Commit 0dc016db authored by Wang Nan's avatar Wang Nan Committed by Jon Medhurst

ARM: kprobes: enable OPTPROBES for ARM 32

This patch introduce kprobeopt for ARM 32.

Limitations:
 - Currently only kernel compiled with ARM ISA is supported.

 - Offset between probe point and optinsn slot must not larger than
   32MiB. Masami Hiramatsu suggests replacing 2 words, it will make
   things complex. Futher patch can make such optimization.

Kprobe opt on ARM is relatively simpler than kprobe opt on x86 because
ARM instruction is always 4 bytes aligned and 4 bytes long. This patch
replace probed instruction by a 'b', branch to trampoline code and then
calls optimized_callback(). optimized_callback() calls opt_pre_handler()
to execute kprobe handler. It also emulate/simulate replaced instruction.

When unregistering kprobe, the deferred manner of unoptimizer may leave
branch instruction before optimizer is called. Different from x86_64,
which only copy the probed insn after optprobe_template_end and
reexecute them, this patch call singlestep to emulate/simulate the insn
directly. Futher patch can optimize this behavior.
Signed-off-by: default avatarWang Nan <wangnan0@huawei.com>
Acked-by: default avatarMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: default avatarJon Medhurst (Tixy) <tixy@linaro.org>
Signed-off-by: default avatarJon Medhurst <tixy@linaro.org>
parent cbf6ab52
......@@ -60,6 +60,7 @@ config ARM
select HAVE_MEMBLOCK
select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_OPTPROBES if !THUMB2_KERNEL
select HAVE_PERF_EVENTS
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
......
......@@ -50,5 +50,34 @@ int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
int kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data);
/* optinsn template addresses */
extern __visible kprobe_opcode_t optprobe_template_entry;
extern __visible kprobe_opcode_t optprobe_template_val;
extern __visible kprobe_opcode_t optprobe_template_call;
extern __visible kprobe_opcode_t optprobe_template_end;
extern __visible kprobe_opcode_t optprobe_template_sub_sp;
extern __visible kprobe_opcode_t optprobe_template_add_sp;
#define MAX_OPTIMIZED_LENGTH 4
#define MAX_OPTINSN_SIZE \
((unsigned long)&optprobe_template_end - \
(unsigned long)&optprobe_template_entry)
#define RELATIVEJUMP_SIZE 4
struct arch_optimized_insn {
/*
* copy of the original instructions.
* Different from x86, ARM kprobe_opcode_t is u32.
*/
#define MAX_COPIED_INSN DIV_ROUND_UP(RELATIVEJUMP_SIZE, sizeof(kprobe_opcode_t))
kprobe_opcode_t copied_insn[MAX_COPIED_INSN];
/* detour code buffer */
kprobe_opcode_t *insn;
/*
* We always copy one instruction on ARM,
* so size will always be 4, and unlike x86, there is no
* need for a size field.
*/
};
#endif /* _ARM_KPROBES_H */
......@@ -52,7 +52,7 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o insn.o
obj-$(CONFIG_JUMP_LABEL) += jump_label.o insn.o patch.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
# Main staffs in KPROBES are in arch/arm/probes/ .
obj-$(CONFIG_KPROBES) += patch.o
obj-$(CONFIG_KPROBES) += patch.o insn.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
obj-$(CONFIG_KGDB) += kgdb.o patch.o
......
......@@ -20,8 +20,7 @@
#include <asm/cacheflush.h>
#include <asm/opcodes.h>
#include <asm/ftrace.h>
#include "insn.h"
#include <asm/insn.h>
#ifdef CONFIG_THUMB2_KERNEL
#define NOP 0xf85deb04 /* pop.w {lr} */
......
#include <linux/kernel.h>
#include <linux/jump_label.h>
#include <asm/patch.h>
#include "insn.h"
#include <asm/insn.h>
#ifdef HAVE_JUMP_LABEL
......
