Commit 0db0f26c authored by Andrey Smirnov's avatar Andrey Smirnov Committed by Linus Walleij

pinctrl-sx150x: Convert driver to use regmap API

To allow for future code simplification
Tested-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Acked-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: default avatarAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent b30d31e4
......@@ -171,6 +171,7 @@ config PINCTRL_SX150X
select PINCONF
select GENERIC_PINCONF
select GPIOLIB_IRQCHIP
select REGMAP
help
Say yes here to provide support for Semtech SX150x-series I2C
GPIO expanders as pinctrl module.
......
......@@ -18,6 +18,7 @@
* GNU General Public License for more details.
*/
#include <linux/regmap.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
......@@ -45,6 +46,7 @@ enum {
};
enum {
SX150X_789_REG_MISC_AUTOCLEAR_OFF = 1 << 0,
SX150X_MAX_REGISTER = 0xad,
};
struct sx150x_123_pri {
......@@ -102,6 +104,7 @@ struct sx150x_pinctrl {
struct pinctrl_desc pinctrl_desc;
struct gpio_chip gpio;
struct irq_chip irq_chip;
struct regmap *regmap;
struct {
int update;
u32 sense;
......@@ -256,30 +259,6 @@ static const struct sx150x_device_data sx1503q_device_data = {
.npins = 16, /* oscio not available */
};
static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val)
{
s32 err = i2c_smbus_write_byte_data(client, reg, val);
if (err < 0)
dev_warn(&client->dev,
"i2c write fail: can't write %02x to %02x: %d\n",
val, reg, err);
return err;
}
static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
{
s32 err = i2c_smbus_read_byte_data(client, reg);
if (err >= 0)
*val = err;
else
dev_warn(&client->dev,
"i2c read fail: can't read from %02x: %d\n",
reg, err);
return err;
}
/*
* These utility functions solve the common problem of locating and setting
* configuration bits. Configuration bits are grouped into registers
......@@ -312,30 +291,32 @@ static int sx150x_write_cfg(struct i2c_client *client,
u8 offset, u8 width, u8 reg, u8 val)
{
u8 mask;
u8 data;
unsigned int data;
u8 shift;
int err;
struct sx150x_pinctrl *pctl = i2c_get_clientdata(client);
sx150x_find_cfg(offset, width, &reg, &mask, &shift);
err = sx150x_i2c_read(client, reg, &data);
err = regmap_read(pctl->regmap, reg, &data);
if (err < 0)
return err;
data &= ~mask;
data |= (val << shift) & mask;
return sx150x_i2c_write(client, reg, data);
return regmap_write(pctl->regmap, reg, data);
}
static int sx150x_read_cfg(struct i2c_client *client,
u8 offset, u8 width, u8 reg)
{
u8 mask;
u8 data;
unsigned int data;
u8 shift;
int err;
struct sx150x_pinctrl *pctl = i2c_get_clientdata(client);
sx150x_find_cfg(offset, width, &reg, &mask, &shift);
err = sx150x_i2c_read(client, reg, &data);
err = regmap_read(pctl->regmap, reg, &data);
if (err < 0)
return err;
......@@ -463,9 +444,8 @@ static void sx150x_gpio_set(struct gpio_chip *chip, unsigned int offset,
struct sx150x_pinctrl *pctl = gpiochip_get_data(chip);
if (sx150x_pin_is_oscio(pctl, offset)) {
mutex_lock(&pctl->lock);
sx150x_i2c_write(pctl->client,
regmap_write(pctl->regmap,
pctl->data->pri.x789.reg_clock,
(value ? 0x1f : 0x10));
mutex_unlock(&pctl->lock);
......@@ -567,17 +547,17 @@ static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id)
unsigned int sub_irq;
unsigned int n;
s32 err;
u8 val;
unsigned int val;
int i;
for (i = (pctl->data->ngpios / 8) - 1; i >= 0; --i) {
err = sx150x_i2c_read(pctl->client,
err = regmap_read(pctl->regmap,
pctl->data->reg_irq_src - i,
&val);
if (err < 0)
continue;
err = sx150x_i2c_write(pctl->client,
err = regmap_write(pctl->regmap,
pctl->data->reg_irq_src - i,
val);
if (err < 0)
......@@ -650,13 +630,13 @@ static int sx150x_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
u32 arg;
if (sx150x_pin_is_oscio(pctl, pin)) {
u8 data;
unsigned int data;
switch (param) {
case PIN_CONFIG_DRIVE_PUSH_PULL:
case PIN_CONFIG_OUTPUT:
mutex_lock(&pctl->lock);
ret = sx150x_i2c_read(pctl->client,
ret = regmap_read(pctl->regmap,
pctl->data->pri.x789.reg_clock,
&data);
mutex_unlock(&pctl->lock);
......@@ -904,7 +884,7 @@ static int sx150x_init_io(struct sx150x_pinctrl *pctl, u8 base, u16 cfg)
unsigned int n;
for (n = 0; err >= 0 && n < (pctl->data->ngpios / 8); ++n)
err = sx150x_i2c_write(pctl->client, base - n, cfg >> (n * 8));
err = regmap_write(pctl->regmap, base - n, cfg >> (n * 8));
return err;
}
......@@ -953,7 +933,7 @@ static int sx150x_init_misc(struct sx150x_pinctrl *pctl)
return -EINVAL;
}
return sx150x_i2c_write(pctl->client, reg, value);
return i2c_smbus_write_byte_data(pctl->client, reg, value);
}
static int sx150x_init_hw(struct sx150x_pinctrl *pctl)
......@@ -997,6 +977,26 @@ static int sx150x_init_hw(struct sx150x_pinctrl *pctl)
return 0;
}
static bool sx150x_reg_volatile(struct device *dev, unsigned int reg)
{
struct sx150x_pinctrl *pctl = i2c_get_clientdata(to_i2c_client(dev));
return reg == pctl->data->reg_irq_src ||
reg == pctl->data->reg_irq_src - 1 ||
reg == pctl->data->reg_data ||
reg == pctl->data->reg_data - 1;
}
const struct regmap_config sx150x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.cache_type = REGCACHE_RBTREE,
.max_register = SX150X_MAX_REGISTER,
.volatile_reg = sx150x_reg_volatile,
};
static int sx150x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
......@@ -1013,6 +1013,8 @@ static int sx150x_probe(struct i2c_client *client,
if (!pctl)
return -ENOMEM;
i2c_set_clientdata(client, pctl);
pctl->dev = dev;
pctl->client = client;
......@@ -1024,6 +1026,14 @@ static int sx150x_probe(struct i2c_client *client,
if (!pctl->data)
return -EINVAL;
pctl->regmap = devm_regmap_init_i2c(client, &sx150x_regmap_config);
if (IS_ERR(pctl->regmap)) {
ret = PTR_ERR(pctl->regmap);
dev_err(dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
mutex_init(&pctl->lock);
ret = sx150x_init_hw(pctl);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment