Commit 09893ee8 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: More device tree support updates" from Olof Johansson:
 "This branch contains a number of updates for device tree support on
  several ARM platforms, in particular:

   * AT91 continues the device tree conversion adding support for a
     number of on-chip drivers and other functionality
   * ux500 adds probing of some of the core SoC blocks through device
     tree
   * Initial device tree support for ST SPEAr600 platforms
   * kirkwood continues the conversion to device-tree probing"

Manually merge arch/arm/mach-ux500/Kconfig due to MACH_U8500 rename, and
drivers/usb/gadget/at91_udc.c due to header file include cleanups.

Also do an "evil merge" for the MACH_U8500 config option rename that the
affected RMI4 touchscreen driver in staging.  It's called MACH_MOP500
now, and it was missed during previous merges.

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  ARM: SPEAr600: Add device-tree support to SPEAr600 boards
  ARM: ux500: Provide local timer support for Device Tree
  ARM: ux500: Enable PL022 SSP Controller in Device Tree
  ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree
  ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree
  ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree
  ARM: ux500: db8500: list most devices in the snowball device tree
  ARM: ux500: split dts file for snowball into generic part
  ARM: ux500: combine the board init functions for DT boot
  ARM: ux500: Initial Device Tree support for Snowball
  ARM: ux500: CONFIG: Enable Device Tree support for future endeavours
  ARM: kirkwood: use devicetree for rtc-mv
  ARM: kirkwood: rtc-mv devicetree bindings
  ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0
  ARM: kirkwood: fdt: facilitate new boards during fdt migration
  ARM: kirkwood: fdt: absorb kirkwood_init()
  ARM: kirkwood: fdt: use mrvl ticker symbol
  ARM: orion: wdt: use resource vice direct access
  ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data.
  ARM: orion: spi: remove enable_clock_fix which is not used
  ...
parents 4bb2d100 7d1206bc
......@@ -30,3 +30,63 @@ One interrupt per TC channel in a TC block:
reg = <0xfffdc000 0x100>;
interrupts = <26 4 27 4 28 4>;
};
RSTC Reset Controller required properties:
- compatible: Should be "atmel,<chip>-rstc".
<chip> can be "at91sam9260" or "at91sam9g45"
- reg: Should contain registers location and length
Example:
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
};
RAMC SDRAM/DDR Controller required properties:
- compatible: Should be "atmel,at91sam9260-sdramc",
"atmel,at91sam9g45-ddramc",
- reg: Should contain registers location and length
For at91sam9263 and at91sam9g45 you must specify 2 entries.
Examples:
ramc0: ramc@ffffe800 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe800 0x200>;
};
ramc0: ramc@ffffe400 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe400 0x200
0xffffe600 0x200>;
};
SHDWC Shutdown Controller
required properties:
- compatible: Should be "atmel,<chip>-shdwc".
<chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
- reg: Should contain registers location and length
optional properties:
- atmel,wakeup-mode: String, operation mode of the wakeup mode.
Supported values are: "none", "high", "low", "any".
- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
optional at91sam9260 properties:
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
optional at91sam9rl properties:
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
optional at91sam9x5 properties:
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
Example:
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
};
* Power Management Controller (PMC)
Required properties:
- compatible: Should be "atmel,at91rm9200-pmc"
- reg: Should contain PMC registers location and length
Examples:
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
};
ST SPEAr Platforms Device Tree Bindings
---------------------------------------
Boards with the ST SPEAr600 SoC shall have the following properties:
Required root node property:
compatible = "st,spear600";
Device-Tree bindings for i2c gpio driver
Required properties:
- compatible = "i2c-gpio";
- gpios: sda and scl gpio
Optional properties:
- i2c-gpio,sda-open-drain: sda as open drain
- i2c-gpio,scl-open-drain: scl as open drain
- i2c-gpio,scl-output-only: scl as output only
- i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform)
- i2c-gpio,timeout-ms: timeout to get data
Example nodes:
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioA 23 0 /* sda */
&pioA 24 0 /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
rv3029c2@56 {
compatible = "rv3029c2";
reg = <0x56>;
};
};
Atmel NAND flash
Required properties:
- compatible : "atmel,at91rm9200-nand".
- reg : should specify localbus address and size used for the chip,
and if availlable the ECC.
- atmel,nand-addr-offset : offset for the address latch.
- atmel,nand-cmd-offset : offset for the command latch.
- #address-cells, #size-cells : Must be present if the device has sub-nodes
representing partitions.
- gpios : specifies the gpio pins to control the NAND device. detect is an
optional gpio and may be set to 0 if not present.
Optional properties:
- nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default.
Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
"soft_bch".
- nand-bus-width : 8 or 16 bus width if not present 8
- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
Examples:
nand0: nand@40000000,0 {
compatible = "atmel,at91rm9200-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40000000 0x10000000
0xffffe800 0x200
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
nand-on-flash-bbt;
nand-ecc-mode = "soft";
gpios = <&pioC 13 0
&pioC 14 0
0
>;
partition@0 {
...
};
};
* MTD generic binding
- nand-ecc-mode : String, operation mode of the NAND ecc mode.
Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
"soft_bch".
- nand-bus-width : 8 or 16 bus width if not present 8
- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
Atmel SOC USB controllers
OHCI
Required properties:
- compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
used in host mode.
- num-ports: Number of ports.
- atmel,vbus-gpio: If present, specifies a gpio that needs to be
activated for the bus to be powered.
- atmel,oc-gpio: If present, specifies a gpio that needs to be
activated for the overcurrent detection.
usb0: ohci@00500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 4>;
num-ports = <2>;
};
EHCI
Required properties:
- compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
used in host mode.
usb1: ehci@00800000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 4>;
};
AT91 USB device controller
Required properties:
- compatible: Should be "atmel,at91rm9200-udc"
- reg: Address and length of the register set for the device
- interrupts: Should contain macb interrupt
Optional properties:
- atmel,vbus-gpio: If present, specifies a gpio that needs to be
activated for the bus to be powered.
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 4>;
atmel,vbus-gpio = <&pioC 5 0>;
};
......@@ -11,3 +11,16 @@ Required properties :
- phy_type : Should be one of "ulpi" or "utmi".
- nvidia,vbus-gpio : If present, specifies a gpio that needs to be
activated for the bus to be powered.
Optional properties:
- dr_mode : dual role mode. Indicates the working mode for
nvidia,tegra20-ehci compatible controllers. Can be "host", "peripheral",
or "otg". Default to "host" if not defined for backward compatibility.
host means this is a host controller
peripheral means it is device controller
otg means it can operate as either ("on the go")
- nvidia,has-legacy-mode : boolean indicates whether this controller can
operate in legacy mode (as APX 2500 / 2600). In legacy mode some
registers are accessed through the APB_MISC base address instead of
the USB controller. Since this is a legacy issue it probably does not
warrant a compatible string of its own.
......@@ -59,6 +59,26 @@ aic: interrupt-controller@fffff000 {
reg = <0xfffff000 0x200>;
};
ramc0: ramc@ffffea00 {
compatible = "atmel,at91sam9260-sdramc";
reg = <0xffffea00 0x200>;
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
};
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
};
shdwc@fffffd10 {
compatible = "atmel,at91sam9260-shdwc";
reg = <0xfffffd10 0x10>;
};
pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
......@@ -171,6 +191,49 @@ macb0: ethernet@fffc4000 {
interrupts = <21 4>;
status = "disabled";
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 4>;
status = "disabled";
};
};
nand0: nand@40000000 {
compatible = "atmel,at91rm9200-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40000000 0x10000000
0xffffe800 0x200
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
gpios = <&pioC 13 0
&pioC 14 0
0
>;
status = "disabled";
};
usb0: ohci@00500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 4>;
status = "disabled";
};
};
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioA 23 0 /* sda */
&pioA 24 0 /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
......@@ -15,7 +15,7 @@ / {
compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
chosen {
bootargs = "128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
};
ahb {
......@@ -33,5 +33,17 @@ macb0: ethernet@f802c000 {
status = "okay";
};
};
usb0: ohci@00600000 {
status = "okay";
num-ports = <2>;
atmel,vbus-gpio = <&pioD 19 0
&pioD 20 0
>;
};
usb1: ehci@00700000 {
status = "okay";
};
};
};
......@@ -60,6 +60,22 @@ aic: interrupt-controller@fffff000 {
reg = <0xfffff000 0x200>;
};
ramc0: ramc@ffffe400 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe400 0x200
0xffffe600 0x200>;
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
};
rstc@fffffd00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffd00 0x10>;
};
pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
......@@ -67,6 +83,11 @@ pit: timer@fffffd30 {
};
shdwc@fffffd10 {
compatible = "atmel,at91sam9rl-shdwc";
reg = <0xfffffd10 0x10>;
};
tcb0: timer@fff7c000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
......@@ -180,5 +201,48 @@ macb0: ethernet@fffbc000 {
status = "disabled";
};
};
nand0: nand@40000000 {
compatible = "atmel,at91rm9200-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40000000 0x10000000
0xffffe200 0x200
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
gpios = <&pioC 8 0
&pioC 14 0
0
>;
status = "disabled";
};
usb0: ohci@00700000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
interrupts = <22 4>;
status = "disabled";
};
usb1: ehci@00800000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 4>;
status = "disabled";
};
};
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioA 20 0 /* sda */
&pioA 21 0 /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <5>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
......@@ -14,13 +14,24 @@ / {
compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
chosen {
bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2";
bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
};
memory@70000000 {
reg = <0x70000000 0x4000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
};
ahb {
apb {
dbgu: serial@ffffee00 {
......@@ -36,6 +47,39 @@ macb0: ethernet@fffbc000 {
status = "okay";
};
};
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt;
status = "okay";
boot@0 {
label = "bootstrap/uboot/kernel";
reg = <0x0 0x400000>;
};
rootfs@400000 {
label = "rootfs";
reg = <0x400000 0x3C00000>;
};
data@4000000 {
label = "data";
reg = <0x4000000 0xC000000>;
};
};
usb0: ohci@00700000 {
status = "okay";
num-ports = <2>;
atmel,vbus-gpio = <&pioD 1 0
&pioD 3 0>;
};
usb1: ehci@00800000 {
status = "okay";
};
};
leds {
......
......@@ -58,6 +58,26 @@ aic: interrupt-controller@fffff000 {
reg = <0xfffff000 0x200>;
};
ramc0: ramc@ffffe800 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe800 0x200>;
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
};
rstc@fffffe00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffe00 0x10>;
};
shdwc@fffffe10 {
compatible = "atmel,at91sam9x5-shdwc";
reg = <0xfffffe10 0x10>;
};
pit: timer@fffffe30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
......@@ -172,5 +192,73 @@ macb1: ethernet@f8030000 {
status = "disabled";
};
};
nand0: nand@40000000 {
compatible = "atmel,at91rm9200-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40000000 0x10000000
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
gpios = <&pioC 8 0
&pioC 14 0
0
>;
status = "disabled";
};
usb0: ohci@00600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <22 4>;
status = "disabled";
};
usb1: ehci@00700000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 4>;
status = "disabled";
};
};
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioA 30 0 /* sda */
&pioA 31 0 /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c@1 {
compatible = "i2c-gpio";
gpios = <&pioC 0 0 /* sda */
&pioC 1 0 /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c@2 {
compatible = "i2c-gpio";
gpios = <&pioB 4 0 /* sda */
&pioB 5 0 /* scl */
>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
......@@ -12,6 +12,51 @@ memory@20000000 {
reg = <0x20000000 0x8000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
};
ahb {
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt;
status = "okay";
at91bootstrap@0 {
label = "at91bootstrap";
reg = <0x0 0x40000>;
};
uboot@40000 {
label = "u-boot";
reg = <0x40000 0x80000>;
};
ubootenv@c0000 {
label = "U-Boot Env";
reg = <0xc0000 0x140000>;
};
kernel@200000 {
label = "kernel";
reg = <0x200000 0x600000>;
};
rootfs@800000 {
label = "rootfs";
reg = <0x800000 0x1f800000>;
};
};
};
leds {
compatible = "gpio-leds";
......
