ARM: PRIMA2: add CSR SiRFmarco device tree .dts

SiRFmarco is a dual-core cortex-a9 SMP SoC from CSR. this patch
adds the .dtsi and a basic evb board .dts for it.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>

Documentation/devicetree/bindings/arm/sirf.txt

-prima2 "cb" evaluation board
+CSR SiRFprimaII and SiRFmarco device tree bindings.
+========================================
+
 Required root node properties:
-    - compatible = "sirf,prima2-cb", "sirf,prima2";
+    - compatible:
+    - "sirf,prima2-cb" : prima2 "cb" evaluation board
+    - "sirf,marco-cb" : marco "cb" evaluation board
+    - "sirf,prima2" : prima2 device based board
+    - "sirf,marco" : marco device based board

arch/arm/boot/dts/marco-evb.dts

+/*
+ * DTS file for CSR SiRFmarco Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "marco.dtsi"
+
+/ {
+	model = "CSR SiRFmarco Evaluation Board";
+	compatible = "sirf,marco-cb", "sirf,marco";
+
+	memory {
+		reg = <0x40000000 0x60000000>;
+	};
+
+	axi {
+		peri-iobg {
+			uart1: uart@cc060000 {
+				status = "okay";
+			};
+			uart2: uart@cc070000 {
+				status = "okay";
+			};
+			i2c0: i2c@cc0e0000 {
+			      status = "okay";
+			      fpga-cpld@4d {
+				      compatible = "sirf,fpga-cpld";
+				      reg = <0x4d>;
+			      };
+			};
+			spi1: spi@cc170000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins_a>;
+				spi@0 {
+					compatible = "spidev";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+			pci-iobg {
+				sd0: sdhci@cd000000 {
+					bus-width = <8>;
+					status = "okay";
+				};
+			};
+		};
+	};
+};