Merge samba.org:/scratch/anton/linux-2.5

into samba.org:/scratch/anton/linux-2.5_ppc64_new

drivers/hotplug/cpqphp.h

@@ -305,8 +305,8 @@ struct controller {
 	u8 first_slot;
 	u8 add_support;
 	u8 push_flag;
-	u8 speed;			/* 0 = 33MHz, 1 = 66MHz */
-	u8 speed_capability;		/* 0 = 33MHz, 1 = 66MHz */
+	enum pci_bus_speed speed;
+	enum pci_bus_speed speed_capability;
 	u8 push_button;			/* 0 = no pushbutton, 1 = pushbutton present */
 	u8 slot_switch_type;		/* 0 = no switch, 1 = switch present */
 	u8 defeature_PHP;		/* 0 = PHP not supported, 1 = PHP supported */
@@ -321,9 +321,6 @@ struct controller {
 	wait_queue_head_t queue;	/* sleep & wake process */
 };
 
-#define CTRL_SPEED_33MHz	0
-#define CTRL_SPEED_66MHz	1
-
 struct irq_mapping {
 	u8 barber_pole;
 	u8 valid_INT;
@@ -635,7 +632,7 @@ static inline u8 get_controller_speed (struct controller *ctrl)
 	u16 misc;
 	
 	misc = readw(ctrl->hpc_reg + MISC);
-	return (misc & 0x0800) ? 1 : 0;
+	return (misc & 0x0800) ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
 }
 
 

drivers/hotplug/cpqphp_core.c

@@ -79,6 +79,8 @@ static int get_power_status	(struct hotplug_slot *slot, u8 *value);
 static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
+static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
+static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 
 static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
 	.owner =		THIS_MODULE,
@@ -90,6 +92,8 @@ static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
 	.get_attention_status =	get_attention_status,
 	.get_latch_status =	get_latch_status,
 	.get_adapter_status =	get_adapter_status,
+  	.get_max_bus_speed =	get_max_bus_speed,
+  	.get_cur_bus_speed =	get_cur_bus_speed,
 };
 
 
@@ -378,7 +382,7 @@ static int ctrl_slot_setup (struct controller * ctrl, void *smbios_start, void *
 			new_slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
 		if (is_slot66mhz(new_slot))
 			new_slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
-		if (ctrl->speed == 1)
+		if (ctrl->speed == PCI_SPEED_66MHz)
 			new_slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
 
 		ctrl_slot = slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
@@ -782,6 +786,44 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
 	return 0;
 }
 
+static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+{
+	struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
+	struct controller *ctrl;
+	
+	if (slot == NULL)
+		return -ENODEV;
+
+	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
+
+	ctrl = slot->ctrl;
+	if (ctrl == NULL)
+		return -ENODEV;
+	
+	*value = ctrl->speed_capability;
+
+	return 0;
+}
+
+static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+{
+	struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
+	struct controller *ctrl;
+	
+	if (slot == NULL)
+		return -ENODEV;
+
+	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
+
+	ctrl = slot->ctrl;
+	if (ctrl == NULL)
+		return -ENODEV;
+	
+	*value = ctrl->speed;
+
+	return 0;
+}
+
 static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	u8 num_of_slots = 0;
@@ -853,7 +895,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 					case PCI_SUB_HPC_ID:
 						/* Original 6500/7000 implementation */
 						ctrl->slot_switch_type = 1;		// Switch is present
-						ctrl->speed_capability = CTRL_SPEED_33MHz;
+						ctrl->speed_capability = PCI_SPEED_33MHz;
 						ctrl->push_button = 0;			// No pushbutton
 						ctrl->pci_config_space = 1;		// Index/data access to working registers 0 = not supported, 1 = supported
 						ctrl->defeature_PHP = 1;		// PHP is supported
@@ -864,7 +906,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 						/* First Pushbutton implementation */
 						ctrl->push_flag = 1;
 						ctrl->slot_switch_type = 1;		// Switch is present
-						ctrl->speed_capability = CTRL_SPEED_33MHz;
+						ctrl->speed_capability = PCI_SPEED_33MHz;
 						ctrl->push_button = 1;			// Pushbutton is present
 						ctrl->pci_config_space = 1;		// Index/data access to working registers 0 = not supported, 1 = supported
 						ctrl->defeature_PHP = 1;		// PHP is supported
@@ -874,7 +916,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 					case PCI_SUB_HPC_ID_INTC:
 						/* Third party (6500/7000) */
 						ctrl->slot_switch_type = 1;		// Switch is present
-						ctrl->speed_capability = CTRL_SPEED_33MHz;
+						ctrl->speed_capability = PCI_SPEED_33MHz;
 						ctrl->push_button = 0;			// No pushbutton
 						ctrl->pci_config_space = 1;		// Index/data access to working registers 0 = not supported, 1 = supported
 						ctrl->defeature_PHP = 1;			// PHP is supported
@@ -885,7 +927,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 						/* First 66 Mhz implementation */
 						ctrl->push_flag = 1;
 						ctrl->slot_switch_type = 1;		// Switch is present
-						ctrl->speed_capability = CTRL_SPEED_66MHz;
+						ctrl->speed_capability = PCI_SPEED_66MHz;
 						ctrl->push_button = 1;			// Pushbutton is present
 						ctrl->pci_config_space = 1;		// Index/data access to working registers 0 = not supported, 1 = supported
 						ctrl->defeature_PHP = 1;		// PHP is supported
@@ -903,9 +945,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			case PCI_VENDOR_ID_INTEL:
 				/* Check for speed capability (0=33, 1=66) */
 				if (subsystem_deviceid & 0x0001) {
-					ctrl->speed_capability = CTRL_SPEED_66MHz;
+					ctrl->speed_capability = PCI_SPEED_66MHz;
 				} else {
-					ctrl->speed_capability = CTRL_SPEED_33MHz;
+					ctrl->speed_capability = PCI_SPEED_33MHz;
 				}
 
 				/* Check for push button */
@@ -982,7 +1024,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	info("Initializing the PCI hot plug controller residing on PCI bus %d\n", pdev->bus->number);
 
 	dbg ("Hotplug controller capabilities:\n");
-	dbg ("    speed_capability       %s\n", ctrl->speed_capability == CTRL_SPEED_33MHz ? "33MHz" : "66Mhz");
+	dbg ("    speed_capability       %s\n", ctrl->speed_capability == PCI_SPEED_33MHz ? "33MHz" : "66Mhz");
 	dbg ("    slot_switch_type       %s\n", ctrl->slot_switch_type == 0 ? "no switch" : "switch present");
 	dbg ("    defeature_PHP          %s\n", ctrl->defeature_PHP == 0 ? "PHP not supported" : "PHP supported");
 	dbg ("    alternate_base_address %s\n", ctrl->alternate_base_address == 0 ? "not supported" : "supported");

drivers/hotplug/cpqphp_ctrl.c

@@ -1187,7 +1187,7 @@ static u32 board_replaced(struct pci_func * func, struct controller * ctrl)
 		//*********************************
 		rc = CARD_FUNCTIONING;
 	} else {
-		if (ctrl->speed == 1) {
+		if (ctrl->speed == PCI_SPEED_66MHz) {
 			// Wait for exclusive access to hardware
 			down(&ctrl->crit_sect);
 
@@ -1385,7 +1385,7 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
 	dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n",
 	    __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot);
 
-	if (ctrl->speed == 1) {
+	if (ctrl->speed == PCI_SPEED_66MHz) {
 		// Wait for exclusive access to hardware
 		down(&ctrl->crit_sect);
 

drivers/hotplug/ibmphp_core.c

@@ -384,14 +384,15 @@ static int get_adapter_present (struct hotplug_slot *hotplug_slot, u8 * value)
 	debug ("get_adapter_present - Exit rc[%d] hpcrc[%x] value[%x]\n", rc, hpcrc, *value);
 	return rc;
 }
-/*
-static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, u8 * value)
+
+static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
 {
 	int rc = -ENODEV;
 	struct slot *pslot;
 	u8 mode = 0;
 
-	debug ("get_max_bus_speed - Entry hotplug_slot[%lx] pvalue[%lx]\n", (ulong)hotplug_slot, (ulong) value);
+	debug ("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __FUNCTION__,
+		hotplug_slot, value);
 
 	ibmphp_lock_operations ();
 
@@ -413,25 +414,26 @@ static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, u8 * value)
 				*value = pslot->supported_speed + 0x01;
 				break;
 			default:
-*/				/* Note (will need to change): there would be soon 256, 512 also */
-/*				rc = -ENODEV;
+				/* Note (will need to change): there would be soon 256, 512 also */
+				rc = -ENODEV;
 			}
 		}
 	} else
 		rc = -ENODEV;
 
 	ibmphp_unlock_operations ();
-	debug ("get_max_bus_speed - Exit rc[%d] value[%x]\n", rc, *value);
+	debug ("%s - Exit rc[%d] value[%x]\n", __FUNCTION__, rc, *value);
 	return rc;
 }
 
-static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, u8 * value)
+static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
 {
 	int rc = -ENODEV;
 	struct slot *pslot;
 	u8 mode = 0;
 
-	debug ("get_cur_bus_speed - Entry hotplug_slot[%lx] pvalue[%lx]\n", (ulong)hotplug_slot, (ulong) value);
+	debug ("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __FUNCTION__,
+		hotplug_slot, value);
 
 	ibmphp_lock_operations ();
 
@@ -458,8 +460,8 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, u8 * value)
 					*value += 0x01;
 					break;
 				default:
-*/					/* Note of change: there would also be 256, 512 soon */
-/*					rc = -ENODEV;
+					/* Note of change: there would also be 256, 512 soon */
+					rc = -ENODEV;
 				}
 			}
 		}
@@ -467,10 +469,10 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, u8 * value)
 		rc = -ENODEV;
 
 	ibmphp_unlock_operations ();
-	debug ("get_cur_bus_speed - Exit rc[%d] value[%x]\n", rc, *value);
+	debug ("%s - Exit rc[%d] value[%x]\n", __FUNCTION__, rc, *value);
 	return rc;
 }
-
+/*
 static int get_max_adapter_speed_1 (struct hotplug_slot *hotplug_slot, u8 * value, u8 flag)
 {
 	int rc = -ENODEV;
@@ -1584,9 +1586,9 @@ struct hotplug_slot_ops ibmphp_hotplug_slot_ops = {
 	.get_attention_status =		get_attention_status,
 	.get_latch_status =		get_latch_status,
 	.get_adapter_status =		get_adapter_present,
-/*	.get_max_bus_speed_status =	get_max_bus_speed,
-	.get_max_adapter_speed_status =	get_max_adapter_speed,
-	.get_cur_bus_speed_status =	get_cur_bus_speed,
+	.get_max_bus_speed =		get_max_bus_speed,
+	.get_cur_bus_speed =		get_cur_bus_speed,
+/*	.get_max_adapter_speed =	get_max_adapter_speed,
 	.get_bus_name_status =		get_bus_name,
 */
 };

drivers/hotplug/pci_hotplug.h

@@ -29,6 +29,22 @@
 #define _PCI_HOTPLUG_H
 
 
+/* These values come from the PCI Hotplug Spec */
+enum pci_bus_speed {
+	PCI_SPEED_33MHz			= 0x00,
+	PCI_SPEED_66MHz			= 0x01,
+	PCI_SPEED_66MHz_PCIX		= 0x02,
+	PCI_SPEED_100MHz_PCIX		= 0x03,
+	PCI_SPEED_133MHz_PCIX		= 0x04,
+	PCI_SPEED_66MHz_PCIX_266	= 0x09,
+	PCI_SPEED_100MHz_PCIX_266	= 0x0a,
+	PCI_SPEED_133MHz_PCIX_266	= 0x0b,
+	PCI_SPEED_66MHz_PCIX_533	= 0x11,
+	PCI_SPEED_100MHz_PCIX_533	= 0X12,
+	PCI_SPEED_133MHz_PCIX_533	= 0x13,
+	PCI_SPEED_UNKNOWN		= 0xff,
+};
+
 struct hotplug_slot;
 struct hotplug_slot_core;
 
@@ -50,7 +66,13 @@ struct hotplug_slot_core;
  * @get_latch_status: Called to get the current latch status of a slot.
  *	If this field is NULL, the value passed in the struct hotplug_slot_info
  *	will be used when this value is requested by a user.
- * @get_adapter_present: Called to get see if an adapter is present in the slot or not.
+ * @get_adapter_status: Called to get see if an adapter is present in the slot or not.
+ *	If this field is NULL, the value passed in the struct hotplug_slot_info
+ *	will be used when this value is requested by a user.
+ * @get_max_bus_speed: Called to get the max bus speed for a slot.
+ *	If this field is NULL, the value passed in the struct hotplug_slot_info
+ *	will be used when this value is requested by a user.
+ * @get_cur_bus_speed: Called to get the current bus speed for a slot.
  *	If this field is NULL, the value passed in the struct hotplug_slot_info
  *	will be used when this value is requested by a user.
  *
@@ -69,6 +91,8 @@ struct hotplug_slot_ops {
 	int (*get_attention_status)	(struct hotplug_slot *slot, u8 *value);
 	int (*get_latch_status)		(struct hotplug_slot *slot, u8 *value);
 	int (*get_adapter_status)	(struct hotplug_slot *slot, u8 *value);
+	int (*get_max_bus_speed)	(struct hotplug_slot *slot, enum pci_bus_speed *value);
+	int (*get_cur_bus_speed)	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 };
 
 /**
@@ -85,6 +109,8 @@ struct hotplug_slot_info {
 	u8	attention_status;
 	u8	latch_status;
 	u8	adapter_status;
+	enum pci_bus_speed	max_bus_speed;
+	enum pci_bus_speed	cur_bus_speed;
 };
 
 /**

drivers/hotplug/pci_hotplug_core.c

@@ -38,6 +38,8 @@
 #include <linux/init.h>
 #include <linux/namei.h>
 #include <linux/pci.h>
+#include <linux/dnotify.h>
+#include <linux/proc_fs.h>
 #include <asm/uaccess.h>
 #include "pci_hotplug.h"
 
@@ -74,6 +76,8 @@ struct hotplug_slot_core {
 	struct dentry	*latch_dentry;
 	struct dentry	*adapter_dentry;
 	struct dentry	*test_dentry;
+	struct dentry	*max_bus_speed_dentry;
+	struct dentry	*cur_bus_speed_dentry;
 };
 
 static struct super_operations pcihpfs_ops;
@@ -86,6 +90,35 @@ static spinlock_t list_lock;
 
 LIST_HEAD(pci_hotplug_slot_list);
 
+/* these strings match up with the values in pci_bus_speed */
+static char *pci_bus_speed_strings[] = {
+	"33 MHz PCI",		/* 0x00 */
+	"66 MHz PCI",		/* 0x01 */
+	"66 MHz PCIX", 		/* 0x02 */
+	"100 MHz PCIX",		/* 0x03 */
+	"133 MHz PCIX",		/* 0x04 */
+	NULL,			/* 0x05 */
+	NULL,			/* 0x06 */
+	NULL,			/* 0x07 */
+	NULL,			/* 0x08 */
+	"66 MHz PCIX 266",	/* 0x09 */
+	"100 MHz PCIX 266",	/* 0x0a */
+	"133 MHz PCIX 266",	/* 0x0b */
+	NULL,			/* 0x0c */
+	NULL,			/* 0x0d */
+	NULL,			/* 0x0e */
+	NULL,			/* 0x0f */
+	NULL,			/* 0x10 */
+	"66 MHz PCIX 533",	/* 0x11 */
+	"100 MHz PCIX 533",	/* 0x12 */
+	"133 MHz PCIX 533",	/* 0x13 */
+};
+
+#ifdef CONFIG_PROC_FS		
+extern struct proc_dir_entry *proc_bus_pci_dir;
+static struct proc_dir_entry *slotdir = NULL;
+static const char *slotdir_name = "slots";
+#endif
 
 static struct inode *pcihpfs_get_inode (struct super_block *sb, int mode, int dev)
 {
@@ -274,6 +307,24 @@ static struct file_operations presence_file_operations = {
 	.llseek =	default_file_lseek,
 };
 
+/* file ops for the "max bus speed" files */
+static ssize_t max_bus_speed_read_file (struct file *file, char *buf, size_t count, loff_t *offset);
+static struct file_operations max_bus_speed_file_operations = {
+	read:		max_bus_speed_read_file,
+	write:		default_write_file,
+	open:		default_open,
+	llseek:		default_file_lseek,
+};
+
+/* file ops for the "current bus speed" files */
+static ssize_t cur_bus_speed_read_file (struct file *file, char *buf, size_t count, loff_t *offset);
+static struct file_operations cur_bus_speed_file_operations = {
+	read:		cur_bus_speed_read_file,
+	write:		default_write_file,
+	open:		default_open,
+	llseek:		default_file_lseek,
+};
+
 /* file ops for the "test" files */
 static ssize_t test_write_file (struct file *file, const char *buf, size_t count, loff_t *ppos);
 static struct file_operations test_file_operations = {
@@ -501,26 +552,28 @@ static void fs_remove_file (struct dentry *dentry)
 	up(&parent->d_inode->i_sem);
 }
 
-#define GET_STATUS(name)	\
-static int get_##name##_status (struct hotplug_slot *slot, u8 *value)	\
+#define GET_STATUS(name,type)	\
+static int get_##name (struct hotplug_slot *slot, type *value)		\
 {									\
 	struct hotplug_slot_ops *ops = slot->ops;			\
 	int retval = 0;							\
 	if (ops->owner)							\
 		__MOD_INC_USE_COUNT(ops->owner);			\
-	if (ops->get_##name##_status)					\
-		retval = ops->get_##name##_status (slot, value);	\
+	if (ops->get_##name)						\
+		retval = ops->get_##name (slot, value);			\
 	else								\
-		*value = slot->info->name##_status;			\
+		*value = slot->info->name;				\
 	if (ops->owner)							\
 		__MOD_DEC_USE_COUNT(ops->owner);			\
 	return retval;							\
 }
 
-GET_STATUS(power)
-GET_STATUS(attention)
-GET_STATUS(latch)
-GET_STATUS(adapter)
+GET_STATUS(power_status, u8)
+GET_STATUS(attention_status, u8)
+GET_STATUS(latch_status, u8)
+GET_STATUS(adapter_status, u8)
+GET_STATUS(max_bus_speed, enum pci_bus_speed)
+GET_STATUS(cur_bus_speed, enum pci_bus_speed)
 
 static ssize_t power_read_file (struct file *file, char *buf, size_t count, loff_t *offset)
 {
@@ -575,7 +628,7 @@ static ssize_t power_write_file (struct file *file, const char *ubuff, size_t co
 
 	if (*offset < 0)
 		return -EINVAL;
-	if (count <= 0)
+	if (count == 0 || count > 16384)
 		return 0;
 	if (*offset != 0)
 		return 0;
@@ -686,7 +739,7 @@ static ssize_t attention_write_file (struct file *file, const char *ubuff, size_
 
 	if (*offset < 0)
 		return -EINVAL;
-	if (count <= 0)
+	if (count == 0 || count > 16384)
 		return 0;
 	if (*offset != 0)
 		return 0;
@@ -769,7 +822,6 @@ static ssize_t latch_read_file (struct file *file, char *buf, size_t count, loff
 	return retval;
 }
 
-
 static ssize_t presence_read_file (struct file *file, char *buf, size_t count, loff_t *offset)
 {
 	struct hotplug_slot *slot = file->private_data;
@@ -813,6 +865,108 @@ static ssize_t presence_read_file (struct file *file, char *buf, size_t count, l
 	return retval;
 }
 
+static char *unknown_speed = "Unknown bus speed";
+
+static ssize_t max_bus_speed_read_file (struct file *file, char *buf, size_t count, loff_t *offset)
+{
+	struct hotplug_slot *slot = file->private_data;
+	unsigned char *page;
+	char *speed_string;
+	int retval;
+	int len = 0;
+	enum pci_bus_speed value;
+	
+	dbg ("count = %d, offset = %lld\n", count, *offset);
+
+	if (*offset < 0)
+		return -EINVAL;
+	if (count <= 0)
+		return 0;
+	if (*offset != 0)
+		return 0;
+
+	if (slot == NULL) {
+		dbg("slot == NULL???\n");
+		return -ENODEV;
+	}
+
+	page = (unsigned char *)__get_free_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
+
+	retval = get_max_bus_speed (slot, &value);
+	if (retval)
+		goto exit;
+
+	if (value == PCI_SPEED_UNKNOWN)
+		speed_string = unknown_speed;
+	else
+		speed_string = pci_bus_speed_strings[value];
+	
+	len = sprintf (page, "%s\n", speed_string);
+
+	if (copy_to_user (buf, page, len)) {
+		retval = -EFAULT;
+		goto exit;
+	}
+	*offset += len;
+	retval = len;
+
+exit:
+	free_page((unsigned long)page);
+	return retval;
+}
+
+static ssize_t cur_bus_speed_read_file (struct file *file, char *buf, size_t count, loff_t *offset)
+{
+	struct hotplug_slot *slot = file->private_data;
+	unsigned char *page;
+	char *speed_string;
+	int retval;
+	int len = 0;
+	enum pci_bus_speed value;
+
+	dbg ("count = %d, offset = %lld\n", count, *offset);
+
+	if (*offset < 0)
+		return -EINVAL;
+	if (count <= 0)
+		return 0;
+	if (*offset != 0)
+		return 0;
+
+	if (slot == NULL) {
+		dbg("slot == NULL???\n");
+		return -ENODEV;
+	}
+
+	page = (unsigned char *)__get_free_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
+
+	retval = get_cur_bus_speed (slot, &value);
+	if (retval)
+		goto exit;
+
+	if (value == PCI_SPEED_UNKNOWN)
+		speed_string = unknown_speed;
+	else
+		speed_string = pci_bus_speed_strings[value];
+	
+	len = sprintf (page, "%s\n", speed_string);
+
+	if (copy_to_user (buf, page, len)) {
+		retval = -EFAULT;
+		goto exit;
+	}
+	*offset += len;
+	retval = len;
+
+exit:
+	free_page((unsigned long)page);
+	return retval;
+}
+
 static ssize_t test_write_file (struct file *file, const char *ubuff, size_t count, loff_t *offset)
 {
 	struct hotplug_slot *slot = file->private_data;
@@ -823,7 +977,7 @@ static ssize_t test_write_file (struct file *file, const char *ubuff, size_t cou
 
 	if (*offset < 0)
 		return -EINVAL;
-	if (count <= 0)
+	if (count == 0 || count > 16384)
 		return 0;
 	if (*offset != 0)
 		return 0;
@@ -876,27 +1030,54 @@ static int fs_add_slot (struct hotplug_slot *slot)
 					   S_IFDIR | S_IXUGO | S_IRUGO,
 					   NULL, NULL, NULL);
 	if (core->dir_dentry != NULL) {
-		core->power_dentry = fs_create_file ("power",
+		if ((slot->ops->enable_slot) ||
+		    (slot->ops->disable_slot) ||
+		    (slot->ops->get_power_status))
+			core->power_dentry = 
+				fs_create_file ("power",
 						S_IFREG | S_IRUGO | S_IWUSR,
 						core->dir_dentry, slot,
 						&power_file_operations);
 
-		core->attention_dentry = fs_create_file ("attention",
+		if ((slot->ops->set_attention_status) ||
+		    (slot->ops->get_attention_status))
+			core->attention_dentry =
+				fs_create_file ("attention",
 						S_IFREG | S_IRUGO | S_IWUSR,
 						core->dir_dentry, slot,
 						&attention_file_operations);
 
-		core->latch_dentry = fs_create_file ("latch",
+		if (slot->ops->get_latch_status)
+			core->latch_dentry = 
+				fs_create_file ("latch",
 						S_IFREG | S_IRUGO,
 						core->dir_dentry, slot,
 						&latch_file_operations);
 
-		core->adapter_dentry = fs_create_file ("adapter",
+		if (slot->ops->get_adapter_status)
+			core->adapter_dentry = 
+				fs_create_file ("adapter",
 						S_IFREG | S_IRUGO,
 						core->dir_dentry, slot,
 						&presence_file_operations);
 
-		core->test_dentry = fs_create_file ("test",
+		if (slot->ops->get_max_bus_speed)
+			core->max_bus_speed_dentry = 
+				fs_create_file ("max_bus_speed",
+						S_IFREG | S_IRUGO,
+						core->dir_dentry, slot,
+						&max_bus_speed_file_operations);
+
+		if (slot->ops->get_cur_bus_speed)
+			core->cur_bus_speed_dentry =
+				fs_create_file ("cur_bus_speed",
+						S_IFREG | S_IRUGO,
+						core->dir_dentry, slot,
+						&cur_bus_speed_file_operations);
+
+		if (slot->ops->hardware_test)
+			core->test_dentry =
+				fs_create_file ("test",
 						S_IFREG | S_IRUGO | S_IWUSR,
 						core->dir_dentry, slot,
 						&test_file_operations);
@@ -917,6 +1098,10 @@ static void fs_remove_slot (struct hotplug_slot *slot)
 			fs_remove_file (core->latch_dentry);
 		if (core->adapter_dentry)
 			fs_remove_file (core->adapter_dentry);
+		if (core->max_bus_speed_dentry)
+			fs_remove_file (core->max_bus_speed_dentry);
+		if (core->cur_bus_speed_dentry)
+			fs_remove_file (core->cur_bus_speed_dentry);
 		if (core->test_dentry)
 			fs_remove_file (core->test_dentry);
 		fs_remove_file (core->dir_dentry);
@@ -969,6 +1154,7 @@ int pci_hp_register (struct hotplug_slot *slot)
 		return -EINVAL;
 	}
 
+	memset (core, 0, sizeof (struct hotplug_slot_core));
 	slot->core_priv = core;
 
 	list_add (&slot->slot_list, &pci_hotplug_slot_list);
@@ -1012,10 +1198,13 @@ int pci_hp_deregister (struct hotplug_slot *slot)
 	return 0;
 }
 
-static inline void update_inode_time (struct inode *inode)
+static inline void update_dentry_inode_time (struct dentry *dentry)
 {
-	if (inode)
-		inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+	struct inode *inode = dentry->d_inode;
+	if (inode) {
+		inode->i_mtime = CURRENT_TIME;
+		dnotify_parent(dentry, DN_MODIFY);
+	}
 }
 
 /**
@@ -1050,16 +1239,19 @@ int pci_hp_change_slot_info (const char *name, struct hotplug_slot_info *info)
 	core = temp->core_priv;
 	if ((core->power_dentry) &&
 	    (temp->info->power_status != info->power_status))
-		update_inode_time (core->power_dentry->d_inode);
+		update_dentry_inode_time (core->power_dentry);
 	if ((core->attention_dentry) &&
 	    (temp->info->attention_status != info->attention_status))
-		update_inode_time (core->attention_dentry->d_inode);
+		update_dentry_inode_time (core->attention_dentry);
 	if ((core->latch_dentry) &&
 	    (temp->info->latch_status != info->latch_status))
-		update_inode_time (core->latch_dentry->d_inode);
+		update_dentry_inode_time (core->latch_dentry);
 	if ((core->adapter_dentry) &&
 	    (temp->info->adapter_status != info->adapter_status))
-		update_inode_time (core->adapter_dentry->d_inode);
+		update_dentry_inode_time (core->adapter_dentry);
+	if ((core->cur_bus_speed_dentry) &&
+	    (temp->info->cur_bus_speed != info->cur_bus_speed))
+		update_dentry_inode_time (core->cur_bus_speed_dentry);
 
 	memcpy (temp->info, info, sizeof (struct hotplug_slot_info));
 	spin_unlock (&list_lock);
@@ -1080,6 +1272,11 @@ static int __init pci_hotplug_init (void)
 		goto exit;
 	}
 
+#ifdef CONFIG_PROC_FS
+	/* create mount point for pcihpfs */
+	slotdir = proc_mkdir(slotdir_name, proc_bus_pci_dir);
+#endif
+
 	info (DRIVER_DESC " version: " DRIVER_VERSION "\n");
 
 exit:
@@ -1089,6 +1286,11 @@ static int __init pci_hotplug_init (void)
 static void __exit pci_hotplug_exit (void)
 {
 	unregister_filesystem(&pcihpfs_type);
+
+#ifdef CONFIG_PROC_FS
+	if (slotdir)
+		remove_proc_entry(slotdir_name, proc_bus_pci_dir);
+#endif
 }
 
 module_init(pci_hotplug_init);

drivers/pci/proc.c

@@ -371,7 +371,7 @@ static struct seq_operations proc_bus_pci_devices_op = {
 	show:	show_device
 };
 
-static struct proc_dir_entry *proc_bus_pci_dir;
+struct proc_dir_entry *proc_bus_pci_dir;
 
 /* driverfs files */
 static ssize_t pci_show_irq(struct device * dev, char * buf, size_t count, loff_t off)
@@ -621,5 +621,6 @@ EXPORT_SYMBOL(pci_proc_attach_device);
 EXPORT_SYMBOL(pci_proc_detach_device);
 EXPORT_SYMBOL(pci_proc_attach_bus);
 EXPORT_SYMBOL(pci_proc_detach_bus);
+EXPORT_SYMBOL(proc_bus_pci_dir);
 #endif
 

kernel/exit.c

@@ -610,7 +610,6 @@ NORET_TYPE void do_exit(long code)
 	if (tsk->pid == 1)
 		panic("Attempted to kill init!");
 	tsk->flags |= PF_EXITING;
-	if (timer_pending(&tsk->real_timer))
 	del_timer_sync(&tsk->real_timer);
 
 	if (unlikely(preempt_count()))

kernel/ksyms.c

@@ -53,6 +53,7 @@
 #include <linux/root_dev.h>
 #include <linux/percpu.h>
 #include <linux/smp_lock.h>
+#include <linux/dnotify.h>
 #include <asm/checksum.h>
 
 #if defined(CONFIG_PROC_FS)
@@ -560,6 +561,7 @@ EXPORT_SYMBOL(buffer_insert_list);
 EXPORT_SYMBOL(make_bad_inode);
 EXPORT_SYMBOL(is_bad_inode);
 EXPORT_SYMBOL(event);
+EXPORT_SYMBOL(__inode_dir_notify);
 
 #ifdef CONFIG_UID16
 EXPORT_SYMBOL(overflowuid);