://github.com/newren/git-filter-repo/blob/master/INSTALL.md)
    using a supported package manager, or from source.
 
-1. Generate a fresh [export the
-   project](../settings/import_export.html#exporting-a-project-and-its-data) and
+1. Generate a fresh [export from the project](../settings/import_export.md#exporting-a-project-and-its-data) and
    download to your computer.
 
 1. Decompress the backup using `tar`
@@ -111,8 +106,7 @@ however, be accessed from the Git bundle inside the project export.
    tar xzf project-backup.tar.gz
    ```
 
-   This will contain a `project.bundle` file, which was created by [`git
-   bundle`](https://git-scm.com/docs/git-bundle)
+   This will contain a `project.bundle` file, which was created by [`git bundle`](https://git-scm.com/docs/git-bundle)
 
 1. Clone a fresh copy of the repository from the bundle.
 
@@ -142,8 +136,7 @@ however, be accessed from the Git bundle inside the project export.
    git filter-repo --path path/to/big/file.m4v --invert-paths
    ```
 
-   See the [`git filter-repo`
-   documentation](https://htmlpreview.github.io/?https://github.com/newren/git-filter-repo/blob/docs/html/git-filter-repo.html#EXAMPLES)
+   See the [`git filter-repo` documentation](https://htmlpreview.github.io/?https://github.com/newren/git-filter-repo/blob/docs/html/git-filter-repo.html#EXAMPLES)
    for more examples, and the complete documentation.
 
 1. After running `git filter-repo`, the header and unchanged commits need to be

doc/user/project/repository/x509_signed_commits/index.md

@@ -65,11 +65,11 @@ git config --global gpg.format x509
 
 ### Windows and MacOS
 
-Install [smimesign](https://github.com/github/smimesign) by downloading the
+Install [S/MIME Sign](https://github.com/github/smimesign) by downloading the
 installer or via `brew install smimesign` on MacOS.
 
 Get the ID of your certificate with `smimesign --list-keys` and set your
-signingkey `git config --global user.signingkey ID`, then configure X.509:
+signing key `git config --global user.signingkey ID`, then configure X.509:
 
 ```shell
 git config --global gpg.x509.program smimesign