staging: comedi: s526: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/s526.c

@@ -420,15 +420,28 @@ static int s526_ai_insn_config(struct comedi_device *dev,
 	return result;
 }
 
+static int s526_ai_eoc(struct comedi_device *dev,
+		       struct comedi_subdevice *s,
+		       struct comedi_insn *insn,
+		       unsigned long context)
+{
+	unsigned int status;
+
+	status = inw(dev->iobase + REG_ISR);
+	if (status & ISR_ADC_DONE)
+		return 0;
+	return -EBUSY;
+}
+
 static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 			 struct comedi_insn *insn, unsigned int *data)
 {
 	struct s526_private *devpriv = dev->private;
 	unsigned int chan = CR_CHAN(insn->chanspec);
-	int n, i;
+	int n;
 	unsigned short value;
 	unsigned int d;
-	unsigned int status;
+	int ret;
 
 	/* Set configured delay, enable channel for this channel only,
 	 * select "ADC read" channel, set "ADC start" bit. */
@@ -440,17 +453,12 @@ static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 		/* trigger conversion */
 		outw(value, dev->iobase + REG_ADC);
 
-#define TIMEOUT 100
 		/* wait for conversion to end */
-		for (i = 0; i < TIMEOUT; i++) {
-			status = inw(dev->iobase + REG_ISR);
-			if (status & ISR_ADC_DONE) {
+		ret = comedi_timeout(dev, s, insn, s526_ai_eoc, 0);
+		if (ret)
+			return ret;
+
 		outw(ISR_ADC_DONE, dev->iobase + REG_ISR);
-				break;
-			}
-		}
-		if (i == TIMEOUT)
-			return -ETIMEDOUT;
 
 		/* read data */
 		d = inw(dev->iobase + REG_ADD);