Merge branch 'Felix-DSA-driver-cleanup-build-Seville-separately'

Vladimir Oltean says:

====================
Felix DSA driver cleanup: build Seville separately

When introducing the Seville switch support to the Felix driver, some
technical debt was created. Since both VSC9959 and VSC9953 are embedded
switches (one on an arm64 SoC and the other on a powerpc SoC), there is
no use case for having the code for both be present in the same module.

This was necessary at the time due to the common SERDES PCS code that
they were using, but that has been since refactored into
drivers/net/pcs/pcs-lynx.c.

This makes the Seville driver stop uselessly depending upon PCI and
FSL_ENETC_MDIO, which were only dependencies of Felix in fact.

Some whitespace/tab conversions are also present in this series as part
of the cleanup process.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/ocelot/Kconfig

@@ -10,11 +10,17 @@ config NET_DSA_MSCC_FELIX
 	select FSL_ENETC_MDIO
 	select PCS_LYNX
 	help
-	  This driver supports network switches from the Vitesse /
-	  Microsemi / Microchip Ocelot family of switching cores that are
-	  connected to their host CPU via Ethernet.
-	  The following switches are supported:
-	  - VSC9959 (Felix): embedded as a PCIe function of the NXP LS1028A
-	    ENETC integrated endpoint.
-	  - VSC9953 (Seville): embedded as a platform device on the
-	    NXP T1040 SoC.
+	  This driver supports the VSC9959 (Felix) switch, which is embedded as
+	  a PCIe function of the NXP LS1028A ENETC RCiEP.
+
+config NET_DSA_MSCC_SEVILLE
+	tristate "Ocelot / Seville Ethernet switch support"
+	depends on NET_DSA
+	depends on NET_VENDOR_MICROSEMI
+	depends on HAS_IOMEM
+	select MSCC_OCELOT_SWITCH_LIB
+	select NET_DSA_TAG_OCELOT
+	select PCS_LYNX
+	help
+	  This driver supports the VSC9953 (Seville) switch, which is embedded
+	  as a platform device on the NXP T1040 SoC.

drivers/net/dsa/ocelot/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_NET_DSA_MSCC_FELIX) += mscc_felix.o
+obj-$(CONFIG_NET_DSA_MSCC_SEVILLE) += mscc_seville.o
 
 mscc_felix-objs := \
 	felix.o \
-	felix_vsc9959.o \
+	felix_vsc9959.o
+
+mscc_seville-objs := \
+	felix.o \
 	seville_vsc9953.o

drivers/net/dsa/ocelot/felix.c

@@ -538,23 +538,6 @@ static int felix_init_structs(struct felix *felix, int num_phys_ports)
 	return 0;
 }
 
-static struct ptp_clock_info ocelot_ptp_clock_info = {
-	.owner		= THIS_MODULE,
-	.name		= "felix ptp",
-	.max_adj	= 0x7fffffff,
-	.n_alarm	= 0,
-	.n_ext_ts	= 0,
-	.n_per_out	= OCELOT_PTP_PINS_NUM,
-	.n_pins		= OCELOT_PTP_PINS_NUM,
-	.pps		= 0,
-	.gettime64	= ocelot_ptp_gettime64,
-	.settime64	= ocelot_ptp_settime64,
-	.adjtime	= ocelot_ptp_adjtime,
-	.adjfine	= ocelot_ptp_adjfine,
-	.verify		= ocelot_ptp_verify,
-	.enable		= ocelot_ptp_enable,
-};
-
 /* Hardware initialization done here so that we can allocate structures with
  * devm without fear of dsa_register_switch returning -EPROBE_DEFER and causing
  * us to allocate structures twice (leak memory) and map PCI memory twice
@@ -573,7 +556,7 @@ static int felix_setup(struct dsa_switch *ds)
 
 	ocelot_init(ocelot);
 	if (ocelot->ptp) {
-		err = ocelot_init_timestamp(ocelot, &ocelot_ptp_clock_info);
+		err = ocelot_init_timestamp(ocelot, felix->info->ptp_caps);
 		if (err) {
 			dev_err(ocelot->dev,
 				"Timestamp initialization failed\n");
@@ -799,29 +782,3 @@ const struct dsa_switch_ops felix_switch_ops = {
 	.cls_flower_stats	= felix_cls_flower_stats,
 	.port_setup_tc		= felix_port_setup_tc,
 };
-
-static int __init felix_init(void)
-{
-	int err;
-
-	err = pci_register_driver(&felix_vsc9959_pci_driver);
-	if (err)
-		return err;
-
-	err = platform_driver_register(&seville_vsc9953_driver);
-	if (err)
-		return err;
-
-	return 0;
-}
-module_init(felix_init);
-
-static void __exit felix_exit(void)
-{
-	pci_unregister_driver(&felix_vsc9959_pci_driver);
-	platform_driver_unregister(&seville_vsc9953_driver);
-}
-module_exit(felix_exit);
-
-MODULE_DESCRIPTION("Felix Switch driver");
-MODULE_LICENSE("GPL v2");

drivers/net/dsa/ocelot/felix.h

@@ -26,6 +26,7 @@ struct felix_info {
 	const struct vcap_props		*vcap;
 	int				switch_pci_bar;
 	int				imdio_pci_bar;
+	const struct ptp_clock_info	*ptp_caps;
 	int	(*mdio_bus_alloc)(struct ocelot *ocelot);
 	void	(*mdio_bus_free)(struct ocelot *ocelot);
 	void	(*phylink_validate)(struct ocelot *ocelot, int port,
@@ -41,8 +42,6 @@ struct felix_info {
 };
 
 extern const struct dsa_switch_ops felix_switch_ops;
-extern struct pci_driver felix_vsc9959_pci_driver;
-extern struct platform_driver seville_vsc9953_driver;
 
 /* DSA glue / front-end for struct ocelot */
 struct felix {
@@ -55,6 +54,4 @@ struct felix {
 	resource_size_t			imdio_base;
 };
 
-void vsc9959_mdio_bus_free(struct ocelot *ocelot);
-
 #endif

drivers/net/dsa/ocelot/felix_vsc9959.c

@@ -719,6 +719,23 @@ static const struct vcap_props vsc9959_vcap_props[] = {
 	},
 };
 
+static const struct ptp_clock_info vsc9959_ptp_caps = {
+	.owner		= THIS_MODULE,
+	.name		= "felix ptp",
+	.max_adj	= 0x7fffffff,
+	.n_alarm	= 0,
+	.n_ext_ts	= 0,
+	.n_per_out	= OCELOT_PTP_PINS_NUM,
+	.n_pins		= OCELOT_PTP_PINS_NUM,
+	.pps		= 0,
+	.gettime64	= ocelot_ptp_gettime64,
+	.settime64	= ocelot_ptp_settime64,
+	.adjtime	= ocelot_ptp_adjtime,
+	.adjfine	= ocelot_ptp_adjfine,
+	.verify		= ocelot_ptp_verify,
+	.enable		= ocelot_ptp_enable,
+};
+
 #define VSC9959_INIT_TIMEOUT			50000
 #define VSC9959_GCB_RST_SLEEP			100
 #define VSC9959_SYS_RAMINIT_SLEEP		80
@@ -727,7 +744,7 @@ static int vsc9959_gcb_soft_rst_status(struct ocelot *ocelot)
 {
 	int val;
 
-	regmap_field_read(ocelot->regfields[GCB_SOFT_RST_SWC_RST], &val);
+	ocelot_field_read(ocelot, GCB_SOFT_RST_SWC_RST, &val);
 
 	return val;
 }
@@ -737,12 +754,15 @@ static int vsc9959_sys_ram_init_status(struct ocelot *ocelot)
 	return ocelot_read(ocelot, SYS_RAM_INIT);
 }
 
+/* CORE_ENA is in SYS:SYSTEM:RESET_CFG
+ * RAM_INIT is in SYS:RAM_CTRL:RAM_INIT
+ */
 static int vsc9959_reset(struct ocelot *ocelot)
 {
 	int val, err;
 
 	/* soft-reset the switch core */
-	regmap_field_write(ocelot->regfields[GCB_SOFT_RST_SWC_RST], 1);
+	ocelot_field_write(ocelot, GCB_SOFT_RST_SWC_RST, 1);
 
 	err = readx_poll_timeout(vsc9959_gcb_soft_rst_status, ocelot, val, !val,
 				 VSC9959_GCB_RST_SLEEP, VSC9959_INIT_TIMEOUT);
@@ -762,7 +782,7 @@ static int vsc9959_reset(struct ocelot *ocelot)
 	}
 
 	/* enable switch core */
-	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
+	ocelot_field_write(ocelot, SYS_RESET_CFG_CORE_ENA, 1);
 
 	return 0;
 }
@@ -933,7 +953,7 @@ static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
 	return 0;
 }
 
-void vsc9959_mdio_bus_free(struct ocelot *ocelot)
+static void vsc9959_mdio_bus_free(struct ocelot *ocelot)
 {
 	struct felix *felix = ocelot_to_felix(ocelot);
 	int port;
@@ -1166,6 +1186,7 @@ static const struct felix_info felix_info_vsc9959 = {
 	.num_tx_queues		= FELIX_NUM_TC,
 	.switch_pci_bar		= 4,
 	.imdio_pci_bar		= 0,
+	.ptp_caps		= &vsc9959_ptp_caps,
 	.mdio_bus_alloc		= vsc9959_mdio_bus_alloc,
 	.mdio_bus_free		= vsc9959_mdio_bus_free,
 	.phylink_validate	= vsc9959_phylink_validate,
@@ -1307,9 +1328,13 @@ static struct pci_device_id felix_ids[] = {
 };
 MODULE_DEVICE_TABLE(pci, felix_ids);
 
-struct pci_driver felix_vsc9959_pci_driver = {
+static struct pci_driver felix_vsc9959_pci_driver = {
 	.name		= "mscc_felix",
 	.id_table	= felix_ids,
 	.probe		= felix_pci_probe,
 	.remove		= felix_pci_remove,
 };
+module_pci_driver(felix_vsc9959_pci_driver);
+
+MODULE_DESCRIPTION("Felix Switch driver");
+MODULE_LICENSE("GPL v2");

drivers/net/dsa/ocelot/seville_vsc9953.c

@@ -16,23 +16,12 @@
 #define VSC9953_VCAP_IS2_ENTRY_WIDTH		376
 #define VSC9953_VCAP_PORT_CNT			10
 
-#define MSCC_MIIM_REG_STATUS			0x0
-#define		MSCC_MIIM_STATUS_STAT_BUSY	BIT(3)
-#define MSCC_MIIM_REG_CMD			0x8
 #define MSCC_MIIM_CMD_OPR_WRITE			BIT(1)
 #define MSCC_MIIM_CMD_OPR_READ			BIT(2)
 #define MSCC_MIIM_CMD_WRDATA_SHIFT		4
 #define MSCC_MIIM_CMD_REGAD_SHIFT		20
 #define MSCC_MIIM_CMD_PHYAD_SHIFT		25
 #define MSCC_MIIM_CMD_VLD			BIT(31)
-#define MSCC_MIIM_REG_DATA			0xC
-#define		MSCC_MIIM_DATA_ERROR		(BIT(16) | BIT(17))
-
-#define MSCC_PHY_REG_PHY_CFG		0x0
-#define		PHY_CFG_PHY_ENA		(BIT(0) | BIT(1) | BIT(2) | BIT(3))
-#define		PHY_CFG_PHY_COMMON_RESET BIT(4)
-#define		PHY_CFG_PHY_RESET	(BIT(5) | BIT(6) | BIT(7) | BIT(8))
-#define MSCC_PHY_REG_PHY_STATUS		0x4
 
 static const u32 vsc9953_ana_regmap[] = {
 	REG(ANA_ADVLEARN,			0x00b500),
@@ -820,6 +809,10 @@ static int vsc9953_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
 	return err;
 }
 
+/* CORE_ENA is in SYS:SYSTEM:RESET_CFG
+ * MEM_INIT is in SYS:SYSTEM:RESET_CFG
+ * MEM_ENA is in SYS:SYSTEM:RESET_CFG
+ */
 static int vsc9953_reset(struct ocelot *ocelot)
 {
 	int val, err;
@@ -835,8 +828,8 @@ static int vsc9953_reset(struct ocelot *ocelot)
 	}
 
 	/* initialize switch mem ~40us */
-	ocelot_field_write(ocelot, SYS_RESET_CFG_MEM_INIT, 1);
 	ocelot_field_write(ocelot, SYS_RESET_CFG_MEM_ENA, 1);
+	ocelot_field_write(ocelot, SYS_RESET_CFG_MEM_INIT, 1);
 
 	err = readx_poll_timeout(vsc9953_sys_ram_init_status, ocelot, val, !val,
 				 VSC9953_SYS_RAMINIT_SLEEP,
@@ -847,7 +840,6 @@ static int vsc9953_reset(struct ocelot *ocelot)
 	}
 
 	/* enable switch core */
-	ocelot_field_write(ocelot, SYS_RESET_CFG_MEM_ENA, 1);
 	ocelot_field_write(ocelot, SYS_RESET_CFG_CORE_ENA, 1);
 
 	return 0;
@@ -989,6 +981,23 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
 	return 0;
 }
 
+static void vsc9953_mdio_bus_free(struct ocelot *ocelot)
+{
+	struct felix *felix = ocelot_to_felix(ocelot);
+	int port;
+
+	for (port = 0; port < ocelot->num_phys_ports; port++) {
+		struct lynx_pcs *pcs = felix->pcs[port];
+
+		if (!pcs)
+			continue;
+
+		mdio_device_free(pcs->mdio);
+		lynx_pcs_destroy(pcs);
+	}
+	mdiobus_unregister(felix->imdio);
+}
+
 static void vsc9953_xmit_template_populate(struct ocelot *ocelot, int port)
 {
 	struct ocelot_port *ocelot_port = ocelot->ports[port];
@@ -1022,7 +1031,7 @@ static const struct felix_info seville_info_vsc9953 = {
 	.num_mact_rows		= 2048,
 	.num_ports		= 10,
 	.mdio_bus_alloc		= vsc9953_mdio_bus_alloc,
-	.mdio_bus_free		= vsc9959_mdio_bus_free,
+	.mdio_bus_free		= vsc9953_mdio_bus_free,
 	.phylink_validate	= vsc9953_phylink_validate,
 	.prevalidate_phy_mode	= vsc9953_prevalidate_phy_mode,
 	.xmit_template_populate	= vsc9953_xmit_template_populate,
@@ -1101,7 +1110,7 @@ static const struct of_device_id seville_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, seville_of_match);
 
-struct platform_driver seville_vsc9953_driver = {
+static struct platform_driver seville_vsc9953_driver = {
 	.probe		= seville_probe,
 	.remove		= seville_remove,
 	.driver = {
@@ -1109,3 +1118,7 @@ struct platform_driver seville_vsc9953_driver = {
 		.of_match_table	= of_match_ptr(seville_of_match),
 	},
 };
+module_platform_driver(seville_vsc9953_driver);
+
+MODULE_DESCRIPTION("Seville Switch driver");
+MODULE_LICENSE("GPL v2");

drivers/net/ethernet/mscc/ocelot_ptp.c

@@ -300,7 +300,8 @@ int ocelot_ptp_enable(struct ptp_clock_info *ptp,
 }
 EXPORT_SYMBOL(ocelot_ptp_enable);
 
-int ocelot_init_timestamp(struct ocelot *ocelot, struct ptp_clock_info *info)
+int ocelot_init_timestamp(struct ocelot *ocelot,
+			  const struct ptp_clock_info *info)
 {
 	struct ptp_clock *ptp_clock;
 	int i;

include/soc/mscc/ocelot_ptp.h

@@ -53,6 +53,7 @@ int ocelot_ptp_verify(struct ptp_clock_info *ptp, unsigned int pin,
 		      enum ptp_pin_function func, unsigned int chan);
 int ocelot_ptp_enable(struct ptp_clock_info *ptp,
 		      struct ptp_clock_request *rq, int on);
-int ocelot_init_timestamp(struct ocelot *ocelot, struct ptp_clock_info *info);
+int ocelot_init_timestamp(struct ocelot *ocelot,
+			  const struct ptp_clock_info *info);
 int ocelot_deinit_timestamp(struct ocelot *ocelot);
 #endif