Commit 0aed4b28 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "A few new drivers:

   - driver for Azoteq IQS550/572/525 touch controllers

   - driver for Microchip AT42QT1050 keys

   - driver for GPIO controllable vibrators

   - support for GT5663 in Goodix driver

  ... along with miscellaneous driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: libps2 - mark expected switch fall-through
  Input: qt1050 - add Microchip AT42QT1050 support
  Input: add support for Azoteq IQS550/572/525
  Input: add a driver for GPIO controllable vibrators
  Input: synaptics-rmi4 - fix enum_fmt
  Input: synaptics-rmi4 - fill initial format
  HID: input: add mapping for KEY_KBD_LAYOUT_NEXT
  Input: add KEY_KBD_LAYOUT_NEXT
  Input: hyperv-keyboard - add module description
  Input: olpc_apsp - depend on ARCH_MMP
  Input: sun4i-a10-lradc-keys - add support for A83T
  Input: snvs_pwrkey - use dev_pm_set_wake_irq() to simplify code
  Input: lpc32xx-key - add clocks property and fix DT binding example
  Input: i8042 - signal wakeup from atkbd/psmouse
  Input: goodix - add GT5663 CTP support
  Input: goodix - add regulators suppot
  Input: evdev - use struct_size() in kzalloc() and vzalloc()
  Input: edt-ft5x06 - convert to use SPDX identifier
  Input: edt-ft5x06 - enable ACPI enumeration
parents a3958f5e 14e0c731
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/bindings/input/gpio-vibrator.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: GPIO vibrator
maintainers:
- Luca Weiss <luca@z3ntu.xyz>
description: |+
Registers a GPIO device as vibrator, where the on/off capability is controlled by a GPIO.
properties:
compatible:
const: gpio-vibrator
enable-gpios:
maxItems: 1
vcc-supply:
description: Regulator that provides power
required:
- compatible
- enable-gpios
examples:
- |
#include <dt-bindings/gpio/gpio.h>
vibrator {
compatible = "gpio-vibrator";
enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
vcc-supply = <&pm8941_l18>;
};
......@@ -8,6 +8,7 @@ Required Properties:
- reg: Physical base address of the controller and length of memory mapped
region.
- interrupts: The interrupt number to the cpu.
- clocks: phandle to clock controller plus clock-specifier pair
- nxp,debounce-delay-ms: Debounce delay in ms
- nxp,scan-delay-ms: Repeated scan period in ms
- linux,keymap: the key-code to be reported when the key is pressed
......@@ -22,7 +23,9 @@ Example:
key@40050000 {
compatible = "nxp,lpc3220-key";
reg = <0x40050000 0x1000>;
interrupts = <54 0>;
clocks = <&clk LPC32XX_CLK_KEY>;
interrupt-parent = <&sic1>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
keypad,num-rows = <1>;
keypad,num-columns = <1>;
nxp,debounce-delay-ms = <3>;
......
Microchip AT42QT1050 Five-channel Touch Sensor IC
The AT42QT1050 (QT1050) is a QTouchADC sensor device. The device can sense from
one to five keys, dependent on mode. The QT1050 includes all signal processing
functions necessary to provide stable sensing under a wide variety of changing
conditions, and the outputs are fully debounced.
The touchkey device node should be placed inside an I2C bus node.
Required properties:
- compatible: Must be "microchip,qt1050"
- reg: The I2C address of the device
- interrupts: The sink for the touchpad's IRQ output,
see ../interrupt-controller/interrupts.txt
Optional properties:
- wakeup-source: touch keys can be used as a wakeup source
Each button (key) is represented as a sub-node:
Each not specified key or key with linux,code set to KEY_RESERVED gets disabled
in HW.
Subnode properties:
- linux,code: Keycode to emit.
- reg: The key number. Valid values: 0, 1, 2, 3, 4.
Optional subnode-properties:
If a optional property is missing or has a invalid value the default value is
taken.
- microchip,pre-charge-time-ns:
Each touchpad need some time to precharge. The value depends on the mechanical
layout.
Valid value range: 0 - 637500; values must be a multiple of 2500;
default is 0.
- microchip,average-samples:
Number of data samples which are averaged for each read.
Valid values: 1, 4, 16, 64, 256, 1024, 4096, 16384; default is 1.
- microchip,average-scaling:
The scaling factor which is used to scale the average-samples.
Valid values: 1, 2, 4, 8, 16, 32, 64, 128; default is 1.
- microchip,threshold:
Number of counts to register a touch detection.
Valid value range: 0 - 255; default is 20.
Example:
QT1050 with 3 non continuous keys, key2 and key4 are disabled.
touchkeys@41 {
compatible = "microchip,qt1050";
reg = <0x41>;
interrupt-parent = <&gpio0>;
interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
up@0 {
reg = <0>;
linux,code = <KEY_UP>;
microchip,average-samples = <64>;
microchip,average-scaling = <16>;
microchip,pre-charge-time-ns = <10000>;
};
right@1 {
reg = <1>;
linux,code = <KEY_RIGHT>;
microchip,average-samples = <64>;
microchip,average-scaling = <8>;
};
down@3 {
reg = <3>;
linux,code = <KEY_DOWN>;
microchip,average-samples = <256>;
microchip,average-scaling = <16>;
};
};
......@@ -2,12 +2,14 @@ Allwinner sun4i low res adc attached tablet keys
------------------------------------------------
Required properties:
- compatible: "allwinner,sun4i-a10-lradc-keys"
- compatible: should be one of the following string:
"allwinner,sun4i-a10-lradc-keys"
"allwinner,sun8i-a83t-r-lradc"
- reg: mmio address range of the chip
- interrupts: interrupt to which the chip is connected
- vref-supply: powersupply for the lradc reference voltage
Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys":
Each key is represented as a sub-node of the compatible mentioned above:
Required subnode-properties:
- label: Descriptive name of the key.
......
......@@ -3,6 +3,7 @@ Device tree bindings for Goodix GT9xx series touchscreen controller
Required properties:
- compatible : Should be "goodix,gt1151"
or "goodix,gt5663"
or "goodix,gt5688"
or "goodix,gt911"
or "goodix,gt9110"
......@@ -19,6 +20,8 @@ Optional properties:
- irq-gpios : GPIO pin used for IRQ. The driver uses the
interrupt gpio pin as output to reset the device.
- reset-gpios : GPIO pin used for reset
- AVDD28-supply : Analog power supply regulator on AVDD28 pin
- VDDIO-supply : GPIO power supply regulator on VDDIO pin
- touchscreen-inverted-x
- touchscreen-inverted-y
- touchscreen-size-x
......
Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
Required properties:
- compatible : Must be equal to one of the following:
"azoteq,iqs550"
"azoteq,iqs572"
"azoteq,iqs525"
- reg : I2C slave address for the device.
- interrupts : GPIO to which the device's active-high RDY
output is connected (see [0]).
- reset-gpios : GPIO to which the device's active-low NRST
input is connected (see [1]).
Optional properties:
- touchscreen-min-x : See [2].
- touchscreen-min-y : See [2].
- touchscreen-size-x : See [2]. If this property is omitted, the
maximum x-coordinate is specified by the
device's "X Resolution" register.
- touchscreen-size-y : See [2]. If this property is omitted, the
maximum y-coordinate is specified by the
device's "Y Resolution" register.
- touchscreen-max-pressure : See [2]. Pressure is expressed as the sum of
the deltas across all channels impacted by a
touch event. A channel's delta is calculated
as its count value minus a reference, where
the count value is inversely proportional to
the channel's capacitance.
- touchscreen-fuzz-x : See [2].
- touchscreen-fuzz-y : See [2].
- touchscreen-fuzz-pressure : See [2].
- touchscreen-inverted-x : See [2]. Inversion is applied relative to that
which may already be specified by the device's
FLIP_X and FLIP_Y register fields.
- touchscreen-inverted-y : See [2]. Inversion is applied relative to that
which may already be specified by the device's
FLIP_X and FLIP_Y register fields.
- touchscreen-swapped-x-y : See [2]. Swapping is applied relative to that
which may already be specified by the device's
SWITCH_XY_AXIS register field.
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
[1]: Documentation/devicetree/bindings/gpio/gpio.txt
[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
Example:
&i2c1 {
/* ... */
touchscreen@74 {
compatible = "azoteq,iqs550";
reg = <0x74>;
interrupt-parent = <&gpio>;
interrupts = <17 4>;
reset-gpios = <&gpio 27 1>;
touchscreen-size-x = <640>;
touchscreen-size-y = <480>;
touchscreen-max-pressure = <16000>;
};
/* ... */
};
......@@ -55,6 +55,7 @@ avic Shanghai AVIC Optoelectronics Co., Ltd.
avnet Avnet, Inc.
axentia Axentia Technologies AB
axis Axis Communications AB
azoteq Azoteq (Pty) Ltd
bananapi BIPAI KEJI LIMITED
bhf Beckhoff Automation GmbH & Co. KG
bitmain Bitmain Technologies
......
......@@ -1051,6 +1051,8 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
case 0x28b: map_key_clear(KEY_FORWARDMAIL); break;
case 0x28c: map_key_clear(KEY_SEND); break;
case 0x29d: map_key_clear(KEY_KBD_LAYOUT_NEXT); break;
case 0x2c7: map_key_clear(KEY_KBDINPUTASSIST_PREV); break;
case 0x2c8: map_key_clear(KEY_KBDINPUTASSIST_NEXT); break;
case 0x2c9: map_key_clear(KEY_KBDINPUTASSIST_PREVGROUP); break;
......
......@@ -503,14 +503,13 @@ static int evdev_open(struct inode *inode, struct file *file)
{
struct evdev *evdev = container_of(inode->i_cdev, struct evdev, cdev);
unsigned int bufsize = evdev_compute_buffer_size(evdev->handle.dev);
unsigned int size = sizeof(struct evdev_client) +
bufsize * sizeof(struct input_event);
struct evdev_client *client;
int error;
client = kzalloc(size, GFP_KERNEL | __GFP_NOWARN);
client = kzalloc(struct_size(client, buffer, bufsize),
GFP_KERNEL | __GFP_NOWARN);
if (!client)
client = vzalloc(size);
client = vzalloc(struct_size(client, buffer, bufsize));
if (!client)
return -ENOMEM;
......
......@@ -137,6 +137,17 @@ config KEYBOARD_ATKBD_RDI_KEYCODES
right-hand column will be interpreted as the key shown in the
left-hand column.
config KEYBOARD_QT1050
tristate "Microchip AT42QT1050 Touch Sensor Chip"
depends on I2C
select REGMAP_I2C
help
Say Y here if you want to use Microchip AT42QT1050 QTouch
Sensor chip as input device.
To compile this driver as a module, choose M here:
the module will be called qt1050
config KEYBOARD_QT1070
tristate "Atmel AT42QT1070 Touch Sensor Chip"
depends on I2C
......
......@@ -50,6 +50,7 @@ obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o
obj-$(CONFIG_KEYBOARD_PMIC8XXX) += pmic8xxx-keypad.o
obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
obj-$(CONFIG_KEYBOARD_QT1050) += qt1050.o
obj-$(CONFIG_KEYBOARD_QT1070) += qt1070.o
obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o
......
......@@ -401,6 +401,8 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
if (ps2_handle_response(&atkbd->ps2dev, data))
goto out;
pm_wakeup_event(&serio->dev, 0);
if (!atkbd->enabled)
goto out;
......
// SPDX-License-Identifier: GPL-2.0
/*
* Microchip AT42QT1050 QTouch Sensor Controller
*
* Copyright (C) 2019 Pengutronix, Marco Felsch <kernel@pengutronix.de>
*
* Base on AT42QT1070 driver by:
* Bo Shen <voice.shen@atmel.com>
* Copyright (C) 2011 Atmel
*/
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/log2.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
/* Chip ID */
#define QT1050_CHIP_ID 0x00
#define QT1050_CHIP_ID_VER 0x46
/* Firmware version */
#define QT1050_FW_VERSION 0x01
/* Detection status */
#define QT1050_DET_STATUS 0x02
/* Key status */
#define QT1050_KEY_STATUS 0x03
/* Key Signals */
#define QT1050_KEY_SIGNAL_0_MSB 0x06
#define QT1050_KEY_SIGNAL_0_LSB 0x07
#define QT1050_KEY_SIGNAL_1_MSB 0x08
#define QT1050_KEY_SIGNAL_1_LSB 0x09
#define QT1050_KEY_SIGNAL_2_MSB 0x0c
#define QT1050_KEY_SIGNAL_2_LSB 0x0d
#define QT1050_KEY_SIGNAL_3_MSB 0x0e
#define QT1050_KEY_SIGNAL_3_LSB 0x0f
#define QT1050_KEY_SIGNAL_4_MSB 0x10
#define QT1050_KEY_SIGNAL_4_LSB 0x11
/* Reference data */
#define QT1050_REF_DATA_0_MSB 0x14
#define QT1050_REF_DATA_0_LSB 0x15
#define QT1050_REF_DATA_1_MSB 0x16
#define QT1050_REF_DATA_1_LSB 0x17
#define QT1050_REF_DATA_2_MSB 0x1a
#define QT1050_REF_DATA_2_LSB 0x1b
#define QT1050_REF_DATA_3_MSB 0x1c
#define QT1050_REF_DATA_3_LSB 0x1d
#define QT1050_REF_DATA_4_MSB 0x1e
#define QT1050_REF_DATA_4_LSB 0x1f
/* Negative threshold level */
#define QT1050_NTHR_0 0x21
#define QT1050_NTHR_1 0x22
#define QT1050_NTHR_2 0x24
#define QT1050_NTHR_3 0x25
#define QT1050_NTHR_4 0x26
/* Pulse / Scale */
#define QT1050_PULSE_SCALE_0 0x28
#define QT1050_PULSE_SCALE_1 0x29
#define QT1050_PULSE_SCALE_2 0x2b
#define QT1050_PULSE_SCALE_3 0x2c
#define QT1050_PULSE_SCALE_4 0x2d
/* Detection integrator counter / AKS */
#define QT1050_DI_AKS_0 0x2f
#define QT1050_DI_AKS_1 0x30
#define QT1050_DI_AKS_2 0x32
#define QT1050_DI_AKS_3 0x33
#define QT1050_DI_AKS_4 0x34
/* Charge Share Delay */
#define QT1050_CSD_0 0x36
#define QT1050_CSD_1 0x37
#define QT1050_CSD_2 0x39
#define QT1050_CSD_3 0x3a
#define QT1050_CSD_4 0x3b
/* Low Power Mode */
#define QT1050_LPMODE 0x3d
/* Calibration and Reset */
#define QT1050_RES_CAL 0x3f
#define QT1050_RES_CAL_RESET BIT(7)
#define QT1050_RES_CAL_CALIBRATE BIT(1)
#define QT1050_MAX_KEYS 5
#define QT1050_RESET_TIME 255
struct qt1050_key_regs {
unsigned int nthr;
unsigned int pulse_scale;
unsigned int di_aks;
unsigned int csd;
};
struct qt1050_key {
u32 num;
u32 charge_delay;
u32 thr_cnt;
u32 samples;
u32 scale;
u32 keycode;
};
struct qt1050_priv {
struct i2c_client *client;
struct input_dev *input;
struct regmap *regmap;
struct qt1050_key keys[QT1050_MAX_KEYS];
unsigned short keycodes[QT1050_MAX_KEYS];
u8 reg_keys;
u8 last_keys;
};
static const struct qt1050_key_regs qt1050_key_regs_data[] = {
{
.nthr = QT1050_NTHR_0,
.pulse_scale = QT1050_PULSE_SCALE_0,
.di_aks = QT1050_DI_AKS_0,
.csd = QT1050_CSD_0,
}, {
.nthr = QT1050_NTHR_1,
.pulse_scale = QT1050_PULSE_SCALE_1,
.di_aks = QT1050_DI_AKS_1,
.csd = QT1050_CSD_1,
}, {
.nthr = QT1050_NTHR_2,
.pulse_scale = QT1050_PULSE_SCALE_2,
.di_aks = QT1050_DI_AKS_2,
.csd = QT1050_CSD_2,
}, {
.nthr = QT1050_NTHR_3,
.pulse_scale = QT1050_PULSE_SCALE_3,
.di_aks = QT1050_DI_AKS_3,
.csd = QT1050_CSD_3,
}, {
.nthr = QT1050_NTHR_4,
.pulse_scale = QT1050_PULSE_SCALE_4,
.di_aks = QT1050_DI_AKS_4,
.csd = QT1050_CSD_4,
}
};
static bool qt1050_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case QT1050_DET_STATUS:
case QT1050_KEY_STATUS:
case QT1050_KEY_SIGNAL_0_MSB:
case QT1050_KEY_SIGNAL_0_LSB:
case QT1050_KEY_SIGNAL_1_MSB:
case QT1050_KEY_SIGNAL_1_LSB:
case QT1050_KEY_SIGNAL_2_MSB:
case QT1050_KEY_SIGNAL_2_LSB:
case QT1050_KEY_SIGNAL_3_MSB:
case QT1050_KEY_SIGNAL_3_LSB:
case QT1050_KEY_SIGNAL_4_MSB:
case QT1050_KEY_SIGNAL_4_LSB:
return true;
default:
return false;
}
}
static const struct regmap_range qt1050_readable_ranges[] = {
regmap_reg_range(QT1050_CHIP_ID, QT1050_KEY_STATUS),
regmap_reg_range(QT1050_KEY_SIGNAL_0_MSB, QT1050_KEY_SIGNAL_1_LSB),
regmap_reg_range(QT1050_KEY_SIGNAL_2_MSB, QT1050_KEY_SIGNAL_4_LSB),
regmap_reg_range(QT1050_REF_DATA_0_MSB, QT1050_REF_DATA_1_LSB),
regmap_reg_range(QT1050_REF_DATA_2_MSB, QT1050_REF_DATA_4_LSB),
regmap_reg_range(QT1050_NTHR_0, QT1050_NTHR_1),
regmap_reg_range(QT1050_NTHR_2, QT1050_NTHR_4),
regmap_reg_range(QT1050_PULSE_SCALE_0, QT1050_PULSE_SCALE_1),
regmap_reg_range(QT1050_PULSE_SCALE_2, QT1050_PULSE_SCALE_4),
regmap_reg_range(QT1050_DI_AKS_0, QT1050_DI_AKS_1),
regmap_reg_range(QT1050_DI_AKS_2, QT1050_DI_AKS_4),
regmap_reg_range(QT1050_CSD_0, QT1050_CSD_1),
regmap_reg_range(QT1050_CSD_2, QT1050_RES_CAL),
};
static const struct regmap_access_table qt1050_readable_table = {
.yes_ranges = qt1050_readable_ranges,
.n_yes_ranges = ARRAY_SIZE(qt1050_readable_ranges),
};
static const struct regmap_range qt1050_writeable_ranges[] = {
regmap_reg_range(QT1050_NTHR_0, QT1050_NTHR_1),
regmap_reg_range(QT1050_NTHR_2, QT1050_NTHR_4),
regmap_reg_range(QT1050_PULSE_SCALE_0, QT1050_PULSE_SCALE_1),
regmap_reg_range(QT1050_PULSE_SCALE_2, QT1050_PULSE_SCALE_4),
regmap_reg_range(QT1050_DI_AKS_0, QT1050_DI_AKS_1),
regmap_reg_range(QT1050_DI_AKS_2, QT1050_DI_AKS_4),
regmap_reg_range(QT1050_CSD_0, QT1050_CSD_1),
regmap_reg_range(QT1050_CSD_2, QT1050_RES_CAL),
};
static const struct regmap_access_table qt1050_writeable_table = {
.yes_ranges = qt1050_writeable_ranges,
.n_yes_ranges = ARRAY_SIZE(qt1050_writeable_ranges),
};
static struct regmap_config qt1050_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = QT1050_RES_CAL,
.cache_type = REGCACHE_RBTREE,
.wr_table = &qt1050_writeable_table,
.rd_table = &qt1050_readable_table,
.volatile_reg = qt1050_volatile_reg,
};
static bool qt1050_identify(struct qt1050_priv *ts)
{
unsigned int val;
int err;
/* Read Chip ID */
regmap_read(ts->regmap, QT1050_CHIP_ID, &val);
if (val != QT1050_CHIP_ID_VER) {
dev_err(&ts->client->dev, "ID %d not supported\n", val);
return false;
}
/* Read firmware version */
err = regmap_read(ts->regmap, QT1050_FW_VERSION, &val);
if (err) {
dev_err(&ts->client->dev, "could not read the firmware version\n");
return false;
}
dev_info(&ts->client->dev, "AT42QT1050 firmware version %1d.%1d\n",
val >> 4, val & 0xf);
return true;
}
static irqreturn_t qt1050_irq_threaded(int irq, void *dev_id)
{
struct qt1050_priv *ts = dev_id;
struct input_dev *input = ts->input;
unsigned long new_keys, changed;
unsigned int val;
int i, err;
/* Read the detected status register, thus clearing interrupt */
err = regmap_read(ts->regmap, QT1050_DET_STATUS, &val);
if (err) {
dev_err(&ts->client->dev, "Fail to read detection status: %d\n",
err);
return IRQ_NONE;
}
/* Read which key changed, keys are not continuous */
err = regmap_read(ts->regmap, QT1050_KEY_STATUS, &val);
if (err) {
dev_err(&ts->client->dev,
"Fail to determine the key status: %d\n", err);
return IRQ_NONE;
}
new_keys = (val & 0x70) >> 2 | (val & 0x6) >> 1;
changed = ts->last_keys ^ new_keys;
/* Report registered keys only */
changed &= ts->reg_keys;
for_each_set_bit(i, &changed, QT1050_MAX_KEYS)
input_report_key(input, ts->keys[i].keycode,
test_bit(i, &new_keys));
ts->last_keys = new_keys;
input_sync(input);
return IRQ_HANDLED;
}
static const struct qt1050_key_regs *qt1050_get_key_regs(int key_num)
{
return &qt1050_key_regs_data[key_num];
}
static int qt1050_set_key(struct regmap *map, int number, int on)
{
const struct qt1050_key_regs *key_regs;
key_regs = qt1050_get_key_regs(number);
return regmap_update_bits(map, key_regs->di_aks, 0xfc,
on ? BIT(4) : 0x00);
}
static int qt1050_apply_fw_data(struct qt1050_priv *ts)
{
struct regmap *map = ts->regmap;
struct qt1050_key *button = &ts->keys[0];
const struct qt1050_key_regs *key_regs;
int i, err;
/* Disable all keys and enable only the specified ones */
for (i = 0; i < QT1050_MAX_KEYS; i++) {
err = qt1050_set_key(map, i, 0);
if (err)
return err;
}
for (i = 0; i < QT1050_MAX_KEYS; i++, button++) {
/* Keep KEY_RESERVED keys off */
if (button->keycode == KEY_RESERVED)
continue;
err = qt1050_set_key(map, button->num, 1);
if (err)
return err;
key_regs = qt1050_get_key_regs(button->num);
err = regmap_write(map, key_regs->pulse_scale,
(button->samples << 4) | (button->scale));
if (err)
return err;
err = regmap_write(map, key_regs->csd, button->charge_delay);
if (err)
return err;
err = regmap_write(map, key_regs->nthr, button->thr_cnt);
if (err)
return err;
}
return 0;
}
static int qt1050_parse_fw(struct qt1050_priv *ts)
{
struct device *dev = &ts->client->dev;
struct fwnode_handle *child;
int nbuttons;
nbuttons = device_get_child_node_count(dev);
if (nbuttons == 0 || nbuttons > QT1050_MAX_KEYS)
return -ENODEV;
device_for_each_child_node(dev, child) {
struct qt1050_key button;
/* Required properties */
if (fwnode_property_read_u32(child, "linux,code",
&button.keycode)) {
dev_err(dev, "Button without keycode\n");
goto err;
}
if (button.keycode >= KEY_MAX) {
dev_err(dev, "Invalid keycode 0x%x\n",
button.keycode);
goto err;
}
if (fwnode_property_read_u32(child, "reg",
&button.num)) {
dev_err(dev, "Button without pad number\n");
goto err;
}
if (button.num < 0 || button.num > QT1050_MAX_KEYS - 1)
goto err;
ts->reg_keys |= BIT(button.num);
/* Optional properties */
if (fwnode_property_read_u32(child,
"microchip,pre-charge-time-ns",
&button.charge_delay)) {
button.charge_delay = 0;
} else {
if (button.charge_delay % 2500 == 0)
button.charge_delay =
button.charge_delay / 2500;
else
button.charge_delay = 0;
}
if (fwnode_property_read_u32(child, "microchip,average-samples",
&button.samples)) {
button.samples = 0;
} else {
if (is_power_of_2(button.samples))
button.samples = ilog2(button.samples);
else
button.samples = 0;
}
if (fwnode_property_read_u32(child, "microchip,average-scaling",
&button.scale)) {
button.scale = 0;
} else {
if (is_power_of_2(button.scale))
button.scale = ilog2(button.scale);
else
button.scale = 0;
}
if (fwnode_property_read_u32(child, "microchip,threshold",
&button.thr_cnt)) {
button.thr_cnt = 20;
} else {
if (button.thr_cnt > 255)
button.thr_cnt = 20;
}
ts->keys[button.num] = button;
}
return 0;
err:
fwnode_handle_put(child);
return -EINVAL;
}
static int qt1050_probe(struct i2c_client *client)
{
struct qt1050_priv *ts;
struct input_dev *input;
struct device *dev = &client->dev;
struct regmap *map;
unsigned int status, i;
int err;
/* Check basic functionality */
err = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE);
if (!err) {
dev_err(&client->dev, "%s adapter not supported\n",
dev_driver_string(&client->adapter->dev));
return -ENODEV;
}
if (!client->irq) {
dev_err(dev, "assign a irq line to this device\n");
return -EINVAL;
}
ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
if (!ts)
return -ENOMEM;
input = devm_input_allocate_device(dev);
if (!input)
return -ENOMEM;
map = devm_regmap_init_i2c(client, &qt1050_regmap_config);
if (IS_ERR(map))
return PTR_ERR(map);
ts->client = client;
ts->input = input;
ts->regmap = map;
i2c_set_clientdata(client, ts);
/* Identify the qt1050 chip */
if (!qt1050_identify(ts))
return -ENODEV;
/* Get pdata */
err = qt1050_parse_fw(ts);
if (err) {
dev_err(dev, "Failed to parse firmware: %d\n", err);
return err;
}
input->name = "AT42QT1050 QTouch Sensor";
input->dev.parent = &client->dev;
input->id.bustype = BUS_I2C;
/* Add the keycode */
input->keycode = ts->keycodes;
input->keycodesize = sizeof(ts->keycodes[0]);
input->keycodemax = QT1050_MAX_KEYS;
__set_bit(EV_KEY, input->evbit);
for (i = 0; i < QT1050_MAX_KEYS; i++) {
ts->keycodes[i] = ts->keys[i].keycode;
__set_bit(ts->keycodes[i], input->keybit);
}
/* Trigger re-calibration */
err = regmap_update_bits(ts->regmap, QT1050_RES_CAL, 0x7f,
QT1050_RES_CAL_CALIBRATE);
if (err) {
dev_err(dev, "Trigger calibration failed: %d\n", err);
return err;
}
err = regmap_read_poll_timeout(ts->regmap, QT1050_DET_STATUS, status,
status >> 7 == 1, 10000, 200000);
if (err) {
dev_err(dev, "Calibration failed: %d\n", err);
return err;
}
/* Soft reset to set defaults */
err = regmap_update_bits(ts->regmap, QT1050_RES_CAL,
QT1050_RES_CAL_RESET, QT1050_RES_CAL_RESET);
if (err) {
dev_err(dev, "Trigger soft reset failed: %d\n", err);
return err;
}
msleep(QT1050_RESET_TIME);
/* Set pdata */
err = qt1050_apply_fw_data(ts);
if (err) {
dev_err(dev, "Failed to set firmware data: %d\n", err);
return err;
}
err = devm_request_threaded_irq(dev, client->irq, NULL,
qt1050_irq_threaded, IRQF_ONESHOT,
"qt1050", ts);
if (err) {
dev_err(&client->dev, "Failed to request irq: %d\n", err);
return err;
}
/* Clear #CHANGE line */
err = regmap_read(ts->regmap, QT1050_DET_STATUS, &status);
if (err) {
dev_err(dev, "Failed to clear #CHANGE line level: %d\n", err);
return err;
}
/* Register the input device */
err = input_register_device(ts->input);
if (err) {
dev_err(&client->dev, "Failed to register input device: %d\n",
err);
return err;
}
return 0;
}
static int __maybe_unused qt1050_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct qt1050_priv *ts = i2c_get_clientdata(client);
disable_irq(client->irq);
/*
* Set measurement interval to 1s (125 x 8ms) if wakeup is allowed
* else turn off. The 1s interval seems to be a good compromise between
* low power and response time.
*/
return regmap_write(ts->regmap, QT1050_LPMODE,
device_may_wakeup(dev) ? 125 : 0);
}
static int __maybe_unused qt1050_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct qt1050_priv *ts = i2c_get_clientdata(client);
enable_irq(client->irq);
/* Set measurement interval back to 16ms (2 x 8ms) */
return regmap_write(ts->regmap, QT1050_LPMODE, 2);
}
static SIMPLE_DEV_PM_OPS(qt1050_pm_ops, qt1050_suspend, qt1050_resume);
static const struct of_device_id __maybe_unused qt1050_of_match[] = {
{ .compatible = "microchip,qt1050", },
{ },
};
MODULE_DEVICE_TABLE(of, qt1050_of_match);
static struct i2c_driver qt1050_driver = {
.driver = {
.name = "qt1050",
.of_match_table = of_match_ptr(qt1050_of_match),
.pm = &qt1050_pm_ops,
},
.probe_new = qt1050_probe,
};
module_i2c_driver(qt1050_driver);
MODULE_AUTHOR("Marco Felsch <kernel@pengutronix.de");
MODULE_DESCRIPTION("Driver for AT42QT1050 QTouch sensor");
MODULE_LICENSE("GPL v2");
......@@ -15,6 +15,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/pm_wakeirq.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
......@@ -167,28 +168,9 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
}
device_init_wakeup(&pdev->dev, pdata->wakeup);
return 0;
}
static int __maybe_unused imx_snvs_pwrkey_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
if (device_may_wakeup(&pdev->dev))
enable_irq_wake(pdata->irq);
return 0;
}
static int __maybe_unused imx_snvs_pwrkey_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
if (device_may_wakeup(&pdev->dev))
disable_irq_wake(pdata->irq);
error = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);
if (error)
dev_err(&pdev->dev, "irq wake enable failed.\n");
return 0;
}
......@@ -199,13 +181,9 @@ static const struct of_device_id imx_snvs_pwrkey_ids[] = {
};
MODULE_DEVICE_TABLE(of, imx_snvs_pwrkey_ids);
static SIMPLE_DEV_PM_OPS(imx_snvs_pwrkey_pm_ops, imx_snvs_pwrkey_suspend,
imx_snvs_pwrkey_resume);
static struct platform_driver imx_snvs_pwrkey_driver = {
.driver = {
.name = "snvs_pwrkey",
.pm = &imx_snvs_pwrkey_pm_ops,
.of_match_table = imx_snvs_pwrkey_ids,
},
.probe = imx_snvs_pwrkey_probe,
......
......@@ -46,6 +46,7 @@
#define CONTINUE_TIME_SEL(x) ((x) << 16) /* 4 bits */
#define KEY_MODE_SEL(x) ((x) << 12) /* 2 bits */
#define LEVELA_B_CNT(x) ((x) << 8) /* 4 bits */
#define HOLD_KEY_EN(x) ((x) << 7)
#define HOLD_EN(x) ((x) << 6)
#define LEVELB_VOL(x) ((x) << 4) /* 2 bits */
#define SAMPLE_RATE(x) ((x) << 2) /* 2 bits */
......@@ -63,6 +64,25 @@
#define CHAN0_KEYDOWN_IRQ BIT(1)
#define CHAN0_DATA_IRQ BIT(0)
/* struct lradc_variant - Describe sun4i-a10-lradc-keys hardware variant
* @divisor_numerator: The numerator of lradc Vref internally divisor
* @divisor_denominator: The denominator of lradc Vref internally divisor
*/
struct lradc_variant {
u8 divisor_numerator;
u8 divisor_denominator;
};
static const struct lradc_variant lradc_variant_a10 = {
.divisor_numerator = 2,
.divisor_denominator = 3
};
static const struct lradc_variant r_lradc_variant_a83t = {
.divisor_numerator = 3,
.divisor_denominator = 4
};
struct sun4i_lradc_keymap {
u32 voltage;
u32 keycode;
......@@ -74,6 +94,7 @@ struct sun4i_lradc_data {
void __iomem *base;
struct regulator *vref_supply;
struct sun4i_lradc_keymap *chan0_map;
const struct lradc_variant *variant;
u32 chan0_map_count;
u32 chan0_keycode;
u32 vref;
......@@ -128,9 +149,9 @@ static int sun4i_lradc_open(struct input_dev *dev)
if (error)
return error;
/* lradc Vref internally is divided by 2/3 */
lradc->vref = regulator_get_voltage(lradc->vref_supply) * 2 / 3;
lradc->vref = regulator_get_voltage(lradc->vref_supply) *
lradc->variant->divisor_numerator /
lradc->variant->divisor_denominator;
/*
* Set sample time to 4 ms / 250 Hz. Wait 2 * 4 ms for key to
* stabilize on press, wait (1 + 1) * 4 ms for key release
......@@ -222,6 +243,12 @@ static int sun4i_lradc_probe(struct platform_device *pdev)
if (error)
return error;
lradc->variant = of_device_get_match_data(&pdev->dev);
if (!lradc->variant) {
dev_err(&pdev->dev, "Missing sun4i-a10-lradc-keys variant\n");
return -EINVAL;
}
lradc->vref_supply = devm_regulator_get(dev, "vref");
if (IS_ERR(lradc->vref_supply))
return PTR_ERR(lradc->vref_supply);
......@@ -265,7 +292,10 @@ static int sun4i_lradc_probe(struct platform_device *pdev)
}
static const struct of_device_id sun4i_lradc_of_match[] = {
{ .compatible = "allwinner,sun4i-a10-lradc-keys", },
{ .compatible = "allwinner,sun4i-a10-lradc-keys",
.data = &lradc_variant_a10 },
{ .compatible = "allwinner,sun8i-a83t-r-lradc",
.data = &r_lradc_variant_a83t },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match);
......
......@@ -290,6 +290,18 @@ config INPUT_GPIO_DECODER
To compile this driver as a module, choose M here: the module
will be called gpio_decoder.
config INPUT_GPIO_VIBRA
tristate "GPIO vibrator support"
depends on GPIOLIB || COMPILE_TEST
select INPUT_FF_MEMLESS
help
Say Y here to get support for GPIO based vibrator devices.
If unsure, say N.
To compile this driver as a module, choose M here: the module will be
called gpio-vibra.
config INPUT_IXP4XX_BEEPER
tristate "IXP4XX Beeper support"
depends on ARCH_IXP4XX
......
......@@ -36,6 +36,7 @@ obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o
obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o
obj-$(CONFIG_INPUT_GPIO_DECODER) += gpio_decoder.o
obj-$(CONFIG_INPUT_GPIO_VIBRA) += gpio-vibra.o
obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
......
// SPDX-License-Identifier: GPL-2.0+
/*
* GPIO vibrator driver
*
* Copyright (C) 2019 Luca Weiss <luca@z3ntu.xyz>
*
* Based on PWM vibrator driver:
* Copyright (C) 2017 Collabora Ltd.
*
* Based on previous work from:
* Copyright (C) 2012 Dmitry Torokhov <dmitry.torokhov@gmail.com>
*
* Based on PWM beeper driver:
* Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
*/
#include <linux/gpio/consumer.h>
#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
struct gpio_vibrator {
struct input_dev *input;
struct gpio_desc *gpio;
struct regulator *vcc;
struct work_struct play_work;
bool running;
bool vcc_on;
};
static int gpio_vibrator_start(struct gpio_vibrator *vibrator)
{
struct device *pdev = vibrator->input->dev.parent;
int err;
if (!vibrator->vcc_on) {
err = regulator_enable(vibrator->vcc);
if (err) {
dev_err(pdev, "failed to enable regulator: %d\n", err);
return err;
}
vibrator->vcc_on = true;
}
gpiod_set_value_cansleep(vibrator->gpio, 1);
return 0;
}
static void gpio_vibrator_stop(struct gpio_vibrator *vibrator)
{
gpiod_set_value_cansleep(vibrator->gpio, 0);
if (vibrator->vcc_on) {
regulator_disable(vibrator->vcc);
vibrator->vcc_on = false;
}
}
static void gpio_vibrator_play_work(struct work_struct *work)
{
struct gpio_vibrator *vibrator =
container_of(work, struct gpio_vibrator, play_work);
if (vibrator->running)
gpio_vibrator_start(vibrator);
else
gpio_vibrator_stop(vibrator);
}
static int gpio_vibrator_play_effect(struct input_dev *dev, void *data,
struct ff_effect *effect)
{
struct gpio_vibrator *vibrator = input_get_drvdata(dev);
int level;
level = effect->u.rumble.strong_magnitude;
if (!level)
level = effect->u.rumble.weak_magnitude;
vibrator->running = level;
schedule_work(&vibrator->play_work);
return 0;
}
static void gpio_vibrator_close(struct input_dev *input)
{
struct gpio_vibrator *vibrator = input_get_drvdata(input);
cancel_work_sync(&vibrator->play_work);
gpio_vibrator_stop(vibrator);
vibrator->running = false;
}
static int gpio_vibrator_probe(struct platform_device *pdev)
{
struct gpio_vibrator *vibrator;
int err;
vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL);
if (!vibrator)
return -ENOMEM;
vibrator->input = devm_input_allocate_device(&pdev->dev);
if (!vibrator->input)
return -ENOMEM;
vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc");
err = PTR_ERR_OR_ZERO(vibrator->vcc);
if (err) {
if (err != -EPROBE_DEFER)
dev_err(&pdev->dev, "Failed to request regulator: %d\n",
err);
return err;
}
vibrator->gpio = devm_gpiod_get(&pdev->dev, "enable", GPIOD_OUT_LOW);
err = PTR_ERR_OR_ZERO(vibrator->gpio);
if (err) {
if (err != -EPROBE_DEFER)
dev_err(&pdev->dev, "Failed to request main gpio: %d\n",
err);
return err;
}
INIT_WORK(&vibrator->play_work, gpio_vibrator_play_work);
vibrator->input->name = "gpio-vibrator";
vibrator->input->id.bustype = BUS_HOST;
vibrator->input->close = gpio_vibrator_close;
input_set_drvdata(vibrator->input, vibrator);
input_set_capability(vibrator->input, EV_FF, FF_RUMBLE);
err = input_ff_create_memless(vibrator->input, NULL,
gpio_vibrator_play_effect);
if (err) {
dev_err(&pdev->dev, "Couldn't create FF dev: %d\n", err);
return err;
}
err = input_register_device(vibrator->input);
if (err) {
dev_err(&pdev->dev, "Couldn't register input dev: %d\n", err);
return err;
}
platform_set_drvdata(pdev, vibrator);
return 0;
}
static int __maybe_unused gpio_vibrator_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct gpio_vibrator *vibrator = platform_get_drvdata(pdev);
cancel_work_sync(&vibrator->play_work);
if (vibrator->running)
gpio_vibrator_stop(vibrator);
return 0;
}
static int __maybe_unused gpio_vibrator_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct gpio_vibrator *vibrator = platform_get_drvdata(pdev);
if (vibrator->running)
gpio_vibrator_start(vibrator);
return 0;
}
static SIMPLE_DEV_PM_OPS(gpio_vibrator_pm_ops,
gpio_vibrator_suspend, gpio_vibrator_resume);
#ifdef CONFIG_OF
static const struct of_device_id gpio_vibra_dt_match_table[] = {
{ .compatible = "gpio-vibrator" },
{}
};
MODULE_DEVICE_TABLE(of, gpio_vibra_dt_match_table);
#endif
static struct platform_driver gpio_vibrator_driver = {
.probe = gpio_vibrator_probe,
.driver = {
.name = "gpio-vibrator",
.pm = &gpio_vibrator_pm_ops,
.of_match_table = of_match_ptr(gpio_vibra_dt_match_table),
},
};
module_platform_driver(gpio_vibrator_driver);
MODULE_AUTHOR("Luca Weiss <luca@z3ntu.xy>");
MODULE_DESCRIPTION("GPIO vibrator driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:gpio-vibrator");
......@@ -373,6 +373,8 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
if (ps2_handle_response(&psmouse->ps2dev, data))
goto out;
pm_wakeup_event(&serio->dev, 0);
if (psmouse->state <= PSMOUSE_RESYNCING)
goto out;
......
......@@ -456,25 +456,15 @@ static int rmi_f54_vidioc_fmt(struct file *file, void *priv,
static int rmi_f54_vidioc_enum_fmt(struct file *file, void *priv,
struct v4l2_fmtdesc *fmt)
{
struct f54_data *f54 = video_drvdata(file);
if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
switch (fmt->index) {
case 0:
fmt->pixelformat = V4L2_TCH_FMT_DELTA_TD16;
break;
case 1:
fmt->pixelformat = V4L2_TCH_FMT_DELTA_TD08;
break;
case 2:
fmt->pixelformat = V4L2_TCH_FMT_TU16;
break;
default:
if (fmt->index)
return -EINVAL;
}
fmt->pixelformat = f54->format.pixelformat;
return 0;
}
......@@ -692,6 +682,7 @@ static int rmi_f54_probe(struct rmi_function *fn)
return -ENOMEM;
rmi_f54_create_input_map(f54);
rmi_f54_set_input(f54, 0);
/* register video device */
strlcpy(f54->v4l2.name, F54_NAME, sizeof(f54->v4l2.name));
......
......@@ -254,6 +254,7 @@ config SERIO_APBPS2
config SERIO_OLPC_APSP
tristate "OLPC AP-SP input support"
depends on ARCH_MMP || COMPILE_TEST
help
Say Y here if you want support for the keyboard and touchpad included
in the OLPC XO-1.75 and XO-4 laptops.
......
......@@ -440,5 +440,7 @@ static void __exit hv_kbd_exit(void)
}
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Microsoft Hyper-V Synthetic Keyboard Driver");
module_init(hv_kbd_init);
module_exit(hv_kbd_exit);
......@@ -573,9 +573,6 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
port = &i8042_ports[port_no];
serio = port->exists ? port->serio : NULL;
if (irq && serio)
pm_wakeup_event(&serio->dev, 0);
filter_dbg(port->driver_bound, data, "<- i8042 (interrupt, %d, %d%s%s)\n",
port_no, irq,
dfl & SERIO_PARITY ? ", bad parity" : "",
......
......@@ -409,6 +409,7 @@ bool ps2_handle_ack(struct ps2dev *ps2dev, u8 data)
ps2dev->nak = PS2_RET_ERR;
break;
}
/* Fall through */
/*
* Workaround for mice which don't ACK the Get ID command.
......
......@@ -1312,4 +1312,14 @@ config TOUCHSCREEN_ROHM_BU21023
To compile this driver as a module, choose M here: the
module will be called bu21023_ts.
config TOUCHSCREEN_IQS5XX
tristate "Azoteq IQS550/572/525 trackpad/touchscreen controller"
depends on I2C
help
Say Y to enable support for the Azoteq IQS550/572/525
family of trackpad/touchscreen controllers.
To compile this driver as a module, choose M here: the
module will be called iqs5xx.
endif
......@@ -110,3 +110,4 @@ obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o
obj-$(CONFIG_TOUCHSCREEN_COLIBRI_VF50) += colibri-vf50-ts.o
obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023) += rohm_bu21023.o
obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW) += raspberrypi-ts.o
obj-$(CONFIG_TOUCHSCREEN_IQS5XX) += iqs5xx.o
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2012 Simon Budig, <simon.budig@kernelconcepts.de>
* Daniel Wagener <daniel.wagener@kernelconcepts.de> (M09 firmware support)
* Lothar Waßmann <LW@KARO-electronics.de> (DT support)
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
......@@ -39,7 +27,6 @@
#include <linux/gpio/consumer.h>
#include <linux/input/mt.h>
#include <linux/input/touchscreen.h>
#include <linux/of_device.h>
#define WORK_REGISTER_THRESHOLD 0x00
#define WORK_REGISTER_REPORT_RATE 0x08
......@@ -1073,7 +1060,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
return -ENOMEM;
}
chip_data = of_device_get_match_data(&client->dev);
chip_data = device_get_match_data(&client->dev);
if (!chip_data)
chip_data = (const struct edt_i2c_chip_data *)id->driver_data;
if (!chip_data || !chip_data->max_support_points) {
......@@ -1254,7 +1241,6 @@ static const struct i2c_device_id edt_ft5x06_ts_id[] = {
};
MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id);
#ifdef CONFIG_OF
static const struct of_device_id edt_ft5x06_of_match[] = {
{ .compatible = "edt,edt-ft5206", .data = &edt_ft5x06_data },
{ .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data },
......@@ -1266,12 +1252,11 @@ static const struct of_device_id edt_ft5x06_of_match[] = {
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match);
#endif
static struct i2c_driver edt_ft5x06_ts_driver = {
.driver = {
.name = "edt_ft5x06",
.of_match_table = of_match_ptr(edt_ft5x06_of_match),
.of_match_table = edt_ft5x06_of_match,
.pm = &edt_ft5x06_ts_pm_ops,
},
.id_table = edt_ft5x06_ts_id,
......@@ -1283,4 +1268,4 @@ module_i2c_driver(edt_ft5x06_ts_driver);
MODULE_AUTHOR("Simon Budig <simon.budig@kernelconcepts.de>");
MODULE_DESCRIPTION("EDT FT5x06 I2C Touchscreen Driver");
MODULE_LICENSE("GPL");
MODULE_LICENSE("GPL v2");
......@@ -27,6 +27,7 @@
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/of.h>
......@@ -47,6 +48,8 @@ struct goodix_ts_data {
struct touchscreen_properties prop;
unsigned int max_touch_num;
unsigned int int_trigger_type;
struct regulator *avdd28;
struct regulator *vddio;
struct gpio_desc *gpiod_int;
struct gpio_desc *gpiod_rst;
u16 id;
......@@ -216,6 +219,7 @@ static const struct goodix_chip_data *goodix_get_chip_data(u16 id)
{
switch (id) {
case 1151:
case 5663:
case 5688:
return &gt1x_chip_data;
......@@ -532,6 +536,24 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
return -EINVAL;
dev = &ts->client->dev;
ts->avdd28 = devm_regulator_get(dev, "AVDD28");
if (IS_ERR(ts->avdd28)) {
error = PTR_ERR(ts->avdd28);
if (error != -EPROBE_DEFER)
dev_err(dev,
"Failed to get AVDD28 regulator: %d\n", error);
return error;
}
ts->vddio = devm_regulator_get(dev, "VDDIO");
if (IS_ERR(ts->vddio)) {
error = PTR_ERR(ts->vddio);
if (error != -EPROBE_DEFER)
dev_err(dev,
"Failed to get VDDIO regulator: %d\n", error);
return error;
}
/* Get the interrupt GPIO pin number */
gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN);
if (IS_ERR(gpiod)) {
......@@ -764,6 +786,14 @@ static void goodix_config_cb(const struct firmware *cfg, void *ctx)
complete_all(&ts->firmware_loading_complete);
}
static void goodix_disable_regulators(void *arg)
{
struct goodix_ts_data *ts = arg;
regulator_disable(ts->vddio);
regulator_disable(ts->avdd28);
}
static int goodix_ts_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
......@@ -789,6 +819,29 @@ static int goodix_ts_probe(struct i2c_client *client,
if (error)
return error;
/* power up the controller */
error = regulator_enable(ts->avdd28);
if (error) {
dev_err(&client->dev,
"Failed to enable AVDD28 regulator: %d\n",
error);
return error;
}
error = regulator_enable(ts->vddio);
if (error) {
dev_err(&client->dev,
"Failed to enable VDDIO regulator: %d\n",
error);
regulator_disable(ts->avdd28);
return error;
}
error = devm_add_action_or_reset(&client->dev,
goodix_disable_regulators, ts);
if (error)
return error;
if (ts->gpiod_int && ts->gpiod_rst) {
/* reset the controller */
error = goodix_reset(ts);
......@@ -945,6 +998,7 @@ MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);
#ifdef CONFIG_OF
static const struct of_device_id goodix_of_match[] = {
{ .compatible = "goodix,gt1151" },
{ .compatible = "goodix,gt5663" },
{ .compatible = "goodix,gt5688" },
{ .compatible = "goodix,gt911" },
{ .compatible = "goodix,gt9110" },
......
// SPDX-License-Identifier: GPL-2.0+
/*
* Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
*
* Copyright (C) 2018
* Author: Jeff LaBundy <jeff@labundy.com>
*
* These devices require firmware exported from a PC-based configuration tool
* made available by the vendor. Firmware files may be pushed to the device's
* nonvolatile memory by writing the filename to the 'fw_file' sysfs control.
*
* Link to PC-based configuration tool and data sheet: http://www.azoteq.com/
*/
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/firmware.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input/mt.h>
#include <linux/input/touchscreen.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
#define IQS5XX_FW_FILE_LEN 64
#define IQS5XX_NUM_RETRIES 10
#define IQS5XX_NUM_POINTS 256
#define IQS5XX_NUM_CONTACTS 5
#define IQS5XX_WR_BYTES_MAX 2
#define IQS5XX_PROD_NUM_IQS550 40
#define IQS5XX_PROD_NUM_IQS572 58
#define IQS5XX_PROD_NUM_IQS525 52
#define IQS5XX_PROJ_NUM_A000 0
#define IQS5XX_PROJ_NUM_B000 15
#define IQS5XX_MAJOR_VER_MIN 2
#define IQS5XX_RESUME 0x00
#define IQS5XX_SUSPEND 0x01
#define IQS5XX_SW_INPUT_EVENT 0x10
#define IQS5XX_SETUP_COMPLETE 0x40
#define IQS5XX_EVENT_MODE 0x01
#define IQS5XX_TP_EVENT 0x04
#define IQS5XX_FLIP_X 0x01
#define IQS5XX_FLIP_Y 0x02
#define IQS5XX_SWITCH_XY_AXIS 0x04
#define IQS5XX_PROD_NUM 0x0000
#define IQS5XX_ABS_X 0x0016
#define IQS5XX_ABS_Y 0x0018
#define IQS5XX_SYS_CTRL0 0x0431
#define IQS5XX_SYS_CTRL1 0x0432
#define IQS5XX_SYS_CFG0 0x058E
#define IQS5XX_SYS_CFG1 0x058F
#define IQS5XX_TOTAL_RX 0x063D
#define IQS5XX_TOTAL_TX 0x063E
#define IQS5XX_XY_CFG0 0x0669
#define IQS5XX_X_RES 0x066E
#define IQS5XX_Y_RES 0x0670
#define IQS5XX_CHKSM 0x83C0
#define IQS5XX_APP 0x8400
#define IQS5XX_CSTM 0xBE00
#define IQS5XX_PMAP_END 0xBFFF
#define IQS5XX_END_COMM 0xEEEE
#define IQS5XX_CHKSM_LEN (IQS5XX_APP - IQS5XX_CHKSM)
#define IQS5XX_APP_LEN (IQS5XX_CSTM - IQS5XX_APP)
#define IQS5XX_CSTM_LEN (IQS5XX_PMAP_END + 1 - IQS5XX_CSTM)
#define IQS5XX_PMAP_LEN (IQS5XX_PMAP_END + 1 - IQS5XX_CHKSM)
#define IQS5XX_REC_HDR_LEN 4
#define IQS5XX_REC_LEN_MAX 255
#define IQS5XX_REC_TYPE_DATA 0x00
#define IQS5XX_REC_TYPE_EOF 0x01
#define IQS5XX_BL_ADDR_MASK 0x40
#define IQS5XX_BL_CMD_VER 0x00
#define IQS5XX_BL_CMD_READ 0x01
#define IQS5XX_BL_CMD_EXEC 0x02
#define IQS5XX_BL_CMD_CRC 0x03
#define IQS5XX_BL_BLK_LEN_MAX 64
#define IQS5XX_BL_ID 0x0200
#define IQS5XX_BL_STATUS_RESET 0x00
#define IQS5XX_BL_STATUS_AVAIL 0xA5
#define IQS5XX_BL_STATUS_NONE 0xEE
#define IQS5XX_BL_CRC_PASS 0x00
#define IQS5XX_BL_CRC_FAIL 0x01
#define IQS5XX_BL_ATTEMPTS 3
struct iqs5xx_private {
struct i2c_client *client;
struct input_dev *input;
struct gpio_desc *reset_gpio;
struct mutex lock;
u8 bl_status;
};
struct iqs5xx_dev_id_info {
__be16 prod_num;
__be16 proj_num;
u8 major_ver;
u8 minor_ver;
u8 bl_status;
} __packed;
struct iqs5xx_ihex_rec {
char start;
char len[2];
char addr[4];
char type[2];
char data[2];
} __packed;
struct iqs5xx_touch_data {
__be16 abs_x;
__be16 abs_y;
__be16 strength;
u8 area;
} __packed;
static int iqs5xx_read_burst(struct i2c_client *client,
u16 reg, void *val, u16 len)
{
__be16 reg_buf = cpu_to_be16(reg);
int ret, i;
struct i2c_msg msg[] = {
{
.addr = client->addr,
.flags = 0,
.len = sizeof(reg_buf),
.buf = (u8 *)&reg_buf,
},
{
.addr = client->addr,
.flags = I2C_M_RD,
.len = len,
.buf = (u8 *)val,
},
};
/*
* The first addressing attempt outside of a communication window fails
* and must be retried, after which the device clock stretches until it
* is available.
*/
for (i = 0; i < IQS5XX_NUM_RETRIES; i++) {
ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
if (ret == ARRAY_SIZE(msg))
return 0;
usleep_range(200, 300);
}
if (ret >= 0)
ret = -EIO;
dev_err(&client->dev, "Failed to read from address 0x%04X: %d\n",
reg, ret);
return ret;
}
static int iqs5xx_read_word(struct i2c_client *client, u16 reg, u16 *val)
{
__be16 val_buf;
int error;
error = iqs5xx_read_burst(client, reg, &val_buf, sizeof(val_buf));
if (error)
return error;
*val = be16_to_cpu(val_buf);
return 0;
}
static int iqs5xx_read_byte(struct i2c_client *client, u16 reg, u8 *val)
{
return iqs5xx_read_burst(client, reg, val, sizeof(*val));
}
static int iqs5xx_write_burst(struct i2c_client *client,
u16 reg, const void *val, u16 len)
{
int ret, i;
u16 mlen = sizeof(reg) + len;
u8 mbuf[sizeof(reg) + IQS5XX_WR_BYTES_MAX];
if (len > IQS5XX_WR_BYTES_MAX)
return -EINVAL;
put_unaligned_be16(reg, mbuf);
memcpy(mbuf + sizeof(reg), val, len);
/*
* The first addressing attempt outside of a communication window fails
* and must be retried, after which the device clock stretches until it
* is available.
*/
for (i = 0; i < IQS5XX_NUM_RETRIES; i++) {
ret = i2c_master_send(client, mbuf, mlen);
if (ret == mlen)
return 0;
usleep_range(200, 300);
}
if (ret >= 0)
ret = -EIO;
dev_err(&client->dev, "Failed to write to address 0x%04X: %d\n",
reg, ret);
return ret;
}
static int iqs5xx_write_word(struct i2c_client *client, u16 reg, u16 val)
{
__be16 val_buf = cpu_to_be16(val);
return iqs5xx_write_burst(client, reg, &val_buf, sizeof(val_buf));
}
static int iqs5xx_write_byte(struct i2c_client *client, u16 reg, u8 val)
{
return iqs5xx_write_burst(client, reg, &val, sizeof(val));
}
static void iqs5xx_reset(struct i2c_client *client)
{
struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
gpiod_set_value_cansleep(iqs5xx->reset_gpio, 1);
usleep_range(200, 300);
gpiod_set_value_cansleep(iqs5xx->reset_gpio, 0);
}
static int iqs5xx_bl_cmd(struct i2c_client *client, u8 bl_cmd, u16 bl_addr)
{
struct i2c_msg msg;
int ret;
u8 mbuf[sizeof(bl_cmd) + sizeof(bl_addr)];
msg.addr = client->addr ^ IQS5XX_BL_ADDR_MASK;
msg.flags = 0;
msg.len = sizeof(bl_cmd);
msg.buf = mbuf;
*mbuf = bl_cmd;
switch (bl_cmd) {
case IQS5XX_BL_CMD_VER:
case IQS5XX_BL_CMD_CRC:
case IQS5XX_BL_CMD_EXEC:
break;
case IQS5XX_BL_CMD_READ:
msg.len += sizeof(bl_addr);
put_unaligned_be16(bl_addr, mbuf + sizeof(bl_cmd));
break;
default:
return -EINVAL;
}
ret = i2c_transfer(client->adapter, &msg, 1);
if (ret != 1)
goto msg_fail;
switch (bl_cmd) {
case IQS5XX_BL_CMD_VER:
msg.len = sizeof(u16);
break;
case IQS5XX_BL_CMD_CRC:
msg.len = sizeof(u8);
/*
* This delay saves the bus controller the trouble of having to
* tolerate a relatively long clock-stretching period while the
* CRC is calculated.
*/
msleep(50);
break;
case IQS5XX_BL_CMD_EXEC:
usleep_range(10000, 10100);
/* fall through */
default:
return 0;
}
msg.flags = I2C_M_RD;
ret = i2c_transfer(client->adapter, &msg, 1);
if (ret != 1)
goto msg_fail;
if (bl_cmd == IQS5XX_BL_CMD_VER &&
get_unaligned_be16(mbuf) != IQS5XX_BL_ID) {
dev_err(&client->dev, "Unrecognized bootloader ID: 0x%04X\n",
get_unaligned_be16(mbuf));
return -EINVAL;
}
if (bl_cmd == IQS5XX_BL_CMD_CRC && *mbuf != IQS5XX_BL_CRC_PASS) {
dev_err(&client->dev, "Bootloader CRC failed\n");
return -EIO;
}
return 0;
msg_fail:
if (ret >= 0)
ret = -EIO;
if (bl_cmd != IQS5XX_BL_CMD_VER)
dev_err(&client->dev,
"Unsuccessful bootloader command 0x%02X: %d\n",
bl_cmd, ret);
return ret;
}
static int iqs5xx_bl_open(struct i2c_client *client)
{
int error, i, j;
/*
* The device opens a bootloader polling window for 2 ms following the
* release of reset. If the host cannot establish communication during
* this time frame, it must cycle reset again.
*/
for (i = 0; i < IQS5XX_BL_ATTEMPTS; i++) {
iqs5xx_reset(client);
for (j = 0; j < IQS5XX_NUM_RETRIES; j++) {
error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_VER, 0);
if (!error || error == -EINVAL)
return error;
}
}
dev_err(&client->dev, "Failed to open bootloader: %d\n", error);
return error;
}
static int iqs5xx_bl_write(struct i2c_client *client,
u16 bl_addr, u8 *pmap_data, u16 pmap_len)
{
struct i2c_msg msg;
int ret, i;
u8 mbuf[sizeof(bl_addr) + IQS5XX_BL_BLK_LEN_MAX];
if (pmap_len % IQS5XX_BL_BLK_LEN_MAX)
return -EINVAL;
msg.addr = client->addr ^ IQS5XX_BL_ADDR_MASK;
msg.flags = 0;
msg.len = sizeof(mbuf);
msg.buf = mbuf;
for (i = 0; i < pmap_len; i += IQS5XX_BL_BLK_LEN_MAX) {
put_unaligned_be16(bl_addr + i, mbuf);
memcpy(mbuf + sizeof(bl_addr), pmap_data + i,
sizeof(mbuf) - sizeof(bl_addr));
ret = i2c_transfer(client->adapter, &msg, 1);
if (ret != 1)
goto msg_fail;
usleep_range(10000, 10100);
}
return 0;
msg_fail:
if (ret >= 0)
ret = -EIO;
dev_err(&client->dev, "Failed to write block at address 0x%04X: %d\n",
bl_addr + i, ret);
return ret;
}
static int iqs5xx_bl_verify(struct i2c_client *client,
u16 bl_addr, u8 *pmap_data, u16 pmap_len)
{
struct i2c_msg msg;
int ret, i;
u8 bl_data[IQS5XX_BL_BLK_LEN_MAX];
if (pmap_len % IQS5XX_BL_BLK_LEN_MAX)
return -EINVAL;
msg.addr = client->addr ^ IQS5XX_BL_ADDR_MASK;
msg.flags = I2C_M_RD;
msg.len = sizeof(bl_data);
msg.buf = bl_data;
for (i = 0; i < pmap_len; i += IQS5XX_BL_BLK_LEN_MAX) {
ret = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_READ, bl_addr + i);
if (ret)
return ret;
ret = i2c_transfer(client->adapter, &msg, 1);
if (ret != 1)
goto msg_fail;
if (memcmp(bl_data, pmap_data + i, sizeof(bl_data))) {
dev_err(&client->dev,
"Failed to verify block at address 0x%04X\n",
bl_addr + i);
return -EIO;
}
}
return 0;
msg_fail:
if (ret >= 0)
ret = -EIO;
dev_err(&client->dev, "Failed to read block at address 0x%04X: %d\n",
bl_addr + i, ret);
return ret;
}
static int iqs5xx_set_state(struct i2c_client *client, u8 state)
{
struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
int error1, error2;
if (iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET)
return 0;
mutex_lock(&iqs5xx->lock);
/*
* Addressing the device outside of a communication window prompts it
* to assert the RDY output, so disable the interrupt line to prevent
* the handler from servicing a false interrupt.
*/
disable_irq(client->irq);
error1 = iqs5xx_write_byte(client, IQS5XX_SYS_CTRL1, state);
error2 = iqs5xx_write_byte(client, IQS5XX_END_COMM, 0);
usleep_range(50, 100);
enable_irq(client->irq);
mutex_unlock(&iqs5xx->lock);
if (error1)
return error1;
return error2;
}
static int iqs5xx_open(struct input_dev *input)
{
struct iqs5xx_private *iqs5xx = input_get_drvdata(input);
return iqs5xx_set_state(iqs5xx->client, IQS5XX_RESUME);
}
static void iqs5xx_close(struct input_dev *input)
{
struct iqs5xx_private *iqs5xx = input_get_drvdata(input);
iqs5xx_set_state(iqs5xx->client, IQS5XX_SUSPEND);
}
static int iqs5xx_axis_init(struct i2c_client *client)
{
struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
struct touchscreen_properties prop;
struct input_dev *input;
int error;
u16 max_x, max_x_hw;
u16 max_y, max_y_hw;
u8 val;
if (!iqs5xx->input) {
input = devm_input_allocate_device(&client->dev);
if (!input)
return -ENOMEM;
input->name = client->name;
input->id.bustype = BUS_I2C;
input->open = iqs5xx_open;
input->close = iqs5xx_close;
input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
input_set_capability(input, EV_ABS, ABS_MT_PRESSURE);
error = input_mt_init_slots(input,
IQS5XX_NUM_CONTACTS, INPUT_MT_DIRECT);
if (error) {
dev_err(&client->dev,
"Failed to initialize slots: %d\n", error);
return error;
}
input_set_drvdata(input, iqs5xx);
iqs5xx->input = input;
}
touchscreen_parse_properties(iqs5xx->input, true, &prop);
error = iqs5xx_read_byte(client, IQS5XX_TOTAL_RX, &val);
if (error)
return error;
max_x_hw = (val - 1) * IQS5XX_NUM_POINTS;
error = iqs5xx_read_byte(client, IQS5XX_TOTAL_TX, &val);
if (error)
return error;
max_y_hw = (val - 1) * IQS5XX_NUM_POINTS;
error = iqs5xx_read_byte(client, IQS5XX_XY_CFG0, &val);
if (error)
return error;
if (val & IQS5XX_SWITCH_XY_AXIS)
swap(max_x_hw, max_y_hw);
if (prop.swap_x_y)
val ^= IQS5XX_SWITCH_XY_AXIS;
if (prop.invert_x)
val ^= prop.swap_x_y ? IQS5XX_FLIP_Y : IQS5XX_FLIP_X;
if (prop.invert_y)
val ^= prop.swap_x_y ? IQS5XX_FLIP_X : IQS5XX_FLIP_Y;
error = iqs5xx_write_byte(client, IQS5XX_XY_CFG0, val);
if (error)
return error;
if (prop.max_x > max_x_hw) {
dev_err(&client->dev, "Invalid maximum x-coordinate: %u > %u\n",
prop.max_x, max_x_hw);
return -EINVAL;
} else if (prop.max_x == 0) {
error = iqs5xx_read_word(client, IQS5XX_X_RES, &max_x);
if (error)
return error;
input_abs_set_max(iqs5xx->input,
prop.swap_x_y ? ABS_MT_POSITION_Y :
ABS_MT_POSITION_X,
max_x);
} else {
max_x = (u16)prop.max_x;
}
if (prop.max_y > max_y_hw) {
dev_err(&client->dev, "Invalid maximum y-coordinate: %u > %u\n",
prop.max_y, max_y_hw);
return -EINVAL;
} else if (prop.max_y == 0) {
error = iqs5xx_read_word(client, IQS5XX_Y_RES, &max_y);
if (error)
return error;
input_abs_set_max(iqs5xx->input,
prop.swap_x_y ? ABS_MT_POSITION_X :
ABS_MT_POSITION_Y,
max_y);
} else {
max_y = (u16)prop.max_y;
}
/*
* Write horizontal and vertical resolution to the device in case its
* original defaults were overridden or swapped as per the properties
* specified in the device tree.
*/
error = iqs5xx_write_word(client,
prop.swap_x_y ? IQS5XX_Y_RES : IQS5XX_X_RES,
max_x);
if (error)
return error;
return iqs5xx_write_word(client,
prop.swap_x_y ? IQS5XX_X_RES : IQS5XX_Y_RES,
max_y);
}
static int iqs5xx_dev_init(struct i2c_client *client)
{
struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
struct iqs5xx_dev_id_info *dev_id_info;
int error;
u8 val;
u8 buf[sizeof(*dev_id_info) + 1];
error = iqs5xx_read_burst(client, IQS5XX_PROD_NUM,
&buf[1], sizeof(*dev_id_info));
if (error)
return iqs5xx_bl_open(client);
/*
* A000 and B000 devices use 8-bit and 16-bit addressing, respectively.
* Querying an A000 device's version information with 16-bit addressing
* gives the appearance that the data is shifted by one byte; a nonzero
* leading array element suggests this could be the case (in which case
* the missing zero is prepended).
*/
buf[0] = 0;
dev_id_info = (struct iqs5xx_dev_id_info *)&buf[(buf[1] > 0) ? 0 : 1];
switch (be16_to_cpu(dev_id_info->prod_num)) {
case IQS5XX_PROD_NUM_IQS550:
case IQS5XX_PROD_NUM_IQS572:
case IQS5XX_PROD_NUM_IQS525:
break;
default:
dev_err(&client->dev, "Unrecognized product number: %u\n",
be16_to_cpu(dev_id_info->prod_num));
return -EINVAL;
}
switch (be16_to_cpu(dev_id_info->proj_num)) {
case IQS5XX_PROJ_NUM_A000:
dev_err(&client->dev, "Unsupported project number: %u\n",
be16_to_cpu(dev_id_info->proj_num));
return iqs5xx_bl_open(client);
case IQS5XX_PROJ_NUM_B000:
break;
default:
dev_err(&client->dev, "Unrecognized project number: %u\n",
be16_to_cpu(dev_id_info->proj_num));
return -EINVAL;
}
if (dev_id_info->major_ver < IQS5XX_MAJOR_VER_MIN) {
dev_err(&client->dev, "Unsupported major version: %u\n",
dev_id_info->major_ver);
return iqs5xx_bl_open(client);
}
switch (dev_id_info->bl_status) {
case IQS5XX_BL_STATUS_AVAIL:
case IQS5XX_BL_STATUS_NONE:
break;
default:
dev_err(&client->dev,
"Unrecognized bootloader status: 0x%02X\n",
dev_id_info->bl_status);
return -EINVAL;
}
error = iqs5xx_axis_init(client);
if (error)
return error;
error = iqs5xx_read_byte(client, IQS5XX_SYS_CFG0, &val);
if (error)
return error;
val |= IQS5XX_SETUP_COMPLETE;
val &= ~IQS5XX_SW_INPUT_EVENT;
error = iqs5xx_write_byte(client, IQS5XX_SYS_CFG0, val);
if (error)
return error;
val = IQS5XX_TP_EVENT | IQS5XX_EVENT_MODE;
error = iqs5xx_write_byte(client, IQS5XX_SYS_CFG1, val);
if (error)
return error;
error = iqs5xx_write_byte(client, IQS5XX_END_COMM, 0);
if (error)
return error;
iqs5xx->bl_status = dev_id_info->bl_status;
/*
* Closure of the first communication window that appears following the
* release of reset appears to kick off an initialization period during
* which further communication is met with clock stretching. The return
* from this function is delayed so that further communication attempts
* avoid this period.
*/
msleep(100);
return 0;
}
static irqreturn_t iqs5xx_irq(int irq, void *data)
{
struct iqs5xx_private *iqs5xx = data;
struct iqs5xx_touch_data touch_data[IQS5XX_NUM_CONTACTS];
struct i2c_client *client = iqs5xx->client;
struct input_dev *input = iqs5xx->input;
int error, i;
/*
* This check is purely a precaution, as the device does not assert the
* RDY output during bootloader mode. If the device operates outside of
* bootloader mode, the input device is guaranteed to be allocated.
*/
if (iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET)
return IRQ_NONE;
error = iqs5xx_read_burst(client, IQS5XX_ABS_X,
touch_data, sizeof(touch_data));
if (error)
return IRQ_NONE;
for (i = 0; i < ARRAY_SIZE(touch_data); i++) {
u16 pressure = be16_to_cpu(touch_data[i].strength);
input_mt_slot(input, i);
if (input_mt_report_slot_state(input, MT_TOOL_FINGER,
pressure != 0)) {
input_report_abs(input, ABS_MT_POSITION_X,
be16_to_cpu(touch_data[i].abs_x));
input_report_abs(input, ABS_MT_POSITION_Y,
be16_to_cpu(touch_data[i].abs_y));
input_report_abs(input, ABS_MT_PRESSURE, pressure);
}
}
input_mt_sync_frame(input);
input_sync(input);
error = iqs5xx_write_byte(client, IQS5XX_END_COMM, 0);
if (error)
return IRQ_NONE;
/*
* Once the communication window is closed, a small delay is added to
* ensure the device's RDY output has been deasserted by the time the
* interrupt handler returns.
*/
usleep_range(50, 100);
return IRQ_HANDLED;
}
static int iqs5xx_fw_file_parse(struct i2c_client *client,
const char *fw_file, u8 *pmap)
{
const struct firmware *fw;
struct iqs5xx_ihex_rec *rec;
size_t pos = 0;
int error, i;
u16 rec_num = 1;
u16 rec_addr;
u8 rec_len, rec_type, rec_chksm, chksm;
u8 rec_hdr[IQS5XX_REC_HDR_LEN];
u8 rec_data[IQS5XX_REC_LEN_MAX];
/*
* Firmware exported from the vendor's configuration tool deviates from
* standard ihex as follows: (1) the checksum for records corresponding
* to user-exported settings is not recalculated, and (2) an address of
* 0xFFFF is used for the EOF record.
*
* Because the ihex2fw tool tolerates neither (1) nor (2), the slightly
* nonstandard ihex firmware is parsed directly by the driver.
*/
error = request_firmware(&fw, fw_file, &client->dev);
if (error) {
dev_err(&client->dev, "Failed to request firmware %s: %d\n",
fw_file, error);
return error;
}
do {
if (pos + sizeof(*rec) > fw->size) {
dev_err(&client->dev, "Insufficient firmware size\n");
error = -EINVAL;
break;
}
rec = (struct iqs5xx_ihex_rec *)(fw->data + pos);
pos += sizeof(*rec);
if (rec->start != ':') {
dev_err(&client->dev, "Invalid start at record %u\n",
rec_num);
error = -EINVAL;
break;
}
error = hex2bin(rec_hdr, rec->len, sizeof(rec_hdr));
if (error) {
dev_err(&client->dev, "Invalid header at record %u\n",
rec_num);
break;
}
rec_len = *rec_hdr;
rec_addr = get_unaligned_be16(rec_hdr + sizeof(rec_len));
rec_type = *(rec_hdr + sizeof(rec_len) + sizeof(rec_addr));
if (pos + rec_len * 2 > fw->size) {
dev_err(&client->dev, "Insufficient firmware size\n");
error = -EINVAL;
break;
}
pos += (rec_len * 2);
error = hex2bin(rec_data, rec->data, rec_len);
if (error) {
dev_err(&client->dev, "Invalid data at record %u\n",
rec_num);
break;
}
error = hex2bin(&rec_chksm,
rec->data + rec_len * 2, sizeof(rec_chksm));
if (error) {
dev_err(&client->dev, "Invalid checksum at record %u\n",
rec_num);
break;
}
chksm = 0;
for (i = 0; i < sizeof(rec_hdr); i++)
chksm += rec_hdr[i];
for (i = 0; i < rec_len; i++)
chksm += rec_data[i];
chksm = ~chksm + 1;
if (chksm != rec_chksm && rec_addr < IQS5XX_CSTM) {
dev_err(&client->dev,
"Incorrect checksum at record %u\n",
rec_num);
error = -EINVAL;
break;
}
switch (rec_type) {
case IQS5XX_REC_TYPE_DATA:
if (rec_addr < IQS5XX_CHKSM ||
rec_addr > IQS5XX_PMAP_END) {
dev_err(&client->dev,
"Invalid address at record %u\n",
rec_num);
error = -EINVAL;
} else {
memcpy(pmap + rec_addr - IQS5XX_CHKSM,
rec_data, rec_len);
}
break;
case IQS5XX_REC_TYPE_EOF:
break;
default:
dev_err(&client->dev, "Invalid type at record %u\n",
rec_num);
error = -EINVAL;
}
if (error)
break;
rec_num++;
while (pos < fw->size) {
if (*(fw->data + pos) == ':')
break;
pos++;
}
} while (rec_type != IQS5XX_REC_TYPE_EOF);
release_firmware(fw);
return error;
}
static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file)
{
struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
int error;
u8 *pmap;
if (iqs5xx->bl_status == IQS5XX_BL_STATUS_NONE)
return -EPERM;
pmap = kzalloc(IQS5XX_PMAP_LEN, GFP_KERNEL);
if (!pmap)
return -ENOMEM;
error = iqs5xx_fw_file_parse(client, fw_file, pmap);
if (error)
goto err_kfree;
mutex_lock(&iqs5xx->lock);
/*
* Disable the interrupt line in case the first attempt(s) to enter the
* bootloader don't happen quickly enough, in which case the device may
* assert the RDY output until the next attempt.
*/
disable_irq(client->irq);
iqs5xx->bl_status = IQS5XX_BL_STATUS_RESET;
error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_VER, 0);
if (error) {
error = iqs5xx_bl_open(client);
if (error)
goto err_reset;
}
error = iqs5xx_bl_write(client, IQS5XX_CHKSM, pmap, IQS5XX_PMAP_LEN);
if (error)
goto err_reset;
error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_CRC, 0);
if (error)
goto err_reset;
error = iqs5xx_bl_verify(client, IQS5XX_CSTM,
pmap + IQS5XX_CHKSM_LEN + IQS5XX_APP_LEN,
IQS5XX_CSTM_LEN);
if (error)
goto err_reset;
error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_EXEC, 0);
err_reset:
if (error) {
iqs5xx_reset(client);
usleep_range(10000, 10100);
}
error = iqs5xx_dev_init(client);
if (!error && iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET)
error = -EINVAL;
enable_irq(client->irq);
mutex_unlock(&iqs5xx->lock);
err_kfree:
kfree(pmap);
return error;
}
static ssize_t fw_file_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev);
struct i2c_client *client = iqs5xx->client;
size_t len = count;
bool input_reg = !iqs5xx->input;
char fw_file[IQS5XX_FW_FILE_LEN + 1];
int error;
if (!len)
return -EINVAL;
if (buf[len - 1] == '\n')
len--;
if (len > IQS5XX_FW_FILE_LEN)
return -ENAMETOOLONG;
memcpy(fw_file, buf, len);
fw_file[len] = '\0';
error = iqs5xx_fw_file_write(client, fw_file);
if (error)
return error;
/*
* If the input device was not allocated already, it is guaranteed to
* be allocated by this point and can finally be registered.
*/
if (input_reg) {
error = input_register_device(iqs5xx->input);
if (error) {
dev_err(&client->dev,
"Failed to register device: %d\n",
error);
return error;
}
}
return count;
}
static DEVICE_ATTR_WO(fw_file);
static struct attribute *iqs5xx_attrs[] = {
&dev_attr_fw_file.attr,
NULL,
};
static const struct attribute_group iqs5xx_attr_group = {
.attrs = iqs5xx_attrs,
};
static int __maybe_unused iqs5xx_suspend(struct device *dev)
{
struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev);
struct input_dev *input = iqs5xx->input;
int error = 0;
if (!input)
return error;
mutex_lock(&input->mutex);
if (input->users)
error = iqs5xx_set_state(iqs5xx->client, IQS5XX_SUSPEND);
mutex_unlock(&input->mutex);
return error;
}
static int __maybe_unused iqs5xx_resume(struct device *dev)
{
struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev);
struct input_dev *input = iqs5xx->input;
int error = 0;
if (!input)
return error;
mutex_lock(&input->mutex);
if (input->users)
error = iqs5xx_set_state(iqs5xx->client, IQS5XX_RESUME);
mutex_unlock(&input->mutex);
return error;
}
static SIMPLE_DEV_PM_OPS(iqs5xx_pm, iqs5xx_suspend, iqs5xx_resume);
static int iqs5xx_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct iqs5xx_private *iqs5xx;
int error;
iqs5xx = devm_kzalloc(&client->dev, sizeof(*iqs5xx), GFP_KERNEL);
if (!iqs5xx)
return -ENOMEM;
dev_set_drvdata(&client->dev, iqs5xx);
i2c_set_clientdata(client, iqs5xx);
iqs5xx->client = client;
iqs5xx->reset_gpio = devm_gpiod_get(&client->dev,
"reset", GPIOD_OUT_LOW);
if (IS_ERR(iqs5xx->reset_gpio)) {
error = PTR_ERR(iqs5xx->reset_gpio);
dev_err(&client->dev, "Failed to request GPIO: %d\n", error);
return error;
}
mutex_init(&iqs5xx->lock);
iqs5xx_reset(client);
usleep_range(10000, 10100);
error = iqs5xx_dev_init(client);
if (error)
return error;
error = devm_request_threaded_irq(&client->dev, client->irq,
NULL, iqs5xx_irq, IRQF_ONESHOT,
client->name, iqs5xx);
if (error) {
dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
return error;
}
error = devm_device_add_group(&client->dev, &iqs5xx_attr_group);
if (error) {
dev_err(&client->dev, "Failed to add attributes: %d\n", error);
return error;
}
if (iqs5xx->input) {
error = input_register_device(iqs5xx->input);
if (error)
dev_err(&client->dev,
"Failed to register device: %d\n",
error);
}
return error;
}
static const struct i2c_device_id iqs5xx_id[] = {
{ "iqs550", 0 },
{ "iqs572", 1 },
{ "iqs525", 2 },
{ }
};
MODULE_DEVICE_TABLE(i2c, iqs5xx_id);
static const struct of_device_id iqs5xx_of_match[] = {
{ .compatible = "azoteq,iqs550" },
{ .compatible = "azoteq,iqs572" },
{ .compatible = "azoteq,iqs525" },
{ }
};
MODULE_DEVICE_TABLE(of, iqs5xx_of_match);
static struct i2c_driver iqs5xx_i2c_driver = {
.driver = {
.name = "iqs5xx",
.of_match_table = iqs5xx_of_match,
.pm = &iqs5xx_pm,
},
.id_table = iqs5xx_id,
.probe = iqs5xx_probe,
};
module_i2c_driver(iqs5xx_i2c_driver);
MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
MODULE_DESCRIPTION("Azoteq IQS550/572/525 Trackpad/Touchscreen Controller");
MODULE_LICENSE("GPL");
......@@ -606,6 +606,7 @@
#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */
#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
#define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */
#define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */
#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment