Commit 06bf27dd authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Staging: remove me4000 driver.

The comedi drivers should be used instead, no need to have
this driver in the tree duplicating that one.

Cc: Wolfgang Beiter <w.beiter@aon.at>
Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent c2f5e9d2
...@@ -47,8 +47,6 @@ source "drivers/staging/slicoss/Kconfig" ...@@ -47,8 +47,6 @@ source "drivers/staging/slicoss/Kconfig"
source "drivers/staging/sxg/Kconfig" source "drivers/staging/sxg/Kconfig"
source "drivers/staging/me4000/Kconfig"
source "drivers/staging/meilhaus/Kconfig" source "drivers/staging/meilhaus/Kconfig"
source "drivers/staging/go7007/Kconfig" source "drivers/staging/go7007/Kconfig"
......
...@@ -6,7 +6,6 @@ obj-$(CONFIG_STAGING) += staging.o ...@@ -6,7 +6,6 @@ obj-$(CONFIG_STAGING) += staging.o
obj-$(CONFIG_ET131X) += et131x/ obj-$(CONFIG_ET131X) += et131x/
obj-$(CONFIG_SLICOSS) += slicoss/ obj-$(CONFIG_SLICOSS) += slicoss/
obj-$(CONFIG_SXG) += sxg/ obj-$(CONFIG_SXG) += sxg/
obj-$(CONFIG_ME4000) += me4000/
obj-$(CONFIG_MEILHAUS) += meilhaus/ obj-$(CONFIG_MEILHAUS) += meilhaus/
obj-$(CONFIG_VIDEO_GO7007) += go7007/ obj-$(CONFIG_VIDEO_GO7007) += go7007/
obj-$(CONFIG_USB_IP_COMMON) += usbip/ obj-$(CONFIG_USB_IP_COMMON) += usbip/
......
config ME4000
tristate "Meilhaus ME-4000 support"
default n
depends on PCI
help
This driver supports the Meilhaus ME-4000 family of boards
that do data collection and multipurpose I/O.
To compile this driver as a module, choose M here: the module
will be called me4000.
obj-$(CONFIG_ME4000) += me4000.o
TODO:
- checkpatch.pl cleanups
- sparse cleanups
- possible /proc interaction cleanups
- more info needed for Kconfig entry
- real device id?
- module parameter cleanup
Please send patches to Greg Kroah-Hartman <gregkh@suse.de>
and Cc: Wolfgang Beiter <w.beiter@aon.at> and
Guenter Gebhardt <g.gebhardt@meilhaus.de>
This source diff could not be displayed because it is too large. You can view the blob instead.
/*
* Copyright (C) 2003 Meilhaus Electronic GmbH (support@meilhaus.de)
*
* Source File : me4000.h
* Author : GG (Guenter Gebhardt) <g.gebhardt@meilhaus.de>
*/
#ifndef _ME4000_H_
#define _ME4000_H_
#ifdef __KERNEL__
/*=============================================================================
The version of the driver release
===========================================================================*/
#define ME4000_DRIVER_VERSION 0x10009 // Version 1.00.09
/*=============================================================================
Debug section
===========================================================================*/
#undef ME4000_CALL_DEBUG // Debug function entry and exit
#undef ME4000_ISR_DEBUG // Debug the interrupt service routine
#undef ME4000_PORT_DEBUG // Debug port access
#undef ME4000_DEBUG // General purpose debug masseges
#ifdef ME4000_CALL_DEBUG
#undef CALL_PDEBUG
#define CALL_PDEBUG(fmt, args...) printk(KERN_DEBUG"ME4000:" fmt, ##args)
#else
# define CALL_PDEBUG(fmt, args...) // no debugging, do nothing
#endif
#ifdef ME4000_ISR_DEBUG
#undef ISR_PDEBUG
#define ISR_PDEBUG(fmt, args...) printk(KERN_DEBUG"ME4000:" fmt, ##args)
#else
#define ISR_PDEBUG(fmt, args...) // no debugging, do nothing
#endif
#ifdef ME4000_PORT_DEBUG
#undef PORT_PDEBUG
#define PORT_PDEBUG(fmt, args...) printk(KERN_DEBUG"ME4000:" fmt, ##args)
#else
#define PORT_PDEBUG(fmt, args...) // no debugging, do nothing
#endif
#ifdef ME4000_DEBUG
#undef PDEBUG
#define PDEBUG(fmt, args...) printk(KERN_DEBUG"ME4000:" fmt, ##args)
#else
#define PDEBUG(fmt, args...) // no debugging, do nothing
#endif
/*=============================================================================
PCI vendor and device IDs
===========================================================================*/
#define PCI_VENDOR_ID_MEILHAUS 0x1402
#define PCI_DEVICE_ID_MEILHAUS_ME4650 0x4650 // Low Cost version
#define PCI_DEVICE_ID_MEILHAUS_ME4660 0x4660 // Standard version
#define PCI_DEVICE_ID_MEILHAUS_ME4660I 0x4661 // Isolated version
#define PCI_DEVICE_ID_MEILHAUS_ME4660S 0x4662 // Standard version with Sample and Hold
#define PCI_DEVICE_ID_MEILHAUS_ME4660IS 0x4663 // Isolated version with Sample and Hold
#define PCI_DEVICE_ID_MEILHAUS_ME4670 0x4670 // Standard version
#define PCI_DEVICE_ID_MEILHAUS_ME4670I 0x4671 // Isolated version
#define PCI_DEVICE_ID_MEILHAUS_ME4670S 0x4672 // Standard version with Sample and Hold
#define PCI_DEVICE_ID_MEILHAUS_ME4670IS 0x4673 // Isolated version with Sample and Hold
#define PCI_DEVICE_ID_MEILHAUS_ME4680 0x4680 // Standard version
#define PCI_DEVICE_ID_MEILHAUS_ME4680I 0x4681 // Isolated version
#define PCI_DEVICE_ID_MEILHAUS_ME4680S 0x4682 // Standard version with Sample and Hold
#define PCI_DEVICE_ID_MEILHAUS_ME4680IS 0x4683 // Isolated version with Sample and Hold
/*=============================================================================
Device names, for entries in /proc/..
===========================================================================*/
#define ME4000_NAME "me4000"
#define ME4000_AO_NAME "me4000_ao"
#define ME4000_AI_NAME "me4000_ai"
#define ME4000_DIO_NAME "me4000_dio"
#define ME4000_CNT_NAME "me4000_cnt"
#define ME4000_EXT_INT_NAME "me4000_ext_int"
/*=============================================================================
ME-4000 base register offsets
===========================================================================*/
#define ME4000_AO_00_CTRL_REG 0x00 // R/W
#define ME4000_AO_00_STATUS_REG 0x04 // R/_
#define ME4000_AO_00_FIFO_REG 0x08 // _/W
#define ME4000_AO_00_SINGLE_REG 0x0C // R/W
#define ME4000_AO_00_TIMER_REG 0x10 // _/W
#define ME4000_AO_01_CTRL_REG 0x18 // R/W
#define ME4000_AO_01_STATUS_REG 0x1C // R/_
#define ME4000_AO_01_FIFO_REG 0x20 // _/W
#define ME4000_AO_01_SINGLE_REG 0x24 // R/W
#define ME4000_AO_01_TIMER_REG 0x28 // _/W
#define ME4000_AO_02_CTRL_REG 0x30 // R/W
#define ME4000_AO_02_STATUS_REG 0x34 // R/_
#define ME4000_AO_02_FIFO_REG 0x38 // _/W
#define ME4000_AO_02_SINGLE_REG 0x3C // R/W
#define ME4000_AO_02_TIMER_REG 0x40 // _/W
#define ME4000_AO_03_CTRL_REG 0x48 // R/W
#define ME4000_AO_03_STATUS_REG 0x4C // R/_
#define ME4000_AO_03_FIFO_REG 0x50 // _/W
#define ME4000_AO_03_SINGLE_REG 0x54 // R/W
#define ME4000_AO_03_TIMER_REG 0x58 // _/W
#define ME4000_AI_CTRL_REG 0x74 // _/W
#define ME4000_AI_STATUS_REG 0x74 // R/_
#define ME4000_AI_CHANNEL_LIST_REG 0x78 // _/W
#define ME4000_AI_DATA_REG 0x7C // R/_
#define ME4000_AI_CHAN_TIMER_REG 0x80 // _/W
#define ME4000_AI_CHAN_PRE_TIMER_REG 0x84 // _/W
#define ME4000_AI_SCAN_TIMER_LOW_REG 0x88 // _/W
#define ME4000_AI_SCAN_TIMER_HIGH_REG 0x8C // _/W
#define ME4000_AI_SCAN_PRE_TIMER_LOW_REG 0x90 // _/W
#define ME4000_AI_SCAN_PRE_TIMER_HIGH_REG 0x94 // _/W
#define ME4000_AI_START_REG 0x98 // R/_
#define ME4000_IRQ_STATUS_REG 0x9C // R/_
#define ME4000_DIO_PORT_0_REG 0xA0 // R/W
#define ME4000_DIO_PORT_1_REG 0xA4 // R/W
#define ME4000_DIO_PORT_2_REG 0xA8 // R/W
#define ME4000_DIO_PORT_3_REG 0xAC // R/W
#define ME4000_DIO_DIR_REG 0xB0 // R/W
#define ME4000_AO_LOADSETREG_XX 0xB4 // R/W
#define ME4000_DIO_CTRL_REG 0xB8 // R/W
#define ME4000_AO_DEMUX_ADJUST_REG 0xBC // -/W
#define ME4000_AI_SAMPLE_COUNTER_REG 0xC0 // _/W
/*=============================================================================
Value to adjust Demux
===========================================================================*/
#define ME4000_AO_DEMUX_ADJUST_VALUE 0x4C
/*=============================================================================
Counter base register offsets
===========================================================================*/
#define ME4000_CNT_COUNTER_0_REG 0x00
#define ME4000_CNT_COUNTER_1_REG 0x01
#define ME4000_CNT_COUNTER_2_REG 0x02
#define ME4000_CNT_CTRL_REG 0x03
/*=============================================================================
PLX base register offsets
===========================================================================*/
#define PLX_INTCSR 0x4C // Interrupt control and status register
#define PLX_ICR 0x50 // Initialization control register
/*=============================================================================
Bits for the PLX_ICSR register
===========================================================================*/
#define PLX_INTCSR_LOCAL_INT1_EN 0x01 // If set, local interrupt 1 is enabled (r/w)
#define PLX_INTCSR_LOCAL_INT1_POL 0x02 // If set, local interrupt 1 polarity is active high (r/w)
#define PLX_INTCSR_LOCAL_INT1_STATE 0x04 // If set, local interrupt 1 is active (r/_)
#define PLX_INTCSR_LOCAL_INT2_EN 0x08 // If set, local interrupt 2 is enabled (r/w)
#define PLX_INTCSR_LOCAL_INT2_POL 0x10 // If set, local interrupt 2 polarity is active high (r/w)
#define PLX_INTCSR_LOCAL_INT2_STATE 0x20 // If set, local interrupt 2 is active (r/_)
#define PLX_INTCSR_PCI_INT_EN 0x40 // If set, PCI interrupt is enabled (r/w)
#define PLX_INTCSR_SOFT_INT 0x80 // If set, a software interrupt is generated (r/w)
/*=============================================================================
Bits for the PLX_ICR register
===========================================================================*/
#define PLX_ICR_BIT_EEPROM_CLOCK_SET 0x01000000
#define PLX_ICR_BIT_EEPROM_CHIP_SELECT 0x02000000
#define PLX_ICR_BIT_EEPROM_WRITE 0x04000000
#define PLX_ICR_BIT_EEPROM_READ 0x08000000
#define PLX_ICR_BIT_EEPROM_VALID 0x10000000
#define PLX_ICR_MASK_EEPROM 0x1F000000
#define EEPROM_DELAY 1
/*=============================================================================
Bits for the ME4000_AO_CTRL_REG register
===========================================================================*/
#define ME4000_AO_CTRL_BIT_MODE_0 0x001
#define ME4000_AO_CTRL_BIT_MODE_1 0x002
#define ME4000_AO_CTRL_MASK_MODE 0x003
#define ME4000_AO_CTRL_BIT_STOP 0x004
#define ME4000_AO_CTRL_BIT_ENABLE_FIFO 0x008
#define ME4000_AO_CTRL_BIT_ENABLE_EX_TRIG 0x010
#define ME4000_AO_CTRL_BIT_EX_TRIG_EDGE 0x020
#define ME4000_AO_CTRL_BIT_IMMEDIATE_STOP 0x080
#define ME4000_AO_CTRL_BIT_ENABLE_DO 0x100
#define ME4000_AO_CTRL_BIT_ENABLE_IRQ 0x200
#define ME4000_AO_CTRL_BIT_RESET_IRQ 0x400
#define ME4000_AO_CTRL_BIT_EX_TRIG_BOTH 0x800
/*=============================================================================
Bits for the ME4000_AO_STATUS_REG register
===========================================================================*/
#define ME4000_AO_STATUS_BIT_FSM 0x01
#define ME4000_AO_STATUS_BIT_FF 0x02
#define ME4000_AO_STATUS_BIT_HF 0x04
#define ME4000_AO_STATUS_BIT_EF 0x08
/*=============================================================================
Bits for the ME4000_AI_CTRL_REG register
===========================================================================*/
#define ME4000_AI_CTRL_BIT_MODE_0 0x00000001
#define ME4000_AI_CTRL_BIT_MODE_1 0x00000002
#define ME4000_AI_CTRL_BIT_MODE_2 0x00000004
#define ME4000_AI_CTRL_BIT_SAMPLE_HOLD 0x00000008
#define ME4000_AI_CTRL_BIT_IMMEDIATE_STOP 0x00000010
#define ME4000_AI_CTRL_BIT_STOP 0x00000020
#define ME4000_AI_CTRL_BIT_CHANNEL_FIFO 0x00000040
#define ME4000_AI_CTRL_BIT_DATA_FIFO 0x00000080
#define ME4000_AI_CTRL_BIT_FULLSCALE 0x00000100
#define ME4000_AI_CTRL_BIT_OFFSET 0x00000200
#define ME4000_AI_CTRL_BIT_EX_TRIG_ANALOG 0x00000400
#define ME4000_AI_CTRL_BIT_EX_TRIG 0x00000800
#define ME4000_AI_CTRL_BIT_EX_TRIG_FALLING 0x00001000
#define ME4000_AI_CTRL_BIT_EX_IRQ 0x00002000
#define ME4000_AI_CTRL_BIT_EX_IRQ_RESET 0x00004000
#define ME4000_AI_CTRL_BIT_LE_IRQ 0x00008000
#define ME4000_AI_CTRL_BIT_LE_IRQ_RESET 0x00010000
#define ME4000_AI_CTRL_BIT_HF_IRQ 0x00020000
#define ME4000_AI_CTRL_BIT_HF_IRQ_RESET 0x00040000
#define ME4000_AI_CTRL_BIT_SC_IRQ 0x00080000
#define ME4000_AI_CTRL_BIT_SC_IRQ_RESET 0x00100000
#define ME4000_AI_CTRL_BIT_SC_RELOAD 0x00200000
#define ME4000_AI_CTRL_BIT_EX_TRIG_BOTH 0x80000000
/*=============================================================================
Bits for the ME4000_AI_STATUS_REG register
===========================================================================*/
#define ME4000_AI_STATUS_BIT_EF_CHANNEL 0x00400000
#define ME4000_AI_STATUS_BIT_HF_CHANNEL 0x00800000
#define ME4000_AI_STATUS_BIT_FF_CHANNEL 0x01000000
#define ME4000_AI_STATUS_BIT_EF_DATA 0x02000000
#define ME4000_AI_STATUS_BIT_HF_DATA 0x04000000
#define ME4000_AI_STATUS_BIT_FF_DATA 0x08000000
#define ME4000_AI_STATUS_BIT_LE 0x10000000
#define ME4000_AI_STATUS_BIT_FSM 0x20000000
/*=============================================================================
Bits for the ME4000_IRQ_STATUS_REG register
===========================================================================*/
#define ME4000_IRQ_STATUS_BIT_EX 0x01
#define ME4000_IRQ_STATUS_BIT_LE 0x02
#define ME4000_IRQ_STATUS_BIT_AI_HF 0x04
#define ME4000_IRQ_STATUS_BIT_AO_0_HF 0x08
#define ME4000_IRQ_STATUS_BIT_AO_1_HF 0x10
#define ME4000_IRQ_STATUS_BIT_AO_2_HF 0x20
#define ME4000_IRQ_STATUS_BIT_AO_3_HF 0x40
#define ME4000_IRQ_STATUS_BIT_SC 0x80
/*=============================================================================
Bits for the ME4000_DIO_CTRL_REG register
===========================================================================*/
#define ME4000_DIO_CTRL_BIT_MODE_0 0X0001
#define ME4000_DIO_CTRL_BIT_MODE_1 0X0002
#define ME4000_DIO_CTRL_BIT_MODE_2 0X0004
#define ME4000_DIO_CTRL_BIT_MODE_3 0X0008
#define ME4000_DIO_CTRL_BIT_MODE_4 0X0010
#define ME4000_DIO_CTRL_BIT_MODE_5 0X0020
#define ME4000_DIO_CTRL_BIT_MODE_6 0X0040
#define ME4000_DIO_CTRL_BIT_MODE_7 0X0080
#define ME4000_DIO_CTRL_BIT_FUNCTION_0 0X0100
#define ME4000_DIO_CTRL_BIT_FUNCTION_1 0X0200
#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_0 0X0400
#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_1 0X0800
#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_2 0X1000
#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_3 0X2000
/*=============================================================================
Bits for the ME4000_CNT_CTRL_REG register
===========================================================================*/
#define ME4000_CNT_CTRL_BIT_COUNTER_0 0x00
#define ME4000_CNT_CTRL_BIT_COUNTER_1 0x40
#define ME4000_CNT_CTRL_BIT_COUNTER_2 0x80
#define ME4000_CNT_CTRL_BIT_MODE_0 0x00 // Change state if zero crossing
#define ME4000_CNT_CTRL_BIT_MODE_1 0x02 // Retriggerable One-Shot
#define ME4000_CNT_CTRL_BIT_MODE_2 0x04 // Asymmetrical divider
#define ME4000_CNT_CTRL_BIT_MODE_3 0x06 // Symmetrical divider
#define ME4000_CNT_CTRL_BIT_MODE_4 0x08 // Counter start by software trigger
#define ME4000_CNT_CTRL_BIT_MODE_5 0x0A // Counter start by hardware trigger
/*=============================================================================
Extract information from minor device number
===========================================================================*/
#define AO_BOARD(dev) ((MINOR(dev) >> 6) & 0x3)
#define AO_PORT(dev) ((MINOR(dev) >> 2) & 0xF)
#define AO_MODE(dev) (MINOR(dev) & 0x3)
#define AI_BOARD(dev) ((MINOR(dev) >> 3) & 0x1F)
#define AI_MODE(dev) (MINOR(dev) & 0x7)
#define DIO_BOARD(dev) (MINOR(dev))
#define CNT_BOARD(dev) (MINOR(dev))
#define EXT_INT_BOARD(dev) (MINOR(dev))
/*=============================================================================
Circular buffer used for analog input/output reads/writes.
===========================================================================*/
struct me4000_circ_buf {
s16 *buf;
int volatile head;
int volatile tail;
};
/*=============================================================================
Information about the hardware capabilities
===========================================================================*/
struct me4000_ao_info {
int count;
int fifo_count;
};
struct me4000_ai_info {
int count;
int sh_count;
int diff_count;
int ex_trig_analog;
};
struct me4000_dio_info {
int count;
};
struct me4000_cnt_info {
int count;
};
struct me4000_board {
u16 vendor_id;
u16 device_id;
struct me4000_ao_info ao;
struct me4000_ai_info ai;
struct me4000_dio_info dio;
struct me4000_cnt_info cnt;
};
static struct me4000_board me4000_boards[] = {
{PCI_VENDOR_ID_MEILHAUS, 0x4610, {0, 0}, {16, 0, 0, 0}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4650, {0, 0}, {16, 0, 0, 0}, {4}, {0}},
{PCI_VENDOR_ID_MEILHAUS, 0x4660, {2, 0}, {16, 0, 0, 0}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4661, {2, 0}, {16, 0, 0, 0}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4662, {2, 0}, {16, 8, 0, 0}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4663, {2, 0}, {16, 8, 0, 0}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4670, {4, 0}, {32, 0, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4671, {4, 0}, {32, 0, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4672, {4, 0}, {32, 8, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4673, {4, 0}, {32, 8, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4680, {4, 4}, {32, 0, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4681, {4, 4}, {32, 0, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4682, {4, 4}, {32, 8, 16, 1}, {4}, {3}},
{PCI_VENDOR_ID_MEILHAUS, 0x4683, {4, 4}, {32, 8, 16, 1}, {4}, {3}},
{0},
};
/*=============================================================================
PCI device table.
This is used by modprobe to translate PCI IDs to drivers.
===========================================================================*/
static struct pci_device_id me4000_pci_table[] __devinitdata = {
{PCI_VENDOR_ID_MEILHAUS, 0x4610, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4650, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4661, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4662, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4663, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4670, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4671, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4672, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4673, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4681, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4682, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MEILHAUS, 0x4683, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{0}
};
MODULE_DEVICE_TABLE(pci, me4000_pci_table);
/*=============================================================================
Global board and subdevice information structures
===========================================================================*/
struct me4000_info {
struct list_head list; // List of all detected boards
int board_count; // Index of the board after detection
unsigned long plx_regbase; // PLX configuration space base address
resource_size_t me4000_regbase; // Base address of the ME4000
resource_size_t timer_regbase; // Base address of the timer circuit
resource_size_t program_regbase; // Base address to set the program pin for the xilinx
unsigned long plx_regbase_size; // PLX register set space
resource_size_t me4000_regbase_size; // ME4000 register set space
resource_size_t timer_regbase_size; // Timer circuit register set space
resource_size_t program_regbase_size; // Size of program base address of the ME4000
unsigned int serial_no; // Serial number of the board
unsigned char hw_revision; // Hardware revision of the board
unsigned short vendor_id; // Meilhaus vendor id (0x1402)
unsigned short device_id; // Device ID
int pci_bus_no; // PCI bus number
int pci_dev_no; // PCI device number
int pci_func_no; // PCI function number
struct pci_dev *pci_dev_p; // General PCI information
struct me4000_board *board_p; // Holds the board capabilities
unsigned int irq; // IRQ assigned from the PCI BIOS
unsigned int irq_count; // Count of external interrupts
spinlock_t preload_lock; // Guards the analog output preload register
spinlock_t ai_ctrl_lock; // Guards the analog input control register
struct list_head ao_context_list; // List with analog output specific context
struct me4000_ai_context *ai_context; // Analog input specific context
struct me4000_dio_context *dio_context; // Digital I/O specific context
struct me4000_cnt_context *cnt_context; // Counter specific context
struct me4000_ext_int_context *ext_int_context; // External interrupt specific context
};
struct me4000_ao_context {
struct list_head list; // linked list of me4000_ao_context_t
int index; // Index in the list
int mode; // Indicates mode (0 = single, 1 = wraparound, 2 = continous)
int dac_in_use; // Indicates if already opend
spinlock_t use_lock; // Guards in_use
spinlock_t int_lock; // Used when locking out interrupts
struct me4000_circ_buf circ_buf; // Circular buffer
wait_queue_head_t wait_queue; // Wait queue to sleep while blocking write
struct me4000_info *board_info;
unsigned int irq; // The irq associated with this ADC
int volatile pipe_flag; // Indicates broken pipe set from me4000_ao_isr()
unsigned long ctrl_reg;
unsigned long status_reg;
unsigned long fifo_reg;
unsigned long single_reg;
unsigned long timer_reg;
unsigned long irq_status_reg;
unsigned long preload_reg;
struct fasync_struct *fasync_p; // Queue for asynchronous notification
};
struct me4000_ai_context {
struct list_head list; // linked list of me4000_ai_info_t
int mode; // Indicates mode
int in_use; // Indicates if already opend
spinlock_t use_lock; // Guards in_use
spinlock_t int_lock; // Used when locking out interrupts
int number; // Number of the DAC
unsigned int irq; // The irq associated with this ADC
struct me4000_circ_buf circ_buf; // Circular buffer
wait_queue_head_t wait_queue; // Wait queue to sleep while blocking read
struct me4000_info *board_info;
struct fasync_struct *fasync_p; // Queue for asynchronous notification
unsigned long ctrl_reg;
unsigned long status_reg;
unsigned long channel_list_reg;
unsigned long data_reg;
unsigned long chan_timer_reg;
unsigned long chan_pre_timer_reg;
unsigned long scan_timer_low_reg;
unsigned long scan_timer_high_reg;
unsigned long scan_pre_timer_low_reg;
unsigned long scan_pre_timer_high_reg;
unsigned long start_reg;
unsigned long irq_status_reg;
unsigned long sample_counter_reg;
unsigned long chan_timer;
unsigned long chan_pre_timer;
unsigned long scan_timer_low;
unsigned long scan_timer_high;
unsigned long channel_list_count;
unsigned long sample_counter;
int sample_counter_reload;
};
struct me4000_dio_context {
struct list_head list; // linked list of me4000_dio_context_t
int in_use; // Indicates if already opend
spinlock_t use_lock; // Guards in_use
int number;
int dio_count;
struct me4000_info *board_info;
unsigned long dir_reg;
unsigned long ctrl_reg;
unsigned long port_0_reg;
unsigned long port_1_reg;
unsigned long port_2_reg;
unsigned long port_3_reg;
};
struct me4000_cnt_context {
struct list_head list; // linked list of me4000_dio_context_t
int in_use; // Indicates if already opend
spinlock_t use_lock; // Guards in_use
int number;
int cnt_count;
struct me4000_info *board_info;
unsigned long ctrl_reg;
unsigned long counter_0_reg;
unsigned long counter_1_reg;
unsigned long counter_2_reg;
};
struct me4000_ext_int_context {
struct list_head list; // linked list of me4000_dio_context_t
int in_use; // Indicates if already opend
spinlock_t use_lock; // Guards in_use
int number;
struct me4000_info *board_info;
unsigned int irq;
unsigned long int_count;
struct fasync_struct *fasync_ptr;
unsigned long ctrl_reg;
unsigned long irq_status_reg;
};
#endif
/*=============================================================================
Application include section starts here
===========================================================================*/
/*-----------------------------------------------------------------------------
Defines for analog input
----------------------------------------------------------------------------*/
/* General stuff */
#define ME4000_AI_FIFO_COUNT 2048
#define ME4000_AI_MIN_TICKS 66
#define ME4000_AI_MAX_SCAN_TICKS 0xFFFFFFFFFFLL
#define ME4000_AI_BUFFER_SIZE (32 * 1024) // Size in bytes
#define ME4000_AI_BUFFER_COUNT ((ME4000_AI_BUFFER_SIZE) / 2) // Size in values
/* Channel list defines and masks */
#define ME4000_AI_CHANNEL_LIST_COUNT 1024
#define ME4000_AI_LIST_INPUT_SINGLE_ENDED 0x000
#define ME4000_AI_LIST_INPUT_DIFFERENTIAL 0x020
#define ME4000_AI_LIST_RANGE_BIPOLAR_10 0x000
#define ME4000_AI_LIST_RANGE_BIPOLAR_2_5 0x040
#define ME4000_AI_LIST_RANGE_UNIPOLAR_10 0x080
#define ME4000_AI_LIST_RANGE_UNIPOLAR_2_5 0x0C0
#define ME4000_AI_LIST_LAST_ENTRY 0x100
/* External trigger defines */
#define ME4000_AI_TRIGGER_SOFTWARE 0x0 // Use only with API
#define ME4000_AI_TRIGGER_EXT_DIGITAL 0x1
#define ME4000_AI_TRIGGER_EXT_ANALOG 0x2
#define ME4000_AI_TRIGGER_EXT_EDGE_RISING 0x0
#define ME4000_AI_TRIGGER_EXT_EDGE_FALLING 0x1
#define ME4000_AI_TRIGGER_EXT_EDGE_BOTH 0x2
/* Sample and Hold */
#define ME4000_AI_SIMULTANEOUS_DISABLE 0x0
#define ME4000_AI_SIMULTANEOUS_ENABLE 0x1
/* Defines for the Sample Counter */
#define ME4000_AI_SC_RELOAD 0x0
#define ME4000_AI_SC_ONCE 0x1
/* Modes for analog input */
#define ME4000_AI_ACQ_MODE_SINGLE 0x00 // Catch one single value
#define ME4000_AI_ACQ_MODE_SOFTWARE 0x01 // Continous sampling with software start
#define ME4000_AI_ACQ_MODE_EXT 0x02 // Continous sampling with external trigger start
#define ME4000_AI_ACQ_MODE_EXT_SINGLE_VALUE 0x03 // Sample one value by external trigger
#define ME4000_AI_ACQ_MODE_EXT_SINGLE_CHANLIST 0x04 // Sample one channel list by external trigger
/* Staus of AI FSM */
#define ME4000_AI_STATUS_IDLE 0x0
#define ME4000_AI_STATUS_BUSY 0x1
/* Voltages for calibration */
#define ME4000_AI_GAIN_1_UNI_OFFSET 10.0E-3
#define ME4000_AI_GAIN_1_UNI_FULLSCALE 9950.0E-3
#define ME4000_AI_GAIN_1_BI_OFFSET 0.0
#define ME4000_AI_GAIN_1_BI_FULLSCALE 9950.0E-3
#define ME4000_AI_GAIN_4_UNI_OFFSET 10.0E-3
#define ME4000_AI_GAIN_4_UNI_FULLSCALE 2450.0E-3
#define ME4000_AI_GAIN_4_BI_OFFSET 0.0
#define ME4000_AI_GAIN_4_BI_FULLSCALE 2450.0E-3
/* Ideal digits for calibration */
#define ME4000_AI_GAIN_1_UNI_OFFSET_DIGITS (-32702)
#define ME4000_AI_GAIN_1_UNI_FULLSCALE_DIGITS 32440
#define ME4000_AI_GAIN_1_BI_OFFSET_DIGITS 0
#define ME4000_AI_GAIN_1_BI_FULLSCALE_DIGITS 32604
#define ME4000_AI_GAIN_4_UNI_OFFSET_DIGITS (-32505)
#define ME4000_AI_GAIN_4_UNI_FULLSCALE_DIGITS 31457
#define ME4000_AI_GAIN_4_BI_OFFSET_DIGITS 0
#define ME4000_AI_GAIN_4_BI_FULLSCALE_DIGITS 32113
/*-----------------------------------------------------------------------------
Defines for analog output
----------------------------------------------------------------------------*/
/* General stuff */
#define ME4000_AO_FIFO_COUNT (4 * 1024)
#define ME4000_AO_MIN_TICKS 66
#define ME4000_AO_BUFFER_SIZE (32 * 1024) // Size in bytes
#define ME4000_AO_BUFFER_COUNT ((ME4000_AO_BUFFER_SIZE) / 2) // Size in values
/* Conversion modes for analog output */
#define ME4000_AO_CONV_MODE_SINGLE 0x0
#define ME4000_AO_CONV_MODE_WRAPAROUND 0x1
#define ME4000_AO_CONV_MODE_CONTINUOUS 0x2
/* Trigger setup */
#define ME4000_AO_TRIGGER_EXT_EDGE_RISING 0x0
#define ME4000_AO_TRIGGER_EXT_EDGE_FALLING 0x1
#define ME4000_AO_TRIGGER_EXT_EDGE_BOTH 0x2
/* Status of AO FSM */
#define ME4000_AO_STATUS_IDLE 0x0
#define ME4000_AO_STATUS_BUSY 0x1
/*-----------------------------------------------------------------------------
Defines for eeprom
----------------------------------------------------------------------------*/
#define ME4000_EEPROM_CMD_READ 0x180
#define ME4000_EEPROM_CMD_WRITE_ENABLE 0x130
#define ME4000_EEPROM_CMD_WRITE_DISABLE 0x100
#define ME4000_EEPROM_CMD_WRITE 0x1400000
#define ME4000_EEPROM_CMD_LENGTH_READ 9
#define ME4000_EEPROM_CMD_LENGTH_WRITE_ENABLE 9
#define ME4000_EEPROM_CMD_LENGTH_WRITE_DISABLE 9
#define ME4000_EEPROM_CMD_LENGTH_WRITE 25
#define ME4000_EEPROM_ADR_DATE_HIGH 0x32
#define ME4000_EEPROM_ADR_DATE_LOW 0x33
#define ME4000_EEPROM_ADR_GAIN_1_UNI_OFFSET 0x34
#define ME4000_EEPROM_ADR_GAIN_1_UNI_FULLSCALE 0x35
#define ME4000_EEPROM_ADR_GAIN_1_BI_OFFSET 0x36
#define ME4000_EEPROM_ADR_GAIN_1_BI_FULLSCALE 0x37
#define ME4000_EEPROM_ADR_GAIN_1_DIFF_OFFSET 0x38
#define ME4000_EEPROM_ADR_GAIN_1_DIFF_FULLSCALE 0x39
#define ME4000_EEPROM_ADR_GAIN_4_UNI_OFFSET 0x3A
#define ME4000_EEPROM_ADR_GAIN_4_UNI_FULLSCALE 0x3B
#define ME4000_EEPROM_ADR_GAIN_4_BI_OFFSET 0x3C
#define ME4000_EEPROM_ADR_GAIN_4_BI_FULLSCALE 0x3D
#define ME4000_EEPROM_ADR_GAIN_4_DIFF_OFFSET 0x3E
#define ME4000_EEPROM_ADR_GAIN_4_DIFF_FULLSCALE 0x3F
#define ME4000_EEPROM_ADR_LENGTH 6
#define ME4000_EEPROM_DATA_LENGTH 16
/*-----------------------------------------------------------------------------
Defines for digital I/O
----------------------------------------------------------------------------*/
#define ME4000_DIO_PORT_A 0x0
#define ME4000_DIO_PORT_B 0x1
#define ME4000_DIO_PORT_C 0x2
#define ME4000_DIO_PORT_D 0x3
#define ME4000_DIO_PORT_INPUT 0x0
#define ME4000_DIO_PORT_OUTPUT 0x1
#define ME4000_DIO_FIFO_LOW 0x2
#define ME4000_DIO_FIFO_HIGH 0x3
#define ME4000_DIO_FUNCTION_PATTERN 0x0
#define ME4000_DIO_FUNCTION_DEMUX 0x1
#define ME4000_DIO_FUNCTION_MUX 0x2
/*-----------------------------------------------------------------------------
Defines for counters
----------------------------------------------------------------------------*/
#define ME4000_CNT_COUNTER_0 0
#define ME4000_CNT_COUNTER_1 1
#define ME4000_CNT_COUNTER_2 2
#define ME4000_CNT_MODE_0 0 // Change state if zero crossing
#define ME4000_CNT_MODE_1 1 // Retriggerable One-Shot
#define ME4000_CNT_MODE_2 2 // Asymmetrical divider
#define ME4000_CNT_MODE_3 3 // Symmetrical divider
#define ME4000_CNT_MODE_4 4 // Counter start by software trigger
#define ME4000_CNT_MODE_5 5 // Counter start by hardware trigger
/*-----------------------------------------------------------------------------
General type definitions
----------------------------------------------------------------------------*/
struct me4000_user_info {
int board_count; // Index of the board after detection
unsigned long plx_regbase; // PLX configuration space base address
resource_size_t me4000_regbase; // Base address of the ME4000
unsigned long plx_regbase_size; // PLX register set space
resource_size_t me4000_regbase_size; // ME4000 register set space
unsigned long serial_no; // Serial number of the board
unsigned char hw_revision; // Hardware revision of the board
unsigned short vendor_id; // Meilhaus vendor id (0x1402)
unsigned short device_id; // Device ID
int pci_bus_no; // PCI bus number
int pci_dev_no; // PCI device number
int pci_func_no; // PCI function number
char irq; // IRQ assigned from the PCI BIOS
int irq_count; // Count of external interrupts
int driver_version; // Version of the driver release
int ao_count; // Count of analog output channels
int ao_fifo_count; // Count fo analog output fifos
int ai_count; // Count of analog input channels
int ai_sh_count; // Count of sample and hold devices
int ai_ex_trig_analog; // Flag to indicate if analogous external trigger is available
int dio_count; // Count of digital I/O ports
int cnt_count; // Count of counters
};
/*-----------------------------------------------------------------------------
Type definitions for analog output
----------------------------------------------------------------------------*/
struct me4000_ao_channel_list {
unsigned long count;
unsigned long *list;
};
/*-----------------------------------------------------------------------------
Type definitions for analog input
----------------------------------------------------------------------------*/
struct me4000_ai_channel_list {
unsigned long count;
unsigned long *list;
};
struct me4000_ai_timer {
unsigned long pre_chan;
unsigned long chan;
unsigned long scan_low;
unsigned long scan_high;
};
struct me4000_ai_config {
struct me4000_ai_timer timer;
struct me4000_ai_channel_list channel_list;
int sh;
};
struct me4000_ai_single {
int channel;
int range;
int mode;
short value;
unsigned long timeout;
};
struct me4000_ai_trigger {
int mode;
int edge;
};
struct me4000_ai_sc {
unsigned long value;
int reload;
};
/*-----------------------------------------------------------------------------
Type definitions for eeprom
----------------------------------------------------------------------------*/
struct me4000_eeprom {
unsigned long date;
short uni_10_offset;
short uni_10_fullscale;
short uni_2_5_offset;
short uni_2_5_fullscale;
short bi_10_offset;
short bi_10_fullscale;
short bi_2_5_offset;
short bi_2_5_fullscale;
short diff_10_offset;
short diff_10_fullscale;
short diff_2_5_offset;
short diff_2_5_fullscale;
};
/*-----------------------------------------------------------------------------
Type definitions for digital I/O
----------------------------------------------------------------------------*/
struct me4000_dio_config {
int port;
int mode;
int function;
};
struct me4000_dio_byte {
int port;
unsigned char byte;
};
/*-----------------------------------------------------------------------------
Type definitions for counters
----------------------------------------------------------------------------*/
struct me4000_cnt {
int counter;
unsigned short value;
};
struct me4000_cnt_config {
int counter;
int mode;
};
/*-----------------------------------------------------------------------------
Type definitions for external interrupt
----------------------------------------------------------------------------*/
struct me4000_int {
int int1_count;
int int2_count;
};
/*-----------------------------------------------------------------------------
The ioctls of the board
----------------------------------------------------------------------------*/
#define ME4000_IOCTL_MAXNR 50
#define ME4000_MAGIC 'y'
#define ME4000_GET_USER_INFO _IOR (ME4000_MAGIC, 0, \
struct me4000_user_info)
#define ME4000_AO_START _IOW (ME4000_MAGIC, 1, unsigned long)
#define ME4000_AO_STOP _IO (ME4000_MAGIC, 2)
#define ME4000_AO_IMMEDIATE_STOP _IO (ME4000_MAGIC, 3)
#define ME4000_AO_RESET _IO (ME4000_MAGIC, 4)
#define ME4000_AO_PRELOAD _IO (ME4000_MAGIC, 5)
#define ME4000_AO_PRELOAD_UPDATE _IO (ME4000_MAGIC, 6)
#define ME4000_AO_EX_TRIG_ENABLE _IO (ME4000_MAGIC, 7)
#define ME4000_AO_EX_TRIG_DISABLE _IO (ME4000_MAGIC, 8)
#define ME4000_AO_EX_TRIG_SETUP _IOW (ME4000_MAGIC, 9, int)
#define ME4000_AO_TIMER_SET_DIVISOR _IOW (ME4000_MAGIC, 10, unsigned long)
#define ME4000_AO_ENABLE_DO _IO (ME4000_MAGIC, 11)
#define ME4000_AO_DISABLE_DO _IO (ME4000_MAGIC, 12)
#define ME4000_AO_FSM_STATE _IOR (ME4000_MAGIC, 13, int)
#define ME4000_AI_SINGLE _IOR (ME4000_MAGIC, 14, \
struct me4000_ai_single)
#define ME4000_AI_START _IOW (ME4000_MAGIC, 15, unsigned long)
#define ME4000_AI_STOP _IO (ME4000_MAGIC, 16)
#define ME4000_AI_IMMEDIATE_STOP _IO (ME4000_MAGIC, 17)
#define ME4000_AI_EX_TRIG_ENABLE _IO (ME4000_MAGIC, 18)
#define ME4000_AI_EX_TRIG_DISABLE _IO (ME4000_MAGIC, 19)
#define ME4000_AI_EX_TRIG_SETUP _IOW (ME4000_MAGIC, 20, \
struct me4000_ai_trigger)
#define ME4000_AI_CONFIG _IOW (ME4000_MAGIC, 21, \
struct me4000_ai_config)
#define ME4000_AI_SC_SETUP _IOW (ME4000_MAGIC, 22, \
struct me4000_ai_sc)
#define ME4000_AI_FSM_STATE _IOR (ME4000_MAGIC, 23, int)
#define ME4000_DIO_CONFIG _IOW (ME4000_MAGIC, 24, \
struct me4000_dio_config)
#define ME4000_DIO_GET_BYTE _IOR (ME4000_MAGIC, 25, \
struct me4000_dio_byte)
#define ME4000_DIO_SET_BYTE _IOW (ME4000_MAGIC, 26, \
struct me4000_dio_byte)
#define ME4000_DIO_RESET _IO (ME4000_MAGIC, 27)
#define ME4000_CNT_READ _IOR (ME4000_MAGIC, 28, \
struct me4000_cnt)
#define ME4000_CNT_WRITE _IOW (ME4000_MAGIC, 29, \
struct me4000_cnt)
#define ME4000_CNT_CONFIG _IOW (ME4000_MAGIC, 30, \
struct me4000_cnt_config)
#define ME4000_CNT_RESET _IO (ME4000_MAGIC, 31)
#define ME4000_EXT_INT_DISABLE _IO (ME4000_MAGIC, 32)
#define ME4000_EXT_INT_ENABLE _IO (ME4000_MAGIC, 33)
#define ME4000_EXT_INT_COUNT _IOR (ME4000_MAGIC, 34, int)
#define ME4000_AI_OFFSET_ENABLE _IO (ME4000_MAGIC, 35)
#define ME4000_AI_OFFSET_DISABLE _IO (ME4000_MAGIC, 36)
#define ME4000_AI_FULLSCALE_ENABLE _IO (ME4000_MAGIC, 37)
#define ME4000_AI_FULLSCALE_DISABLE _IO (ME4000_MAGIC, 38)
#define ME4000_AI_EEPROM_READ _IOR (ME4000_MAGIC, 39, \
struct me4000_eeprom)
#define ME4000_AI_EEPROM_WRITE _IOW (ME4000_MAGIC, 40, \
struct me4000_eeprom)
#define ME4000_AO_SIMULTANEOUS_EX_TRIG _IO (ME4000_MAGIC, 41)
#define ME4000_AO_SIMULTANEOUS_SW _IO (ME4000_MAGIC, 42)
#define ME4000_AO_SIMULTANEOUS_DISABLE _IO (ME4000_MAGIC, 43)
#define ME4000_AO_SIMULTANEOUS_UPDATE _IOW (ME4000_MAGIC, 44, \
struct me4000_ao_channel_list)
#define ME4000_AO_SYNCHRONOUS_EX_TRIG _IO (ME4000_MAGIC, 45)
#define ME4000_AO_SYNCHRONOUS_SW _IO (ME4000_MAGIC, 46)
#define ME4000_AO_SYNCHRONOUS_DISABLE _IO (ME4000_MAGIC, 47)
#define ME4000_AO_EX_TRIG_TIMEOUT _IOW (ME4000_MAGIC, 48, unsigned long)
#define ME4000_AO_GET_FREE_BUFFER _IOR (ME4000_MAGIC, 49, unsigned long)
#define ME4000_AI_GET_COUNT_BUFFER _IOR (ME4000_MAGIC, 50, unsigned long)
#endif
This source diff could not be displayed because it is too large. You can view the blob instead.
This source diff could not be displayed because it is too large. You can view the blob instead.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment