Commit 0c7989b9 authored by Alan Stern's avatar Alan Stern Committed by Greg Kroah-Hartman

[PATCH] USB: Add dummy_hcd to the main kernel

This is a resubmission of as225, together with appropriate changes for the
g_serial driver.  David Brownell's latest g_ether update makes it
unnecessary to change that file or gadget_chips.h.



dummy_hcd is simultaneously a host controller driver and a device
controller driver.  It creates a simulated HC together with a simulated
UDC plugged into it.  Gadget drivers can run under the simulated UDC and
will appear as regular USB devices on the simulated HC.  The simulation is
reasonably (although not totally) realistic.

It's a wonderful tool for testing and developing gadget drivers without
the need for lots of additional hardware: Both the host driver and the
gadget driver can run on the same computer.  It's been available for quite
some time in David's gadget-2.6 tree and it works well.  I couldn't have
gotten the file-storage gadget running in any reasonable length of time
without it.
parent d0d4457b
...@@ -134,6 +134,34 @@ config USB_SA1100 ...@@ -134,6 +134,34 @@ config USB_SA1100
depends on USB_GADGET_SA1100 depends on USB_GADGET_SA1100
default USB_GADGET default USB_GADGET
config USB_GADGET_DUMMY_HCD
boolean "Dummy HCD (DEVELOPMENT)"
depends on USB && EXPERIMENTAL
select USB_GADGET_DUALSPEED
help
This host controller driver emulates USB, looping all data transfer
requests back to a USB "gadget driver" in the same host. The host
side is the master; the gadget side is the slave. Gadget drivers
can be high, full, or low speed; and they have access to endpoints
like those from NET2280, PXA2xx, or SA1100 hardware.
This may help in some stages of creating a driver to embed in a
Linux device, since it lets you debug several parts of the gadget
driver without its hardware or drivers being involved.
Since such a gadget side driver needs to interoperate with a host
side Linux-USB device driver, this may help to debug both sides
of a USB protocol stack.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "dummy_hcd" and force all
gadget drivers to also be dynamically linked.
config USB_DUMMY_HCD
tristate
depends on USB_GADGET_DUMMY_HCD
default USB_GADGET
endchoice endchoice
config USB_GADGET_DUALSPEED config USB_GADGET_DUALSPEED
......
# #
# USB peripheral controller drivers # USB peripheral controller drivers
# #
obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
obj-$(CONFIG_USB_NET2280) += net2280.o obj-$(CONFIG_USB_NET2280) += net2280.o
obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o
obj-$(CONFIG_USB_GOKU) += goku_udc.o obj-$(CONFIG_USB_GOKU) += goku_udc.o
......
/*
* dummy_hcd.c -- Dummy/Loopback USB host and device emulator driver.
*
* Maintainer: Alan Stern <stern@rowland.harvard.edu>
*
* Copyright (C) 2003 David Brownell
* Copyright (C) 2003, 2004 Alan Stern
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* This exposes a device side "USB gadget" API, driven by requests to a
* Linux-USB host controller driver. USB traffic is simulated; there's
* no need for USB hardware. Use this with two other drivers:
*
* - Gadget driver, responding to requests (slave);
* - Host-side device driver, as already familiar in Linux.
*
* Having this all in one kernel can help some stages of development,
* bypassing some hardware (and driver) issues. UML could help too.
*/
#define DEBUG
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/version.h>
#include <linux/usb.h>
#include <linux/usb_gadget.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/unaligned.h>
#include "../core/hcd.h"
#define DRIVER_DESC "USB Host+Gadget Emulator"
#define DRIVER_VERSION "14 Mar 2004"
static const char driver_name [] = "dummy_hcd";
static const char driver_desc [] = "USB Host+Gadget Emulator";
MODULE_DESCRIPTION (DRIVER_DESC);
MODULE_AUTHOR ("David Brownell");
MODULE_LICENSE ("GPL");
/*-------------------------------------------------------------------------*/
/* gadget side driver data structres */
struct dummy_ep {
struct list_head queue;
unsigned long last_io; /* jiffies timestamp */
struct usb_gadget *gadget;
const struct usb_endpoint_descriptor *desc;
struct usb_ep ep;
unsigned halted : 1;
unsigned already_seen : 1;
unsigned setup_stage : 1;
};
struct dummy_request {
struct list_head queue; /* ep's requests */
struct usb_request req;
};
/*-------------------------------------------------------------------------*/
/*
* Every device has ep0 for control requests, plus up to 30 more endpoints,
* in one of two types:
*
* - Configurable: direction (in/out), type (bulk, iso, etc), and endpoint
* number can be changed. Names like "ep-a" are used for this type.
*
* - Fixed Function: in other cases. some characteristics may be mutable;
* that'd be hardware-specific. Names like "ep12out-bulk" are used.
*
* Gadget drivers are responsible for not setting up conflicting endpoint
* configurations, illegal or unsupported packet lengths, and so on.
*/
static const char ep0name [] = "ep0";
static const char *const ep_name [] = {
ep0name, /* everyone has ep0 */
/* act like a net2280: high speed, six configurable endpoints */
"ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f",
/* or like pxa250: fifteen fixed function endpoints */
"ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int",
"ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int",
"ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso",
"ep15in-int",
/* or like sa1100: two fixed function endpoints */
"ep1out-bulk", "ep2in-bulk",
};
#define DUMMY_ENDPOINTS (sizeof(ep_name)/sizeof(char *))
#define FIFO_SIZE 64
struct dummy {
spinlock_t lock;
/*
* SLAVE/GADGET side support
*/
struct dummy_ep ep [DUMMY_ENDPOINTS];
int address;
struct usb_gadget gadget;
struct usb_gadget_driver *driver;
struct dummy_request fifo_req;
u8 fifo_buf [FIFO_SIZE];
struct hcd_dev *hdev;
/*
* MASTER/HOST side support
*/
struct usb_hcd hcd;
struct platform_device pdev;
struct timer_list timer;
u32 port_status;
int started;
struct completion released;
};
static struct dummy *the_controller;
static inline struct dummy *ep_to_dummy (struct dummy_ep *ep)
{
return container_of (ep->gadget, struct dummy, gadget);
}
static inline struct dummy *gadget_dev_to_dummy (struct device *dev)
{
return container_of (dev, struct dummy, gadget.dev);
}
/*
* This "hardware" may look a bit odd in diagnostics since it's got both
* host and device sides; and it binds different drivers to each side.
*/
#define hardware (&the_controller->pdev.dev)
/*-------------------------------------------------------------------------*/
static struct device_driver dummy_driver = {
.name = (char *) driver_name,
.bus = &platform_bus_type,
};
/*-------------------------------------------------------------------------*/
/* SLAVE/GADGET SIDE DRIVER
*
* This only tracks gadget state. All the work is done when the host
* side tries some (emulated) i/o operation. Real device controller
* drivers would do real i/o using dma, fifos, irqs, timers, etc.
*/
#define is_enabled() \
(the_controller->port_status & USB_PORT_STAT_ENABLE)
static int
dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
{
struct dummy *dum;
struct dummy_ep *ep;
unsigned max;
int retval;
ep = container_of (_ep, struct dummy_ep, ep);
if (!_ep || !desc || ep->desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT)
if (!the_controller->driver || !is_enabled ())
return -ESHUTDOWN;
max = desc->wMaxPacketSize & 0x3ff;
/* drivers must not request bad settings, since lower levels
* (hardware or its drivers) may not check. some endpoints
* can't do iso, many have maxpacket limitations, etc.
*
* since this "hardware" driver is here to help debugging, we
* have some extra sanity checks. (there could be more though,
* especially for "ep9out" style fixed function ones.)
*/
dum = container_of (ep->gadget, struct dummy, gadget);
retval = -EINVAL;
switch (desc->bmAttributes & 0x03) {
case USB_ENDPOINT_XFER_BULK:
if (strstr (ep->ep.name, "-iso")
|| strstr (ep->ep.name, "-int")) {
goto done;
}
switch (dum->gadget.speed) {
case USB_SPEED_HIGH:
if (max == 512)
break;
/* conserve return statements */
default:
switch (max) {
case 8: case 16: case 32: case 64:
/* we'll fake any legal size */
break;
default:
case USB_SPEED_LOW:
goto done;
}
}
break;
case USB_ENDPOINT_XFER_INT:
if (strstr (ep->ep.name, "-iso")) /* bulk is ok */
goto done;
/* real hardware might not handle all packet sizes */
switch (dum->gadget.speed) {
case USB_SPEED_HIGH:
if (max <= 1024)
break;
/* save a return statement */
case USB_SPEED_FULL:
if (max <= 64)
break;
/* save a return statement */
default:
if (max <= 8)
break;
goto done;
}
break;
case USB_ENDPOINT_XFER_ISOC:
if (strstr (ep->ep.name, "-bulk")
|| strstr (ep->ep.name, "-int"))
goto done;
/* real hardware might not handle all packet sizes */
switch (dum->gadget.speed) {
case USB_SPEED_HIGH:
if (max <= 1024)
break;
/* save a return statement */
case USB_SPEED_FULL:
if (max <= 1023)
break;
/* save a return statement */
default:
goto done;
}
break;
default:
/* few chips support control except on ep0 */
goto done;
}
_ep->maxpacket = max;
ep->desc = desc;
dev_dbg (hardware, "enabled %s (ep%d%s-%s) maxpacket %d\n",
_ep->name,
desc->bEndpointAddress & 0x0f,
(desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
({ char *val;
switch (desc->bmAttributes & 0x03) {
case USB_ENDPOINT_XFER_BULK: val = "bulk"; break;
case USB_ENDPOINT_XFER_ISOC: val = "iso"; break;
case USB_ENDPOINT_XFER_INT: val = "intr"; break;
default: val = "ctrl"; break;
}; val; }),
max);
/* at this point real hardware should be NAKing transfers
* to that endpoint, until a buffer is queued to it.
*/
retval = 0;
done:
return retval;
}
/* called with spinlock held */
static void nuke (struct dummy *dum, struct dummy_ep *ep)
{
while (!list_empty (&ep->queue)) {
struct dummy_request *req;
req = list_entry (ep->queue.next, struct dummy_request, queue);
list_del_init (&req->queue);
req->req.status = -ESHUTDOWN;
spin_unlock (&dum->lock);
req->req.complete (&ep->ep, &req->req);
spin_lock (&dum->lock);
}
}
static int dummy_disable (struct usb_ep *_ep)
{
struct dummy_ep *ep;
struct dummy *dum;
unsigned long flags;
int retval;
ep = container_of (_ep, struct dummy_ep, ep);
if (!_ep || !ep->desc || _ep->name == ep0name)
return -EINVAL;
dum = ep_to_dummy (ep);
spin_lock_irqsave (&dum->lock, flags);
ep->desc = 0;
retval = 0;
nuke (dum, ep);
spin_unlock_irqrestore (&dum->lock, flags);
dev_dbg (hardware, "disabled %s\n", _ep->name);
return retval;
}
static struct usb_request *
dummy_alloc_request (struct usb_ep *_ep, int mem_flags)
{
struct dummy_ep *ep;
struct dummy_request *req;
ep = container_of (_ep, struct dummy_ep, ep);
if (!_ep)
return 0;
req = kmalloc (sizeof *req, mem_flags);
if (!req)
return 0;
memset (req, 0, sizeof *req);
INIT_LIST_HEAD (&req->queue);
return &req->req;
}
static void
dummy_free_request (struct usb_ep *_ep, struct usb_request *_req)
{
struct dummy_ep *ep;
struct dummy_request *req;
ep = container_of (_ep, struct dummy_ep, ep);
if (!ep || !_req || (!ep->desc && _ep->name != ep0name))
return;
req = container_of (_req, struct dummy_request, req);
WARN_ON (!list_empty (&req->queue));
kfree (req);
}
static void *
dummy_alloc_buffer (
struct usb_ep *_ep,
unsigned bytes,
dma_addr_t *dma,
int mem_flags
) {
char *retval;
if (!the_controller->driver)
return 0;
retval = kmalloc (bytes, mem_flags);
*dma = (dma_addr_t) retval;
return retval;
}
static void
dummy_free_buffer (
struct usb_ep *_ep,
void *buf,
dma_addr_t dma,
unsigned bytes
) {
if (bytes)
kfree (buf);
}
static void
fifo_complete (struct usb_ep *ep, struct usb_request *req)
{
#if 0
dev_dbg (hardware, "fifo_complete: %d\n", req->status);
#endif
}
static int
dummy_queue (struct usb_ep *_ep, struct usb_request *_req, int mem_flags)
{
struct dummy_ep *ep;
struct dummy_request *req;
struct dummy *dum;
unsigned long flags;
req = container_of (_req, struct dummy_request, req);
if (!_req || !list_empty (&req->queue) || !_req->complete)
return -EINVAL;
ep = container_of (_ep, struct dummy_ep, ep);
if (!_ep || (!ep->desc && _ep->name != ep0name))
return -EINVAL;
if (!the_controller->driver || !is_enabled ())
return -ESHUTDOWN;
dum = container_of (ep->gadget, struct dummy, gadget);
#if 0
dev_dbg (hardware, "ep %p queue req %p to %s, len %d buf %p\n",
ep, _req, _ep->name, _req->length, _req->buf);
#endif
_req->status = -EINPROGRESS;
_req->actual = 0;
spin_lock_irqsave (&dum->lock, flags);
/* implement an emulated single-request FIFO */
if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
list_empty (&dum->fifo_req.queue) &&
list_empty (&ep->queue) &&
_req->length <= FIFO_SIZE) {
req = &dum->fifo_req;
req->req = *_req;
req->req.buf = dum->fifo_buf;
memcpy (dum->fifo_buf, _req->buf, _req->length);
req->req.context = dum;
req->req.complete = fifo_complete;
spin_unlock (&dum->lock);
_req->actual = _req->length;
_req->status = 0;
_req->complete (_ep, _req);
spin_lock (&dum->lock);
}
list_add_tail (&req->queue, &ep->queue);
spin_unlock_irqrestore (&dum->lock, flags);
/* real hardware would likely enable transfers here, in case
* it'd been left NAKing.
*/
return 0;
}
static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req)
{
struct dummy_ep *ep;
struct dummy *dum;
int retval = -EINVAL;
unsigned long flags;
struct dummy_request *req = 0;
if (!the_controller->driver)
return -ESHUTDOWN;
if (!_ep || !_req)
return retval;
ep = container_of (_ep, struct dummy_ep, ep);
dum = container_of (ep->gadget, struct dummy, gadget);
spin_lock_irqsave (&dum->lock, flags);
list_for_each_entry (req, &ep->queue, queue) {
if (&req->req == _req) {
list_del_init (&req->queue);
_req->status = -ECONNRESET;
retval = 0;
break;
}
}
spin_unlock_irqrestore (&dum->lock, flags);
if (retval == 0) {
dev_dbg (hardware, "dequeued req %p from %s, len %d buf %p\n",
req, _ep->name, _req->length, _req->buf);
_req->complete (_ep, _req);
}
return retval;
}
static int
dummy_set_halt (struct usb_ep *_ep, int value)
{
struct dummy_ep *ep;
if (!_ep)
return -EINVAL;
if (!the_controller->driver)
return -ESHUTDOWN;
ep = container_of (_ep, struct dummy_ep, ep);
if (!value)
ep->halted = 0;
else if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
!list_empty (&ep->queue))
return -EAGAIN;
else
ep->halted = 1;
/* FIXME clear emulated data toggle too */
return 0;
}
static const struct usb_ep_ops dummy_ep_ops = {
.enable = dummy_enable,
.disable = dummy_disable,
.alloc_request = dummy_alloc_request,
.free_request = dummy_free_request,
.alloc_buffer = dummy_alloc_buffer,
.free_buffer = dummy_free_buffer,
/* map, unmap, ... eventually hook the "generic" dma calls */
.queue = dummy_queue,
.dequeue = dummy_dequeue,
.set_halt = dummy_set_halt,
};
/*-------------------------------------------------------------------------*/
/* there are both host and device side versions of this call ... */
static int dummy_g_get_frame (struct usb_gadget *_gadget)
{
struct timeval tv;
do_gettimeofday (&tv);
return tv.tv_usec / 1000;
}
static const struct usb_gadget_ops dummy_ops = {
.get_frame = dummy_g_get_frame,
};
/*-------------------------------------------------------------------------*/
/* "function" sysfs attribute */
static ssize_t
show_function (struct device *_dev, char *buf)
{
struct dummy *dum = the_controller;
if (!dum->driver->function
|| strlen (dum->driver->function) > PAGE_SIZE)
return 0;
return snprintf (buf, PAGE_SIZE, "%s\n", dum->driver->function);
}
DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
/*-------------------------------------------------------------------------*/
/*
* Driver registration/unregistration.
*
* This is basically hardware-specific; there's usually only one real USB
* device (not host) controller since that's how USB devices are intended
* to work. So most implementations of these api calls will rely on the
* fact that only one driver will ever bind to the hardware. But curious
* hardware can be built with discrete components, so the gadget API doesn't
* require that assumption.
*
* For this emulator, it might be convenient to create a usb slave device
* for each driver that registers: just add to a big root hub.
*/
static void
dummy_udc_release (struct device *dev)
{
struct dummy *dum = gadget_dev_to_dummy (dev);
complete (&dum->released);
}
static void
dummy_hc_release (struct device *dev)
{
struct dummy *dum = dev_get_drvdata (dev);
complete (&dum->released);
}
static int
dummy_register_udc (struct dummy *dum)
{
int rc;
strcpy (dum->gadget.dev.bus_id, "udc");
dum->gadget.dev.parent = &dum->pdev.dev;
dum->gadget.dev.release = dummy_udc_release;
rc = device_register (&dum->gadget.dev);
if (rc == 0)
device_create_file (&dum->gadget.dev, &dev_attr_function);
return rc;
}
static void
dummy_unregister_udc (struct dummy *dum)
{
device_remove_file (&dum->gadget.dev, &dev_attr_function);
init_completion (&dum->released);
device_unregister (&dum->gadget.dev);
wait_for_completion (&dum->released);
}
int
usb_gadget_register_driver (struct usb_gadget_driver *driver)
{
struct dummy *dum = the_controller;
int retval, i;
if (!dum)
return -EINVAL;
if (dum->driver)
return -EBUSY;
if (!driver->bind || !driver->unbind || !driver->setup
|| driver->speed == USB_SPEED_UNKNOWN)
return -EINVAL;
/*
* SLAVE side init ... the layer above hardware, which
* can't enumerate without help from the driver we're binding.
*/
dum->gadget.name = driver_name;
dum->gadget.ops = &dummy_ops;
dum->gadget.is_dualspeed = 1;
INIT_LIST_HEAD (&dum->gadget.ep_list);
for (i = 0; i < DUMMY_ENDPOINTS; i++) {
struct dummy_ep *ep = &dum->ep [i];
if (!ep_name [i])
break;
ep->ep.name = ep_name [i];
ep->ep.ops = &dummy_ep_ops;
list_add_tail (&ep->ep.ep_list, &dum->gadget.ep_list);
ep->halted = ep->already_seen = ep->setup_stage = 0;
ep->ep.maxpacket = ~0;
ep->last_io = jiffies;
ep->gadget = &dum->gadget;
ep->desc = 0;
INIT_LIST_HEAD (&ep->queue);
}
dum->gadget.ep0 = &dum->ep [0].ep;
dum->ep [0].ep.maxpacket = 64;
list_del_init (&dum->ep [0].ep.ep_list);
INIT_LIST_HEAD(&dum->fifo_req.queue);
dum->driver = driver;
dum->gadget.dev.driver = &driver->driver;
dev_dbg (hardware, "binding gadget driver '%s'\n", driver->driver.name);
if ((retval = driver->bind (&dum->gadget)) != 0) {
dum->driver = 0;
dum->gadget.dev.driver = 0;
return retval;
}
// FIXME: Check these calls for errors and re-order
driver->driver.bus = dum->pdev.dev.bus;
driver_register (&driver->driver);
device_bind_driver (&dum->gadget.dev);
/* khubd will enumerate this in a while */
dum->port_status |= USB_PORT_STAT_CONNECTION
| (1 << USB_PORT_FEAT_C_CONNECTION);
return 0;
}
EXPORT_SYMBOL (usb_gadget_register_driver);
/* caller must hold lock */
static void
stop_activity (struct dummy *dum, struct usb_gadget_driver *driver)
{
struct dummy_ep *ep;
/* prevent any more requests */
dum->hdev = 0;
dum->address = 0;
/* this might not succeed ... */
del_timer (&dum->timer);
/* nuke any pending requests first, so driver i/o is quiesced */
list_for_each_entry (ep, &dum->gadget.ep_list, ep.ep_list)
nuke (dum, ep);
/* driver now does any non-usb quiescing necessary */
if (driver) {
spin_unlock (&dum->lock);
driver->disconnect (&dum->gadget);
spin_lock (&dum->lock);
}
}
int
usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
{
struct dummy *dum = the_controller;
unsigned long flags;
if (!dum)
return -ENODEV;
if (!driver || driver != dum->driver)
return -EINVAL;
dev_dbg (hardware, "unregister gadget driver '%s'\n",
driver->driver.name);
spin_lock_irqsave (&dum->lock, flags);
stop_activity (dum, driver);
dum->port_status &= ~USB_PORT_STAT_CONNECTION;
dum->port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
spin_unlock_irqrestore (&dum->lock, flags);
driver->unbind (&dum->gadget);
dum->driver = 0;
device_release_driver (&dum->gadget.dev);
driver_unregister (&driver->driver);
del_timer_sync (&dum->timer);
return 0;
}
EXPORT_SYMBOL (usb_gadget_unregister_driver);
#undef is_enabled
int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode)
{
return -ENOSYS;
}
EXPORT_SYMBOL (net2280_set_fifo_mode);
/*-------------------------------------------------------------------------*/
/* MASTER/HOST SIDE DRIVER
*
* this uses the hcd framework to hook up to host side drivers.
* its root hub will only have one device, otherwise it acts like
* a normal host controller.
*
* when urbs are queued, they're just stuck on a list that we
* scan in a timer callback. that callback connects writes from
* the host with reads from the device, and so on, based on the
* usb 2.0 rules.
*/
static int dummy_urb_enqueue (
struct usb_hcd *hcd,
struct urb *urb,
int mem_flags
) {
struct dummy *dum;
unsigned long flags;
/* patch to usb_sg_init() is in 2.5.60 */
BUG_ON (!urb->transfer_buffer && urb->transfer_buffer_length);
dum = container_of (hcd, struct dummy, hcd);
spin_lock_irqsave (&dum->lock, flags);
if (!dum->hdev)
dum->hdev = urb->dev->hcpriv;
urb->hcpriv = dum;
if (usb_pipetype (urb->pipe) == PIPE_CONTROL)
urb->error_count = 1; /* mark as a new urb */
/* kick the scheduler, it'll do the rest */
if (!timer_pending (&dum->timer))
mod_timer (&dum->timer, jiffies + 1);
spin_unlock_irqrestore (&dum->lock, flags);
return 0;
}
static int dummy_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
{
/* giveback happens automatically in timer callback */
return 0;
}
static void maybe_set_status (struct urb *urb, int status)
{
spin_lock (&urb->lock);
if (urb->status == -EINPROGRESS)
urb->status = status;
spin_unlock (&urb->lock);
}
/* transfer up to a frame's worth; caller must own lock */
static int
transfer (struct dummy *dum, struct urb *urb, struct dummy_ep *ep, int limit)
{
struct dummy_request *req;
top:
/* if there's no request queued, the device is NAKing; return */
list_for_each_entry (req, &ep->queue, queue) {
unsigned host_len, dev_len, len;
int is_short, to_host;
int rescan = 0;
/* 1..N packets of ep->ep.maxpacket each ... the last one
* may be short (including zero length).
*
* writer can send a zlp explicitly (length 0) or implicitly
* (length mod maxpacket zero, and 'zero' flag); they always
* terminate reads.
*/
host_len = urb->transfer_buffer_length - urb->actual_length;
dev_len = req->req.length - req->req.actual;
len = min (host_len, dev_len);
/* FIXME update emulated data toggle too */
to_host = usb_pipein (urb->pipe);
if (unlikely (len == 0))
is_short = 1;
else {
char *ubuf, *rbuf;
/* not enough bandwidth left? */
if (limit < ep->ep.maxpacket && limit < len)
break;
len = min (len, (unsigned) limit);
if (len == 0)
break;
/* use an extra pass for the final short packet */
if (len > ep->ep.maxpacket) {
rescan = 1;
len -= (len % ep->ep.maxpacket);
}
is_short = (len % ep->ep.maxpacket) != 0;
/* else transfer packet(s) */
ubuf = urb->transfer_buffer + urb->actual_length;
rbuf = req->req.buf + req->req.actual;
if (to_host)
memcpy (ubuf, rbuf, len);
else
memcpy (rbuf, ubuf, len);
ep->last_io = jiffies;
limit -= len;
urb->actual_length += len;
req->req.actual += len;
}
/* short packets terminate, maybe with overflow/underflow.
* it's only really an error to write too much.
*
* partially filling a buffer optionally blocks queue advances
* (so completion handlers can clean up the queue) but we don't
* need to emulate such data-in-flight. so we only show part
* of the URB_SHORT_NOT_OK effect: completion status.
*/
if (is_short) {
if (host_len == dev_len) {
req->req.status = 0;
maybe_set_status (urb, 0);
} else if (to_host) {
req->req.status = 0;
if (dev_len > host_len)
maybe_set_status (urb, -EOVERFLOW);
else
maybe_set_status (urb,
(urb->transfer_flags
& URB_SHORT_NOT_OK)
? -EREMOTEIO : 0);
} else if (!to_host) {
maybe_set_status (urb, 0);
if (host_len > dev_len)
req->req.status = -EOVERFLOW;
else
req->req.status = 0;
}
/* many requests terminate without a short packet */
} else {
if (req->req.length == req->req.actual
&& !req->req.zero)
req->req.status = 0;
if (urb->transfer_buffer_length == urb->actual_length
&& !(urb->transfer_flags
& URB_ZERO_PACKET)) {
maybe_set_status (urb, 0);
}
}
/* device side completion --> continuable */
if (req->req.status != -EINPROGRESS) {
list_del_init (&req->queue);
spin_unlock (&dum->lock);
req->req.complete (&ep->ep, &req->req);
spin_lock (&dum->lock);
/* requests might have been unlinked... */
rescan = 1;
}
/* host side completion --> terminate */
if (urb->status != -EINPROGRESS)
break;
/* rescan to continue with any other queued i/o */
if (rescan)
goto top;
}
return limit;
}
static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep)
{
int limit = ep->ep.maxpacket;
if (dum->gadget.speed == USB_SPEED_HIGH) {
int tmp;
/* high bandwidth mode */
tmp = ep->desc->wMaxPacketSize;
tmp = le16_to_cpu (tmp);
tmp = (tmp >> 11) & 0x03;
tmp *= 8 /* applies to entire frame */;
limit += limit * tmp;
}
return limit;
}
static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
{
int i;
if ((address & ~USB_DIR_IN) == 0)
return &dum->ep [0];
for (i = 1; i < DUMMY_ENDPOINTS; i++) {
struct dummy_ep *ep = &dum->ep [i];
if (!ep->desc)
continue;
if (ep->desc->bEndpointAddress == address)
return ep;
}
return NULL;
}
#define Dev_Request (USB_TYPE_STANDARD | USB_RECIP_DEVICE)
#define Dev_InRequest (Dev_Request | USB_DIR_IN)
#define Intf_Request (USB_TYPE_STANDARD | USB_RECIP_INTERFACE)
#define Intf_InRequest (Intf_Request | USB_DIR_IN)
#define Ep_Request (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT)
#define Ep_InRequest (Ep_Request | USB_DIR_IN)
/* drive both sides of the transfers; looks like irq handlers to
* both drivers except the callbacks aren't in_irq().
*/
static void dummy_timer (unsigned long _dum)
{
struct dummy *dum = (struct dummy *) _dum;
struct hcd_dev *hdev = dum->hdev;
struct list_head *entry, *tmp;
unsigned long flags;
int limit, total;
int i;
if (!hdev) {
dev_err (hardware, "timer fired with device gone?\n");
return;
}
/* simplistic model for one frame's bandwidth */
switch (dum->gadget.speed) {
case USB_SPEED_LOW:
total = 8/*bytes*/ * 12/*packets*/;
break;
case USB_SPEED_FULL:
total = 64/*bytes*/ * 19/*packets*/;
break;
case USB_SPEED_HIGH:
total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/;
break;
default:
dev_err (hardware, "bogus device speed\n");
return;
}
/* FIXME if HZ != 1000 this will probably misbehave ... */
/* look at each urb queued by the host side driver */
spin_lock_irqsave (&dum->lock, flags);
for (i = 0; i < DUMMY_ENDPOINTS; i++) {
if (!ep_name [i])
break;
dum->ep [i].already_seen = 0;
}
restart:
list_for_each_safe (entry, tmp, &hdev->urb_list) {
struct urb *urb;
struct dummy_request *req;
u8 address;
struct dummy_ep *ep = 0;
int type;
urb = list_entry (entry, struct urb, urb_list);
if (urb->status != -EINPROGRESS) {
/* likely it was just unlinked */
goto return_urb;
}
type = usb_pipetype (urb->pipe);
/* used up this frame's non-periodic bandwidth?
* FIXME there's infinite bandwidth for control and
* periodic transfers ... unrealistic.
*/
if (total <= 0 && type == PIPE_BULK)
continue;
/* find the gadget's ep for this request (if configured) */
address = usb_pipeendpoint (urb->pipe);
if (usb_pipein (urb->pipe))
address |= USB_DIR_IN;
ep = find_endpoint(dum, address);
if (!ep) {
/* set_configuration() disagreement */
dev_err (hardware,
"no ep configured for urb %p\n",
urb);
maybe_set_status (urb, -ETIMEDOUT);
goto return_urb;
}
if (ep->already_seen)
continue;
ep->already_seen = 1;
if (ep == &dum->ep [0] && urb->error_count) {
ep->setup_stage = 1; /* a new urb */
urb->error_count = 0;
}
if (ep->halted && !ep->setup_stage) {
/* NOTE: must not be iso! */
dev_dbg (hardware, "ep %s halted, urb %p\n",
ep->ep.name, urb);
maybe_set_status (urb, -EPIPE);
goto return_urb;
}
/* FIXME make sure both ends agree on maxpacket */
/* handle control requests */
if (ep == &dum->ep [0] && ep->setup_stage) {
struct usb_ctrlrequest setup;
int value = 1;
struct dummy_ep *ep2;
setup = *(struct usb_ctrlrequest*) urb->setup_packet;
le16_to_cpus (&setup.wIndex);
le16_to_cpus (&setup.wValue);
le16_to_cpus (&setup.wLength);
if (setup.wLength != urb->transfer_buffer_length) {
maybe_set_status (urb, -EOVERFLOW);
goto return_urb;
}
/* paranoia, in case of stale queued data */
list_for_each_entry (req, &ep->queue, queue) {
list_del_init (&req->queue);
req->req.status = -EOVERFLOW;
dev_dbg (hardware, "stale req = %p\n", req);
spin_unlock (&dum->lock);
req->req.complete (&ep->ep, &req->req);
spin_lock (&dum->lock);
ep->already_seen = 0;
goto restart;
}
/* gadget driver never sees set_address or operations
* on standard feature flags. some hardware doesn't
* even expose them.
*/
ep->last_io = jiffies;
ep->setup_stage = 0;
ep->halted = 0;
switch (setup.bRequest) {
case USB_REQ_SET_ADDRESS:
if (setup.bRequestType != Dev_Request)
break;
if (dum->address != 0) {
maybe_set_status (urb, -ETIMEDOUT);
urb->actual_length = 0;
goto return_urb;
}
dum->address = setup.wValue;
maybe_set_status (urb, 0);
dev_dbg (hardware, "set_address = %d\n",
setup.wValue);
value = 0;
break;
case USB_REQ_SET_FEATURE:
if (setup.bRequestType == Dev_Request) {
// remote wakeup, and (hs) test mode
value = -EOPNOTSUPP;
} else if (setup.bRequestType == Ep_Request) {
// endpoint halt
ep2 = find_endpoint (dum,
setup.wIndex);
if (!ep2) {
value = -EOPNOTSUPP;
break;
}
ep2->halted = 1;
value = 0;
maybe_set_status (urb, 0);
}
break;
case USB_REQ_CLEAR_FEATURE:
if (setup.bRequestType == Dev_Request) {
// remote wakeup
value = 0;
maybe_set_status (urb, 0);
} else if (setup.bRequestType == Ep_Request) {
// endpoint halt
ep2 = find_endpoint (dum,
setup.wIndex);
if (!ep2) {
value = -EOPNOTSUPP;
break;
}
ep2->halted = 0;
value = 0;
maybe_set_status (urb, 0);
}
break;
case USB_REQ_GET_STATUS:
if (setup.bRequestType == Dev_InRequest
|| setup.bRequestType
== Intf_InRequest
|| setup.bRequestType
== Ep_InRequest
) {
char *buf;
// device: remote wakeup, selfpowered
// interface: nothing
// endpoint: halt
buf = (char *)urb->transfer_buffer;
if (urb->transfer_buffer_length > 0) {
if (setup.bRequestType ==
Ep_InRequest) {
ep2 = find_endpoint (dum, setup.wIndex);
if (!ep2) {
value = -EOPNOTSUPP;
break;
}
buf [0] = ep2->halted;
} else
buf [0] = 0;
}
if (urb->transfer_buffer_length > 1)
buf [1] = 0;
urb->actual_length = min (2,
urb->transfer_buffer_length);
value = 0;
maybe_set_status (urb, 0);
}
break;
}
/* gadget driver handles all other requests. block
* until setup() returns; no reentrancy issues etc.
*/
if (value > 0) {
spin_unlock (&dum->lock);
value = dum->driver->setup (&dum->gadget,
&setup);
spin_lock (&dum->lock);
if (value >= 0) {
/* no delays (max 64KB data stage) */
limit = 64*1024;
goto treat_control_like_bulk;
}
/* error, see below */
}
if (value < 0) {
if (value != -EOPNOTSUPP)
dev_dbg (hardware,
"setup --> %d\n",
value);
maybe_set_status (urb, -EPIPE);
urb->actual_length = 0;
}
goto return_urb;
}
/* non-control requests */
limit = total;
switch (usb_pipetype (urb->pipe)) {
case PIPE_ISOCHRONOUS:
/* FIXME is it urb->interval since the last xfer?
* use urb->iso_frame_desc[i].
* complete whether or not ep has requests queued.
* report random errors, to debug drivers.
*/
limit = max (limit, periodic_bytes (dum, ep));
maybe_set_status (urb, -ENOSYS);
break;
case PIPE_INTERRUPT:
/* FIXME is it urb->interval since the last xfer?
* this almost certainly polls too fast.
*/
limit = max (limit, periodic_bytes (dum, ep));
/* FALLTHROUGH */
// case PIPE_BULK: case PIPE_CONTROL:
default:
treat_control_like_bulk:
ep->last_io = jiffies;
total = transfer (dum, urb, ep, limit);
break;
}
/* incomplete transfer? */
if (urb->status == -EINPROGRESS)
continue;
return_urb:
urb->hcpriv = 0;
if (ep)
ep->already_seen = ep->setup_stage = 0;
spin_unlock (&dum->lock);
usb_hcd_giveback_urb (&dum->hcd, urb, 0);
spin_lock (&dum->lock);
goto restart;
}
/* want a 1 msec delay here */
if (!list_empty (&hdev->urb_list))
mod_timer (&dum->timer, jiffies + 1);
spin_unlock_irqrestore (&dum->lock, flags);
}
/*-------------------------------------------------------------------------*/
#define PORT_C_MASK \
((1 << USB_PORT_FEAT_C_CONNECTION) \
| (1 << USB_PORT_FEAT_C_ENABLE) \
| (1 << USB_PORT_FEAT_C_SUSPEND) \
| (1 << USB_PORT_FEAT_C_OVER_CURRENT) \
| (1 << USB_PORT_FEAT_C_RESET))
static int dummy_hub_status (struct usb_hcd *hcd, char *buf)
{
struct dummy *dum;
unsigned long flags;
int retval;
dum = container_of (hcd, struct dummy, hcd);
spin_lock_irqsave (&dum->lock, flags);
if (!(dum->port_status & PORT_C_MASK))
retval = 0;
else {
*buf = (1 << 1);
dev_dbg (hardware, "port status 0x%08x has changes\n",
dum->port_status);
retval = 1;
}
spin_unlock_irqrestore (&dum->lock, flags);
return retval;
}
static inline void
hub_descriptor (struct usb_hub_descriptor *desc)
{
memset (desc, 0, sizeof *desc);
desc->bDescriptorType = 0x29;
desc->bDescLength = 9;
desc->wHubCharacteristics = __constant_cpu_to_le16 (0x0001);
desc->bNbrPorts = 1;
desc->bitmap [0] = 0xff;
desc->bitmap [1] = 0xff;
}
static int dummy_hub_control (
struct usb_hcd *hcd,
u16 typeReq,
u16 wValue,
u16 wIndex,
char *buf,
u16 wLength
) {
struct dummy *dum;
int retval = 0;
unsigned long flags;
dum = container_of (hcd, struct dummy, hcd);
spin_lock_irqsave (&dum->lock, flags);
switch (typeReq) {
case ClearHubFeature:
break;
case ClearPortFeature:
// FIXME won't some of these need special handling?
dum->port_status &= ~(1 << wValue);
break;
case GetHubDescriptor:
hub_descriptor ((struct usb_hub_descriptor *) buf);
break;
case GetHubStatus:
*(u32 *) buf = __constant_cpu_to_le32 (0);
break;
case GetPortStatus:
if (wIndex != 1)
retval = -EPIPE;
((u16 *) buf)[0] = cpu_to_le16 (dum->port_status);
((u16 *) buf)[1] = cpu_to_le16 (dum->port_status >> 16);
break;
case SetHubFeature:
retval = -EPIPE;
break;
case SetPortFeature:
if (wValue == USB_PORT_FEAT_RESET) {
/* if it's already running, disconnect first */
if (dum->port_status & USB_PORT_STAT_ENABLE) {
dum->port_status &= ~(USB_PORT_STAT_ENABLE
| USB_PORT_STAT_LOW_SPEED
| USB_PORT_STAT_HIGH_SPEED);
if (dum->driver) {
dev_dbg (hardware, "disconnect\n");
stop_activity (dum, dum->driver);
}
/* FIXME test that code path! */
} else
dum->port_status |=
(1 << USB_PORT_FEAT_C_ENABLE);
dum->port_status |= USB_PORT_STAT_ENABLE |
(1 << USB_PORT_FEAT_C_RESET);
if (dum->driver) {
/* give it the best speed we agree on */
dum->gadget.speed = dum->driver->speed;
dum->gadget.ep0->maxpacket = 64;
switch (dum->gadget.speed) {
case USB_SPEED_HIGH:
dum->port_status |=
USB_PORT_STAT_HIGH_SPEED;
break;
case USB_SPEED_LOW:
dum->gadget.ep0->maxpacket = 8;
dum->port_status |=
USB_PORT_STAT_LOW_SPEED;
break;
default:
dum->gadget.speed = USB_SPEED_FULL;
break;
}
}
} else
dum->port_status |= (1 << wValue);
break;
default:
dev_dbg (hardware,
"hub control req%04x v%04x i%04x l%d\n",
typeReq, wValue, wIndex, wLength);
/* "protocol stall" on error */
retval = -EPIPE;
}
spin_unlock_irqrestore (&dum->lock, flags);
return retval;
}
/*-------------------------------------------------------------------------*/
static struct usb_hcd *dummy_alloc (void)
{
struct dummy *dum;
dum = kmalloc (sizeof *dum, SLAB_KERNEL);
if (dum == NULL)
return 0;
memset (dum, 0, sizeof *dum);
return &dum->hcd;
}
static void dummy_free (struct usb_hcd *hcd)
{
struct dummy *dum;
dum = container_of (hcd, struct dummy, hcd);
WARN_ON (dum->driver != 0);
kfree (dum);
}
/*-------------------------------------------------------------------------*/
static inline ssize_t
show_urb (char *buf, size_t size, struct urb *urb)
{
int ep = usb_pipeendpoint (urb->pipe);
return snprintf (buf, size,
"urb/%p %s ep%d%s%s len %d/%d\n",
urb,
({ char *s;
switch (urb->dev->speed) {
case USB_SPEED_LOW: s = "ls"; break;
case USB_SPEED_FULL: s = "fs"; break;
case USB_SPEED_HIGH: s = "hs"; break;
default: s = "?"; break;
}; s; }),
ep, ep ? (usb_pipein (urb->pipe) ? "in" : "out") : "",
({ char *s; \
switch (usb_pipetype (urb->pipe)) { \
case PIPE_CONTROL: s = ""; break; \
case PIPE_BULK: s = "-bulk"; break; \
case PIPE_INTERRUPT: s = "-int"; break; \
default: s = "-iso"; break; \
}; s;}),
urb->actual_length, urb->transfer_buffer_length);
}
static ssize_t
show_urbs (struct device *dev, char *buf)
{
struct dummy *dum = dev_get_drvdata(dev);
struct urb *urb;
size_t size = 0;
unsigned long flags;
spin_lock_irqsave (&dum->lock, flags);
if (dum->hdev) {
list_for_each_entry (urb, &dum->hdev->urb_list, urb_list) {
size_t temp;
temp = show_urb (buf, PAGE_SIZE - size, urb);
buf += temp;
size += temp;
}
}
spin_unlock_irqrestore (&dum->lock, flags);
return size;
}
static DEVICE_ATTR (urbs, S_IRUGO, show_urbs, NULL);
static const struct hc_driver dummy_hcd;
static int dummy_start (struct usb_hcd *hcd)
{
struct dummy *dum;
struct usb_bus *bus;
struct usb_device *root;
int retval;
dum = container_of (hcd, struct dummy, hcd);
/*
* MASTER side init ... we emulate a root hub that'll only ever
* talk to one device (the slave side). Also appears in sysfs,
* just like more familiar pci-based HCDs.
*/
spin_lock_init (&dum->lock);
retval = driver_register (&dummy_driver);
if (retval < 0)
return retval;
dum->pdev.name = "hc";
dum->pdev.dev.driver = &dummy_driver;
dev_set_drvdata(&dum->pdev.dev, dum);
dum->pdev.dev.release = dummy_hc_release;
retval = platform_device_register (&dum->pdev);
if (retval < 0) {
driver_unregister (&dummy_driver);
return retval;
}
dev_info (&dum->pdev.dev, "%s, driver " DRIVER_VERSION "\n",
driver_desc);
hcd->self.controller = &dum->pdev.dev;
/* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
device_create_file (hcd->self.controller, &dev_attr_urbs);
init_timer (&dum->timer);
dum->timer.function = dummy_timer;
dum->timer.data = (unsigned long) dum;
/* root hub will appear as another device */
dum->hcd.driver = (struct hc_driver *) &dummy_hcd;
dum->hcd.description = dummy_hcd.description;
dum->hcd.product_desc = "Dummy host controller";
bus = hcd_to_bus (&dum->hcd);
bus->bus_name = dum->pdev.dev.bus_id;
usb_bus_init (bus);
bus->op = &usb_hcd_operations;
bus->hcpriv = &dum->hcd;
/* FIXME don't require the pci-based buffer/alloc impls;
* the "generic dma" implementation still requires them,
* it's not very generic yet.
*/
if ((retval = hcd_buffer_create (&dum->hcd)) != 0) {
clean0:
init_completion (&dum->released);
platform_device_unregister (&dum->pdev);
wait_for_completion (&dum->released);
driver_unregister (&dummy_driver);
return retval;
}
INIT_LIST_HEAD (&hcd->dev_list);
usb_register_bus (bus);
bus->root_hub = root = usb_alloc_dev (0, bus, 0);
if (!root) {
retval = -ENOMEM;
clean1:
hcd_buffer_destroy (&dum->hcd);
usb_deregister_bus (bus);
goto clean0;
}
/* root hub enters addressed state... */
dum->hcd.state = USB_STATE_RUNNING;
root->speed = USB_SPEED_HIGH;
/* ...then configured, so khubd sees us. */
if ((retval = hcd_register_root (&dum->hcd)) != 0) {
bus->root_hub = 0;
usb_put_dev (root);
clean2:
dum->hcd.state = USB_STATE_QUIESCING;
goto clean1;
}
dum->started = 1;
if ((retval = dummy_register_udc (dum)) != 0) {
dum->started = 0;
usb_disconnect (&bus->root_hub);
goto clean2;
}
return 0;
}
static void dummy_stop (struct usb_hcd *hcd)
{
struct dummy *dum;
struct usb_bus *bus;
dum = container_of (hcd, struct dummy, hcd);
if (!dum->started)
return;
dum->started = 0;
usb_gadget_unregister_driver (dum->driver);
dummy_unregister_udc (dum);
bus = hcd_to_bus (&dum->hcd);
hcd->state = USB_STATE_QUIESCING;
dev_dbg (hardware, "remove root hub\n");
usb_disconnect (&bus->root_hub);
hcd_buffer_destroy (&dum->hcd);
usb_deregister_bus (bus);
dev_info (hardware, "stopped\n");
device_remove_file (hcd->self.controller, &dev_attr_urbs);
init_completion (&dum->released);
platform_device_unregister (&dum->pdev);
wait_for_completion (&dum->released);
driver_unregister (&dummy_driver);
}
/*-------------------------------------------------------------------------*/
static int dummy_h_get_frame (struct usb_hcd *hcd)
{
return dummy_g_get_frame (0);
}
static const struct hc_driver dummy_hcd = {
.description = (char *) driver_name,
.flags = HCD_USB2,
.start = dummy_start,
.stop = dummy_stop,
.hcd_alloc = dummy_alloc,
.hcd_free = dummy_free,
.urb_enqueue = dummy_urb_enqueue,
.urb_dequeue = dummy_urb_dequeue,
.get_frame_number = dummy_h_get_frame,
.hub_status_data = dummy_hub_status,
.hub_control = dummy_hub_control,
};
/*-------------------------------------------------------------------------*/
static int __init init (void)
{
struct usb_hcd *hcd;
int value;
if (usb_disabled ())
return -ENODEV;
if ((hcd = dummy_alloc ()) == 0)
return -ENOMEM;
the_controller = container_of (hcd, struct dummy, hcd);
value = dummy_start (hcd);
if (value != 0) {
dummy_free (hcd);
the_controller = 0;
}
return value;
}
module_init (init);
static void __exit cleanup (void)
{
dummy_stop (&the_controller->hcd);
dummy_free (&the_controller->hcd);
the_controller = 0;
}
module_exit (cleanup);
...@@ -206,6 +206,27 @@ static inline void hw_optimize(struct usb_gadget *gadget) ...@@ -206,6 +206,27 @@ static inline void hw_optimize(struct usb_gadget *gadget)
#endif #endif
/*
* Dummy_hcd, software-based loopback controller.
*
* This imitates the abilities of the NetChip 2280, so we will use
* the same configuration.
*/
#ifdef CONFIG_USB_GADGET_DUMMY_HCD
#define CHIP "dummy"
#define EP0_MAXPACKET 64
static const char EP_OUT_NAME[] = "ep-a";
#define EP_OUT_NUM 2
static const char EP_IN_NAME[] = "ep-b";
#define EP_IN_NUM 2
#define HIGHSPEED
#define SELFPOWER USB_CONFIG_ATT_SELFPOWER
/* no hw optimizations to apply */
#define hw_optimize(g) do {} while (0)
#endif
/* /*
* PXA-2xx UDC: widely used in second gen Linux-capable PDAs. * PXA-2xx UDC: widely used in second gen Linux-capable PDAs.
* *
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment