arm64: dts: broadcom: Fix I2C and SPI bus warnings

[ Upstream commit 7cdbe45d ]

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (i2c_bus_reg): /hsls/i2c@e0000/pcf8574@20: I2C bus unit address format error, expected "27"
arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dtb: Warning (i2c_bus_reg): /hsls/i2c@e0000/pcf8574@20: I2C bus unit address format error, expected "27"
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (spi_bus_bridge): /hsls/ssp@180000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (spi_bus_bridge): /hsls/ssp@190000: node name for SPI buses should be 'spi'

Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi

@@ -639,7 +639,7 @@ uart3: serial@66130000 {
 			status = "disabled";
 		};
 
-		ssp0: ssp@66180000 {
+		ssp0: spi@66180000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x66180000 0x1000>;
 			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
@@ -650,7 +650,7 @@ ssp0: ssp@66180000 {
 			status = "disabled";
 		};
 
-		ssp1: ssp@66190000 {
+		ssp1: spi@66190000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x66190000 0x1000>;
 			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi

@@ -138,7 +138,7 @@ pca9505: pca9505@20 {
 &i2c1 {
 	status = "okay";
 
-	pcf8574: pcf8574@20 {
+	pcf8574: pcf8574@27 {
 		compatible = "nxp,pcf8574a";
 		gpio-controller;
 		#gpio-cells = <2>;

arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi

@@ -520,7 +520,7 @@ uart3: uart@130000 {
 			status = "disabled";
 		};
 
-		ssp0: ssp@180000 {
+		ssp0: spi@180000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x00180000 0x1000>;
 			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
@@ -532,7 +532,7 @@ ssp0: ssp@180000 {
 			status = "disabled";
 		};
 
-		ssp1: ssp@190000 {
+		ssp1: spi@190000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x00190000 0x1000>;
 			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;