Merge branch 'omap-for-linus' of...

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h

MAINTAINERS

@@ -4510,11 +4510,21 @@ S:	Maintained
 F:	arch/arm/*omap*/*clock*
 
 OMAP POWER MANAGEMENT SUPPORT
-M:	Kevin Hilman <khilman@deeprootsystems.com>
+M:	Kevin Hilman <khilman@ti.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/*omap*/*pm*
 
+OMAP POWERDOMAIN/CLOCKDOMAIN SOC ADAPTATION LAYER SUPPORT
+M:	Rajendra Nayak <rnayak@ti.com>
+M:	Paul Walmsley <paul@pwsan.com>
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+F:	arch/arm/mach-omap2/powerdomain44xx.c
+F:	arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+F:	arch/arm/mach-omap2/clockdomain44xx.c
+
 OMAP AUDIO SUPPORT
 M:	Jarkko Nikula <jhnikula@gmail.com>
 L:	alsa-devel@alsa-project.org (subscribers-only)

arch/arm/configs/omap2plus_defconfig

@@ -58,6 +58,7 @@ CONFIG_ARM_ERRATA_411920=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
+CONFIG_NR_CPUS=2
 # CONFIG_LOCAL_TIMERS is not set
 CONFIG_AEABI=y
 CONFIG_LEDS=y

arch/arm/mach-omap1/Makefile

@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o
+obj-y += clock.o clock_data.o opp_data.o reset.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 

arch/arm/mach-omap1/board-ams-delta.c

@@ -165,7 +165,7 @@ static struct map_desc ams_delta_io_desc[] __initdata = {
 	}
 };
 
-static struct omap_lcd_config ams_delta_lcd_config __initdata = {
+static struct omap_lcd_config ams_delta_lcd_config = {
 	.ctrl_name	= "internal",
 };
 
@@ -175,7 +175,7 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-static struct omap_board_config_kernel ams_delta_config[] = {
+static struct omap_board_config_kernel ams_delta_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&ams_delta_lcd_config },
 };
 
@@ -208,14 +208,14 @@ static const struct matrix_keymap_data ams_delta_keymap_data = {
 	.keymap_size	= ARRAY_SIZE(ams_delta_keymap),
 };
 
-static struct omap_kp_platform_data ams_delta_kp_data = {
+static struct omap_kp_platform_data ams_delta_kp_data __initdata = {
 	.rows		= 8,
 	.cols		= 8,
 	.keymap_data	= &ams_delta_keymap_data,
 	.delay		= 9,
 };
 
-static struct platform_device ams_delta_kp_device = {
+static struct platform_device ams_delta_kp_device __initdata = {
 	.name		= "omap-keypad",
 	.id		= -1,
 	.dev		= {
@@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device = {
 	.resource	= ams_delta_kp_resources,
 };
 
-static struct platform_device ams_delta_lcd_device = {
+static struct platform_device ams_delta_lcd_device __initdata = {
 	.name	= "lcd_ams_delta",
 	.id	= -1,
 };
 
-static struct platform_device ams_delta_led_device = {
+static struct platform_device ams_delta_led_device __initdata = {
 	.name	= "ams-delta-led",
 	.id	= -1
 };
@@ -259,7 +259,7 @@ static int ams_delta_camera_power(struct device *dev, int power)
 #define ams_delta_camera_power	NULL
 #endif
 
-static struct soc_camera_link __initdata ams_delta_iclink = {
+static struct soc_camera_link ams_delta_iclink = {
 	.bus_id         = 0,	/* OMAP1 SoC camera bus */
 	.i2c_adapter_id = 1,
 	.board_info     = &ams_delta_camera_board_info[0],
@@ -267,7 +267,7 @@ static struct soc_camera_link __initdata ams_delta_iclink = {
 	.power		= ams_delta_camera_power,
 };
 
-static struct platform_device ams_delta_camera_device = {
+static struct platform_device ams_delta_camera_device __initdata = {
 	.name   = "soc-camera-pdrv",
 	.id     = 0,
 	.dev    = {

arch/arm/mach-omap1/board-fsample.c

@@ -287,11 +287,11 @@ static struct platform_device *devices[] __initdata = {
 	&lcd_device,
 };
 
-static struct omap_lcd_config fsample_lcd_config __initdata = {
+static struct omap_lcd_config fsample_lcd_config = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_board_config_kernel fsample_config[] = {
+static struct omap_board_config_kernel fsample_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&fsample_lcd_config },
 };
 

arch/arm/mach-omap1/board-h2.c

@@ -202,7 +202,7 @@ static int h2_nand_dev_ready(struct mtd_info *mtd)
 
 static const char *h2_part_probes[] = { "cmdlinepart", NULL };
 
-struct platform_nand_data h2_nand_platdata = {
+static struct platform_nand_data h2_nand_platdata = {
 	.chip	= {
 		.nr_chips		= 1,
 		.chip_offset		= 0,

arch/arm/mach-omap1/board-h3.c

@@ -204,7 +204,7 @@ static int nand_dev_ready(struct mtd_info *mtd)
 
 static const char *part_probes[] = { "cmdlinepart", NULL };
 
-struct platform_nand_data nand_platdata = {
+static struct platform_nand_data nand_platdata = {
 	.chip	= {
 		.nr_chips		= 1,
 		.chip_offset		= 0,

arch/arm/mach-omap1/board-htcherald.c

@@ -331,7 +331,7 @@ static struct resource htcpld_resources[] = {
 	},
 };
 
-struct htcpld_chip_platform_data htcpld_chips[] = {
+static struct htcpld_chip_platform_data htcpld_chips[] = {
 	[0] = {
 		.addr		= 0x03,
 		.reset		= 0x04,
@@ -366,7 +366,7 @@ struct htcpld_chip_platform_data htcpld_chips[] = {
 	},
 };
 
-struct htcpld_core_platform_data htcpld_pfdata = {
+static struct htcpld_core_platform_data htcpld_pfdata = {
 	.int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
 	.int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
 	.i2c_adapter_id	   = 1,

arch/arm/mach-omap1/board-innovator.c

@@ -365,7 +365,7 @@ static struct omap_mmc_platform_data mmc1_data = {
 
 static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
 
-void __init innovator_mmc_init(void)
+static void __init innovator_mmc_init(void)
 {
 	mmc_data[0] = &mmc1_data;
 	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);

arch/arm/mach-omap1/board-nokia770.c

@@ -115,7 +115,7 @@ static struct mipid_platform_data nokia770_mipid_platform_data = {
 	.shutdown = mipid_shutdown,
 };
 
-static void mipid_dev_init(void)
+static void __init mipid_dev_init(void)
 {
 	const struct omap_lcd_config *conf;
 
@@ -126,7 +126,7 @@ static void mipid_dev_init(void)
 	}
 }
 
-static void ads7846_dev_init(void)
+static void __init ads7846_dev_init(void)
 {
 	if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0)
 		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
@@ -170,7 +170,7 @@ static struct hwa742_platform_data nokia770_hwa742_platform_data = {
 	.te_connected		= 1,
 };
 
-static void hwa742_dev_init(void)
+static void __init hwa742_dev_init(void)
 {
 	clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
 	omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data);

arch/arm/mach-omap1/board-palmte.c

@@ -230,19 +230,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
 	},
 };
 
-static void palmte_headphones_detect(void *data, int state)
-{
-	if (state) {
-		/* Headphones connected, disable speaker */
-		gpio_set_value(PALMTE_SPEAKER_GPIO, 0);
-		printk(KERN_INFO "PM: speaker off\n");
-	} else {
-		/* Headphones unplugged, re-enable speaker */
-		gpio_set_value(PALMTE_SPEAKER_GPIO, 1);
-		printk(KERN_INFO "PM: speaker on\n");
-	}
-}
-
 static void __init palmte_misc_gpio_setup(void)
 {
 	/* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */

arch/arm/mach-omap1/board-voiceblue.c

@@ -26,10 +26,12 @@
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
+#include <mach/system.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <plat/board-voiceblue.h>
 #include <plat/common.h>
 #include <mach/gpio.h>
 #include <plat/flash.h>
@@ -163,52 +165,6 @@ static void __init voiceblue_init_irq(void)
 	omap_init_irq();
 }
 
-static void __init voiceblue_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	/* Watchdog */
-	gpio_request(0, "Watchdog");
-	/* smc91x reset */
-	gpio_request(7, "SMC91x reset");
-	gpio_direction_output(7, 1);
-	udelay(2);	/* wait at least 100ns */
-	gpio_set_value(7, 0);
-	mdelay(50);	/* 50ms until PHY ready */
-	/* smc91x interrupt pin */
-	gpio_request(8, "SMC91x irq");
-	/* 16C554 reset*/
-	gpio_request(6, "16C554 reset");
-	gpio_direction_output(6, 0);
-	/* 16C554 interrupt pins */
-	gpio_request(12, "16C554 irq");
-	gpio_request(13, "16C554 irq");
-	gpio_request(14, "16C554 irq");
-	gpio_request(15, "16C554 irq");
-	set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
-
-	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
-	omap_board_config = voiceblue_config;
-	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
-	omap_serial_init();
-	omap1_usb_init(&voiceblue_usb_config);
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	/* There is a good chance board is going up, so enable power LED
-	 * (it is connected through invertor) */
-	omap_writeb(0x00, OMAP_LPG1_LCR);
-	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
-}
-
 static void __init voiceblue_map_io(void)
 {
 	omap1_map_common_io();
@@ -275,8 +231,17 @@ void voiceblue_wdt_ping(void)
 	gpio_set_value(0, wdt_gpio_state);
 }
 
-void voiceblue_reset(void)
+static void voiceblue_reset(char mode, const char *cmd)
 {
+	/*
+	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+	 * "Global Software Reset Affects Traffic Controller Frequency".
+	 */
+	if (cpu_is_omap5912()) {
+		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
+		omap_writew(0x8, ARM_RSTCT1);
+	}
+
 	set_bit(MACHINE_REBOOT, &machine_state);
 	voiceblue_wdt_enable();
 	while (1) ;
@@ -286,6 +251,54 @@ EXPORT_SYMBOL(voiceblue_wdt_enable);
 EXPORT_SYMBOL(voiceblue_wdt_disable);
 EXPORT_SYMBOL(voiceblue_wdt_ping);
 
+static void __init voiceblue_init(void)
+{
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
+	/* Watchdog */
+	gpio_request(0, "Watchdog");
+	/* smc91x reset */
+	gpio_request(7, "SMC91x reset");
+	gpio_direction_output(7, 1);
+	udelay(2);	/* wait at least 100ns */
+	gpio_set_value(7, 0);
+	mdelay(50);	/* 50ms until PHY ready */
+	/* smc91x interrupt pin */
+	gpio_request(8, "SMC91x irq");
+	/* 16C554 reset*/
+	gpio_request(6, "16C554 reset");
+	gpio_direction_output(6, 0);
+	/* 16C554 interrupt pins */
+	gpio_request(12, "16C554 irq");
+	gpio_request(13, "16C554 irq");
+	gpio_request(14, "16C554 irq");
+	gpio_request(15, "16C554 irq");
+	set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
+
+	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
+	omap_board_config = voiceblue_config;
+	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
+	omap_serial_init();
+	omap1_usb_init(&voiceblue_usb_config);
+	omap_register_i2c_bus(1, 100, NULL, 0);
+
+	/* There is a good chance board is going up, so enable power LED
+	 * (it is connected through invertor) */
+	omap_writeb(0x00, OMAP_LPG1_LCR);
+	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
+
+	arch_reset = voiceblue_reset;
+}
+
 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	/* Maintainer: Ladislav Michl <michl@2n.cz> */
 	.boot_params	= 0x10000100,

arch/arm/mach-omap1/mcbsp.c

@@ -10,6 +10,7 @@
  *
  * Multichannel mode not supported.
  */
+#include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/clk.h>
@@ -78,100 +79,294 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 };
 
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+struct resource omap7xx_mcbsp_res[][6] = {
+	{
+		{
+			.start = OMAP7XX_MCBSP1_BASE,
+			.end   = OMAP7XX_MCBSP1_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_7XX_McBSP1RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_7XX_McBSP1TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = OMAP_DMA_MCBSP1_RX,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = OMAP_DMA_MCBSP1_TX,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+	{
+		{
+			.start = OMAP7XX_MCBSP2_BASE,
+			.end   = OMAP7XX_MCBSP2_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_7XX_McBSP2RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_7XX_McBSP2TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = OMAP_DMA_MCBSP3_RX,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = OMAP_DMA_MCBSP3_TX,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+};
+
+#define omap7xx_mcbsp_res_0		omap7xx_mcbsp_res[0]
+
 static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
 	{
-		.phys_base	= OMAP7XX_MCBSP1_BASE,
-		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
-		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
-		.rx_irq		= INT_7XX_McBSP1RX,
-		.tx_irq		= INT_7XX_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
-		.phys_base	= OMAP7XX_MCBSP2_BASE,
-		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
-		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
-		.rx_irq		= INT_7XX_McBSP2RX,
-		.tx_irq		= INT_7XX_McBSP2TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 };
-#define OMAP7XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap7xx_mcbsp_pdata)
-#define OMAP7XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
+#define OMAP7XX_MCBSP_RES_SZ		ARRAY_SIZE(omap7xx_mcbsp_res[1])
+#define OMAP7XX_MCBSP_COUNT		ARRAY_SIZE(omap7xx_mcbsp_res)
 #else
+#define omap7xx_mcbsp_res_0		NULL
 #define omap7xx_mcbsp_pdata		NULL
-#define OMAP7XX_MCBSP_PDATA_SZ		0
-#define OMAP7XX_MCBSP_REG_NUM		0
+#define OMAP7XX_MCBSP_RES_SZ		0
+#define OMAP7XX_MCBSP_COUNT		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
+struct resource omap15xx_mcbsp_res[][6] = {
+	{
+		{
+			.start = OMAP1510_MCBSP1_BASE,
+			.end   = OMAP1510_MCBSP1_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_McBSP1RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_McBSP1TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = OMAP_DMA_MCBSP1_RX,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = OMAP_DMA_MCBSP1_TX,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+	{
+		{
+			.start = OMAP1510_MCBSP2_BASE,
+			.end   = OMAP1510_MCBSP2_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_1510_SPI_RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_1510_SPI_TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = OMAP_DMA_MCBSP2_RX,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = OMAP_DMA_MCBSP2_TX,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+	{
+		{
+			.start = OMAP1510_MCBSP3_BASE,
+			.end   = OMAP1510_MCBSP3_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_McBSP3RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_McBSP3TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = OMAP_DMA_MCBSP3_RX,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = OMAP_DMA_MCBSP3_TX,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+};
+
+#define omap15xx_mcbsp_res_0		omap15xx_mcbsp_res[0]
+
 static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 	{
-		.phys_base	= OMAP1510_MCBSP1_BASE,
-		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
-		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
-		.rx_irq		= INT_McBSP1RX,
-		.tx_irq		= INT_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
-		.phys_base	= OMAP1510_MCBSP2_BASE,
-		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
-		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
-		.rx_irq		= INT_1510_SPI_RX,
-		.tx_irq		= INT_1510_SPI_TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
-		.phys_base	= OMAP1510_MCBSP3_BASE,
-		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
-		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
-		.rx_irq		= INT_McBSP3RX,
-		.tx_irq		= INT_McBSP3TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 };
-#define OMAP15XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap15xx_mcbsp_pdata)
-#define OMAP15XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
+#define OMAP15XX_MCBSP_RES_SZ		ARRAY_SIZE(omap15xx_mcbsp_res[1])
+#define OMAP15XX_MCBSP_COUNT		ARRAY_SIZE(omap15xx_mcbsp_res)
 #else
+#define omap15xx_mcbsp_res_0		NULL
 #define omap15xx_mcbsp_pdata		NULL
-#define OMAP15XX_MCBSP_PDATA_SZ		0
-#define OMAP15XX_MCBSP_REG_NUM		0
+#define OMAP15XX_MCBSP_RES_SZ		0
+#define OMAP15XX_MCBSP_COUNT		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP16XX
+struct resource omap16xx_mcbsp_res[][6] = {
+	{
+		{
+			.start = OMAP1610_MCBSP1_BASE,
+			.end   = OMAP1610_MCBSP1_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_McBSP1RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_McBSP1TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = OMAP_DMA_MCBSP1_RX,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = OMAP_DMA_MCBSP1_TX,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+	{
+		{
+			.start = OMAP1610_MCBSP2_BASE,
+			.end   = OMAP1610_MCBSP2_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_1610_McBSP2_RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_1610_McBSP2_TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = OMAP_DMA_MCBSP2_RX,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = OMAP_DMA_MCBSP2_TX,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+	{
+		{
+			.start = OMAP1610_MCBSP3_BASE,
+			.end   = OMAP1610_MCBSP3_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_McBSP3RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_McBSP3TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = OMAP_DMA_MCBSP3_RX,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = OMAP_DMA_MCBSP3_TX,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+};
+
+#define omap16xx_mcbsp_res_0		omap16xx_mcbsp_res[0]
+
 static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	{
-		.phys_base	= OMAP1610_MCBSP1_BASE,
-		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
-		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
-		.rx_irq		= INT_McBSP1RX,
-		.tx_irq		= INT_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
-		.phys_base	= OMAP1610_MCBSP2_BASE,
-		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
-		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
-		.rx_irq		= INT_1610_McBSP2_RX,
-		.tx_irq		= INT_1610_McBSP2_TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
-		.phys_base	= OMAP1610_MCBSP3_BASE,
-		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
-		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
-		.rx_irq		= INT_McBSP3RX,
-		.tx_irq		= INT_McBSP3TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 };
-#define OMAP16XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap16xx_mcbsp_pdata)
-#define OMAP16XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
+#define OMAP16XX_MCBSP_RES_SZ		ARRAY_SIZE(omap16xx_mcbsp_res[1])
+#define OMAP16XX_MCBSP_COUNT		ARRAY_SIZE(omap16xx_mcbsp_res)
 #else
+#define omap16xx_mcbsp_res_0		NULL
 #define omap16xx_mcbsp_pdata		NULL
-#define OMAP16XX_MCBSP_PDATA_SZ		0
-#define OMAP16XX_MCBSP_REG_NUM		0
+#define OMAP16XX_MCBSP_RES_SZ		0
+#define OMAP16XX_MCBSP_COUNT		0
 #endif
 
 static int __init omap1_mcbsp_init(void)
@@ -179,16 +374,12 @@ static int __init omap1_mcbsp_init(void)
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
 
-	if (cpu_is_omap7xx()) {
-		omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
-		omap_mcbsp_cache_size = OMAP7XX_MCBSP_REG_NUM * sizeof(u16);
-	} else if (cpu_is_omap15xx()) {
-		omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
-		omap_mcbsp_cache_size = OMAP15XX_MCBSP_REG_NUM * sizeof(u16);
-	} else if (cpu_is_omap16xx()) {
-		omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ;
-		omap_mcbsp_cache_size = OMAP16XX_MCBSP_REG_NUM * sizeof(u16);
-	}
+	if (cpu_is_omap7xx())
+		omap_mcbsp_count = OMAP7XX_MCBSP_COUNT;
+	else if (cpu_is_omap15xx())
+		omap_mcbsp_count = OMAP15XX_MCBSP_COUNT;
+	else if (cpu_is_omap16xx())
+		omap_mcbsp_count = OMAP16XX_MCBSP_COUNT;
 
 	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
 								GFP_KERNEL);
@@ -196,16 +387,22 @@ static int __init omap1_mcbsp_init(void)
 		return -ENOMEM;
 
 	if (cpu_is_omap7xx())
-		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata,
-						OMAP7XX_MCBSP_PDATA_SZ);
+		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0,
+					OMAP7XX_MCBSP_RES_SZ,
+					omap7xx_mcbsp_pdata,
+					OMAP7XX_MCBSP_COUNT);
 
 	if (cpu_is_omap15xx())
-		omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata,
-						OMAP15XX_MCBSP_PDATA_SZ);
+		omap_mcbsp_register_board_cfg(omap15xx_mcbsp_res_0,
+					OMAP15XX_MCBSP_RES_SZ,
+					omap15xx_mcbsp_pdata,
+					OMAP15XX_MCBSP_COUNT);
 
 	if (cpu_is_omap16xx())
-		omap_mcbsp_register_board_cfg(omap16xx_mcbsp_pdata,
-						OMAP16XX_MCBSP_PDATA_SZ);
+		omap_mcbsp_register_board_cfg(omap16xx_mcbsp_res_0,
+					OMAP16XX_MCBSP_RES_SZ,
+					omap16xx_mcbsp_pdata,
+					OMAP16XX_MCBSP_COUNT);
 
 	return omap_mcbsp_init();
 }

arch/arm/mach-omap1/reset.c

+/*
+ * OMAP1 reset support
+ */
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/system.h>
+#include <plat/prcm.h>
+
+void omap1_arch_reset(char mode, const char *cmd)
+{
+	/*
+	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+	 * "Global Software Reset Affects Traffic Controller Frequency".
+	 */
+	if (cpu_is_omap5912()) {
+		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
+		omap_writew(0x8, ARM_RSTCT1);
+	}
+
+	omap_writew(1, ARM_RSTCT1);
+}
+
+void (*arch_reset)(char, const char *) = omap1_arch_reset;

arch/arm/mach-omap2/Kconfig

@@ -54,25 +54,30 @@ config ARCH_OMAP4
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
-config ARCH_OMAP2420
+config SOC_OMAP2420
 	bool "OMAP2420 support"
 	depends on ARCH_OMAP2
 	default y
 	select OMAP_DM_TIMER
 	select ARCH_OMAP_OTG
 
-config ARCH_OMAP2430
+config SOC_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP2
 	default y
 	select ARCH_OMAP_OTG
 
-config ARCH_OMAP3430
+config SOC_OMAP3430
 	bool "OMAP3430 support"
 	depends on ARCH_OMAP3
 	default y
 	select ARCH_OMAP_OTG
 
+config SOC_OMAPTI816X
+	bool "TI816X support"
+	depends on ARCH_OMAP3
+	default y
+
 config OMAP_PACKAGE_ZAF
        bool
 
@@ -107,25 +112,25 @@ config MACH_OMAP_GENERIC
 
 config MACH_OMAP2_TUSB6010
 	bool
-	depends on ARCH_OMAP2 && ARCH_OMAP2420
+	depends on ARCH_OMAP2 && SOC_OMAP2420
 	default y if MACH_NOKIA_N8X0
 
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
-	depends on ARCH_OMAP2420
+	depends on SOC_OMAP2420
 	default y
 	select OMAP_PACKAGE_ZAF
 	select OMAP_DEBUG_DEVICES
 
 config MACH_OMAP_APOLLON
 	bool "OMAP 2420 Apollon board"
-	depends on ARCH_OMAP2420
+	depends on SOC_OMAP2420
 	default y
 	select OMAP_PACKAGE_ZAC
 
 config MACH_OMAP_2430SDP
 	bool "OMAP 2430 SDP board"
-	depends on ARCH_OMAP2430
+	depends on SOC_OMAP2430
 	default y
 	select OMAP_PACKAGE_ZAC
 
@@ -220,7 +225,7 @@ config MACH_NOKIA_N810_WIMAX
 
 config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
-	depends on ARCH_OMAP2420
+	depends on SOC_OMAP2420
 	default y
 	select OMAP_PACKAGE_ZAC
 	select MACH_NOKIA_N800
@@ -295,12 +300,18 @@ config MACH_OMAP_3630SDP
 	default y
 	select OMAP_PACKAGE_CBP
 
+config MACH_TI8168EVM
+	bool "TI8168 Evaluation Module"
+	depends on SOC_OMAPTI816X
+	default y
+
 config MACH_OMAP_4430SDP
 	bool "OMAP 4430 SDP board"
 	default y
 	depends on ARCH_OMAP4
 	select OMAP_PACKAGE_CBL
 	select OMAP_PACKAGE_CBS
+	select REGULATOR_FIXED_VOLTAGE
 
 config MACH_OMAP4_PANDA
 	bool "OMAP4 Panda Board"
@@ -308,6 +319,7 @@ config MACH_OMAP4_PANDA
 	depends on ARCH_OMAP4
 	select OMAP_PACKAGE_CBL
 	select OMAP_PACKAGE_CBS
+	select REGULATOR_FIXED_VOLTAGE
 
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"

arch/arm/mach-omap2/Makefile

@@ -31,8 +31,8 @@ AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
 AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a$(plus_sec)
 
 # Functions loaded to SRAM
-obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
-obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
+obj-$(CONFIG_SOC_OMAP2420)		+= sram242x.o
+obj-$(CONFIG_SOC_OMAP2430)		+= sram243x.o
 obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
 AFLAGS_sram242x.o			:=-Wa,-march=armv6
@@ -40,8 +40,8 @@ AFLAGS_sram243x.o			:=-Wa,-march=armv6
 AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 
 # Pin multiplexing
-obj-$(CONFIG_ARCH_OMAP2420)		+= mux2420.o
-obj-$(CONFIG_ARCH_OMAP2430)		+= mux2430.o
+obj-$(CONFIG_SOC_OMAP2420)		+= mux2420.o
+obj-$(CONFIG_SOC_OMAP2430)		+= mux2430.o
 obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= mux44xx.o
 
@@ -59,10 +59,10 @@ endif
 # Power Management
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
-obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o pm_bus.o voltage.o
-obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o voltage.o \
+obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o pm_bus.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o \
 					   cpuidle34xx.o pm_bus.o
-obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o voltage.o pm_bus.o
+obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o pm_bus.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
 obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
@@ -78,13 +78,25 @@ endif
 
 # PRCM
 obj-$(CONFIG_ARCH_OMAP2)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
+					   vc3xxx_data.o vp3xxx_data.o
 # XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
 # will be removed once the OMAP4 part of the codebase is converted to
 # use OMAP4-specific PRCM functions.
 obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cm2xxx_3xxx.o cminst44xx.o \
 					   cm44xx.o prcm_mpu44xx.o \
-					   prminst44xx.o
+					   prminst44xx.o vc44xx_data.o \
+					   vp44xx_data.o
+
+# OMAP voltage domains
+ifeq ($(CONFIG_PM),y)
+voltagedomain-common			:= voltage.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(voltagedomain-common)
+obj-$(CONFIG_ARCH_OMAP3)		+= $(voltagedomain-common) \
+					   voltagedomains3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common) \
+					   voltagedomains44xx_data.o
+endif
 
 # OMAP powerdomain framework
 powerdomain-common			+= powerdomain.o powerdomain-common.o
@@ -102,39 +114,49 @@ obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common) \
 
 # PRCM clockdomain control
 obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain.o \
+					   clockdomain2xxx_3xxx.o \
 					   clockdomains2xxx_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain.o \
+					   clockdomain2xxx_3xxx.o \
 					   clockdomains2xxx_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain.o \
+					   clockdomain44xx.o \
 					   clockdomains44xx_data.o
+
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o \
 					   clkt2xxx_sys.o \
 					   clkt2xxx_dpllcore.o \
 					   clkt2xxx_virt_prcm_set.o \
-					   clkt2xxx_apll.o clkt2xxx_osc.o
-obj-$(CONFIG_ARCH_OMAP2420)		+= clock2420_data.o
-obj-$(CONFIG_ARCH_OMAP2430)		+= clock2430.o clock2430_data.o
+					   clkt2xxx_apll.o clkt2xxx_osc.o \
+					   clkt2xxx_dpll.o clkt_iclk.o
+obj-$(CONFIG_SOC_OMAP2420)		+= clock2420_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o clock2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o \
 					   clock34xx.o clkt34xx_dpll3m2.o \
 					   clock3517.o clock36xx.o \
-					   dpll3xxx.o clock3xxx_data.o
+					   dpll3xxx.o clock3xxx_data.o \
+					   clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o \
-					   dpll3xxx.o
+					   dpll3xxx.o dpll44xx.o
 
 # OMAP2 clock rate set data (old "OPP" data)
-obj-$(CONFIG_ARCH_OMAP2420)		+= opp2420_data.o
-obj-$(CONFIG_ARCH_OMAP2430)		+= opp2430_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= opp2430_data.o
 
 # hwmod data
-obj-$(CONFIG_ARCH_OMAP2420)		+= omap_hwmod_2420_data.o
-obj-$(CONFIG_ARCH_OMAP2430)		+= omap_hwmod_2430_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2420_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 
 # EMU peripherals
 obj-$(CONFIG_OMAP3_EMU)			+= emu.o
 
+# L3 interconnect
+obj-$(CONFIG_ARCH_OMAP3)		+= omap_l3_smx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= omap_l3_noc.o
+
 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o
 
@@ -218,12 +240,14 @@ obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o \
 					   hsmmc.o \
 					   omap_phy_internal.o
 
-obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
+obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o \
+					   omap_phy_internal.o \
 
 obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
 
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
 					   hsmmc.o
+obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
 # Platform specific device init code
 usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
 obj-y					+= $(usbfs-m) $(usbfs-y)
@@ -242,3 +266,7 @@ obj-y					+= $(smc91x-m) $(smc91x-y)
 
 smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
 obj-y					+= $(smsc911x-m) $(smsc911x-y)
+obj-$(CONFIG_ARCH_OMAP4)		+= hwspinlock.o
+
+disp-$(CONFIG_OMAP2_DSS)		:= display.o
+obj-y					+= $(disp-m) $(disp-y)

arch/arm/mach-omap2/board-2430sdp.c

@@ -22,6 +22,7 @@
 #include <linux/mmc/host.h>
 #include <linux/delay.h>
 #include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -139,15 +140,31 @@ static struct omap_board_config_kernel sdp2430_config[] __initdata = {
 	{OMAP_TAG_LCD, &sdp2430_lcd_config},
 };
 
-static void __init omap_2430sdp_init_irq(void)
+static void __init omap_2430sdp_init_early(void)
 {
-	omap_board_config = sdp2430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
+static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data sdp2430_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(sdp2430_vmmc1_supplies),
+	.consumer_supplies	= &sdp2430_vmmc1_supplies[0],
+};
+
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -160,6 +177,7 @@ static struct twl4030_platform_data sdp2430_twldata = {
 
 	/* platform_data for children goes here */
 	.gpio		= &sdp2430_gpio_data,
+	.vmmc1		= &sdp2430_vmmc1,
 };
 
 static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = {
@@ -226,6 +244,9 @@ static void __init omap_2430sdp_init(void)
 
 	omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
 
+	omap_board_config = sdp2430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
+
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
@@ -253,9 +274,10 @@ static void __init omap_2430sdp_map_io(void)
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.boot_params	= 0x80000100,
-	.map_io		= omap_2430sdp_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_2430sdp_init_irq,
+	.map_io		= omap_2430sdp_map_io,
+	.init_early	= omap_2430sdp_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_2430sdp_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-3430sdp.c

@@ -307,34 +307,16 @@ static struct omap_dss_board_info sdp3430_dss_data = {
 	.default_device	= &sdp3430_lcd_device,
 };
 
-static struct platform_device sdp3430_dss_device = {
-	.name		= "omapdss",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &sdp3430_dss_data,
-	},
-};
-
-static struct regulator_consumer_supply sdp3430_vdda_dac_supply = {
-	.supply		= "vdda_dac",
-	.dev		= &sdp3430_dss_device.dev,
-};
-
-static struct platform_device *sdp3430_devices[] __initdata = {
-	&sdp3430_dss_device,
-};
+static struct regulator_consumer_supply sdp3430_vdda_dac_supply =
+	REGULATOR_SUPPLY("vdda_dac", "omapdss");
 
 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
 };
 
-static void __init omap_3430sdp_init_irq(void)
+static void __init omap_3430sdp_init_early(void)
 {
-	omap_board_config = sdp3430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
-	omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
-	omap_init_irq();
 }
 
 static int sdp3430_batt_table[] = {
@@ -370,18 +352,6 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
-	.supply			= "vmmc",
-};
-
-static struct regulator_consumer_supply sdp3430_vsim_supply = {
-	.supply			= "vmmc_aux",
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
-	.supply			= "vmmc",
-};
-
 static int sdp3430_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -392,13 +362,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
 	mmc[1].gpio_cd = gpio + 1;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters ... we "know" the
-	 * regulators will be set up only *after* we return.
-	 */
-	sdp3430_vmmc1_supply.dev = mmc[0].dev;
-	sdp3430_vsim_supply.dev = mmc[0].dev;
-	sdp3430_vmmc2_supply.dev = mmc[1].dev;
-
 	/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
 	gpio_request(gpio + 7, "sub_lcd_en_bkl");
 	gpio_direction_output(gpio + 7, 0);
@@ -427,6 +390,34 @@ static struct twl4030_madc_platform_data sdp3430_madc_data = {
 	.irq_line	= 1,
 };
 
+/* regulator consumer mappings */
+
+/* ads7846 on SPI */
+static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
+	REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
+
+static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
+	REGULATOR_SUPPLY("vdda_dac", "omapdss"),
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+};
+
+static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
+
+static struct regulator_consumer_supply sdp3430_vsim_supplies[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
+};
+
+static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
+
 /*
  * Apply all the fixed voltages since most versions of U-Boot
  * don't bother with that initialization.
@@ -469,6 +460,8 @@ static struct regulator_init_data sdp3430_vaux3 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies		= ARRAY_SIZE(sdp3430_vaux3_supplies),
+	.consumer_supplies		= sdp3430_vaux3_supplies,
 };
 
 /* VAUX4 for OMAP VDD_CSI2 (camera) */
@@ -495,8 +488,8 @@ static struct regulator_init_data sdp3430_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vmmc1_supplies),
+	.consumer_supplies	= sdp3430_vmmc1_supplies,
 };
 
 /* VMMC2 for MMC2 card */
@@ -510,8 +503,8 @@ static struct regulator_init_data sdp3430_vmmc2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vmmc2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vmmc2_supplies),
+	.consumer_supplies	= sdp3430_vmmc2_supplies,
 };
 
 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
@@ -525,8 +518,8 @@ static struct regulator_init_data sdp3430_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vsim_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vsim_supplies),
+	.consumer_supplies	= sdp3430_vsim_supplies,
 };
 
 /* VDAC for DSS driving S-Video */
@@ -540,16 +533,8 @@ static struct regulator_init_data sdp3430_vdac = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
-	{
-		.supply		= "vdds_dsi",
-		.dev		= &sdp3430_dss_device.dev,
-	}
+	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vdda_dac_supplies),
+	.consumer_supplies	= sdp3430_vdda_dac_supplies,
 };
 
 static struct regulator_init_data sdp3430_vpll2 = {
@@ -567,9 +552,7 @@ static struct regulator_init_data sdp3430_vpll2 = {
 	.consumer_supplies	= sdp3430_vpll2_supplies,
 };
 
-static struct twl4030_codec_audio_data sdp3430_audio = {
-	.audio_mclk = 26000000,
-};
+static struct twl4030_codec_audio_data sdp3430_audio;
 
 static struct twl4030_codec_data sdp3430_codec = {
 	.audio_mclk = 26000000,
@@ -669,6 +652,106 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
+
+static struct omap_device_pad serial1_pads[] __initdata = {
+	/*
+	 * Note that off output enable is an active low
+	 * signal. So setting this means pin is a
+	 * input enabled in off mode
+	 */
+	OMAP_MUX_STATIC("uart1_cts.uart1_cts",
+			 OMAP_PIN_INPUT |
+			 OMAP_PIN_OFF_INPUT_PULLDOWN |
+			 OMAP_OFFOUT_EN |
+			 OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart1_rts.uart1_rts",
+			 OMAP_PIN_OUTPUT |
+			 OMAP_OFF_EN |
+			 OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart1_rx.uart1_rx",
+			 OMAP_PIN_INPUT |
+			 OMAP_PIN_OFF_INPUT_PULLDOWN |
+			 OMAP_OFFOUT_EN |
+			 OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart1_tx.uart1_tx",
+			 OMAP_PIN_OUTPUT |
+			 OMAP_OFF_EN |
+			 OMAP_MUX_MODE0),
+};
+
+static struct omap_device_pad serial2_pads[] __initdata = {
+	OMAP_MUX_STATIC("uart2_cts.uart2_cts",
+			 OMAP_PIN_INPUT_PULLUP |
+			 OMAP_PIN_OFF_INPUT_PULLDOWN |
+			 OMAP_OFFOUT_EN |
+			 OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart2_rts.uart2_rts",
+			 OMAP_PIN_OUTPUT |
+			 OMAP_OFF_EN |
+			 OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart2_rx.uart2_rx",
+			 OMAP_PIN_INPUT |
+			 OMAP_PIN_OFF_INPUT_PULLDOWN |
+			 OMAP_OFFOUT_EN |
+			 OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart2_tx.uart2_tx",
+			 OMAP_PIN_OUTPUT |
+			 OMAP_OFF_EN |
+			 OMAP_MUX_MODE0),
+};
+
+static struct omap_device_pad serial3_pads[] __initdata = {
+	OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
+			 OMAP_PIN_INPUT_PULLDOWN |
+			 OMAP_PIN_OFF_INPUT_PULLDOWN |
+			 OMAP_OFFOUT_EN |
+			 OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
+			 OMAP_PIN_OUTPUT |
+			 OMAP_OFF_EN |
+			 OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
+			 OMAP_PIN_INPUT |
+			 OMAP_PIN_OFF_INPUT_PULLDOWN |
+			 OMAP_OFFOUT_EN |
+			 OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
+			 OMAP_PIN_OUTPUT |
+			 OMAP_OFF_EN |
+			 OMAP_MUX_MODE0),
+};
+
+static struct omap_board_data serial1_data = {
+	.id		= 0,
+	.pads		= serial1_pads,
+	.pads_cnt	= ARRAY_SIZE(serial1_pads),
+};
+
+static struct omap_board_data serial2_data = {
+	.id		= 1,
+	.pads		= serial2_pads,
+	.pads_cnt	= ARRAY_SIZE(serial2_pads),
+};
+
+static struct omap_board_data serial3_data = {
+	.id		= 2,
+	.pads		= serial3_pads,
+	.pads_cnt	= ARRAY_SIZE(serial3_pads),
+};
+
+static inline void board_serial_init(void)
+{
+	omap_serial_init_port(&serial1_data);
+	omap_serial_init_port(&serial2_data);
+	omap_serial_init_port(&serial3_data);
+}
+#else
+#define board_mux	NULL
+
+static inline void board_serial_init(void)
+{
+	omap_serial_init();
+}
 #endif
 
 /*
@@ -800,8 +883,11 @@ static struct omap_musb_board_data musb_board_data = {
 static void __init omap_3430sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_board_config = sdp3430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+	omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
 	omap3430_i2c_init();
-	platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
+	omap_display_init(&sdp3430_dss_data);
 	if (omap_rev() > OMAP3430_REV_ES1_0)
 		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
 	else
@@ -810,10 +896,10 @@ static void __init omap_3430sdp_init(void)
 	spi_register_board_info(sdp3430_spi_board_info,
 				ARRAY_SIZE(sdp3430_spi_board_info));
 	ads7846_dev_init();
-	omap_serial_init();
+	board_serial_init();
 	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
-	board_flash_init(sdp_flash_partitions, chip_sel_3430);
+	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
 	usbhs_init(&usbhs_bdata);
@@ -822,9 +908,10 @@ static void __init omap_3430sdp_init(void)
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_3430sdp_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap_3430sdp_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_3430sdp_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-3630sdp.c

@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -69,14 +70,11 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 static struct omap_board_config_kernel sdp_config[] __initdata = {
 };
 
-static void __init omap_sdp_init_irq(void)
+static void __init omap_sdp_init_early(void)
 {
-	omap_board_config = sdp_config;
-	omap_board_config_size = ARRAY_SIZE(sdp_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
 				  h8mbx00u0mer0em_sdrc_params);
-	omap_init_irq();
 }
 
 #ifdef CONFIG_OMAP_MUX
@@ -206,19 +204,22 @@ static struct flash_partitions sdp_flash_partitions[] = {
 static void __init omap_sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+	omap_board_config = sdp_config;
+	omap_board_config_size = ARRAY_SIZE(sdp_config);
 	zoom_peripherals_init();
 	zoom_display_init();
 	board_smc91x_init();
-	board_flash_init(sdp_flash_partitions, chip_sel_sdp);
+	board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
 	enable_board_wakeup_source();
 	usbhs_init(&usbhs_bdata);
 }
 
 MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_sdp_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap_sdp_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_sdp_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-4430sdp.c

@@ -35,6 +35,7 @@
 #include <plat/common.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
+#include <plat/omap4-keypad.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -47,6 +48,90 @@
 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO	184
 #define OMAP4_SFH7741_ENABLE_GPIO		188
 
+static const int sdp4430_keymap[] = {
+	KEY(0, 0, KEY_E),
+	KEY(0, 1, KEY_R),
+	KEY(0, 2, KEY_T),
+	KEY(0, 3, KEY_HOME),
+	KEY(0, 4, KEY_F5),
+	KEY(0, 5, KEY_UNKNOWN),
+	KEY(0, 6, KEY_I),
+	KEY(0, 7, KEY_LEFTSHIFT),
+
+	KEY(1, 0, KEY_D),
+	KEY(1, 1, KEY_F),
+	KEY(1, 2, KEY_G),
+	KEY(1, 3, KEY_SEND),
+	KEY(1, 4, KEY_F6),
+	KEY(1, 5, KEY_UNKNOWN),
+	KEY(1, 6, KEY_K),
+	KEY(1, 7, KEY_ENTER),
+
+	KEY(2, 0, KEY_X),
+	KEY(2, 1, KEY_C),
+	KEY(2, 2, KEY_V),
+	KEY(2, 3, KEY_END),
+	KEY(2, 4, KEY_F7),
+	KEY(2, 5, KEY_UNKNOWN),
+	KEY(2, 6, KEY_DOT),
+	KEY(2, 7, KEY_CAPSLOCK),
+
+	KEY(3, 0, KEY_Z),
+	KEY(3, 1, KEY_KPPLUS),
+	KEY(3, 2, KEY_B),
+	KEY(3, 3, KEY_F1),
+	KEY(3, 4, KEY_F8),
+	KEY(3, 5, KEY_UNKNOWN),
+	KEY(3, 6, KEY_O),
+	KEY(3, 7, KEY_SPACE),
+
+	KEY(4, 0, KEY_W),
+	KEY(4, 1, KEY_Y),
+	KEY(4, 2, KEY_U),
+	KEY(4, 3, KEY_F2),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(4, 5, KEY_UNKNOWN),
+	KEY(4, 6, KEY_L),
+	KEY(4, 7, KEY_LEFT),
+
+	KEY(5, 0, KEY_S),
+	KEY(5, 1, KEY_H),
+	KEY(5, 2, KEY_J),
+	KEY(5, 3, KEY_F3),
+	KEY(5, 4, KEY_F9),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	KEY(5, 6, KEY_M),
+	KEY(5, 7, KEY_RIGHT),
+
+	KEY(6, 0, KEY_Q),
+	KEY(6, 1, KEY_A),
+	KEY(6, 2, KEY_N),
+	KEY(6, 3, KEY_BACK),
+	KEY(6, 4, KEY_BACKSPACE),
+	KEY(6, 5, KEY_UNKNOWN),
+	KEY(6, 6, KEY_P),
+	KEY(6, 7, KEY_UP),
+
+	KEY(7, 0, KEY_PROG1),
+	KEY(7, 1, KEY_PROG2),
+	KEY(7, 2, KEY_PROG3),
+	KEY(7, 3, KEY_PROG4),
+	KEY(7, 4, KEY_F4),
+	KEY(7, 5, KEY_UNKNOWN),
+	KEY(7, 6, KEY_OK),
+	KEY(7, 7, KEY_DOWN),
+};
+
+static struct matrix_keymap_data sdp4430_keymap_data = {
+	.keymap			= sdp4430_keymap,
+	.keymap_size		= ARRAY_SIZE(sdp4430_keymap),
+};
+
+static struct omap4_keypad_platform_data sdp4430_keypad_data = {
+	.keymap_data		= &sdp4430_keymap_data,
+	.rows			= 8,
+	.cols			= 8,
+};
 static struct gpio_led sdp4430_gpio_leds[] = {
 	{
 		.name	= "omap4:green:debug0",
@@ -238,16 +323,13 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
 };
 
-static void __init omap_4430sdp_init_irq(void)
+static void __init omap_4430sdp_init_early(void)
 {
-	omap_board_config = sdp4430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(1);
 #endif
-	gic_init_irq();
 }
 
 static struct omap_musb_board_data musb_board_data = {
@@ -265,11 +347,6 @@ static struct twl4030_usb_data omap4_usbphy_data = {
 };
 
 static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_wp	= -EINVAL,
-	},
 	{
 		.mmc		= 2,
 		.caps		=  MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
@@ -278,19 +355,24 @@ static struct omap2_hsmmc_info mmc[] = {
 		.nonremovable   = true,
 		.ocr_mask	= MMC_VDD_29_30,
 	},
+	{
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+		.gpio_wp	= -EINVAL,
+	},
 	{}	/* Terminator */
 };
 
 static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.1",
+		.dev_name = "omap_hsmmc.1",
 	},
 };
 static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.0",
+		.dev_name = "omap_hsmmc.0",
 	},
 };
 
@@ -424,7 +506,6 @@ static struct regulator_init_data sdp4430_vana = {
 	.constraints = {
 		.min_uV			= 2100000,
 		.max_uV			= 2100000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
@@ -436,7 +517,6 @@ static struct regulator_init_data sdp4430_vcxio = {
 	.constraints = {
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
@@ -448,7 +528,6 @@ static struct regulator_init_data sdp4430_vdac = {
 	.constraints = {
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
@@ -547,9 +626,76 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
+
+static struct omap_device_pad serial2_pads[] __initdata = {
+	OMAP_MUX_STATIC("uart2_cts.uart2_cts",
+			 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart2_rts.uart2_rts",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart2_rx.uart2_rx",
+			 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart2_tx.uart2_tx",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+static struct omap_device_pad serial3_pads[] __initdata = {
+	OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
+			 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
+			 OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+static struct omap_device_pad serial4_pads[] __initdata = {
+	OMAP_MUX_STATIC("uart4_rx.uart4_rx",
+			 OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart4_tx.uart4_tx",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+static struct omap_board_data serial2_data = {
+	.id		= 1,
+	.pads		= serial2_pads,
+	.pads_cnt	= ARRAY_SIZE(serial2_pads),
+};
+
+static struct omap_board_data serial3_data = {
+	.id		= 2,
+	.pads		= serial3_pads,
+	.pads_cnt	= ARRAY_SIZE(serial3_pads),
+};
+
+static struct omap_board_data serial4_data = {
+	.id		= 3,
+	.pads		= serial4_pads,
+	.pads_cnt	= ARRAY_SIZE(serial4_pads),
+};
+
+static inline void board_serial_init(void)
+{
+	struct omap_board_data bdata;
+	bdata.flags	= 0;
+	bdata.pads	= NULL;
+	bdata.pads_cnt	= 0;
+	bdata.id	= 0;
+	/* pass dummy data for UART1 */
+	omap_serial_init_port(&bdata);
+
+	omap_serial_init_port(&serial2_data);
+	omap_serial_init_port(&serial3_data);
+	omap_serial_init_port(&serial4_data);
+}
 #else
 #define board_mux	NULL
-#endif
+
+static inline void board_serial_init(void)
+{
+	omap_serial_init();
+}
+ #endif
 
 static void __init omap_4430sdp_init(void)
 {
@@ -560,10 +706,13 @@ static void __init omap_4430sdp_init(void)
 		package = OMAP_PACKAGE_CBL;
 	omap4_mux_init(board_mux, package);
 
+	omap_board_config = sdp4430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
+
 	omap4_i2c_init();
 	omap_sfh7741prox_init();
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
-	omap_serial_init();
+	board_serial_init();
 	omap4_twl6030_hsmmc_init(mmc);
 
 	usb_musb_init(&musb_board_data);
@@ -576,6 +725,10 @@ static void __init omap_4430sdp_init(void)
 		spi_register_board_info(sdp4430_spi_board_info,
 				ARRAY_SIZE(sdp4430_spi_board_info));
 	}
+
+	status = omap4_keyboard_init(&sdp4430_keypad_data);
+	if (status)
+		pr_err("Keypad initialization failed: %d\n", status);
 }
 
 static void __init omap_4430sdp_map_io(void)
@@ -587,9 +740,10 @@ static void __init omap_4430sdp_map_io(void)
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
 	.boot_params	= 0x80000100,
-	.map_io		= omap_4430sdp_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_4430sdp_init_irq,
+	.map_io		= omap_4430sdp_map_io,
+	.init_early	= omap_4430sdp_init_early,
+	.init_irq	= gic_init_irq,
 	.init_machine	= omap_4430sdp_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-am3517crane.c

@@ -49,14 +49,10 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
-static void __init am3517_crane_init_irq(void)
+static void __init am3517_crane_init_early(void)
 {
-	omap_board_config = am3517_crane_config;
-	omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
-
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 static struct usbhs_omap_board_data usbhs_bdata __initdata = {
@@ -77,6 +73,9 @@ static void __init am3517_crane_init(void)
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
 
+	omap_board_config = am3517_crane_config;
+	omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
+
 	/* Configure GPIO for EHCI port */
 	if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
 		pr_err("Can not configure mux for GPIO_USB_NRESET %d\n",
@@ -108,9 +107,10 @@ static void __init am3517_crane_init(void)
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= am3517_crane_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= am3517_crane_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= am3517_crane_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-am3517evm.c

@@ -199,6 +199,9 @@ static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 };
 static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1A),
+	},
 	{
 		I2C_BOARD_INFO("tca6416", 0x21),
 		.platform_data = &am3517evm_gpio_expander_info_0,
@@ -378,37 +381,23 @@ static struct omap_dss_board_info am3517_evm_dss_data = {
 	.default_device	= &am3517_evm_lcd_device,
 };
 
-static struct platform_device am3517_evm_dss_device = {
-	.name		= "omapdss",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &am3517_evm_dss_data,
-	},
-};
-
 /*
  * Board initialization
  */
-static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
-};
-
-static struct platform_device *am3517_evm_devices[] __initdata = {
-	&am3517_evm_dss_device,
-};
-
-static void __init am3517_evm_init_irq(void)
+static void __init am3517_evm_init_early(void)
 {
-	omap_board_config = am3517_evm_config;
-	omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type         = MUSB_INTERFACE_ULPI,
 	.mode                   = MUSB_OTG,
 	.power                  = 500,
+	.set_phy_power		= am35x_musb_phy_power,
+	.clear_irq		= am35x_musb_clear_irq,
+	.set_mode		= am35x_musb_set_mode,
+	.reset			= am35x_musb_reset,
 };
 
 static __init void am3517_evm_musb_init(void)
@@ -490,14 +479,17 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
 	platform_device_register(&am3517_hecc_device);
 }
 
+static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
+};
+
 static void __init am3517_evm_init(void)
 {
+	omap_board_config = am3517_evm_config;
+	omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
 	am3517_evm_i2c_init();
-	platform_add_devices(am3517_evm_devices,
-				ARRAY_SIZE(am3517_evm_devices));
-
+	omap_display_init(&am3517_evm_dss_data);
 	omap_serial_init();
 
 	/* Configure GPIO for EHCI port */
@@ -521,9 +513,10 @@ static void __init am3517_evm_init(void)
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= am3517_evm_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= am3517_evm_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= am3517_evm_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-apollon.c

@@ -274,13 +274,10 @@ static struct omap_board_config_kernel apollon_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
-static void __init omap_apollon_init_irq(void)
+static void __init omap_apollon_init_early(void)
 {
-	omap_board_config = apollon_config;
-	omap_board_config_size = ARRAY_SIZE(apollon_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 static void __init apollon_led_init(void)
@@ -320,6 +317,8 @@ static void __init omap_apollon_init(void)
 	u32 v;
 
 	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
+	omap_board_config = apollon_config;
+	omap_board_config_size = ARRAY_SIZE(apollon_config);
 
 	apollon_init_smc91x();
 	apollon_led_init();
@@ -355,9 +354,10 @@ static void __init omap_apollon_map_io(void)
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
 	.boot_params	= 0x80000100,
-	.map_io		= omap_apollon_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_apollon_init_irq,
+	.map_io		= omap_apollon_map_io,
+	.init_early	= omap_apollon_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_apollon_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t35.c

@@ -401,14 +401,6 @@ static struct omap_dss_board_info cm_t35_dss_data = {
 	.default_device	= &cm_t35_dvi_device,
 };
 
-static struct platform_device cm_t35_dss_device = {
-	.name		= "omapdss",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cm_t35_dss_data,
-	},
-};
-
 static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
 	.turbo_mode	= 0,
 	.single_channel	= 1,	/* 0: slave, 1: master */
@@ -468,7 +460,7 @@ static void __init cm_t35_init_display(void)
 	msleep(50);
 	gpio_set_value(lcd_en_gpio, 1);
 
-	err = platform_device_register(&cm_t35_dss_device);
+	err = omap_display_init(&cm_t35_dss_data);
 	if (err) {
 		pr_err("CM-T35: failed to register DSS device\n");
 		goto err_dev_reg;
@@ -495,15 +487,11 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = {
 	.supply			= "vmmc_aux",
 };
 
-static struct regulator_consumer_supply cm_t35_vdac_supply = {
-	.supply		= "vdda_dac",
-	.dev		= &cm_t35_dss_device.dev,
-};
+static struct regulator_consumer_supply cm_t35_vdac_supply =
+	REGULATOR_SUPPLY("vdda_dac", "omapdss");
 
-static struct regulator_consumer_supply cm_t35_vdvi_supply = {
-	.supply		= "vdvi",
-	.dev		= &cm_t35_dss_device.dev,
-};
+static struct regulator_consumer_supply cm_t35_vdvi_supply =
+	REGULATOR_SUPPLY("vdvi", "omapdss");
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data cm_t35_vmmc1 = {
@@ -680,20 +668,14 @@ static void __init cm_t35_init_i2c(void)
 			      ARRAY_SIZE(cm_t35_i2c_boardinfo));
 }
 
-static struct omap_board_config_kernel cm_t35_config[] __initdata = {
-};
-
-static void __init cm_t35_init_irq(void)
+static void __init cm_t35_init_early(void)
 {
-	omap_board_config = cm_t35_config;
-	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
-
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
 }
 
+#ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* nCS and IRQ for CM-T35 ethernet */
 	OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
@@ -791,6 +773,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
+#endif
 
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type		= MUSB_INTERFACE_ULPI,
@@ -798,8 +781,13 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
+static struct omap_board_config_kernel cm_t35_config[] __initdata = {
+};
+
 static void __init cm_t35_init(void)
 {
+	omap_board_config = cm_t35_config;
+	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_serial_init();
 	cm_t35_init_i2c();
@@ -815,9 +803,10 @@ static void __init cm_t35_init(void)
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= cm_t35_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= cm_t35_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= cm_t35_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t3517.c

@@ -254,16 +254,13 @@ static inline void cm_t3517_init_nand(void) {}
 static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
 };
 
-static void __init cm_t3517_init_irq(void)
+static void __init cm_t3517_init_early(void)
 {
-	omap_board_config = cm_t3517_config;
-	omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
-
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
+#ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* GPIO186 - Green LED */
 	OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
@@ -289,11 +286,14 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
+#endif
 
 static void __init cm_t3517_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
+	omap_board_config = cm_t3517_config;
+	omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
 	cm_t3517_init_leds();
 	cm_t3517_init_nand();
 	cm_t3517_init_rtc();
@@ -303,9 +303,10 @@ static void __init cm_t3517_init(void)
 
 MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve        = omap_reserve,
-	.init_irq	= cm_t3517_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= cm_t3517_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= cm_t3517_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-devkit8000.c

@@ -140,7 +140,7 @@ static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
 }
 
 static struct regulator_consumer_supply devkit8000_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
 
 
 /* ads7846 on SPI */
@@ -195,14 +195,6 @@ static struct omap_dss_board_info devkit8000_dss_data = {
 	.default_device = &devkit8000_lcd_device,
 };
 
-static struct platform_device devkit8000_dss_device = {
-	.name		= "omapdss",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &devkit8000_dss_data,
-	},
-};
-
 static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
 	REGULATOR_SUPPLY("vdda_dac", "omapdss");
 
@@ -350,9 +342,7 @@ static struct twl4030_usb_data devkit8000_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static struct twl4030_codec_audio_data devkit8000_audio_data = {
-	.audio_mclk = 26000000,
-};
+static struct twl4030_codec_audio_data devkit8000_audio_data;
 
 static struct twl4030_codec_data devkit8000_codec_data = {
 	.audio_mclk = 26000000,
@@ -456,11 +446,15 @@ static struct platform_device keys_gpio = {
 };
 
 
-static void __init devkit8000_init_irq(void)
+static void __init devkit8000_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
+}
+
+static void __init devkit8000_init_irq(void)
+{
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -575,7 +569,6 @@ static void __init omap_dm9000_init(void)
 }
 
 static struct platform_device *devkit8000_devices[] __initdata = {
-	&devkit8000_dss_device,
 	&leds_gpio,
 	&keys_gpio,
 	&omap_dm9000_dev,
@@ -632,6 +625,7 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
+#ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* nCS and IRQ for Devkit8000 ethernet */
 	OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0),
@@ -785,6 +779,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
+#endif
 
 static void __init devkit8000_init(void)
 {
@@ -797,6 +792,7 @@ static void __init devkit8000_init(void)
 	platform_add_devices(devkit8000_devices,
 			ARRAY_SIZE(devkit8000_devices));
 
+	omap_display_init(&devkit8000_dss_data);
 	spi_register_board_info(devkit8000_spi_board_info,
 	ARRAY_SIZE(devkit8000_spi_board_info));
 
@@ -813,8 +809,9 @@ static void __init devkit8000_init(void)
 
 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= devkit8000_init_early,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-flash.c

 /*
- * board-sdp-flash.c
+ * board-flash.c
  * Modified from mach-omap2/board-3430sdp-flash.c
  *
  * Copyright (C) 2009 Nokia Corporation
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
+#include <plat/irqs.h>
 
 #include <plat/gpmc.h>
 #include <plat/nand.h>
@@ -73,11 +74,11 @@ __init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
 					+ FLASH_SIZE_SDPV1 - 1;
 	}
 	if (err < 0) {
-		printk(KERN_ERR "NOR: Can't request GPMC CS\n");
+		pr_err("NOR: Can't request GPMC CS\n");
 		return;
 	}
 	if (platform_device_register(&board_nor_device) < 0)
-		printk(KERN_ERR	"Unable to register NOR device\n");
+		pr_err("Unable to register NOR device\n");
 }
 
 #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
@@ -139,17 +140,21 @@ static struct omap_nand_platform_data board_nand_data = {
 };
 
 void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs)
+__init board_nand_init(struct mtd_partition *nand_parts,
+			u8 nr_parts, u8 cs, int nand_type)
 {
 	board_nand_data.cs		= cs;
 	board_nand_data.parts		= nand_parts;
 	board_nand_data.nr_parts	= nr_parts;
+	board_nand_data.devsize		= nand_type;
 
+	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
+	board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
 	gpmc_nand_init(&board_nand_data);
 }
 #else
 void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs)
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type)
 {
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
@@ -189,12 +194,12 @@ static u8 get_gpmc0_type(void)
 }
 
 /**
- * sdp3430_flash_init - Identify devices connected to GPMC and register.
+ * board_flash_init - Identify devices connected to GPMC and register.
  *
  * @return - void.
  */
 void board_flash_init(struct flash_partitions partition_info[],
-					char chip_sel_board[][GPMC_CS_NUM])
+			char chip_sel_board[][GPMC_CS_NUM], int nand_type)
 {
 	u8		cs = 0;
 	u8		norcs = GPMC_CS_NUM + 1;
@@ -208,7 +213,7 @@ void board_flash_init(struct flash_partitions partition_info[],
 	 */
 	idx = get_gpmc0_type();
 	if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
-		printk(KERN_ERR "%s: Invalid chip select: %d\n", __func__, cs);
+		pr_err("%s: Invalid chip select: %d\n", __func__, cs);
 		return;
 	}
 	config_sel = (unsigned char *)(chip_sel_board[idx]);
@@ -232,23 +237,20 @@ void board_flash_init(struct flash_partitions partition_info[],
 	}
 
 	if (norcs > GPMC_CS_NUM)
-		printk(KERN_INFO "NOR: Unable to find configuration "
-				"in GPMC\n");
+		pr_err("NOR: Unable to find configuration in GPMC\n");
 	else
 		board_nor_init(partition_info[0].parts,
 				partition_info[0].nr_parts, norcs);
 
 	if (onenandcs > GPMC_CS_NUM)
-		printk(KERN_INFO "OneNAND: Unable to find configuration "
-				"in GPMC\n");
+		pr_err("OneNAND: Unable to find configuration in GPMC\n");
 	else
 		board_onenand_init(partition_info[1].parts,
 					partition_info[1].nr_parts, onenandcs);
 
 	if (nandcs > GPMC_CS_NUM)
-		printk(KERN_INFO "NAND: Unable to find configuration "
-				"in GPMC\n");
+		pr_err("NAND: Unable to find configuration in GPMC\n");
 	else
 		board_nand_init(partition_info[2].parts,
-				partition_info[2].nr_parts, nandcs);
+			partition_info[2].nr_parts, nandcs, nand_type);
 }

arch/arm/mach-omap2/board-flash.h

@@ -25,6 +25,6 @@ struct flash_partitions {
 };
 
 extern void board_flash_init(struct flash_partitions [],
-				char chip_sel[][GPMC_CS_NUM]);
+				char chip_sel[][GPMC_CS_NUM], int nand_type);
 extern void board_nand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs);
+					u8 nr_parts, u8 cs, int nand_type);

arch/arm/mach-omap2/board-generic.c

@@ -33,18 +33,17 @@
 static struct omap_board_config_kernel generic_config[] = {
 };
 
-static void __init omap_generic_init_irq(void)
+static void __init omap_generic_init_early(void)
 {
-	omap_board_config = generic_config;
-	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 static void __init omap_generic_init(void)
 {
 	omap_serial_init();
+	omap_board_config = generic_config;
+	omap_board_config_size = ARRAY_SIZE(generic_config);
 }
 
 static void __init omap_generic_map_io(void)
@@ -68,9 +67,10 @@ static void __init omap_generic_map_io(void)
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 	.boot_params	= 0x80000100,
-	.map_io		= omap_generic_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_generic_init_irq,
+	.map_io		= omap_generic_map_io,
+	.init_early	= omap_generic_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-h4.c

@@ -290,14 +290,15 @@ static struct omap_board_config_kernel h4_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
-static void __init omap_h4_init_irq(void)
+static void __init omap_h4_init_early(void)
 {
-	omap_board_config = h4_config;
-	omap_board_config_size = ARRAY_SIZE(h4_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
+}
+
+static void __init omap_h4_init_irq(void)
+{
 	omap_init_irq();
-	h4_init_flash();
 }
 
 static struct at24_platform_data m24c01 = {
@@ -330,6 +331,9 @@ static void __init omap_h4_init(void)
 {
 	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
 
+	omap_board_config = h4_config;
+	omap_board_config_size = ARRAY_SIZE(h4_config);
+
 	/*
 	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on
@@ -367,6 +371,7 @@ static void __init omap_h4_init(void)
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
 	omap2_usbfs_init(&h4_usb_config);
 	omap_serial_init();
+	h4_init_flash();
 }
 
 static void __init omap_h4_map_io(void)
@@ -378,8 +383,9 @@ static void __init omap_h4_map_io(void)
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 	.boot_params	= 0x80000100,
-	.map_io		= omap_h4_map_io,
 	.reserve	= omap_reserve,
+	.map_io		= omap_h4_map_io,
+	.init_early	= omap_h4_init_early,
 	.init_irq	= omap_h4_init_irq,
 	.init_machine	= omap_h4_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-igep0020.c

@@ -250,7 +250,7 @@ static inline void __init igep2_init_smsc911x(void) { }
 #endif
 
 static struct regulator_consumer_supply igep2_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
 
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data igep2_vmmc1 = {
@@ -268,7 +268,7 @@ static struct regulator_init_data igep2_vmmc1 = {
 };
 
 static struct regulator_consumer_supply igep2_vio_supply =
-	REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
 
 static struct regulator_init_data igep2_vio = {
 	.constraints = {
@@ -286,7 +286,7 @@ static struct regulator_init_data igep2_vio = {
 };
 
 static struct regulator_consumer_supply igep2_vmmc2_supply =
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
 
 static struct regulator_init_data igep2_vmmc2 = {
 	.constraints		= {
@@ -485,18 +485,8 @@ static struct omap_dss_board_info igep2_dss_data = {
 	.default_device	= &igep2_dvi_device,
 };
 
-static struct platform_device igep2_dss_device = {
-	.name	= "omapdss",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &igep2_dss_data,
-	},
-};
-
-static struct regulator_consumer_supply igep2_vpll2_supply = {
-	.supply	= "vdds_dsi",
-	.dev	= &igep2_dss_device.dev,
-};
+static struct regulator_consumer_supply igep2_vpll2_supply =
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
 
 static struct regulator_init_data igep2_vpll2 = {
 	.constraints = {
@@ -521,21 +511,17 @@ static void __init igep2_display_init(void)
 }
 
 static struct platform_device *igep2_devices[] __initdata = {
-	&igep2_dss_device,
 	&igep2_vwlan_device,
 };
 
-static void __init igep2_init_irq(void)
+static void __init igep2_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(m65kxxxxam_sdrc_params,
 				  m65kxxxxam_sdrc_params);
-	omap_init_irq();
 }
 
-static struct twl4030_codec_audio_data igep2_audio_data = {
-	.audio_mclk = 26000000,
-};
+static struct twl4030_codec_audio_data igep2_audio_data;
 
 static struct twl4030_codec_data igep2_codec_data = {
 	.audio_mclk = 26000000,
@@ -697,6 +683,7 @@ static void __init igep2_init(void)
 	/* Register I2C busses and drivers */
 	igep2_i2c_init();
 	platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
+	omap_display_init(&igep2_dss_data);
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
@@ -716,9 +703,10 @@ static void __init igep2_init(void)
 
 MACHINE_START(IGEP0020, "IGEP v2 board")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= igep2_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= igep2_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= igep2_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-igep0030.c

@@ -142,7 +142,7 @@ static void __init igep3_flash_init(void) {}
 #endif
 
 static struct regulator_consumer_supply igep3_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
 
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data igep3_vmmc1 = {
@@ -160,7 +160,7 @@ static struct regulator_init_data igep3_vmmc1 = {
 };
 
 static struct regulator_consumer_supply igep3_vio_supply =
-	REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
 
 static struct regulator_init_data igep3_vio = {
 	.constraints = {
@@ -178,7 +178,7 @@ static struct regulator_init_data igep3_vio = {
 };
 
 static struct regulator_consumer_supply igep3_vmmc2_supply =
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
 
 static struct regulator_init_data igep3_vmmc2 = {
 	.constraints	= {
@@ -331,12 +331,11 @@ static struct platform_device *igep3_devices[] __initdata = {
 	&igep3_vwlan_device,
 };
 
-static void __init igep3_init_irq(void)
+static void __init igep3_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(m65kxxxxam_sdrc_params,
 				  m65kxxxxam_sdrc_params);
-	omap_init_irq();
 }
 
 static struct twl4030_platform_data igep3_twl4030_pdata = {
@@ -452,7 +451,8 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_irq	= igep3_init_irq,
+	.init_early	= igep3_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= igep3_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-ldp.c

@@ -288,13 +288,10 @@ static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&ldp_lcd_config },
 };
 
-static void __init omap_ldp_init_irq(void)
+static void __init omap_ldp_init_early(void)
 {
-	omap_board_config = ldp_config;
-	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 static struct twl4030_usb_data ldp_usb_data = {
@@ -330,6 +327,26 @@ static struct regulator_init_data ldp_vmmc1 = {
 	.consumer_supplies	= &ldp_vmmc1_supply,
 };
 
+/* ads7846 on SPI */
+static struct regulator_consumer_supply ldp_vaux1_supplies[] = {
+	REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
+
+/* VAUX1 */
+static struct regulator_init_data ldp_vaux1 = {
+	.constraints = {
+		.min_uV			= 3000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(ldp_vaux1_supplies),
+	.consumer_supplies		= ldp_vaux1_supplies,
+};
+
 static struct twl4030_platform_data ldp_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -338,6 +355,7 @@ static struct twl4030_platform_data ldp_twldata = {
 	.madc		= &ldp_madc_data,
 	.usb		= &ldp_usb_data,
 	.vmmc1		= &ldp_vmmc1,
+	.vaux1		= &ldp_vaux1,
 	.gpio		= &ldp_gpio_data,
 	.keypad		= &ldp_kp_twl4030_data,
 };
@@ -423,6 +441,8 @@ static struct mtd_partition ldp_nand_partitions[] = {
 static void __init omap_ldp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_board_config = ldp_config;
+	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	ldp_init_smsc911x();
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
@@ -434,7 +454,7 @@ static void __init omap_ldp_init(void)
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
 	board_nand_init(ldp_nand_partitions,
-		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS);
+		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
 
 	omap2_hsmmc_init(mmc);
 	/* link regulators to MMC adapters */
@@ -443,9 +463,10 @@ static void __init omap_ldp_init(void)
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_ldp_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap_ldp_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_ldp_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-n8x0.c

@@ -536,7 +536,7 @@ static void __init n8x0_mmc_init(void)
 	}
 
 	mmc_data[0] = &mmc1_data;
-	omap2_init_mmc(mmc_data, OMAP24XX_NR_MMC);
+	omap242x_init_mmc(mmc_data);
 }
 #else
 
@@ -628,11 +628,10 @@ static void __init n8x0_map_io(void)
 	omap242x_map_common_io();
 }
 
-static void __init n8x0_init_irq(void)
+static void __init n8x0_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 #ifdef CONFIG_OMAP_MUX
@@ -703,27 +702,30 @@ static void __init n8x0_init_machine(void)
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
 	.boot_params	= 0x80000100,
-	.map_io		= n8x0_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= n8x0_init_irq,
+	.map_io		= n8x0_map_io,
+	.init_early	= n8x0_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
 	.boot_params	= 0x80000100,
-	.map_io		= n8x0_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= n8x0_init_irq,
+	.map_io		= n8x0_map_io,
+	.init_early	= n8x0_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.boot_params	= 0x80000100,
-	.map_io		= n8x0_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= n8x0_init_irq,
+	.map_io		= n8x0_map_io,
+	.init_early	= n8x0_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3beagle.c

@@ -23,6 +23,7 @@
 #include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/opp.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -45,10 +46,12 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
+#include <plat/omap_device.h>
 
 #include "mux.h"
 #include "hsmmc.h"
 #include "timer-gp.h"
+#include "pm.h"
 
 #define NAND_BLOCK_SIZE		SZ_128K
 
@@ -228,14 +231,6 @@ static struct omap_dss_board_info beagle_dss_data = {
 	.default_device = &beagle_dvi_device,
 };
 
-static struct platform_device beagle_dss_device = {
-	.name          = "omapdss",
-	.id            = -1,
-	.dev            = {
-		.platform_data = &beagle_dss_data,
-	},
-};
-
 static struct regulator_consumer_supply beagle_vdac_supply =
 	REGULATOR_SUPPLY("vdda_dac", "omapdss");
 
@@ -435,9 +430,7 @@ static struct twl4030_usb_data beagle_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static struct twl4030_codec_audio_data beagle_audio_data = {
-	.audio_mclk = 26000000,
-};
+static struct twl4030_codec_audio_data beagle_audio_data;
 
 static struct twl4030_codec_data beagle_codec_data = {
 	.audio_mclk = 26000000,
@@ -536,11 +529,15 @@ static struct platform_device keys_gpio = {
 	},
 };
 
-static void __init omap3_beagle_init_irq(void)
+static void __init omap3_beagle_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
+}
+
+static void __init omap3_beagle_init_irq(void)
+{
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -550,7 +547,6 @@ static void __init omap3_beagle_init_irq(void)
 static struct platform_device *omap3_beagle_devices[] __initdata = {
 	&leds_gpio,
 	&keys_gpio,
-	&beagle_dss_device,
 };
 
 static void __init omap3beagle_flash_init(void)
@@ -610,6 +606,52 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
+static void __init beagle_opp_init(void)
+{
+	int r = 0;
+
+	/* Initialize the omap3 opp table */
+	if (omap3_opp_init()) {
+		pr_err("%s: opp default init failed\n", __func__);
+		return;
+	}
+
+	/* Custom OPP enabled for XM */
+	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+		struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
+		struct omap_hwmod *dh = omap_hwmod_lookup("iva");
+		struct device *dev;
+
+		if (!mh || !dh) {
+			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
+				__func__, mh, dh);
+			return;
+		}
+		/* Enable MPU 1GHz and lower opps */
+		dev = &mh->od->pdev.dev;
+		r = opp_enable(dev, 800000000);
+		/* TODO: MPU 1GHz needs SR and ABB */
+
+		/* Enable IVA 800MHz and lower opps */
+		dev = &dh->od->pdev.dev;
+		r |= opp_enable(dev, 660000000);
+		/* TODO: DSP 800MHz needs SR and ABB */
+		if (r) {
+			pr_err("%s: failed to enable higher opp %d\n",
+				__func__, r);
+			/*
+			 * Cleanup - disable the higher freqs - we dont care
+			 * about the results
+			 */
+			dev = &mh->od->pdev.dev;
+			opp_disable(dev, 800000000);
+			dev = &dh->od->pdev.dev;
+			opp_disable(dev, 660000000);
+		}
+	}
+	return;
+}
+
 static void __init omap3_beagle_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -617,6 +659,7 @@ static void __init omap3_beagle_init(void)
 	omap3_beagle_i2c_init();
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
+	omap_display_init(&beagle_dss_data);
 	omap_serial_init();
 
 	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
@@ -633,13 +676,15 @@ static void __init omap3_beagle_init(void)
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 
 	beagle_display_init();
+	beagle_opp_init();
 }
 
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3_beagle_init_early,
 	.init_irq	= omap3_beagle_init_irq,
 	.init_machine	= omap3_beagle_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-omap3logic.c

@@ -195,11 +195,10 @@ static inline void __init board_smsc911x_init(void)
 	gpmc_smsc911x_init(&board_smsc911x_data);
 }
 
-static void __init omap3logic_init_irq(void)
+static void __init omap3logic_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 #ifdef CONFIG_OMAP_MUX
@@ -225,7 +224,8 @@ static void __init omap3logic_init(void)
 MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
-	.init_irq	= omap3logic_init_irq,
+	.init_early	= omap3logic_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap_timer,
 MACHINE_END
@@ -233,7 +233,8 @@ MACHINE_END
 MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
-	.init_irq	= omap3logic_init_irq,
+	.init_early	= omap3logic_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3pandora.c

@@ -253,14 +253,6 @@ static struct omap_dss_board_info pandora_dss_data = {
 	.default_device	= &pandora_lcd_device,
 };
 
-static struct platform_device pandora_dss_device = {
-	.name		= "omapdss",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &pandora_dss_data,
-	},
-};
-
 static void pandora_wl1251_init_card(struct mmc_card *card)
 {
 	/*
@@ -341,13 +333,13 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
 };
 
 static struct regulator_consumer_supply pandora_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
 
 static struct regulator_consumer_supply pandora_vmmc2_supply =
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
 
 static struct regulator_consumer_supply pandora_vmmc3_supply =
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.2");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2");
 
 static struct regulator_consumer_supply pandora_vdda_dac_supply =
 	REGULATOR_SUPPLY("vdda_dac", "omapdss");
@@ -524,9 +516,7 @@ static struct twl4030_usb_data omap3pandora_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static struct twl4030_codec_audio_data omap3pandora_audio_data = {
-	.audio_mclk = 26000000,
-};
+static struct twl4030_codec_audio_data omap3pandora_audio_data;
 
 static struct twl4030_codec_data omap3pandora_codec_data = {
 	.audio_mclk = 26000000,
@@ -634,12 +624,11 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 	}
 };
 
-static void __init omap3pandora_init_irq(void)
+static void __init omap3pandora_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
 }
 
 static void __init pandora_wl1251_init(void)
@@ -677,7 +666,6 @@ static void __init pandora_wl1251_init(void)
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_leds_gpio,
 	&pandora_keys_gpio,
-	&pandora_dss_device,
 	&pandora_vwlan_device,
 };
 
@@ -712,6 +700,7 @@ static void __init omap3pandora_init(void)
 	pandora_wl1251_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));
+	omap_display_init(&pandora_dss_data);
 	omap_serial_init();
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
@@ -727,9 +716,10 @@ static void __init omap3pandora_init(void)
 
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap3pandora_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3pandora_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap3pandora_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3stalker.c

@@ -240,14 +240,6 @@ static struct omap_dss_board_info omap3_stalker_dss_data = {
 	.default_device	= &omap3_stalker_dvi_device,
 };
 
-static struct platform_device omap3_stalker_dss_device = {
-	.name	= "omapdss",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &omap3_stalker_dss_data,
-	},
-};
-
 static struct regulator_consumer_supply omap3stalker_vmmc1_supply = {
 	.supply		= "vmmc",
 };
@@ -439,19 +431,15 @@ static struct twl4030_madc_platform_data omap3stalker_madc_data = {
 	.irq_line	= 1,
 };
 
-static struct twl4030_codec_audio_data omap3stalker_audio_data = {
-	.audio_mclk	= 26000000,
-};
+static struct twl4030_codec_audio_data omap3stalker_audio_data;
 
 static struct twl4030_codec_data omap3stalker_codec_data = {
 	.audio_mclk	= 26000000,
 	.audio		= &omap3stalker_audio_data,
 };
 
-static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = {
-	.supply		= "vdda_dac",
-	.dev		= &omap3_stalker_dss_device.dev,
-};
+static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply =
+	REGULATOR_SUPPLY("vdda_dac", "omapdss");
 
 /* VDAC for DSS driving S-Video */
 static struct regulator_init_data omap3_stalker_vdac = {
@@ -469,10 +457,8 @@ static struct regulator_init_data omap3_stalker_vdac = {
 };
 
 /* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_stalker_vpll2_supply = {
-	.supply		= "vdds_dsi",
-	.dev		= &omap3_stalker_lcd_device.dev,
-};
+static struct regulator_consumer_supply omap3_stalker_vpll2_supply =
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
 
 static struct regulator_init_data omap3_stalker_vpll2 = {
 	.constraints		= {
@@ -591,12 +577,14 @@ static struct spi_board_info omap3stalker_spi_board_info[] = {
 static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
 };
 
-static void __init omap3_stalker_init_irq(void)
+static void __init omap3_stalker_init_early(void)
 {
-	omap_board_config = omap3_stalker_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
+}
+
+static void __init omap3_stalker_init_irq(void)
+{
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -604,7 +592,6 @@ static void __init omap3_stalker_init_irq(void)
 }
 
 static struct platform_device *omap3_stalker_devices[] __initdata = {
-	&omap3_stalker_dss_device,
 	&keys_gpio,
 };
 
@@ -638,12 +625,15 @@ static struct omap_musb_board_data musb_board_data = {
 static void __init omap3_stalker_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
+	omap_board_config = omap3_stalker_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
 
 	omap3_stalker_i2c_init();
 
 	platform_add_devices(omap3_stalker_devices,
 			     ARRAY_SIZE(omap3_stalker_devices));
 
+	omap_display_init(&omap3_stalker_dss_data);
 	spi_register_board_info(omap3stalker_spi_board_info,
 				ARRAY_SIZE(omap3stalker_spi_board_info));
 
@@ -666,6 +656,7 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
 	/* Maintainer: Jason Lam -lzg@ema-tech.com */
 	.boot_params		= 0x80000100,
 	.map_io			= omap3_map_io,
+	.init_early		= omap3_stalker_init_early,
 	.init_irq		= omap3_stalker_init_irq,
 	.init_machine		= omap3_stalker_init,
 	.timer			= &omap_timer,

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -252,9 +252,7 @@ static struct twl4030_usb_data touchbook_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static struct twl4030_codec_audio_data touchbook_audio_data = {
-	.audio_mclk = 26000000,
-};
+static struct twl4030_codec_audio_data touchbook_audio_data;
 
 static struct twl4030_codec_data touchbook_codec_data = {
 	.audio_mclk = 26000000,
@@ -415,14 +413,15 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
-static void __init omap3_touchbook_init_irq(void)
+static void __init omap3_touchbook_init_early(void)
 {
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_board_config = omap3_touchbook_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
+}
+
+static void __init omap3_touchbook_init_irq(void)
+{
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -510,6 +509,10 @@ static struct omap_musb_board_data musb_board_data = {
 
 static void __init omap3_touchbook_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_board_config = omap3_touchbook_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
+
 	pm_power_off = omap3_touchbook_poweroff;
 
 	omap3_touchbook_i2c_init();
@@ -538,8 +541,9 @@ static void __init omap3_touchbook_init(void)
 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3_touchbook_init_early,
 	.init_irq	= omap3_touchbook_init_irq,
 	.init_machine	= omap3_touchbook_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-omap4panda.c

@@ -26,6 +26,8 @@
 #include <linux/usb/otg.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/wl12xx.h>
 
 #include <mach/hardware.h>
 #include <mach/omap4-common.h>
@@ -45,6 +47,18 @@
 
 #define GPIO_HUB_POWER		1
 #define GPIO_HUB_NRESET		62
+#define GPIO_WIFI_PMENA		43
+#define GPIO_WIFI_IRQ		53
+
+/* wl127x BT, FM, GPS connectivity chip */
+static int wl1271_gpios[] = {46, -1, -1};
+static struct platform_device wl1271_device = {
+	.name	= "kim",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &wl1271_gpios,
+	},
+};
 
 static struct gpio_led gpio_leds[] = {
 	{
@@ -74,13 +88,13 @@ static struct platform_device leds_gpio = {
 
 static struct platform_device *panda_devices[] __initdata = {
 	&leds_gpio,
+	&wl1271_device,
 };
 
-static void __init omap4_panda_init_irq(void)
+static void __init omap4_panda_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	gic_init_irq();
 }
 
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
@@ -163,16 +177,62 @@ static struct omap2_hsmmc_info mmc[] = {
 		.gpio_wp	= -EINVAL,
 		.gpio_cd	= -EINVAL,
 	},
+	{
+		.name		= "wl1271",
+		.mmc		= 5,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+		.gpio_wp	= -EINVAL,
+		.gpio_cd	= -EINVAL,
+		.ocr_mask	= MMC_VDD_165_195,
+		.nonremovable	= true,
+	},
 	{}	/* Terminator */
 };
 
 static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.0",
+		.dev_name = "omap_hsmmc.0",
 	},
 };
 
+static struct regulator_consumer_supply omap4_panda_vmmc5_supply = {
+	.supply = "vmmc",
+	.dev_name = "omap_hsmmc.4",
+};
+
+static struct regulator_init_data panda_vmmc5 = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &omap4_panda_vmmc5_supply,
+};
+
+static struct fixed_voltage_config panda_vwlan = {
+	.supply_name = "vwl1271",
+	.microvolts = 1800000, /* 1.8V */
+	.gpio = GPIO_WIFI_PMENA,
+	.startup_delay = 70000, /* 70msec */
+	.enable_high = 1,
+	.enabled_at_boot = 0,
+	.init_data = &panda_vmmc5,
+};
+
+static struct platform_device omap_vwlan_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &panda_vwlan,
+	},
+};
+
+struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
+	.irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
+	/* PANDA ref clock is 38.4 MHz */
+	.board_ref_clock = 2,
+};
+
 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 {
 	int ret = 0;
@@ -306,7 +366,6 @@ static struct regulator_init_data omap4_panda_vana = {
 	.constraints = {
 		.min_uV			= 2100000,
 		.max_uV			= 2100000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
@@ -318,7 +377,6 @@ static struct regulator_init_data omap4_panda_vcxio = {
 	.constraints = {
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
@@ -330,7 +388,6 @@ static struct regulator_init_data omap4_panda_vdac = {
 	.constraints = {
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
@@ -392,10 +449,90 @@ static int __init omap4_panda_i2c_init(void)
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* WLAN IRQ - GPIO 53 */
+	OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	/* WLAN POWER ENABLE - GPIO 43 */
+	OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+	/* WLAN SDIO: MMC5 CMD */
+	OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC5 CLK */
+	OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC5 DAT[0-3] */
+	OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
+
+static struct omap_device_pad serial2_pads[] __initdata = {
+	OMAP_MUX_STATIC("uart2_cts.uart2_cts",
+			 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart2_rts.uart2_rts",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart2_rx.uart2_rx",
+			 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart2_tx.uart2_tx",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+static struct omap_device_pad serial3_pads[] __initdata = {
+	OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
+			 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
+			 OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+static struct omap_device_pad serial4_pads[] __initdata = {
+	OMAP_MUX_STATIC("uart4_rx.uart4_rx",
+			 OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart4_tx.uart4_tx",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+static struct omap_board_data serial2_data = {
+	.id             = 1,
+	.pads           = serial2_pads,
+	.pads_cnt       = ARRAY_SIZE(serial2_pads),
+};
+
+static struct omap_board_data serial3_data = {
+	.id             = 2,
+	.pads           = serial3_pads,
+	.pads_cnt       = ARRAY_SIZE(serial3_pads),
+};
+
+static struct omap_board_data serial4_data = {
+	.id             = 3,
+	.pads           = serial4_pads,
+	.pads_cnt       = ARRAY_SIZE(serial4_pads),
+};
+
+static inline void board_serial_init(void)
+{
+	struct omap_board_data bdata;
+	bdata.flags     = 0;
+	bdata.pads      = NULL;
+	bdata.pads_cnt  = 0;
+	bdata.id        = 0;
+	/* pass dummy data for UART1 */
+	omap_serial_init_port(&bdata);
+
+	omap_serial_init_port(&serial2_data);
+	omap_serial_init_port(&serial3_data);
+	omap_serial_init_port(&serial4_data);
+}
 #else
 #define board_mux	NULL
+
+static inline void board_serial_init(void)
+{
+	omap_serial_init();
+}
 #endif
 
 static void __init omap4_panda_init(void)
@@ -406,9 +543,13 @@ static void __init omap4_panda_init(void)
 		package = OMAP_PACKAGE_CBL;
 	omap4_mux_init(board_mux, package);
 
+	if (wl12xx_set_platform_data(&omap_panda_wlan_data))
+		pr_err("error setting wl12xx data\n");
+
 	omap4_panda_i2c_init();
 	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
-	omap_serial_init();
+	platform_device_register(&omap_vwlan_device);
+	board_serial_init();
 	omap4_twl6030_hsmmc_init(mmc);
 	omap4_ehci_init();
 	usb_musb_init(&musb_board_data);
@@ -425,7 +566,8 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap4_panda_map_io,
-	.init_irq	= omap4_panda_init_irq,
+	.init_early	= omap4_panda_init_early,
+	.init_irq	= gic_init_irq,
 	.init_machine	= omap4_panda_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-overo.c

@@ -358,9 +358,7 @@ static struct regulator_init_data overo_vmmc1 = {
 	.consumer_supplies	= &overo_vmmc1_supply,
 };
 
-static struct twl4030_codec_audio_data overo_audio_data = {
-	.audio_mclk = 26000000,
-};
+static struct twl4030_codec_audio_data overo_audio_data;
 
 static struct twl4030_codec_data overo_codec_data = {
 	.audio_mclk = 26000000,
@@ -409,14 +407,11 @@ static struct omap_board_config_kernel overo_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&overo_lcd_config },
 };
 
-static void __init overo_init_irq(void)
+static void __init overo_init_early(void)
 {
-	omap_board_config = overo_config;
-	omap_board_config_size = ARRAY_SIZE(overo_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
 }
 
 static struct platform_device *overo_devices[] __initdata = {
@@ -449,6 +444,8 @@ static struct omap_musb_board_data musb_board_data = {
 static void __init overo_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_board_config = overo_config;
+	omap_board_config_size = ARRAY_SIZE(overo_config);
 	overo_i2c_init();
 	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
 	omap_serial_init();
@@ -501,9 +498,10 @@ static void __init overo_init(void)
 
 MACHINE_START(OVERO, "Gumstix Overo")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= overo_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= overo_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= overo_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-rm680.c

@@ -33,7 +33,7 @@
 #include "sdram-nokia.h"
 
 static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
 };
 
 /* Fixed regulator for internal eMMC */
@@ -138,14 +138,13 @@ static void __init rm680_peripherals_init(void)
 	omap2_hsmmc_init(mmc);
 }
 
-static void __init rm680_init_irq(void)
+static void __init rm680_init_early(void)
 {
 	struct omap_sdrc_params *sdrc_params;
 
 	omap2_init_common_infrastructure();
 	sdrc_params = nokia_get_sdram_timings();
 	omap2_init_common_devices(sdrc_params, sdrc_params);
-	omap_init_irq();
 }
 
 #ifdef CONFIG_OMAP_MUX
@@ -176,9 +175,10 @@ static void __init rm680_map_io(void)
 
 MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
 	.boot_params	= 0x80000100,
-	.map_io		= rm680_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= rm680_init_irq,
+	.map_io		= rm680_map_io,
+	.init_early	= rm680_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= rm680_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -36,6 +36,8 @@
 
 #include <sound/tlv320aic3x.h>
 #include <sound/tpa6130a2-plat.h>
+#include <media/radio-si4713.h>
+#include <media/si4713.h>
 
 #include <../drivers/staging/iio/light/tsl2563.h>
 
@@ -47,6 +49,8 @@
 
 #define RX51_WL1251_POWER_GPIO		87
 #define RX51_WL1251_IRQ_GPIO		42
+#define RX51_FMTX_RESET_GPIO		163
+#define RX51_FMTX_IRQ			53
 
 /* list all spi devices here */
 enum {
@@ -331,13 +335,13 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 };
 
 static struct regulator_consumer_supply rx51_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
 
 static struct regulator_consumer_supply rx51_vaux3_supply =
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
 
 static struct regulator_consumer_supply rx51_vsim_supply =
-	REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
 
 static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
 	/* tlv320aic3x analog supplies */
@@ -348,7 +352,7 @@ static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
 	/* tpa6130a2 */
 	REGULATOR_SUPPLY("Vdd", "2-0060"),
 	/* Keep vmmc as last item. It is not iterated for newer boards */
-	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
 };
 
 static struct regulator_consumer_supply rx51_vio_supplies[] = {
@@ -357,10 +361,14 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = {
 	REGULATOR_SUPPLY("DVDD", "2-0018"),
 	REGULATOR_SUPPLY("IOVDD", "2-0019"),
 	REGULATOR_SUPPLY("DVDD", "2-0019"),
+	/* Si4713 IO supply */
+	REGULATOR_SUPPLY("vio", "2-0063"),
 };
 
 static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
 	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
+	/* Si4713 supply */
+	REGULATOR_SUPPLY("vdd", "2-0063"),
 };
 
 static struct regulator_consumer_supply rx51_vdac_supply[] = {
@@ -511,6 +519,41 @@ static struct regulator_init_data rx51_vio = {
 	.consumer_supplies	= rx51_vio_supplies,
 };
 
+static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
+	.gpio_reset	= RX51_FMTX_RESET_GPIO,
+};
+
+static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = {
+	I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH),
+	.platform_data	= &rx51_si4713_i2c_data,
+};
+
+static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = {
+	.i2c_bus	= 2,
+	.subdev_board_info = &rx51_si4713_board_info,
+};
+
+static struct platform_device rx51_si4713_dev __initdata_or_module = {
+	.name	= "radio-si4713",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &rx51_si4713_data,
+	},
+};
+
+static __init void rx51_init_si4713(void)
+{
+	int err;
+
+	err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
+	if (err) {
+		printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
+		return;
+	}
+	rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ);
+	platform_device_register(&rx51_si4713_dev);
+}
+
 static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 {
 	/* FIXME this gpio setup is just a placeholder for now */
@@ -699,6 +742,14 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = {
 	.resource_config = twl4030_rconfig,
 };
 
+struct twl4030_codec_vibra_data rx51_vibra_data __initdata = {
+	.coexist	= 0,
+};
+
+struct twl4030_codec_data rx51_codec_data __initdata = {
+	.audio_mclk	= 26000000,
+	.vibra		= &rx51_vibra_data,
+};
 
 static struct twl4030_platform_data rx51_twldata __initdata = {
 	.irq_base		= TWL4030_IRQ_BASE,
@@ -710,6 +761,7 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 	.madc			= &rx51_madc_data,
 	.usb			= &rx51_usb_data,
 	.power			= &rx51_t2scripts_data,
+	.codec			= &rx51_codec_data,
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,
@@ -921,6 +973,7 @@ void __init rx51_peripherals_init(void)
 	board_smc91x_init();
 	rx51_add_gpio_keys();
 	rx51_init_wl1251();
+	rx51_init_si4713();
 	spi_register_board_info(rx51_peripherals_spi_board_info,
 				ARRAY_SIZE(rx51_peripherals_spi_board_info));
 

arch/arm/mach-omap2/board-rx51-video.c

@@ -66,18 +66,6 @@ static struct omap_dss_board_info rx51_dss_board_info = {
 	.default_device	= &rx51_lcd_device,
 };
 
-struct platform_device rx51_display_device = {
-	.name	= "omapdss",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &rx51_dss_board_info,
-	},
-};
-
-static struct platform_device *rx51_video_devices[] __initdata = {
-	&rx51_display_device,
-};
-
 static int __init rx51_video_init(void)
 {
 	if (!machine_is_nokia_rx51())
@@ -95,8 +83,7 @@ static int __init rx51_video_init(void)
 
 	gpio_direction_output(RX51_LCD_RESET_GPIO, 1);
 
-	platform_add_devices(rx51_video_devices,
-				ARRAY_SIZE(rx51_video_devices));
+	omap_display_init(&rx51_dss_board_info);
 	return 0;
 }
 

arch/arm/mach-omap2/board-rx51.c

@@ -98,17 +98,13 @@ static struct omap_board_config_kernel rx51_config[] = {
 	{ OMAP_TAG_LCD,		&rx51_lcd_config },
 };
 
-static void __init rx51_init_irq(void)
+static void __init rx51_init_early(void)
 {
 	struct omap_sdrc_params *sdrc_params;
 
-	omap_board_config = rx51_config;
-	omap_board_config_size = ARRAY_SIZE(rx51_config);
-	omap3_pm_init_cpuidle(rx51_cpuidle_params);
 	omap2_init_common_infrastructure();
 	sdrc_params = nokia_get_sdram_timings();
 	omap2_init_common_devices(sdrc_params, sdrc_params);
-	omap_init_irq();
 }
 
 extern void __init rx51_peripherals_init(void);
@@ -128,6 +124,9 @@ static struct omap_musb_board_data musb_board_data = {
 static void __init rx51_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_board_config = rx51_config;
+	omap_board_config_size = ARRAY_SIZE(rx51_config);
+	omap3_pm_init_cpuidle(rx51_cpuidle_params);
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
 	rx51_peripherals_init();
@@ -149,9 +148,10 @@ static void __init rx51_map_io(void)
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
 	.boot_params	= 0x80000100,
-	.map_io		= rx51_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= rx51_init_irq,
+	.map_io		= rx51_map_io,
+	.init_early	= rx51_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= rx51_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-ti8168evm.c

+/*
+ * Code for TI8168 EVM.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/irqs.h>
+#include <plat/board.h>
+#include <plat/common.h>
+
+static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
+};
+
+static void __init ti8168_init_early(void)
+{
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
+}
+
+static void __init ti8168_evm_init_irq(void)
+{
+	omap_init_irq();
+}
+
+static void __init ti8168_evm_init(void)
+{
+	omap_serial_init();
+	omap_board_config = ti8168_evm_config;
+	omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
+}
+
+static void __init ti8168_evm_map_io(void)
+{
+	omap2_set_globals_ti816x();
+	omapti816x_map_common_io();
+}
+
+MACHINE_START(TI8168EVM, "ti8168evm")
+	/* Maintainer: Texas Instruments */
+	.boot_params	= 0x80000100,
+	.map_io		= ti8168_evm_map_io,
+	.init_early	= ti8168_init_early,
+	.init_irq	= ti8168_evm_init_irq,
+	.timer		= &omap_timer,
+	.init_machine	= ti8168_evm_init,
+MACHINE_END

arch/arm/mach-omap2/board-zoom-display.c

@@ -130,14 +130,6 @@ static struct omap_dss_board_info zoom_dss_data = {
 	.default_device		= &zoom_lcd_device,
 };
 
-static struct platform_device zoom_dss_device = {
-	.name				= "omapdss",
-	.id				= -1,
-	.dev				= {
-		.platform_data		= &zoom_dss_data,
-	},
-};
-
 static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
 	.turbo_mode		= 1,
 	.single_channel	= 1,  /* 0: slave, 1: master */
@@ -153,14 +145,9 @@ static struct spi_board_info nec_8048_spi_board_info[] __initdata = {
 	},
 };
 
-static struct platform_device *zoom_display_devices[] __initdata = {
-	&zoom_dss_device,
-};
-
 void __init zoom_display_init(void)
 {
-	platform_add_devices(zoom_display_devices,
-				ARRAY_SIZE(zoom_display_devices));
+	omap_display_init(&zoom_dss_data);
 	spi_register_board_info(nec_8048_spi_board_info,
 				ARRAY_SIZE(nec_8048_spi_board_info));
 	zoom_lcd_panel_init();

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -118,7 +118,7 @@ static struct regulator_consumer_supply zoom_vmmc2_supply = {
 
 static struct regulator_consumer_supply zoom_vmmc3_supply = {
 	.supply		= "vmmc",
-	.dev_name	= "mmci-omap-hs.2",
+	.dev_name	= "omap_hsmmc.2",
 };
 
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
@@ -322,9 +322,7 @@ static struct twl4030_madc_platform_data zoom_madc_data = {
 	.irq_line	= 1,
 };
 
-static struct twl4030_codec_audio_data zoom_audio_data = {
-	.audio_mclk = 26000000,
-};
+static struct twl4030_codec_audio_data zoom_audio_data;
 
 static struct twl4030_codec_data zoom_codec_data = {
 	.audio_mclk = 26000000,

arch/arm/mach-omap2/board-zoom.c

@@ -16,6 +16,7 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -33,7 +34,7 @@
 
 #define ZOOM3_EHCI_RESET_GPIO		64
 
-static void __init omap_zoom_init_irq(void)
+static void __init omap_zoom_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	if (machine_is_omap_zoom2())
@@ -42,14 +43,12 @@ static void __init omap_zoom_init_irq(void)
 	else if (machine_is_omap_zoom3())
 		omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
 					  h8mbx00u0mer0em_sdrc_params);
-
-	omap_init_irq();
 }
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* WLAN IRQ - GPIO 162 */
-	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 	/* WLAN POWER ENABLE - GPIO 101 */
 	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 	/* WLAN SDIO: MMC3 CMD */
@@ -126,8 +125,8 @@ static void __init omap_zoom_init(void)
 		usbhs_init(&usbhs_bdata);
 	}
 
-	board_nand_init(zoom_nand_partitions,
-			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
+	board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
+						ZOOM_NAND_CS, NAND_BUSWIDTH_16);
 	zoom_debugboard_init();
 	zoom_peripherals_init();
 	zoom_display_init();
@@ -135,18 +134,20 @@ static void __init omap_zoom_init(void)
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_zoom_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap_zoom_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap_timer,
 MACHINE_END
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_zoom_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap_zoom_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/clkt2xxx_apll.c

@@ -78,6 +78,26 @@ static int omap2_clk_apll54_enable(struct clk *clk)
 	return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK);
 }
 
+static void _apll96_allow_idle(struct clk *clk)
+{
+	omap2xxx_cm_set_apll96_auto_low_power_stop();
+}
+
+static void _apll96_deny_idle(struct clk *clk)
+{
+	omap2xxx_cm_set_apll96_disable_autoidle();
+}
+
+static void _apll54_allow_idle(struct clk *clk)
+{
+	omap2xxx_cm_set_apll54_auto_low_power_stop();
+}
+
+static void _apll54_deny_idle(struct clk *clk)
+{
+	omap2xxx_cm_set_apll54_disable_autoidle();
+}
+
 /* Stop APLL */
 static void omap2_clk_apll_disable(struct clk *clk)
 {
@@ -93,11 +113,15 @@ static void omap2_clk_apll_disable(struct clk *clk)
 const struct clkops clkops_apll96 = {
 	.enable		= omap2_clk_apll96_enable,
 	.disable	= omap2_clk_apll_disable,
+	.allow_idle	= _apll96_allow_idle,
+	.deny_idle	= _apll96_deny_idle,
 };
 
 const struct clkops clkops_apll54 = {
 	.enable		= omap2_clk_apll54_enable,
 	.disable	= omap2_clk_apll_disable,
+	.allow_idle	= _apll54_allow_idle,
+	.deny_idle	= _apll54_deny_idle,
 };
 
 /* Public functions */

arch/arm/mach-omap2/clkt2xxx_dpll.c

+/*
+ * OMAP2-specific DPLL control functions
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+
+/* Private functions */
+
+/**
+ * _allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control.  The DPLL will enter low-power
+ * stop when its downstream clocks are gated.  No return value.
+ * REVISIT: DPLL can optionally enter low-power bypass by writing 0x1
+ * instead.  Add some mechanism to optionally enter this mode.
+ */
+static void _allow_idle(struct clk *clk)
+{
+	if (!clk || !clk->dpll_data)
+		return;
+
+	omap2xxx_cm_set_dpll_auto_low_power_stop();
+}
+
+/**
+ * _deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control.  No return value.
+ */
+static void _deny_idle(struct clk *clk)
+{
+	if (!clk || !clk->dpll_data)
+		return;
+
+	omap2xxx_cm_set_dpll_disable_autoidle();
+}
+
+
+/* Public data */
+
+const struct clkops clkops_omap2xxx_dpll_ops = {
+	.allow_idle	= _allow_idle,
+	.deny_idle	= _deny_idle,
+};
+

arch/arm/mach-omap2/clkt2xxx_osc.c

@@ -30,6 +30,13 @@
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 
+/*
+ * XXX This does not actually enable the osc_ck, since the osc_ck must
+ * be running for this function to be called.  Instead, this function
+ * is used to disable an autoidle mode on the osc_ck.  The existing
+ * clk_enable/clk_disable()-based usecounting for osc_ck should be
+ * replaced with autoidle-based usecounting.
+ */
 static int omap2_enable_osc_ck(struct clk *clk)
 {
 	u32 pcc;
@@ -41,6 +48,13 @@ static int omap2_enable_osc_ck(struct clk *clk)
 	return 0;
 }
 
+/*
+ * XXX This does not actually disable the osc_ck, since doing so would
+ * immediately halt the system.  Instead, this function is used to
+ * enable an autoidle mode on the osc_ck.  The existing
+ * clk_enable/clk_disable()-based usecounting for osc_ck should be
+ * replaced with autoidle-based usecounting.
+ */
 static void omap2_disable_osc_ck(struct clk *clk)
 {
 	u32 pcc;

arch/arm/mach-omap2/clkt_clksel.c

@@ -97,7 +97,7 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
 				u32 *field_val)
 {
 	const struct clksel *clks;
-	const struct clksel_rate *clkr, *max_clkr;
+	const struct clksel_rate *clkr, *max_clkr = NULL;
 	u8 max_div = 0;
 
 	clks = _get_clksel_by_parent(clk, src_clk);

arch/arm/mach-omap2/clkt_dpll.c

@@ -178,12 +178,11 @@ void omap2_init_dpll_parent(struct clk *clk)
 	if (!dd)
 		return;
 
-	/* Return bypass rate if DPLL is bypassed */
 	v = __raw_readl(dd->control_reg);
 	v &= dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 
-	/* Reparent in case the dpll is in bypass */
+	/* Reparent the struct clk in case the dpll is in bypass */
 	if (cpu_is_omap24xx()) {
 		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
@@ -259,51 +258,23 @@ u32 omap2_get_dpll_rate(struct clk *clk)
 
 /* DPLL rate rounding code */
 
-/**
- * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
- * @clk: struct clk * of the DPLL
- * @tolerance: maximum rate error tolerance
- *
- * Set the maximum DPLL rate error tolerance for the rate rounding
- * algorithm.  The rate tolerance is an attempt to balance DPLL power
- * saving (the least divider value "n") vs. rate fidelity (the least
- * difference between the desired DPLL target rate and the rounded
- * rate out of the algorithm).  So, increasing the tolerance is likely
- * to decrease DPLL power consumption and increase DPLL rate error.
- * Returns -EINVAL if provided a null clock ptr or a clk that is not a
- * DPLL; or 0 upon success.
- */
-int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
-{
-	if (!clk || !clk->dpll_data)
-		return -EINVAL;
-
-	clk->dpll_data->rate_tolerance = tolerance;
-
-	return 0;
-}
-
 /**
  * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
  * @clk: struct clk * for a DPLL
  * @target_rate: desired DPLL clock rate
  *
- * Given a DPLL, a desired target rate, and a rate tolerance, round
- * the target rate to a possible, programmable rate for this DPLL.
- * Rate tolerance is assumed to be set by the caller before this
- * function is called.  Attempts to select the minimum possible n
- * within the tolerance to reduce power consumption.  Stores the
- * computed (m, n) in the DPLL's dpll_data structure so set_rate()
- * will not need to call this (expensive) function again.  Returns ~0
- * if the target rate cannot be rounded, either because the rate is
- * too low or because the rate tolerance is set too tightly; or the
- * rounded rate upon success.
+ * Given a DPLL and a desired target rate, round the target rate to a
+ * possible, programmable rate for this DPLL.  Attempts to select the
+ * minimum possible n.  Stores the computed (m, n) in the DPLL's
+ * dpll_data structure so set_rate() will not need to call this
+ * (expensive) function again.  Returns ~0 if the target rate cannot
+ * be rounded, or the rounded rate upon success.
  */
 long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 {
-	int m, n, r, e, scaled_max_m;
-	unsigned long scaled_rt_rp, new_rate;
-	int min_e = -1, min_e_m = -1, min_e_n = -1;
+	int m, n, r, scaled_max_m;
+	unsigned long scaled_rt_rp;
+	unsigned long new_rate = 0;
 	struct dpll_data *dd;
 
 	if (!clk || !clk->dpll_data)
@@ -311,8 +282,8 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 
 	dd = clk->dpll_data;
 
-	pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
-		 "%ld\n", clk->name, target_rate);
+	pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
+		 clk->name, target_rate);
 
 	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
 	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
@@ -347,39 +318,23 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 		if (r == DPLL_MULT_UNDERFLOW)
 			continue;
 
-		e = target_rate - new_rate;
-		pr_debug("clock: n = %d: m = %d: rate error is %d "
-			 "(new_rate = %ld)\n", n, m, e, new_rate);
-
-		if (min_e == -1 ||
-		    min_e >= (int)(abs(e) - dd->rate_tolerance)) {
-			min_e = e;
-			min_e_m = m;
-			min_e_n = n;
+		pr_debug("clock: %s: m = %d: n = %d: new_rate = %ld\n",
+			 clk->name, m, n, new_rate);
 
-			pr_debug("clock: found new least error %d\n", min_e);
-
-			/* We found good settings -- bail out now */
-			if (min_e <= dd->rate_tolerance)
+		if (target_rate == new_rate) {
+			dd->last_rounded_m = m;
+			dd->last_rounded_n = n;
+			dd->last_rounded_rate = target_rate;
 			break;
 		}
 	}
 
-	if (min_e < 0) {
-		pr_debug("clock: error: target rate or tolerance too low\n");
+	if (target_rate != new_rate) {
+		pr_debug("clock: %s: cannot round to rate %ld\n", clk->name,
+			 target_rate);
 		return ~0;
 	}
 
-	dd->last_rounded_m = min_e_m;
-	dd->last_rounded_n = min_e_n;
-	dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
-						       min_e_m,  min_e_n);
-
-	pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
-		 min_e, min_e_m, min_e_n);
-	pr_debug("clock: final rate: %ld  (target rate: %ld)\n",
-		 dd->last_rounded_rate, target_rate);
-
-	return dd->last_rounded_rate;
+	return target_rate;
 }
 

arch/arm/mach-omap2/clkt_iclk.c

+/*
+ * OMAP2/3 interface clock control
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/prcm.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+
+/* Private functions */
+
+/* XXX */
+void omap2_clkt_iclk_allow_idle(struct clk *clk)
+{
+	u32 v, r;
+
+	r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+	v = __raw_readl((__force void __iomem *)r);
+	v |= (1 << clk->enable_bit);
+	__raw_writel(v, (__force void __iomem *)r);
+}
+
+/* XXX */
+void omap2_clkt_iclk_deny_idle(struct clk *clk)
+{
+	u32 v, r;
+
+	r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+	v = __raw_readl((__force void __iomem *)r);
+	v &= ~(1 << clk->enable_bit);
+	__raw_writel(v, (__force void __iomem *)r);
+}
+
+/* Public data */
+
+const struct clkops clkops_omap2_iclk_dflt_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_companion	= omap2_clk_dflt_find_companion,
+	.find_idlest	= omap2_clk_dflt_find_idlest,
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
+};
+
+const struct clkops clkops_omap2_iclk_dflt = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
+};
+
+const struct clkops clkops_omap2_iclk_idle_only = {
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
+};
+
+const struct clkops clkops_omap2_mdmclk_dflt_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_companion	= omap2_clk_dflt_find_companion,
+	.find_idlest	= omap2_clk_dflt_find_idlest,
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
+};
+

arch/arm/mach-omap2/clock.c

@@ -22,7 +22,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
+#include <trace/events/power.h>
 
+#include <asm/cpu.h>
 #include <plat/clock.h>
 #include "clockdomain.h"
 #include <plat/cpu.h>
@@ -261,10 +263,13 @@ void omap2_clk_disable(struct clk *clk)
 
 	pr_debug("clock: %s: disabling in hardware\n", clk->name);
 
+	if (clk->ops && clk->ops->disable) {
+		trace_clock_disable(clk->name, 0, smp_processor_id());
 		clk->ops->disable(clk);
+	}
 
 	if (clk->clkdm)
-		omap2_clkdm_clk_disable(clk->clkdm, clk);
+		clkdm_clk_disable(clk->clkdm, clk);
 
 	if (clk->parent)
 		omap2_clk_disable(clk->parent);
@@ -304,7 +309,7 @@ int omap2_clk_enable(struct clk *clk)
 	}
 
 	if (clk->clkdm) {
-		ret = omap2_clkdm_clk_enable(clk->clkdm, clk);
+		ret = clkdm_clk_enable(clk->clkdm, clk);
 		if (ret) {
 			WARN(1, "clock: %s: could not enable clockdomain %s: "
 			     "%d\n", clk->name, clk->clkdm->name, ret);
@@ -312,17 +317,21 @@ int omap2_clk_enable(struct clk *clk)
 		}
 	}
 
+	if (clk->ops && clk->ops->enable) {
+		trace_clock_enable(clk->name, 1, smp_processor_id());
 		ret = clk->ops->enable(clk);
 		if (ret) {
-		WARN(1, "clock: %s: could not enable: %d\n", clk->name, ret);
+			WARN(1, "clock: %s: could not enable: %d\n",
+			     clk->name, ret);
 			goto oce_err3;
 		}
+	}
 
 	return 0;
 
 oce_err3:
 	if (clk->clkdm)
-		omap2_clkdm_clk_disable(clk->clkdm, clk);
+		clkdm_clk_disable(clk->clkdm, clk);
 oce_err2:
 	if (clk->parent)
 		omap2_clk_disable(clk->parent);
@@ -349,8 +358,10 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 	pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
 
 	/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
-	if (clk->set_rate)
+	if (clk->set_rate) {
+		trace_clock_set_rate(clk->name, rate, smp_processor_id());
 		ret = clk->set_rate(clk, rate);
+	}
 
 	return ret;
 }
@@ -373,10 +384,16 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 const struct clkops clkops_omap3_noncore_dpll_ops = {
 	.enable		= omap3_noncore_dpll_enable,
 	.disable	= omap3_noncore_dpll_disable,
+	.allow_idle	= omap3_dpll_allow_idle,
+	.deny_idle	= omap3_dpll_deny_idle,
 };
 
-#endif
+const struct clkops clkops_omap3_core_dpll_ops = {
+	.allow_idle	= omap3_dpll_allow_idle,
+	.deny_idle	= omap3_dpll_deny_idle,
+};
 
+#endif
 
 /*
  * OMAP2+ clock reset and init functions

arch/arm/mach-omap2/clock.h

@@ -2,7 +2,7 @@
  *  linux/arch/arm/mach-omap2/clock.h
  *
  *  Copyright (C) 2005-2009 Texas Instruments, Inc.
- *  Copyright (C) 2004-2009 Nokia Corporation
+ *  Copyright (C) 2004-2011 Nokia Corporation
  *
  *  Contacts:
  *  Richard Woodruff <r-woodruff2@ti.com>
@@ -18,9 +18,6 @@
 
 #include <plat/clock.h>
 
-/* The maximum error between a target DPLL rate and the rounded rate in Hz */
-#define DEFAULT_DPLL_RATE_TOLERANCE	50000
-
 /* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
 #define CORE_CLK_SRC_32K		0x0
 #define CORE_CLK_SRC_DPLL		0x1
@@ -55,7 +52,6 @@ void omap2_clk_disable(struct clk *clk);
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
-int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance);
 long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
 unsigned long omap3_dpll_recalc(struct clk *clk);
 unsigned long omap3_clkoutx2_recalc(struct clk *clk);
@@ -65,6 +61,9 @@ u32 omap3_dpll_autoidle_read(struct clk *clk);
 int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
 int omap3_noncore_dpll_enable(struct clk *clk);
 void omap3_noncore_dpll_disable(struct clk *clk);
+int omap4_dpllmx_gatectrl_read(struct clk *clk);
+void omap4_dpllmx_allow_gatectrl(struct clk *clk);
+void omap4_dpllmx_deny_gatectrl(struct clk *clk);
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 void omap2_clk_disable_unused(struct clk *clk);
@@ -83,6 +82,10 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
 int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent);
 
+/* clkt_iclk.c public functions */
+extern void omap2_clkt_iclk_allow_idle(struct clk *clk);
+extern void omap2_clkt_iclk_deny_idle(struct clk *clk);
+
 u32 omap2_get_dpll_rate(struct clk *clk);
 void omap2_init_dpll_parent(struct clk *clk);
 
@@ -136,6 +139,7 @@ extern struct clk *vclk, *sclk;
 extern const struct clksel_rate gpt_32k_rates[];
 extern const struct clksel_rate gpt_sys_rates[];
 extern const struct clksel_rate gfx_l3_rates[];
+extern const struct clksel_rate dsp_ick_rates[];
 
 #if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
 extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
@@ -145,6 +149,13 @@ extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
 #define omap2_clk_exit_cpufreq_table	0
 #endif
 
+extern const struct clkops clkops_omap2_iclk_dflt_wait;
+extern const struct clkops clkops_omap2_iclk_dflt;
+extern const struct clkops clkops_omap2_iclk_idle_only;
+extern const struct clkops clkops_omap2_mdmclk_dflt_wait;
+extern const struct clkops clkops_omap2xxx_dpll_ops;
 extern const struct clkops clkops_omap3_noncore_dpll_ops;
+extern const struct clkops clkops_omap3_core_dpll_ops;
+extern const struct clkops clkops_omap4_dpllmx_ops;
 
 #endif

arch/arm/mach-omap2/clock2xxx.h

@@ -20,16 +20,16 @@ u32 omap2xxx_get_apll_clkin(void);
 u32 omap2xxx_get_sysclkdiv(void);
 void omap2xxx_clk_prepare_for_reboot(void);
 
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
 int omap2420_clk_init(void);
 #else
-#define omap2420_clk_init()	0
+#define omap2420_clk_init()	do { } while(0)
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 int omap2430_clk_init(void);
 #else
-#define omap2430_clk_init()	0
+#define omap2430_clk_init()	do { } while(0)
 #endif
 
 extern void __iomem *prcm_clksrc_ctrl, *cm_idlest_pll;

arch/arm/mach-omap2/clock34xx.c

@@ -2,7 +2,7 @@
  * OMAP3-specific clock framework functions
  *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
+ * Copyright (C) 2007-2011 Nokia Corporation
  *
  * Paul Walmsley
  * Jouni Högander
@@ -59,6 +59,15 @@ const struct clkops clkops_omap3430es2_ssi_wait = {
 	.find_companion = omap2_clk_dflt_find_companion,
 };
 
+const struct clkops clkops_omap3430es2_iclk_ssi_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
+};
+
 /**
  * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
  * @clk: struct clk * being enabled
@@ -94,6 +103,15 @@ const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
 	.find_companion = omap2_clk_dflt_find_companion,
 };
 
+const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
+};
+
 /**
  * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
  * @clk: struct clk * being enabled
@@ -124,3 +142,12 @@ const struct clkops clkops_omap3430es2_hsotgusb_wait = {
 	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
 	.find_companion = omap2_clk_dflt_find_companion,
 };
+
+const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
+};

arch/arm/mach-omap2/clock34xx.h

@@ -2,14 +2,17 @@
  * OMAP34xx clock function prototypes and macros
  *
  * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
+ * Copyright (C) 2007-2011 Nokia Corporation
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 
 extern const struct clkops clkops_omap3430es2_ssi_wait;
+extern const struct clkops clkops_omap3430es2_iclk_ssi_wait;
 extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
+extern const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait;
 extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
+extern const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait;
 
 #endif

arch/arm/mach-omap2/clock3517.c

@@ -2,7 +2,7 @@
  * OMAP3517/3505-specific clock framework functions
  *
  * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2011 Nokia Corporation
  *
  * Ranjith Lohithakshan
  * Paul Walmsley
@@ -119,6 +119,8 @@ const struct clkops clkops_am35xx_ipss_wait = {
 	.disable	= omap2_dflt_clk_disable,
 	.find_idlest	= am35xx_clk_ipss_find_idlest,
 	.find_companion	= omap2_clk_dflt_find_companion,
+	.allow_idle	= omap2_clkt_iclk_allow_idle,
+	.deny_idle	= omap2_clkt_iclk_deny_idle,
 };
 
 

arch/arm/mach-omap2/clock3xxx.c

@@ -65,9 +65,6 @@ void __init omap3_clk_lock_dpll5(void)
 	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
 	clk_enable(dpll5_clk);
 
-	/* Enable autoidle to allow it to enter low power bypass */
-	omap3_dpll_allow_idle(dpll5_clk);
-
 	/* Program dpll5_m2_clk divider for no division */
 	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
 	clk_enable(dpll5_m2_clk);

arch/arm/mach-omap2/clock_common_data.c

@@ -37,3 +37,9 @@ const struct clksel_rate gfx_l3_rates[] = {
 	{ .div = 0 }
 };
 
+const struct clksel_rate dsp_ick_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_243X },
+	{ .div = 0 },
+};

arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c

@@ -89,6 +89,8 @@ static struct clkdm_dep gfx_sgx_wkdeps[] = {
 
 /* 24XX-specific possible dependencies */
 
+#ifdef CONFIG_ARCH_OMAP2
+
 /* Wakeup dependency source arrays */
 
 /* 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP */
@@ -168,10 +170,11 @@ static struct clkdm_dep core_24xx_wkdeps[] = {
 	{ NULL },
 };
 
+#endif /* CONFIG_ARCH_OMAP2 */
 
 /* 2430-specific possible wakeup dependencies */
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 
 /* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
 static struct clkdm_dep mdm_2430_wkdeps[] = {
@@ -194,7 +197,7 @@ static struct clkdm_dep mdm_2430_wkdeps[] = {
 	{ NULL },
 };
 
-#endif /* CONFIG_ARCH_OMAP2430 */
+#endif /* CONFIG_SOC_OMAP2430 */
 
 
 /* OMAP3-specific possible dependencies */
@@ -450,7 +453,7 @@ static struct clockdomain cm_clkdm = {
  * 2420-only clockdomains
  */
 
-#if defined(CONFIG_ARCH_OMAP2420)
+#if defined(CONFIG_SOC_OMAP2420)
 
 static struct clockdomain mpu_2420_clkdm = {
 	.name		= "mpu_clkdm",
@@ -514,14 +517,14 @@ static struct clockdomain dss_2420_clkdm = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
 };
 
-#endif   /* CONFIG_ARCH_OMAP2420 */
+#endif   /* CONFIG_SOC_OMAP2420 */
 
 
 /*
  * 2430-only clockdomains
  */
 
-#if defined(CONFIG_ARCH_OMAP2430)
+#if defined(CONFIG_SOC_OMAP2430)
 
 static struct clockdomain mpu_2430_clkdm = {
 	.name		= "mpu_clkdm",
@@ -600,7 +603,7 @@ static struct clockdomain dss_2430_clkdm = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-#endif    /* CONFIG_ARCH_OMAP2430 */
+#endif    /* CONFIG_SOC_OMAP2430 */
 
 
 /*
@@ -811,7 +814,7 @@ static struct clockdomain *clockdomains_omap2[] __initdata = {
 	&cm_clkdm,
 	&prm_clkdm,
 
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
 	&mpu_2420_clkdm,
 	&iva1_2420_clkdm,
 	&dsp_2420_clkdm,
@@ -821,7 +824,7 @@ static struct clockdomain *clockdomains_omap2[] __initdata = {
 	&dss_2420_clkdm,
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 	&mpu_2430_clkdm,
 	&mdm_clkdm,
 	&dsp_2430_clkdm,
@@ -854,7 +857,12 @@ static struct clockdomain *clockdomains_omap2[] __initdata = {
 	NULL,
 };
 
-void __init omap2_clockdomains_init(void)
+void __init omap2xxx_clockdomains_init(void)
+{
+	clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap2_clkdm_operations);
+}
+
+void __init omap3xxx_clockdomains_init(void)
 {
-	clkdm_init(clockdomains_omap2, clkdm_autodeps);
+	clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap3_clkdm_operations);
 }