Skip to content

L
linux
Commit 0108ae7f authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab
Browse files
Options

media: em28xx: constify most static structs 

There are several em28xx static structs that can now be constified.

That caused a significant reduction at data segment:

Before:
   text	   data	    bss	    dec	    hex	filename
  85017	  59588	    576	 145181	  2371d	drivers/media/usb/em28xx/em28xx.o

After:
   text	   data	    bss	    dec	    hex	filename
 112345	  32292	    576	 145213	  2373d	drivers/media/usb/em28xx/em28xx.o
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent aa62980b
Hide whitespace changes
Inline Side-by-side
Showing with 66 additions and 64 deletions
drivers/media/usb/em28xx/em28xx-cards.c
View file @ 0108ae7f
......@@ -81,26 +81,26 @@ static void em28xx_pre_card_setup(struct em28xx *dev);
*/
/* Reset for the most [analog] boards */
static struct em28xx_reg_seq default_analog[] = {
static const struct em28xx_reg_seq default_analog[] = {
{EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Reset for the most [digital] boards */
static struct em28xx_reg_seq default_digital[] = {
static const struct em28xx_reg_seq default_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Board Hauppauge WinTV HVR 900 analog */
static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
{EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10},
{ 0x05, 0xff, 0x10, 10},
{ -1, -1, -1, -1},
};
/* Board Hauppauge WinTV HVR 900 digital */
static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x04, 0x0f, 10},
{EM2880_R04_GPO, 0x0c, 0x0f, 10},
......@@ -108,14 +108,14 @@ static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
};
/* Board Hauppauge WinTV HVR 900 (R2) digital */
static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
static const struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x0c, 0x0f, 10},
{ -1, -1, -1, -1},
};
/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
static const struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
{EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
......@@ -126,7 +126,7 @@ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
Analog - No input analog */
/* Board - EM2882 Kworld 315U digital */
static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
static const struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
{EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
{EM2880_R04_GPO, 0x04, 0xff, 10},
......@@ -135,7 +135,7 @@ static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
static const struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
{EM2880_R04_GPO, 0x08, 0xff, 10},
{EM2880_R04_GPO, 0x0c, 0xff, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
......@@ -143,13 +143,13 @@ static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq kworld_330u_analog[] = {
static const struct em28xx_reg_seq kworld_330u_analog[] = {
{EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x00, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq kworld_330u_digital[] = {
static const struct em28xx_reg_seq kworld_330u_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{ -1, -1, -1, -1},
......@@ -161,12 +161,12 @@ static struct em28xx_reg_seq kworld_330u_digital[] = {
GPIO4 - xc3028 reset
GOP3 - s5h1409 reset
*/
static struct em28xx_reg_seq evga_indtube_analog[] = {
static const struct em28xx_reg_seq evga_indtube_analog[] = {
{EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq evga_indtube_digital[] = {
static const struct em28xx_reg_seq evga_indtube_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1},
{EM2880_R04_GPO, 0x04, 0xff, 10},
{EM2880_R04_GPO, 0x0c, 0xff, 1},
......@@ -184,12 +184,12 @@ static struct em28xx_reg_seq evga_indtube_digital[] = {
* EM_GPIO_6 - currently unknown
* EM_GPIO_7 - currently unknown
*/
static struct em28xx_reg_seq kworld_a340_digital[] = {
static const struct em28xx_reg_seq kworld_a340_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq kworld_ub435q_v3_digital[] = {
static const struct em28xx_reg_seq kworld_ub435q_v3_digital[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100},
......@@ -198,25 +198,25 @@ static struct em28xx_reg_seq kworld_ub435q_v3_digital[] = {
};
/* Pinnacle Hybrid Pro eb1a:2881 */
static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
static const struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
{EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
static const struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
{EM2880_R04_GPO, 0x0c, 0xff, 1},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
{EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x00, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{ -1, -1, -1, -1},
......@@ -226,7 +226,7 @@ static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
0-5: not used
6: demod reset, active low
7: LED on, active high */
static struct em28xx_reg_seq em2874_pctv_80e_digital[] = {
static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = {
{EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
{EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/
{EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10},
......@@ -236,7 +236,7 @@ static struct em28xx_reg_seq em2874_pctv_80e_digital[] = {
/* eb1a:2868 Reddo DVB-C USB TV Box
GPIO4 - CU1216L NIM
Other GPIOs seems to be don't care. */
static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
static const struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
{EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
......@@ -248,7 +248,7 @@ static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
};
/* Callback for the most boards */
static struct em28xx_reg_seq default_tuner_gpio[] = {
static const struct em28xx_reg_seq default_tuner_gpio[] = {
{EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
{EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10},
{EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
......@@ -256,58 +256,58 @@ static struct em28xx_reg_seq default_tuner_gpio[] = {
};
/* Mute/unmute */
static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
static const struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
{EM2820_R08_GPIO_CTRL, 5, 7, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
static const struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
{EM2820_R08_GPIO_CTRL, 4, 7, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq compro_mute_gpio[] = {
static const struct em28xx_reg_seq compro_mute_gpio[] = {
{EM2820_R08_GPIO_CTRL, 6, 7, 10},
{ -1, -1, -1, -1},
};
/* Terratec AV350 */
static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
static const struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
{EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
static const struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
{EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq silvercrest_reg_seq[] = {
static const struct em28xx_reg_seq silvercrest_reg_seq[] = {
{EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq vc211a_enable[] = {
static const struct em28xx_reg_seq vc211a_enable[] = {
{EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10},
{EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10},
{EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq dikom_dk300_digital[] = {
static const struct em28xx_reg_seq dikom_dk300_digital[] = {
{EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{ -1, -1, -1, -1},
};
/* Reset for the most [digital] boards */
static struct em28xx_reg_seq leadership_digital[] = {
static const struct em28xx_reg_seq leadership_digital[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq leadership_reset[] = {
static const struct em28xx_reg_seq leadership_reset[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
......@@ -318,7 +318,7 @@ static struct em28xx_reg_seq leadership_reset[] = {
* GPIO_6 - demod reset
* GPIO_7 - LED
*/
static struct em28xx_reg_seq pctv_290e[] = {
static const struct em28xx_reg_seq pctv_290e[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80},
{EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
{EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
......@@ -326,7 +326,7 @@ static struct em28xx_reg_seq pctv_290e[] = {
};
#if 0
static struct em28xx_reg_seq terratec_h5_gpio[] = {
static const struct em28xx_reg_seq terratec_h5_gpio[] = {
{EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50},
......@@ -334,7 +334,7 @@ static struct em28xx_reg_seq terratec_h5_gpio[] = {
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_h5_digital[] = {
static const struct em28xx_reg_seq terratec_h5_digital[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
......@@ -352,7 +352,7 @@ static struct em28xx_reg_seq terratec_h5_digital[] = {
* GPIO_6 - RESET_DEM
* GPIO_7 - LED (green LED)
*/
static struct em28xx_reg_seq pctv_460e[] = {
static const struct em28xx_reg_seq pctv_460e[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50},
{ 0x0d, 0xff, 0xff, 50},
{EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */
......@@ -361,7 +361,7 @@ static struct em28xx_reg_seq pctv_460e[] = {
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
static const struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */
{EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35},
......@@ -384,7 +384,7 @@ static struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
* GPIO 6 = #RESET_DEM
* GPIO 7 = P07_LED (green LED)
*/
static struct em28xx_reg_seq pctv_461e[] = {
static const struct em28xx_reg_seq pctv_461e[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0},
{0x0d, 0xff, 0xff, 0},
{EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */
......@@ -396,7 +396,7 @@ static struct em28xx_reg_seq pctv_461e[] = {
};
#if 0
static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
static const struct em28xx_reg_seq hauppauge_930c_gpio[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */
{EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
......@@ -404,7 +404,7 @@ static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq hauppauge_930c_digital[] = {
static const struct em28xx_reg_seq hauppauge_930c_digital[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
......@@ -417,7 +417,7 @@ static struct em28xx_reg_seq hauppauge_930c_digital[] = {
* GPIO_6 - demod reset, 0=active
* GPIO_7 - LED, 0=active
*/
static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
static const struct em28xx_reg_seq maxmedia_ub425_tc[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
{EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
......@@ -430,7 +430,7 @@ static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
* GPIO_6: demod reset, 0=active
* GPIO_7: LED, 1=active
*/
static struct em28xx_reg_seq pctv_510e[] = {
static const struct em28xx_reg_seq pctv_510e[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
{EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
......@@ -443,7 +443,7 @@ static struct em28xx_reg_seq pctv_510e[] = {
* GPIO_6: demod reset, 0=active
* GPIO_7: LED, 1=active
*/
static struct em28xx_reg_seq pctv_520e[] = {
static const struct em28xx_reg_seq pctv_520e[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
{EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
......@@ -460,13 +460,13 @@ static struct em28xx_reg_seq pctv_520e[] = {
* reg 0x81/0x85:
* GPIO_7: snapshot button, 0=pressed, 1=unpressed
*/
static struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = {
static const struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = {
{EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10},
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq pctv_292e[] = {
static const struct em28xx_reg_seq pctv_292e[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
{0x0d, 0xff, 0xff, 950},
{EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100},
......@@ -478,7 +478,7 @@ static struct em28xx_reg_seq pctv_292e[] = {
{-1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_t2_stick_hd[] = {
static const struct em28xx_reg_seq terratec_t2_stick_hd[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
{0x0d, 0xff, 0xff, 600},
{EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
......@@ -492,7 +492,7 @@ static struct em28xx_reg_seq terratec_t2_stick_hd[] = {
{-1, -1, -1, -1},
};
static struct em28xx_reg_seq plex_px_bcud[] = {
static const struct em28xx_reg_seq plex_px_bcud[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
{0x0d, 0xff, 0xff, 0},
{EM2874_R50_IR_CONFIG, 0x01, 0xff, 0},
......@@ -519,7 +519,7 @@ static struct em28xx_reg_seq plex_px_bcud[] = {
* GPIO_5: Reset #2, 0=active
* GPIO_6: Reset #1, 0=active
*/
static struct em28xx_reg_seq hauppauge_dualhd_dvb[] = {
static const struct em28xx_reg_seq hauppauge_dualhd_dvb[] = {
{EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
{0x0d, 0xff, 0xff, 200},
{0x50, 0x04, 0xff, 300},
......@@ -536,7 +536,7 @@ static struct em28xx_reg_seq hauppauge_dualhd_dvb[] = {
/*
* Button definitions
*/
static struct em28xx_button std_snapshot_button[] = {
static const struct em28xx_button std_snapshot_button[] = {
{
.role = EM28XX_BUTTON_SNAPSHOT,
.reg_r = EM28XX_R0C_USBSUSP,
......@@ -547,7 +547,7 @@ static struct em28xx_button std_snapshot_button[] = {
{-1, 0, 0, 0, 0},
};
static struct em28xx_button speedlink_vad_laplace_buttons[] = {
static const struct em28xx_button speedlink_vad_laplace_buttons[] = {
{
.role = EM28XX_BUTTON_SNAPSHOT,
.reg_r = EM2874_R85_GPIO_P1_STATE,
......@@ -631,7 +631,7 @@ static struct em28xx_led hauppauge_dualhd_leds[] = {
/*
* Board definitions
*/
struct em28xx_board em28xx_boards[] = {
const struct em28xx_board em28xx_boards[] = {
[EM2750_BOARD_UNKNOWN] = {
.name = "EM2710/EM2750/EM2751 webcam grabber",
.xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
......@@ -2642,7 +2642,7 @@ MODULE_DEVICE_TABLE(usb, em28xx_id_table);
/*
* EEPROM hash table for devices with generic USB IDs
*/
static struct em28xx_hash_table em28xx_eeprom_hash[] = {
static const struct em28xx_hash_table em28xx_eeprom_hash[] = {
/* P/N: SA 60002070465 Tuner: TVF7533-MF */
{0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
{0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
......@@ -2655,7 +2655,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = {
};
/* I2C devicelist hash table for devices with generic USB IDs */
static struct em28xx_hash_table em28xx_i2c_hash[] = {
static const struct em28xx_hash_table em28xx_i2c_hash[] = {
{0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
{0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
{0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
......@@ -2687,7 +2687,7 @@ EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev)
{
struct em28xx_board *board = &em28xx_boards[dev->model];
const struct em28xx_board *board = &em28xx_boards[dev->model];
u8 xclk = board->xclk, i2c_speed = board->i2c_speed;
/* Those are the default values for the majority of boards
......