/*
* Copyright 2012 Linaro Ltd
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
soc-u9500 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "stericsson,db8500";
interrupt-parent = <&intc>;
ranges;
intc: interrupt-controller@a0411000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
interrupt-parent;
reg = <0xa0411000 0x1000>,
<0xa0410100 0x100>;
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xa0412000 0x1000>;
interrupts = <0 13 4>;
cache-unified;
cache-level = <2>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 7 0x4>;
};
timer@a0410600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xa0410600 0x20>;
interrupts = <1 13 0x304>;
};
rtc@80154000 {
compatible = "stericsson,db8500-rtc";
reg = <0x80154000 0x1000>;
interrupts = <0 18 0x4>;
};
gpio0: gpio@8012e000 {
compatible = "stericsson,db8500-gpio",
"stmicroelectronics,nomadik-gpio";
reg = <0x8012e000 0x80>;
interrupts = <0 119 0x4>;
supports-sleepmode;
gpio-controller;
};
gpio1: gpio@8012e080 {
compatible = "stericsson,db8500-gpio",
"stmicroelectronics,nomadik-gpio";
reg = <0x8012e080 0x80>;
interrupts = <0 120 0x4>;
supports-sleepmode;
gpio-controller;
};
gpio2: gpio@8000e000 {
compatible = "stericsson,db8500-gpio",
"stmicroelectronics,nomadik-gpio";
reg = <0x8000e000 0x80>;
interrupts = <0 121 0x4>;
supports-sleepmode;
gpio-controller;
};
gpio3: gpio@8000e080 {
compatible = "stericsson,db8500-gpio",
"stmicroelectronics,nomadik-gpio";
reg = <0x8000e080 0x80>;
interrupts = <0 122 0x4>;
supports-sleepmode;
gpio-controller;
};
gpio4: gpio@8000e100 {
compatible = "stericsson,db8500-gpio",
"stmicroelectronics,nomadik-gpio";
reg = <0x8000e100 0x80>;
interrupts = <0 123 0x4>;
supports-sleepmode;
gpio-controller;
};
gpio5: gpio@8000e180 {
compatible = "stericsson,db8500-gpio",
"stmicroelectronics,nomadik-gpio";
reg = <0x8000e180 0x80>;
interrupts = <0 124 0x4>;
supports-sleepmode;
gpio-controller;
};
gpio6: gpio@8011e000 {
compatible = "stericsson,db8500-gpio",
"stmicroelectronics,nomadik-gpio";
reg = <0x8011e000 0x80>;
interrupts = <0 125 0x4>;
supports-sleepmode;
gpio-controller;
};
gpio7: gpio@8011e080 {
compatible = "stericsson,db8500-gpio",
"stmicroelectronics,nomadik-gpio";
reg = <0x8011e080 0x80>;
interrupts = <0 126 0x4>;
supports-sleepmode;
gpio-controller;
};
gpio8: gpio@a03fe000 {
compatible = "stericsson,db8500-gpio",
"stmicroelectronics,nomadik-gpio";
reg = <0xa03fe000 0x80>;
interrupts = <0 127 0x4>;
supports-sleepmode;
gpio-controller;
};
usb@a03e0000 {
compatible = "stericsson,db8500-musb",
"mentor,musb";
reg = <0xa03e0000 0x10000>;
interrupts = <0 23 0x4>;
};
dma-controller@801C0000 {
compatible = "stericsson,db8500-dma40",
"stericsson,dma40";
reg = <0x801C0000 0x1000 0x40010000 0x800>;
interrupts = <0 25 0x4>;
};
prcmu@80157000 {
compatible = "stericsson,db8500-prcmu";
reg = <0x80157000 0x1000>;
interrupts = <46 47>;
#address-cells = <1>;
#size-cells = <0>;
ab8500@5 {
compatible = "stericsson,ab8500";
reg = <5>; /* mailbox 5 is i2c */
interrupts = <0 40 0x4>;
};
};
i2c@80004000 {
compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
reg = <0x80004000 0x1000>;
interrupts = <0 21 0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@80122000 {
compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
reg = <0x80122000 0x1000>;
interrupts = <0 22 0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@80128000 {
compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
reg = <0x80128000 0x1000>;
interrupts = <0 55 0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@80110000 {
compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
reg = <0x80110000 0x1000>;
interrupts = <0 12 0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@8012a000 {
compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
reg = <0x8012a000 0x1000>;
interrupts = <0 51 0x4>;
#address-cells = <1>;
#size-cells = <0>;
};
ssp@80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <80002000 0x1000>;
interrupts = <0 14 0x4>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
// Add one of these for each child device
cs-gpios = <&gpio0 31 &gpio4 14 &gpio4 16 &gpio6 22 &gpio7 0>;
};
uart@80120000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80120000 0x1000>;
interrupts = <0 11 0x4>;
status = "disabled";
};
uart@80121000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80121000 0x1000>;
interrupts = <0 19 0x4>;
status = "disabled";
};
uart@80007000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80007000 0x1000>;
interrupts = <0 26 0x4>;
status = "disabled";
};
sdi@80126000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
interrupts = <0 60 0x4>;
status = "disabled";
};
sdi@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
interrupts = <0 50 0x4>;
status = "disabled";
};
sdi@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
interrupts = <0 41 0x4>;
status = "disabled";
};
sdi@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
};
sdi@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 99 0x4>;
status = "disabled";
};
sdi@80008000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 100 0x4>;
status = "disabled";
};
};
};
......@@ -4,7 +4,7 @@
/ {
model = "Globalscale Technologies Dreamplug";
compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
memory {
device_type = "memory";
......@@ -15,11 +15,10 @@ chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
serial@f1012000 {
compatible = "ns16550a";
reg = <0xf1012000 0xff>;
reg-shift = <2>;
interrupts = <33>;
ocp@f1000000 {
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};
};
};
/include/ "skeleton.dtsi"
/ {
compatible = "marvell,kirkwood";
};
compatible = "mrvl,kirkwood";
ocp@f1000000 {
compatible = "simple-bus";
ranges = <0 0xf1000000 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
serial@12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <33>;
/* set clock-frequency in board dts */
status = "disabled";
};
serial@12100 {
compatible = "ns16550a";
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <34>;
/* set clock-frequency in board dts */
status = "disabled";
};
rtc@10300 {
compatible = "mrvl,kirkwood-rtc", "mrvl,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
};
};
};
/*
* Copyright 2011 ST-Ericsson AB
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "db8500.dtsi"
/ {
model = "Calao Systems Snowball platform with device tree";
compatible = "calaosystems,snowball-a9500";
memory {
reg = <0x00000000 0x20000000>;
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
debounce_interval = <50>;
wakeup = <1>;
linux,code = <2>;
label = "userpb";
gpios = <&gpio1 0>;
};
button@2 {
debounce_interval = <50>;
wakeup = <1>;
linux,code = <3>;
label = "userpb";
gpios = <&gpio4 23>;
};
button@3 {
debounce_interval = <50>;
wakeup = <1>;
linux,code = <4>;
label = "userpb";
gpios = <&gpio4 23>;
};
button@4 {
debounce_interval = <50>;
wakeup = <1>;
linux,code = <5>;
label = "userpb";
gpios = <&gpio5 1>;
};
button@5 {
debounce_interval = <50>;
wakeup = <1>;
linux,code = <6>;
label = "userpb";
gpios = <&gpio5 2>;
};
};
leds {
compatible = "gpio-leds";
used-led {
label = "user_led";
gpios = <&gpio4 14>;
};
};
soc-u9500 {
external-bus@50000000 {
compatible = "simple-bus";
reg = <0x50000000 0x10000000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
ethernet@50000000 {
compatible = "smsc,9111";
reg = <0x50000000 0x10000>;
interrupts = <12>;
interrupt-parent = <&gpio4>;
};
};
sdi@80126000 {
status = "enabled";
cd-gpios = <&gpio6 26>;
};
sdi@80114000 {
status = "enabled";
};
uart@80120000 {
status = "okay";
};
uart@80121000 {
status = "okay";
};
uart@80007000 {
status = "okay";
};
i2c@80004000 {
tc3589x@42 {
//compatible = "tc3589x";
reg = <0x42>;
interrupts = <25>;
interrupt-parent = <&gpio6>;
};
tps61052@33 {
//compatible = "tps61052";
reg = <0x33>;
};
};
i2c@80128000 {
lp5521@0x33 {
// compatible = "lp5521";
reg = <0x33>;
};
lp5521@0x34 {
// compatible = "lp5521";
reg = <0x34>;
};
bh1780@0x29 {
// compatible = "rohm,bh1780gli";
reg = <0x33>;
};
};
};
};
/*
* Copyright 2012 Stefan Roese <sr@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "spear600.dtsi"
/ {
model = "ST SPEAr600 Evaluation Board";
compatible = "st,spear600-evb", "st,spear600";
#address-cells = <1>;
#size-cells = <1>;
memory {
device_type = "memory";
reg = <0 0x10000000>;
};
ahb {
gmac: ethernet@e0800000 {
phy-mode = "gmii";
status = "okay";
};
apb {
serial@d0000000 {
status = "okay";
};
serial@d0080000 {
status = "okay";
};
i2c@d0200000 {
clock-frequency = <400000>;
status = "okay";
};
};
};
};
/*
* Copyright 2012 Stefan Roese <sr@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
compatible = "st,spear600";
cpus {
cpu@0 {
compatible = "arm,arm926ejs";
};
};
memory {
device_type = "memory";
reg = <0 0x40000000>;
};
ahb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0xd0000000 0xd0000000 0x30000000>;
vic0: interrupt-controller@f1100000 {
compatible = "arm,pl190-vic";
interrupt-controller;
reg = <0xf1100000 0x1000>;
#interrupt-cells = <1>;
};
vic1: interrupt-controller@f1000000 {
compatible = "arm,pl190-vic";
interrupt-controller;
reg = <0xf1000000 0x1000>;
#interrupt-cells = <1>;
};
gmac: ethernet@e0800000 {
compatible = "st,spear600-gmac";
reg = <0xe0800000 0x8000>;
interrupt-parent = <&vic1>;
interrupts = <24 23>;
interrupt-names = "macirq", "eth_wake_irq";
status = "disabled";
};
fsmc: flash@d1800000 {
compatible = "st,spear600-fsmc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xd1800000 0x1000 /* FSMC Register */
0xd2000000 0x4000>; /* NAND Base */
reg-names = "fsmc_regs", "nand_data";
st,ale-off = <0x20000>;
st,cle-off = <0x10000>;
status = "disabled";
};
smi: flash@fc000000 {
compatible = "st,spear600-smi";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xfc000000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <12>;
status = "disabled";
};
ehci@e1800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe1800000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <27>;
status = "disabled";
};
ehci@e2000000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe2000000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <29>;
status = "disabled";
};
ohci@e1900000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe1900000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <26>;
status = "disabled";
};
ohci@e2100000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe2100000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <28>;
status = "disabled";
};
apb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0xd0000000 0xd0000000 0x30000000>;
serial@d0000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xd0000000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <24>;
status = "disabled";
};
serial@d0080000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xd0080000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <25>;
status = "disabled";
};
/* local/cpu GPIO */
gpio0: gpio@f0100000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xf0100000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <18>;
};
/* basic GPIO */
gpio1: gpio@fc980000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfc980000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <19>;
};
/* appl GPIO */
gpio2: gpio@d8100000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xd8100000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <4>;
};
i2c@d0200000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xd0200000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <28>;
status = "disabled";
};
};
};
};
......@@ -112,6 +112,7 @@ sdhci@c8000600 {
usb@c5000000 {
nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
dr_mode = "otg";
};
gpio-keys {
......
......@@ -190,6 +190,7 @@ usb@c5000000 {
reg = <0xc5000000 0x4000>;
interrupts = < 0 20 0x04 >;
phy_type = "utmi";
nvidia,has-legacy-mode;
};
usb@c5004000 {
......
/*
* calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
*
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2.
*/
/ {
ahb {
apb {
usart1: serial@fffb4000 {
status = "okay";
};
usart3: serial@fffd0000 {
status = "okay";
};
};
};
i2c-gpio@0 {
status = "okay";
};
leds {
compatible = "gpio-leds";
user_led1 {
label = "user_led1";
gpios = <&pioB 20 1>;
};
/*
* led already used by mother board but active as high
* user_led2 {
* label = "user_led2";
* gpios = <&pioB 21 1>;
* };
*/
user_led3 {
label = "user_led3";
gpios = <&pioB 22 1>;
};
user_led4 {
label = "user_led4";
gpios = <&pioB 23 1>;
};
red {
label = "red";
gpios = <&pioB 24 1>;
};
orange {
label = "orange";
gpios = <&pioB 30 1>;
};
green {
label = "green";
gpios = <&pioB 31 1>;
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
user_pb1 {
label = "user_pb1";
gpios = <&pioB 25 1>;
linux,code = <0x100>;
};
user_pb2 {
label = "user_pb2";
gpios = <&pioB 13 1>;
linux,code = <0x101>;
};
user_pb3 {
label = "user_pb3";
gpios = <&pioA 26 1>;
linux,code = <0x102>;
};
user_pb4 {
label = "user_pb4";
gpios = <&pioC 9 1>;
linux,code = <0x103>;
};
};
};
......@@ -13,13 +13,24 @@ / {
compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
chosen {
bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data) root=/dev/mtdblock5 rw rootfstype=ubifs";
bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
};
memory@20000000 {
reg = <0x20000000 0x4000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
};
ahb {
apb {
dbgu: serial@fffff200 {
......@@ -30,6 +41,58 @@ macb0: ethernet@fffc4000 {
phy-mode = "rmii";
status = "okay";
};
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 0>;
status = "okay";
};
};
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt;
status = "okay";
at91bootstrap@0 {
label = "at91bootstrap";
reg = <0x0 0x20000>;
};
barebox@20000 {
label = "barebox";
reg = <0x20000 0x40000>;
};
bareboxenv@60000 {
label = "bareboxenv";
reg = <0x60000 0x20000>;
};
bareboxenv2@80000 {
label = "bareboxenv2";
reg = <0x80000 0x20000>;
};
kernel@a0000 {
label = "kernel";
reg = <0xa0000 0x400000>;
};
rootfs@4a0000 {
label = "rootfs";
reg = <0x4a0000 0x7800000>;
};
data@7ca0000 {
label = "data";
reg = <0x7ca0000 0x8360000>;
};
};
usb0: ohci@00500000 {
num-ports = <2>;
status = "okay";
};
};
......@@ -55,4 +118,13 @@ user_pb {
gpio-key,wakeup;
};
};
i2c@0 {
status = "okay";
rv3029c2@56 {
compatible = "rv3029c2";
reg = <0x56>;
};
};
};
......@@ -74,6 +74,8 @@ CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_SPIDEV=y
......@@ -105,6 +107,7 @@ CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=y
......
......@@ -13,6 +13,7 @@ CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
CONFIG_MACH_UX500_DT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
......
......@@ -20,9 +20,11 @@ config HAVE_AT91_USART5
config AT91_SAM9_ALT_RESET
bool
default !ARCH_AT91X40
config AT91_SAM9G45_RESET
bool
default !ARCH_AT91X40
menu "Atmel AT91 System-on-Chip"
......@@ -45,7 +47,6 @@ config ARCH_AT91SAM9260
select HAVE_AT91_USART4
select HAVE_AT91_USART5
select HAVE_NET_MACB
select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9261
bool "AT91SAM9261"
......@@ -53,7 +54,6 @@ config ARCH_AT91SAM9261
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
select HAVE_AT91_DBGU0
select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
......@@ -61,7 +61,6 @@ config ARCH_AT91SAM9G10
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9263
bool "AT91SAM9263"
......@@ -70,7 +69,6 @@ config ARCH_AT91SAM9263
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select HAVE_AT91_DBGU1
select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
......@@ -79,7 +77,6 @@ config ARCH_AT91SAM9RL
select HAVE_AT91_USART3
select HAVE_FB_ATMEL
select HAVE_AT91_DBGU0
select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
......@@ -90,7 +87,6 @@ config ARCH_AT91SAM9G20
select HAVE_AT91_USART4
select HAVE_AT91_USART5
select HAVE_NET_MACB
select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
......@@ -100,7 +96,6 @@ config ARCH_AT91SAM9G45
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select HAVE_AT91_DBGU1
select AT91_SAM9G45_RESET
config ARCH_AT91SAM9X5
bool "AT91SAM9x5 family"
......@@ -109,7 +104,6 @@ config ARCH_AT91SAM9X5
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select HAVE_AT91_DBGU0
select AT91_SAM9G45_RESET
config ARCH_AT91X40
bool "AT91x40"
......
......@@ -216,6 +216,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk),
CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk),
CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
......
......@@ -232,6 +232,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
/* more tc lookup table for DT entries */
CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
......
......@@ -131,7 +131,7 @@ static struct clk dma1_clk = {
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk uhphs_clk = {
.name = "uhphs_clk",
.name = "uhphs",
.pmc_mask = 1 << AT91SAM9X5_ID_UHPHS,
.type = CLK_TYPE_PERIPHERAL,
};
......@@ -230,6 +230,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
/* additional fake clock for macb_hclk */
CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk),
CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
};
/*
......@@ -299,25 +302,14 @@ static void __init at91sam9x5_map_io(void)
at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
}
static void __init at91sam9x5_ioremap_registers(void)
{
at91_ioremap_ramc(0, AT91SAM9X5_BASE_DDRSDRC0, 512);
}
void __init at91sam9x5_initialize(void)
{
arm_pm_restart = at91sam9g45_restart;
at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0);
/* Register GPIO subsystem (using DT) */
at91_gpio_init(NULL, 0);
}
/* --------------------------------------------------------------------
* AT91SAM9x5 devices (temporary before modification of code)
* -------------------------------------------------------------------- */
void __init at91_add_device_nand(struct atmel_nand_data *data) {}
/* --------------------------------------------------------------------
* Interrupt initialization
* -------------------------------------------------------------------- */
......@@ -362,7 +354,6 @@ static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91sam9x5_soc = {
.map_io = at91sam9x5_map_io,
.default_irq_priority = at91sam9x5_default_irq_priority,
.ioremap_registers = at91sam9x5_ioremap_registers,
.register_clocks = at91sam9x5_register_clocks,
.init = at91sam9x5_initialize,
};
......@@ -138,6 +138,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.bus_width_16 = 0,
.ecc_mode = NAND_ECC_SOFT,
.parts = afeb9260_nand_partition,
.num_parts = ARRAY_SIZE(afeb9260_nand_partition),
.det_pin = -EINVAL,
......
......@@ -140,6 +140,7 @@ static struct atmel_nand_data __initdata cam60_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA9,
.enable_pin = AT91_PIN_PA7,
.ecc_mode = NAND_ECC_SOFT,
.parts = cam60_nand_partition,
.num_parts = ARRAY_SIZE(cam60_nand_partition),
};
......
......@@ -117,6 +117,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = {
.enable_pin = AT91_PIN_PC14,
.bus_width_16 = 0,
.det_pin = -EINVAL,
.ecc_mode = NAND_ECC_SOFT,
};
#ifdef CONFIG_MACH_CPU9260
......
......@@ -19,10 +19,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/system_rev.h>
#include <mach/at91sam9_smc.h>
#include <asm/setup.h>
#include <asm/irq.h>
......@@ -30,58 +27,9 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "sam9_smc.h"
#include "generic.h"
static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
}
/* det_pin is not connected */
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 2,
.ncs_write_setup = 0,
.nwe_setup = 2,
.ncs_read_pulse = 4,
.nrd_pulse = 4,
.ncs_write_pulse = 4,
.nwe_pulse = 4,
.read_cycle = 7,
.write_cycle = 7,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
.tdf_cycles = 3,
};
static void __init ek_add_device_nand(void)
{
ek_nand_data.bus_width_16 = board_have_nand_16bit();
/* setup bus-width (8 or 16) */
if (ek_nand_data.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
else
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
static const struct of_device_id irq_of_match[] __initconst = {
{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
......@@ -98,9 +46,6 @@ static void __init at91_dt_init_irq(void)
static void __init at91_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
/* NAND */
ek_add_device_nand();
}
static const char *at91_dt_board_compat[] __initdata = {
......@@ -114,7 +59,7 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
/* Maintainer: Atmel */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_early = at91_dt_initialize,
.init_irq = at91_dt_init_irq,
.init_machine = at91_dt_device_init,
.dt_compat = at91_dt_board_compat,
......
......@@ -108,6 +108,7 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC29,
.enable_pin = AT91_PIN_PC28,
.ecc_mode = NAND_ECC_SOFT,
.parts = kb9202_nand_partition,
.num_parts = ARRAY_SIZE(kb9202_nand_partition),
};
......
......@@ -190,6 +190,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = {
.rdy_pin = AT91_PIN_PB19,
.rdy_pin_active_low = 1,
.enable_pin = AT91_PIN_PD15,
.ecc_mode = NAND_ECC_SOFT,
.parts = neocore926_nand_partition,
.num_parts = ARRAY_SIZE(neocore926_nand_partition),
.det_pin = -EINVAL,
......
......@@ -138,6 +138,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
......
......@@ -150,6 +150,8 @@ static struct atmel_nand_data __initdata dk_nand_data = {
.det_pin = AT91_PIN_PB1,
.rdy_pin = AT91_PIN_PC2,
.enable_pin = -EINVAL,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = dk_nand_partition,
.num_parts = ARRAY_SIZE(dk_nand_partition),
};
......
......@@ -139,6 +139,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.ecc_mode = NAND_ECC_SOFT,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
......
......@@ -181,6 +181,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
......
......@@ -187,6 +187,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC15,
.enable_pin = AT91_PIN_PC14,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
......
......@@ -187,6 +187,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
......
......@@ -166,6 +166,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.det_pin = -EINVAL,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
......
......@@ -148,6 +148,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
.det_pin = -EINVAL,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
......
......@@ -94,6 +94,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PD17,
.enable_pin = AT91_PIN_PB6,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
......
......@@ -110,6 +110,7 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = {
.bus_width_16 = 0,
.enable_pin = -EINVAL,
.det_pin = -EINVAL,
.ecc_mode = NAND_ECC_SOFT,
};
static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
......
......@@ -86,6 +86,7 @@ static struct atmel_nand_data __initdata nand_data = {
.enable_pin = AT91_PIN_PC14,
.bus_width_16 = 0,
.det_pin = -EINVAL,
.ecc_mode = NAND_ECC_SOFT,
};
static struct sam9_smc_config __initdata nand_smc_config = {
......
......@@ -198,6 +198,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
......
......@@ -182,6 +182,7 @@ static struct atmel_nand_data __initdata yl9200_nand_data = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
.enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
.ecc_mode = NAND_ECC_SOFT,
.parts = yl9200_nand_partition,
.num_parts = ARRAY_SIZE(yl9200_nand_partition),
};
......
......@@ -23,6 +23,7 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <mach/hardware.h>
#include <mach/at91_pmc.h>
......@@ -671,16 +672,12 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
}
int __init at91_clock_init(unsigned long main_clock)
static int __init at91_pmc_init(unsigned long main_clock)
{
unsigned tmp, freq, mckr;
int i;
int pll_overclock = false;
at91_pmc_base = ioremap(AT91_PMC, 256);
if (!at91_pmc_base)
panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
/*
* When the bootloader initialized the main oscillator correctly,
* there's no problem using the cycle counter. But if it didn't,
......@@ -802,6 +799,55 @@ int __init at91_clock_init(unsigned long main_clock)
return 0;
}
#if defined(CONFIG_OF)
static struct of_device_id pmc_ids[] = {
{ .compatible = "atmel,at91rm9200-pmc" },
{ /*sentinel*/ }
};
static struct of_device_id osc_ids[] = {
{ .compatible = "atmel,osc" },
{ /*sentinel*/ }
};
int __init at91_dt_clock_init(void)
{
struct device_node *np;
u32 main_clock = 0;
np = of_find_matching_node(NULL, pmc_ids);
if (!np)
panic("unable to find compatible pmc node in dtb\n");
at91_pmc_base = of_iomap(np, 0);
if (!at91_pmc_base)
panic("unable to map pmc cpu registers\n");
of_node_put(np);
/* retrieve the freqency of fixed clocks from device tree */
np = of_find_matching_node(NULL, osc_ids);
if (np) {
u32 rate;
if (!of_property_read_u32(np, "clock-frequency", &rate))
main_clock = rate;
}
of_node_put(np);
return at91_pmc_init(main_clock);
}
#endif
int __init at91_clock_init(unsigned long main_clock)
{
at91_pmc_base = ioremap(AT91_PMC, 256);
if (!at91_pmc_base)
panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
return at91_pmc_init(main_clock);
}
/*
* Several unused clocks may be active. Turn them off.
*/
......
......@@ -20,6 +20,7 @@ extern void __init at91_init_sram(int bank, unsigned long base,
extern void __init at91rm9200_set_type(int type);
extern void __init at91_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91_dt_initialize(void);
/* Interrupts */
extern void __init at91_init_irq_default(void);
......@@ -52,6 +53,7 @@ extern void __init at91sam9rl_set_console_clock(int id);
extern void __init at91sam9g45_set_console_clock(int id);
#ifdef CONFIG_AT91_PMC_UNIT
extern int __init at91_clock_init(unsigned long main_clock);
extern int __init at91_dt_clock_init(void);
#else
static int inline at91_clock_init(unsigned long main_clock) { return 0; }
#endif
......
......@@ -36,9 +36,11 @@ extern void __iomem *at91_shdwc_base;
#define AT91_SHDW_WKMODE0_HIGH 1
#define AT91_SHDW_WKMODE0_LOW 2
#define AT91_SHDW_WKMODE0_ANYLEVEL 3
#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */
#define AT91_SHDW_CPTWK0_MAX 0xf /* Maximum Counter On Wake Up 0 */
#define AT91_SHDW_CPTWK0 (AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */
#define AT91_SHDW_CPTWK0_(x) ((x) << 4)
#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
#define AT91_SHDW_RTCWKEN (1 << 17) /* Real Time Clock Wake-up Enable */
#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */
#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
......
......@@ -54,11 +54,6 @@
#define AT91SAM9X5_BASE_USART1 0xf8020000
#define AT91SAM9X5_BASE_USART2 0xf8024000
/*
* System Peripherals
*/
#define AT91SAM9X5_BASE_DDRSDRC0 0xffffe800
/*
* Base addresses for early serial code (uncompress.h)
*/
......
......@@ -41,6 +41,7 @@
#include <sound/atmel-ac97c.h>
#include <linux/serial.h>
#include <linux/platform_data/macb.h>
#include <linux/platform_data/atmel.h>
/* USB Device */
struct at91_udc_data {
......@@ -98,20 +99,6 @@ extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
/* NAND / SmartMedia */
struct atmel_nand_data {
int enable_pin; /* chip enable */
int det_pin; /* card detect */
int rdy_pin; /* ready/busy */
u8 rdy_pin_active_low; /* rdy_pin value is inverted */
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
u8 correction_cap; /* PMECC correction capability */
u16 sector_size; /* Sector size for PMECC */
struct mtd_partition *parts;
unsigned int num_parts;
};
extern void __init at91_add_device_nand(struct atmel_nand_data *data);
/* I2C*/
......
......@@ -197,19 +197,6 @@ extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
extern u32 at91_slow_clock_sz;
#endif
void __iomem *at91_ramc_base[2];
void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
{
if (id < 0 || id > 1) {
pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
BUG();
}
at91_ramc_base[id] = ioremap(addr, size);
if (!at91_ramc_base[id])
panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
}
static int at91_pm_enter(suspend_state_t state)
{
at91_gpio_suspend();
......
......@@ -9,6 +9,7 @@
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/pm.h>
#include <linux/of_address.h>
#include <asm/mach/map.h>
......@@ -51,6 +52,19 @@ void __init at91_init_interrupts(unsigned int *priority)
at91_gpio_irq_setup();
}
void __iomem *at91_ramc_base[2];
void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
{
if (id < 0 || id > 1) {
pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
BUG();
}
at91_ramc_base[id] = ioremap(addr, size);
if (!at91_ramc_base[id])
panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
}
static struct map_desc sram_desc[2] __initdata;
void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
......@@ -285,6 +299,150 @@ void __init at91_ioremap_matrix(u32 base_addr)
panic("Impossible to ioremap at91_matrix_base\n");
}
#if defined(CONFIG_OF)
static struct of_device_id rstc_ids[] = {
{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart },
{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
{ /*sentinel*/ }
};
static void at91_dt_rstc(void)
{
struct device_node *np;
const struct of_device_id *of_id;
np = of_find_matching_node(NULL, rstc_ids);
if (!np)
panic("unable to find compatible rstc node in dtb\n");
at91_rstc_base = of_iomap(np, 0);
if (!at91_rstc_base)
panic("unable to map rstc cpu registers\n");
of_id = of_match_node(rstc_ids, np);
if (!of_id)
panic("AT91: rtsc no restart function availlable\n");
arm_pm_restart = of_id->data;
of_node_put(np);
}
static struct of_device_id ramc_ids[] = {
{ .compatible = "atmel,at91sam9260-sdramc" },
{ .compatible = "atmel,at91sam9g45-ddramc" },
{ /*sentinel*/ }
};
static void at91_dt_ramc(void)
{
struct device_node *np;
np = of_find_matching_node(NULL, ramc_ids);
if (!np)
panic("unable to find compatible ram conroller node in dtb\n");
at91_ramc_base[0] = of_iomap(np, 0);
if (!at91_ramc_base[0])
panic("unable to map ramc[0] cpu registers\n");
/* the controller may have 2 banks */
at91_ramc_base[1] = of_iomap(np, 1);
of_node_put(np);
}
static struct of_device_id shdwc_ids[] = {
{ .compatible = "atmel,at91sam9260-shdwc", },
{ .compatible = "atmel,at91sam9rl-shdwc", },
{ .compatible = "atmel,at91sam9x5-shdwc", },
{ /*sentinel*/ }
};
static const char *shdwc_wakeup_modes[] = {
[AT91_SHDW_WKMODE0_NONE] = "none",
[AT91_SHDW_WKMODE0_HIGH] = "high",
[AT91_SHDW_WKMODE0_LOW] = "low",
[AT91_SHDW_WKMODE0_ANYLEVEL] = "any",
};
const int at91_dtget_shdwc_wakeup_mode(struct device_node *np)
{
const char *pm;
int err, i;
err = of_property_read_string(np, "atmel,wakeup-mode", &pm);
if (err < 0)
return AT91_SHDW_WKMODE0_ANYLEVEL;
for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++)
if (!strcasecmp(pm, shdwc_wakeup_modes[i]))
return i;
return -ENODEV;
}
static void at91_dt_shdwc(void)
{
struct device_node *np;
int wakeup_mode;
u32 reg;
u32 mode = 0;
np = of_find_matching_node(NULL, shdwc_ids);
if (!np) {
pr_debug("AT91: unable to find compatible shutdown (shdwc) conroller node in dtb\n");
return;
}
at91_shdwc_base = of_iomap(np, 0);
if (!at91_shdwc_base)
panic("AT91: unable to map shdwc cpu registers\n");
wakeup_mode = at91_dtget_shdwc_wakeup_mode(np);
if (wakeup_mode < 0) {
pr_warn("AT91: shdwc unknown wakeup mode\n");
goto end;
}
if (!of_property_read_u32(np, "atmel,wakeup-counter", &reg)) {
if (reg > AT91_SHDW_CPTWK0_MAX) {
pr_warn("AT91: shdwc wakeup conter 0x%x > 0x%x reduce it to 0x%x\n",
reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX);
reg = AT91_SHDW_CPTWK0_MAX;
}
mode |= AT91_SHDW_CPTWK0_(reg);
}
if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
mode |= AT91_SHDW_RTCWKEN;
if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
mode |= AT91_SHDW_RTTWKEN;
at91_shdwc_write(AT91_SHDW_MR, wakeup_mode | mode);
end:
pm_power_off = at91sam9_poweroff;
of_node_put(np);
}
void __init at91_dt_initialize(void)
{
at91_dt_rstc();
at91_dt_ramc();
at91_dt_shdwc();
/* Init clock subsystem */
at91_dt_clock_init();
/* Register the processor-specific clocks */
at91_boot_soc.register_clocks();
at91_boot_soc.init();
}
#endif
void __init at91_initialize(unsigned long main_clock)
{
at91_boot_soc.ioremap_registers();
......
......@@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_T5325) += t5325-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
/*
* Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
*
* arch/arm/mach-kirkwood/board-dreamplug.c
*
* Marvell DreamPlug Reference Board Init for drivers not converted to
* flattened device tree yet.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
#include <plat/mvsdio.h>
#include "common.h"
#include "mpp.h"
struct mtd_partition dreamplug_partitions[] = {
{
.name = "u-boot",
.size = SZ_512K,
.offset = 0,
},
{
.name = "u-boot env",
.size = SZ_64K,
.offset = SZ_512K + SZ_512K,
},
{
.name = "dtb",
.size = SZ_64K,
.offset = SZ_512K + SZ_512K + SZ_512K,
},
};
static const struct flash_platform_data dreamplug_spi_slave_data = {
.type = "mx25l1606e",
.name = "spi_flash",
.parts = dreamplug_partitions,
.nr_parts = ARRAY_SIZE(dreamplug_partitions),
};
static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &dreamplug_spi_slave_data,
.irq = -1,
.max_speed_hz = 50000000,
.bus_num = 0,
.chip_select = 0,
},
};
static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(1),
};
static struct mv_sata_platform_data dreamplug_sata_data = {
.n_ports = 1,
};
static struct mvsdio_platform_data dreamplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
};
static struct gpio_led dreamplug_led_pins[] = {
{
.name = "dreamplug:blue:bluetooth",
.gpio = 47,
.active_low = 1,
},
{
.name = "dreamplug:green:wifi",
.gpio = 48,
.active_low = 1,
},
{
.name = "dreamplug:green:wifi_ap",
.gpio = 49,
.active_low = 1,
},
};
static struct gpio_led_platform_data dreamplug_led_data = {
.leds = dreamplug_led_pins,
.num_leds = ARRAY_SIZE(dreamplug_led_pins),
};
static struct platform_device dreamplug_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &dreamplug_led_data,
}
};
static unsigned int dreamplug_mpp_config[] __initdata = {
MPP0_SPI_SCn,
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
MPP47_GPIO, /* Bluetooth LED */
MPP48_GPIO, /* Wifi LED */
MPP49_GPIO, /* Wifi AP LED */
0
};
void __init dreamplug_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_mpp_conf(dreamplug_mpp_config);
spi_register_board_info(dreamplug_spi_slave_info,
ARRAY_SIZE(dreamplug_spi_slave_info));
kirkwood_spi_init();
kirkwood_ehci_init();
kirkwood_ge00_init(&dreamplug_ge00_data);
kirkwood_ge01_init(&dreamplug_ge01_data);
kirkwood_sata_init(&dreamplug_sata_data);
kirkwood_sdio_init(&dreamplug_mvsdio_data);
platform_device_register(&dreamplug_leds);
}
......@@ -3,7 +3,7 @@
*
* arch/arm/mach-kirkwood/board-dt.c
*
* Marvell DreamPlug Reference Board Setup
* Flattened Device Tree board initialization
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
......@@ -12,150 +12,45 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <plat/mvsdio.h>
#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
#include "common.h"
#include "mpp.h"
static struct of_device_id kirkwood_dt_match_table[] __initdata = {
{ .compatible = "simple-bus", },
{ }
};
struct mtd_partition dreamplug_partitions[] = {
{
.name = "u-boot",
.size = SZ_512K,
.offset = 0,
},
{
.name = "u-boot env",
.size = SZ_64K,
.offset = SZ_512K + SZ_512K,
},
{
.name = "dtb",
.size = SZ_64K,
.offset = SZ_512K + SZ_512K + SZ_512K,
},
};
static const struct flash_platform_data dreamplug_spi_slave_data = {
.type = "mx25l1606e",
.name = "spi_flash",
.parts = dreamplug_partitions,
.nr_parts = ARRAY_SIZE(dreamplug_partitions),
};
static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &dreamplug_spi_slave_data,
.irq = -1,
.max_speed_hz = 50000000,
.bus_num = 0,
.chip_select = 0,
},
};
static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(1),
};
static struct mv_sata_platform_data dreamplug_sata_data = {
.n_ports = 1,
};
static struct mvsdio_platform_data dreamplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
};
static struct gpio_led dreamplug_led_pins[] = {
{
.name = "dreamplug:blue:bluetooth",
.gpio = 47,
.active_low = 1,
},
{
.name = "dreamplug:green:wifi",
.gpio = 48,
.active_low = 1,
},
{
.name = "dreamplug:green:wifi_ap",
.gpio = 49,
.active_low = 1,
},
};
static struct gpio_led_platform_data dreamplug_led_data = {
.leds = dreamplug_led_pins,
.num_leds = ARRAY_SIZE(dreamplug_led_pins),
};
static struct platform_device dreamplug_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &dreamplug_led_data,
}
};
static unsigned int dreamplug_mpp_config[] __initdata = {
MPP0_SPI_SCn,
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
MPP47_GPIO, /* Bluetooth LED */
MPP48_GPIO, /* Wifi LED */
MPP49_GPIO, /* Wifi AP LED */
0
};
static void __init dreamplug_init(void)
static void __init kirkwood_dt_init(void)
{
pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
/*
* Basic setup. Needs to be called early.
* Disable propagation of mbus errors to the CPU local bus,
* as this causes mbus errors (which can occur for example
* for PCI aborts) to throw CPU aborts, which we're not set
* up to deal with.
*/
kirkwood_mpp_conf(dreamplug_mpp_config);
writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
spi_register_board_info(dreamplug_spi_slave_info,
ARRAY_SIZE(dreamplug_spi_slave_info));
kirkwood_spi_init();
kirkwood_setup_cpu_mbus();
kirkwood_ehci_init();
kirkwood_ge00_init(&dreamplug_ge00_data);
kirkwood_ge01_init(&dreamplug_ge01_data);
kirkwood_sata_init(&dreamplug_sata_data);
kirkwood_sdio_init(&dreamplug_mvsdio_data);
#ifdef CONFIG_CACHE_FEROCEON_L2
kirkwood_l2_init();
#endif
platform_device_register(&dreamplug_leds);
}
/* internal devices that every board has */
kirkwood_wdt_init();
kirkwood_xor0_init();
kirkwood_xor1_init();
kirkwood_crypto_init();
static void __init kirkwood_dt_init(void)
{
kirkwood_init();
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
#endif
if (of_machine_is_compatible("globalscale,dreamplug"))
dreamplug_init();
......
......@@ -279,7 +279,7 @@ void __init kirkwood_crypto_init(void)
/*****************************************************************************
* XOR0
****************************************************************************/
static void __init kirkwood_xor0_init(void)
void __init kirkwood_xor0_init(void)
{
kirkwood_clk_ctrl |= CGC_XOR0;
......@@ -291,7 +291,7 @@ static void __init kirkwood_xor0_init(void)
/*****************************************************************************
* XOR1
****************************************************************************/
static void __init kirkwood_xor1_init(void)
void __init kirkwood_xor1_init(void)
{
kirkwood_clk_ctrl |= CGC_XOR1;
......@@ -303,7 +303,7 @@ static void __init kirkwood_xor1_init(void)
/*****************************************************************************
* Watchdog
****************************************************************************/
static void __init kirkwood_wdt_init(void)
void __init kirkwood_wdt_init(void)
{
orion_wdt_init(kirkwood_tclk);
}
......@@ -392,7 +392,7 @@ void __init kirkwood_audio_init(void)
/*
* Identify device ID and revision.
*/
static char * __init kirkwood_id(void)
char * __init kirkwood_id(void)
{
u32 dev, rev;
......@@ -435,7 +435,7 @@ static char * __init kirkwood_id(void)
}
}
static void __init kirkwood_l2_init(void)
void __init kirkwood_l2_init(void)
{
#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
......@@ -450,7 +450,6 @@ void __init kirkwood_init(void)
{
printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
kirkwood_id(), kirkwood_tclk);
kirkwood_i2s_data.tclk = kirkwood_tclk;
/*
* Disable propagation of mbus errors to the CPU local bus,
......
......@@ -51,6 +51,21 @@ void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev
void kirkwood_audio_init(void);
void kirkwood_restart(char, const char *);
/* board init functions for boards not fully converted to fdt */
#ifdef CONFIG_MACH_DREAMPLUG_DT
void dreamplug_init(void);
#else
static inline void dreamplug_init(void) {};
#endif
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
void kirkwood_wdt_init(void);
void kirkwood_xor0_init(void);
void kirkwood_xor1_init(void);
void kirkwood_crypto_init(void);
extern int kirkwood_tclk;
extern struct sys_timer kirkwood_timer;
......
......@@ -5,11 +5,12 @@
if ARCH_SPEAR6XX
menu "SPEAr6xx Implementations"
config BOARD_SPEAR600_EVB
bool "SPEAr600 Evaluation Board"
config BOARD_SPEAR600_DT
bool "SPEAr600 generic board configured via device-tree"
select MACH_SPEAR600
select USE_OF
help
Supports ST SPEAr600 Evaluation Board
Supports ST SPEAr600 boards configured via the device-tree
endmenu
......
......@@ -4,9 +4,3 @@
# common files
obj-y += clock.o spear6xx.o
# spear600 specific files
obj-$(CONFIG_MACH_SPEAR600) += spear600.o
# spear600 boards files
obj-$(CONFIG_BOARD_SPEAR600_EVB) += spear600_evb.o
......@@ -641,8 +641,8 @@ static struct clk_lookup spear_clk_lookups[] = {
{ .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
{ .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
{ .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk},
{ .dev_id = "uart0", .clk = &uart0_clk},
{ .dev_id = "uart1", .clk = &uart1_clk},
{ .dev_id = "d0000000.serial", .clk = &uart0_clk},
{ .dev_id = "d0080000.serial", .clk = &uart1_clk},
{ .dev_id = "firda", .clk = &firda_clk},
{ .dev_id = "clcd", .clk = &clcd_clk},
{ .dev_id = "gpt0", .clk = &gpt0_clk},
......@@ -655,20 +655,20 @@ static struct clk_lookup spear_clk_lookups[] = {
{ .con_id = "usbh.1_clk", .clk = &usbh1_clk},
/* clock derived from ahb clk */
{ .con_id = "apb_clk", .clk = &apb_clk},
{ .dev_id = "i2c_designware.0", .clk = &i2c_clk},
{ .dev_id = "d0200000.i2c", .clk = &i2c_clk},
{ .dev_id = "dma", .clk = &dma_clk},
{ .dev_id = "jpeg", .clk = &jpeg_clk},
{ .dev_id = "gmac", .clk = &gmac_clk},
{ .dev_id = "smi", .clk = &smi_clk},
{ .con_id = "fsmc", .clk = &fsmc_clk},
{ .dev_id = "fsmc-nand", .clk = &fsmc_clk},
/* clock derived from apb clk */
{ .dev_id = "adc", .clk = &adc_clk},
{ .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
{ .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
{ .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
{ .dev_id = "gpio0", .clk = &gpio0_clk},
{ .dev_id = "gpio1", .clk = &gpio1_clk},
{ .dev_id = "gpio2", .clk = &gpio2_clk},
{ .dev_id = "f0100000.gpio", .clk = &gpio0_clk},
{ .dev_id = "fc980000.gpio", .clk = &gpio1_clk},
{ .dev_id = "d8100000.gpio", .clk = &gpio2_clk},
};
void __init spear6xx_clk_init(void)
......
/*
* arch/arm/mach-spear6xx/spear600.c
*
* SPEAr600 machine source file
*
* Copyright (C) 2009 ST Microelectronics
* Rajeev Kumar<rajeev-dlh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/ptrace.h>
#include <asm/irq.h>
#include <mach/generic.h>
#include <mach/hardware.h>
/* Add spear600 specific devices here */
void __init spear600_init(void)
{
/* call spear6xx family common init function */
spear6xx_init();
}
/*
* arch/arm/mach-spear6xx/spear600_evb.c
*
* SPEAr600 evaluation board source file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
#include <mach/hardware.h>
static struct amba_device *amba_devs[] __initdata = {
&gpio_device[0],
&gpio_device[1],
&gpio_device[2],
&uart_device[0],
&uart_device[1],
};
static struct platform_device *plat_devs[] __initdata = {
};
static void __init spear600_evb_init(void)
{
unsigned int i;
/* call spear600 machine init function */
spear600_init();
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
/* Add Amba Devices */
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
amba_device_register(amba_devs[i], &iomem_resource);
}
MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
.atag_offset = 0x100,
.map_io = spear6xx_map_io,
.init_irq = spear6xx_init_irq,
.handle_irq = vic_handle_irq,
.timer = &spear6xx_timer,
.init_machine = spear600_evb_init,
.restart = spear_restart,
MACHINE_END
......@@ -6,111 +6,21 @@
* Copyright (C) 2009 ST Microelectronics
* Rajeev Kumar<rajeev-dlh.kumar@st.com>
*
* Copyright 2012 Stefan Roese <sr@denx.de>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/types.h>
#include <linux/amba/pl061.h>
#include <linux/ptrace.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/hardware/vic.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <mach/generic.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
/* Add spear6xx machines common devices here */
/* uart device registration */
struct amba_device uart_device[] = {
{
.dev = {
.init_name = "uart0",
},
.res = {
.start = SPEAR6XX_ICM1_UART0_BASE,
.end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_0},
}, {
.dev = {
.init_name = "uart1",
},
.res = {
.start = SPEAR6XX_ICM1_UART1_BASE,
.end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_1},
}
};
/* gpio device registration */
static struct pl061_platform_data gpio_plat_data[] = {
{
.gpio_base = 0,
.irq_base = SPEAR_GPIO0_INT_BASE,
}, {
.gpio_base = 8,
.irq_base = SPEAR_GPIO1_INT_BASE,
}, {
.gpio_base = 16,
.irq_base = SPEAR_GPIO2_INT_BASE,
},
};
struct amba_device gpio_device[] = {
{
.dev = {
.init_name = "gpio0",
.platform_data = &gpio_plat_data[0],
},
.res = {
.start = SPEAR6XX_CPU_GPIO_BASE,
.end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_LOCAL_GPIO},
}, {
.dev = {
.init_name = "gpio1",
.platform_data = &gpio_plat_data[1],
},
.res = {
.start = SPEAR6XX_ICM3_GPIO_BASE,
.end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_BASIC_GPIO},
}, {
.dev = {
.init_name = "gpio2",
.platform_data = &gpio_plat_data[2],
},
.res = {
.start = SPEAR6XX_ICM2_GPIO_BASE,
.end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_APPL_GPIO},
}
};
/* This will add devices, and do machine specific tasks */
void __init spear6xx_init(void)
{
/* nothing to do for now */
}
/* This will initialize vic */
void __init spear6xx_init_irq(void)
{
vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_PRI_BASE, 0, ~0, 0);
vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_SEC_BASE, 32, ~0, 0);
}
/* Following will create static virtual/physical mappings */
static struct map_desc spear6xx_io_desc[] __initdata = {
......@@ -181,3 +91,33 @@ static void __init spear6xx_timer_init(void)
struct sys_timer spear6xx_timer = {
.init = spear6xx_timer_init,
};
static void __init spear600_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *spear600_dt_board_compat[] = {
"st,spear600",
NULL
};
static const struct of_device_id vic_of_match[] __initconst = {
{ .compatible = "arm,pl190-vic", .data = vic_of_init, },
{ /* Sentinel */ }
};
static void __init spear6xx_dt_init_irq(void)
{
of_irq_init(vic_of_match);
}
DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)")
.map_io = spear6xx_map_io,
.init_irq = spear6xx_dt_init_irq,
.handle_irq = vic_handle_irq,
.timer = &spear6xx_timer,
.init_machine = spear600_dt_init,
.restart = spear_restart,
.dt_compat = spear600_dt_board_compat,
MACHINE_END
......@@ -58,6 +58,12 @@ config UX500_AUTO_PLATFORM
At least one platform needs to be selected in order to build
a working kernel. If everything else is disabled, this
automatically enables MACH_MOP500.
config MACH_UX500_DT
bool "Generic U8500 support using device tree"
depends on MACH_MOP500
select USE_OF
endmenu
config UX500_DEBUG_UART
......
......@@ -2,3 +2,4 @@
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb
......@@ -30,6 +30,9 @@
#include <linux/gpio_keys.h>
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -440,7 +443,7 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
};
#endif
static struct pl022_ssp_controller ssp0_platform_data = {
static struct pl022_ssp_controller ssp0_plat = {
.bus_id = 0,
#ifdef CONFIG_STE_DMA40
.enable_dma = 1,
......@@ -458,7 +461,7 @@ static struct pl022_ssp_controller ssp0_platform_data = {
static void __init mop500_spi_init(struct device *parent)
{
db8500_add_ssp0(parent, &ssp0_platform_data);
db8500_add_ssp0(parent, &ssp0_plat);
}
#ifdef CONFIG_STE_DMA40
......@@ -618,6 +621,7 @@ static void __init mop500_init_machine(void)
mop500_pins_init();
/* FIXME: parent of ab8500 should be prcmu */
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
......@@ -738,3 +742,94 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
.handle_irq = gic_handle_irq,
.init_machine = snowball_init_machine,
MACHINE_END
#ifdef CONFIG_MACH_UX500_DT
struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
{},
};
static const struct of_device_id u8500_soc_node[] = {
/* only create devices below soc node */
{ .compatible = "stericsson,db8500", },
{ },
};
static void __init u8500_init_machine(void)
{
struct device *parent = NULL;
int i2c0_devs;
int i;
parent = u8500_init_devices();
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
snowball_platform_devs[i]->dev.parent = parent;
/* automatically probe child nodes of db8500 device */
of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent);
if (of_machine_is_compatible("st-ericsson,mop500")) {
mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
mop500_pins_init();
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
mop500_sdi_init(parent);
} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
snowball_pins_init();
platform_add_devices(snowball_platform_devs,
ARRAY_SIZE(snowball_platform_devs));
snowball_sdi_init(parent);
} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
/*
* The HREFv60 board removed a GPIO expander and routed
* all these GPIO pins to the internal GPIO controller
* instead.
*/
mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
hrefv60_pins_init();
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
hrefv60_sdi_init(parent);
}
mop500_i2c_init(parent);
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
ARRAY_SIZE(mop500_i2c2_devices));
/* This board has full regulator constraints */
regulator_has_full_constraints();
}
static const char * u8500_dt_board_compat[] = {
"calaosystems,snowball-a9500",
"st-ericsson,hrefv60+",
"st-ericsson,u8500",
"st-ericsson,mop500",
NULL,
};
DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
.init_machine = u8500_init_machine,
.dt_compat = u8500_dt_board_compat,
MACHINE_END
#endif
......@@ -5,6 +5,8 @@
*/
#include <linux/io.h>
#include <linux/of.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <mach/hardware.h>
......@@ -45,6 +47,9 @@ static int __init ux500_l2x0_init(void)
ux500_l2x0_unlock();
/* 64KB way size, 8 way associativity, force WA */
if (of_have_populated_dt())
l2x0_of_init(0x3e060000, 0xc0000fff);
else
l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
/*
......
......@@ -16,6 +16,8 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
......@@ -28,6 +30,11 @@
void __iomem *_PRCMU_BASE;
static const struct of_device_id ux500_dt_irq_match[] = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
{},
};
void __init ux500_init_irq(void)
{
void __iomem *dist_base;
......@@ -42,6 +49,11 @@ void __init ux500_init_irq(void)
} else
ux500_unknown_soc();
#ifdef CONFIG_OF
if (of_have_populated_dt())
of_irq_init(ux500_dt_irq_match);
else
#endif
gic_init(0, 29, dist_base, cpu_base);
/*
......
......@@ -7,6 +7,7 @@
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/clksrc-dbx500-prcmu.h>
#include <linux/of.h>
#include <asm/smp_twd.h>
......@@ -30,9 +31,13 @@ static void __init ux500_twd_init(void)
twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer :
&u8500_twd_local_timer;
if (of_have_populated_dt())
twd_local_timer_of_register();
else {
err = twd_local_timer_register(twd_local_timer);
if (err)
pr_err("twd_local_timer_register failed %d\n", err);
}
}
#else
#define ux500_twd_init() do { } while(0)
......
......@@ -21,6 +21,7 @@
#include <plat/orion_wdt.h>
#include <plat/mv_xor.h>
#include <plat/ehci-orion.h>
#include <mach/bridge-regs.h>
/* Fill in the resources structure and link it into the platform
device structure. There is always a memory region, and nearly
......@@ -568,13 +569,17 @@ void __init orion_spi_1_init(unsigned long mapbase,
****************************************************************************/
static struct orion_wdt_platform_data orion_wdt_data;
static struct resource orion_wdt_resource =
DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
.id = -1,
.dev = {
.platform_data = &orion_wdt_data,
},
.num_resources = 0,
.resource = &orion_wdt_resource,
.num_resources = 1,
};
void __init orion_wdt_init(unsigned long tclk)
......
......@@ -2,7 +2,6 @@
#define __PLAT_AUDIO_H
struct kirkwood_asoc_platform_data {
u32 tclk;
int burst;
};
#endif
......@@ -97,6 +97,7 @@ static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
.rdy_pin = GPIO_PIN_PB(28),
.enable_pin = GPIO_PIN_PE(23),
.bus_width_16 = true,
.ecc_mode = NAND_ECC_SOFT,
.parts = nand_partitions,
.num_parts = ARRAY_SIZE(nand_partitions),
};
......
......@@ -95,6 +95,7 @@ static struct atmel_nand_data atstk1006_nand_data __initdata = {
.ale = 22,
.rdy_pin = GPIO_PIN_PB(30),
.enable_pin = GPIO_PIN_PB(29),
.ecc_mode = NAND_ECC_SOFT,
.parts = nand_partitions,
.num_parts = ARRAY_SIZE(num_partitions),
};
......
......@@ -7,6 +7,7 @@
#include <linux/types.h>
#include <linux/serial.h>
#include <linux/platform_data/macb.h>
#include <linux/platform_data/atmel_nand.h>
#define GPIO_PIN_NONE (-1)
......@@ -116,18 +117,6 @@ struct platform_device *
at32_add_device_cf(unsigned int id, unsigned int extint,
struct cf_platform_data *data);
/* NAND / SmartMedia */
struct atmel_nand_data {
int enable_pin; /* chip enable */
int det_pin; /* card detect */
int rdy_pin; /* ready/busy */
u8 rdy_pin_active_low; /* rdy_pin value is inverted */
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
struct mtd_partition *parts;
unsigned int num_parts;
};
struct platform_device *
at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
......
......@@ -14,8 +14,15 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <asm/gpio.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/of_i2c.h>
struct i2c_gpio_private_data {
struct i2c_adapter adap;
struct i2c_algo_bit_data bit_data;
struct i2c_gpio_platform_data pdata;
};
/* Toggle SDA by changing the direction of the pin */
static void i2c_gpio_setsda_dir(void *data, int state)
......@@ -78,24 +85,62 @@ static int i2c_gpio_getscl(void *data)
return gpio_get_value(pdata->scl_pin);
}
static int __devinit of_i2c_gpio_probe(struct device_node *np,
struct i2c_gpio_platform_data *pdata)
{
u32 reg;
if (of_gpio_count(np) < 2)
return -ENODEV;
pdata->sda_pin = of_get_gpio(np, 0);
pdata->scl_pin = of_get_gpio(np, 1);
if (!gpio_is_valid(pdata->sda_pin) || !gpio_is_valid(pdata->scl_pin)) {
pr_err("%s: invalid GPIO pins, sda=%d/scl=%d\n",
np->full_name, pdata->sda_pin, pdata->scl_pin);
return -ENODEV;
}
of_property_read_u32(np, "i2c-gpio,delay-us", &pdata->udelay);
if (!of_property_read_u32(np, "i2c-gpio,timeout-ms", &reg))
pdata->timeout = msecs_to_jiffies(reg);
pdata->sda_is_open_drain =
of_property_read_bool(np, "i2c-gpio,sda-open-drain");
pdata->scl_is_open_drain =
of_property_read_bool(np, "i2c-gpio,scl-open-drain");
pdata->scl_is_output_only =
of_property_read_bool(np, "i2c-gpio,scl-output-only");
return 0;
}
static int __devinit i2c_gpio_probe(struct platform_device *pdev)
{
struct i2c_gpio_private_data *priv;
struct i2c_gpio_platform_data *pdata;
struct i2c_algo_bit_data *bit_data;
struct i2c_adapter *adap;
int ret;
pdata = pdev->dev.platform_data;
if (!pdata)
return -ENXIO;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
adap = &priv->adap;
bit_data = &priv->bit_data;
pdata = &priv->pdata;
ret = -ENOMEM;
adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
if (!adap)
goto err_alloc_adap;
bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL);
if (!bit_data)
goto err_alloc_bit_data;
if (pdev->dev.of_node) {
ret = of_i2c_gpio_probe(pdev->dev.of_node, pdata);
if (ret)
return ret;
} else {
if (!pdev->dev.platform_data)
return -ENXIO;
memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
}
ret = gpio_request(pdata->sda_pin, "sda");
if (ret)
......@@ -143,6 +188,7 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev)
adap->algo_data = bit_data;
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
/*
* If "dev->id" is negative we consider it as zero.
......@@ -154,7 +200,9 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev)
if (ret)
goto err_add_bus;
platform_set_drvdata(pdev, adap);
of_i2c_register_devices(adap);
platform_set_drvdata(pdev, priv);
dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
pdata->sda_pin, pdata->scl_pin,
......@@ -168,34 +216,40 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev)
err_request_scl:
gpio_free(pdata->sda_pin);
err_request_sda:
kfree(bit_data);
err_alloc_bit_data:
kfree(adap);
err_alloc_adap:
return ret;
}
static int __devexit i2c_gpio_remove(struct platform_device *pdev)
{
struct i2c_gpio_private_data *priv;
struct i2c_gpio_platform_data *pdata;
struct i2c_adapter *adap;
adap = platform_get_drvdata(pdev);
pdata = pdev->dev.platform_data;
priv = platform_get_drvdata(pdev);
adap = &priv->adap;
pdata = &priv->pdata;
i2c_del_adapter(adap);
gpio_free(pdata->scl_pin);
gpio_free(pdata->sda_pin);
kfree(adap->algo_data);
kfree(adap);
return 0;
}
#if defined(CONFIG_OF)
static const struct of_device_id i2c_gpio_dt_ids[] = {
{ .compatible = "i2c-gpio", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, i2c_gpio_dt_ids);
#endif
static struct platform_driver i2c_gpio_driver = {
.driver = {
.name = "i2c-gpio",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(i2c_gpio_dt_ids),
},
.probe = i2c_gpio_probe,
.remove = __devexit_p(i2c_gpio_remove),
......
......@@ -27,6 +27,10 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/of_mtd.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
......@@ -34,22 +38,10 @@
#include <linux/dmaengine.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/platform_data/atmel.h>
#include <mach/board.h>
#include <mach/cpu.h>
#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
#define hard_ecc 1
#else
#define hard_ecc 0
#endif
#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
#define no_ecc 1
#else
#define no_ecc 0
#endif
static int use_dma = 1;
module_param(use_dma, int, 0);
......@@ -95,7 +87,7 @@ struct atmel_nand_host {
struct mtd_info mtd;
void __iomem *io_base;
dma_addr_t io_phys;
struct atmel_nand_data *board;
struct atmel_nand_data board;
struct device *dev;
void __iomem *ecc;
......@@ -113,8 +105,8 @@ static int cpu_has_dma(void)
*/
static void atmel_nand_enable(struct atmel_nand_host *host)
{
if (gpio_is_valid(host->board->enable_pin))
gpio_set_value(host->board->enable_pin, 0);
if (gpio_is_valid(host->board.enable_pin))
gpio_set_value(host->board.enable_pin, 0);
}
/*
......@@ -122,8 +114,8 @@ static void atmel_nand_enable(struct atmel_nand_host *host)
*/
static void atmel_nand_disable(struct atmel_nand_host *host)
{
if (gpio_is_valid(host->board->enable_pin))
gpio_set_value(host->board->enable_pin, 1);
if (gpio_is_valid(host->board.enable_pin))
gpio_set_value(host->board.enable_pin, 1);
}
/*
......@@ -144,9 +136,9 @@ static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl
return;
if (ctrl & NAND_CLE)
writeb(cmd, host->io_base + (1 << host->board->cle));
writeb(cmd, host->io_base + (1 << host->board.cle));
else
writeb(cmd, host->io_base + (1 << host->board->ale));
writeb(cmd, host->io_base + (1 << host->board.ale));
}
/*
......@@ -157,8 +149,8 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
struct nand_chip *nand_chip = mtd->priv;
struct atmel_nand_host *host = nand_chip->priv;
return gpio_get_value(host->board->rdy_pin) ^
!!host->board->rdy_pin_active_low;
return gpio_get_value(host->board.rdy_pin) ^
!!host->board.rdy_pin_active_low;
}
/*
......@@ -273,7 +265,7 @@ static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
return;
if (host->board->bus_width_16)
if (host->board.bus_width_16)
atmel_read_buf16(mtd, buf, len);
else
atmel_read_buf8(mtd, buf, len);
......@@ -289,7 +281,7 @@ static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
return;
if (host->board->bus_width_16)
if (host->board.bus_width_16)
atmel_write_buf16(mtd, buf, len);
else
atmel_write_buf8(mtd, buf, len);
......@@ -481,6 +473,56 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
}
}
#if defined(CONFIG_OF)
static int __devinit atmel_of_init_port(struct atmel_nand_host *host,
struct device_node *np)
{
u32 val;
int ecc_mode;
struct atmel_nand_data *board = &host->board;
enum of_gpio_flags flags;
if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
if (val >= 32) {
dev_err(host->dev, "invalid addr-offset %u\n", val);
return -EINVAL;
}
board->ale = val;
}
if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) {
if (val >= 32) {
dev_err(host->dev, "invalid cmd-offset %u\n", val);
return -EINVAL;
}
board->cle = val;
}
ecc_mode = of_get_nand_ecc_mode(np);
board->ecc_mode = ecc_mode < 0 ? NAND_ECC_SOFT : ecc_mode;
board->on_flash_bbt = of_get_nand_on_flash_bbt(np);
if (of_get_nand_bus_width(np) == 16)
board->bus_width_16 = 1;
board->rdy_pin = of_get_gpio_flags(np, 0, &flags);
board->rdy_pin_active_low = (flags == OF_GPIO_ACTIVE_LOW);
board->enable_pin = of_get_gpio(np, 1);
board->det_pin = of_get_gpio(np, 2);
return 0;
}
#else
static int __devinit atmel_of_init_port(struct atmel_nand_host *host,
struct device_node *np)
{
return -EINVAL;
}
#endif
/*
* Probe for the NAND device.
*/
......@@ -491,6 +533,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
struct nand_chip *nand_chip;
struct resource *regs;
struct resource *mem;
struct mtd_part_parser_data ppdata = {};
int res;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
......@@ -517,8 +560,15 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
mtd = &host->mtd;
nand_chip = &host->nand_chip;
host->board = pdev->dev.platform_data;
host->dev = &pdev->dev;
if (pdev->dev.of_node) {
res = atmel_of_init_port(host, pdev->dev.of_node);
if (res)
goto err_nand_ioremap;
} else {
memcpy(&host->board, pdev->dev.platform_data,
sizeof(struct atmel_nand_data));
}
nand_chip->priv = host; /* link the private data structures */
mtd->priv = nand_chip;
......@@ -529,26 +579,25 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
nand_chip->IO_ADDR_W = host->io_base;
nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
if (gpio_is_valid(host->board->rdy_pin))
if (gpio_is_valid(host->board.rdy_pin))
nand_chip->dev_ready = atmel_nand_device_ready;
nand_chip->ecc.mode = host->board.ecc_mode;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!regs && hard_ecc) {
if (!regs && nand_chip->ecc.mode == NAND_ECC_HW) {
printk(KERN_ERR "atmel_nand: can't get I/O resource "
"regs\nFalling back on software ECC\n");
nand_chip->ecc.mode = NAND_ECC_SOFT;
}
nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
if (no_ecc)
nand_chip->ecc.mode = NAND_ECC_NONE;
if (hard_ecc && regs) {
if (nand_chip->ecc.mode == NAND_ECC_HW) {
host->ecc = ioremap(regs->start, resource_size(regs));
if (host->ecc == NULL) {
printk(KERN_ERR "atmel_nand: ioremap failed\n");
res = -EIO;
goto err_ecc_ioremap;
}
nand_chip->ecc.mode = NAND_ECC_HW;
nand_chip->ecc.calculate = atmel_nand_calculate;
nand_chip->ecc.correct = atmel_nand_correct;
nand_chip->ecc.hwctl = atmel_nand_hwctl;
......@@ -558,7 +607,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
nand_chip->chip_delay = 20; /* 20us command delay time */
if (host->board->bus_width_16) /* 16-bit bus width */
if (host->board.bus_width_16) /* 16-bit bus width */
nand_chip->options |= NAND_BUSWIDTH_16;
nand_chip->read_buf = atmel_read_buf;
......@@ -567,15 +616,15 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, host);
atmel_nand_enable(host);
if (gpio_is_valid(host->board->det_pin)) {
if (gpio_get_value(host->board->det_pin)) {
if (gpio_is_valid(host->board.det_pin)) {
if (gpio_get_value(host->board.det_pin)) {
printk(KERN_INFO "No SmartMedia card inserted.\n");
res = -ENXIO;
goto err_no_card;
}
}
if (on_flash_bbt) {
if (host->board.on_flash_bbt || on_flash_bbt) {
printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
}
......@@ -650,8 +699,9 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
}
mtd->name = "atmel_nand";
res = mtd_device_parse_register(mtd, NULL, 0,
host->board->parts, host->board->num_parts);
ppdata.of_node = pdev->dev.of_node;
res = mtd_device_parse_register(mtd, NULL, &ppdata,
host->board.parts, host->board.num_parts);
if (!res)
return res;
......@@ -695,11 +745,21 @@ static int __exit atmel_nand_remove(struct platform_device *pdev)
return 0;
}
#if defined(CONFIG_OF)
static const struct of_device_id atmel_nand_dt_ids[] = {
{ .compatible = "atmel,at91rm9200-nand" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_nand_dt_ids);
#endif
static struct platform_driver atmel_nand_driver = {
.remove = __exit_p(atmel_nand_remove),
.driver = {
.name = "atmel_nand",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(atmel_nand_dt_ids),
},
};
......
......@@ -91,4 +91,8 @@ config OF_PCI_IRQ
help
OpenFirmware PCI IRQ routing helpers
config OF_MTD
depends on MTD
def_bool y
endmenu # OF
......@@ -12,3 +12,4 @@ obj-$(CONFIG_OF_SELFTEST) += selftest.o
obj-$(CONFIG_OF_MDIO) += of_mdio.o
obj-$(CONFIG_OF_PCI) += of_pci.o
obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
obj-$(CONFIG_OF_MTD) += of_mtd.o
/*
* Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* OF helpers for mtd.
*
* This file is released under the GPLv2
*
*/
#include <linux/kernel.h>
#include <linux/of_mtd.h>
#include <linux/mtd/nand.h>
#include <linux/export.h>
/**
* It maps 'enum nand_ecc_modes_t' found in include/linux/mtd/nand.h
* into the device tree binding of 'nand-ecc', so that MTD
* device driver can get nand ecc from device tree.
*/
static const char *nand_ecc_modes[] = {
[NAND_ECC_NONE] = "none",
[NAND_ECC_SOFT] = "soft",
[NAND_ECC_HW] = "hw",
[NAND_ECC_HW_SYNDROME] = "hw_syndrome",
[NAND_ECC_HW_OOB_FIRST] = "hw_oob_first",
[NAND_ECC_SOFT_BCH] = "soft_bch",
};
/**
* of_get_nand_ecc_mode - Get nand ecc mode for given device_node
* @np: Pointer to the given device_node
*
* The function gets ecc mode string from property 'nand-ecc-mode',
* and return its index in nand_ecc_modes table, or errno in error case.
*/
const int of_get_nand_ecc_mode(struct device_node *np)
{
const char *pm;
int err, i;
err = of_property_read_string(np, "nand-ecc-mode", &pm);
if (err < 0)
return err;
for (i = 0; i < ARRAY_SIZE(nand_ecc_modes); i++)
if (!strcasecmp(pm, nand_ecc_modes[i]))
return i;
return -ENODEV;
}
EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode);
/**
* of_get_nand_bus_width - Get nand bus witdh for given device_node
* @np: Pointer to the given device_node
*
* return bus width option, or errno in error case.
*/
int of_get_nand_bus_width(struct device_node *np)
{
u32 val;
if (of_property_read_u32(np, "nand-bus-width", &val))
return 8;
switch(val) {
case 8:
case 16:
return val;
default:
return -EIO;
}
}
EXPORT_SYMBOL_GPL(of_get_nand_bus_width);
/**
* of_get_nand_on_flash_bbt - Get nand on flash bbt for given device_node
* @np: Pointer to the given device_node
*
* return true if present false other wise
*/
bool of_get_nand_on_flash_bbt(struct device_node *np)
{
return of_property_read_bool(np, "nand-on-flash-bbt");
}
EXPORT_SYMBOL_GPL(of_get_nand_on_flash_bbt);
......@@ -12,6 +12,7 @@
#include <linux/bcd.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/delay.h>
#include <linux/gfp.h>
#include <linux/module.h>
......@@ -294,11 +295,19 @@ static int __exit mv_rtc_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_OF
static struct of_device_id rtc_mv_of_match_table[] = {
{ .compatible = "mrvl,orion-rtc", },
{}
};
#endif
static struct platform_driver mv_rtc_driver = {
.remove = __exit_p(mv_rtc_remove),
.driver = {
.name = "rtc-mv",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(rtc_mv_of_match_table),
},
};
......
......@@ -359,11 +359,6 @@ static int orion_spi_setup(struct spi_device *spi)
orion_spi = spi_master_get_devdata(spi->master);
/* Fix ac timing if required. */
if (orion_spi->spi_info->enable_clock_fix)
orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
(1 << 14));
if ((spi->max_speed_hz == 0)
|| (spi->max_speed_hz > orion_spi->max_speed))
spi->max_speed_hz = orion_spi->max_speed;
......
......@@ -2,4 +2,4 @@
# Makefile for the RMI4 touchscreen driver.
#
obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += synaptics_i2c_rmi4.o
obj-$(CONFIG_MACH_U8500) += board-mop500-u8500uib-rmi4.o
obj-$(CONFIG_MACH_MOP500) += board-mop500-u8500uib-rmi4.o
......@@ -44,7 +44,7 @@ config USB_ARCH_HAS_EHCI
default y if PPC_MPC512x
default y if ARCH_IXP4XX
default y if ARCH_W90X900
default y if ARCH_AT91SAM9G45
default y if ARCH_AT91
default y if ARCH_MXC
default y if ARCH_OMAP3
default y if ARCH_CNS3XXX
......
......@@ -137,7 +137,7 @@ choice
config USB_AT91
tristate "Atmel AT91 USB Device Port"
depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91SAM9G45
depends on ARCH_AT91
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
full speed USB Device Port with support for five configurable
......
......@@ -29,6 +29,8 @@
#include <linux/clk.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <asm/byteorder.h>
#include <mach/hardware.h>
......@@ -1707,7 +1709,27 @@ static void at91udc_shutdown(struct platform_device *dev)
spin_unlock_irqrestore(&udc->lock, flags);
}
static int __init at91udc_probe(struct platform_device *pdev)
static void __devinit at91udc_of_init(struct at91_udc *udc,
struct device_node *np)
{
struct at91_udc_data *board = &udc->board;
u32 val;
enum of_gpio_flags flags;
if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0)
board->vbus_polled = 1;
board->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0,
&flags);
board->vbus_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
board->pullup_pin = of_get_named_gpio_flags(np, "atmel,pullup-gpio", 0,
&flags);
board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
}
static int __devinit at91udc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct at91_udc *udc;
......@@ -1742,7 +1764,11 @@ static int __init at91udc_probe(struct platform_device *pdev)
/* init software state */
udc = &controller;
udc->gadget.dev.parent = dev;
udc->board = *(struct at91_udc_data *) dev->platform_data;
if (pdev->dev.of_node)
at91udc_of_init(udc, pdev->dev.of_node);
else
memcpy(&udc->board, dev->platform_data,
sizeof(struct at91_udc_data));
udc->pdev = pdev;
udc->enabled = 0;
spin_lock_init(&udc->lock);
......@@ -1971,6 +1997,15 @@ static int at91udc_resume(struct platform_device *pdev)
#define at91udc_resume NULL
#endif
#if defined(CONFIG_OF)
static const struct of_device_id at91_udc_dt_ids[] = {
{ .compatible = "atmel,at91rm9200-udc" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, at91_udc_dt_ids);
#endif
static struct platform_driver at91_udc_driver = {
.remove = __exit_p(at91udc_remove),
.shutdown = at91udc_shutdown,
......@@ -1979,6 +2014,7 @@ static struct platform_driver at91_udc_driver = {
.driver = {
.name = (char *) driver_name,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(at91_udc_dt_ids),
},
};
......
......@@ -13,6 +13,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/of_platform.h>
/* interface and function clocks */
static struct clk *iclk, *fclk;
......@@ -115,6 +116,8 @@ static const struct hc_driver ehci_atmel_hc_driver = {
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
......@@ -137,6 +140,13 @@ static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
goto fail_create_hcd;
}
/* Right now device-tree probed devices don't get dma_mask set.
* Since shared usb code relies on it, set it here for now.
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &at91_ehci_dma_mask;
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
retval = -ENOMEM;
......@@ -225,9 +235,21 @@ static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id atmel_ehci_dt_ids[] = {
{ .compatible = "atmel,at91sam9g45-ehci" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids);
#endif
static struct platform_driver ehci_atmel_driver = {
.probe = ehci_atmel_drv_probe,
.remove = __devexit_p(ehci_atmel_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
.driver.name = "atmel-ehci",
.driver = {
.name = "atmel-ehci",
.of_match_table = of_match_ptr(atmel_ehci_dt_ids),
},
};
......@@ -14,6 +14,8 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <mach/hardware.h>
#include <asm/gpio.h>
......@@ -477,13 +479,109 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
return IRQ_HANDLED;
}
#ifdef CONFIG_OF
static const struct of_device_id at91_ohci_dt_ids[] = {
{ .compatible = "atmel,at91rm9200-ohci" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
static int __devinit ohci_at91_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
int i, ret, gpio;
enum of_gpio_flags flags;
struct at91_usbh_data *pdata;
u32 ports;
if (!np)
return 0;
/* Right now device-tree probed devices don't get dma_mask set.
* Since shared usb code relies on it, set it here for now.
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &at91_ohci_dma_mask;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
if (!of_property_read_u32(np, "num-ports", &ports))
pdata->ports = ports;
for (i = 0; i < 2; i++) {
gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, &flags);
pdata->vbus_pin[i] = gpio;
if (!gpio_is_valid(gpio))
continue;
pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW;
ret = gpio_request(gpio, "ohci_vbus");
if (ret) {
dev_warn(&pdev->dev, "can't request vbus gpio %d", gpio);
continue;
}
ret = gpio_direction_output(gpio, !(flags & OF_GPIO_ACTIVE_LOW) ^ 1);
if (ret)
dev_warn(&pdev->dev, "can't put vbus gpio %d as output %d",
!(flags & OF_GPIO_ACTIVE_LOW) ^ 1, gpio);
}
for (i = 0; i < 2; i++) {
gpio = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags);
pdata->overcurrent_pin[i] = gpio;
if (!gpio_is_valid(gpio))
continue;
ret = gpio_request(gpio, "ohci_overcurrent");
if (ret) {
dev_err(&pdev->dev, "can't request overcurrent gpio %d", gpio);
continue;
}
ret = gpio_direction_input(gpio);
if (ret) {
dev_err(&pdev->dev, "can't configure overcurrent gpio %d as input", gpio);
continue;
}
ret = request_irq(gpio_to_irq(gpio),
ohci_hcd_at91_overcurrent_irq,
IRQF_SHARED, "ohci_overcurrent", pdev);
if (ret) {
gpio_free(gpio);
dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n");
}
}
pdev->dev.platform_data = pdata;
return 0;
}
#else
static int __devinit ohci_at91_of_init(struct platform_device *pdev)
{
return 0;
}
#endif
/*-------------------------------------------------------------------------*/
static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
struct at91_usbh_data *pdata = pdev->dev.platform_data;
struct at91_usbh_data *pdata;
int i;
i = ohci_at91_of_init(pdev);
if (i)
return i;
pdata = pdev->dev.platform_data;
if (pdata) {
for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (!gpio_is_valid(pdata->vbus_pin[i]))
......@@ -596,5 +694,6 @@ static struct platform_driver ohci_hcd_at91_driver = {
.driver = {
.name = "at91_ohci",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(at91_ohci_dt_ids),
},
};
......@@ -28,9 +28,9 @@
/*
* Watchdog timer block registers.
*/
#define TIMER_CTRL (TIMER_VIRT_BASE + 0x0000)
#define TIMER_CTRL 0x0000
#define WDT_EN 0x0010
#define WDT_VAL (TIMER_VIRT_BASE + 0x0024)
#define WDT_VAL 0x0024
#define WDT_MAX_CYCLE_COUNT 0xffffffff
#define WDT_IN_USE 0
......@@ -40,6 +40,7 @@ static int nowayout = WATCHDOG_NOWAYOUT;
static int heartbeat = -1; /* module parameter (seconds) */
static unsigned int wdt_max_duration; /* (seconds) */
static unsigned int wdt_tclk;
static void __iomem *wdt_reg;
static unsigned long wdt_status;
static DEFINE_SPINLOCK(wdt_lock);
......@@ -48,7 +49,7 @@ static void orion_wdt_ping(void)
spin_lock(&wdt_lock);
/* Reload watchdog duration */
writel(wdt_tclk * heartbeat, WDT_VAL);
writel(wdt_tclk * heartbeat, wdt_reg + WDT_VAL);
spin_unlock(&wdt_lock);
}
......@@ -60,7 +61,7 @@ static void orion_wdt_enable(void)
spin_lock(&wdt_lock);
/* Set watchdog duration */
writel(wdt_tclk * heartbeat, WDT_VAL);
writel(wdt_tclk * heartbeat, wdt_reg + WDT_VAL);
/* Clear watchdog timer interrupt */
reg = readl(BRIDGE_CAUSE);
......@@ -68,9 +69,9 @@ static void orion_wdt_enable(void)
writel(reg, BRIDGE_CAUSE);
/* Enable watchdog timer */
reg = readl(TIMER_CTRL);
reg = readl(wdt_reg + TIMER_CTRL);
reg |= WDT_EN;
writel(reg, TIMER_CTRL);
writel(reg, wdt_reg + TIMER_CTRL);
/* Enable reset on watchdog */
reg = readl(RSTOUTn_MASK);
......@@ -92,9 +93,9 @@ static void orion_wdt_disable(void)
writel(reg, RSTOUTn_MASK);
/* Disable watchdog timer */
reg = readl(TIMER_CTRL);
reg = readl(wdt_reg + TIMER_CTRL);
reg &= ~WDT_EN;
writel(reg, TIMER_CTRL);
writel(reg, wdt_reg + TIMER_CTRL);
spin_unlock(&wdt_lock);
}
......@@ -102,7 +103,7 @@ static void orion_wdt_disable(void)
static int orion_wdt_get_timeleft(int *time_left)
{
spin_lock(&wdt_lock);
*time_left = readl(WDT_VAL) / wdt_tclk;
*time_left = readl(wdt_reg + WDT_VAL) / wdt_tclk;
spin_unlock(&wdt_lock);
return 0;
}
......@@ -236,6 +237,7 @@ static struct miscdevice orion_wdt_miscdev = {
static int __devinit orion_wdt_probe(struct platform_device *pdev)
{
struct orion_wdt_platform_data *pdata = pdev->dev.platform_data;
struct resource *res;
int ret;
if (pdata) {
......@@ -245,6 +247,10 @@ static int __devinit orion_wdt_probe(struct platform_device *pdev)
return -ENODEV;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
wdt_reg = ioremap(res->start, resource_size(res));
if (orion_wdt_miscdev.parent)
return -EBUSY;
orion_wdt_miscdev.parent = &pdev->dev;
......
......@@ -361,6 +361,22 @@ static inline int of_machine_is_compatible(const char *compat)
#define of_match_node(_matches, _node) NULL
#endif /* CONFIG_OF */
/**
* of_property_read_bool - Findfrom a property
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
*
* Search for a property in a device node.
* Returns true if the property exist false otherwise.
*/
static inline bool of_property_read_bool(const struct device_node *np,
const char *propname)
{
struct property *prop = of_find_property(np, propname, NULL);
return prop ? true : false;
}
static inline int of_property_read_u32(const struct device_node *np,
const char *propname,
u32 *out_value)
......
/*
* Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* OF helpers for mtd.
*
* This file is released under the GPLv2
*/
#ifndef __LINUX_OF_MTD_H
#define __LINUX_OF_NET_H
#ifdef CONFIG_OF_MTD
#include <linux/of.h>
extern const int of_get_nand_ecc_mode(struct device_node *np);
int of_get_nand_bus_width(struct device_node *np);
bool of_get_nand_on_flash_bbt(struct device_node *np);
#endif
#endif /* __LINUX_OF_MTD_H */
/*
* atmel platform data
*
* GPL v2 Only
*/
#ifndef __ATMEL_NAND_H__
#define __ATMEL_NAND_H__
#include <linux/mtd/nand.h>
/* NAND / SmartMedia */
struct atmel_nand_data {
int enable_pin; /* chip enable */
int det_pin; /* card detect */
int rdy_pin; /* ready/busy */
u8 rdy_pin_active_low; /* rdy_pin value is inverted */
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
u8 ecc_mode; /* ecc mode */
u8 on_flash_bbt; /* bbt on flash */
struct mtd_partition *parts;
unsigned int num_parts;
};
#endif /* __ATMEL_NAND_H__ */
......@@ -11,7 +11,6 @@
struct orion_spi_info {
u32 tclk; /* no <linux/clk.h> support yet */
u32 enable_clock_fix;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment