Commit 0807dd03 authored by Linus Torvalds's avatar Linus Torvalds

Merge http://linux-isdn.bkbits.net/linux-2.5.isdn

into home.transmeta.com:/home/torvalds/v2.5/linux
parents e170a233 262b7e76
......@@ -39,6 +39,6 @@ obj-$(CONFIG_PHONE) += telephony/
obj-$(CONFIG_MD) += md/
obj-$(CONFIG_BLUEZ) += bluetooth/
obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
obj-$(CONFIG_ISDN) += isdn/
obj-$(CONFIG_ISDN_BOOL) += isdn/
include $(TOPDIR)/Rules.make
......@@ -2,5 +2,5 @@
# Config.in for IBM Active 2000 ISDN driver
#
dep_tristate 'IBM Active 2000 support' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN
dep_tristate 'IBM Active 2000 support' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN $CONFIG_ISA
......@@ -2972,7 +2972,7 @@ idi_send_data(eicon_card *card, eicon_chan *chan, int ack, struct sk_buff *skb,
spin_unlock_irqrestore(&eicon_lock, flags);
eicon_log(card, 1, "idi_err: Ch%d: alloc_skb failed in send_data()\n", chan->No);
if (xmit_skb)
dev_kfree_skb(skb);
dev_kfree_skb(xmit_skb);
if (skb2)
dev_kfree_skb(skb2);
return -ENOMEM;
......
......@@ -8,12 +8,12 @@ comment 'Drivers for active AVM cards'
bool 'Support AVM cards' CONFIG_CAPI_AVM
if [ "$CONFIG_CAPI_AVM" != "n" ]; then
dep_tristate ' AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA $CONFIG_ISDN_CAPI
dep_tristate ' AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA $CONFIG_ISDN_CAPI $CONFIG_SA
dep_tristate ' AVM B1 PCI support' CONFIG_ISDN_DRV_AVMB1_B1PCI $CONFIG_ISDN_CAPI $CONFIG_PCI
dep_mbool ' AVM B1 PCI V4 support' CONFIG_ISDN_DRV_AVMB1_B1PCIV4 $CONFIG_ISDN_DRV_AVMB1_B1PCI
dep_tristate ' AVM T1/T1-B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA $CONFIG_ISDN_CAPI
dep_tristate ' AVM T1/T1-B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA $CONFIG_ISDN_CAPI $CONFIG_ISA
dep_tristate ' AVM B1/M1/M2 PCMCIA support' CONFIG_ISDN_DRV_AVMB1_B1PCMCIA $CONFIG_ISDN_CAPI
......
......@@ -211,7 +211,7 @@ static int b1pciv4_probe(struct capicardparams *p, struct pci_dev *pdev)
goto err_free_dma;
}
card->mbase = ioremap_nocache(card->membase, 64);
card->mbase = ioremap(card->membase, 64);
if (!card->mbase) {
printk(KERN_NOTICE "b1pci: can't remap memory at 0x%lx\n",
card->membase);
......
......@@ -1129,7 +1129,7 @@ static int c4_add_card(struct capicardparams *p, struct pci_dev *dev,
goto err_free_dma;
}
card->mbase = ioremap_nocache(card->membase, 128);
card->mbase = ioremap(card->membase, 128);
if (card->mbase == 0) {
printk(KERN_NOTICE "c4: can't remap memory at 0x%lx\n",
card->membase);
......
......@@ -79,7 +79,7 @@ static int t1pci_add_card(struct capicardparams *p, struct pci_dev *pdev)
goto err_free_dma;
}
card->mbase = ioremap_nocache(card->membase, 64);
card->mbase = ioremap(card->membase, 64);
if (!card->mbase) {
printk(KERN_NOTICE "t1pci: can't remap memory at 0x%lx\n",
card->membase);
......
......@@ -251,6 +251,10 @@ CONFIG_HISAX_SEDLBAUER_CS
This enables the PCMCIA client driver for the Sedlbauer Speed Star
and Speed Star II cards.
CONFIG_HISAX_AVM_A1_CS
This enables the PCMCIA client driver for the AVM A1 / Fritz!Card
PCMCIA cards.
CONFIG_HISAX_ST5481
This enables the driver for ST5481 based USB ISDN adapters,
e.g. the BeWan Gazel 128 USB
......
......@@ -14,28 +14,28 @@ if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
bool ' HiSax Support for US NI1' CONFIG_HISAX_NI1
int ' Maximum number of cards supported by HiSax' CONFIG_HISAX_MAX_CARDS 8
comment ' HiSax supported cards'
bool ' Teles 16.0/8.0' CONFIG_HISAX_16_0
bool ' Teles 16.0/8.0' CONFIG_HISAX_16_0 $CONFIG_ISA
bool ' Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
bool ' Teles PCI' CONFIG_HISAX_TELESPCI
bool ' Teles S0Box' CONFIG_HISAX_S0BOX
bool ' AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
bool ' AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1 $CONFIG_ISA
bool ' AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
bool ' AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
bool ' Elsa cards' CONFIG_HISAX_ELSA
bool ' ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
bool ' ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2 $CONFIG_ISA
bool ' Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
bool ' ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM
bool ' TELEINT cards' CONFIG_HISAX_TELEINT
bool ' HFC-S based cards' CONFIG_HISAX_HFCS
bool ' ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM $CONFIG_ISA
bool ' TELEINT cards' CONFIG_HISAX_TELEINT $CONFIG_ISA
bool ' HFC-S based cards' CONFIG_HISAX_HFCS $CONFIG_ISA
bool ' Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
bool ' USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
bool ' MIC card' CONFIG_HISAX_MIC
bool ' USR Sportster internal TA' CONFIG_HISAX_SPORTSTER $CONFIG_ISA
bool ' MIC card' CONFIG_HISAX_MIC $CONFIG_ISA
bool ' NETjet card' CONFIG_HISAX_NETJET
bool ' NETspider U card' CONFIG_HISAX_NETJET_U
bool ' Niccy PnP/PCI card' CONFIG_HISAX_NICCY
bool ' Siemens I-Surf card' CONFIG_HISAX_ISURF
bool ' HST Saphir card' CONFIG_HISAX_HSTSAPHIR
bool ' Telekom A4T card' CONFIG_HISAX_BKM_A4T
bool ' Siemens I-Surf card' CONFIG_HISAX_ISURF $CONFIG_ISA
bool ' HST Saphir card' CONFIG_HISAX_HSTSAPHIR $CONFIG_ISA
bool ' Telekom A4T card' CONFIG_HISAX_BKM_A4T
bool ' Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
bool ' Gazel cards' CONFIG_HISAX_GAZEL
bool ' HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI
......@@ -52,6 +52,7 @@ if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
dep_tristate 'Sedlbauer PCMCIA cards' CONFIG_HISAX_SEDLBAUER_CS $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA
dep_tristate 'ELSA PCMCIA MicroLink cards' CONFIG_HISAX_ELSA_CS $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA
dep_tristate 'AVM A1 PCMCIA cards' CONFIG_HISAX_AVM_A1_CS $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA
dep_tristate 'ST5481 USB ISDN modem (EXPERIMENTAL)' CONFIG_HISAX_ST5481 $CONFIG_ISDN_DRV_HISAX $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate 'AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)' CONFIG_HISAX_FRITZ_PCIPNP $CONFIG_ISDN_DRV_HISAX $CONFIG_EXPERIMENTAL
dep_tristate 'AVM Fritz!Card classic support (EXPERIMENTAL)' CONFIG_HISAX_FRITZ_CLASSIC $CONFIG_ISDN_DRV_HISAX $CONFIG_EXPERIMENTAL
......
......@@ -13,6 +13,7 @@ export-objs := config.o hisax_isac.o hisax_hscx.o
obj-$(CONFIG_ISDN_DRV_HISAX) += hisax.o
obj-$(CONFIG_HISAX_SEDLBAUER_CS) += sedlbauer_cs.o
obj-$(CONFIG_HISAX_ELSA_CS) += elsa_cs.o
obj-$(CONFIG_HISAX_AVM_A1_CS) += avma1_cs.o
obj-$(CONFIG_HISAX_ST5481) += hisax_st5481.o
obj-$(CONFIG_HISAX_FRITZ_PCIPNP) += hisax_isac.o hisax_fcpcipnp.o
obj-$(CONFIG_HISAX_FRITZ_CLASSIC) += hisax_isac.o hisax_hscx.o hisax_fcclassic.o
......
/*
* PCMCIA client driver for AVM A1 / Fritz!PCMCIA
*
* Author Carsten Paeth
* Copyright 1998-2001 by Carsten Paeth <calle@calle.in-berlin.de>
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <asm/io.h>
#include <asm/system.h>
#include <pcmcia/version.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for AVM A1/Fritz!PCMCIA cards");
MODULE_AUTHOR("Carsten Paeth");
MODULE_LICENSE("GPL");
int avm_a1_init_pcmcia(void *pcm_iob, int pcm_irq, int *busy_flag, int prot);
void HiSax_closecard(int cardnr);
/*
All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
you do not define PCMCIA_DEBUG at all, all the debug code will be
left out. If you compile with PCMCIA_DEBUG=0, the debug code will
be present but disabled -- but it can then be enabled for specific
modules at load time with a 'pc_debug=#' option to insmod.
*/
#ifdef PCMCIA_DEBUG
static int pc_debug = PCMCIA_DEBUG;
MODULE_PARM(pc_debug, "i");
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
static char *version =
"avma1_cs.c 1.00 1998/01/23 10:00:00 (Carsten Paeth)";
#else
#define DEBUG(n, args...)
#endif
/*====================================================================*/
/* Parameters that can be set with 'insmod' */
static int default_irq_list[11] = { 15, 13, 12, 11, 10, 9, 7, 5, 4, 3, -1 };
static int irq_list[11] = { -1 };
static int isdnprot = 2;
MODULE_PARM(irq_list, "1-11i");
MODULE_PARM(isdnprot, "1-4i");
/*====================================================================*/
/*
The event() function is this driver's Card Services event handler.
It will be called by Card Services when an appropriate card status
event is received. The config() and release() entry points are
used to configure or release a socket, in response to card insertion
and ejection events. They are invoked from the skeleton event
handler.
*/
static void avma1cs_config(dev_link_t *link);
static void avma1cs_release(u_long arg);
static int avma1cs_event(event_t event, int priority,
event_callback_args_t *args);
/*
The attach() and detach() entry points are used to create and destroy
"instances" of the driver, where each instance represents everything
needed to manage one actual PCMCIA card.
*/
static dev_link_t *avma1cs_attach(void);
static void avma1cs_detach(dev_link_t *);
/*
The dev_info variable is the "key" that is used to match up this
device driver with appropriate cards, through the card configuration
database.
*/
static dev_info_t dev_info = "avma1_cs";
/*
A linked list of "instances" of the skeleton device. Each actual
PCMCIA card corresponds to one device instance, and is described
by one dev_link_t structure (defined in ds.h).
You may not want to use a linked list for this -- for example, the
memory card driver uses an array of dev_link_t pointers, where minor
device numbers are used to derive the corresponding array index.
*/
static dev_link_t *dev_list = NULL;
/*
A dev_link_t structure has fields for most things that are needed
to keep track of a socket, but there will usually be some device
specific information that also needs to be kept track of. The
'priv' pointer in a dev_link_t structure can be used to point to
a device-specific private data structure, like this.
A driver needs to provide a dev_node_t structure for each device
on a card. In some cases, there is only one device per card (for
example, ethernet cards, modems). In other cases, there may be
many actual or logical devices (SCSI adapters, memory cards with
multiple partitions). The dev_node_t structures need to be kept
in a linked list starting at the 'dev' field of a dev_link_t
structure. We allocate them in the card's private data structure,
because they generally can't be allocated dynamically.
*/
typedef struct local_info_t {
dev_node_t node;
} local_info_t;
/*====================================================================*/
static void cs_error(client_handle_t handle, int func, int ret)
{
error_info_t err = { func, ret };
CardServices(ReportError, handle, &err);
}
/*======================================================================
avma1cs_attach() creates an "instance" of the driver, allocating
local data structures for one device. The device is registered
with Card Services.
The dev_link structure is initialized, but we don't actually
configure the card at this point -- we wait until we receive a
card insertion event.
======================================================================*/
static dev_link_t *avma1cs_attach(void)
{
client_reg_t client_reg;
dev_link_t *link;
local_info_t *local;
int ret, i;
DEBUG(0, "avma1cs_attach()\n");
/* Initialize the dev_link_t structure */
link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
memset(link, 0, sizeof(struct dev_link_t));
link->release.function = &avma1cs_release;
link->release.data = (u_long)link;
/* The io structure describes IO port mapping */
link->io.NumPorts1 = 16;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts2 = 16;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
link->io.IOAddrLines = 5;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
if (irq_list[0] != -1) {
for (i = 0; i < 10 && irq_list[i] > 0; i++)
link->irq.IRQInfo2 |= 1 << irq_list[i];
} else {
for (i = 0; i < 10 && default_irq_list[i] > 0; i++)
link->irq.IRQInfo2 |= 1 << default_irq_list[i];
}
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
/* Allocate space for private device-specific data */
local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
memset(local, 0, sizeof(local_info_t));
link->priv = local;
/* Register with Card Services */
link->next = dev_list;
dev_list = link;
client_reg.dev_info = &dev_info;
client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
client_reg.EventMask =
CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
client_reg.event_handler = &avma1cs_event;
client_reg.Version = 0x0210;
client_reg.event_callback_args.client_data = link;
ret = CardServices(RegisterClient, &link->handle, &client_reg);
if (ret != 0) {
cs_error(link->handle, RegisterClient, ret);
avma1cs_detach(link);
return NULL;
}
return link;
} /* avma1cs_attach */
/*======================================================================
This deletes a driver "instance". The device is de-registered
with Card Services. If it has been released, all local data
structures are freed. Otherwise, the structures will be freed
when the device is released.
======================================================================*/
static void avma1cs_detach(dev_link_t *link)
{
dev_link_t **linkp;
DEBUG(0, "avma1cs_detach(0x%p)\n", link);
/* Locate device structure */
for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
if (*linkp == link) break;
if (*linkp == NULL)
return;
/*
If the device is currently configured and active, we won't
actually delete it yet. Instead, it is marked so that when
the release() function is called, that will trigger a proper
detach().
*/
if (link->state & DEV_CONFIG) {
#ifdef PCMCIA_DEBUG
printk(KERN_DEBUG "avma1_cs: detach postponed, '%s' "
"still locked\n", link->dev->dev_name);
#endif
link->state |= DEV_STALE_LINK;
return;
}
/* Break the link with Card Services */
if (link->handle)
CardServices(DeregisterClient, link->handle);
/* Unlink device structure, free pieces */
*linkp = link->next;
if (link->priv) {
kfree(link->priv);
}
kfree(link);
} /* avma1cs_detach */
/*======================================================================
avma1cs_config() is scheduled to run after a CARD_INSERTION event
is received, to configure the PCMCIA socket, and to make the
ethernet device available to the system.
======================================================================*/
static int get_tuple(int fn, client_handle_t handle, tuple_t *tuple,
cisparse_t *parse)
{
int i;
i = CardServices(fn, handle, tuple);
if (i != CS_SUCCESS) return i;
i = CardServices(GetTupleData, handle, tuple);
if (i != CS_SUCCESS) return i;
return CardServices(ParseTuple, handle, tuple, parse);
}
#define first_tuple(a, b, c) get_tuple(GetFirstTuple, a, b, c)
#define next_tuple(a, b, c) get_tuple(GetNextTuple, a, b, c)
static void avma1cs_config(dev_link_t *link)
{
client_handle_t handle;
tuple_t tuple;
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
local_info_t *dev;
int i;
u_char buf[64];
char devname[128];
int busy = 0;
handle = link->handle;
dev = link->priv;
DEBUG(0, "avma1cs_config(0x%p)\n", link);
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
do {
tuple.DesiredTuple = CISTPL_CONFIG;
i = CardServices(GetFirstTuple, handle, &tuple);
if (i != CS_SUCCESS) break;
tuple.TupleData = buf;
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
i = CardServices(GetTupleData, handle, &tuple);
if (i != CS_SUCCESS) break;
i = CardServices(ParseTuple, handle, &tuple, &parse);
if (i != CS_SUCCESS) break;
link->conf.ConfigBase = parse.config.base;
} while (0);
if (i != CS_SUCCESS) {
cs_error(link->handle, ParseTuple, i);
link->state &= ~DEV_CONFIG_PENDING;
return;
}
/* Configure card */
link->state |= DEV_CONFIG;
do {
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = 254;
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_VERS_1;
devname[0] = 0;
if( !first_tuple(handle, &tuple, &parse) && parse.version_1.ns > 1 ) {
strncpy(devname,parse.version_1.str + parse.version_1.ofs[1],
sizeof(devname));
}
/*
* find IO port
*/
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(handle, &tuple, &parse);
while (i == CS_SUCCESS) {
if (cf->io.nwin > 0) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.NumPorts1 = cf->io.win[0].len;
link->io.NumPorts2 = 0;
printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n",
link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1 - 1);
i = CardServices(RequestIO, link->handle, &link->io);
if (i == CS_SUCCESS) goto found_port;
}
i = next_tuple(handle, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIO, i);
break;
}
/*
* allocate an interrupt line
*/
i = CardServices(RequestIRQ, link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
CardServices(ReleaseIO, link->handle, &link->io);
break;
}
/*
* configure the PCMCIA socket
*/
i = CardServices(RequestConfiguration, link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
CardServices(ReleaseIO, link->handle, &link->io);
CardServices(ReleaseIRQ, link->handle, &link->irq);
break;
}
} while (0);
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. */
strcpy(dev->node.dev_name, "A1");
dev->node.major = 45;
dev->node.minor = 0;
link->dev = &dev->node;
link->state &= ~DEV_CONFIG_PENDING;
/* If any step failed, release any partially configured state */
if (i != 0) {
avma1cs_release((u_long)link);
return;
}
printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n",
link->io.BasePort1, link->irq.AssignedIRQ);
if (avm_a1_init_pcmcia((void *)(int)link->io.BasePort1,
link->irq.AssignedIRQ,
&busy, isdnprot) != 0) {
printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 PCMCIA %d at i/o %#x\n", i, link->io.BasePort1);
return;
}
i = 0; /* no returncode for cardnr :-( */
dev->node.minor = i;
} /* avma1cs_config */
/*======================================================================
After a card is removed, avma1cs_release() will unregister the net
device, and release the PCMCIA configuration. If the device is
still open, this will be postponed until it is closed.
======================================================================*/
static void avma1cs_release(u_long arg)
{
dev_link_t *link = (dev_link_t *)arg;
local_info_t *local = link->priv;
DEBUG(0, "avma1cs_release(0x%p)\n", link);
/*
If the device is currently in use, we won't release until it
is actually closed.
*/
if (link->open) {
DEBUG(1, "avma1_cs: release postponed, '%s' still open\n",
link->dev->dev_name);
link->state |= DEV_STALE_CONFIG;
return;
}
/* no unregister function with hisax */
HiSax_closecard(local->node.minor);
/* Unlink the device chain */
link->dev = NULL;
/* Don't bother checking to see if these succeed or not */
CardServices(ReleaseConfiguration, link->handle);
CardServices(ReleaseIO, link->handle, &link->io);
CardServices(ReleaseIRQ, link->handle, &link->irq);
link->state &= ~DEV_CONFIG;
if (link->state & DEV_STALE_LINK)
avma1cs_detach(link);
} /* avma1cs_release */
/*======================================================================
The card status event handler. Mostly, this schedules other
stuff to run after an event is received. A CARD_REMOVAL event
also sets some flags to discourage the net drivers from trying
to talk to the card any more.
When a CARD_REMOVAL event is received, we immediately set a flag
to block future accesses to this device. All the functions that
actually access the device should check this flag to make sure
the card is still present.
======================================================================*/
static int avma1cs_event(event_t event, int priority,
event_callback_args_t *args)
{
dev_link_t *link = args->client_data;
DEBUG(1, "avma1cs_event(0x%06x)\n", event);
switch (event) {
case CS_EVENT_CARD_REMOVAL:
link->state &= ~DEV_PRESENT;
if (link->state & DEV_CONFIG) {
link->release.expires = jiffies + HZ/20;
add_timer(&link->release);
}
break;
case CS_EVENT_CARD_INSERTION:
link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
avma1cs_config(link);
break;
case CS_EVENT_PM_SUSPEND:
link->state |= DEV_SUSPEND;
/* Fall through... */
case CS_EVENT_RESET_PHYSICAL:
if (link->state & DEV_CONFIG)
CardServices(ReleaseConfiguration, link->handle);
break;
case CS_EVENT_PM_RESUME:
link->state &= ~DEV_SUSPEND;
/* Fall through... */
case CS_EVENT_CARD_RESET:
if (link->state & DEV_CONFIG)
CardServices(RequestConfiguration, link->handle, &link->conf);
break;
}
return 0;
} /* avma1cs_event */
/*====================================================================*/
static int __init init_avma1_cs(void)
{
servinfo_t serv;
DEBUG(0, "%s\n", version);
CardServices(GetCardServicesInfo, &serv);
if (serv.Revision != CS_RELEASE_CODE) {
printk(KERN_NOTICE "avma1_cs: Card Services release "
"does not match!\n");
return -1;
}
register_pccard_driver(&dev_info, &avma1cs_attach, &avma1cs_detach);
return 0;
}
static void __exit exit_avma1_cs(void)
{
DEBUG(0, "avma1_cs: unloading\n");
unregister_pccard_driver(&dev_info);
while (dev_list != NULL)
if (dev_list->state & DEV_CONFIG)
avma1cs_release((u_long)dev_list);
avma1cs_detach(dev_list);
}
module_init(init_avma1_cs);
module_exit(exit_avma1_cs);
......@@ -2,4 +2,4 @@
# Config.in for ICN ISDN driver
#
dep_tristate 'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
dep_tristate 'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN $CONFIG_ISA
......@@ -2,4 +2,4 @@
# Config.in for PCBIT ISDN driver
#
dep_tristate 'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
dep_tristate 'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN $CONFIG_ISA
......@@ -12,6 +12,8 @@
#ifndef PCBIT_H
#define PCBIT_H
#include <linux/tqueue.h>
#define MAX_PCBIT_CARDS 4
......
......@@ -2,4 +2,4 @@
# Config.in for Spellcaster ISDN driver
#
dep_tristate 'Spellcaster support' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
dep_tristate 'Spellcaster support' CONFIG_ISDN_DRV_SC $CONFIG_ISDN $CONFIG_ISA
......@@ -16,6 +16,7 @@
#include <linux/isdnif.h>
#include <linux/init.h>
#include <linux/tqueue.h>
/* Maximum number of channels for this board */
#define TPAM_NBCHANNEL 30
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment