ARM: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver

Move mmc nodes to be compatible with the sdhci-omap driver. The following
modifications are required for omap_hsmmc specific properties:

ti,non-removable: convert to the generic mmc non-removable
ti,needs-special-reset:  co-opted into the sdhci-omap driver
ti,dual-volt: removed. Legacy property not used in am335x or am43xx
ti,needs-special-hs-handling: removed. Legacy property not used in am335x
or am43xx

Also since the sdhci-omap driver does not support runtime PM, explicitly
disable the mmc3 instance in the dtsi.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am335x-baltos.dtsi

@@ -369,7 +369,7 @@ &mmc1 {
 &mmc2 {
 	status = "okay";
 	vmmc-supply = <&wl12xx_vmmc>;
-	ti,non-removable;
+	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
 	pinctrl-names = "default";

arch/arm/boot/dts/am335x-boneblack-common.dtsi

@@ -22,6 +22,7 @@ &mmc2 {
 	pinctrl-0 = <&emmc_pins>;
 	bus-width = <8>;
 	status = "okay";
+	non-removable;
 };
 
 &am33xx_pinmux {

arch/arm/boot/dts/am335x-boneblack-wireless.dts

@@ -75,7 +75,6 @@ &mmc3 {
 	bus-width = <4>;
 	non-removable;
 	cap-power-off-card;
-	ti,needs-special-hs-handling;
 	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;

arch/arm/boot/dts/am335x-boneblue.dts

@@ -367,7 +367,6 @@ &mmc3 {
 	bus-width = <4>;
 	non-removable;
 	cap-power-off-card;
-	ti,needs-special-hs-handling;
 	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;

arch/arm/boot/dts/am335x-bonegreen-wireless.dts

@@ -75,7 +75,6 @@ &mmc3 {
 	bus-width = <4>;
 	non-removable;
 	cap-power-off-card;
-	ti,needs-special-hs-handling;
 	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;

arch/arm/boot/dts/am335x-evm.dts

@@ -743,8 +743,7 @@ xbar-event-map element */
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &wlan_pins>;
-	ti,non-removable;
-	ti,needs-special-hs-handling;
+	non-removable;
 	cap-power-off-card;
 	keep-power-in-suspend;
 

arch/arm/boot/dts/am335x-evmsk.dts

@@ -655,7 +655,7 @@ &gpio0 {
 &mmc2 {
 	status = "okay";
 	vmmc-supply = <&wl12xx_vmmc>;
-	ti,non-removable;
+	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
 	keep-power-in-suspend;

arch/arm/boot/dts/am335x-lxm.dts

@@ -339,7 +339,7 @@ &mmc2 {
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <8>;
-	ti,non-removable;
+	non-removable;
 	status = "okay";
 };
 

arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi

@@ -159,7 +159,7 @@ &mmc2 {
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <8>;
 	pinctrl-0 = <&mmc1_pins_default>;
-	ti,non-removable;
+	non-removable;
 	status = "okay";
 };
 

arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts

@@ -451,7 +451,7 @@ &mmc3 {
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <8>;
 	pinctrl-0 = <&mmc2_pins_default>;
-	ti,non-removable;
+	non-removable;
 	status = "okay";
 };
 

arch/arm/boot/dts/am335x-pepper.dts

@@ -341,7 +341,7 @@ &mmc2 {
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&ldo3_reg>;
 	bus-width = <8>;
-	ti,non-removable;
+	non-removable;
 };
 
 &mmc3 {
@@ -351,7 +351,7 @@ &mmc3 {
 	pinctrl-0 = <&wireless_pins>;
 	vmmmc-supply = <&v3v3c_reg>;
 	bus-width = <4>;
-	ti,non-removable;
+	non-removable;
 	dmas = <&edma_xbar 12 0 1
 		&edma_xbar 13 0 2>;
 	dma-names = "tx", "rx";

arch/arm/boot/dts/am335x-phycore-som.dtsi

@@ -69,7 +69,7 @@ &mmc2 {
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&vmmc_reg>;
 	bus-width = <8>;
-	ti,non-removable;
+	non-removable;
 	status = "disabled";
 };
 

arch/arm/boot/dts/am33xx-l4.dtsi

@@ -1337,10 +1337,8 @@ SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x60000 0x1000>;
 
 			mmc1: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				ti,dual-volt;
+				compatible = "ti,am335-sdhci";
 				ti,needs-special-reset;
-				ti,needs-special-hs-handling;
 				dmas = <&edma_xbar 24 0 0
 					&edma_xbar 25 0 0>;
 				dma-names = "tx", "rx";
@@ -1818,7 +1816,7 @@ SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0xd8000 0x1000>;
 
 			mmc2: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
+				compatible = "ti,am335-sdhci";
 				ti,needs-special-reset;
 				dmas = <&edma 2 0
 					&edma 3 0>;

arch/arm/boot/dts/am33xx.dtsi

@@ -322,10 +322,11 @@ SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x47810000 0x1000>;
 
 			mmc3: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
+				compatible = "ti,am335-sdhci";
 				ti,needs-special-reset;
 				interrupts = <29>;
 				reg = <0x0 0x1000>;
+				status = "disabled";
 			};
 		};
 

arch/arm/boot/dts/am4372.dtsi

@@ -316,10 +316,11 @@ SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x47810000 0x1000>;
 
 			mmc3: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
+				compatible = "ti,am437-sdhci";
 				ti,needs-special-reset;
 				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x0 0x1000>;
+				status = "disabled";
 			};
 		};
 

arch/arm/boot/dts/am437x-cm-t43.dts

@@ -291,7 +291,7 @@ &mmc2 {
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&vmmc_3v3>;
 	bus-width = <8>;
-	ti,non-removable;
+	non-removable;
 };
 
 &spi0 {

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -869,7 +869,7 @@ &mmc2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&emmc_pins_default>;
 	pinctrl-1 = <&emmc_pins_sleep>;
-	ti,non-removable;
+	non-removable;
 };
 
 &mmc3 {
@@ -886,7 +886,7 @@ xbar-event-map element */
 	pinctrl-1 = <&mmc3_pins_sleep>;
 	cap-power-off-card;
 	keep-power-in-suspend;
-	ti,non-removable;
+	non-removable;
 
 	#address-cells = <1>;
 	#size-cells = <0>;

arch/arm/boot/dts/am437x-l4.dtsi

@@ -1086,9 +1086,8 @@ SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x60000 0x1000>;
 
 			mmc1: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
+				compatible = "ti,am437-sdhci";
 				reg = <0x0 0x1000>;
-				ti,dual-volt;
 				ti,needs-special-reset;
 				dmas = <&edma 24 0>,
 					<&edma 25 0>;
@@ -1601,7 +1600,7 @@ SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0xd8000 0x1000>;
 
 			mmc2: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
+				compatible = "ti,am437-sdhci";
 				reg = <0x0 0x1000>;
 				ti,needs-special-reset;
 				dmas = <&edma 2 0>,

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -719,7 +719,7 @@ &mmc3 {
 	pinctrl-1 = <&mmc3_pins_sleep>;
 	cap-power-off-card;
 	keep-power-in-suspend;
-	ti,non-removable;
+	non-removable;
 
 	#address-cells = <1>;
 	#size-cells = <0>;