......@@ -7,5 +7,6 @@ obj-$(CONFIG_KPROBES) += actions-thumb.o checkers-thumb.o
test-kprobes-objs += test-thumb.o
else
obj-$(CONFIG_KPROBES) += actions-arm.o checkers-arm.o
obj-$(CONFIG_OPTPROBES) += opt-arm.o
test-kprobes-objs += test-arm.o
endif
......@@ -163,19 +163,31 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
* memory. It is also needed to atomically set the two half-words of a 32-bit
* Thumb breakpoint.
*/
int __kprobes __arch_disarm_kprobe(void *p)
{
struct kprobe *kp = p;
void *addr = (void *)((uintptr_t)kp->addr & ~1);
__patch_text(addr, kp->opcode);
struct patch {
void *addr;
unsigned int insn;
};
static int __kprobes_remove_breakpoint(void *data)
{
struct patch *p = data;
__patch_text(p->addr, p->insn);
return 0;
}
void __kprobes kprobes_remove_breakpoint(void *addr, unsigned int insn)
{
struct patch p = {
.addr = addr,
.insn = insn,
};
stop_machine(__kprobes_remove_breakpoint, &p, cpu_online_mask);
}
void __kprobes arch_disarm_kprobe(struct kprobe *p)
{
stop_machine(__arch_disarm_kprobe, p, cpu_online_mask);
kprobes_remove_breakpoint((void *)((uintptr_t)p->addr & ~1),
p->opcode);
}
void __kprobes arch_remove_kprobe(struct kprobe *p)
......
......@@ -30,6 +30,8 @@
#define KPROBE_THUMB16_BREAKPOINT_INSTRUCTION 0xde18
#define KPROBE_THUMB32_BREAKPOINT_INSTRUCTION 0xf7f0a018
extern void kprobes_remove_breakpoint(void *addr, unsigned int insn);
enum probes_insn __kprobes
kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_probes_insn *asi,
const struct decode_header *h);
......
/*
* Kernel Probes Jump Optimization (Optprobes)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright (C) IBM Corporation, 2002, 2004
* Copyright (C) Hitachi Ltd., 2012
* Copyright (C) Huawei Inc., 2014
*/
#include <linux/kprobes.h>
#include <linux/jump_label.h>
#include <asm/kprobes.h>
#include <asm/cacheflush.h>
/* for arm_gen_branch */
#include <asm/insn.h>
/* for patch_text */
#include <asm/patch.h>
#include "core.h"
/*
* NOTE: the first sub and add instruction will be modified according
* to the stack cost of the instruction.
*/
asm (
".global optprobe_template_entry\n"
"optprobe_template_entry:\n"
".global optprobe_template_sub_sp\n"
"optprobe_template_sub_sp:"
" sub sp, sp, #0xff\n"
" stmia sp, {r0 - r14} \n"
".global optprobe_template_add_sp\n"
"optprobe_template_add_sp:"
" add r3, sp, #0xff\n"
" str r3, [sp, #52]\n"
" mrs r4, cpsr\n"
" str r4, [sp, #64]\n"
" mov r1, sp\n"
" ldr r0, 1f\n"
" ldr r2, 2f\n"
/*
* AEABI requires an 8-bytes alignment stack. If
* SP % 8 != 0 (SP % 4 == 0 should be ensured),
* alloc more bytes here.
*/
" and r4, sp, #4\n"
" sub sp, sp, r4\n"
#if __LINUX_ARM_ARCH__ >= 5
" blx r2\n"
#else
" mov lr, pc\n"
" mov pc, r2\n"
#endif
" add sp, sp, r4\n"
" ldr r1, [sp, #64]\n"
" tst r1, #"__stringify(PSR_T_BIT)"\n"
" ldrne r2, [sp, #60]\n"
" orrne r2, #1\n"
" strne r2, [sp, #60] @ set bit0 of PC for thumb\n"
" msr cpsr_cxsf, r1\n"
" ldmia sp, {r0 - r15}\n"
".global optprobe_template_val\n"
"optprobe_template_val:\n"
"1: .long 0\n"
".global optprobe_template_call\n"
"optprobe_template_call:\n"
"2: .long 0\n"
".global optprobe_template_end\n"
"optprobe_template_end:\n");
#define TMPL_VAL_IDX \
((unsigned long *)&optprobe_template_val - (unsigned long *)&optprobe_template_entry)
#define TMPL_CALL_IDX \
((unsigned long *)&optprobe_template_call - (unsigned long *)&optprobe_template_entry)
#define TMPL_END_IDX \
((unsigned long *)&optprobe_template_end - (unsigned long *)&optprobe_template_entry)
#define TMPL_ADD_SP \
((unsigned long *)&optprobe_template_add_sp - (unsigned long *)&optprobe_template_entry)
#define TMPL_SUB_SP \
((unsigned long *)&optprobe_template_sub_sp - (unsigned long *)&optprobe_template_entry)
/*
* ARM can always optimize an instruction when using ARM ISA, except
* instructions like 'str r0, [sp, r1]' which store to stack and unable
* to determine stack space consumption statically.
*/
int arch_prepared_optinsn(struct arch_optimized_insn *optinsn)
{
return optinsn->insn != NULL;
}
/*
* In ARM ISA, kprobe opt always replace one instruction (4 bytes
* aligned and 4 bytes long). It is impossible to encounter another
* kprobe in the address range. So always return 0.
*/
int arch_check_optimized_kprobe(struct optimized_kprobe *op)
{
return 0;
}
/* Caller must ensure addr & 3 == 0 */
static int can_optimize(struct kprobe *kp)
{
if (kp->ainsn.stack_space < 0)
return 0;
/*
* 255 is the biggest imm can be used in 'sub r0, r0, #<imm>'.
* Number larger than 255 needs special encoding.
*/
if (kp->ainsn.stack_space > 255 - sizeof(struct pt_regs))
return 0;
return 1;
}
/* Free optimized instruction slot */
static void
__arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
{
if (op->optinsn.insn) {
free_optinsn_slot(op->optinsn.insn, dirty);
op->optinsn.insn = NULL;
}
}
extern void kprobe_handler(struct pt_regs *regs);
static void
optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
{
unsigned long flags;
struct kprobe *p = &op->kp;
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
/* Save skipped registers */
regs->ARM_pc = (unsigned long)op->kp.addr;
regs->ARM_ORIG_r0 = ~0UL;
local_irq_save(flags);
if (kprobe_running()) {
kprobes_inc_nmissed_count(&op->kp);
} else {
__this_cpu_write(current_kprobe, &op->kp);
kcb->kprobe_status = KPROBE_HIT_ACTIVE;
opt_pre_handler(&op->kp, regs);
__this_cpu_write(current_kprobe, NULL);
}
/* In each case, we must singlestep the replaced instruction. */
op->kp.ainsn.insn_singlestep(p->opcode, &p->ainsn, regs);
local_irq_restore(flags);
}
int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *orig)
{
kprobe_opcode_t *code;
unsigned long rel_chk;
unsigned long val;
unsigned long stack_protect = sizeof(struct pt_regs);
if (!can_optimize(orig))
return -EILSEQ;
code = get_optinsn_slot();
if (!code)
return -ENOMEM;
/*
* Verify if the address gap is in 32MiB range, because this uses
* a relative jump.
*
* kprobe opt use a 'b' instruction to branch to optinsn.insn.
* According to ARM manual, branch instruction is:
*
* 31 28 27 24 23 0
* +------+---+---+---+---+----------------+
* | cond | 1 | 0 | 1 | 0 | imm24 |
* +------+---+---+---+---+----------------+
*
* imm24 is a signed 24 bits integer. The real branch offset is computed
* by: imm32 = SignExtend(imm24:'00', 32);
*
* So the maximum forward branch should be:
* (0x007fffff << 2) = 0x01fffffc = 0x1fffffc
* The maximum backword branch should be:
* (0xff800000 << 2) = 0xfe000000 = -0x2000000
*
* We can simply check (rel & 0xfe000003):
* if rel is positive, (rel & 0xfe000000) shoule be 0
* if rel is negitive, (rel & 0xfe000000) should be 0xfe000000
* the last '3' is used for alignment checking.
*/
rel_chk = (unsigned long)((long)code -
(long)orig->addr + 8) & 0xfe000003;
if ((rel_chk != 0) && (rel_chk != 0xfe000000)) {
/*
* Different from x86, we free code buf directly instead of
* calling __arch_remove_optimized_kprobe() because
* we have not fill any field in op.
*/
free_optinsn_slot(code, 0);
return -ERANGE;
}
/* Copy arch-dep-instance from template. */
memcpy(code, &optprobe_template_entry,
TMPL_END_IDX * sizeof(kprobe_opcode_t));
/* Adjust buffer according to instruction. */
BUG_ON(orig->ainsn.stack_space < 0);
stack_protect += orig->ainsn.stack_space;
/* Should have been filtered by can_optimize(). */
BUG_ON(stack_protect > 255);
/* Create a 'sub sp, sp, #<stack_protect>' */
code[TMPL_SUB_SP] = __opcode_to_mem_arm(0xe24dd000 | stack_protect);
/* Create a 'add r3, sp, #<stack_protect>' */
code[TMPL_ADD_SP] = __opcode_to_mem_arm(0xe28d3000 | stack_protect);
/* Set probe information */
val = (unsigned long)op;
code[TMPL_VAL_IDX] = val;
/* Set probe function call */
val = (unsigned long)optimized_callback;
code[TMPL_CALL_IDX] = val;
flush_icache_range((unsigned long)code,
(unsigned long)(&code[TMPL_END_IDX]));
/* Set op->optinsn.insn means prepared. */
op->optinsn.insn = code;
return 0;
}
void __kprobes arch_optimize_kprobes(struct list_head *oplist)
{
struct optimized_kprobe *op, *tmp;
list_for_each_entry_safe(op, tmp, oplist, list) {
unsigned long insn;
WARN_ON(kprobe_disabled(&op->kp));
/*
* Backup instructions which will be replaced
* by jump address
*/
memcpy(op->optinsn.copied_insn, op->kp.addr,
RELATIVEJUMP_SIZE);
insn = arm_gen_branch((unsigned long)op->kp.addr,
(unsigned long)op->optinsn.insn);
BUG_ON(insn == 0);
/*
* Make it a conditional branch if replaced insn
* is consitional
*/
insn = (__mem_to_opcode_arm(
op->optinsn.copied_insn[0]) & 0xf0000000) |
(insn & 0x0fffffff);
/*
* Similar to __arch_disarm_kprobe, operations which
* removing breakpoints must be wrapped by stop_machine
* to avoid racing.
*/
kprobes_remove_breakpoint(op->kp.addr, insn);
list_del_init(&op->list);
}
}
void arch_unoptimize_kprobe(struct optimized_kprobe *op)
{
arch_arm_kprobe(&op->kp);
}
/*
* Recover original instructions and breakpoints from relative jumps.
* Caller must call with locking kprobe_mutex.
*/
void arch_unoptimize_kprobes(struct list_head *oplist,
struct list_head *done_list)
{
struct optimized_kprobe *op, *tmp;
list_for_each_entry_safe(op, tmp, oplist, list) {
arch_unoptimize_kprobe(op);
list_move(&op->list, done_list);
}
}
int arch_within_optimized_kprobe(struct optimized_kprobe *op,
unsigned long addr)
{
return ((unsigned long)op->kp.addr <= addr &&
(unsigned long)op->kp.addr + RELATIVEJUMP_SIZE > addr);
}
void arch_remove_optimized_kprobe(struct optimized_kprobe *op)
{
__arch_remove_optimized_kprobe(op, 1);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment