Commit 0655d7c3 authored by Thomas Gleixner's avatar Thomas Gleixner Committed by Linus Torvalds

x86: share hpet.h with i386

hpet.h in asm-i386 and asm-x86_64 contain tons of duplicated stuff.
Consolidate into one shared header file.

AK: Fix i386 compilation with !X86_IO_APIC
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarChris Wright <chrisw@sous-sol.org>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
Signed-off-by: default avatarAndi Kleen <ak@suse.de>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent aec8148f
...@@ -5,6 +5,7 @@ ...@@ -5,6 +5,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/sysdev.h> #include <linux/sysdev.h>
#include <linux/pm.h> #include <linux/pm.h>
#include <linux/delay.h>
#include <asm/hpet.h> #include <asm/hpet.h>
#include <asm/io.h> #include <asm/io.h>
......
...@@ -4,30 +4,6 @@ ...@@ -4,30 +4,6 @@
#ifdef CONFIG_HPET_TIMER #ifdef CONFIG_HPET_TIMER
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/irq.h>
#include <asm/msr.h>
#include <asm/delay.h>
#include <asm/mpspec.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
#include <linux/timex.h>
/* /*
* Documentation on HPET can be found at: * Documentation on HPET can be found at:
* http://www.intel.com/ial/home/sp/pcmmspec.htm * http://www.intel.com/ial/home/sp/pcmmspec.htm
...@@ -51,65 +27,59 @@ ...@@ -51,65 +27,59 @@
#define HPET_T2_CMP 0x148 #define HPET_T2_CMP 0x148
#define HPET_T2_ROUTE 0x150 #define HPET_T2_ROUTE 0x150
#define HPET_ID_LEGSUP 0x00008000
#define HPET_ID_NUMBER 0x00001f00
#define HPET_ID_REV 0x000000ff #define HPET_ID_REV 0x000000ff
#define HPET_ID_NUMBER 0x00001f00
#define HPET_ID_64BIT 0x00002000
#define HPET_ID_LEGSUP 0x00008000
#define HPET_ID_VENDOR 0xffff0000
#define HPET_ID_NUMBER_SHIFT 8 #define HPET_ID_NUMBER_SHIFT 8
#define HPET_ID_VENDOR_SHIFT 16
#define HPET_ID_VENDOR_8086 0x8086
#define HPET_CFG_ENABLE 0x001 #define HPET_CFG_ENABLE 0x001
#define HPET_CFG_LEGACY 0x002 #define HPET_CFG_LEGACY 0x002
#define HPET_LEGACY_8254 2 #define HPET_LEGACY_8254 2
#define HPET_LEGACY_RTC 8 #define HPET_LEGACY_RTC 8
#define HPET_TN_ENABLE 0x004 #define HPET_TN_LEVEL 0x0002
#define HPET_TN_PERIODIC 0x008 #define HPET_TN_ENABLE 0x0004
#define HPET_TN_PERIODIC_CAP 0x010 #define HPET_TN_PERIODIC 0x0008
#define HPET_TN_SETVAL 0x040 #define HPET_TN_PERIODIC_CAP 0x0010
#define HPET_TN_32BIT 0x100 #define HPET_TN_64BIT_CAP 0x0020
#define HPET_TN_SETVAL 0x0040
/* Use our own asm for 64 bit multiply/divide */ #define HPET_TN_32BIT 0x0100
#define ASM_MUL64_REG(eax_out,edx_out,reg_in,eax_in) \ #define HPET_TN_ROUTE 0x3e00
__asm__ __volatile__("mull %2" \ #define HPET_TN_FSB 0x4000
:"=a" (eax_out), "=d" (edx_out) \ #define HPET_TN_FSB_CAP 0x8000
:"r" (reg_in), "0" (eax_in)) #define HPET_TN_ROUTE_SHIFT 9
#define ASM_DIV64_REG(eax_out,edx_out,reg_in,eax_in,edx_in) \
__asm__ __volatile__("divl %2" \
:"=a" (eax_out), "=d" (edx_out) \
:"r" (reg_in), "0" (eax_in), "1" (edx_in))
#define KERNEL_TICK_USEC (1000000UL/HZ) /* tick value in microsec */
/* Max HPET Period is 10^8 femto sec as in HPET spec */ /* Max HPET Period is 10^8 femto sec as in HPET spec */
#define HPET_MAX_PERIOD (100000000UL) #define HPET_MAX_PERIOD 100000000UL
/* /*
* Min HPET period is 10^5 femto sec just for safety. If it is less than this, * Min HPET period is 10^5 femto sec just for safety. If it is less than this,
* then 32 bit HPET counter wrapsaround in less than 0.5 sec. * then 32 bit HPET counter wrapsaround in less than 0.5 sec.
*/ */
#define HPET_MIN_PERIOD (100000UL) #define HPET_MIN_PERIOD 100000UL
#define HPET_TICK_RATE (HZ * 100000UL)
extern unsigned long hpet_address; /* hpet memory map physical address */ /* hpet memory map physical address */
extern unsigned long hpet_address;
extern int is_hpet_enabled(void); extern int is_hpet_enabled(void);
#ifdef CONFIG_X86_64
extern unsigned long hpet_tick; /* hpet clks count per tick */
extern int hpet_use_timer;
extern int hpet_rtc_timer_init(void);
extern int hpet_enable(void);
extern int is_hpet_capable(void);
extern int hpet_readl(unsigned long a);
#else
extern int hpet_enable(void); extern int hpet_enable(void);
#endif
#ifdef CONFIG_HPET_EMULATE_RTC #ifdef CONFIG_HPET_EMULATE_RTC
#include <linux/interrupt.h>
extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask); extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
extern int hpet_set_rtc_irq_bit(unsigned long bit_mask); extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec); extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min,
unsigned char sec);
extern int hpet_set_periodic_freq(unsigned long freq); extern int hpet_set_periodic_freq(unsigned long freq);
extern int hpet_rtc_dropped_irq(void); extern int hpet_rtc_dropped_irq(void);
extern int hpet_rtc_timer_init(void); extern int hpet_rtc_timer_init(void);
extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id); extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
#endif /* CONFIG_HPET_EMULATE_RTC */ #endif /* CONFIG_HPET_EMULATE_RTC */
#else #else
......
#ifndef _ASM_X8664_HPET_H #ifndef _ASM_X8664_HPET_H
#define _ASM_X8664_HPET_H 1 #define _ASM_X8664_HPET_H 1
/* #include <asm-i386/hpet.h>
* Documentation on HPET can be found at:
* http://www.intel.com/ial/home/sp/pcmmspec.htm
* ftp://download.intel.com/ial/home/sp/mmts098.pdf
*/
#define HPET_MMAP_SIZE 1024
#define HPET_ID 0x000
#define HPET_PERIOD 0x004
#define HPET_CFG 0x010
#define HPET_STATUS 0x020
#define HPET_COUNTER 0x0f0
#define HPET_Tn_OFFSET 0x20
#define HPET_Tn_CFG(n) (0x100 + (n) * HPET_Tn_OFFSET)
#define HPET_Tn_ROUTE(n) (0x104 + (n) * HPET_Tn_OFFSET)
#define HPET_Tn_CMP(n) (0x108 + (n) * HPET_Tn_OFFSET)
#define HPET_T0_CFG HPET_Tn_CFG(0)
#define HPET_T0_CMP HPET_Tn_CMP(0)
#define HPET_T1_CFG HPET_Tn_CFG(1)
#define HPET_T1_CMP HPET_Tn_CMP(1)
#define HPET_ID_VENDOR 0xffff0000
#define HPET_ID_LEGSUP 0x00008000
#define HPET_ID_64BIT 0x00002000
#define HPET_ID_NUMBER 0x00001f00
#define HPET_ID_REV 0x000000ff
#define HPET_ID_NUMBER_SHIFT 8
#define HPET_ID_VENDOR_SHIFT 16
#define HPET_ID_VENDOR_8086 0x8086
#define HPET_CFG_ENABLE 0x001
#define HPET_CFG_LEGACY 0x002
#define HPET_LEGACY_8254 2
#define HPET_LEGACY_RTC 8
#define HPET_TN_LEVEL 0x0002
#define HPET_TN_ENABLE 0x0004
#define HPET_TN_PERIODIC 0x0008
#define HPET_TN_PERIODIC_CAP 0x0010
#define HPET_TN_64BIT_CAP 0x0020
#define HPET_TN_SETVAL 0x0040
#define HPET_TN_32BIT 0x0100
#define HPET_TN_ROUTE 0x3e00
#define HPET_TN_FSB 0x4000
#define HPET_TN_FSB_CAP 0x8000
#define HPET_TN_ROUTE_SHIFT 9
#define HPET_TICK_RATE (HZ * 100000UL) #define HPET_TICK_RATE (HZ * 100000UL)
extern int is_hpet_enabled(void);
extern int hpet_rtc_timer_init(void); extern int hpet_rtc_timer_init(void);
extern int hpet_arch_init(void); extern int hpet_arch_init(void);
extern int hpet_timer_stop_set_go(unsigned long tick); extern int hpet_timer_stop_set_go(unsigned long tick);
...@@ -61,17 +12,7 @@ extern int hpet_reenable(void); ...@@ -61,17 +12,7 @@ extern int hpet_reenable(void);
extern unsigned int hpet_calibrate_tsc(void); extern unsigned int hpet_calibrate_tsc(void);
extern int hpet_use_timer; extern int hpet_use_timer;
extern unsigned long hpet_address;
extern unsigned long hpet_period; extern unsigned long hpet_period;
extern unsigned long hpet_tick; extern unsigned long hpet_tick;
#ifdef CONFIG_HPET_EMULATE_RTC
extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec);
extern int hpet_set_periodic_freq(unsigned long freq);
extern int hpet_rtc_dropped_irq(void);
extern int hpet_rtc_timer_init(void);
#endif /* CONFIG_HPET_EMULATE_RTC */
#endif #endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment