Merge tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - Enable thermal policy for ASUS TUF FX705DY/FX505DY

 - Support left round button on ASUS N56VB

 - Support new Mellanox platforms of basic class VMOD0009 and VMOD0010

 - Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC
   driver

 - Big clean-up to Intel PMC core, PMC IPC and SCU IPC drivers

 - Touchscreen support for the PiPO W11 tablet

* tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
  platform/x86: intel_pmc_ipc: Switch to use driver->dev_groups
  platform/x86: intel_pmc_ipc: Propagate error from kstrtoul()
  platform/x86: intel_pmc_ipc: Use octal permissions in sysfs attributes
  platform/x86: intel_pmc_ipc: Get rid of unnecessary includes
  platform/x86: intel_pmc_ipc: Drop ipc_data_readb()
  platform/x86: intel_pmc_ipc: Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_raw_cmd() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_simple_command() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_gcr_update() static
  platform/x86: intel_scu_ipc: Reformat kernel-doc comments of exported functions
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_raw_command()
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_io[read|write][8|16]()
  platform/x86: intel_scu_ipc: Drop unused macros
  platform/x86: intel_scu_ipc: Drop unused prototype intel_scu_ipc_fw_update()
  platform/x86: intel_scu_ipc: Sleeping is fine when polling
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_i2c_cntrl()
  platform/x86: intel_scu_ipc: Remove Lincroft support
  platform/x86: intel_scu_ipc: Add constants for register offsets
  platform/x86: intel_scu_ipc: Fix interrupt support
  platform/x86: intel_scu_ipcutil: Remove default y from Kconfig
  ...

Documentation/ABI/stable/sysfs-driver-mlxreg-io

 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
-
 Date:		June 2018
 KernelVersion:	4.19
 Contact:	Vadim Pasternak <vadimpmellanox.com>
@@ -19,7 +18,6 @@ Description:	These files show with which CPLD versions have been burned
 		The files are read only.
 
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
-
 Date:		December 2018
 KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
@@ -30,7 +28,6 @@ Description:	This file shows the system fans direction:
 		The files are read only.
 
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
-
 Date:		November 2018
 KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
@@ -40,7 +37,6 @@ Description:	These files show with which CPLD versions have been burned
 		The files are read only.
 
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
-
 Date:		November 2018
 KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
@@ -108,7 +104,6 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
-
 Date:		November 2018
 KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
@@ -130,6 +125,12 @@ Description:	These files show with which CPLD versions have been burned
 
 		The files are read only.
 
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
 Date:		June 2019
 KernelVersion:	5.3
 Contact:	Vadim Pasternak <vadimpmellanox.com>
@@ -143,9 +144,65 @@ Description:	These files show the system reset cause, as following:
 
 		The files are read only.
 
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
+Date:		January 2020
+KernelVersion:	5.6
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show system static topology identification
+		like system's static I2C topology, number and type of FPGA
+		devices within the system and so on.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
+Date:		January 2020
+KernelVersion:	5.6
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show the system reset causes, as following: reset
+		due to AC power failure, reset invoked from software by
+		assertion reset signal through CPLD. reset caused by signal
+		asserted by SOC through ACPI register, reset invoked from
+		software by assertion power off signal through CPLD.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
+Date:		January 2020
+KernelVersion:	5.6
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	This file allows to retain ASIC up during PCIe root complex
+		reset, when attribute is set 1.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
+Date:		January 2020
+KernelVersion:	5.6
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	This file allows to overwrite system VPD hardware wrtie
+		protection when attribute is set 1.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
+Date:		January 2020
+KernelVersion:	5.6
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	This file exposes the configuration update status of burnable
+		voltage regulator devices. The status values are as following:
+		0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
+
+		The file is read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
+Date:		January 2020
+KernelVersion:	5.6
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	This file exposes the firmware version of burnable voltage
+		regulator devices.
+
+		The file is read only.

Documentation/ABI/testing/sysfs-platform-asus-wmi

@@ -46,3 +46,13 @@ Description:
 			* 0 - normal,
 			* 1 - overboost,
 			* 2 - silent
+
+What:		/sys/devices/platform/<platform>/throttle_thermal_policy
+Date:		Dec 2019
+KernelVersion:	5.6
+Contact:	"Leonid Maksymchuk" <leonmaxx@gmail.com>
+Description:
+		Throttle thermal policy mode:
+			* 0 - default,
+			* 1 - overboost,
+			* 2 - silent

MAINTAINERS

@@ -8573,6 +8573,12 @@ S:	Maintained
 F:	arch/x86/include/asm/intel_telemetry.h
 F:	drivers/platform/x86/intel_telemetry*
 
+INTEL UNCORE FREQUENCY CONTROL
+M:	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+L:	platform-driver-x86@vger.kernel.org
+S:	Maintained
+F:	drivers/platform/x86/intel-uncore-frequency.c
+
 INTEL VIRTUAL BUTTON DRIVER
 M:	AceLan Kao <acelan.kao@canonical.com>
 L:	platform-driver-x86@vger.kernel.org

arch/x86/include/asm/intel_pmc_ipc.h

@@ -31,30 +31,13 @@
 
 #if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
 
-int intel_pmc_ipc_simple_command(int cmd, int sub);
-int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen,
-		u32 *out, u32 outlen, u32 dptr, u32 sptr);
 int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
 		u32 *out, u32 outlen);
 int intel_pmc_s0ix_counter_read(u64 *data);
-int intel_pmc_gcr_read(u32 offset, u32 *data);
 int intel_pmc_gcr_read64(u32 offset, u64 *data);
-int intel_pmc_gcr_write(u32 offset, u32 data);
-int intel_pmc_gcr_update(u32 offset, u32 mask, u32 val);
 
 #else
 
-static inline int intel_pmc_ipc_simple_command(int cmd, int sub)
-{
-	return -EINVAL;
-}
-
-static inline int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen,
-		u32 *out, u32 outlen, u32 dptr, u32 sptr)
-{
-	return -EINVAL;
-}
-
 static inline int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
 		u32 *out, u32 outlen)
 {
@@ -66,26 +49,11 @@ static inline int intel_pmc_s0ix_counter_read(u64 *data)
 	return -EINVAL;
 }
 
-static inline int intel_pmc_gcr_read(u32 offset, u32 *data)
-{
-	return -EINVAL;
-}
-
 static inline int intel_pmc_gcr_read64(u32 offset, u64 *data)
 {
 	return -EINVAL;
 }
 
-static inline int intel_pmc_gcr_write(u32 offset, u32 data)
-{
-	return -EINVAL;
-}
-
-static inline int intel_pmc_gcr_update(u32 offset, u32 mask, u32 val)
-{
-	return -EINVAL;
-}
-
 #endif /*CONFIG_INTEL_PMC_IPC*/
 
 #endif

arch/x86/include/asm/intel_scu_ipc.h

@@ -22,24 +22,12 @@
 /* Read single register */
 int intel_scu_ipc_ioread8(u16 addr, u8 *data);
 
-/* Read two sequential registers */
-int intel_scu_ipc_ioread16(u16 addr, u16 *data);
-
-/* Read four sequential registers */
-int intel_scu_ipc_ioread32(u16 addr, u32 *data);
-
 /* Read a vector */
 int intel_scu_ipc_readv(u16 *addr, u8 *data, int len);
 
 /* Write single register */
 int intel_scu_ipc_iowrite8(u16 addr, u8 data);
 
-/* Write two sequential registers */
-int intel_scu_ipc_iowrite16(u16 addr, u16 data);
-
-/* Write four sequential registers */
-int intel_scu_ipc_iowrite32(u16 addr, u32 data);
-
 /* Write a vector */
 int intel_scu_ipc_writev(u16 *addr, u8 *data, int len);
 
@@ -50,14 +38,6 @@ int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask);
 int intel_scu_ipc_simple_command(int cmd, int sub);
 int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
 			  u32 *out, int outlen);
-int intel_scu_ipc_raw_command(int cmd, int sub, u8 *in, int inlen,
-			      u32 *out, int outlen, u32 dptr, u32 sptr);
-
-/* I2C control api */
-int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data);
-
-/* Update FW version */
-int intel_scu_ipc_fw_update(u8 *buffer, u32 length);
 
 extern struct blocking_notifier_head intel_scu_notifier;
 

arch/x86/include/asm/intel_telemetry.h

@@ -40,13 +40,10 @@ struct telemetry_evtmap {
 struct telemetry_unit_config {
 	struct telemetry_evtmap *telem_evts;
 	void __iomem *regmap;
-	u32 ssram_base_addr;
 	u8 ssram_evts_used;
 	u8 curr_period;
 	u8 max_period;
 	u8 min_period;
-	u32 ssram_size;
-
 };
 
 struct telemetry_plt_config {

drivers/platform/mellanox/mlxreg-hotplug.c

@@ -504,6 +504,20 @@ static int mlxreg_hotplug_set_irq(struct mlxreg_hotplug_priv_data *priv)
 	item = pdata->items;
 
 	for (i = 0; i < pdata->counter; i++, item++) {
+		if (item->capability) {
+			/*
+			 * Read group capability register to get actual number
+			 * of interrupt capable components and set group mask
+			 * accordingly.
+			 */
+			ret = regmap_read(priv->regmap, item->capability,
+					  &regval);
+			if (ret)
+				goto out;
+
+			item->mask = GENMASK((regval & item->mask) - 1, 0);
+		}
+
 		/* Clear group presense event. */
 		ret = regmap_write(priv->regmap, item->reg +
 				   MLXREG_HOTPLUG_EVENT_OFF, 0);

drivers/platform/x86/Kconfig

@@ -997,7 +997,6 @@ config INTEL_SCU_IPC
 config INTEL_SCU_IPC_UTIL
 	tristate "Intel SCU IPC utility driver"
 	depends on INTEL_SCU_IPC
-	default y
 	---help---
 	  The IPC Util driver provides an interface with the SCU enabling
 	  low level access for debug work and updating the firmware. Say
@@ -1299,9 +1298,9 @@ config INTEL_ATOMISP2_PM
 	depends on PCI && IOSF_MBI && PM
 	help
 	  Power-management driver for Intel's Image Signal Processor found on
-	  Bay and Cherry Trail devices. This dummy driver's sole purpose is to
-	  turn the ISP off (put it in D3) to save power and to allow entering
-	  of S0ix modes.
+	  Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
+	  is to turn the ISP off (put it in D3) to save power and to allow
+	  entering of S0ix modes.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called intel_atomisp2_pm.
@@ -1337,6 +1336,17 @@ config PCENGINES_APU2
 	  To compile this driver as a module, choose M here: the module
 	  will be called pcengines-apuv2.
 
+config INTEL_UNCORE_FREQ_CONTROL
+	tristate "Intel Uncore frequency control driver"
+	depends on X86_64
+	help
+	  This driver allows control of uncore frequency limits on
+	  supported server platforms.
+	  Uncore frequency controls RING/LLC (last-level cache) clocks.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel-uncore-frequency.
+
 source "drivers/platform/x86/intel_speed_select_if/Kconfig"
 
 config SYSTEM76_ACPI

drivers/platform/x86/Makefile

@@ -105,3 +105,4 @@ obj-$(CONFIG_INTEL_ATOMISP2_PM)	+= intel_atomisp2_pm.o
 obj-$(CONFIG_PCENGINES_APU2)	+= pcengines-apuv2.o
 obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += intel_speed_select_if/
 obj-$(CONFIG_SYSTEM76_ACPI)	+= system76_acpi.o
+obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)	+= intel-uncore-frequency.o

drivers/platform/x86/asus-nb-wmi.c

@@ -471,6 +471,7 @@ static const struct key_entry asus_nb_wmi_keymap[] = {
 	{ KE_KEY, 0x67, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + TV */
 	{ KE_KEY, 0x6B, { KEY_TOUCHPAD_TOGGLE } },
 	{ KE_IGNORE, 0x6E, },  /* Low Battery notification */
+	{ KE_KEY, 0x71, { KEY_F13 } }, /* General-purpose button */
 	{ KE_KEY, 0x7a, { KEY_ALS_TOGGLE } }, /* Ambient Light Sensor Toggle */
 	{ KE_KEY, 0x7c, { KEY_MICMUTE } },
 	{ KE_KEY, 0x7D, { KEY_BLUETOOTH } }, /* Bluetooth Enable */

drivers/platform/x86/asus-wmi.c

@@ -61,6 +61,7 @@ MODULE_LICENSE("GPL");
 #define NOTIFY_KBD_BRTDWN		0xc5
 #define NOTIFY_KBD_BRTTOGGLE		0xc7
 #define NOTIFY_KBD_FBM			0x99
+#define NOTIFY_KBD_TTP			0xae
 
 #define ASUS_WMI_FNLOCK_BIOS_DISABLED	BIT(0)
 
@@ -81,6 +82,10 @@ MODULE_LICENSE("GPL");
 #define ASUS_FAN_BOOST_MODE_SILENT_MASK		0x02
 #define ASUS_FAN_BOOST_MODES_MASK		0x03
 
+#define ASUS_THROTTLE_THERMAL_POLICY_DEFAULT	0
+#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST	1
+#define ASUS_THROTTLE_THERMAL_POLICY_SILENT	2
+
 #define USB_INTEL_XUSB2PR		0xD0
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
 
@@ -198,6 +203,9 @@ struct asus_wmi {
 	u8 fan_boost_mode_mask;
 	u8 fan_boost_mode;
 
+	bool throttle_thermal_policy_available;
+	u8 throttle_thermal_policy_mode;
+
 	// The RSOC controls the maximum charging percentage.
 	bool battery_rsoc_available;
 
@@ -1718,6 +1726,107 @@ static ssize_t fan_boost_mode_store(struct device *dev,
 // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
 static DEVICE_ATTR_RW(fan_boost_mode);
 
+/* Throttle thermal policy ****************************************************/
+
+static int throttle_thermal_policy_check_present(struct asus_wmi *asus)
+{
+	u32 result;
+	int err;
+
+	asus->throttle_thermal_policy_available = false;
+
+	err = asus_wmi_get_devstate(asus,
+				    ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY,
+				    &result);
+	if (err) {
+		if (err == -ENODEV)
+			return 0;
+		return err;
+	}
+
+	if (result & ASUS_WMI_DSTS_PRESENCE_BIT)
+		asus->throttle_thermal_policy_available = true;
+
+	return 0;
+}
+
+static int throttle_thermal_policy_write(struct asus_wmi *asus)
+{
+	int err;
+	u8 value;
+	u32 retval;
+
+	value = asus->throttle_thermal_policy_mode;
+
+	err = asus_wmi_set_devstate(ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY,
+				    value, &retval);
+	if (err) {
+		pr_warn("Failed to set throttle thermal policy: %d\n", err);
+		return err;
+	}
+
+	if (retval != 1) {
+		pr_warn("Failed to set throttle thermal policy (retval): 0x%x\n",
+			retval);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int throttle_thermal_policy_set_default(struct asus_wmi *asus)
+{
+	if (!asus->throttle_thermal_policy_available)
+		return 0;
+
+	asus->throttle_thermal_policy_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
+	return throttle_thermal_policy_write(asus);
+}
+
+static int throttle_thermal_policy_switch_next(struct asus_wmi *asus)
+{
+	u8 new_mode = asus->throttle_thermal_policy_mode + 1;
+
+	if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT)
+		new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
+
+	asus->throttle_thermal_policy_mode = new_mode;
+	return throttle_thermal_policy_write(asus);
+}
+
+static ssize_t throttle_thermal_policy_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	u8 mode = asus->throttle_thermal_policy_mode;
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", mode);
+}
+
+static ssize_t throttle_thermal_policy_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	int result;
+	u8 new_mode;
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+
+	result = kstrtou8(buf, 10, &new_mode);
+	if (result < 0)
+		return result;
+
+	if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT)
+		return -EINVAL;
+
+	asus->throttle_thermal_policy_mode = new_mode;
+	throttle_thermal_policy_write(asus);
+
+	return count;
+}
+
+// Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent
+static DEVICE_ATTR_RW(throttle_thermal_policy);
+
 /* Backlight ******************************************************************/
 
 static int read_backlight_power(struct asus_wmi *asus)
@@ -1999,6 +2108,11 @@ static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus)
 		return;
 	}
 
+	if (asus->throttle_thermal_policy_available && code == NOTIFY_KBD_TTP) {
+		throttle_thermal_policy_switch_next(asus);
+		return;
+	}
+
 	if (is_display_toggle(code) && asus->driver->quirks->no_display_toggle)
 		return;
 
@@ -2149,6 +2263,7 @@ static struct attribute *platform_attributes[] = {
 	&dev_attr_lid_resume.attr,
 	&dev_attr_als_enable.attr,
 	&dev_attr_fan_boost_mode.attr,
+	&dev_attr_throttle_thermal_policy.attr,
 	NULL
 };
 
@@ -2172,6 +2287,8 @@ static umode_t asus_sysfs_is_visible(struct kobject *kobj,
 		devid = ASUS_WMI_DEVID_ALS_ENABLE;
 	else if (attr == &dev_attr_fan_boost_mode.attr)
 		ok = asus->fan_boost_mode_available;
+	else if (attr == &dev_attr_throttle_thermal_policy.attr)
+		ok = asus->throttle_thermal_policy_available;
 
 	if (devid != -1)
 		ok = !(asus_wmi_get_devstate_simple(asus, devid) < 0);
@@ -2431,6 +2548,12 @@ static int asus_wmi_add(struct platform_device *pdev)
 	if (err)
 		goto fail_fan_boost_mode;
 
+	err = throttle_thermal_policy_check_present(asus);
+	if (err)
+		goto fail_throttle_thermal_policy;
+	else
+		throttle_thermal_policy_set_default(asus);
+
 	err = asus_wmi_sysfs_init(asus->platform_device);
 	if (err)
 		goto fail_sysfs;
@@ -2515,6 +2638,7 @@ static int asus_wmi_add(struct platform_device *pdev)
 fail_input:
 	asus_wmi_sysfs_exit(asus->platform_device);
 fail_sysfs:
+fail_throttle_thermal_policy:
 fail_fan_boost_mode:
 fail_platform:
 	kfree(asus);

drivers/platform/x86/intel_atomisp2_pm.c

 // SPDX-License-Identifier: GPL-2.0
 /*
- * Dummy driver for Intel's Image Signal Processor found on Bay and Cherry
- * Trail devices. The sole purpose of this driver is to allow the ISP to
- * be put in D3.
+ * Dummy driver for Intel's Image Signal Processor found on Bay Trail
+ * and Cherry Trail devices. The sole purpose of this driver is to allow
+ * the ISP to be put in D3.
  *
  * Copyright (C) 2018 Hans de Goede <hdegoede@redhat.com>
  *
@@ -36,8 +36,7 @@
 static int isp_set_power(struct pci_dev *dev, bool enable)
 {
 	unsigned long timeout;
-	u32 val = enable ? ISPSSPM0_IUNIT_POWER_ON :
-		ISPSSPM0_IUNIT_POWER_OFF;
+	u32 val = enable ? ISPSSPM0_IUNIT_POWER_ON : ISPSSPM0_IUNIT_POWER_OFF;
 
 	/* Write to ISPSSPM0 bit[1:0] to power on/off the IUNIT */
 	iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0,
@@ -45,29 +44,25 @@ static int isp_set_power(struct pci_dev *dev, bool enable)
 
 	/*
 	 * There should be no IUNIT access while power-down is
-	 * in progress HW sighting: 4567865
+	 * in progress. HW sighting: 4567865.
 	 * Wait up to 50 ms for the IUNIT to shut down.
 	 * And we do the same for power on.
 	 */
 	timeout = jiffies + msecs_to_jiffies(50);
-	while (1) {
+	do {
 		u32 tmp;
 
 		/* Wait until ISPSSPM0 bit[25:24] shows the right value */
 		iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0, &tmp);
 		tmp = (tmp & ISPSSPM0_ISPSSS_MASK) >> ISPSSPM0_ISPSSS_OFFSET;
 		if (tmp == val)
-			break;
+			return 0;
 
-		if (time_after(jiffies, timeout)) {
-			dev_err(&dev->dev, "IUNIT power-%s timeout.\n",
-				enable ? "on" : "off");
-			return -EBUSY;
-		}
 		usleep_range(1000, 2000);
-	}
+	} while (time_before(jiffies, timeout));
 
-	return 0;
+	dev_err(&dev->dev, "IUNIT power-%s timeout.\n", enable ? "on" : "off");
+	return -EBUSY;
 }
 
 static int isp_probe(struct pci_dev *dev, const struct pci_device_id *id)

drivers/platform/x86/intel_mid_powerbtn.c

@@ -146,9 +146,10 @@ static int mid_pb_probe(struct platform_device *pdev)
 
 	input_set_capability(input, EV_KEY, KEY_POWER);
 
-	ddata = (struct mid_pb_ddata *)id->driver_data;
+	ddata = devm_kmemdup(&pdev->dev, (void *)id->driver_data,
+			     sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
-		return -ENODATA;
+		return -ENOMEM;
 
 	ddata->dev = &pdev->dev;
 	ddata->irq = irq;

drivers/platform/x86/intel_pmc_core.c

@@ -49,7 +49,7 @@ static const struct pmc_bit_map spt_pll_map[] = {
 	{"GEN2 USB2PCIE2 PLL",		SPT_PMC_BIT_MPHY_CMN_LANE1},
 	{"DMIPCIE3 PLL",		SPT_PMC_BIT_MPHY_CMN_LANE2},
 	{"SATA PLL",			SPT_PMC_BIT_MPHY_CMN_LANE3},
-	{},
+	{}
 };
 
 static const struct pmc_bit_map spt_mphy_map[] = {
@@ -69,7 +69,7 @@ static const struct pmc_bit_map spt_mphy_map[] = {
 	{"MPHY CORE LANE 13",          SPT_PMC_BIT_MPHY_LANE13},
 	{"MPHY CORE LANE 14",          SPT_PMC_BIT_MPHY_LANE14},
 	{"MPHY CORE LANE 15",          SPT_PMC_BIT_MPHY_LANE15},
-	{},
+	{}
 };
 
 static const struct pmc_bit_map spt_pfear_map[] = {
@@ -113,7 +113,12 @@ static const struct pmc_bit_map spt_pfear_map[] = {
 	{"CSME_SMS1",			SPT_PMC_BIT_CSME_SMS1},
 	{"CSME_RTC",			SPT_PMC_BIT_CSME_RTC},
 	{"CSME_PSF",			SPT_PMC_BIT_CSME_PSF},
-	{},
+	{}
+};
+
+static const struct pmc_bit_map *ext_spt_pfear_map[] = {
+	spt_pfear_map,
+	NULL
 };
 
 static const struct pmc_bit_map spt_ltr_show_map[] = {
@@ -142,7 +147,7 @@ static const struct pmc_bit_map spt_ltr_show_map[] = {
 };
 
 static const struct pmc_reg_map spt_reg_map = {
-	.pfear_sts = spt_pfear_map,
+	.pfear_sts = ext_spt_pfear_map,
 	.mphy_sts = spt_mphy_map,
 	.pll_sts = spt_pll_map,
 	.ltr_show_sts = spt_ltr_show_map,
@@ -186,7 +191,10 @@ static const struct pmc_bit_map cnp_pfear_map[] = {
 	{"SDX",                 BIT(4)},
 	{"SPE",                 BIT(5)},
 	{"Fuse",                BIT(6)},
-	/* Reserved for Cannon Lake but valid for Ice Lake and Comet Lake */
+	/*
+	 * Reserved for Cannon Lake but valid for Ice Lake, Comet Lake,
+	 * Tiger Lake and Elkhart Lake.
+	 */
 	{"SBR8",		BIT(7)},
 
 	{"CSME_FSC",            BIT(0)},
@@ -230,11 +238,22 @@ static const struct pmc_bit_map cnp_pfear_map[] = {
 	{"HDA_PGD4",            BIT(2)},
 	{"HDA_PGD5",            BIT(3)},
 	{"HDA_PGD6",            BIT(4)},
-	/* Reserved for Cannon Lake but valid for Ice Lake and Comet Lake */
+	/*
+	 * Reserved for Cannon Lake but valid for Ice Lake, Comet Lake,
+	 * Tiger Lake and ELkhart Lake.
+	 */
 	{"PSF6",		BIT(5)},
 	{"PSF7",		BIT(6)},
 	{"PSF8",		BIT(7)},
+	{}
+};
+
+static const struct pmc_bit_map *ext_cnp_pfear_map[] = {
+	cnp_pfear_map,
+	NULL
+};
 
+static const struct pmc_bit_map icl_pfear_map[] = {
 	/* Ice Lake generation onwards only */
 	{"RES_65",		BIT(0)},
 	{"RES_66",		BIT(1)},
@@ -247,6 +266,30 @@ static const struct pmc_bit_map cnp_pfear_map[] = {
 	{}
 };
 
+static const struct pmc_bit_map *ext_icl_pfear_map[] = {
+	cnp_pfear_map,
+	icl_pfear_map,
+	NULL
+};
+
+static const struct pmc_bit_map tgl_pfear_map[] = {
+	/* Tiger Lake and Elkhart Lake generation onwards only */
+	{"PSF9",		BIT(0)},
+	{"RES_66",		BIT(1)},
+	{"RES_67",		BIT(2)},
+	{"RES_68",		BIT(3)},
+	{"RES_69",		BIT(4)},
+	{"RES_70",		BIT(5)},
+	{"TBTLSX",		BIT(6)},
+	{}
+};
+
+static const struct pmc_bit_map *ext_tgl_pfear_map[] = {
+	cnp_pfear_map,
+	tgl_pfear_map,
+	NULL
+};
+
 static const struct pmc_bit_map cnp_slps0_dbg0_map[] = {
 	{"AUDIO_D3",		BIT(0)},
 	{"OTG_D3",		BIT(1)},
@@ -300,7 +343,7 @@ static const struct pmc_bit_map *cnp_slps0_dbg_maps[] = {
 	cnp_slps0_dbg0_map,
 	cnp_slps0_dbg1_map,
 	cnp_slps0_dbg2_map,
-	NULL,
+	NULL
 };
 
 static const struct pmc_bit_map cnp_ltr_show_map[] = {
@@ -334,7 +377,7 @@ static const struct pmc_bit_map cnp_ltr_show_map[] = {
 };
 
 static const struct pmc_reg_map cnp_reg_map = {
-	.pfear_sts = cnp_pfear_map,
+	.pfear_sts = ext_cnp_pfear_map,
 	.slp_s0_offset = CNP_PMC_SLP_S0_RES_COUNTER_OFFSET,
 	.slps0_dbg_maps = cnp_slps0_dbg_maps,
 	.ltr_show_sts = cnp_ltr_show_map,
@@ -350,7 +393,7 @@ static const struct pmc_reg_map cnp_reg_map = {
 };
 
 static const struct pmc_reg_map icl_reg_map = {
-	.pfear_sts = cnp_pfear_map,
+	.pfear_sts = ext_icl_pfear_map,
 	.slp_s0_offset = CNP_PMC_SLP_S0_RES_COUNTER_OFFSET,
 	.slps0_dbg_maps = cnp_slps0_dbg_maps,
 	.ltr_show_sts = cnp_ltr_show_map,
@@ -365,18 +408,29 @@ static const struct pmc_reg_map icl_reg_map = {
 	.ltr_ignore_max = ICL_NUM_IP_IGN_ALLOWED,
 };
 
-static inline u8 pmc_core_reg_read_byte(struct pmc_dev *pmcdev, int offset)
-{
-	return readb(pmcdev->regbase + offset);
-}
+static const struct pmc_reg_map tgl_reg_map = {
+	.pfear_sts = ext_tgl_pfear_map,
+	.slp_s0_offset = CNP_PMC_SLP_S0_RES_COUNTER_OFFSET,
+	.slps0_dbg_maps = cnp_slps0_dbg_maps,
+	.ltr_show_sts = cnp_ltr_show_map,
+	.msr_sts = msr_map,
+	.slps0_dbg_offset = CNP_PMC_SLPS0_DBG_OFFSET,
+	.ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET,
+	.regmap_length = CNP_PMC_MMIO_REG_LEN,
+	.ppfear0_offset = CNP_PMC_HOST_PPFEAR0A,
+	.ppfear_buckets = ICL_PPFEAR_NUM_ENTRIES,
+	.pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
+	.pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
+	.ltr_ignore_max = TGL_NUM_IP_IGN_ALLOWED,
+};
 
 static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset)
 {
 	return readl(pmcdev->regbase + reg_offset);
 }
 
-static inline void pmc_core_reg_write(struct pmc_dev *pmcdev, int
-							reg_offset, u32 val)
+static inline void pmc_core_reg_write(struct pmc_dev *pmcdev, int reg_offset,
+				      u32 val)
 {
 	writel(val, pmcdev->regbase + reg_offset);
 }
@@ -412,20 +466,25 @@ static int pmc_core_check_read_lock_bit(void)
 #if IS_ENABLED(CONFIG_DEBUG_FS)
 static bool slps0_dbg_latch;
 
-static void pmc_core_display_map(struct seq_file *s, int index,
-				 u8 pf_reg, const struct pmc_bit_map *pf_map)
+static inline u8 pmc_core_reg_read_byte(struct pmc_dev *pmcdev, int offset)
+{
+	return readb(pmcdev->regbase + offset);
+}
+
+static void pmc_core_display_map(struct seq_file *s, int index, int idx, int ip,
+				 u8 pf_reg, const struct pmc_bit_map **pf_map)
 {
 	seq_printf(s, "PCH IP: %-2d - %-32s\tState: %s\n",
-		   index, pf_map[index].name,
-		   pf_map[index].bit_mask & pf_reg ? "Off" : "On");
+		   ip, pf_map[idx][index].name,
+		   pf_map[idx][index].bit_mask & pf_reg ? "Off" : "On");
 }
 
 static int pmc_core_ppfear_show(struct seq_file *s, void *unused)
 {
 	struct pmc_dev *pmcdev = s->private;
-	const struct pmc_bit_map *map = pmcdev->map->pfear_sts;
+	const struct pmc_bit_map **maps = pmcdev->map->pfear_sts;
 	u8 pf_regs[PPFEAR_MAX_NUM_ENTRIES];
-	int index, iter;
+	int index, iter, idx, ip = 0;
 
 	iter = pmcdev->map->ppfear0_offset;
 
@@ -433,9 +492,12 @@ static int pmc_core_ppfear_show(struct seq_file *s, void *unused)
 	     index < PPFEAR_MAX_NUM_ENTRIES; index++, iter++)
 		pf_regs[index] = pmc_core_reg_read_byte(pmcdev, iter);
 
-	for (index = 0; map[index].name &&
-	     index < pmcdev->map->ppfear_buckets * 8; index++)
-		pmc_core_display_map(s, index, pf_regs[index / 8], map);
+	for (idx = 0; maps[idx]; idx++) {
+		for (index = 0; maps[idx][index].name &&
+		     index < pmcdev->map->ppfear_buckets * 8; ip++, index++)
+			pmc_core_display_map(s, index, idx, ip,
+					     pf_regs[index / 8], maps);
+	}
 
 	return 0;
 }
@@ -561,21 +623,22 @@ static int pmc_core_pll_show(struct seq_file *s, void *unused)
 }
 DEFINE_SHOW_ATTRIBUTE(pmc_core_pll);
 
-static ssize_t pmc_core_ltr_ignore_write(struct file *file, const char __user
-*userbuf, size_t count, loff_t *ppos)
+static ssize_t pmc_core_ltr_ignore_write(struct file *file,
+					 const char __user *userbuf,
+					 size_t count, loff_t *ppos)
 {
 	struct pmc_dev *pmcdev = &pmc;
 	const struct pmc_reg_map *map = pmcdev->map;
 	u32 val, buf_size, fd;
-	int err = 0;
+	int err;
 
 	buf_size = count < 64 ? count : 64;
-	mutex_lock(&pmcdev->lock);
 
-	if (kstrtou32_from_user(userbuf, buf_size, 10, &val)) {
-		err = -EFAULT;
-		goto out_unlock;
-	}
+	err = kstrtou32_from_user(userbuf, buf_size, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&pmcdev->lock);
 
 	if (val > map->ltr_ignore_max) {
 		err = -EINVAL;
@@ -767,8 +830,9 @@ static void pmc_core_dbgfs_register(struct pmc_dev *pmcdev)
 	debugfs_create_file("slp_s0_residency_usec", 0444, dir, pmcdev,
 			    &pmc_core_dev_state);
 
-	debugfs_create_file("pch_ip_power_gating_status", 0444, dir, pmcdev,
-			    &pmc_core_ppfear_fops);
+	if (pmcdev->map->pfear_sts)
+		debugfs_create_file("pch_ip_power_gating_status", 0444, dir,
+				    pmcdev, &pmc_core_ppfear_fops);
 
 	debugfs_create_file("ltr_ignore", 0644, dir, pmcdev,
 			    &pmc_core_ltr_ignore_ops);
@@ -816,19 +880,22 @@ static const struct x86_cpu_id intel_pmc_core_ids[] = {
 	INTEL_CPU_FAM6(ICELAKE_NNPI, icl_reg_map),
 	INTEL_CPU_FAM6(COMETLAKE, cnp_reg_map),
 	INTEL_CPU_FAM6(COMETLAKE_L, cnp_reg_map),
+	INTEL_CPU_FAM6(TIGERLAKE_L, tgl_reg_map),
+	INTEL_CPU_FAM6(TIGERLAKE, tgl_reg_map),
+	INTEL_CPU_FAM6(ATOM_TREMONT, tgl_reg_map),
 	{}
 };
 
 MODULE_DEVICE_TABLE(x86cpu, intel_pmc_core_ids);
 
 static const struct pci_device_id pmc_pci_ids[] = {
-	{ PCI_VDEVICE(INTEL, SPT_PMC_PCI_DEVICE_ID), 0},
-	{ 0, },
+	{ PCI_VDEVICE(INTEL, SPT_PMC_PCI_DEVICE_ID) },
+	{ }
 };
 
 /*
  * This quirk can be used on those platforms where
- * the platform BIOS enforces 24Mhx Crystal to shutdown
+ * the platform BIOS enforces 24Mhz crystal to shutdown
  * before PMC can assert SLP_S0#.
  */
 static int quirk_xtal_ignore(const struct dmi_system_id *id)

drivers/platform/x86/intel_pmc_core.h

@@ -186,6 +186,8 @@ enum ppfear_regs {
 #define ICL_NUM_IP_IGN_ALLOWED			20
 #define ICL_PMC_LTR_WIGIG			0x1BFC
 
+#define TGL_NUM_IP_IGN_ALLOWED			22
+
 struct pmc_bit_map {
 	const char *name;
 	u32 bit_mask;
@@ -213,7 +215,7 @@ struct pmc_bit_map {
  * captures them to have a common implementation.
  */
 struct pmc_reg_map {
-	const struct pmc_bit_map *pfear_sts;
+	const struct pmc_bit_map **pfear_sts;
 	const struct pmc_bit_map *mphy_sts;
 	const struct pmc_bit_map *pll_sts;
 	const struct pmc_bit_map **slps0_dbg_maps;

drivers/platform/x86/intel_pmc_ipc.c

@@ -12,23 +12,13 @@
  */
 
 #include <linux/acpi.h>
-#include <linux/atomic.h>
-#include <linux/bitops.h>
 #include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/io-64-nonatomic-lo-hi.h>
-#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/notifier.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
-#include <linux/pm.h>
-#include <linux/pm_qos.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/suspend.h>
 
 #include <asm/intel_pmc_ipc.h>
 
@@ -184,11 +174,6 @@ static inline void ipc_data_writel(u32 data, u32 offset)
 	writel(data, ipcdev.ipc_base + IPC_WRITE_BUFFER + offset);
 }
 
-static inline u8 __maybe_unused ipc_data_readb(u32 offset)
-{
-	return readb(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
-}
-
 static inline u32 ipc_data_readl(u32 offset)
 {
 	return readl(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
@@ -210,35 +195,6 @@ static inline int is_gcr_valid(u32 offset)
 	return 0;
 }
 
-/**
- * intel_pmc_gcr_read() - Read a 32-bit PMC GCR register
- * @offset:	offset of GCR register from GCR address base
- * @data:	data pointer for storing the register output
- *
- * Reads the 32-bit PMC GCR register at given offset.
- *
- * Return:	negative value on error or 0 on success.
- */
-int intel_pmc_gcr_read(u32 offset, u32 *data)
-{
-	int ret;
-
-	spin_lock(&ipcdev.gcr_lock);
-
-	ret = is_gcr_valid(offset);
-	if (ret < 0) {
-		spin_unlock(&ipcdev.gcr_lock);
-		return ret;
-	}
-
-	*data = readl(ipcdev.gcr_mem_base + offset);
-
-	spin_unlock(&ipcdev.gcr_lock);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(intel_pmc_gcr_read);
-
 /**
  * intel_pmc_gcr_read64() - Read a 64-bit PMC GCR register
  * @offset:	offset of GCR register from GCR address base
@@ -268,36 +224,6 @@ int intel_pmc_gcr_read64(u32 offset, u64 *data)
 }
 EXPORT_SYMBOL_GPL(intel_pmc_gcr_read64);
 
-/**
- * intel_pmc_gcr_write() - Write PMC GCR register
- * @offset:	offset of GCR register from GCR address base
- * @data:	register update value
- *
- * Writes the PMC GCR register of given offset with given
- * value.
- *
- * Return:	negative value on error or 0 on success.
- */
-int intel_pmc_gcr_write(u32 offset, u32 data)
-{
-	int ret;
-
-	spin_lock(&ipcdev.gcr_lock);
-
-	ret = is_gcr_valid(offset);
-	if (ret < 0) {
-		spin_unlock(&ipcdev.gcr_lock);
-		return ret;
-	}
-
-	writel(data, ipcdev.gcr_mem_base + offset);
-
-	spin_unlock(&ipcdev.gcr_lock);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(intel_pmc_gcr_write);
-
 /**
  * intel_pmc_gcr_update() - Update PMC GCR register bits
  * @offset:	offset of GCR register from GCR address base
@@ -309,7 +235,7 @@ EXPORT_SYMBOL_GPL(intel_pmc_gcr_write);
  *
  * Return:	negative value on error or 0 on success.
  */
-int intel_pmc_gcr_update(u32 offset, u32 mask, u32 val)
+static int intel_pmc_gcr_update(u32 offset, u32 mask, u32 val)
 {
 	u32 new_val;
 	int ret = 0;
@@ -339,7 +265,6 @@ int intel_pmc_gcr_update(u32 offset, u32 mask, u32 val)
 	spin_unlock(&ipcdev.gcr_lock);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(intel_pmc_gcr_update);
 
 static int update_no_reboot_bit(void *priv, bool set)
 {
@@ -405,7 +330,7 @@ static int intel_pmc_ipc_check_status(void)
  *
  * Return:	an IPC error code or 0 on success.
  */
-int intel_pmc_ipc_simple_command(int cmd, int sub)
+static int intel_pmc_ipc_simple_command(int cmd, int sub)
 {
 	int ret;
 
@@ -420,7 +345,6 @@ int intel_pmc_ipc_simple_command(int cmd, int sub)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(intel_pmc_ipc_simple_command);
 
 /**
  * intel_pmc_ipc_raw_cmd() - IPC command with data and pointers
@@ -437,7 +361,7 @@ EXPORT_SYMBOL_GPL(intel_pmc_ipc_simple_command);
  *
  * Return:	an IPC error code or 0 on success.
  */
-int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen, u32 *out,
+static int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen, u32 *out,
 				 u32 outlen, u32 dptr, u32 sptr)
 {
 	u32 wbuf[4] = { 0 };
@@ -470,7 +394,6 @@ int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen, u32 *out,
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(intel_pmc_ipc_raw_cmd);
 
 /**
  * intel_pmc_ipc_command() -  IPC command with input/output data
@@ -579,6 +502,7 @@ static ssize_t intel_pmc_ipc_simple_cmd_store(struct device *dev,
 	}
 	return (ssize_t)count;
 }
+static DEVICE_ATTR(simplecmd, 0200, NULL, intel_pmc_ipc_simple_cmd_store);
 
 static ssize_t intel_pmc_ipc_northpeak_store(struct device *dev,
 					     struct device_attribute *attr,
@@ -588,8 +512,9 @@ static ssize_t intel_pmc_ipc_northpeak_store(struct device *dev,
 	int subcmd;
 	int ret;
 
-	if (kstrtoul(buf, 0, &val))
-		return -EINVAL;
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
 
 	if (val)
 		subcmd = 1;
@@ -602,11 +527,7 @@ static ssize_t intel_pmc_ipc_northpeak_store(struct device *dev,
 	}
 	return (ssize_t)count;
 }
-
-static DEVICE_ATTR(simplecmd, S_IWUSR,
-		   NULL, intel_pmc_ipc_simple_cmd_store);
-static DEVICE_ATTR(northpeak, S_IWUSR,
-		   NULL, intel_pmc_ipc_northpeak_store);
+static DEVICE_ATTR(northpeak, 0200, NULL, intel_pmc_ipc_northpeak_store);
 
 static struct attribute *intel_ipc_attrs[] = {
 	&dev_attr_northpeak.attr,
@@ -618,6 +539,11 @@ static const struct attribute_group intel_ipc_group = {
 	.attrs = intel_ipc_attrs,
 };
 
+static const struct attribute_group *intel_ipc_groups[] = {
+	&intel_ipc_group,
+	NULL
+};
+
 static struct resource punit_res_array[] = {
 	/* Punit BIOS */
 	{
@@ -958,18 +884,10 @@ static int ipc_plat_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 
-	ret = sysfs_create_group(&pdev->dev.kobj, &intel_ipc_group);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to create sysfs group %d\n",
-			ret);
-		goto err_sys;
-	}
-
 	ipcdev.has_gcr_regs = true;
 
 	return 0;
-err_sys:
-	devm_free_irq(&pdev->dev, ipcdev.irq, &ipcdev);
+
 err_irq:
 	platform_device_unregister(ipcdev.tco_dev);
 	platform_device_unregister(ipcdev.punit_dev);
@@ -980,7 +898,6 @@ static int ipc_plat_probe(struct platform_device *pdev)
 
 static int ipc_plat_remove(struct platform_device *pdev)
 {
-	sysfs_remove_group(&pdev->dev.kobj, &intel_ipc_group);
 	devm_free_irq(&pdev->dev, ipcdev.irq, &ipcdev);
 	platform_device_unregister(ipcdev.tco_dev);
 	platform_device_unregister(ipcdev.punit_dev);
@@ -995,6 +912,7 @@ static struct platform_driver ipc_plat_driver = {
 	.driver = {
 		.name = "pmc-ipc-plat",
 		.acpi_match_table = ACPI_PTR(ipc_acpi_ids),
+		.dev_groups = intel_ipc_groups,
 	},
 };
 

drivers/platform/x86/intel_speed_select_if/isst_if_common.c

@@ -50,6 +50,8 @@ static const struct isst_valid_cmd_ranges isst_valid_cmds[] = {
 	{0x7F, 0x00, 0x0B},
 	{0x7F, 0x10, 0x12},
 	{0x7F, 0x20, 0x23},
+	{0x94, 0x03, 0x03},
+	{0x95, 0x03, 0x03},
 };
 
 static const struct isst_cmd_set_req_type isst_cmd_set_reqs[] = {
@@ -59,6 +61,7 @@ static const struct isst_cmd_set_req_type isst_cmd_set_reqs[] = {
 	{0xD0, 0x03, 0x08},
 	{0x7F, 0x02, 0x00},
 	{0x7F, 0x08, 0x00},
+	{0x95, 0x03, 0x03},
 };
 
 struct isst_cmd {

drivers/platform/x86/intel_telemetry_debugfs.c

@@ -686,13 +686,14 @@ static ssize_t telem_pss_trc_verb_write(struct file *file,
 	u32 verbosity;
 	int err;
 
-	if (kstrtou32_from_user(userbuf, count, 0, &verbosity))
-		return -EFAULT;
+	err = kstrtou32_from_user(userbuf, count, 0, &verbosity);
+	if (err)
+		return err;
 
 	err = telemetry_set_trace_verbosity(TELEM_PSS, verbosity);
 	if (err) {
 		pr_err("Changing PSS Trace Verbosity Failed. Error %d\n", err);
-		count = err;
+		return err;
 	}
 
 	return count;
@@ -733,13 +734,14 @@ static ssize_t telem_ioss_trc_verb_write(struct file *file,
 	u32 verbosity;
 	int err;
 
-	if (kstrtou32_from_user(userbuf, count, 0, &verbosity))
-		return -EFAULT;
+	err = kstrtou32_from_user(userbuf, count, 0, &verbosity);
+	if (err)
+		return err;
 
 	err = telemetry_set_trace_verbosity(TELEM_IOSS, verbosity);
 	if (err) {
 		pr_err("Changing IOSS Trace Verbosity Failed. Error %d\n", err);
-		count = err;
+		return err;
 	}
 
 	return count;

drivers/platform/x86/intel_telemetry_pltdrv.c

@@ -1117,9 +1117,9 @@ static const struct telemetry_core_ops telm_pltops = {
 
 static int telemetry_pltdrv_probe(struct platform_device *pdev)
 {
-	struct resource *res0 = NULL, *res1 = NULL;
 	const struct x86_cpu_id *id;
-	int size, ret = -ENOMEM;
+	void __iomem *mem;
+	int ret;
 
 	id = x86_match_cpu(telemetry_cpu_ids);
 	if (!id)
@@ -1127,50 +1127,17 @@ static int telemetry_pltdrv_probe(struct platform_device *pdev)
 
 	telm_conf = (struct telemetry_plt_config *)id->driver_data;
 
-	res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res0) {
-		ret = -EINVAL;
-		goto out;
-	}
-	size = resource_size(res0);
-	if (!devm_request_mem_region(&pdev->dev, res0->start, size,
-				     pdev->name)) {
-		ret = -EBUSY;
-		goto out;
-	}
-	telm_conf->pss_config.ssram_base_addr = res0->start;
-	telm_conf->pss_config.ssram_size = size;
+	mem = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(mem))
+		return PTR_ERR(mem);
 
-	res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res1) {
-		ret = -EINVAL;
-		goto out;
-	}
-	size = resource_size(res1);
-	if (!devm_request_mem_region(&pdev->dev, res1->start, size,
-				     pdev->name)) {
-		ret = -EBUSY;
-		goto out;
-	}
+	telm_conf->pss_config.regmap = mem;
 
-	telm_conf->ioss_config.ssram_base_addr = res1->start;
-	telm_conf->ioss_config.ssram_size = size;
+	mem = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(mem))
+		return PTR_ERR(mem);
 
-	telm_conf->pss_config.regmap = ioremap_nocache(
-					telm_conf->pss_config.ssram_base_addr,
-					telm_conf->pss_config.ssram_size);
-	if (!telm_conf->pss_config.regmap) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	telm_conf->ioss_config.regmap = ioremap_nocache(
-				telm_conf->ioss_config.ssram_base_addr,
-				telm_conf->ioss_config.ssram_size);
-	if (!telm_conf->ioss_config.regmap) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	telm_conf->ioss_config.regmap = mem;
 
 	mutex_init(&telm_conf->telem_lock);
 	mutex_init(&telm_conf->telem_trace_lock);
@@ -1188,14 +1155,6 @@ static int telemetry_pltdrv_probe(struct platform_device *pdev)
 	return 0;
 
 out:
-	if (res0)
-		release_mem_region(res0->start, resource_size(res0));
-	if (res1)
-		release_mem_region(res1->start, resource_size(res1));
-	if (telm_conf->pss_config.regmap)
-		iounmap(telm_conf->pss_config.regmap);
-	if (telm_conf->ioss_config.regmap)
-		iounmap(telm_conf->ioss_config.regmap);
 	dev_err(&pdev->dev, "TELEMETRY Setup Failed.\n");
 
 	return ret;
@@ -1204,9 +1163,6 @@ static int telemetry_pltdrv_probe(struct platform_device *pdev)
 static int telemetry_pltdrv_remove(struct platform_device *pdev)
 {
 	telemetry_clear_pltdata();
-	iounmap(telm_conf->pss_config.regmap);
-	iounmap(telm_conf->ioss_config.regmap);
-
 	return 0;
 }
 

drivers/platform/x86/touchscreen_dmi.c

@@ -219,8 +219,7 @@ static const struct property_entry digma_citi_e200_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1980),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1500),
 	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl1686-digma_citi_e200.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-digma_citi_e200.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	PROPERTY_ENTRY_BOOL("silead,home-button"),
 	{ }
@@ -236,8 +235,7 @@ static const struct property_entry gp_electronic_t701_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 640),
 	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
 	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl1680-gp-electronic-t701.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-gp-electronic-t701.fw"),
 	{ }
 };
 
@@ -382,8 +380,7 @@ static const struct property_entry onda_v80_plus_v3_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1698),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
 	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl3676-onda-v80-plus-v3.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-onda-v80-plus-v3.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	PROPERTY_ENTRY_BOOL("silead,home-button"),
 	{ }
@@ -398,8 +395,7 @@ static const struct property_entry onda_v820w_32g_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1665),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
 	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl1680-onda-v820w-32g.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-onda-v820w-32g.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	PROPERTY_ENTRY_BOOL("silead,home-button"),
 	{ }
@@ -415,8 +411,7 @@ static const struct property_entry onda_v891w_v1_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-min-y",  8),
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1676),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1130),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl3680-onda-v891w-v1.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-onda-v891w-v1.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	PROPERTY_ENTRY_BOOL("silead,home-button"),
 	{ }
@@ -433,8 +428,7 @@ static const struct property_entry onda_v891w_v3_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1625),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1135),
 	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl3676-onda-v891w-v3.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-onda-v891w-v3.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	PROPERTY_ENTRY_BOOL("silead,home-button"),
 	{ }
@@ -450,8 +444,7 @@ static const struct property_entry pipo_w2s_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 880),
 	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
 	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl1680-pipo-w2s.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-pipo-w2s.fw"),
 	{ }
 };
 
@@ -460,14 +453,29 @@ static const struct ts_dmi_data pipo_w2s_data = {
 	.properties	= pipo_w2s_props,
 };
 
+static const struct property_entry pipo_w11_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 1),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 15),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1984),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1532),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-pipo-w11.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data pipo_w11_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= pipo_w11_props,
+};
+
 static const struct property_entry pov_mobii_wintab_p800w_v20_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-min-x", 32),
 	PROPERTY_ENTRY_U32("touchscreen-min-y", 16),
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1692),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1146),
 	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl3680-pov-mobii-wintab-p800w-v20.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-pov-mobii-wintab-p800w-v20.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	PROPERTY_ENTRY_BOOL("silead,home-button"),
 	{ }
@@ -484,8 +492,7 @@ static const struct property_entry pov_mobii_wintab_p800w_v21_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1794),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1148),
 	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl3692-pov-mobii-wintab-p800w.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-pov-mobii-wintab-p800w.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	PROPERTY_ENTRY_BOOL("silead,home-button"),
 	{ }
@@ -502,8 +509,7 @@ static const struct property_entry pov_mobii_wintab_p1006w_v10_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1984),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1520),
 	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl3692-pov-mobii-wintab-p1006w-v10.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-pov-mobii-wintab-p1006w-v10.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	PROPERTY_ENTRY_BOOL("silead,home-button"),
 	{ }
@@ -520,8 +526,7 @@ static const struct property_entry schneider_sct101ctm_props[] = {
 	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
 	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
 	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl1680-schneider-sct101ctm.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-schneider-sct101ctm.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	PROPERTY_ENTRY_BOOL("silead,home-button"),
 	{ }
@@ -551,8 +556,7 @@ static const struct property_entry teclast_x98plus2_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1280),
 	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
 	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl1686-teclast_x98plus2.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-teclast_x98plus2.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	{ }
 };
@@ -566,8 +570,7 @@ static const struct property_entry trekstor_primebook_c11_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1970),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1530),
 	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl1680-trekstor-primebook-c11.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-trekstor-primebook-c11.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	PROPERTY_ENTRY_BOOL("silead,home-button"),
 	{ }
@@ -581,8 +584,7 @@ static const struct ts_dmi_data trekstor_primebook_c11_data = {
 static const struct property_entry trekstor_primebook_c13_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 2624),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1920),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl1680-trekstor-primebook-c13.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-trekstor-primebook-c13.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	PROPERTY_ENTRY_BOOL("silead,home-button"),
 	{ }
@@ -596,8 +598,7 @@ static const struct ts_dmi_data trekstor_primebook_c13_data = {
 static const struct property_entry trekstor_primetab_t13b_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 2500),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1900),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl1680-trekstor-primetab-t13b.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-trekstor-primetab-t13b.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	PROPERTY_ENTRY_BOOL("silead,home-button"),
 	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
@@ -613,8 +614,7 @@ static const struct property_entry trekstor_surftab_twin_10_1_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1900),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1280),
 	PROPERTY_ENTRY_U32("touchscreen-inverted-y", 1),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl3670-surftab-twin-10-1-st10432-8.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3670-surftab-twin-10-1-st10432-8.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	{ }
 };
@@ -629,8 +629,7 @@ static const struct property_entry trekstor_surftab_wintron70_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-min-y", 8),
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 884),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 632),
-	PROPERTY_ENTRY_STRING("firmware-name",
-			      "gsl1686-surftab-wintron70-st70416-6.fw"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-surftab-wintron70-st70416-6.fw"),
 	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
 	PROPERTY_ENTRY_BOOL("silead,home-button"),
 	{ }
@@ -909,6 +908,16 @@ static const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "W2S"),
 		},
 	},
+	{
+		/* Pipo W11 */
+		.driver_data = (void *)&pipo_w11_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "PIPO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "To be filled by O.E.M."),
+			/* Above matches are too generic, add bios-ver match */
+			DMI_MATCH(DMI_BIOS_VERSION, "JS-BI-10.6-SF133GR300-GA55B-024-F"),
+		},
+	},
 	{
 		/* Ployer Momo7w (same hardware as the Trekstor ST70416-6) */
 		.driver_data = (void *)&trekstor_surftab_wintron70_data,
@@ -1032,8 +1041,7 @@ static const struct dmi_system_id touchscreen_dmi_table[] = {
 		.driver_data = (void *)&trekstor_surftab_wintron70_data,
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "TrekStor"),
-			DMI_MATCH(DMI_PRODUCT_NAME,
-					     "SurfTab wintron 7.0 ST70416-6"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SurfTab wintron 7.0 ST70416-6"),
 			/* Exact match, different versions need different fw */
 			DMI_MATCH(DMI_BIOS_VERSION, "TREK.G.WI71C.JGBMRBA05"),
 		},

include/linux/platform_data/mlxreg.h

@@ -101,6 +101,7 @@ struct mlxreg_core_data {
  * @aggr_mask: group aggregation mask;
  * @reg: group interrupt status register;
  * @mask: group interrupt mask;
+ * @capability: group capability register;
  * @cache: last status value for elements fro the same group;
  * @count: number of available elements in the group;
  * @ind: element's index inside the group;
@@ -112,6 +113,7 @@ struct mlxreg_core_item {
 	u32 aggr_mask;
 	u32 reg;
 	u32 mask;
+	u32 capability;
 	u32 cache;
 	u8 count;
 	u8 ind;

include/linux/platform_data/x86/asus-wmi.h

@@ -58,6 +58,7 @@
 #define ASUS_WMI_DEVID_LIGHT_SENSOR	0x00050022 /* ?? */
 #define ASUS_WMI_DEVID_LIGHTBAR		0x00050025
 #define ASUS_WMI_DEVID_FAN_BOOST_MODE	0x00110018
+#define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY 0x00120075
 
 /* Misc */
 #define ASUS_WMI_DEVID_CAMERA		0x00060013

tools/power/x86/intel-speed-select/isst-config.c

@@ -15,7 +15,7 @@ struct process_cmd_struct {
 	int arg;
 };
 
-static const char *version_str = "v1.1";
+static const char *version_str = "v1.2";
 static const int supported_api_ver = 1;
 static struct isst_if_platform_info isst_platform_info;
 static char *progname;
@@ -1384,14 +1384,10 @@ static void set_pbf_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
 		goto disp_result;
 	}
 
-	if (auto_mode) {
-		if (status) {
+	if (auto_mode && status) {
 		ret = set_pbf_core_power(cpu);
 		if (ret)
 			goto disp_result;
-		} else {
-			isst_pm_qos_config(cpu, 0, 0);
-		}
 	}
 
 	ret = isst_set_pbf_fact_status(cpu, 1, status);
@@ -1408,6 +1404,9 @@ static void set_pbf_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
 		}
 	}
 
+	if (auto_mode && !status)
+		isst_pm_qos_config(cpu, 0, 0);
+
 disp_result:
 	if (status)
 		isst_display_result(cpu, outf, "base-freq", "enable",
@@ -1496,14 +1495,10 @@ static void set_fact_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
 	int ret;
 	int status = *(int *)arg4;
 
-	if (auto_mode) {
-		if (status) {
+	if (auto_mode && status) {
 		ret = isst_pm_qos_config(cpu, 1, 1);
 		if (ret)
 			goto disp_results;
-		} else {
-			isst_pm_qos_config(cpu, 0, 0);
-		}
 	}
 
 	ret = isst_set_pbf_fact_status(cpu, 0, status);
@@ -1524,6 +1519,9 @@ static void set_fact_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
 			ret = isst_set_trl(cpu, fact_trl);
 		if (ret && auto_mode)
 			isst_pm_qos_config(cpu, 0, 0);
+	} else {
+		if (auto_mode)
+			isst_pm_qos_config(cpu, 0, 0);
 	}
 
 disp_results:
@@ -1638,7 +1636,7 @@ static void set_fact_enable(int arg)
 			if (ret)
 				goto error_disp;
 		}
-		isst_display_result(i, outf, "turbo-freq --auto", "enable", 0);
+		isst_display_result(-1, outf, "turbo-freq --auto", "enable", 0);
 	}
 
 	return;

tools/power/x86/intel-speed-select/isst-core.c

@@ -6,6 +6,44 @@
 
 #include "isst.h"
 
+int isst_write_pm_config(int cpu, int cp_state)
+{
+	unsigned int req, resp;
+	int ret;
+
+	if (cp_state)
+		req = BIT(16);
+	else
+		req = 0;
+
+	ret = isst_send_mbox_command(cpu, WRITE_PM_CONFIG, PM_FEATURE, 0, req,
+				     &resp);
+	if (ret)
+		return ret;
+
+	debug_printf("cpu:%d WRITE_PM_CONFIG resp:%x\n", cpu, resp);
+
+	return 0;
+}
+
+int isst_read_pm_config(int cpu, int *cp_state, int *cp_cap)
+{
+	unsigned int resp;
+	int ret;
+
+	ret = isst_send_mbox_command(cpu, READ_PM_CONFIG, PM_FEATURE, 0, 0,
+				     &resp);
+	if (ret)
+		return ret;
+
+	debug_printf("cpu:%d READ_PM_CONFIG resp:%x\n", cpu, resp);
+
+	*cp_state = resp & BIT(16);
+	*cp_cap = resp & BIT(0) ? 1 : 0;
+
+	return 0;
+}
+
 int isst_get_ctdp_levels(int cpu, struct isst_pkg_ctdp *pkg_dev)
 {
 	unsigned int resp;
@@ -36,6 +74,7 @@ int isst_get_ctdp_levels(int cpu, struct isst_pkg_ctdp *pkg_dev)
 int isst_get_ctdp_control(int cpu, int config_index,
 			  struct isst_pkg_ctdp_level_info *ctdp_level)
 {
+	int cp_state, cp_cap;
 	unsigned int resp;
 	int ret;
 
@@ -50,6 +89,15 @@ int isst_get_ctdp_control(int cpu, int config_index,
 	ctdp_level->fact_enabled = !!(resp & BIT(16));
 	ctdp_level->pbf_enabled = !!(resp & BIT(17));
 
+	ret = isst_read_pm_config(cpu, &cp_state, &cp_cap);
+	if (ret) {
+		debug_printf("cpu:%d pm_config is not supported \n", cpu);
+	} else {
+		debug_printf("cpu:%d pm_config SST-CP state:%d cap:%d \n", cpu, cp_state, cp_cap);
+		ctdp_level->sst_cp_support = cp_cap;
+		ctdp_level->sst_cp_enabled = cp_state;
+	}
+
 	debug_printf(
 		"cpu:%d CONFIG_TDP_GET_TDP_CONTROL resp:%x fact_support:%d pbf_support: %d fact_enabled:%d pbf_enabled:%d\n",
 		cpu, resp, ctdp_level->fact_support, ctdp_level->pbf_support,
@@ -779,6 +827,13 @@ int isst_pm_qos_config(int cpu, int enable_clos, int priority_type)
 			debug_printf("Turbo-freq feature must be disabled first\n");
 			return -EINVAL;
 		}
+		ret = isst_write_pm_config(cpu, 0);
+		if (ret)
+			perror("isst_write_pm_config\n");
+	} else {
+		ret = isst_write_pm_config(cpu, 1);
+		if (ret)
+			perror("isst_write_pm_config\n");
 	}
 
 	ret = isst_send_mbox_command(cpu, CONFIG_CLOS, CLOS_PM_QOS_CONFIG, 0, 0,

tools/power/x86/intel-speed-select/isst-display.c

@@ -418,6 +418,17 @@ void isst_ctdp_display_information(int cpu, FILE *outf, int tdp_level,
 			snprintf(value, sizeof(value), "unsupported");
 		format_and_print(outf, base_level + 4, header, value);
 
+		snprintf(header, sizeof(header),
+			 "speed-select-core-power");
+		if (ctdp_level->sst_cp_support) {
+			if (ctdp_level->sst_cp_enabled)
+				snprintf(value, sizeof(value), "enabled");
+			else
+				snprintf(value, sizeof(value), "disabled");
+		} else
+			snprintf(value, sizeof(value), "unsupported");
+		format_and_print(outf, base_level + 4, header, value);
+
 		if (is_clx_n_platform()) {
 			if (ctdp_level->pbf_support)
 				_isst_pbf_display_information(cpu, outf,
@@ -634,6 +645,7 @@ void isst_display_result(int cpu, FILE *outf, char *feature, char *cmd,
 	char header[256];
 	char value[256];
 
+	if (cpu >= 0) {
 		snprintf(header, sizeof(header), "package-%d",
 			 get_physical_package_id(cpu));
 		format_and_print(outf, 1, header, NULL);
@@ -641,6 +653,7 @@ void isst_display_result(int cpu, FILE *outf, char *feature, char *cmd,
 		format_and_print(outf, 2, header, NULL);
 		snprintf(header, sizeof(header), "cpu-%d", cpu);
 		format_and_print(outf, 3, header, NULL);
+	}
 	snprintf(header, sizeof(header), "%s", feature);
 	format_and_print(outf, 4, header, NULL);
 	snprintf(header, sizeof(header), "%s", cmd);

tools/power/x86/intel-speed-select/isst.h

@@ -69,6 +69,10 @@
 #define PM_CLOS_OFFSET				0x08
 #define PQR_ASSOC_OFFSET			0x20
 
+#define READ_PM_CONFIG				0x94
+#define WRITE_PM_CONFIG				0x95
+#define PM_FEATURE				0x03
+
 #define DISP_FREQ_MULTIPLIER 100
 
 struct isst_clos_config {
@@ -119,6 +123,8 @@ struct isst_pkg_ctdp_level_info {
 	int pbf_support;
 	int fact_enabled;
 	int pbf_enabled;
+	int sst_cp_support;
+	int sst_cp_enabled;
 	int tdp_ratio;
 	int active;
 	int tdp_control;