drivers/media/usb/em28xx/em28xx-core.c
View file @ 0108ae7f
......@@ -712,7 +712,7 @@ int em28xx_capture_start(struct em28xx *dev, int start)
return rc;
}
int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio)
int em28xx_gpio_set(struct em28xx *dev, const struct em28xx_reg_seq *gpio)
{
int rc = 0;
......
drivers/media/usb/em28xx/em28xx-input.c
View file @ 0108ae7f
......@@ -515,7 +515,8 @@ static void em28xx_query_buttons(struct work_struct *work)
j = 0;
while (dev->board.buttons[j].role >= 0 &&
dev->board.buttons[j].role < EM28XX_NUM_BUTTON_ROLES) {
struct em28xx_button *button = &dev->board.buttons[j];
const struct em28xx_button *button = &dev->board.buttons[j];
/* Check if button uses the current address */
if (button->reg_r != dev->button_polling_addresses[i]) {
j++;
......@@ -618,7 +619,8 @@ static void em28xx_init_buttons(struct em28xx *dev)
dev->button_polling_interval = EM28XX_BUTTONS_DEBOUNCED_QUERY_INTERVAL;
while (dev->board.buttons[i].role >= 0 &&
dev->board.buttons[i].role < EM28XX_NUM_BUTTON_ROLES) {
struct em28xx_button *button = &dev->board.buttons[i];
const struct em28xx_button *button = &dev->board.buttons[i];
/* Check if polling address is already on the list */
addr_new = true;
for (j = 0; j < dev->num_button_polling_addresses; j++) {
......
drivers/media/usb/em28xx/em28xx.h
View file @ 0108ae7f
......@@ -386,7 +386,7 @@ struct em28xx_input {
unsigned int vmux;
enum em28xx_amux amux;
enum em28xx_aout aout;
struct em28xx_reg_seq *gpio;
const struct em28xx_reg_seq *gpio;
};
#define INPUT(nr) (&em28xx_boards[dev->model].input[nr])
......@@ -450,10 +450,10 @@ struct em28xx_board {
unsigned int tda9887_conf;
/* GPIO sequences */
struct em28xx_reg_seq *dvb_gpio;
struct em28xx_reg_seq *suspend_gpio;
struct em28xx_reg_seq *tuner_gpio;
struct em28xx_reg_seq *mute_gpio;
const struct em28xx_reg_seq *dvb_gpio;
const struct em28xx_reg_seq *suspend_gpio;
const struct em28xx_reg_seq *tuner_gpio;
const struct em28xx_reg_seq *mute_gpio;
unsigned int is_em2800:1;
unsigned int has_msp34xx:1;
......@@ -480,7 +480,7 @@ struct em28xx_board {
struct em28xx_led *leds;
/* Buttons */
struct em28xx_button *buttons;
const struct em28xx_button *buttons;
};
struct em28xx_eeprom {
......@@ -792,7 +792,7 @@ int em28xx_init_usb_xfer(struct em28xx *dev, enum em28xx_mode mode,
void em28xx_uninit_usb_xfer(struct em28xx *dev, enum em28xx_mode mode);
void em28xx_stop_urbs(struct em28xx *dev);
int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode);
int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio);
int em28xx_gpio_set(struct em28xx *dev, const struct em28xx_reg_seq *gpio);
int em28xx_register_extension(struct em28xx_ops *dev);
void em28xx_unregister_extension(struct em28xx_ops *dev);
void em28xx_init_extension(struct em28xx *dev);
......@@ -801,7 +801,7 @@ int em28xx_suspend_extension(struct em28xx *dev);
int em28xx_resume_extension(struct em28xx *dev);
/* Provided by em28xx-cards.c */
extern struct em28xx_board em28xx_boards[];
extern const struct em28xx_board em28xx_boards[];
extern struct usb_device_id em28xx_id_table[];
int em28xx_tuner_callback(void *ptr, int component, int command, int arg);
void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7