Skip to content

L
linux
Commit 097032ac authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files
Options

Merge kroah.com:/home/greg/linux/BK/bleed-2.6 

into kroah.com:/home/greg/linux/BK/usb-2.6
parents 4d1ae8c5 bbc53b7d
Show whitespace changes
Inline Side-by-side
Showing with 1272 additions and 736 deletions
Documentation/usb/philips.txt
View file @ 097032ac
This file contains some additional information for the Philips webcams.
E-mail: webcam@smcc.demon.nl Last updated: 2001-09-24
The main webpage for the Philips driver is http://www.smcc.demon.nl/webcam/.
It contains a lot of extra information, a FAQ, and the binary plugin
'PWCX'. This plugin contains decompression routines that allow you to
use higher image sizes and framerates; in addition the webcam uses less
bandwidth on the USB bus (handy if you want to run more than 1 camera
simultaneously). These routines fall under an NDA, and may therefor not be
distributed as source; however, its use is completely optional.
This file contains some additional information for the Philips and OEM webcams.
E-mail: webcam@smcc.demon.nl Last updated: 2004-01-19
Site: http://www.smcc.demon.nl/webcam/
As of this moment, the following cameras are supported:
* Philips PCA645
* Philips PCA646
* Philips PCVC675
* Philips PCVC680
* Philips PCVC690
* Philips PCVC720/40
* Philips PCVC730
* Philips PCVC740
* Philips PCVC750
* Askey VC010
* Creative Labs Webcam 5
* Creative Labs Webcam Pro Ex
* Logitech QuickCam 3000 Pro
* Logitech QuickCam 4000 Pro
* Logitech QuickCam Notebook Pro
* Logitech QuickCam Zoom
* Logitech QuickCam Orbit
* Logitech QuickCam Sphere
* Samsung MPC-C10
* Samsung MPC-C30
* Sotec Afina Eye
* AME CU-001
* Visionite VCS-UM100
* Visionite VCS-UC300
The main webpage for the Philips driver is at the address above. It contains
a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin
contains decompression routines that allow you to use higher image sizes and
framerates; in addition the webcam uses less bandwidth on the USB bus (handy
if you want to run more than 1 camera simultaneously). These routines fall
under a NDA, and may therefor not be distributed as source; however, its use
is completely optional.
You can build this code either into your kernel, or as a module. I recommend
the latter, since it makes troubleshooting a lot easier. The built-in
......@@ -27,14 +54,14 @@ fps
Specifies the desired framerate. Is an integer in the range of 4-30.
fbufs
This parameter specifies the number of internal buffers to use for storing
This paramter specifies the number of internal buffers to use for storing
frames from the cam. This will help if the process that reads images from
the cam is a bit slow or momentarily busy. However, on slow machines it
the cam is a bit slow or momentarely busy. However, on slow machines it
only introduces lag, so choose carefully. The default is 3, which is
reasonable. You can set it between 2 and 5.
mbufs
This is an integer between 1 and 4. It will tell the module the number of
This is an integer between 1 and 10. It will tell the module the number of
buffers to reserve for mmap(), VIDIOCCGMBUF, VIDIOCMCAPTURE and friends.
The default is 2, which is adequate for most applications (double
buffering).
......@@ -45,9 +72,9 @@ mbufs
slack when your program is behind. But you need a multi-threaded or
forked program to really take advantage of these buffers.
The absolute maximum is 4, but don't set it too high! Every buffer takes
up 1.22 MB of RAM, so unless you have a lot of memory setting this to
something more than 2 is an absolute waste. This memory is only
The absolute maximum is 10, but don't set it too high! Every buffer takes
up 460 KB of RAM, so unless you have a lot of memory setting this to
something more than 4 is an absolute waste. This memory is only
allocated during open(), so nothing is wasted when the camera is not in
use.
......@@ -75,8 +102,9 @@ compression (only useful with the plugin)
See the FAQ on the website for an overview of which modes require
compression.
The compression parameter only applies to the Vesta & ToUCam cameras.
The 645 and 646 have fixed compression parameters.
The compression parameter does not apply to the 645 and 646 cameras
and OEM models derived from those (only a few). Most cams honour this
parameter.
leds
This settings takes 2 integers, that define the on/off time for the LED
......@@ -89,14 +117,17 @@ leds
leds=0,0
the LED never goes on, making it suitable for silent survaillance.
the LED never goes on, making it suitable for silent surveillance.
By default the camera's LED is on solid while in use, and turned off
when the camera is not used anymore.
This parameter works only with the ToUCam range of cameras (730, 740,
750). For other cameras this command is silently ignored, and the LED
cannot be controlled.
This parameter works only with the ToUCam range of cameras (720, 730, 740,
750) and OEMs. For other cameras this command is silently ignored, and
the LED cannot be controlled.
Finally: this parameters does not take effect UNTIL the first time you
open the camera device. Until then, the LED remains on.
dev_hint
A long standing problem with USB devices is their dynamic nature: you
......@@ -126,7 +157,7 @@ dev_hint
other cameras will get the first free
available slot (see below).
dev_hint=645:1,680=2 The PCA645 camera will get /dev/video1,
dev_hint=645:1,680:2 The PCA645 camera will get /dev/video1,
and a PCVC680 /dev/video2.
dev_hint=645.0123:3,645.4567:0 The PCA645 camera with serialnumber
......@@ -176,13 +207,16 @@ trace
64 0x40 Show viewport and image sizes Off
128 0x80 PWCX debugging Off
For example, to trace the open() & read() fuctions, sum 8 + 4 = 12,
so you would supply trace=12 during insmod or modprobe. If
you want to turn the initialization and probing tracing off, set trace=0.
The default value for trace is 35 (0x23).
Example:
Example:
# modprobe pwc size=cif fps=15 power_save=1
......@@ -192,7 +226,7 @@ cameras. Each camera has its own set of buffers.
size and fps only specify defaults when you open() the device; this is to
accommodate some tools that don't set the size. You can change these
settings after open() with the Video4Linux ioctl() calls. The default of
defaults is QCIF size at 10 fps, BGR order.
defaults is QCIF size at 10 fps.
The compression parameter is semiglobal; it sets the initial compression
preference for all camera's, but this parameter can be set per camera with
......@@ -200,4 +234,3 @@ the VIDIOCPWCSCQUAL ioctl() call.
All parameters are optional.
drivers/usb/class/cdc-acm.c
View file @ 097032ac
......@@ -5,6 +5,7 @@
* Copyright (c) 1999 Pavel Machek <pavel@suse.cz>
* Copyright (c) 1999 Johannes Erdfelt <johannes@erdfelt.com>
* Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2004 Oliver Neukum <oliver@neukum.name>
*
* USB Abstract Control Model driver for USB modems and ISDN adapters
*
......@@ -60,6 +61,7 @@
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
#include "cdc-acm.h"
......@@ -108,7 +110,7 @@ static void acm_ctrl_irq(struct urb *urb, struct pt_regs *regs)
{
struct acm *acm = urb->context;
struct usb_ctrlrequest *dr = urb->transfer_buffer;
unsigned char *data = (unsigned char *)(dr + 1);
unsigned char *data;
int newctrl;
int status;
......@@ -130,6 +132,7 @@ static void acm_ctrl_irq(struct urb *urb, struct pt_regs *regs)
if (!ACM_READY(acm))
goto exit;
data = (unsigned char *)(dr + 1);
switch (dr->bRequest) {
case ACM_IRQ_NETWORK:
......@@ -139,7 +142,7 @@ static void acm_ctrl_irq(struct urb *urb, struct pt_regs *regs)
case ACM_IRQ_LINE_STATE:
newctrl = le16_to_cpup((__u16 *) data);
newctrl = le16_to_cpu(get_unaligned((__u16 *) data));
if (acm->tty && !acm->clocal && (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) {
dbg("calling hangup");
......@@ -172,6 +175,7 @@ static void acm_ctrl_irq(struct urb *urb, struct pt_regs *regs)
static void acm_read_bulk(struct urb *urb, struct pt_regs *regs)
{
struct acm *acm = urb->context;
dbg("Entering acm_read_bulk with status %d\n", urb->status);
if (!ACM_READY(acm))
return;
......@@ -190,6 +194,7 @@ static void acm_rx_tasklet(unsigned long _acm)
struct tty_struct *tty = acm->tty;
unsigned char *data = urb->transfer_buffer;
int i = 0;
dbg("Entering acm_rx_tasklet");
if (urb->actual_length > 0 && !acm->throttle) {
for (i = 0; i < urb->actual_length && !acm->throttle; i++) {
......@@ -200,14 +205,20 @@ static void acm_rx_tasklet(unsigned long _acm)
}
tty_insert_flip_char(tty, data[i], 0);
}
dbg("Handed %d bytes to tty layer", i+1);
tty_flip_buffer_push(tty);
}
spin_lock(&acm->throttle_lock);
if (acm->throttle) {
dbg("Throtteling noticed");
memmove(data, data + i, urb->actual_length - i);
urb->actual_length -= i;
acm->resubmit_to_unthrottle = 1;
spin_unlock(&acm->throttle_lock);
return;
}
spin_unlock(&acm->throttle_lock);
urb->actual_length = 0;
urb->dev = acm->dev;
......@@ -221,6 +232,7 @@ static void acm_rx_tasklet(unsigned long _acm)
static void acm_write_bulk(struct urb *urb, struct pt_regs *regs)
{
struct acm *acm = (struct acm *)urb->context;
dbg("Entering acm_write_bulk with status %d\n", urb->status);
if (!ACM_READY(acm))
goto out;
......@@ -237,6 +249,7 @@ static void acm_softint(void *private)
{
struct acm *acm = private;
struct tty_struct *tty = acm->tty;
dbg("Entering acm_softint.\n");
if (!ACM_READY(acm))
return;
......@@ -254,6 +267,7 @@ static void acm_softint(void *private)
static int acm_tty_open(struct tty_struct *tty, struct file *filp)
{
struct acm *acm = acm_table[tty->index];
dbg("Entering acm_tty_open.\n");
if (!acm || !acm->dev)
return -EINVAL;
......@@ -279,7 +293,8 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
goto bail_out_and_unlink;
}
acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS);
if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS))
goto full_bailout;
/* force low_latency on so that our tty_push actually forces the data through,
otherwise it is scheduled, and with high data rates data can get lost. */
......@@ -290,6 +305,8 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
up(&open_sem);
return 0;
full_bailout:
usb_unlink_urb(acm->readurb);
bail_out_and_unlink:
usb_unlink_urb(acm->ctrlurb);
bail_out:
......@@ -327,6 +344,7 @@ static int acm_tty_write(struct tty_struct *tty, int from_user, const unsigned c
{
struct acm *acm = tty->driver_data;
int stat;
dbg("Entering acm_tty_write to write %d bytes from %s space,\n", count, from_user ? "user" : "kernel");
if (!ACM_READY(acm))
return -EINVAL;
......@@ -337,11 +355,13 @@ static int acm_tty_write(struct tty_struct *tty, int from_user, const unsigned c
count = (count > acm->writesize) ? acm->writesize : count;
dbg("Get %d bytes from %s space...", count, from_user ? "user" : "kernel");
if (from_user) {
if (copy_from_user(acm->writeurb->transfer_buffer, (void __user *)buf, count))
if (copy_from_user(acm->write_buffer, (void __user *)buf, count))
return -EFAULT;
} else
memcpy(acm->writeurb->transfer_buffer, buf, count);
memcpy(acm->write_buffer, buf, count);
dbg(" Successfully copied.\n");
acm->writeurb->transfer_buffer_length = count;
acm->writeurb->dev = acm->dev;
......@@ -378,7 +398,9 @@ static void acm_tty_throttle(struct tty_struct *tty)
struct acm *acm = tty->driver_data;
if (!ACM_READY(acm))
return;
spin_lock_bh(&acm->throttle_lock);
acm->throttle = 1;
spin_unlock_bh(&acm->throttle_lock);
}
static void acm_tty_unthrottle(struct tty_struct *tty)
......@@ -386,9 +408,13 @@ static void acm_tty_unthrottle(struct tty_struct *tty)
struct acm *acm = tty->driver_data;
if (!ACM_READY(acm))
return;
spin_lock_bh(&acm->throttle_lock);
acm->throttle = 0;
if (acm->readurb->status != -EINPROGRESS)
spin_unlock_bh(&acm->throttle_lock);
if (acm->resubmit_to_unthrottle) {
acm->resubmit_to_unthrottle = 0;
acm_read_bulk(acm->readurb, NULL);
}
}
static void acm_tty_break_ctl(struct tty_struct *tty, int state)
......@@ -510,7 +536,11 @@ static int acm_probe (struct usb_interface *intf,
struct acm *acm;
int minor;
int ctrlsize,readsize;
char *buf;
u8 *buf;
u8 ac_management_function = 0;
u8 call_management_function = 0;
int call_interface_num = -1;
int data_interface_num;
if (!buffer) {
err("Wierd descriptor references");
......@@ -531,6 +561,18 @@ static int acm_probe (struct usb_interface *intf,
}
union_header = (struct union_desc *)buffer;
break;
case CDC_COUNTRY_TYPE: /* maybe somehow export */
break; /* for now we ignore it */
case CDC_AC_MANAGEMENT_TYPE:
ac_management_function = buffer[3];
break;
case CDC_CALL_MANAGEMENT_TYPE:
call_management_function = buffer[3];
call_interface_num = buffer[4];
if ((call_management_function & 3) != 3)
err("This device cannot do calls on its own. It is no modem.");
break;
default:
err("Ignoring extra header");
break;
......@@ -546,12 +588,15 @@ static int acm_probe (struct usb_interface *intf,
}
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
data_interface = usb_ifnum_to_if(usb_dev, union_header->bSlaveInterface0);
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
if (!control_interface || !data_interface) {
dev_dbg(&intf->dev,"no interfaces\n");
return -ENODEV;
}
if (data_interface_num != call_interface_num)
dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.");
if (usb_interface_claimed(data_interface)) { /* valid in this context */
dev_dbg(&intf->dev,"The data interface isn't available\n");
return -EBUSY;
......@@ -598,7 +643,7 @@ static int acm_probe (struct usb_interface *intf,
if (!(acm = kmalloc(sizeof(struct acm), GFP_KERNEL))) {
dev_dbg(&intf->dev, "out of memory (acm kmalloc)\n");
return -ENOMEM;
goto alloc_fail;
}
memset(acm, 0, sizeof(struct acm));
......@@ -609,54 +654,66 @@ static int acm_probe (struct usb_interface *intf,
acm->data = data_interface;
acm->minor = minor;
acm->dev = usb_dev;
acm->ctrl_caps = ac_management_function;
acm->ctrlsize = ctrlsize;
acm->readsize = readsize;
acm->bh.func = acm_rx_tasklet;
acm->bh.data = (unsigned long) acm;
INIT_WORK(&acm->work, acm_softint, acm);
spin_lock_init(&acm->throttle_lock);
acm->ready_for_write = 1;
buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
if (!buf) {
dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n");
goto alloc_fail2;
}
acm->ctrl_buffer = buf;
if (!(buf = kmalloc(ctrlsize + readsize + acm->writesize, GFP_KERNEL))) {
dev_dbg(&intf->dev, "out of memory (buf kmalloc)\n");
kfree(acm);
return -ENOMEM;
buf = usb_buffer_alloc(usb_dev, readsize, GFP_KERNEL, &acm->read_dma);
if (!buf) {
dev_dbg(&intf->dev, "out of memory (read buffer alloc)\n");
goto alloc_fail3;
}
acm->read_buffer = buf;
buf = usb_buffer_alloc(usb_dev, acm->writesize, GFP_KERNEL, &acm->write_dma);
if (!buf) {
dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n");
goto alloc_fail4;
}
acm->write_buffer = buf;
acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->ctrlurb) {
dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n");
kfree(acm);
kfree(buf);
return -ENOMEM;
goto alloc_fail5;
}
acm->readurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->readurb) {
dev_dbg(&intf->dev, "out of memory (readurb kmalloc)\n");
usb_free_urb(acm->ctrlurb);
kfree(acm);
kfree(buf);
return -ENOMEM;
goto alloc_fail6;
}
acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->writeurb) {
dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)\n");
usb_free_urb(acm->readurb);
usb_free_urb(acm->ctrlurb);
kfree(acm);
kfree(buf);
return -ENOMEM;
goto alloc_fail7;
}
usb_fill_int_urb(acm->ctrlurb, usb_dev, usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
buf, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval);
acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval);
acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
acm->ctrlurb->transfer_dma = acm->ctrl_dma;
usb_fill_bulk_urb(acm->readurb, usb_dev, usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress),
buf += ctrlsize, readsize, acm_read_bulk, acm);
acm->readurb->transfer_flags |= URB_NO_FSBR;
acm->read_buffer, readsize, acm_read_bulk, acm);
acm->readurb->transfer_flags |= URB_NO_FSBR | URB_NO_TRANSFER_DMA_MAP;
acm->readurb->transfer_dma = acm->read_dma;
usb_fill_bulk_urb(acm->writeurb, usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
buf += readsize, acm->writesize, acm_write_bulk, acm);
acm->writeurb->transfer_flags |= URB_NO_FSBR;
acm->write_buffer, acm->writesize, acm_write_bulk, acm);
acm->writeurb->transfer_flags |= URB_NO_FSBR | URB_NO_TRANSFER_DMA_MAP;
acm->writeurb->transfer_dma = acm->write_dma;
dev_info(&intf->dev, "ttyACM%d: USB ACM device\n", minor);
......@@ -673,17 +730,34 @@ static int acm_probe (struct usb_interface *intf,
acm_table[minor] = acm;
usb_set_intfdata (intf, acm);
return 0;
alloc_fail7:
usb_free_urb(acm->readurb);
alloc_fail6:
usb_free_urb(acm->ctrlurb);
alloc_fail5:
usb_buffer_free(usb_dev, acm->writesize, acm->write_buffer, acm->write_dma);
alloc_fail4:
usb_buffer_free(usb_dev, readsize, acm->read_buffer, acm->read_dma);
alloc_fail3:
usb_buffer_free(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
alloc_fail2:
kfree(acm);
alloc_fail:
return -ENOMEM;
}
static void acm_disconnect(struct usb_interface *intf)
{
struct acm *acm = usb_get_intfdata (intf);
struct usb_device *usb_dev = interface_to_usbdev(intf);
if (!acm || !acm->dev) {
dbg("disconnect on nonexisting interface");
return;
}
down(&open_sem);
acm->dev = NULL;
usb_set_intfdata (intf, NULL);
......@@ -693,7 +767,9 @@ static void acm_disconnect(struct usb_interface *intf)
flush_scheduled_work(); /* wait for acm_softint */
kfree(acm->ctrlurb->transfer_buffer);
usb_buffer_free(usb_dev, acm->writesize, acm->write_buffer, acm->write_dma);
usb_buffer_free(usb_dev, acm->readsize, acm->read_buffer, acm->read_dma);
usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
usb_driver_release_interface(&acm_driver, acm->data);
......@@ -704,9 +780,12 @@ static void acm_disconnect(struct usb_interface *intf)
usb_free_urb(acm->readurb);
usb_free_urb(acm->writeurb);
kfree(acm);
up(&open_sem);
return;
}
up(&open_sem);
if (acm->tty)
tty_hangup(acm->tty);
}
......
drivers/usb/class/cdc-acm.h
View file @ 097032ac
......@@ -86,17 +86,23 @@ struct acm {
struct usb_interface *data; /* data interface */
struct tty_struct *tty; /* the corresponding tty */
struct urb *ctrlurb, *readurb, *writeurb; /* urbs */
u8 *ctrl_buffer, *read_buffer, *write_buffer; /* buffers of urbs */
dma_addr_t ctrl_dma, read_dma, write_dma; /* dma handles of buffers */
struct acm_line line; /* line coding (bits, stop, parity) */
struct work_struct work; /* work queue entry for line discipline waking up */
struct tasklet_struct bh; /* rx processing */
spinlock_t throttle_lock; /* synchronize throtteling and read callback */
unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */
unsigned int ctrlout; /* output control lines (DTR, RTS) */
unsigned int writesize; /* max packet size for the output bulk endpoint */
unsigned int readsize,ctrlsize; /* buffer sizes for freeing */
unsigned int used; /* someone has this acm's device open */
unsigned int minor; /* acm minor number */
unsigned char throttle; /* throttled by tty layer */
unsigned char clocal; /* termios CLOCAL */
unsigned char ready_for_write; /* write urb can be used */
unsigned char resubmit_to_unthrottle; /* throtteling has disabled the read urb */
unsigned int ctrl_caps; /* control capabilities from the class specific header */
};
/* "Union Functional Descriptor" from CDC spec 5.2.3.X */
......@@ -110,6 +116,12 @@ struct union_desc {
/* ... and there could be other slave interfaces */
} __attribute__ ((packed));
/* class specific descriptor types */
#define CDC_CALL_MANAGEMENT_TYPE 0x01
#define CDC_AC_MANAGEMENT_TYPE 0x02
#define CDC_UNION_TYPE 0x06
#define CDC_COUNTRY_TYPE 0x07
#define CDC_DATA_INTERFACE_TYPE 0x0a
drivers/usb/core/hub.c
View file @ 097032ac
......@@ -1034,7 +1034,7 @@ static inline void show_string(struct usb_device *udev, char *id, int index)
{}
#endif
/*
/**
* usb_new_device - perform initial device setup (usbcore-internal)
* @udev: newly addressed device (in ADDRESS state)
*
......@@ -1333,13 +1333,14 @@ static int hub_set_address(struct usb_device *udev)
return retval;
}
/* reset device, (re)assign address, get device descriptor.
* device connection is stable, no more debouncing needed.
* returns device in USB_STATE_ADDRESS, except on error.
* on error return, device is no longer usable (ref dropped).
/* Reset device, (re)assign address, get device descriptor.
* Device connection must be stable, no more debouncing needed.
* Returns device in USB_STATE_ADDRESS, except on error.
*
* caller owns dev->serialize for the device, guarding against
* config changes and disconnect processing.
* If this is called for an already-existing device (as part of
* usb_reset_device), the caller must own the device lock. For a
* newly detected device that is not accessible through any global
* pointers, it's not necessary to lock the device.
*/
static int
hub_port_init (struct usb_device *hdev, struct usb_device *udev, int port)
......@@ -1571,6 +1572,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port,
/* Disconnect any existing devices under this port */
if (hdev->children[port])
usb_disconnect(&hdev->children[port]);
clear_bit(port, hub->change_bits);
if (portchange & USB_PORT_STAT_C_CONNECTION) {
status = hub_port_debounce(hdev, port);
......@@ -1785,12 +1787,15 @@ static void hub_events(void)
/* deal with port status changes */
for (i = 0; i < hub->descriptor->bNbrPorts; i++) {
if (!test_and_clear_bit(i+1, hub->event_bits))
connect_change = test_bit(i, hub->change_bits);
if (!test_and_clear_bit(i+1, hub->event_bits) &&
!connect_change)
continue;
ret = hub_port_status(hdev, i, &portstatus, &portchange);
ret = hub_port_status(hdev, i,
&portstatus, &portchange);
if (ret < 0)
continue;
connect_change = 0;
if (portchange & USB_PORT_STAT_C_CONNECTION) {
clear_port_feature(hdev,
......@@ -1819,7 +1824,7 @@ static void hub_events(void)
dev_err (hub_dev,
"port %i "
"disabled by hub (EMI?), "
"re-enabling...",
"re-enabling...\n",
i + 1);
connect_change = 1;
}
......@@ -1996,23 +2001,34 @@ static int config_descriptors_changed(struct usb_device *udev)
!= 0) {
dev_dbg(&udev->dev, "config index %d changed (#%d)\n",
index, buf->bConfigurationValue);
/* FIXME enable this when we can re-enumerate after reset;
* until then DFU-ish drivers need this and other workarounds
*/
// break;
break;
}
}
kfree(buf);
return index != udev->descriptor.bNumConfigurations;
}
/*
/**
* usb_reset_devce - perform a USB port reset to reinitialize a device
* @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
*
* WARNING - don't reset any device unless drivers for all of its
* interfaces are expecting that reset! Maybe some driver->reset()
* method should eventually help ensure sufficient cooperation.
*
* This is the same as usb_reset_device() except that the caller
* already holds dev->serialize. For example, it's safe to use
* Do a port reset, reassign the device's address, and establish its
* former operating configuration. If the reset fails, or the device's
* descriptors change from their values before the reset, or the original
* configuration and altsettings cannot be restored, a flag will be set
* telling khubd to pretend the device has been disconnected and then
* re-connected. All drivers will be unbound, and the device will be
* re-enumerated and probed all over again.
*
* Returns 0 if the reset succeeded, -ENODEV if the device has been
* flagged for logical disconnection, or some other negative error code
* if the reset wasn't even attempted.
*
* The caller must own the device lock. For example, it's safe to use
* this from a driver probe() routine after downloading new firmware.
*/
int __usb_reset_device(struct usb_device *udev)
......@@ -2020,13 +2036,23 @@ int __usb_reset_device(struct usb_device *udev)
struct usb_device *parent = udev->parent;
struct usb_device_descriptor descriptor = udev->descriptor;
int i, ret, port = -1;
struct usb_hub *hub;
if (udev->state == USB_STATE_NOTATTACHED ||
udev->state == USB_STATE_SUSPENDED) {
dev_dbg(&udev->dev, "device reset not allowed in state %d\n",
udev->state);
return -EINVAL;
}
/* FIXME: This should be legal for regular hubs. Root hubs may
* have special requirements. */
if (udev->maxchild) {
/* this requires hub- or hcd-specific logic;
* see hub_reset() and OHCI hc_restart()
*/
dev_dbg(&udev->dev, "%s for hub!\n", __FUNCTION__);
return -EINVAL;
return -EISDIR;
}
for (i = 0; i < parent->maxchild; i++)
......@@ -2035,8 +2061,11 @@ int __usb_reset_device(struct usb_device *udev)
break;
}
if (port < 0)
if (port < 0) {
/* If this ever happens, it's very bad */
dev_err(&udev->dev, "Can't locate device's port!\n");
return -ENOENT;
}
ret = hub_port_init(parent, udev, port);
if (ret < 0)
......@@ -2088,8 +2117,18 @@ int __usb_reset_device(struct usb_device *udev)
return 0;
re_enumerate:
/* FIXME make some task re-enumerate; don't just mark unusable */
hub_port_disable(parent, port);
hub = usb_get_intfdata(parent->actconfig->interface[0]);
set_bit(port, hub->change_bits);
spin_lock_irq(&hub_event_lock);
if (list_empty(&hub->event_list)) {
list_add_tail(&hub->event_list, &hub_event_list);
wake_up(&khubd_wait);
}
spin_unlock_irq(&hub_event_lock);
return -ENODEV;
}
EXPORT_SYMBOL(__usb_reset_device);
......
drivers/usb/core/hub.h
View file @ 097032ac
......@@ -204,6 +204,8 @@ struct usb_hub {
struct list_head event_list; /* hubs w/data or errs ready */
unsigned long event_bits[1]; /* status change bitmask */
unsigned long change_bits[1]; /* ports with logical connect
status change */
#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
#error event_bits[] is too short!
#endif
......
drivers/usb/gadget/dummy_hcd.c
View file @ 097032ac
......@@ -146,8 +146,6 @@ struct dummy {
u8 fifo_buf [FIFO_SIZE];
u16 devstatus;
struct hcd_dev *hdev;
/*
* MASTER/HOST side support
*/
......@@ -159,6 +157,8 @@ struct dummy {
struct completion released;
unsigned resuming:1;
unsigned long re_timeout;
struct usb_device *udev;
};
static struct dummy *the_controller;
......@@ -739,11 +739,9 @@ stop_activity (struct dummy *dum, struct usb_gadget_driver *driver)
struct dummy_ep *ep;
/* prevent any more requests */
dum->hdev = 0;
dum->address = 0;
/* this might not succeed ... */
del_timer (&dum->timer);
/* The timer is left running so that outstanding URBs can fail */
/* nuke any pending requests first, so driver i/o is quiesced */
list_for_each_entry (ep, &dum->gadget.ep_list, ep.ep_list)
......@@ -784,7 +782,6 @@ usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
driver_unregister (&driver->driver);
del_timer_sync (&dum->timer);
return 0;
}
EXPORT_SYMBOL (usb_gadget_unregister_driver);
......@@ -825,7 +822,12 @@ static int dummy_urb_enqueue (
dum = container_of (hcd, struct dummy, hcd);
spin_lock_irqsave (&dum->lock, flags);
dum->hdev = urb->dev->hcpriv;
if (!dum->udev) {
dum->udev = urb->dev;
usb_get_dev (dum->udev);
} else if (unlikely (dum->udev != urb->dev))
dev_err (hardware, "usb_device address has changed!\n");
urb->hcpriv = dum;
if (usb_pipetype (urb->pipe) == PIPE_CONTROL)
urb->error_count = 1; /* mark as a new urb */
......@@ -1032,17 +1034,12 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
static void dummy_timer (unsigned long _dum)
{
struct dummy *dum = (struct dummy *) _dum;
struct hcd_dev *hdev = dum->hdev;
struct hcd_dev *hdev;
struct list_head *entry, *tmp;
unsigned long flags;
int limit, total;
int i;
if (!hdev) {
dev_err (hardware, "timer fired with device gone?\n");
return;
}
/* simplistic model for one frame's bandwidth */
switch (dum->gadget.speed) {
case USB_SPEED_LOW:
......@@ -1063,6 +1060,14 @@ static void dummy_timer (unsigned long _dum)
/* look at each urb queued by the host side driver */
spin_lock_irqsave (&dum->lock, flags);
if (!dum->udev) {
dev_err (hardware, "timer fired with no URBs pending?\n");
spin_unlock_irqrestore (&dum->lock, flags);
return;
}
hdev = dum->udev->hcpriv;
for (i = 0; i < DUMMY_ENDPOINTS; i++) {
if (!ep_name [i])
break;
......@@ -1334,7 +1339,11 @@ static void dummy_timer (unsigned long _dum)
/* want a 1 msec delay here */
if (!list_empty (&hdev->urb_list))
mod_timer (&dum->timer, jiffies + 1);
mod_timer (&dum->timer, jiffies + msecs_to_jiffies(1));
else {
usb_put_dev (dum->udev);
dum->udev = NULL;
}
spin_unlock_irqrestore (&dum->lock, flags);
}
......@@ -1571,10 +1580,12 @@ show_urbs (struct device *dev, char *buf)
struct urb *urb;
size_t size = 0;
unsigned long flags;
struct hcd_dev *hdev;
spin_lock_irqsave (&dum->lock, flags);
if (dum->hdev) {
list_for_each_entry (urb, &dum->hdev->urb_list, urb_list) {
if (dum->udev) {
hdev = dum->udev->hcpriv;
list_for_each_entry (urb, &hdev->urb_list, urb_list) {
size_t temp;
temp = show_urb (buf, PAGE_SIZE - size, urb);
......
drivers/usb/gadget/ether.c
View file @ 097032ac
......@@ -234,7 +234,7 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
/* For CDC-incapable hardware, choose the simple cdc subset.
* Anything that talks bulk (without notable bugs) can do this.
*/
#ifdef CONFIG_USB_GADGET_PXA
#ifdef CONFIG_USB_GADGET_PXA2XX
#define DEV_CONFIG_SUBSET
#endif
......@@ -1597,6 +1597,8 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
/* respond with data transfer before status phase? */
if (value >= 0) {
req->length = value;
req->zero = value < ctrl->wLength
&& (value % gadget->ep0->maxpacket) == 0;
value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
if (value < 0) {
DEBUG (dev, "ep_queue --> %d\n", value);
......@@ -2373,6 +2375,7 @@ eth_bind (struct usb_gadget *gadget)
EP_OUT_NAME = ep->name;
ep->driver_data = ep; /* claim */
#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
/* CDC Ethernet control interface doesn't require a status endpoint.
* Since some hosts expect one, try to allocate one anyway.
*/
......@@ -2386,13 +2389,12 @@ eth_bind (struct usb_gadget *gadget)
"can't run RNDIS on %s\n",
gadget->name);
return -ENODEV;
#ifdef DEV_CONFIG_CDC
} else if (cdc) {
control_intf.bNumEndpoints = 0;
/* FIXME remove endpoint from descriptor list */
#endif
}
}
#endif
/* one config: cdc, else minimal subset */
if (!cdc) {
......@@ -2446,7 +2448,7 @@ eth_bind (struct usb_gadget *gadget)
/* Module params for these addresses should come from ID proms.
* The host side address is used with CDC and RNDIS, and commonly
* end ups in a persistent config database.
* ends up in a persistent config database.
*/
get_ether_addr(dev_addr, net->dev_addr);
if (cdc || rndis) {
......
drivers/usb/gadget/file_storage.c
View file @ 097032ac
......@@ -1465,6 +1465,8 @@ static int fsg_setup(struct usb_gadget *gadget,
/* Respond with data/status or defer until later? */
if (rc >= 0 && rc != DELAYED_STATUS) {
fsg->ep0req->length = rc;
fsg->ep0req->zero = rc < ctrl->wLength
&& (rc % gadget->ep0->maxpacket) == 0;
fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ?
"ep0-in" : "ep0-out");
rc = ep0_queue(fsg);
......
drivers/usb/gadget/inode.c
View file @ 097032ac
......@@ -20,7 +20,7 @@
*/
#define DEBUG 1 /* data to help fault diagnosis */
// #define DEBUG /* data to help fault diagnosis */
// #define VERBOSE /* extra debug messages (success too) */
#include <linux/init.h>
......@@ -44,7 +44,8 @@
* The gadgetfs API maps each endpoint to a file descriptor so that you
* can use standard synchronous read/write calls for I/O. There's some
* O_NONBLOCK and O_ASYNC/FASYNC style i/o support. Example usermode
* drivers show how this works in practice.
* drivers show how this works in practice. You can also use AIO to
* eliminate I/O gaps between requests, to help when streaming data.
*
* Key parts that must be USB-specific are protocols defining how the
* read/write operations relate to the hardware state machines. There
......@@ -70,7 +71,7 @@
*/
#define DRIVER_DESC "USB Gadget filesystem"
#define DRIVER_VERSION "20 Aug 2003"
#define DRIVER_VERSION "18 Nov 2003"
static const char driver_desc [] = DRIVER_DESC;
static const char shortname [] = "gadgetfs";
......@@ -539,6 +540,177 @@ static int ep_ioctl (struct inode *inode, struct file *fd,
return status;
}
/*----------------------------------------------------------------------*/
/* ASYNCHRONOUS ENDPOINT I/O OPERATIONS (bulk/intr/iso) */
struct kiocb_priv {
struct usb_request *req;
struct ep_data *epdata;
void *buf;
char __user *ubuf;
unsigned actual;
};
static int ep_aio_cancel(struct kiocb *iocb, struct io_event *e)
{
struct kiocb_priv *priv = (void *) &iocb->private;
struct ep_data *epdata;
int value;
local_irq_disable();
epdata = priv->epdata;
// spin_lock(&epdata->dev->lock);
kiocbSetCancelled(iocb);
if (likely(epdata && epdata->ep && priv->req))
value = usb_ep_dequeue (epdata->ep, priv->req);
else
value = -EINVAL;
// spin_unlock(&epdata->dev->lock);
local_irq_enable();
aio_put_req(iocb);
return value;
}
static long ep_aio_read_retry(struct kiocb *iocb)
{
struct kiocb_priv *priv = (void *) &iocb->private;
int status = priv->actual;
/* we "retry" to get the right mm context for this: */
status = copy_to_user(priv->ubuf, priv->buf, priv->actual);
if (unlikely(0 != status))
status = -EFAULT;
else
status = priv->actual;
kfree(priv->buf);
aio_put_req(iocb);
return status;
}
static void ep_aio_complete(struct usb_ep *ep, struct usb_request *req)
{
struct kiocb *iocb = req->context;
struct kiocb_priv *priv = (void *) &iocb->private;
struct ep_data *epdata = priv->epdata;
/* lock against disconnect (and ideally, cancel) */
spin_lock(&epdata->dev->lock);
priv->req = 0;
priv->epdata = 0;
if (NULL == iocb->ki_retry
|| unlikely(0 == req->actual)
|| unlikely(kiocbIsCancelled(iocb))) {
kfree(req->buf);
/* aio_complete() reports bytes-transferred _and_ faults */
if (unlikely(kiocbIsCancelled(iocb)))
aio_put_req(iocb);
else
aio_complete(iocb,
req->actual ? req->actual : req->status,
req->status);
} else {
/* retry() won't report both; so we hide some faults */
if (unlikely(0 != req->status))
DBG(epdata->dev, "%s fault %d len %d\n",
ep->name, req->status, req->actual);
priv->buf = req->buf;
priv->actual = req->actual;
kick_iocb(iocb);
}
spin_unlock(&epdata->dev->lock);
usb_ep_free_request(ep, req);
put_ep(epdata);
}
static ssize_t
ep_aio_rwtail(struct kiocb *iocb, char *buf, size_t len, struct ep_data *epdata)
{
struct kiocb_priv *priv = (void *) &iocb->private;
struct usb_request *req;
ssize_t value;
value = get_ready_ep(iocb->ki_filp->f_flags, epdata);
if (unlikely(value < 0)) {
kfree(buf);
return value;
}
iocb->ki_cancel = ep_aio_cancel;
get_ep(epdata);
priv->epdata = epdata;
priv->actual = 0;
/* each kiocb is coupled to one usb_request, but we can't
* allocate or submit those if the host disconnected.
*/
spin_lock_irq(&epdata->dev->lock);
if (likely(epdata->ep)) {
req = usb_ep_alloc_request(epdata->ep, GFP_ATOMIC);
if (likely(req)) {
priv->req = req;
req->buf = buf;
req->length = len;
req->complete = ep_aio_complete;
req->context = iocb;
value = usb_ep_queue(epdata->ep, req, GFP_ATOMIC);
if (unlikely(0 != value))
usb_ep_free_request(epdata->ep, req);
} else
value = -EAGAIN;
} else
value = -ENODEV;
spin_unlock_irq(&epdata->dev->lock);
up(&epdata->lock);
if (unlikely(value))
put_ep(epdata);
else
value = -EIOCBQUEUED;
return value;
}
static ssize_t
ep_aio_read(struct kiocb *iocb, char __user *ubuf, size_t len, loff_t o)
{
struct kiocb_priv *priv = (void *) &iocb->private;
struct ep_data *epdata = iocb->ki_filp->private_data;
char *buf;
if (unlikely(epdata->desc.bEndpointAddress & USB_DIR_IN))
return -EINVAL;
buf = kmalloc(len, GFP_KERNEL);
if (unlikely(!buf))
return -ENOMEM;
iocb->ki_retry = ep_aio_read_retry;
priv->ubuf = ubuf;
return ep_aio_rwtail(iocb, buf, len, epdata);
}
static ssize_t
ep_aio_write(struct kiocb *iocb, const char __user *ubuf, size_t len, loff_t o)
{
struct ep_data *epdata = iocb->ki_filp->private_data;
char *buf;
if (unlikely(!(epdata->desc.bEndpointAddress & USB_DIR_IN)))
return -EINVAL;
buf = kmalloc(len, GFP_KERNEL);
if (unlikely(!buf))
return -ENOMEM;
if (unlikely(copy_from_user(buf, ubuf, len) != 0)) {
kfree(buf);
return -EFAULT;
}
return ep_aio_rwtail(iocb, buf, len, epdata);
}
/*----------------------------------------------------------------------*/
/* used after endpoint configuration */
static struct file_operations ep_io_operations = {
.owner = THIS_MODULE,
......@@ -547,8 +719,8 @@ static struct file_operations ep_io_operations = {
.ioctl = ep_ioctl,
.release = ep_release,
// .aio_read = ep_aio_read,
// .aio_write = ep_aio_write,
.aio_read = ep_aio_read,
.aio_write = ep_aio_write,
};
/* ENDPOINT INITIALIZATION
......@@ -1320,6 +1492,8 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
/* proceed with data transfer and status phases? */
if (value >= 0 && dev->state != STATE_SETUP) {
req->length = value;
req->zero = value < ctrl->wLength
&& (value % gadget->ep0->maxpacket) == 0;
value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
if (value < 0) {
DBG (dev, "ep_queue --> %d\n", value);
......
drivers/usb/gadget/serial.c
View file @ 097032ac
......@@ -1573,6 +1573,8 @@ static int gs_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctr
/* respond with data transfer before status phase? */
if (ret >= 0) {
req->length = ret;
req->zero = ret < ctrl->wLength
&& (ret % gadget->ep0->maxpacket) == 0;
ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
if (ret < 0) {
printk(KERN_ERR
......
drivers/usb/gadget/zero.c
View file @ 097032ac
......@@ -1037,6 +1037,8 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
/* respond with data transfer before status phase? */
if (value >= 0) {
req->length = value;
req->zero = value < ctrl->wLength
&& (value % gadget->ep0->maxpacket) == 0;
value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
if (value < 0) {
DBG (dev, "ep_queue --> %d\n", value);
......
drivers/usb/host/ehci-hcd.c
View file @ 097032ac
......@@ -425,7 +425,6 @@ static int ehci_start (struct usb_hcd *hcd)
ehci_mem_cleanup (ehci);
return retval;
}
writel (INTR_MASK, &ehci->regs->intr_enable);
writel (ehci->periodic_dma, &ehci->regs->frame_list);
#ifdef CONFIG_PCI
......@@ -531,7 +530,8 @@ static int ehci_start (struct usb_hcd *hcd)
/*
* Start, enabling full USB 2.0 functionality ... usb 1.1 devices
* are explicitly handed to companion controller(s), so no TT is
* involved with the root hub.
* involved with the root hub. (Except where one is integrated,
* and there's no companion controller unless maybe for USB OTG.)
*/
ehci->reboot_notifier.notifier_call = ehci_reboot;
register_reboot_notifier (&ehci->reboot_notifier);
......@@ -563,6 +563,8 @@ static int ehci_start (struct usb_hcd *hcd)
goto done2;
}
writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */
create_debug_files (ehci);
return 0;
......@@ -573,6 +575,7 @@ static int ehci_start (struct usb_hcd *hcd)
static void ehci_stop (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u8 rh_ports, port;
ehci_dbg (ehci, "stop\n");
......@@ -584,7 +587,16 @@ static void ehci_stop (struct usb_hcd *hcd)
return;
}
del_timer_sync (&ehci->watchdog);
/* Turn off port power on all root hub ports. */
rh_ports = HCS_N_PORTS (ehci->hcs_params);
for (port = 1; port <= rh_ports; port++) {
ehci_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER,
port, NULL, 0);
}
ehci_reset (ehci);
writel (0, &ehci->regs->intr_enable);
/* let companion controllers work when we aren't */
writel (0, &ehci->regs->configured_flag);
......@@ -704,12 +716,6 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
status = readl (&ehci->regs->status);
/* shared irq */
if (status == 0) {
spin_unlock (&ehci->lock);
return IRQ_NONE;
}
/* e.g. cardbus physical eject */
if (status == ~(u32) 0) {
ehci_dbg (ehci, "device removed\n");
......@@ -717,8 +723,10 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
}
status &= INTR_MASK;
if (!status) /* irq sharing? */
goto done;
if (!status) { /* irq sharing? */
spin_unlock(&ehci->lock);
return IRQ_NONE;
}
/* clear (just) interrupts */
writel (status, &ehci->regs->status);
......@@ -789,7 +797,6 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
if (bh)
ehci_work (ehci, regs);
done:
spin_unlock (&ehci->lock);
return IRQ_HANDLED;
}
......
drivers/usb/host/uhci-debug.c
View file @ 097032ac
......@@ -248,7 +248,7 @@ static int uhci_show_sc(int port, unsigned short status, char *buf, int len)
static int uhci_show_status(struct uhci_hcd *uhci, char *buf, int len)
{
char *out = buf;
unsigned int io_addr = uhci->io_addr;
unsigned long io_addr = uhci->io_addr;
unsigned short usbcmd, usbstat, usbint, usbfrnum;
unsigned int flbaseadd;
unsigned char sof;
......
drivers/usb/host/uhci-hcd.c
View file @ 097032ac
......@@ -1762,7 +1762,7 @@ static void uhci_remove_pending_urbps(struct uhci_hcd *uhci)
static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
unsigned int io_addr = uhci->io_addr;
unsigned long io_addr = uhci->io_addr;
unsigned short status;
struct list_head *tmp, *head;
unsigned int age;
......@@ -1835,7 +1835,7 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
static void reset_hc(struct uhci_hcd *uhci)
{
unsigned int io_addr = uhci->io_addr;
unsigned long io_addr = uhci->io_addr;
/* Turn off PIRQ, SMI, and all interrupts. This also turns off
* the BIOS's USB Legacy Support.
......@@ -1856,7 +1856,7 @@ static void reset_hc(struct uhci_hcd *uhci)
static void suspend_hc(struct uhci_hcd *uhci)
{
unsigned int io_addr = uhci->io_addr;
unsigned long io_addr = uhci->io_addr;
dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
uhci->state = UHCI_SUSPENDED;
......@@ -1866,7 +1866,7 @@ static void suspend_hc(struct uhci_hcd *uhci)
static void wakeup_hc(struct uhci_hcd *uhci)
{
unsigned int io_addr = uhci->io_addr;
unsigned long io_addr = uhci->io_addr;
switch (uhci->state) {
case UHCI_SUSPENDED: /* Start the resume */
......@@ -1906,7 +1906,7 @@ static void wakeup_hc(struct uhci_hcd *uhci)
static int ports_active(struct uhci_hcd *uhci)
{
unsigned int io_addr = uhci->io_addr;
unsigned long io_addr = uhci->io_addr;
int connection = 0;
int i;
......@@ -1918,7 +1918,7 @@ static int ports_active(struct uhci_hcd *uhci)
static int suspend_allowed(struct uhci_hcd *uhci)
{
unsigned int io_addr = uhci->io_addr;
unsigned long io_addr = uhci->io_addr;
int i;
if (to_pci_dev(uhci_dev(uhci))->vendor != PCI_VENDOR_ID_INTEL)
......@@ -1983,7 +1983,7 @@ static void hc_state_transitions(struct uhci_hcd *uhci)
static void start_hc(struct uhci_hcd *uhci)
{
unsigned int io_addr = uhci->io_addr;
unsigned long io_addr = uhci->io_addr;
int timeout = 1000;
/*
......@@ -2261,6 +2261,11 @@ static int uhci_start(struct usb_hcd *hcd)
uhci->fl->frame[i] = cpu_to_le32(uhci->skelqh[irq]->dma_handle);
}
/*
* Some architectures require a full mb() to enforce completion of
* the memory writes above before the I/O transfers in start_hc().
*/
mb();
start_hc(uhci);
init_stall_timer(hcd);
......
drivers/usb/host/uhci-hub.c
View file @ 097032ac
......@@ -36,7 +36,7 @@ static __u8 root_hub_hub_des[] =
static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
unsigned int io_addr = uhci->io_addr;
unsigned long io_addr = uhci->io_addr;
int i;
*buf = 0;
......@@ -69,7 +69,7 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int status, retval = 0, len = 0;
unsigned int port_addr = uhci->io_addr + USBPORTSC1 + 2 * (wIndex-1);
unsigned long port_addr = uhci->io_addr + USBPORTSC1 + 2 * (wIndex-1);
__u16 wPortChange, wPortStatus;
switch (typeReq) {
......
drivers/usb/input/hid-tmff.c
View file @ 097032ac
......@@ -110,7 +110,7 @@ int hid_tmff_init(struct hid_device *hid)
{
struct tmff_device *private;
struct list_head *pos;
struct hid_input *hidinput = list_entry(&hid->inputs, struct hid_input, list);
struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
private = kmalloc(sizeof(struct tmff_device), GFP_KERNEL);
if (!private)
......
drivers/usb/media/Kconfig
View file @ 097032ac
......@@ -108,7 +108,7 @@ config USB_OV511
config USB_PWC
tristate "USB Philips Cameras"
depends on USB && VIDEO_DEV && CONFIG_BROKEN
depends on USB && VIDEO_DEV
---help---
Say Y or M here if you want to use one of these Philips & OEM
webcams:
......
drivers/usb/media/konicawc.c
View file @ 097032ac
......@@ -324,7 +324,7 @@ static void resubmit_urb(struct uvd *uvd, struct urb *urb)
}
urb->dev = uvd->dev;
urb->status = 0;
ret = usb_submit_urb(urb, GFP_KERNEL);
ret = usb_submit_urb(urb, GFP_ATOMIC);
DEBUG(3, "submitting urb of length %d", urb->transfer_buffer_length);
if(ret)
err("usb_submit_urb error (%d)", ret);
......
drivers/usb/media/pwc-ctrl.c
View file @ 097032ac
......@@ -30,6 +30,7 @@
#include <asm/uaccess.h>
#endif
#include <asm/errno.h>
#include <linux/version.h>
#include "pwc.h"
#include "pwc-ioctl.h"
......@@ -267,8 +268,11 @@ static inline int set_video_mode_Nala(struct pwc_device *pdev, int size, int fra
Debug("Failed to send video command... %d\n", ret);
return ret;
}
if (pEntry->compressed && pdev->decompressor != NULL)
pdev->decompressor->init(pdev->release, buf, pdev->decompress_data);
if (pEntry->compressed && pdev->decompressor != 0 && pdev->vpalette != VIDEO_PALETTE_RAW)
pdev->decompressor->init(pdev->type, pdev->release, buf, pdev->decompress_data);
pdev->cmd_len = 3;
memcpy(pdev->cmd_buf, buf, 3);
/* Set various parameters */
pdev->vframes = frames;
......@@ -332,8 +336,11 @@ static inline int set_video_mode_Timon(struct pwc_device *pdev, int size, int fr
if (ret < 0)
return ret;
if (pChoose->bandlength > 0)
pdev->decompressor->init(pdev->release, buf, pdev->decompress_data);
if (pChoose->bandlength > 0 && pdev->decompressor != 0 && pdev->vpalette != VIDEO_PALETTE_RAW)
pdev->decompressor->init(pdev->type, pdev->release, buf, pdev->decompress_data);
pdev->cmd_len = 13;
memcpy(pdev->cmd_buf, buf, 13);
/* Set various parameters */
pdev->vframes = frames;
......@@ -352,9 +359,10 @@ static inline int set_video_mode_Timon(struct pwc_device *pdev, int size, int fr
static inline int set_video_mode_Kiara(struct pwc_device *pdev, int size, int frames, int compression, int snapshot)
{
struct Kiara_table_entry *pChoose;
struct Kiara_table_entry *pChoose = 0;
int fps, ret;
unsigned char buf[12];
struct Kiara_table_entry RawEntry = {6, 773, 1272, {0xAD, 0xF4, 0x10, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x03, 0x80}};
if (size >= PSZ_MAX || frames < 5 || frames > 30 || compression < 0 || compression > 3)
return -EINVAL;
......@@ -362,11 +370,30 @@ static inline int set_video_mode_Kiara(struct pwc_device *pdev, int size, int fr
return -EINVAL;
fps = (frames / 5) - 1;
/* special case: VGA @ 5 fps and snapshot is raw bayer mode */
if (size == PSZ_VGA && frames == 5 && snapshot)
{
/* Only available in case the raw palette is selected or
we have the decompressor available. This mode is
only available in compressed form
*/
if (pdev->vpalette == VIDEO_PALETTE_RAW || pdev->decompressor != NULL)
{
Info("Choosing VGA/5 BAYER mode (%d).\n", pdev->vpalette);
pChoose = &RawEntry;
}
else
{
Info("VGA/5 BAYER mode _must_ have a decompressor available, or use RAW palette.\n");
}
}
else
{
/* Find a supported framerate with progressively higher compression ratios
if the preferred ratio is not available.
Skip this step when using RAW modes.
*/
pChoose = NULL;
if (pdev->decompressor == NULL) {
if (pdev->decompressor == NULL && pdev->vpalette != VIDEO_PALETTE_RAW) {
#if PWC_DEBUG
Debug("Trying to find uncompressed mode.\n");
#endif
......@@ -380,6 +407,7 @@ static inline int set_video_mode_Kiara(struct pwc_device *pdev, int size, int fr
compression++;
}
}
}
if (pChoose == NULL || pChoose->alternate == 0)
return -ENOENT; /* Not supported. */
......@@ -393,9 +421,11 @@ static inline int set_video_mode_Kiara(struct pwc_device *pdev, int size, int fr
if (ret < 0)
return ret;
if (pChoose->bandlength > 0)
pdev->decompressor->init(pdev->release, buf, pdev->decompress_data);
if (pChoose->bandlength > 0 && pdev->decompressor != 0 && pdev->vpalette != VIDEO_PALETTE_RAW)
pdev->decompressor->init(pdev->type, pdev->release, buf, pdev->decompress_data);
pdev->cmd_len = 12;
memcpy(pdev->cmd_buf, buf, 12);
/* All set and go */
pdev->vframes = frames;
pdev->vsize = size;
......@@ -403,15 +433,15 @@ static inline int set_video_mode_Kiara(struct pwc_device *pdev, int size, int fr
pdev->valternate = pChoose->alternate;
pdev->image = pwc_image_sizes[size];
pdev->vbandlength = pChoose->bandlength;
if (pChoose->bandlength > 0)
pdev->frame_size = (pChoose->bandlength * pdev->image.y) / 4;
if (pdev->vbandlength > 0)
pdev->frame_size = (pdev->vbandlength * pdev->image.y) / 4;
else
pdev->frame_size = (pdev->image.x * pdev->image.y * 12) / 8;
pdev->frame_size += (pdev->frame_header_size + pdev->frame_trailer_size);
return 0;
}
/**
@pdev: device structure
@width: viewport width
......@@ -424,11 +454,14 @@ int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frame
{
int ret, size;
Trace(TRACE_FLOW, "set_video_mode(%dx%d @ %d, palette %d).\n", width, height, frames, pdev->vpalette);
size = pwc_decode_size(pdev, width, height);
if (size < 0) {
Debug("Could not find suitable size.\n");
return -ERANGE;
}
Debug("decode_size = %d.\n", size);
ret = -EINVAL;
switch(pdev->type) {
case 645:
......@@ -459,6 +492,7 @@ int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frame
}
pdev->view.x = width;
pdev->view.y = height;
pdev->frame_total_size = pdev->frame_size + pdev->frame_header_size + pdev->frame_trailer_size;
pwc_set_image_buffer_size(pdev);
Trace(TRACE_SIZE, "Set viewport to %dx%d, image size is %dx%d.\n", width, height, pwc_image_sizes[size].x, pwc_image_sizes[size].y);
return 0;
......@@ -467,10 +501,20 @@ int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frame
void pwc_set_image_buffer_size(struct pwc_device *pdev)
{
int factor, i, filler = 0;
int i, factor = 0, filler = 0;
/* for PALETTE_YUV420P */
switch(pdev->vpalette)
{
case VIDEO_PALETTE_YUV420P:
factor = 6;
filler = 128;
break;
case VIDEO_PALETTE_RAW:
factor = 6; /* can be uncompressed YUV420P */
filler = 0;
break;
}
/* Set sizes in bytes */
pdev->image.size = pdev->image.x * pdev->image.y * factor / 4;
......@@ -500,12 +544,7 @@ int pwc_get_brightness(struct pwc_device *pdev)
char buf;
int ret;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_LUM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
BRIGHTNESS_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
if (ret < 0)
return ret;
return buf << 9;
......@@ -520,12 +559,7 @@ int pwc_set_brightness(struct pwc_device *pdev, int value)
if (value > 0xffff)
value = 0xffff;
buf = (value >> 9) & 0x7f;
return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_LUM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
BRIGHTNESS_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
return SendControlMsg(SET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
}
/* CONTRAST */
......@@ -535,12 +569,7 @@ int pwc_get_contrast(struct pwc_device *pdev)
char buf;
int ret;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_LUM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
CONTRAST_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_LUM_CTL, CONTRAST_FORMATTER, 1);
if (ret < 0)
return ret;
return buf << 10;
......@@ -555,12 +584,7 @@ int pwc_set_contrast(struct pwc_device *pdev, int value)
if (value > 0xffff)
value = 0xffff;
buf = (value >> 10) & 0x3f;
return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_LUM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
CONTRAST_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
return SendControlMsg(SET_LUM_CTL, CONTRAST_FORMATTER, 1);
}
/* GAMMA */
......@@ -570,12 +594,7 @@ int pwc_get_gamma(struct pwc_device *pdev)
char buf;
int ret;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_LUM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
GAMMA_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1);
if (ret < 0)
return ret;
return buf << 11;
......@@ -590,12 +609,7 @@ int pwc_set_gamma(struct pwc_device *pdev, int value)
if (value > 0xffff)
value = 0xffff;
buf = (value >> 11) & 0x1f;
return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_LUM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
GAMMA_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
return SendControlMsg(SET_LUM_CTL, GAMMA_FORMATTER, 1);
}
......@@ -608,12 +622,7 @@ int pwc_get_saturation(struct pwc_device *pdev)
if (pdev->type < 675)
return -1;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_CHROM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
pdev->type < 730 ? SATURATION_MODE_FORMATTER2 : SATURATION_MODE_FORMATTER1,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_CHROM_CTL, pdev->type < 730 ? SATURATION_MODE_FORMATTER2 : SATURATION_MODE_FORMATTER1, 1);
if (ret < 0)
return ret;
return 32768 + buf * 327;
......@@ -631,12 +640,7 @@ int pwc_set_saturation(struct pwc_device *pdev, int value)
value = 0xffff;
/* saturation ranges from -100 to +100 */
buf = (value - 32768) / 327;
return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_CHROM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
pdev->type < 730 ? SATURATION_MODE_FORMATTER2 : SATURATION_MODE_FORMATTER1,
pdev->vcinterface,
&buf, 1, HZ / 2);
return SendControlMsg(SET_CHROM_CTL, pdev->type < 730 ? SATURATION_MODE_FORMATTER2 : SATURATION_MODE_FORMATTER1, 1);
}
/* AGC */
......@@ -651,12 +655,7 @@ static inline int pwc_set_agc(struct pwc_device *pdev, int mode, int value)
else
buf = 0xff; /* fixed */
ret = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_LUM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
AGC_MODE_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1);
if (!mode && ret >= 0) {
if (value < 0)
......@@ -664,12 +663,7 @@ static inline int pwc_set_agc(struct pwc_device *pdev, int mode, int value)
if (value > 0xffff)
value = 0xffff;
buf = (value >> 10) & 0x3F;
ret = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_LUM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
PRESET_AGC_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = SendControlMsg(SET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
}
if (ret < 0)
return ret;
......@@ -681,22 +675,12 @@ static inline int pwc_get_agc(struct pwc_device *pdev, int *value)
unsigned char buf;
int ret;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_LUM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
AGC_MODE_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1);
if (ret < 0)
return ret;
if (buf != 0) { /* fixed */
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_LUM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
PRESET_AGC_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
if (ret < 0)
return ret;
if (buf > 0x3F)
......@@ -704,12 +688,7 @@ static inline int pwc_get_agc(struct pwc_device *pdev, int *value)
*value = (buf << 10);
}
else { /* auto */
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_STATUS_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
READ_AGC_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1);
if (ret < 0)
return ret;
/* Gah... this value ranges from 0x00 ... 0x9F */
......@@ -732,12 +711,7 @@ static inline int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int v
else
buf[0] = 0xff; /* fixed */
ret = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_LUM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
SHUTTER_MODE_FORMATTER,
pdev->vcinterface,
buf, 1, HZ / 2);
ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1);
if (!mode && ret >= 0) {
if (value < 0)
......@@ -763,12 +737,7 @@ static inline int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int v
break;
}
ret = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_LUM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
PRESET_SHUTTER_FORMATTER,
pdev->vcinterface,
&buf, 2, HZ / 2);
ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2);
}
return ret;
}
......@@ -787,12 +756,7 @@ int pwc_camera_power(struct pwc_device *pdev, int power)
buf = 0x00; /* active */
else
buf = 0xFF; /* power save */
return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_STATUS_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
SET_POWER_SAVE_MODE_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
return SendControlMsg(SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, 1);
}
......@@ -801,32 +765,20 @@ int pwc_camera_power(struct pwc_device *pdev, int power)
static inline int pwc_restore_user(struct pwc_device *pdev)
{
return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_STATUS_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
RESTORE_USER_DEFAULTS_FORMATTER,
pdev->vcinterface,
NULL, 0, HZ / 2);
char buf; /* dummy */
return SendControlMsg(SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, 0);
}
static inline int pwc_save_user(struct pwc_device *pdev)
{
return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_STATUS_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
SAVE_USER_DEFAULTS_FORMATTER,
pdev->vcinterface,
NULL, 0, HZ / 2);
char buf; /* dummy */
return SendControlMsg(SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, 0);
}
static inline int pwc_restore_factory(struct pwc_device *pdev)
{
return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_STATUS_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
RESTORE_FACTORY_DEFAULTS_FORMATTER,
pdev->vcinterface,
NULL, 0, HZ / 2);
char buf; /* dummy */
return SendControlMsg(SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, 0);
}
/* ************************************************* */
......@@ -854,12 +806,7 @@ static inline int pwc_set_awb(struct pwc_device *pdev, int mode)
buf = mode & 0x07; /* just the lowest three bits */
ret = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_CHROM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
WB_MODE_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1);
if (ret < 0)
return ret;
......@@ -871,12 +818,7 @@ static inline int pwc_get_awb(struct pwc_device *pdev)
unsigned char buf;
int ret;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_CHROM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
WB_MODE_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1);
if (ret < 0)
return ret;
......@@ -891,34 +833,21 @@ static inline int pwc_set_red_gain(struct pwc_device *pdev, int value)
value = 0;
if (value > 0xffff)
value = 0xffff;
/* only the msb are considered */
/* only the msb is considered */
buf = value >> 8;
return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_CHROM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
PRESET_MANUAL_RED_GAIN_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
}
static inline int pwc_get_red_gain(struct pwc_device *pdev)
static inline int pwc_get_red_gain(struct pwc_device *pdev, int *value)
{
unsigned char buf;
int ret;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_CHROM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
PRESET_MANUAL_RED_GAIN_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
if (ret < 0)
return ret;
return (buf << 8);
*value = buf << 8;
return 0;
}
......@@ -930,34 +859,21 @@ static inline int pwc_set_blue_gain(struct pwc_device *pdev, int value)
value = 0;
if (value > 0xffff)
value = 0xffff;
/* linear mapping of 0..0xffff to -0x80..0x7f */
buf = (value >> 8);
return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_CHROM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
PRESET_MANUAL_BLUE_GAIN_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
/* only the msb is considered */
buf = value >> 8;
return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
}
static inline int pwc_get_blue_gain(struct pwc_device *pdev)
static inline int pwc_get_blue_gain(struct pwc_device *pdev, int *value)
{
unsigned char buf;
int ret;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_CHROM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
PRESET_MANUAL_BLUE_GAIN_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
if (ret < 0)
return ret;
return (buf << 8);
*value = buf << 8;
return 0;
}
......@@ -965,40 +881,28 @@ static inline int pwc_get_blue_gain(struct pwc_device *pdev)
internal red/blue gains, which may be different from the manual
gains set or read above.
*/
static inline int pwc_read_red_gain(struct pwc_device *pdev)
static inline int pwc_read_red_gain(struct pwc_device *pdev, int *value)
{
unsigned char buf;
int ret;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_STATUS_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
READ_RED_GAIN_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1);
if (ret < 0)
return ret;
return (buf << 8);
*value = buf << 8;
return 0;
}
static inline int pwc_read_blue_gain(struct pwc_device *pdev)
static inline int pwc_read_blue_gain(struct pwc_device *pdev, int *value)
{
unsigned char buf;
int ret;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_STATUS_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
READ_BLUE_GAIN_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1);
if (ret < 0)
return ret;
return (buf << 8);
*value = buf << 8;
return 0;
}
......@@ -1008,28 +912,19 @@ static inline int pwc_set_wb_speed(struct pwc_device *pdev, int speed)
/* useful range is 0x01..0x20 */
buf = speed / 0x7f0;
return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_CHROM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
AWB_CONTROL_SPEED_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
}
static inline int pwc_get_wb_speed(struct pwc_device *pdev)
static inline int pwc_get_wb_speed(struct pwc_device *pdev, int *value)
{
unsigned char buf;
int ret;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_CHROM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
AWB_CONTROL_SPEED_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
if (ret < 0)
return ret;
return (buf * 0x7f0);
*value = buf * 0x7f0;
return 0;
}
......@@ -1039,28 +934,19 @@ static inline int pwc_set_wb_delay(struct pwc_device *pdev, int delay)
/* useful range is 0x01..0x3F */
buf = (delay >> 10);
return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_CHROM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
AWB_CONTROL_DELAY_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
}
static inline int pwc_get_wb_delay(struct pwc_device *pdev)
static inline int pwc_get_wb_delay(struct pwc_device *pdev, int *value)
{
unsigned char buf;
int ret;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_CHROM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
AWB_CONTROL_DELAY_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
if (ret < 0)
return ret;
return (buf << 10);
*value = buf << 10;
return 0;
}
......@@ -1115,12 +1001,7 @@ static inline int pwc_set_contour(struct pwc_device *pdev, int contour)
buf = 0xff; /* auto contour on */
else
buf = 0x0; /* auto contour off */
ret = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_LUM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
AUTO_CONTOUR_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
if (ret < 0)
return ret;
......@@ -1130,12 +1011,7 @@ static inline int pwc_set_contour(struct pwc_device *pdev, int contour)
contour = 0xffff;
buf = (contour >> 10); /* contour preset is [0..3f] */
ret = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_LUM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
PRESET_CONTOUR_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
if (ret < 0)
return ret;
return 0;
......@@ -1146,26 +1022,16 @@ static inline int pwc_get_contour(struct pwc_device *pdev, int *contour)
unsigned char buf;
int ret;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_LUM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
AUTO_CONTOUR_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
if (ret < 0)
return ret;
if (buf == 0) {
/* auto mode off, query current preset value */
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_LUM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
PRESET_CONTOUR_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
if (ret < 0)
return ret;
*contour = (buf << 10);
*contour = buf << 10;
}
else
*contour = -1;
......@@ -1181,28 +1047,19 @@ static inline int pwc_set_backlight(struct pwc_device *pdev, int backlight)
buf = 0xff;
else
buf = 0x0;
return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
SET_LUM_CTL,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
BACK_LIGHT_COMPENSATION_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
return SendControlMsg(SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
}
static inline int pwc_get_backlight(struct pwc_device *pdev)
static inline int pwc_get_backlight(struct pwc_device *pdev, int *backlight)
{
int ret;
unsigned char buf;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_LUM_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
BACK_LIGHT_COMPENSATION_FORMATTER,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
if (ret < 0)
return ret;
return buf;
*backlight = buf;
return 0;
}
......@@ -1217,7 +1074,7 @@ static inline int pwc_set_flicker(struct pwc_device *pdev, int flicker)
return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
}
static inline int pwc_get_flicker(struct pwc_device *pdev)
static inline int pwc_get_flicker(struct pwc_device *pdev, int *flicker)
{
int ret;
unsigned char buf;
......@@ -1225,7 +1082,8 @@ static inline int pwc_get_flicker(struct pwc_device *pdev)
ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
if (ret < 0)
return ret;
return buf;
*flicker = buf;
return 0;
}
......@@ -1241,7 +1099,7 @@ static inline int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise)
return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
}
static inline int pwc_get_dynamic_noise(struct pwc_device *pdev)
static inline int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise)
{
int ret;
unsigned char buf;
......@@ -1249,7 +1107,8 @@ static inline int pwc_get_dynamic_noise(struct pwc_device *pdev)
ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
if (ret < 0)
return ret;
return buf;
*noise = buf;
return 0;
}
int pwc_mpt_reset(struct pwc_device *pdev, int flags)
......@@ -1293,7 +1152,7 @@ static inline int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_sta
}
int pwc_get_cmos_sensor(struct pwc_device *pdev)
int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor)
{
unsigned char buf;
int ret = -1, request;
......@@ -1305,24 +1164,60 @@ int pwc_get_cmos_sensor(struct pwc_device *pdev)
else
request = SENSOR_TYPE_FORMATTER2;
ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
GET_STATUS_CTL,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
request,
pdev->vcinterface,
&buf, 1, HZ / 2);
ret = RecvControlMsg(GET_STATUS_CTL, request, 1);
if (ret < 0)
return ret;
if (pdev->type < 675)
return buf | 0x100;
*sensor = buf | 0x100;
else
return buf;
*sensor = buf;
return 0;
}
/* End of Add-Ons */
/* ************************************************* */
/* Linux 2.5.something and 2.6 pass direct pointers to arguments of
ioctl() calls. With 2.4, you have to do tedious copy_from_user()
and copy_to_user() calls. With these macros we circumvent this,
and let me maintain only one source file. The functionality is
exactly the same otherwise.
*/
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
/* define local variable for arg */
#define ARG_DEF(ARG_type, ARG_name)\
ARG_type *ARG_name = arg;
/* copy arg to local variable */
#define ARG_IN(ARG_name) /* nothing */
/* argument itself (referenced) */
#define ARGR(ARG_name) (*ARG_name)
/* argument address */
#define ARGA(ARG_name) ARG_name
/* copy local variable to arg */
#define ARG_OUT(ARG_name) /* nothing */
#else
#define ARG_DEF(ARG_type, ARG_name)\
ARG_type ARG_name;
#define ARG_IN(ARG_name)\
if (copy_from_user(&ARG_name, arg, sizeof(ARG_name))) {\
ret = -EFAULT;\
break;\
}
#define ARGR(ARG_name) ARG_name
#define ARGA(ARG_name) &ARG_name
#define ARG_OUT(ARG_name)\
if (copy_to_user(arg, &ARG_name, sizeof(ARG_name))) {\
ret = -EFAULT;\
break;\
}
#endif
int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
{
int ret = 0;
......@@ -1351,225 +1246,254 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
case VIDIOCPWCSCQUAL:
{
int *qual = arg;
ARG_DEF(int, qual)
if (*qual < 0 || *qual > 3)
ARG_IN(qual)
if (ARGR(qual) < 0 || ARGR(qual) > 3)
ret = -EINVAL;
else
ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, *qual, pdev->vsnapshot);
ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, ARGR(qual), pdev->vsnapshot);
if (ret >= 0)
pdev->vcompression = *qual;
pdev->vcompression = ARGR(qual);
break;
}
case VIDIOCPWCGCQUAL:
{
int *qual = arg;
ARG_DEF(int, qual)
*qual = pdev->vcompression;
ARGR(qual) = pdev->vcompression;
ARG_OUT(qual)
break;
}
case VIDIOCPWCPROBE:
{
struct pwc_probe *probe = arg;
ARG_DEF(struct pwc_probe, probe)
strcpy(probe->name, pdev->vdev.name);
probe->type = pdev->type;
strcpy(ARGR(probe).name, pdev->vdev->name);
ARGR(probe).type = pdev->type;
ARG_OUT(probe)
break;
}
case VIDIOCPWCGSERIAL:
{
ARG_DEF(struct pwc_serial, serial)
strcpy(ARGR(serial).serial, pdev->serial);
ARG_OUT(serial)
break;
}
case VIDIOCPWCSAGC:
{
int *agc = arg;
ARG_DEF(int, agc)
if (pwc_set_agc(pdev, *agc < 0 ? 1 : 0, *agc))
ARG_IN(agc)
if (pwc_set_agc(pdev, ARGR(agc) < 0 ? 1 : 0, ARGR(agc)))
ret = -EINVAL;
break;
}
case VIDIOCPWCGAGC:
{
int *agc = arg;
ARG_DEF(int, agc)
if (pwc_get_agc(pdev, agc))
if (pwc_get_agc(pdev, ARGA(agc)))
ret = -EINVAL;
ARG_OUT(agc)
break;
}
case VIDIOCPWCSSHUTTER:
{
int *shutter_speed = arg;
ARG_DEF(int, shutter_speed)
ret = pwc_set_shutter_speed(pdev, *shutter_speed < 0 ? 1 : 0, *shutter_speed);
ARG_IN(shutter_speed)
ret = pwc_set_shutter_speed(pdev, ARGR(shutter_speed) < 0 ? 1 : 0, ARGR(shutter_speed));
break;
}
case VIDIOCPWCSAWB:
{
struct pwc_whitebalance *wb = arg;
ARG_DEF(struct pwc_whitebalance, wb)
ret = pwc_set_awb(pdev, wb->mode);
if (ret >= 0 && wb->mode == PWC_WB_MANUAL) {
pwc_set_red_gain(pdev, wb->manual_red);
pwc_set_blue_gain(pdev, wb->manual_blue);
ARG_IN(wb)
ret = pwc_set_awb(pdev, ARGR(wb).mode);
if (ret >= 0 && ARGR(wb).mode == PWC_WB_MANUAL) {
pwc_set_red_gain(pdev, ARGR(wb).manual_red);
pwc_set_blue_gain(pdev, ARGR(wb).manual_blue);
}
break;
}
case VIDIOCPWCGAWB:
{
struct pwc_whitebalance *wb = arg;
ARG_DEF(struct pwc_whitebalance, wb)
memset(wb, 0, sizeof(*wb));
wb->mode = pwc_get_awb(pdev);
if (wb->mode < 0)
memset(ARGA(wb), 0, sizeof(struct pwc_whitebalance));
ARGR(wb).mode = pwc_get_awb(pdev);
if (ARGR(wb).mode < 0)
ret = -EINVAL;
else {
if (wb->mode == PWC_WB_MANUAL) {
wb->manual_red = pwc_get_red_gain(pdev);
wb->manual_blue = pwc_get_blue_gain(pdev);
if (ARGR(wb).mode == PWC_WB_MANUAL) {
ret = pwc_get_red_gain(pdev, &ARGR(wb).manual_red);
if (ret < 0)
break;
ret = pwc_get_blue_gain(pdev, &ARGR(wb).manual_blue);
if (ret < 0)
break;
}
if (wb->mode == PWC_WB_AUTO) {
wb->read_red = pwc_read_red_gain(pdev);
wb->read_blue = pwc_read_blue_gain(pdev);
if (ARGR(wb).mode == PWC_WB_AUTO) {
ret = pwc_read_red_gain(pdev, &ARGR(wb).read_red);
if (ret < 0)
break;
ret =pwc_read_blue_gain(pdev, &ARGR(wb).read_blue);
if (ret < 0)
break;
}
}
ARG_OUT(wb)
break;
}
case VIDIOCPWCSAWBSPEED:
{
struct pwc_wb_speed *wbs = arg;
ARG_DEF(struct pwc_wb_speed, wbs)
if (wbs->control_speed > 0) {
ret = pwc_set_wb_speed(pdev, wbs->control_speed);
if (ARGR(wbs).control_speed > 0) {
ret = pwc_set_wb_speed(pdev, ARGR(wbs).control_speed);
}
if (wbs->control_delay > 0) {
ret = pwc_set_wb_delay(pdev, wbs->control_delay);
if (ARGR(wbs).control_delay > 0) {
ret = pwc_set_wb_delay(pdev, ARGR(wbs).control_delay);
}
break;
}
case VIDIOCPWCGAWBSPEED:
{
struct pwc_wb_speed *wbs = arg;
ARG_DEF(struct pwc_wb_speed, wbs)
ret = pwc_get_wb_speed(pdev);
ret = pwc_get_wb_speed(pdev, &ARGR(wbs).control_speed);
if (ret < 0)
break;
wbs->control_speed = ret;
ret = pwc_get_wb_delay(pdev);
ret = pwc_get_wb_delay(pdev, &ARGR(wbs).control_delay);
if (ret < 0)
break;
wbs->control_delay = ret;
ARG_OUT(wbs)
break;
}
case VIDIOCPWCSLED:
{
struct pwc_leds *leds = arg;
ARG_DEF(struct pwc_leds, leds)
ret = pwc_set_leds(pdev, leds->led_on, leds->led_off);
ARG_IN(leds)
ret = pwc_set_leds(pdev, ARGR(leds).led_on, ARGR(leds).led_off);
break;
}
case VIDIOCPWCGLED:
{
struct pwc_leds *leds = arg;
ARG_DEF(struct pwc_leds, leds)
ret = pwc_get_leds(pdev, &leds->led_on, &leds->led_off);
ret = pwc_get_leds(pdev, &ARGR(leds).led_on, &ARGR(leds).led_off);
ARG_OUT(leds)
break;
}
case VIDIOCPWCSCONTOUR:
{
int *contour = arg;
ARG_DEF(int, contour)
ret = pwc_set_contour(pdev, *contour);
ARG_IN(contour)
ret = pwc_set_contour(pdev, ARGR(contour));
break;
}
case VIDIOCPWCGCONTOUR:
{
int *contour = arg;
ARG_DEF(int, contour)
ret = pwc_get_contour(pdev, contour);
ret = pwc_get_contour(pdev, ARGA(contour));
ARG_OUT(contour)
break;
}
case VIDIOCPWCSBACKLIGHT:
{
int *backlight = arg;
ARG_DEF(int, backlight)
ret = pwc_set_backlight(pdev, *backlight);
ARG_IN(backlight)
ret = pwc_set_backlight(pdev, ARGR(backlight));
break;
}
case VIDIOCPWCGBACKLIGHT:
{
int *backlight = arg;
ARG_DEF(int, backlight)
ret = pwc_get_backlight(pdev);
if (ret >= 0)
*backlight = ret;
ret = pwc_get_backlight(pdev, ARGA(backlight));
ARG_OUT(backlight)
break;
}
case VIDIOCPWCSFLICKER:
{
int *flicker = arg;
ARG_DEF(int, flicker)
ret = pwc_set_flicker(pdev, *flicker);
ARG_IN(flicker)
ret = pwc_set_flicker(pdev, ARGR(flicker));
break;
}
case VIDIOCPWCGFLICKER:
{
int *flicker = arg;
ARG_DEF(int, flicker)
ret = pwc_get_flicker(pdev);
if (ret >= 0)
*flicker = ret;
ret = pwc_get_flicker(pdev, ARGA(flicker));
ARG_OUT(flicker)
break;
}
case VIDIOCPWCSDYNNOISE:
{
int *dynnoise = arg;
ARG_DEF(int, dynnoise)
ret = pwc_set_dynamic_noise(pdev, *dynnoise);
ARG_IN(dynnoise)
ret = pwc_set_dynamic_noise(pdev, ARGR(dynnoise));
break;
}
case VIDIOCPWCGDYNNOISE:
{
int *dynnoise = arg;
ARG_DEF(int, dynnoise)
ret = pwc_get_dynamic_noise(pdev);
if (ret < 0)
break;
*dynnoise = ret;
ret = pwc_get_dynamic_noise(pdev, ARGA(dynnoise));
ARG_OUT(dynnoise);
break;
}
case VIDIOCPWCGREALSIZE:
{
struct pwc_imagesize *size = arg;
ARG_DEF(struct pwc_imagesize, size)
size->width = pdev->image.x;
size->height = pdev->image.y;
ARGR(size).width = pdev->image.x;
ARGR(size).height = pdev->image.y;
ARG_OUT(size)
break;
}
case VIDIOCPWCMPTRESET:
{
int *flags = arg;
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
ret = pwc_mpt_reset(pdev, *flags);
ARG_DEF(int, flags)
ARG_IN(flags)
ret = pwc_mpt_reset(pdev, ARGR(flags));
if (ret >= 0)
{
pdev->pan_angle = 0;
......@@ -1582,11 +1506,15 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
}
break;
}
case VIDIOCPWCMPTGRANGE:
{
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
memcpy(arg, &pdev->angle_range, sizeof(struct pwc_mpt_range));
ARG_DEF(struct pwc_mpt_range, range)
ARGR(range) = pdev->angle_range;
ARG_OUT(range)
}
else
{
......@@ -1597,23 +1525,25 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
case VIDIOCPWCMPTSANGLE:
{
struct pwc_mpt_angles *angles = arg;
int new_pan, new_tilt;
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
ARG_DEF(struct pwc_mpt_angles, angles)
ARG_IN(angles)
/* The camera can only set relative angles, so
do some calculations when getting an absolute angle .
*/
if (angles->absolute)
if (ARGR(angles).absolute)
{
new_pan = angles->pan;
new_tilt = angles->tilt;
new_pan = ARGR(angles).pan;
new_tilt = ARGR(angles).tilt;
}
else
{
new_pan = pdev->pan_angle + angles->pan;
new_tilt = pdev->tilt_angle + angles->tilt;
new_pan = pdev->pan_angle + ARGR(angles).pan;
new_tilt = pdev->tilt_angle + ARGR(angles).tilt;
}
/* check absolute ranges */
if (new_pan < pdev->angle_range.pan_min ||
......@@ -1653,13 +1583,15 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
case VIDIOCPWCMPTGANGLE:
{
struct pwc_mpt_angles *angles = arg;
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
angles->absolute = 1;
angles->pan = pdev->pan_angle;
angles->tilt = pdev->tilt_angle;
ARG_DEF(struct pwc_mpt_angles, angles)
ARGR(angles).absolute = 1;
ARGR(angles).pan = pdev->pan_angle;
ARGR(angles).tilt = pdev->tilt_angle;
ARG_OUT(angles)
}
else
{
......@@ -1670,11 +1602,12 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
case VIDIOCPWCMPTSTATUS:
{
struct pwc_mpt_status *status = arg;
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
ret = pwc_mpt_get_status(pdev, status);
ARG_DEF(struct pwc_mpt_status, status)
ret = pwc_mpt_get_status(pdev, ARGA(status));
ARG_OUT(status)
}
else
{
......@@ -1683,6 +1616,20 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
break;
}
case VIDIOCPWCGVIDCMD:
{
ARG_DEF(struct pwc_video_command, cmd);
ARGR(cmd).type = pdev->type;
ARGR(cmd).release = pdev->release;
ARGR(cmd).command_len = pdev->cmd_len;
memcpy(&ARGR(cmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
ARGR(cmd).bandlength = pdev->vbandlength;
ARGR(cmd).frame_size = pdev->frame_size;
ARG_OUT(cmd)
break;
}
default:
ret = -ENOIOCTLCMD;
break;
......
drivers/usb/media/pwc-if.c
View file @ 097032ac
/* Linux driver for Philips webcam
USB and Video4Linux interface part.
(C) 1999-2003 Nemosoft Unv.
(C) 1999-2004 Nemosoft Unv.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
......@@ -42,7 +42,7 @@
- Alistar Moire: QuickCam 3000 Pro device/product ID
- Tony Hoyle: Creative Labs Webcam 5 device/product ID
- Mark Burazin: solving hang in VIDIOCSYNC when camera gets unplugged
- Jk Fang: SOTEC Afina Eye ID
- Jk Fang: Sotec Afina Eye ID
- Xavier Roche: QuickCam Pro 4000 ID
- Jens Knudsen: QuickCam Zoom ID
- J. Debert: QuickCam for Notebooks ID
......@@ -90,6 +90,7 @@ static struct usb_device_id pwc_device_table [] = {
{ USB_DEVICE(0x041E, 0x400C) }, /* Creative Webcam 5 */
{ USB_DEVICE(0x041E, 0x4011) }, /* Creative Webcam Pro Ex */
{ USB_DEVICE(0x04CC, 0x8116) }, /* Afina Eye */
{ USB_DEVICE(0x06BE, 0x8116) }, /* new Afina Eye */
{ USB_DEVICE(0x0d81, 0x1910) }, /* Visionite */
{ USB_DEVICE(0x0d81, 0x1900) },
{ }
......@@ -151,7 +152,9 @@ static struct video_device pwc_template = {
.name = "Philips Webcam", /* Filled in later */
.type = VID_TYPE_CAPTURE,
.hardware = VID_HARDWARE_PWC,
.release = video_device_release,
.fops = &pwc_fops,
.minor = -1,
};
/***************************************************************************/
......@@ -258,7 +261,7 @@ static int pwc_allocate_buffers(struct pwc_device *pdev)
return -ENXIO;
}
#endif
/* Allocate Isochronous pipe buffers */
/* Allocate Isochronuous pipe buffers */
for (i = 0; i < MAX_ISO_BUFS; i++) {
if (pdev->sbuf[i].data == NULL) {
kbuf = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL);
......@@ -662,8 +665,8 @@ static void pwc_isoc_handler(struct urb *urb, struct pt_regs *regs)
pdev->vsync = 2;
/* ...copy data to frame buffer, if possible */
if (flen + fbuf->filled > pdev->frame_size) {
Trace(TRACE_FLOW, "Frame buffer overflow (flen = %d, frame_size = %d).\n", flen, pdev->frame_size);
if (flen + fbuf->filled > pdev->frame_total_size) {
Trace(TRACE_FLOW, "Frame buffer overflow (flen = %d, frame_total_size = %d).\n", flen, pdev->frame_total_size);
pdev->vsync = 0; /* Hmm, let's wait for an EOF (end-of-frame) */
pdev->vframes_error++;
}
......@@ -728,7 +731,7 @@ static void pwc_isoc_handler(struct urb *urb, struct pt_regs *regs)
pdev->drop_frames--;
else {
/* Check for underflow first */
if (fbuf->filled < pdev->frame_size) {
if (fbuf->filled < pdev->frame_total_size) {
Trace(TRACE_FLOW, "Frame buffer underflow (%d bytes); discarded.\n", fbuf->filled);
pdev->vframes_error++;
}
......@@ -817,7 +820,7 @@ static int pwc_isoc_init(struct pwc_device *pdev)
if (pdev->vmax_packet_size < 0 || pdev->vmax_packet_size > ISO_MAX_FRAME_SIZE) {
Err("Failed to find packet size for video endpoint in current alternate setting.\n");
return -ENFILE; /* Odd error, that should be noticeable */
return -ENFILE; /* Odd error, that should be noticable */
}
/* Set alternate interface */
......@@ -874,7 +877,7 @@ static int pwc_isoc_init(struct pwc_device *pdev)
if (ret)
Err("isoc_init() submit_urb %d failed with error %d\n", i, ret);
else
Trace(TRACE_OPEN, "URB 0x%p submitted.\n", pdev->sbuf[i].urb);
Trace(TRACE_MEMORY, "URB 0x%p submitted.\n", pdev->sbuf[i].urb);
}
/* All is done... */
......@@ -972,13 +975,16 @@ static int pwc_video_open(struct inode *inode, struct file *file)
Trace(TRACE_OPEN, "Doing first time initialization.\n");
pdev->usb_init = 1;
if (pwc_trace & TRACE_OPEN) {
if (pwc_trace & TRACE_OPEN)
{
/* Query sensor type */
const char *sensor_type = NULL;
int ret;
i = pwc_get_cmos_sensor(pdev);
ret = pwc_get_cmos_sensor(pdev, &i);
if (ret >= 0)
{
switch(i) {
case -1: /* Unknown, show nothing */; break;
case 0x00: sensor_type = "Hyundai CMOS sensor"; break;
case 0x20: sensor_type = "Sony CCD sensor + TDA8787"; break;
case 0x2E: sensor_type = "Sony CCD sensor + Exas 98L59"; break;
......@@ -991,8 +997,9 @@ static int pwc_video_open(struct inode *inode, struct file *file)
case 0x101: sensor_type = "PAL MR sensor"; break;
default: sensor_type = "unknown type of sensor"; break;
}
}
if (sensor_type != NULL)
Info("This %s camera is equipped with a %s (%d).\n", pdev->vdev.name, sensor_type, i);
Info("This %s camera is equipped with a %s (%d).\n", pdev->vdev->name, sensor_type, i);
}
}
......@@ -1037,6 +1044,7 @@ static int pwc_video_open(struct inode *inode, struct file *file)
/* Set some defaults */
pdev->vsnapshot = 0;
/* Start iso pipe for video; first try the last used video size
(or the default one); if that fails try QCIF/10 or QSIF/10;
it that fails too, give up.
......@@ -1139,6 +1147,7 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf,
struct pwc_device *pdev;
int noblock = file->f_flags & O_NONBLOCK;
DECLARE_WAITQUEUE(wait, current);
int bytes_to_read;
Trace(TRACE_READ, "video_read(0x%p, %p, %d) called.\n", vdev, buf, count);
if (vdev == NULL)
......@@ -1182,13 +1191,18 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf,
}
Trace(TRACE_READ, "Copying data to user space.\n");
if (pdev->vpalette == VIDEO_PALETTE_RAW)
bytes_to_read = pdev->frame_size;
else
bytes_to_read = pdev->view.size;
/* copy bytes to user space; we allow for partial reads */
if (count + pdev->image_read_pos > pdev->view.size)
count = pdev->view.size - pdev->image_read_pos;
if (count + pdev->image_read_pos > bytes_to_read)
count = bytes_to_read - pdev->image_read_pos;
if (copy_to_user(buf, pdev->image_ptr[pdev->fill_image] + pdev->image_read_pos, count))
return -EFAULT;
pdev->image_read_pos += count;
if (pdev->image_read_pos >= pdev->view.size) { /* All data has been read */
if (pdev->image_read_pos >= bytes_to_read) { /* All data has been read */
pdev->image_read_pos = 0;
pwc_next_image(pdev);
}
......@@ -1278,8 +1292,6 @@ static int pwc_video_do_ioctl(struct inode *inode, struct file *file,
struct video_picture *p = arg;
int val;
p->colour = 0x8000;
p->hue = 0x8000;
val = pwc_get_brightness(pdev);
if (val >= 0)
p->brightness = val;
......@@ -1302,7 +1314,7 @@ static int pwc_video_do_ioctl(struct inode *inode, struct file *file,
else
p->colour = 0xffff;
p->depth = 24;
p->palette = VIDEO_PALETTE_YUV420P;
p->palette = pdev->vpalette;
p->hue = 0xFFFF; /* N/A */
break;
}
......@@ -1318,13 +1330,22 @@ static int pwc_video_do_ioctl(struct inode *inode, struct file *file,
is used exactly once in the uncompress
routine.
*/
if (p->palette && p->palette != VIDEO_PALETTE_YUV420P) {
return -EINVAL;
}
pwc_set_brightness(pdev, p->brightness);
pwc_set_contrast(pdev, p->contrast);
pwc_set_gamma(pdev, p->whiteness);
pwc_set_saturation(pdev, p->colour);
if (p->palette && p->palette != pdev->vpalette) {
switch (p->palette) {
case VIDEO_PALETTE_YUV420P:
case VIDEO_PALETTE_RAW:
pdev->vpalette = p->palette;
return pwc_try_video_mode(pdev, pdev->image.x, pdev->image.y, pdev->vframes, pdev->vcompression, pdev->vsnapshot);
break;
default:
return -EINVAL;
break;
}
}
break;
}
......@@ -1398,8 +1419,18 @@ static int pwc_video_do_ioctl(struct inode *inode, struct file *file,
various palettes... The driver doesn't support
such small images, so I'm working around it.
*/
if (vm->format && vm->format != VIDEO_PALETTE_YUV420P)
if (vm->format)
{
switch (vm->format)
{
case VIDEO_PALETTE_YUV420P:
case VIDEO_PALETTE_RAW:
break;
default:
return -EINVAL;
break;
}
}
if ((vm->width != pdev->view.x || vm->height != pdev->view.y) &&
(vm->width >= pdev->view_min.x && vm->height >= pdev->view_min.y)) {
......@@ -1523,7 +1554,7 @@ static int pwc_video_do_ioctl(struct inode *inode, struct file *file,
{
struct video_unit *vu = arg;
vu->video = pdev->vdev.minor & 0x3F;
vu->video = pdev->vdev->minor & 0x3F;
vu->audio = -1; /* not known yet */
vu->vbi = -1;
vu->radio = -1;
......@@ -1636,12 +1667,12 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
type_id = 690;
break;
case 0x0310:
Info("Philips PCVC730K (ToUCam Fun) USB webcam detected.\n");
Info("Philips PCVC730K (ToUCam Fun)/PCVC830 (ToUCam II) USB webcam detected.\n");
name = "Philips 730 webcam";
type_id = 730;
break;
case 0x0311:
Info("Philips PCVC740K (ToUCam Pro) USB webcam detected.\n");
Info("Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II) USB webcam detected.\n");
name = "Philips 740 webcam";
type_id = 740;
break;
......@@ -1767,6 +1798,33 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
break;
}
}
else if (vendor_id == 0x06be) {
switch(product_id) {
case 0x8116:
/* Basicly the same as the Sotec Afina Eye */
Info("AME CU-001 USB webcam detected.\n");
name = "AME CU-001";
type_id = 730;
break;
default:
return -ENODEV;
break;
}
}
else if (vendor_id == 0x06be) {
switch(product_id) {
case 0x8116:
/* This is essentially the same cam as the Sotec Afina Eye */
Info("AME Co. Afina Eye USB webcam detected.\n");
name = "AME Co. Afina Eye";
type_id = 750;
break;
default:
return -ENODEV;
break;
}
}
else if (vendor_id == 0x0d81) {
switch(product_id) {
case 0x1900:
......@@ -1804,6 +1862,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
pdev->type = type_id;
pdev->vsize = default_size;
pdev->vframes = default_fps;
strcpy(pdev->serial, serial_number);
pdev->features = features;
if (vendor_id == 0x046D && product_id == 0x08B5)
{
......@@ -1815,8 +1874,6 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
pdev->angle_range.pan_max = 7000;
pdev->angle_range.tilt_min = -3000;
pdev->angle_range.tilt_max = 2500;
pdev->angle_range.zoom_min = -1;
pdev->angle_range.zoom_max = -1;
}
init_MUTEX(&pdev->modlock);
......@@ -1826,10 +1883,18 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
init_waitqueue_head(&pdev->frameq);
pdev->vcompression = pwc_preferred_compression;
memcpy(&pdev->vdev, &pwc_template, sizeof(pwc_template));
strcpy(pdev->vdev.name, name);
pdev->vdev.owner = THIS_MODULE;
pdev->vdev.priv = pdev;
/* Allocate video_device structure */
pdev->vdev = video_device_alloc();
if (pdev->vdev == 0)
{
Err("Err, cannot allocate video_device struture. Failing probe.");
kfree(pdev);
return -ENOMEM;
}
memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template));
strcpy(pdev->vdev->name, name);
pdev->vdev->owner = THIS_MODULE;
video_set_drvdata(pdev->vdev, pdev);
pdev->release = udev->descriptor.bcdDevice;
Trace(TRACE_PROBE, "Release: %04x\n", pdev->release);
......@@ -1848,15 +1913,16 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
}
}
pdev->vdev.release = video_device_release;
i = video_register_device(&pdev->vdev, VFL_TYPE_GRABBER, video_nr);
pdev->vdev->release = video_device_release;
i = video_register_device(pdev->vdev, VFL_TYPE_GRABBER, video_nr);
if (i < 0) {
Err("Failed to register as video device (%d).\n", i);
video_device_release(pdev->vdev); /* Drip... drip... drip... */
kfree(pdev); /* Oops, no memory leaks please */
return -EIO;
}
else {
Info("Registered as /dev/video%d.\n", pdev->vdev.minor & 0x3F);
Info("Registered as /dev/video%d.\n", pdev->vdev->minor & 0x3F);
}
/* occupy slot */
......@@ -1909,7 +1975,7 @@ static void usb_pwc_disconnect(struct usb_interface *intf)
schedule();
/* Device is now closed, so we can safely unregister it */
Trace(TRACE_PROBE, "Unregistering video device in disconnect().\n");
video_unregister_device(&pdev->vdev);
video_unregister_device(pdev->vdev);
/* Free memory (don't set pdev to 0 just yet) */
kfree(pdev);
......@@ -1971,7 +2037,7 @@ MODULE_PARM(dev_hint, "0-20s");
MODULE_PARM_DESC(dev_hint, "Device node hints");
MODULE_DESCRIPTION("Philips & OEM USB webcam driver");
MODULE_AUTHOR("Nemosoft Unv. <nemosoft@smcc.demon.nl>");
MODULE_AUTHOR("Nemosoft Unv. <webcam@smcc.demon.nl>");
MODULE_LICENSE("GPL");
static int __init usb_pwc_init(void)
......@@ -1979,9 +2045,10 @@ static int __init usb_pwc_init(void)
int i, sz;
char *sizenames[PSZ_MAX] = { "sqcif", "qsif", "qcif", "sif", "cif", "vga" };
Info("Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version " PWC_VERSION " loaded.\n");
Info("Also supports the Askey VC010, various Logitech QuickCams, Samsung MPC-C10 and MPC-C30,\n");
Info("the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.\n");
Info("Philips webcam module version " PWC_VERSION " loaded.\n");
Info("Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.\n");
Info("Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,\n");
Info("the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.\n");
if (fps) {
if (fps < 4 || fps > 30) {
......@@ -2041,7 +2108,7 @@ static int __init usb_pwc_init(void)
if (leds[1] >= 0)
led_off = leds[1];
/* Big device node whoopla. Basically, it allows you to assign a
/* Big device node whoopla. Basicly, it allows you to assign a
device node (/dev/videoX) to a camera, based on its type
& serial number. The format is [type[.serialnumber]:]node.
......
drivers/usb/media/pwc-ioctl.h
View file @ 097032ac
#ifndef PWC_IOCTL_H
#define PWC_IOCTL_H
/* (C) 2001-2003 Nemosoft Unv. webcam@smcc.demon.nl
/* (C) 2001-2004 Nemosoft Unv. webcam@smcc.demon.nl
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
......@@ -18,13 +18,18 @@
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* This is pwc-ioctl.h belonging to PWC 8.10 */
/* This is pwc-ioctl.h belonging to PWC 8.12.1
It contains structures and defines to communicate from user space
directly to the driver.
*/
/*
Changes
2001/08/03 Alvarado Added ioctl constants to access methods for
changing white balance and red/blue gains
2002/12/15 G. H. Fernandez-Toribio VIDIOCGREALSIZE
2003/12/13 Nemosft Unv. Some modifications to make interfacing to
PWCX easier
*/
/* These are private ioctl() commands, specific for the Philips webcams.
......@@ -40,6 +45,14 @@
*/
/* Enumeration of image sizes */
#define PSZ_SQCIF 0x00
#define PSZ_QSIF 0x01
#define PSZ_QCIF 0x02
#define PSZ_SIF 0x03
#define PSZ_CIF 0x04
#define PSZ_VGA 0x05
#define PSZ_MAX 6
/* The frame rate is encoded in the video_window.flags parameter using
......@@ -55,13 +68,25 @@
#define PWC_FPS_SNAPSHOT 0x00400000
/* structure for transfering x & y coordinates */
struct pwc_coord
{
int x, y; /* guess what */
int size; /* size, or offset */
};
/* Used with VIDIOCPWCPROBE */
struct pwc_probe
{
char name[32];
int type;
};
struct pwc_serial
{
char serial[30]; /* String with serial number. Contains terminating 0 */
};
/* pwc_whitebalance.mode values */
#define PWC_WB_INDOOR 0
......@@ -78,7 +103,6 @@ struct pwc_probe
otherwise undefined.
'read_red' and 'read_blue' are read-only.
*/
struct pwc_whitebalance
{
int mode;
......@@ -117,7 +141,7 @@ struct pwc_imagesize
#define PWC_MPT_TILT 0x02
#define PWC_MPT_TIMEOUT 0x04 /* for status */
/* Set angles; when absolute = 1, the angle is absolute and the
/* Set angles; when absolute != 0, the angle is absolute and the
driver calculates the relative offset for you. This can only
be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns
absolute angles.
......@@ -127,18 +151,14 @@ struct pwc_mpt_angles
int absolute; /* write-only */
int pan; /* degrees * 100 */
int tilt; /* degress * 100 */
int zoom; /* N/A, set to -1 */
};
/* Range of angles of the camera, both horizontally and vertically.
The zoom is not used, maybe in the future...
*/
struct pwc_mpt_range
{
int pan_min, pan_max; /* degrees * 100 */
int tilt_min, tilt_max;
int zoom_min, zoom_max; /* -1, -1 */
};
struct pwc_mpt_status
......@@ -149,6 +169,30 @@ struct pwc_mpt_status
};
/* This is used for out-of-kernel decompression. With it, you can get
all the necessary information to initialize and use the decompressor
routines in standalone applications.
*/
struct pwc_video_command
{
int type; /* camera type (645, 675, 730, etc.) */
int release; /* release number */
int size; /* one of PSZ_* */
int alternate;
int command_len; /* length of USB video command */
unsigned char command_buf[13]; /* Actual USB video command */
int bandlength; /* >0 = compressed */
int frame_size; /* Size of one (un)compressed frame */
};
/* Flags for PWCX subroutines. Not all modules honour all flags. */
#define PWCX_FLAG_PLANAR 0x0001
#define PWCX_FLAG_BAYER 0x0008
/* IOCTL definitions */
/* Restore user settings */
#define VIDIOCPWCRUSER _IO('v', 192)
/* Save user settings */
......@@ -169,6 +213,9 @@ struct pwc_mpt_status
#define VIDIOCPWCGCQUAL _IOR('v', 195, int)
/* Retrieve serial number of camera */
#define VIDIOCPWCGSERIAL _IOR('v', 198, struct pwc_serial)
/* This is a probe function; since so many devices are supported, it
becomes difficult to include all the names in programs that want to
check for the enhanced Philips stuff. So in stead, try this PROBE;
......@@ -226,4 +273,7 @@ struct pwc_mpt_status
#define VIDIOCPWCMPTGANGLE _IOR('v', 212, struct pwc_mpt_angles)
#define VIDIOCPWCMPTSTATUS _IOR('v', 213, struct pwc_mpt_status)
/* Get the USB set-video command; needed for initializing libpwcx */
#define VIDIOCPWCGVIDCMD _IOR('v', 215, struct pwc_video_command)
#endif
drivers/usb/media/pwc-misc.c
View file @ 097032ac
......@@ -36,9 +36,28 @@ int pwc_decode_size(struct pwc_device *pdev, int width, int height)
{
int i, find;
/* Make sure we don't go beyond our max size */
/* Make sure we don't go beyond our max size.
NB: we have different limits for RAW and normal modes. In case
you don't have the decompressor loaded or use RAW mode,
the maximum viewable size is smaller.
*/
if (pdev->vpalette == VIDEO_PALETTE_RAW)
{
if (width > pdev->abs_max.x || height > pdev->abs_max.y)
{
Debug("VIDEO_PALETTE_RAW: going beyond abs_max.\n");
return -1;
}
}
else
{
if (width > pdev->view_max.x || height > pdev->view_max.y)
{
Debug("VIDEO_PALETTE_ not RAW: going beyond view_max.\n");
return -1;
}
}
/* Find the largest size supported by the camera that fits into the
requested size.
*/
......@@ -62,6 +81,8 @@ void pwc_construct(struct pwc_device *pdev)
pdev->view_min.y = 96;
pdev->view_max.x = 352;
pdev->view_max.y = 288;
pdev->abs_max.x = 352;
pdev->abs_max.y = 288;
pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QCIF | 1 << PSZ_CIF;
pdev->vcinterface = 2;
pdev->vendpoint = 4;
......@@ -77,13 +98,14 @@ void pwc_construct(struct pwc_device *pdev)
if (pdev->decompressor != NULL) {
pdev->view_max.x = 640;
pdev->view_max.y = 480;
pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QSIF | 1 << PSZ_QCIF | 1 << PSZ_SIF | 1 << PSZ_CIF | 1 << PSZ_VGA;
}
else {
pdev->view_max.x = 352;
pdev->view_max.y = 288;
pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QSIF | 1 << PSZ_QCIF | 1 << PSZ_SIF | 1 << PSZ_CIF;
}
pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QSIF | 1 << PSZ_QCIF | 1 << PSZ_SIF | 1 << PSZ_CIF | 1 << PSZ_VGA;
pdev->abs_max.x = 640;
pdev->abs_max.y = 480;
pdev->vcinterface = 3;
pdev->vendpoint = 4;
pdev->frame_header_size = 0;
......@@ -99,24 +121,26 @@ void pwc_construct(struct pwc_device *pdev)
if (pdev->decompressor != NULL) {
pdev->view_max.x = 640;
pdev->view_max.y = 480;
pdev->image_mask = 1 << PSZ_QSIF | 1 << PSZ_SIF | 1 << PSZ_VGA;
}
else {
/* Tell CIF, even though SIF really is the maximum, but some tools really need CIF */
/* We use CIF, not SIF since some tools really need CIF. So we cheat a bit. */
pdev->view_max.x = 352;
pdev->view_max.y = 288;
pdev->image_mask = 1 << PSZ_QSIF | 1 << PSZ_SIF;
}
pdev->image_mask = 1 << PSZ_QSIF | 1 << PSZ_SIF | 1 << PSZ_VGA;
pdev->abs_max.x = 640;
pdev->abs_max.y = 480;
pdev->vcinterface = 3;
pdev->vendpoint = 5;
pdev->frame_header_size = TOUCAM_HEADER_SIZE;
pdev->frame_trailer_size = TOUCAM_TRAILER_SIZE;
break;
}
pdev->vpalette = VIDEO_PALETTE_YUV420P; /* default */
pdev->view_min.size = pdev->view_min.x * pdev->view_min.y;
pdev->view_max.size = pdev->view_max.x * pdev->view_max.y;
/* length of image, in YUV format */
pdev->len_per_image = (pdev->view_max.size * 3) / 2;
/* length of image, in YUV format; always allocate enough memory. */
pdev->len_per_image = (pdev->abs_max.x * pdev->abs_max.y * 3) / 2;
}
drivers/usb/media/pwc-uncompress.c
View file @ 097032ac
......@@ -21,7 +21,9 @@
themselves. It also has a decompressor wrapper function.
*/
#include <asm/current.h>
#include <asm/types.h>
// #include <linux/sched.h>
#include "pwc.h"
#include "pwc-uncompress.h"
......@@ -81,7 +83,6 @@ int pwc_decompress(struct pwc_device *pdev)
u16 *src;
u16 *dsty, *dstu, *dstv;
if (pdev == NULL)
return -EFAULT;
#if defined(__KERNEL__) && defined(PWC_MAGIC)
......@@ -99,6 +100,14 @@ int pwc_decompress(struct pwc_device *pdev)
return -EFAULT;
yuv = fbuf->data + pdev->frame_header_size; /* Skip header */
/* Raw format; that's easy... */
if (pdev->vpalette == VIDEO_PALETTE_RAW)
{
memcpy(image, yuv, pdev->frame_size);
return 0;
}
if (pdev->vbandlength == 0) {
/* Uncompressed mode. We copy the data into the output buffer,
using the viewport size (which may be larger than the image
......@@ -144,11 +153,17 @@ int pwc_decompress(struct pwc_device *pdev)
/* Compressed; the decompressor routines will write the data
in planar format immediately.
*/
int flags;
flags = PWCX_FLAG_PLANAR;
if (pdev->vsize == PSZ_VGA && pdev->vframes == 5 && pdev->vsnapshot)
flags |= PWCX_FLAG_BAYER;
if (pdev->decompressor)
pdev->decompressor->decompress(
&pdev->image, &pdev->view, &pdev->offset,
yuv, image,
1,
flags,
pdev->decompress_data, pdev->vbandlength);
else
return -ENXIO; /* No such device or address: missing decompressor */
......
drivers/usb/media/pwc-uncompress.h
View file @ 097032ac
......@@ -24,9 +24,15 @@
#define PWC_UNCOMPRESS_H
#include <linux/config.h>
#include <linux/linkage.h>
#include <linux/list.h>
#include "pwc.h"
#include "pwc-ioctl.h"
/* from pwc-dec.h */
#define PWCX_FLAG_PLANAR 0x0001
/* */
#ifdef __cplusplus
extern "C" {
......@@ -42,10 +48,11 @@ struct pwc_decompressor
int type; /* type of camera (645, 680, etc) */
int table_size; /* memory needed */
void (* init)(int release, void *buffer, void *table); /* Initialization routine; should be called after each set_video_mode */
void (* init)(int type, int release, void *buffer, void *table); /* Initialization routine; should be called after each set_video_mode */
void (* exit)(void); /* Cleanup routine */
void (* decompress)(struct pwc_coord *image, struct pwc_coord *view, struct pwc_coord *offset,
void *src, void *dst, int planar,
void (* decompress)(struct pwc_coord *image, struct pwc_coord *view,
struct pwc_coord *offset,
void *src, void *dst, int flags,
void *table, int bandlength);
void (* lock)(void); /* make sure module cannot be unloaded */
void (* unlock)(void); /* release lock on module */
......
drivers/usb/media/pwc.h
View file @ 097032ac
......@@ -22,15 +22,15 @@
#include <linux/config.h>
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/spinlock.h>
#include <linux/videodev.h>
#include <linux/wait.h>
#include <linux/smp_lock.h>
#include <asm/semaphore.h>
#include <asm/errno.h>
#include "pwc-uncompress.h"
#include "pwc-ioctl.h"
/* Defines and structures for the Philips webcam */
......@@ -65,9 +65,9 @@
#define FEATURE_MOTOR_PANTILT 0x0001
/* Version block */
#define PWC_MAJOR 8
#define PWC_MINOR 12
#define PWC_VERSION "8.12"
#define PWC_MAJOR 9
#define PWC_MINOR 0
#define PWC_VERSION "9.0.1"
#define PWC_NAME "pwc"
/* Turn certain features on/off */
......@@ -90,12 +90,6 @@
/* Absolute maximum number of buffers available for mmap() */
#define MAX_IMAGES 10
struct pwc_coord
{
int x, y; /* guess what */
int size; /* size, or offset */
};
/* The following structures were based on cpia.h. Why reinvent the wheel? :-) */
struct pwc_iso_buf
{
......@@ -118,7 +112,7 @@ struct pwc_frame_buf
struct pwc_device
{
struct video_device vdev;
struct video_device *vdev;
#ifdef PWC_MAGIC
int magic;
#endif
......@@ -128,6 +122,7 @@ struct pwc_device
int type; /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */
int release; /* release number */
int features; /* feature bits */
char serial[30]; /* serial number (string) */
int error_status; /* set when something goes wrong with the cam (unplugged, USB errors) */
int usb_init; /* set when the cam has been initialized over USB */
......@@ -137,6 +132,7 @@ struct pwc_device
int vcinterface; /* video control interface */
int valternate; /* alternate interface needed */
int vframes, vsize; /* frames-per-second & size (see PSZ_*) */
int vpalette; /* palette: 420P, RAW or RGBBAYER */
int vframe_count; /* received frames */
int vframes_dumped; /* counter for dumped frames */
int vframes_error; /* frames received in error */
......@@ -149,6 +145,9 @@ struct pwc_device
char vsync; /* used by isoc handler */
char vmirror; /* for ToUCaM series */
int cmd_len;
unsigned char cmd_buf[13];
/* The image acquisition requires 3 to 4 steps:
1. data is gathered in short packets from the USB controller
2. data is synchronized and packed into a frame buffer
......@@ -169,8 +168,9 @@ struct pwc_device
struct pwc_frame_buf *full_frames, *full_frames_tail; /* all filled frames */
struct pwc_frame_buf *fill_frame; /* frame currently being filled */
struct pwc_frame_buf *read_frame; /* frame currently read by user process */
int frame_size;
int frame_header_size, frame_trailer_size;
int frame_size;
int frame_total_size; /* including header & trailer */
int drop_frames;
#if PWC_DEBUG
int sequence; /* Debugging aid */
......@@ -187,7 +187,8 @@ struct pwc_device
a gray or black border. view_min <= image <= view <= view_max;
*/
int image_mask; /* bitmask of supported sizes */
struct pwc_coord view_min, view_max; /* minimum and maximum sizes */
struct pwc_coord view_min, view_max; /* minimum and maximum viewable sizes */
struct pwc_coord abs_max; /* maximum supported size with compression */
struct pwc_coord image, view; /* image and viewport size */
struct pwc_coord offset; /* offset within the viewport */
......@@ -213,16 +214,6 @@ struct pwc_device
#endif
};
/* Enumeration of image sizes */
#define PSZ_SQCIF 0x00
#define PSZ_QSIF 0x01
#define PSZ_QCIF 0x02
#define PSZ_SIF 0x03
#define PSZ_CIF 0x04
#define PSZ_VGA 0x05
#define PSZ_MAX 6
#ifdef __cplusplus
extern "C" {
......@@ -259,7 +250,7 @@ extern int pwc_get_saturation(struct pwc_device *pdev);
extern int pwc_set_saturation(struct pwc_device *pdev, int value);
extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value);
extern int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value);
extern int pwc_get_cmos_sensor(struct pwc_device *pdev);
extern int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor);
/* Power down or up the camera; not supported by all models */
extern int pwc_camera_power(struct pwc_device *pdev, int power);
......
drivers/usb/net/kaweth.c
View file @ 097032ac
......@@ -62,7 +62,7 @@
#include <asm/semaphore.h>
#include <asm/byteorder.h>
#define DEBUG
#undef DEBUG
#ifdef DEBUG
#define kaweth_dbg(format, arg...) printk(KERN_DEBUG __FILE__ ": " format "\n" ,##arg)
......@@ -592,7 +592,7 @@ static void kaweth_usb_receive(struct urb *urb, struct pt_regs *regs)
struct sk_buff *skb;
if(unlikely(urb->status == -ECONNRESET || urb->status == -ECONNABORTED))
if(unlikely(urb->status == -ECONNRESET || urb->status == -ECONNABORTED || urb->status == -ESHUTDOWN))
/* we are killed - set a flag and wake the disconnect handler */
{
kaweth->end = 1;
......
drivers/usb/net/pegasus.c
View file @ 097032ac
......@@ -1137,8 +1137,6 @@ static void pegasus_set_multicast(struct net_device *net)
{
pegasus_t *pegasus = net->priv;
netif_stop_queue(net);
if (net->flags & IFF_PROMISC) {
pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
info("%s: Promiscuous mode enabled", net->name);
......@@ -1154,8 +1152,6 @@ static void pegasus_set_multicast(struct net_device *net)
pegasus->flags |= ETH_REGS_CHANGE;
ctrl_callback(pegasus->ctrl_urb, NULL);
netif_wake_queue(net);
}
static __u8 mii_phy_probe(pegasus_t * pegasus)
......
drivers/usb/serial/generic.c
View file @ 097032ac
......@@ -53,6 +53,32 @@ struct usb_serial_device_type usb_serial_generic_device = {
.num_ports = 1,
.shutdown = usb_serial_generic_shutdown,
};
/* we want to look at all devices, as the vendor/product id can change
* depending on the command line argument */
static struct usb_device_id generic_serial_ids[] = {
{.driver_info = 42},
{}
};
static int generic_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
const struct usb_device_id *id_pattern;
id_pattern = usb_match_id(interface, generic_device_ids);
if (id_pattern != NULL)
return usb_serial_probe(interface, id);
return -ENODEV;
}
static struct usb_driver generic_driver = {
.owner = THIS_MODULE,
.name = "usbserial_generic",
.probe = generic_probe,
.disconnect = usb_serial_disconnect,
.id_table = generic_serial_ids,
};
#endif
int usb_serial_generic_register (int _debug)
......@@ -67,6 +93,12 @@ int usb_serial_generic_register (int _debug)
/* register our generic driver with ourselves */
retval = usb_serial_register (&usb_serial_generic_device);
if (retval)
goto exit;
retval = usb_register(&generic_driver);
if (retval)
usb_serial_deregister(&usb_serial_generic_device);
exit:
#endif
return retval;
}
......@@ -75,6 +107,7 @@ void usb_serial_generic_deregister (void)
{
#ifdef CONFIG_USB_SERIAL_GENERIC
/* remove our generic driver */
usb_deregister(&generic_driver);
usb_serial_deregister (&usb_serial_generic_device);
#endif
}
......
drivers/usb/serial/pl2303.c
View file @ 097032ac
......@@ -62,7 +62,7 @@
/*
* Version Information
*/
#define DRIVER_VERSION "v0.10"
#define DRIVER_VERSION "v0.11"
#define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver"
......@@ -82,6 +82,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
{ USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) },
{ } /* Terminating entry */
};
......@@ -172,20 +173,38 @@ static struct usb_serial_device_type pl2303_device = {
.shutdown = pl2303_shutdown,
};
enum pl2303_type {
type_0, /* don't know the difference between type 0 and */
type_1, /* type 1, until someone from prolific tells us... */
HX, /* HX version of the pl2303 chip */
};
struct pl2303_private {
spinlock_t lock;
wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
u8 termios_initialized;
enum pl2303_type type;
};
static int pl2303_startup (struct usb_serial *serial)
{
struct pl2303_private *priv;
enum pl2303_type type = type_0;
int i;
if (serial->dev->descriptor.bDeviceClass == 0x02)
type = type_0;
else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
type = HX;
else if (serial->dev->descriptor.bDeviceClass == 0x00)
type = type_1;
else if (serial->dev->descriptor.bDeviceClass == 0xFF)
type = type_1;
dbg("device type: %d", type);
for (i = 0; i < serial->num_ports; ++i) {
priv = kmalloc (sizeof (struct pl2303_private), GFP_KERNEL);
if (!priv)
......@@ -193,6 +212,7 @@ static int pl2303_startup (struct usb_serial *serial)
memset (priv, 0x00, sizeof (struct pl2303_private));
spin_lock_init(&priv->lock);
init_waitqueue_head(&priv->delta_msr_wait);
priv->type = type;
usb_set_serial_port_data(serial->port[i], priv);
}
return 0;
......@@ -395,20 +415,27 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
if (cflag & CRTSCTS) {
i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
0x0, 0x41, NULL, 0, 100);
dbg ("0x40:0x1:0x0:0x41 %d", i);
__u16 index;
if (priv->type == HX)
index = 0x61;
else
index = 0x41;
i = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
VENDOR_WRITE_REQUEST,
VENDOR_WRITE_REQUEST_TYPE,
0x0, index, NULL, 0, 100);
dbg ("0x40:0x1:0x0:0x%x %d", index, i);
}
kfree (buf);
}
static int pl2303_open (struct usb_serial_port *port, struct file *filp)
{
struct termios tmp_termios;
struct usb_serial *serial = port->serial;
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned char *buf;
int result;
......@@ -439,6 +466,18 @@ static int pl2303_open (struct usb_serial_port *port, struct file *filp)
SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 1);
FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0);
SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0, 1);
SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 1, 0);
if (priv->type == HX) {
/* HX chip */
SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x44);
/* reset upstream data pipes */
SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 8, 0);
SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 9, 0);
} else {
SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x24);
}
kfree(buf);
......
drivers/usb/serial/pl2303.h
View file @ 097032ac
......@@ -42,5 +42,11 @@
#define SITECOM_VENDOR_ID 0x6189
#define SITECOM_PRODUCT_ID 0x2068
/* Alcatel OT535/735 USB cable */
#define ALCATEL_VENDOR_ID 0x11f7
#define ALCATEL_PRODUCT_ID 0x02df
/* Samsung I330 phone cradle */
#define SAMSUNG_VENDOR_ID 0x04e8
#define SAMSUNG_PRODUCT_ID 0x8001
drivers/usb/serial/usb-serial.c
View file @ 097032ac
......@@ -355,25 +355,12 @@
#define DRIVER_DESC "USB Serial Driver core"
#ifdef CONFIG_USB_SERIAL_GENERIC
/* we want to look at all devices, as the vendor/product id can change
* depending on the command line argument */
static struct usb_device_id generic_serial_ids[] = {
{.driver_info = 42},
{}
};
#endif /* CONFIG_USB_SERIAL_GENERIC */
/* Driver structure we register with the USB core */
static struct usb_driver usb_serial_driver = {
.owner = THIS_MODULE,
.name = "usbserial",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
#ifdef CONFIG_USB_SERIAL_GENERIC
.id_table = generic_serial_ids,
#endif
};
/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
......@@ -1383,22 +1370,9 @@ int usb_serial_register(struct usb_serial_device_type *new_device)
void usb_serial_deregister(struct usb_serial_device_type *device)
{
struct usb_serial *serial;
int i;
info("USB Serial deregistering driver %s", device->name);
/* clear out the serial_table if the device is attached to a port */
for(i = 0; i < SERIAL_TTY_MINORS; ++i) {
serial = serial_table[i];
if ((serial != NULL) && (serial->type == device)) {
usb_driver_release_interface (&usb_serial_driver, serial->interface);
usb_serial_disconnect (serial->interface);
}
}
list_del(&device->driver_list);
usb_serial_bus_deregister (device);
usb_serial_bus_deregister(device);
}
......
drivers/usb/storage/transport.c
View file @ 097032ac
......@@ -708,6 +708,12 @@ void usb_stor_invoke_transport(Scsi_Cmnd *srb, struct us_data *us)
srb->sense_buffer[0] = 0x0;
}
}
/* Did we transfer less than the minimum amount required? */
if (srb->result == SAM_STAT_GOOD &&
srb->request_bufflen - srb->resid < srb->underflow)
srb->result = (DID_ERROR << 16) | (SUGGEST_RETRY << 24);
return;
/* abort processing: the bulk-only transport requires a reset
......
drivers/usb/storage/unusual_devs.h
View file @ 097032ac
......@@ -73,6 +73,16 @@ UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
US_SC_8070, US_PR_SCM_ATAPI, init_8200e, 0),
#endif
/* <torsten.scherer@uni-bielefeld.de>: I don't know the name of the bridge
* manufacturer, but I've got an external USB drive by the Revoltec company
* that needs this. otherwise the drive is recognized as /dev/sda, but any
* access to it blocks indefinitely.
*/
UNUSUAL_DEV( 0x0402, 0x5621, 0x0103, 0x0103,
"Revoltec",
"USB/IDE Bridge (ATA/ATAPI)",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
* Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
* always fails and confuses drive.
......@@ -686,7 +696,7 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
UNUSUAL_DEV( 0x097a, 0x0001, 0x0000, 0x0001,
"Minds@Work",
"Digital Wallet",
US_SC_SCSI, US_PR_CB, NULL,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MODE_XLATE ),
UNUSUAL_DEV( 0x0a16, 0x8888, 0x0100, 0x0100,
......
fs/aio.c
View file @ 097032ac
......@@ -624,6 +624,7 @@ void fastcall kick_iocb(struct kiocb *iocb)
queue_work(aio_wq, &ctx->wq);
}
}
EXPORT_SYMBOL(kick_iocb);
/* aio_complete
* Called when the io request on the given iocb is complete.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7