Commit 0e77e35b authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: addi_eeprom: remove extra whitespace and comment cruft

Remove the extra whitespace and the comment cruft in this file.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 76e44f8e
...@@ -77,15 +77,11 @@ struct str_DigitalInputHeader { ...@@ -77,15 +77,11 @@ struct str_DigitalInputHeader {
}; };
struct str_DigitalOutputHeader { struct str_DigitalOutputHeader {
unsigned short w_Nchannel; unsigned short w_Nchannel;
}; };
/* used for timer as well as watchdog */ /* used for timer as well as watchdog */
struct str_TimerDetails { struct str_TimerDetails {
unsigned short w_HeaderSize; unsigned short w_HeaderSize;
unsigned char b_Resolution; unsigned char b_Resolution;
unsigned char b_Mode; /* in case of Watchdog it is functionality */ unsigned char b_Mode; /* in case of Watchdog it is functionality */
...@@ -94,13 +90,10 @@ struct str_TimerDetails { ...@@ -94,13 +90,10 @@ struct str_TimerDetails {
}; };
struct str_TimerMainHeader { struct str_TimerMainHeader {
unsigned short w_Ntimer; unsigned short w_Ntimer;
struct str_TimerDetails s_TimerDetails[4]; /* supports 4 timers */ struct str_TimerDetails s_TimerDetails[4]; /* supports 4 timers */
}; };
struct str_AnalogOutputHeader { struct str_AnalogOutputHeader {
unsigned short w_Nchannel; unsigned short w_Nchannel;
unsigned char b_Resolution; unsigned char b_Resolution;
...@@ -114,11 +107,6 @@ struct str_AnalogInputHeader { ...@@ -114,11 +107,6 @@ struct str_AnalogInputHeader {
unsigned char b_Resolution; unsigned char b_Resolution;
}; };
/*****************************************/
/* Read Header Functions */
/*****************************************/
int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress, int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
char *pc_PCIChipInformation, struct comedi_device *dev); char *pc_PCIChipInformation, struct comedi_device *dev);
...@@ -142,9 +130,6 @@ int i_EepromReadAnlogInputHeader(unsigned short w_PCIBoardEepromAddress, ...@@ -142,9 +130,6 @@ int i_EepromReadAnlogInputHeader(unsigned short w_PCIBoardEepromAddress,
char *pc_PCIChipInformation, unsigned short w_Address, char *pc_PCIChipInformation, unsigned short w_Address,
struct str_AnalogInputHeader *s_Header); struct str_AnalogInputHeader *s_Header);
/******************************************/
/* Eeprom Specific Functions */
/******************************************/
unsigned short w_EepromReadWord(unsigned short w_PCIBoardEepromAddress, char *pc_PCIChipInformation, unsigned short w_EepromReadWord(unsigned short w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
unsigned short w_EepromStartAddress); unsigned short w_EepromStartAddress);
void v_EepromWaitBusy(unsigned short w_PCIBoardEepromAddress); void v_EepromWaitBusy(unsigned short w_PCIBoardEepromAddress);
...@@ -154,654 +139,212 @@ void v_EepromSendCommand76(unsigned int dw_Address, unsigned int dw_EepromComman ...@@ -154,654 +139,212 @@ void v_EepromSendCommand76(unsigned int dw_Address, unsigned int dw_EepromComman
unsigned char b_DataLengthInBits); unsigned char b_DataLengthInBits);
void v_EepromCs76Read(unsigned int dw_Address, unsigned short w_offset, unsigned short *pw_Value); void v_EepromCs76Read(unsigned int dw_Address, unsigned short w_offset, unsigned short *pw_Value);
/*
+----------------------------------------------------------------------------+
| Function Name : unsigned short w_EepromReadWord |
| (unsigned short w_PCIBoardEepromAddress, |
| char * pc_PCIChipInformation, |
| unsigned short w_EepromStartAddress) |
+----------------------------------------------------------------------------+
| Task : Read from eepromn a word |
+----------------------------------------------------------------------------+
| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
| |
| char *pc_PCIChipInformation : PCI Chip Type. |
| |
| unsigned short w_EepromStartAddress : Selected eeprom address |
+----------------------------------------------------------------------------+
| Output Parameters : - |
+----------------------------------------------------------------------------+
| Return Value : Read word value from eeprom |
+----------------------------------------------------------------------------+
*/
unsigned short w_EepromReadWord(unsigned short w_PCIBoardEepromAddress, char *pc_PCIChipInformation, unsigned short w_EepromReadWord(unsigned short w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
unsigned short w_EepromStartAddress) unsigned short w_EepromStartAddress)
{ {
unsigned char b_Counter = 0; unsigned char b_Counter = 0;
unsigned char b_ReadByte = 0; unsigned char b_ReadByte = 0;
unsigned char b_ReadLowByte = 0; unsigned char b_ReadLowByte = 0;
unsigned char b_ReadHighByte = 0; unsigned char b_ReadHighByte = 0;
unsigned char b_SelectedAddressLow = 0; unsigned char b_SelectedAddressLow = 0;
unsigned char b_SelectedAddressHigh = 0; unsigned char b_SelectedAddressHigh = 0;
unsigned short w_ReadWord = 0; unsigned short w_ReadWord = 0;
/**************************/
/* Test the PCI chip type */ /* Test the PCI chip type */
/**************************/
if ((!strcmp(pc_PCIChipInformation, "S5920")) || if ((!strcmp(pc_PCIChipInformation, "S5920")) ||
(!strcmp(pc_PCIChipInformation, "S5933"))) (!strcmp(pc_PCIChipInformation, "S5933")))
{ {
for (b_Counter = 0; b_Counter < 2; b_Counter++) for (b_Counter = 0; b_Counter < 2; b_Counter++)
{ {
b_SelectedAddressLow = (w_EepromStartAddress + b_Counter) % 256; /* Read the low 8 bit part */ b_SelectedAddressLow = (w_EepromStartAddress + b_Counter) % 256; /* Read the low 8 bit part */
b_SelectedAddressHigh = (w_EepromStartAddress + b_Counter) / 256; /* Read the high 8 bit part */ b_SelectedAddressHigh = (w_EepromStartAddress + b_Counter) / 256; /* Read the high 8 bit part */
/************************************/
/* Select the load low address mode */ /* Select the load low address mode */
/************************************/
outb(NVCMD_LOAD_LOW, w_PCIBoardEepromAddress + 0x3F); outb(NVCMD_LOAD_LOW, w_PCIBoardEepromAddress + 0x3F);
/****************/
/* Wait on busy */ /* Wait on busy */
/****************/
v_EepromWaitBusy(w_PCIBoardEepromAddress); v_EepromWaitBusy(w_PCIBoardEepromAddress);
/************************/
/* Load the low address */ /* Load the low address */
/************************/
outb(b_SelectedAddressLow, outb(b_SelectedAddressLow,
w_PCIBoardEepromAddress + 0x3E); w_PCIBoardEepromAddress + 0x3E);
/****************/
/* Wait on busy */ /* Wait on busy */
/****************/
v_EepromWaitBusy(w_PCIBoardEepromAddress); v_EepromWaitBusy(w_PCIBoardEepromAddress);
/*************************************/
/* Select the load high address mode */ /* Select the load high address mode */
/*************************************/
outb(NVCMD_LOAD_HIGH, w_PCIBoardEepromAddress + 0x3F); outb(NVCMD_LOAD_HIGH, w_PCIBoardEepromAddress + 0x3F);
/****************/
/* Wait on busy */ /* Wait on busy */
/****************/
v_EepromWaitBusy(w_PCIBoardEepromAddress); v_EepromWaitBusy(w_PCIBoardEepromAddress);
/*************************/
/* Load the high address */ /* Load the high address */
/*************************/
outb(b_SelectedAddressHigh, outb(b_SelectedAddressHigh,
w_PCIBoardEepromAddress + 0x3E); w_PCIBoardEepromAddress + 0x3E);
/****************/
/* Wait on busy */ /* Wait on busy */
/****************/
v_EepromWaitBusy(w_PCIBoardEepromAddress); v_EepromWaitBusy(w_PCIBoardEepromAddress);
/************************/
/* Select the READ mode */ /* Select the READ mode */
/************************/
outb(NVCMD_BEGIN_READ, w_PCIBoardEepromAddress + 0x3F); outb(NVCMD_BEGIN_READ, w_PCIBoardEepromAddress + 0x3F);
/****************/
/* Wait on busy */ /* Wait on busy */
/****************/
v_EepromWaitBusy(w_PCIBoardEepromAddress); v_EepromWaitBusy(w_PCIBoardEepromAddress);
/*****************************/
/* Read data into the EEPROM */ /* Read data into the EEPROM */
/*****************************/
b_ReadByte = inb(w_PCIBoardEepromAddress + 0x3E); b_ReadByte = inb(w_PCIBoardEepromAddress + 0x3E);
/****************/
/* Wait on busy */ /* Wait on busy */
/****************/
v_EepromWaitBusy(w_PCIBoardEepromAddress); v_EepromWaitBusy(w_PCIBoardEepromAddress);
/*********************************/
/* Select the upper address part */ /* Select the upper address part */
/*********************************/
if (b_Counter == 0) if (b_Counter == 0)
{ {
b_ReadLowByte = b_ReadByte; b_ReadLowByte = b_ReadByte;
} /* if(b_Counter==0) */ } /* if(b_Counter==0) */
else else
{ {
b_ReadHighByte = b_ReadByte; b_ReadHighByte = b_ReadByte;
} /* if(b_Counter==0) */ } /* if(b_Counter==0) */
} /* for (b_Counter=0; b_Counter<2; b_Counter++) */ } /* for (b_Counter=0; b_Counter<2; b_Counter++) */
w_ReadWord = (b_ReadLowByte | (((unsigned short) b_ReadHighByte) * 256)); w_ReadWord = (b_ReadLowByte | (((unsigned short) b_ReadHighByte) * 256));
} /* end of if ((!strcmp(pc_PCIChipInformation, "S5920")) || (!strcmp(pc_PCIChipInformation, "S5933"))) */ } /* end of if ((!strcmp(pc_PCIChipInformation, "S5920")) || (!strcmp(pc_PCIChipInformation, "S5933"))) */
if (!strcmp(pc_PCIChipInformation, "93C76")) if (!strcmp(pc_PCIChipInformation, "93C76"))
{ {
/*************************************/
/* Read 16 bit from the EEPROM 93C76 */ /* Read 16 bit from the EEPROM 93C76 */
/*************************************/
v_EepromCs76Read(w_PCIBoardEepromAddress, w_EepromStartAddress, v_EepromCs76Read(w_PCIBoardEepromAddress, w_EepromStartAddress,
&w_ReadWord); &w_ReadWord);
} }
return w_ReadWord; return w_ReadWord;
} }
/*
+----------------------------------------------------------------------------+
| Function Name : void v_EepromWaitBusy |
| (unsigned short w_PCIBoardEepromAddress) |
+----------------------------------------------------------------------------+
| Task : Wait the busy flag from PCI controller |
+----------------------------------------------------------------------------+
| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom base address |
+----------------------------------------------------------------------------+
| Output Parameters : - |
+----------------------------------------------------------------------------+
| Return Value : - |
+----------------------------------------------------------------------------+
*/
void v_EepromWaitBusy(unsigned short w_PCIBoardEepromAddress) void v_EepromWaitBusy(unsigned short w_PCIBoardEepromAddress)
{ {
unsigned char b_EepromBusy = 0; unsigned char b_EepromBusy = 0;
do do
{ {
/*************/
/* IMPORTANT */ /* IMPORTANT */
/*************/
/************************************************************************/
/* An error has been written in the AMCC 5933 book at the page B-13 */ /* An error has been written in the AMCC 5933 book at the page B-13 */
/* Ex: if you read a byte and look for the busy statusEEPROM=0x80 and */ /* Ex: if you read a byte and look for the busy statusEEPROM=0x80 and */
/* the operator register is AMCC_OP_REG_MCSR+3 */ /* the operator register is AMCC_OP_REG_MCSR+3 */
/* unsigned short read EEPROM=0x8000 andAMCC_OP_REG_MCSR+2 */ /* unsigned short read EEPROM=0x8000 andAMCC_OP_REG_MCSR+2 */
/* unsigned int read EEPROM=0x80000000 and AMCC_OP_REG_MCSR */ /* unsigned int read EEPROM=0x80000000 and AMCC_OP_REG_MCSR */
/************************************************************************/
b_EepromBusy = inb(w_PCIBoardEepromAddress + 0x3F); b_EepromBusy = inb(w_PCIBoardEepromAddress + 0x3F);
b_EepromBusy = b_EepromBusy & 0x80; b_EepromBusy = b_EepromBusy & 0x80;
} while (b_EepromBusy == 0x80); } while (b_EepromBusy == 0x80);
} }
/*
+---------------------------------------------------------------------------------+
| Function Name : void v_EepromClock76(unsigned int dw_Address, |
| unsigned int dw_RegisterValue) |
+---------------------------------------------------------------------------------+
| Task : This function sends the clocking sequence to the EEPROM. |
+---------------------------------------------------------------------------------+
| Input Parameters : unsigned int dw_Address : PCI eeprom base address |
| unsigned int dw_RegisterValue : PCI eeprom register value to write.|
+---------------------------------------------------------------------------------+
| Output Parameters : - |
+---------------------------------------------------------------------------------+
| Return Value : - |
+---------------------------------------------------------------------------------+
*/
void v_EepromClock76(unsigned int dw_Address, unsigned int dw_RegisterValue) void v_EepromClock76(unsigned int dw_Address, unsigned int dw_RegisterValue)
{ {
/************************/
/* Set EEPROM clock Low */ /* Set EEPROM clock Low */
/************************/
outl(dw_RegisterValue & 0x6, dw_Address); outl(dw_RegisterValue & 0x6, dw_Address);
/***************/
/* Wait 0.1 ms */ /* Wait 0.1 ms */
/***************/
udelay(100); udelay(100);
/*************************/
/* Set EEPROM clock High */ /* Set EEPROM clock High */
/*************************/
outl(dw_RegisterValue | 0x1, dw_Address); outl(dw_RegisterValue | 0x1, dw_Address);
/***************/
/* Wait 0.1 ms */ /* Wait 0.1 ms */
/***************/
udelay(100); udelay(100);
} }
/*
+---------------------------------------------------------------------------------+
| Function Name : void v_EepromSendCommand76(unsigned int dw_Address, |
| unsigned int dw_EepromCommand, |
| unsigned char b_DataLengthInBits) |
+---------------------------------------------------------------------------------+
| Task : This function sends a Command to the EEPROM 93C76. |
+---------------------------------------------------------------------------------+
| Input Parameters : unsigned int dw_Address : PCI eeprom base address |
| unsigned int dw_EepromCommand : PCI eeprom command to write. |
| unsigned char b_DataLengthInBits : PCI eeprom command data length. |
+---------------------------------------------------------------------------------+
| Output Parameters : - |
+---------------------------------------------------------------------------------+
| Return Value : - |
+---------------------------------------------------------------------------------+
*/
void v_EepromSendCommand76(unsigned int dw_Address, unsigned int dw_EepromCommand, void v_EepromSendCommand76(unsigned int dw_Address, unsigned int dw_EepromCommand,
unsigned char b_DataLengthInBits) unsigned char b_DataLengthInBits)
{ {
char c_BitPos = 0; char c_BitPos = 0;
unsigned int dw_RegisterValue = 0; unsigned int dw_RegisterValue = 0;
/*****************************/
/* Enable EEPROM Chip Select */ /* Enable EEPROM Chip Select */
/*****************************/
dw_RegisterValue = 0x2; dw_RegisterValue = 0x2;
/********************************************************************/
/* Toggle EEPROM's Chip select to get it out of Shift Register Mode */ /* Toggle EEPROM's Chip select to get it out of Shift Register Mode */
/********************************************************************/
outl(dw_RegisterValue, dw_Address); outl(dw_RegisterValue, dw_Address);
/***************/
/* Wait 0.1 ms */ /* Wait 0.1 ms */
/***************/
udelay(100); udelay(100);
/*******************************************/
/* Send EEPROM command - one bit at a time */ /* Send EEPROM command - one bit at a time */
/*******************************************/
for (c_BitPos = (b_DataLengthInBits - 1); c_BitPos >= 0; c_BitPos--) for (c_BitPos = (b_DataLengthInBits - 1); c_BitPos >= 0; c_BitPos--)
{ {
/**********************************/
/* Check if current bit is 0 or 1 */ /* Check if current bit is 0 or 1 */
/**********************************/
if (dw_EepromCommand & (1 << c_BitPos)) if (dw_EepromCommand & (1 << c_BitPos))
{ {
/***********/
/* Write 1 */ /* Write 1 */
/***********/
dw_RegisterValue = dw_RegisterValue | 0x4; dw_RegisterValue = dw_RegisterValue | 0x4;
} }
else else
{ {
/***********/
/* Write 0 */ /* Write 0 */
/***********/
dw_RegisterValue = dw_RegisterValue & 0x3; dw_RegisterValue = dw_RegisterValue & 0x3;
} }
/*********************/
/* Write the command */ /* Write the command */
/*********************/
outl(dw_RegisterValue, dw_Address); outl(dw_RegisterValue, dw_Address);
/***************/
/* Wait 0.1 ms */ /* Wait 0.1 ms */
/***************/
udelay(100); udelay(100);
/****************************/
/* Trigger the EEPROM clock */ /* Trigger the EEPROM clock */
/****************************/
v_EepromClock76(dw_Address, dw_RegisterValue); v_EepromClock76(dw_Address, dw_RegisterValue);
} }
} }
/*
+---------------------------------------------------------------------------------+
| Function Name : void v_EepromCs76Read(unsigned int dw_Address, |
| unsigned short w_offset, |
| unsigned short * pw_Value) |
+---------------------------------------------------------------------------------+
| Task : This function read a value from the EEPROM 93C76. |
+---------------------------------------------------------------------------------+
| Input Parameters : unsigned int dw_Address : PCI eeprom base address |
| unsigned short w_offset : Offset of the address to read |
| unsigned short * pw_Value : PCI eeprom 16 bit read value. |
+---------------------------------------------------------------------------------+
| Output Parameters : - |
+---------------------------------------------------------------------------------+
| Return Value : - |
+---------------------------------------------------------------------------------+
*/
void v_EepromCs76Read(unsigned int dw_Address, unsigned short w_offset, unsigned short *pw_Value) void v_EepromCs76Read(unsigned int dw_Address, unsigned short w_offset, unsigned short *pw_Value)
{ {
char c_BitPos = 0; char c_BitPos = 0;
unsigned int dw_RegisterValue = 0; unsigned int dw_RegisterValue = 0;
unsigned int dw_RegisterValueRead = 0; unsigned int dw_RegisterValueRead = 0;
/*************************************************/
/* Send EEPROM read command and offset to EEPROM */ /* Send EEPROM read command and offset to EEPROM */
/*************************************************/
v_EepromSendCommand76(dw_Address, (EE_READ << 4) | (w_offset / 2), v_EepromSendCommand76(dw_Address, (EE_READ << 4) | (w_offset / 2),
EE76_CMD_LEN); EE76_CMD_LEN);
/*******************************/
/* Get the last register value */ /* Get the last register value */
/*******************************/
dw_RegisterValue = (((w_offset / 2) & 0x1) << 2) | 0x2; dw_RegisterValue = (((w_offset / 2) & 0x1) << 2) | 0x2;
/*****************************/
/* Set the 16-bit value of 0 */ /* Set the 16-bit value of 0 */
/*****************************/
*pw_Value = 0; *pw_Value = 0;
/************************/
/* Get the 16-bit value */ /* Get the 16-bit value */
/************************/
for (c_BitPos = 0; c_BitPos < 16; c_BitPos++) for (c_BitPos = 0; c_BitPos < 16; c_BitPos++)
{ {
/****************************/
/* Trigger the EEPROM clock */ /* Trigger the EEPROM clock */
/****************************/
v_EepromClock76(dw_Address, dw_RegisterValue); v_EepromClock76(dw_Address, dw_RegisterValue);
/**********************/
/* Get the result bit */ /* Get the result bit */
/**********************/
dw_RegisterValueRead = inl(dw_Address); dw_RegisterValueRead = inl(dw_Address);
/***************/
/* Wait 0.1 ms */ /* Wait 0.1 ms */
/***************/
udelay(100); udelay(100);
/***************************************/
/* Get bit value and shift into result */ /* Get bit value and shift into result */
/***************************************/
if (dw_RegisterValueRead & 0x8) if (dw_RegisterValueRead & 0x8)
{ {
/**********/
/* Read 1 */ /* Read 1 */
/**********/
*pw_Value = (*pw_Value << 1) | 0x1; *pw_Value = (*pw_Value << 1) | 0x1;
} }
else else
{ {
/**********/
/* Read 0 */ /* Read 0 */
/**********/
*pw_Value = (*pw_Value << 1); *pw_Value = (*pw_Value << 1);
} }
} }
/*************************/
/* Clear all EEPROM bits */ /* Clear all EEPROM bits */
/*************************/
dw_RegisterValue = 0x0; dw_RegisterValue = 0x0;
/********************************************************************/
/* Toggle EEPROM's Chip select to get it out of Shift Register Mode */ /* Toggle EEPROM's Chip select to get it out of Shift Register Mode */
/********************************************************************/
outl(dw_RegisterValue, dw_Address); outl(dw_RegisterValue, dw_Address);
/***************/
/* Wait 0.1 ms */ /* Wait 0.1 ms */
/***************/
udelay(100); udelay(100);
} }
/******************************************/
/* EEPROM HEADER READ FUNCTIONS */
/******************************************/
/*
+----------------------------------------------------------------------------+
| Function Name : int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress, |
| char * pc_PCIChipInformation,struct comedi_device *dev) |
+----------------------------------------------------------------------------+
| Task : Read from eeprom Main Header |
+----------------------------------------------------------------------------+
| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
| |
| char *pc_PCIChipInformation : PCI Chip Type. |
| |
| struct comedi_device *dev : comedi device structure |
| pointer |
+----------------------------------------------------------------------------+
| Output Parameters : - |
+----------------------------------------------------------------------------+
| Return Value : 0 |
+----------------------------------------------------------------------------+
*/
int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress, int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
char *pc_PCIChipInformation, struct comedi_device *dev) char *pc_PCIChipInformation, struct comedi_device *dev)
{ {
...@@ -924,27 +467,6 @@ int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress, ...@@ -924,27 +467,6 @@ int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
return 0; return 0;
} }
/*
+----------------------------------------------------------------------------+
| Function Name : int i_EepromReadDigitalInputHeader(unsigned short |
| w_PCIBoardEepromAddress,char *pc_PCIChipInformation, |
| unsigned short w_Address,struct str_DigitalInputHeader *s_Header) |
| |
+----------------------------------------------------------------------------+
| Task : Read Digital Input Header |
+----------------------------------------------------------------------------+
| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
| |
| char *pc_PCIChipInformation : PCI Chip Type. |
| |
| struct str_DigitalInputHeader *s_Header: Digita Input Header |
| Pointer |
+----------------------------------------------------------------------------+
| Output Parameters : - |
+----------------------------------------------------------------------------+
| Return Value : 0 |
+----------------------------------------------------------------------------+
*/
int i_EepromReadDigitalInputHeader(unsigned short w_PCIBoardEepromAddress, int i_EepromReadDigitalInputHeader(unsigned short w_PCIBoardEepromAddress,
char *pc_PCIChipInformation, unsigned short w_Address, char *pc_PCIChipInformation, unsigned short w_Address,
struct str_DigitalInputHeader *s_Header) struct str_DigitalInputHeader *s_Header)
...@@ -969,27 +491,6 @@ int i_EepromReadDigitalInputHeader(unsigned short w_PCIBoardEepromAddress, ...@@ -969,27 +491,6 @@ int i_EepromReadDigitalInputHeader(unsigned short w_PCIBoardEepromAddress,
return 0; return 0;
} }
/*
+----------------------------------------------------------------------------+
| Function Name : int i_EepromReadDigitalOutputHeader(unsigned short |
| w_PCIBoardEepromAddress,char *pc_PCIChipInformation, |
| unsigned short w_Address,struct str_DigitalOutputHeader *s_Header) |
| |
+----------------------------------------------------------------------------+
| Task : Read Digital Output Header |
+----------------------------------------------------------------------------+
| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
| |
| char *pc_PCIChipInformation : PCI Chip Type. |
| |
| struct str_DigitalOutputHeader *s_Header: Digital Output Header|
| Pointer |
+----------------------------------------------------------------------------+
| Output Parameters : - |
+----------------------------------------------------------------------------+
| Return Value : 0 |
+----------------------------------------------------------------------------+
*/
int i_EepromReadDigitalOutputHeader(unsigned short w_PCIBoardEepromAddress, int i_EepromReadDigitalOutputHeader(unsigned short w_PCIBoardEepromAddress,
char *pc_PCIChipInformation, unsigned short w_Address, char *pc_PCIChipInformation, unsigned short w_Address,
struct str_DigitalOutputHeader *s_Header) struct str_DigitalOutputHeader *s_Header)
...@@ -1001,26 +502,6 @@ int i_EepromReadDigitalOutputHeader(unsigned short w_PCIBoardEepromAddress, ...@@ -1001,26 +502,6 @@ int i_EepromReadDigitalOutputHeader(unsigned short w_PCIBoardEepromAddress,
return 0; return 0;
} }
/*
+----------------------------------------------------------------------------+
| Function Name : int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress, |
| char *pc_PCIChipInformation,WORD w_Address, |
| struct str_TimerMainHeader *s_Header) |
+----------------------------------------------------------------------------+
| Task : Read Timer or Watchdog Header |
+----------------------------------------------------------------------------+
| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
| |
| char *pc_PCIChipInformation : PCI Chip Type. |
| |
| struct str_TimerMainHeader *s_Header: Timer Header |
| Pointer |
+----------------------------------------------------------------------------+
| Output Parameters : - |
+----------------------------------------------------------------------------+
| Return Value : 0 |
+----------------------------------------------------------------------------+
*/
int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress, int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress,
char *pc_PCIChipInformation, unsigned short w_Address, char *pc_PCIChipInformation, unsigned short w_Address,
struct str_TimerMainHeader *s_Header) struct str_TimerMainHeader *s_Header)
...@@ -1066,27 +547,6 @@ int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress, ...@@ -1066,27 +547,6 @@ int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress,
return 0; return 0;
} }
/*
+----------------------------------------------------------------------------+
| Function Name : int i_EepromReadAnlogOutputHeader(unsigned short |
| w_PCIBoardEepromAddress,char *pc_PCIChipInformation, |
| unsigned short w_Address,str_AnalogOutputHeader *s_Header) |
+----------------------------------------------------------------------------+
| Task : Read Nalog Output Header |
+----------------------------------------------------------------------------+
| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
| |
| char *pc_PCIChipInformation : PCI Chip Type. |
| |
| str_AnalogOutputHeader *s_Header:Anlog Output Header |
| Pointer |
+----------------------------------------------------------------------------+
| Output Parameters : - |
+----------------------------------------------------------------------------+
| Return Value : 0 |
+----------------------------------------------------------------------------+
*/
int i_EepromReadAnlogOutputHeader(unsigned short w_PCIBoardEepromAddress, int i_EepromReadAnlogOutputHeader(unsigned short w_PCIBoardEepromAddress,
char *pc_PCIChipInformation, unsigned short w_Address, char *pc_PCIChipInformation, unsigned short w_Address,
struct str_AnalogOutputHeader *s_Header) struct str_AnalogOutputHeader *s_Header)
...@@ -1103,27 +563,6 @@ int i_EepromReadAnlogOutputHeader(unsigned short w_PCIBoardEepromAddress, ...@@ -1103,27 +563,6 @@ int i_EepromReadAnlogOutputHeader(unsigned short w_PCIBoardEepromAddress,
return 0; return 0;
} }
/*
+----------------------------------------------------------------------------+
| Function Name : int i_EepromReadAnlogInputHeader(unsigned short |
| w_PCIBoardEepromAddress,char *pc_PCIChipInformation, |
| unsigned short w_Address,struct str_AnalogInputHeader *s_Header) |
+----------------------------------------------------------------------------+
| Task : Read Nalog Output Header |
+----------------------------------------------------------------------------+
| Input Parameters : unsigned short w_PCIBoardEepromAddress : PCI eeprom address |
| |
| char *pc_PCIChipInformation : PCI Chip Type. |
| |
| struct str_AnalogInputHeader *s_Header:Anlog Input Header |
| Pointer |
+----------------------------------------------------------------------------+
| Output Parameters : - |
+----------------------------------------------------------------------------+
| Return Value : 0 |
+----------------------------------------------------------------------------+
*/
/* Reads only for ONE hardware component */ /* Reads only for ONE hardware component */
int i_EepromReadAnlogInputHeader(unsigned short w_PCIBoardEepromAddress, int i_EepromReadAnlogInputHeader(unsigned short w_PCIBoardEepromAddress,
char *pc_PCIChipInformation, unsigned short w_Address, char *pc_PCIChipInformation, unsigned short w_Address,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment